1 /****************************************************************************** 2 * 3 * Module Name: psargs - Parse AML opcode arguments 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2011, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #define __PSARGS_C__ 45 46 #include "acpi.h" 47 #include "accommon.h" 48 #include "acparser.h" 49 #include "amlcode.h" 50 #include "acnamesp.h" 51 #include "acdispat.h" 52 53 #define _COMPONENT ACPI_PARSER 54 ACPI_MODULE_NAME ("psargs") 55 56 /* Local prototypes */ 57 58 static UINT32 59 AcpiPsGetNextPackageLength ( 60 ACPI_PARSE_STATE *ParserState); 61 62 static ACPI_PARSE_OBJECT * 63 AcpiPsGetNextField ( 64 ACPI_PARSE_STATE *ParserState); 65 66 67 /******************************************************************************* 68 * 69 * FUNCTION: AcpiPsGetNextPackageLength 70 * 71 * PARAMETERS: ParserState - Current parser state object 72 * 73 * RETURN: Decoded package length. On completion, the AML pointer points 74 * past the length byte or bytes. 75 * 76 * DESCRIPTION: Decode and return a package length field. 77 * Note: Largest package length is 28 bits, from ACPI specification 78 * 79 ******************************************************************************/ 80 81 static UINT32 82 AcpiPsGetNextPackageLength ( 83 ACPI_PARSE_STATE *ParserState) 84 { 85 UINT8 *Aml = ParserState->Aml; 86 UINT32 PackageLength = 0; 87 UINT32 ByteCount; 88 UINT8 ByteZeroMask = 0x3F; /* Default [0:5] */ 89 90 91 ACPI_FUNCTION_TRACE (PsGetNextPackageLength); 92 93 94 /* 95 * Byte 0 bits [6:7] contain the number of additional bytes 96 * used to encode the package length, either 0,1,2, or 3 97 */ 98 ByteCount = (Aml[0] >> 6); 99 ParserState->Aml += ((ACPI_SIZE) ByteCount + 1); 100 101 /* Get bytes 3, 2, 1 as needed */ 102 103 while (ByteCount) 104 { 105 /* 106 * Final bit positions for the package length bytes: 107 * Byte3->[20:27] 108 * Byte2->[12:19] 109 * Byte1->[04:11] 110 * Byte0->[00:03] 111 */ 112 PackageLength |= (Aml[ByteCount] << ((ByteCount << 3) - 4)); 113 114 ByteZeroMask = 0x0F; /* Use bits [0:3] of byte 0 */ 115 ByteCount--; 116 } 117 118 /* Byte 0 is a special case, either bits [0:3] or [0:5] are used */ 119 120 PackageLength |= (Aml[0] & ByteZeroMask); 121 return_UINT32 (PackageLength); 122 } 123 124 125 /******************************************************************************* 126 * 127 * FUNCTION: AcpiPsGetNextPackageEnd 128 * 129 * PARAMETERS: ParserState - Current parser state object 130 * 131 * RETURN: Pointer to end-of-package +1 132 * 133 * DESCRIPTION: Get next package length and return a pointer past the end of 134 * the package. Consumes the package length field 135 * 136 ******************************************************************************/ 137 138 UINT8 * 139 AcpiPsGetNextPackageEnd ( 140 ACPI_PARSE_STATE *ParserState) 141 { 142 UINT8 *Start = ParserState->Aml; 143 UINT32 PackageLength; 144 145 146 ACPI_FUNCTION_TRACE (PsGetNextPackageEnd); 147 148 149 /* Function below updates ParserState->Aml */ 150 151 PackageLength = AcpiPsGetNextPackageLength (ParserState); 152 153 return_PTR (Start + PackageLength); /* end of package */ 154 } 155 156 157 /******************************************************************************* 158 * 159 * FUNCTION: AcpiPsGetNextNamestring 160 * 161 * PARAMETERS: ParserState - Current parser state object 162 * 163 * RETURN: Pointer to the start of the name string (pointer points into 164 * the AML. 165 * 166 * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name 167 * prefix characters. Set parser state to point past the string. 