xref: /titanic_44/usr/src/uts/sparc/scsa2usb/Makefile (revision 940c61f284366ef6845abe1c4002504280d7f0f2)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23# Use is subject to license terms.
24#
25# Copyright 2014 Garrett D'Amore <garrett@damore.org>
26#
27# uts/sparc/scsa2usb/Makefile
28#
29#	This makefile drives the production of the scsa2usb driver
30#	kernel module. sparc architecture dependent
31#
32
33
34#
35#	Path to the base of the uts directory tree (usually /usr/src/uts).
36#
37UTSBASE = ../..
38
39#
40#	Define the module and object file sets.
41#
42MODULE		= scsa2usb
43OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
44LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
45ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
46CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
47WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
48WARLOCK_OK	= $(MODULE).ok
49WLCMD_DIR       = $(UTSBASE)/common/io/warlock
50
51#
52#	Include common rules.
53#
54include $(UTSBASE)/sparc/Makefile.sparc
55
56#
57# lint pass one enforcement
58#
59CFLAGS += $(CCVERBOSE)
60
61# depends on misc/usba misc/scsi
62#
63LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
64
65#
66#	Define targets
67#
68ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
69LINT_TARGET	= $(MODULE).lint
70INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
71
72CERRWARN	+= -_gcc=-Wno-unused-label
73CERRWARN	+= -_gcc=-Wno-uninitialized
74
75#
76# For now, disable these lint checks; maintainers should endeavor
77# to investigate and remove these for maximum lint coverage.
78# Please do not carry these forward to new Makefiles.
79#
80LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
81
82.KEEP_STATE:
83
84all:		$(ALL_DEPS)
85
86def:		$(DEF_DEPS)
87
88clean:		$(CLEAN_DEPS)
89		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
90
91clobber:	$(CLOBBER_DEPS)
92		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
93
94lint:		$(LINT_DEPS)
95
96modlintlib:	$(MODLINTLIB_DEPS)
97
98clean.lint:	$(CLEAN_LINT_DEPS)
99
100install:	$(INSTALL_DEPS)
101
102#
103#	Include common targets.
104#
105include $(UTSBASE)/sparc/Makefile.targ
106
107#
108#	Defines for local commands.
109#
110WARLOCK		= warlock
111WLCC		= wlcc
112TOUCH		= touch
113TEST		= test
114
115#
116#	lock_lint rules
117#
118USBA_FILES = $(USBA_OBJS:%.o=../usba/%.ll)
119UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
120OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
121EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
122SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
123ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
124SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
125CMLB_FILES = $(CMLB_OBJS:%.o=-l ../cmlb/%.ll)
126
127warlock: $(WARLOCK_OK) warlock_with_usba
128
129$(WARLOCK_OK): $(WARLOCK_OUT) $(WLCMD_DIR)/scsa2usb.wlcmd warlock_ddi.files \
130	scsi.files
131	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT)  \
132		../warlock/scsi.ll \
133		-l ../warlock/ddi_dki_impl.ll \
134		$(SCSI_FILES)
135	$(TOUCH) $@
136
137%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
138		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
139		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
140		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
141	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
142
143warlock_with_usba: $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd  $(WARLOCK_OUT) \
144	usba_files ohci_files ehci_files uhci_files warlock_ddi.files sd.files \
145	st.files scsi.files cmlb.files
146	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
147		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
148		$(SD_FILES) \
149		$(ST_FILES) \
150		$(SCSI_FILES) \
151		$(CMLB_FILES) \
152		$(WARLOCK_OUT) \
153		-l ../warlock/ddi_dki_impl.ll
154
155usba_files:
156	@cd ../usba;pwd; $(MAKE) warlock
157
158uhci_files:
159	@cd ../uhci;pwd; $(MAKE) warlock
160
161ohci_files:
162	@cd ../ohci;pwd; $(MAKE) warlock
163
164ehci_files:
165	@cd ../ehci;pwd; $(MAKE) warlock
166
167warlock_ddi.files:
168	@cd ../warlock; pwd; $(MAKE) warlock
169
170scsi.files:
171	@cd ../scsi; pwd; $(MAKE) warlock
172
173sd.files:
174	@cd ../sd; pwd; $(MAKE) warlock_alone
175
176cmlb.files:
177	@cd ../cmlb; pwd; $(MAKE) warlock
178
179st.files:
180	@cd ../st; pwd; $(MAKE) warlock_alone
181