1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 #include <sys/types.h> 30 #include <sys/systm.h> 31 #include <sys/archsystm.h> 32 #include <sys/machsystm.h> 33 #include <sys/disp.h> 34 #include <sys/autoconf.h> 35 #include <sys/promif.h> 36 #include <sys/prom_plat.h> 37 #include <sys/clock.h> 38 #include <sys/pte.h> 39 #include <sys/scb.h> 40 #include <sys/cpu.h> 41 #include <sys/stack.h> 42 #include <sys/intreg.h> 43 #include <sys/ivintr.h> 44 #include <vm/as.h> 45 #include <vm/hat_sfmmu.h> 46 #include <sys/reboot.h> 47 #include <sys/sysmacros.h> 48 #include <sys/vtrace.h> 49 #include <sys/trap.h> 50 #include <sys/machtrap.h> 51 #include <sys/privregs.h> 52 #include <sys/machpcb.h> 53 #include <sys/proc.h> 54 #include <sys/cpupart.h> 55 #include <sys/pset.h> 56 #include <sys/cpu_module.h> 57 #include <sys/copyops.h> 58 #include <sys/panic.h> 59 #include <sys/bootconf.h> /* for bootops */ 60 #include <sys/chip.h> 61 #include <sys/kdi.h> 62 #include <sys/fpras.h> 63 64 #include <sys/prom_debug.h> 65 #include <sys/debug.h> 66 67 #include <sys/sunddi.h> 68 #include <sys/lgrp.h> 69 #include <sys/traptrace.h> 70 /* 71 * External Routines: 72 */ 73 extern void map_wellknown_devices(void); 74 75 int dcache_size; 76 int dcache_linesize; 77 int icache_size; 78 int icache_linesize; 79 int ecache_size; 80 int ecache_alignsize; 81 int ecache_associativity; 82 int ecache_setsize; /* max possible e$ setsize */ 83 int cpu_setsize; /* max e$ setsize of configured cpus */ 84 int dcache_line_mask; /* spitfire only */ 85 int vac_size; /* cache size in bytes */ 86 uint_t vac_mask; /* VAC alignment consistency mask */ 87 int vac_shift; /* log2(vac_size) for ppmapout() */ 88 int vac = 0; /* virtual address cache type (none == 0) */ 89 90 /* 91 * fpRAS. An individual sun4* machine class (or perhaps subclass, 92 * eg sun4u/cheetah) must set fpras_implemented to indicate that it implements 93 * the fpRAS feature. The feature can be suppressed by setting fpras_disable 94 * or the mechanism can be disabled for individual copy operations with 95 * fpras_disableids. All these are checked in post_startup() code so 96 * fpras_disable and fpras_disableids can be set in /etc/system. 97 * If/when fpRAS is implemented on non-sun4 architectures these 98 * definitions will need to move up to the common level. 99 */ 100 int fpras_implemented; 101 int fpras_disable; 102 int fpras_disableids; 103 104 /* 105 * Static Routines: 106 */ 107 static void kern_splr_preprom(void); 108 static void kern_splx_postprom(void); 109 110 /* 111 * Setup routine called right before main(). Interposing this function 112 * before main() allows us to call it in a machine-independent fashion. 113 */ 114 115 void 116 mlsetup(struct regs *rp, void *cif, kfpu_t *fp) 117 { 118 struct machpcb *mpcb; 119 120 extern char t0stack[]; 121 extern struct classfuncs sys_classfuncs; 122 extern disp_t cpu0_disp; 123 unsigned long long pa; 124 125 #ifdef TRAPTRACE 126 TRAP_TRACE_CTL *ctlp; 127 #endif /* TRAPTRACE */ 128 129 /* 130 * initialize cpu_self 131 */ 132 cpu0.cpu_self = &cpu0; 133 134 /* 135 * initialize t0 136 */ 137 t0.t_stk = (caddr_t)rp - REGOFF; 138 /* Can't use va_to_pa here - wait until prom_ initialized */ 139 t0.t_stkbase = t0stack; 140 t0.t_pri = maxclsyspri - 3; 141 t0.t_schedflag = TS_LOAD | TS_DONT_SWAP; 142 t0.t_procp = &p0; 143 t0.t_plockp = &p0lock.pl_lock; 144 t0.t_lwp = &lwp0; 145 t0.t_forw = &t0; 146 t0.t_back = &t0; 147 t0.t_next = &t0; 148 t0.t_prev = &t0; 149 t0.t_cpu = &cpu0; /* loaded by _start */ 150 t0.t_disp_queue = &cpu0_disp; 151 t0.t_bind_cpu = PBIND_NONE; 152 t0.t_bind_pset = PS_NONE; 153 t0.t_cpupart = &cp_default; 154 t0.t_clfuncs = &sys_classfuncs.thread; 