168 * (Name is consumed from the AML.) 169 * 170 ******************************************************************************/ 171 172 char * 173 AcpiPsGetNextNamestring ( 174 ACPI_PARSE_STATE *ParserState) 175 { 176 UINT8 *Start = ParserState->Aml; 177 UINT8 *End = ParserState->Aml; 178 179 180 ACPI_FUNCTION_TRACE (PsGetNextNamestring); 181 182 183 /* Point past any namestring prefix characters (backslash or carat) */ 184 185 while (AcpiPsIsPrefixChar (*End)) 186 { 187 End++; 188 } 189 190 /* Decode the path prefix character */ 191 192 switch (*End) 193 { 194 case 0: 195 196 /* NullName */ 197 198 if (End == Start) 199 { 200 Start = NULL; 201 } 202 End++; 203 break; 204 205 case AML_DUAL_NAME_PREFIX: 206 207 /* Two name segments */ 208 209 End += 1 + (2 * ACPI_NAME_SIZE); 210 break; 211 212 case AML_MULTI_NAME_PREFIX_OP: 213 214 /* Multiple name segments, 4 chars each, count in next byte */ 215 216 End += 2 + (*(End + 1) * ACPI_NAME_SIZE); 217 break; 218 219 default: 220 221 /* Single name segment */ 222 223 End += ACPI_NAME_SIZE; 224 break; 225 } 226 227 ParserState->Aml = End; 228 return_PTR ((char *) Start); 229 } 230 231 232 /******************************************************************************* 233 * 234 * FUNCTION: AcpiPsGetNextNamepath 235 * 236 * PARAMETERS: ParserState - Current parser state object 237 * Arg - Where the namepath will be stored 238 * ArgCount - If the namepath points to a control method 239 * the method's argument is returned here. 240 * PossibleMethodCall - Whether the namepath can possibly be the 241 * start of a method call 242 * 243 * RETURN: Status 244 * 245 * DESCRIPTION: Get next name (if method call, return # of required args). 246 * Names are looked up in the internal namespace to determine 247 * if the name represents a control method. If a method 248 * is found, the number of arguments to the method is returned. 249 * This information is critical for parsing to continue correctly. 250 * 251 ******************************************************************************/ 252 253 ACPI_STATUS 254 AcpiPsGetNextNamepath ( 255 ACPI_WALK_STATE *WalkState, 256 ACPI_PARSE_STATE *ParserState, 257 ACPI_PARSE_OBJECT *Arg, 258 BOOLEAN PossibleMethodCall) 259 { 260 ACPI_STATUS Status; 261 char *Path; 262 ACPI_PARSE_OBJECT *NameOp; 263 ACPI_OPERAND_OBJECT *MethodDesc; 264 ACPI_NAMESPACE_NODE *Node; 265 UINT8 *Start = ParserState->Aml; 266 267 268 ACPI_FUNCTION_TRACE (PsGetNextNamepath); 269 270 271 Path = AcpiPsGetNextNamestring (ParserState); 272 AcpiPsInitOp (Arg, AML_INT_NAMEPATH_OP); 273 274 /* Null path case is allowed, just exit */ 275 276 if (!Path) 277 { 278 Arg->Common.Value.Name = Path; 279 return_ACPI_STATUS (AE_OK); 280 } 281 282 /* 283 * Lookup the name in the internal namespace, starting with the current 284 * scope. We don't want to add anything new to the namespace here, 285 * however, so we use MODE_EXECUTE. 286 * Allow searching of the parent tree, but don't open a new scope - 287 * we just want to lookup the object (must be mode EXECUTE to perform 288 * the upsearch) 289 */ 290 Status = AcpiNsLookup (WalkState->ScopeInfo, Path, 291 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, 292 ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, NULL, &Node); 293 294 /* 295 * If this name is a control method invocation, we must 296 * setup the method call 297 */ 298 if (ACPI_SUCCESS (Status) && 299 PossibleMethodCall && 300 (Node->Type == ACPI_TYPE_METHOD)) 301 { 302 if (WalkState->Opcode == AML_UNLOAD_OP) 303 { 304 /* 305 * AcpiPsGetNextNamestring has increased the AML pointer, 306 * so we need to restore the saved AML pointer for method call. 307 */ 308 WalkState->ParserState.Aml = Start; 309 WalkState->ArgCount = 1; 310 AcpiPsInitOp (Arg, AML_INT_METHODCALL_OP); 311 return_ACPI_STATUS (AE_OK); 312 } 313 314 /* This name is actually a control method invocation */ 315 316 MethodDesc = AcpiNsGetAttachedObject (Node); 317 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, 318 "Control Method - %p Desc %p Path=%p\n", Node, MethodDesc, Path)); 319 320 NameOp = AcpiPsAllocOp (AML_INT_NAMEPATH_OP); 321 if (!NameOp) 322 { 323 return_ACPI_STATUS (AE_NO_MEMORY); 324 } 325 326 /* Change Arg into a METHOD CALL and attach name to it */ 327 328 AcpiPsInitOp (Arg, AML_INT_METHODCALL_OP); 329 NameOp->Common.Value.Name = Path; 330 331 /* Point METHODCALL/NAME to the METHOD Node */ 332 333 NameOp->Common.Node = Node; 334 AcpiPsAppendArg (Arg, NameOp); 335 336 if (!MethodDesc) 337 { 338 ACPI_ERROR ((AE_INFO, 339 "Control Method %p has no attached object", 340 Node)); 341 return_ACPI_STATUS (AE_AML_INTERNAL); 342 } 343 344 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE, 345 "Control Method - %p Args %X\n", 346 Node, MethodDesc->Method.ParamCount)); 347 348 /* Get the number of arguments to expect */ 349 350 WalkState->ArgCount = MethodDesc->Method.ParamCount; 351 return_ACPI_STATUS (AE_OK); 352 } 353 354 /* 355 * Special handling if the name was not found during the lookup - 356 * some NotFound cases are allowed 357 */ 358 if (Status == AE_NOT_FOUND) 359 { 360 /* 1) NotFound is ok during load pass 1/2 (allow forward references) */ 361 362 if ((WalkState->ParseFlags & ACPI_PARSE_MODE_MASK) != 363 ACPI_PARSE_EXECUTE) 364 { 365 Status = AE_OK; 366 } 367 368 /* 2) NotFound during a CondRefOf(x) is ok by definition */ 369 370 else if (WalkState->Op->Common.AmlOpcode == AML_COND_REF_OF_OP) 371 { 372 Status = AE_OK; 373 } 374 375 /* 376 * 3) NotFound while building a Package is ok at this point, we 377 * may flag as an error later if slack mode is not enabled. 378 * (Some ASL code depends on allowing this behavior) 379 */ 380 else if ((Arg->Common.Parent) && 381 ((Arg->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) || 382 (Arg->Common.Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP))) 383 { 384 Status = AE_OK; 385 } 386 } 387 388 /* Final exception check (may have been changed from code above) */ 389 390 if (ACPI_FAILURE (Status)) 391 { 392 ACPI_ERROR_NAMESPACE (Path, Status); 393 394 if ((WalkState->ParseFlags & ACPI_PARSE_MODE_MASK) == 395 ACPI_PARSE_EXECUTE) 396 { 397 /* Report a control method execution error */ 398 399 Status = AcpiDsMethodError (Status, WalkState); 400 } 401 } 402 403 /* Save the namepath */ 404 405 Arg->Common.Value.Name = Path; 406 return_ACPI_STATUS (Status); 407 } 408 409 410 /******************************************************************************* 411 * 412 * FUNCTION: AcpiPsGetNextSimpleArg 413 * 414 * PARAMETERS: ParserState - Current parser state object 415 * ArgType - The argument type (AML_*_ARG) 416 * Arg - Where the argument is returned 417 * 418 * RETURN: None 419 * 420 * DESCRIPTION: Get the next simple argument (constant, string, or namestring) 421 * 422 ******************************************************************************/ 423 424 void 425 AcpiPsGetNextSimpleArg ( 426 ACPI_PARSE_STATE *ParserState, 427 UINT32 ArgType, 428 ACPI_PARSE_OBJECT *Arg) 429 { 430 UINT32 Length; 431 UINT16 Opcode; 432 UINT8 *Aml = ParserState->Aml; 433 434 435 ACPI_FUNCTION_TRACE_U32 (PsGetNextSimpleArg, ArgType); 436 437 438 switch (ArgType) 439 { 440 case ARGP_BYTEDATA: 441 442 /* Get 1 byte from the AML stream */ 443 444 Opcode = AML_BYTE_OP; 445 Arg->Common.Value.Integer = (UINT64) *Aml; 446 Length = 1; 447 break; 448 449 450 case ARGP_WORDDATA: 451 452 /* Get 2 bytes from the AML stream */ 453 454 Opcode = AML_WORD_OP; 455 ACPI_MOVE_16_TO_64 (&Arg->Common.Value.Integer, Aml); 456 Length = 2; 457 break; 