155 t0.t_copyops = NULL; 156 THREAD_ONPROC(&t0, CPU); 157 158 lwp0.lwp_thread = &t0; 159 lwp0.lwp_procp = &p0; 160 lwp0.lwp_regs = (void *)rp; 161 t0.t_tid = p0.p_lwpcnt = p0.p_lwprcnt = p0.p_lwpid = 1; 162 163 mpcb = lwptompcb(&lwp0); 164 mpcb->mpcb_fpu = fp; 165 mpcb->mpcb_fpu->fpu_q = mpcb->mpcb_fpu_q; 166 mpcb->mpcb_thread = &t0; 167 lwp0.lwp_fpu = (void *)mpcb->mpcb_fpu; 168 169 p0.p_exec = NULL; 170 p0.p_stat = SRUN; 171 p0.p_flag = SSYS; 172 p0.p_tlist = &t0; 173 p0.p_stksize = 2*PAGESIZE; 174 p0.p_stkpageszc = 0; 175 p0.p_as = &kas; 176 p0.p_lockp = &p0lock; 177 p0.p_utraps = NULL; 178 p0.p_brkpageszc = 0; 179 sigorset(&p0.p_ignore, &ignoredefault); 180 181 CPU->cpu_thread = &t0; 182 CPU->cpu_dispthread = &t0; 183 bzero(&cpu0_disp, sizeof (disp_t)); 184 CPU->cpu_disp = &cpu0_disp; 185 CPU->cpu_disp->disp_cpu = CPU; 186 CPU->cpu_idle_thread = &t0; 187 CPU->cpu_flags = CPU_RUNNING; 188 CPU->cpu_id = getprocessorid(); 189 CPU->cpu_dispatch_pri = t0.t_pri; 190 191 /* 192 * Initialize thread/cpu microstate accounting here 193 */ 194 init_mstate(&t0, LMS_SYSTEM); 195 init_cpu_mstate(CPU, CMS_SYSTEM); 196 197 /* 198 * Initialize lists of available and active CPUs. 199 */ 200 cpu_list_init(CPU); 201 202 cpu_vm_data_init(CPU); 203 204 prom_init("kernel", cif); 205 (void) prom_set_preprom(kern_splr_preprom); 206 (void) prom_set_postprom(kern_splx_postprom); 207 208 PRM_INFO("mlsetup: now ok to call prom_printf"); 209 210 mpcb->mpcb_pa = va_to_pa(t0.t_stk); 211 212 /* 213 * Claim the physical and virtual resources used by panicbuf, 214 * then map panicbuf. This operation removes the phys and 215 * virtual addresses from the free lists. 216 */ 217 if (prom_claim_virt(PANICBUFSIZE, panicbuf) != panicbuf) 218 prom_panic("Can't claim panicbuf virtual address"); 219 220 if (prom_retain("panicbuf", PANICBUFSIZE, MMU_PAGESIZE, &pa) != 0) 221 prom_panic("Can't allocate retained panicbuf physical address"); 222 223 if (prom_map_phys(-1, PANICBUFSIZE, panicbuf, pa) != 0) 224 prom_panic("Can't map panicbuf"); 225 226 PRM_DEBUG(panicbuf); 227 PRM_DEBUG(pa); 228 229 #ifdef TRAPTRACE 230 /* 231 * initialize the trap trace buffer for the boot cpu 232 * XXX todo, dynamically allocate this buffer too 233 */ 234 ctlp = &trap_trace_ctl[CPU->cpu_id]; 235 ctlp->d.vaddr_base = trap_tr0; 236 ctlp->d.offset = ctlp->d.last_offset = 0; 237 ctlp->d.limit = TRAP_TSIZE; /* XXX dynamic someday */ 238 ctlp->d.paddr_base = va_to_pa(trap_tr0); 239 #endif /* TRAPTRACE */ 240 /* 241 * initialize HV trap trace buffer for the boot cpu 242 */ 243 mach_htraptrace_setup(CPU->cpu_id); 244 mach_htraptrace_configure(CPU->cpu_id); 245 246 /* 247 * lgroup framework initialization. This must be done prior 248 * to devices being mapped. 249 */ 250 lgrp_init(); 251 252 cpu_setup(); 253 254 if (boothowto & RB_HALT) { 255 prom_printf("unix: kernel halted by -h flag\n"); 256 prom_enter_mon(); 257 } 258 259 setcputype(); 260 map_wellknown_devices(); 261 setcpudelay(); 262 263 /* 264 * Associate the boot cpu with a physical processor. 265 * This needs to be done after devices are mapped, since 266 * we need to know what type of physical processor this is. 267 * (CMP for example) 268 */ 269 chip_cpu_init(CPU); 270 chip_cpu_assign(CPU); 271 } 272 273 /* 274 * These routines are called immediately before and 275 * immediately after calling into the firmware. The 276 * firmware is significantly confused by preemption - 277 * particularly on MP machines - but also on UP's too. 278 */ 279 280 static int saved_spl; 281 282 static void 283 kern_splr_preprom(void) 284 { 285 saved_spl = spl7(); 286 } 287 288 static void 289 kern_splx_postprom(void) 290 { 291 splx(saved_spl); 292 } 293