458 459 460 case ARGP_DWORDDATA: 461 462 /* Get 4 bytes from the AML stream */ 463 464 Opcode = AML_DWORD_OP; 465 ACPI_MOVE_32_TO_64 (&Arg->Common.Value.Integer, Aml); 466 Length = 4; 467 break; 468 469 470 case ARGP_QWORDDATA: 471 472 /* Get 8 bytes from the AML stream */ 473 474 Opcode = AML_QWORD_OP; 475 ACPI_MOVE_64_TO_64 (&Arg->Common.Value.Integer, Aml); 476 Length = 8; 477 break; 478 479 480 case ARGP_CHARLIST: 481 482 /* Get a pointer to the string, point past the string */ 483 484 Opcode = AML_STRING_OP; 485 Arg->Common.Value.String = ACPI_CAST_PTR (char, Aml); 486 487 /* Find the null terminator */ 488 489 Length = 0; 490 while (Aml[Length]) 491 { 492 Length++; 493 } 494 Length++; 495 break; 496 497 498 case ARGP_NAME: 499 case ARGP_NAMESTRING: 500 501 AcpiPsInitOp (Arg, AML_INT_NAMEPATH_OP); 502 Arg->Common.Value.Name = AcpiPsGetNextNamestring (ParserState); 503 return_VOID; 504 505 506 default: 507 508 ACPI_ERROR ((AE_INFO, "Invalid ArgType 0x%X", ArgType)); 509 return_VOID; 510 } 511 512 AcpiPsInitOp (Arg, Opcode); 513 ParserState->Aml += Length; 514 return_VOID; 515 } 516 517 518 /******************************************************************************* 519 * 520 * FUNCTION: AcpiPsGetNextField 521 * 522 * PARAMETERS: ParserState - Current parser state object 523 * 524 * RETURN: A newly allocated FIELD op 525 * 526 * DESCRIPTION: Get next field (NamedField, ReservedField, or AccessField) 527 * 528 ******************************************************************************/ 529 530 static ACPI_PARSE_OBJECT * 531 AcpiPsGetNextField ( 532 ACPI_PARSE_STATE *ParserState) 533 { 534 UINT32 AmlOffset = (UINT32) 535 ACPI_PTR_DIFF (ParserState->Aml, 536 ParserState->AmlStart); 537 ACPI_PARSE_OBJECT *Field; 538 UINT16 Opcode; 539 UINT32 Name; 540 541 542 ACPI_FUNCTION_TRACE (PsGetNextField); 543 544 545 /* Determine field type */ 546 547 switch (ACPI_GET8 (ParserState->Aml)) 548 { 549 default: 550 551 Opcode = AML_INT_NAMEDFIELD_OP; 552 break; 553 554 case 0x00: 555 556 Opcode = AML_INT_RESERVEDFIELD_OP; 557 ParserState->Aml++; 558 break; 559 560 case 0x01: 561 562 Opcode = AML_INT_ACCESSFIELD_OP; 563 ParserState->Aml++; 564 break; 565 } 566 567 /* Allocate a new field op */ 568 569 Field = AcpiPsAllocOp (Opcode); 570 if (!Field) 571 { 572 return_PTR (NULL); 573 } 574 575 Field->Common.AmlOffset = AmlOffset; 576 577 /* Decode the field type */ 578 579 switch (Opcode) 580 { 581 case AML_INT_NAMEDFIELD_OP: 582 583 /* Get the 4-character name */ 584 585 ACPI_MOVE_32_TO_32 (&Name, ParserState->Aml); 586 AcpiPsSetName (Field, Name); 587 ParserState->Aml += ACPI_NAME_SIZE; 588 589 /* Get the length which is encoded as a package length */ 590 591 Field->Common.Value.Size = AcpiPsGetNextPackageLength (ParserState); 592 break; 593 594 595 case AML_INT_RESERVEDFIELD_OP: 596 597 /* Get the length which is encoded as a package length */ 598 599 Field->Common.Value.Size = AcpiPsGetNextPackageLength (ParserState); 600 break; 601 602 603 case AML_INT_ACCESSFIELD_OP: 604 605 /* 606 * Get AccessType and AccessAttrib and merge into the field Op 607 * AccessType is first operand, AccessAttribute is second 608 */ 609 Field->Common.Value.Integer = (((UINT32) ACPI_GET8 (ParserState->Aml) << 8)); 610 ParserState->Aml++; 611 Field->Common.Value.Integer |= ACPI_GET8 (ParserState->Aml); 612 ParserState->Aml++; 613 break; 614 615 default: 616 617 /* Opcode was set in previous switch */ 618 break; 619 } 620 621 return_PTR (Field); 622 } 623 624 625 /******************************************************************************* 626 * 627 * FUNCTION: AcpiPsGetNextArg 628 * 629 * PARAMETERS: WalkState - Current state 630 * ParserState - Current parser state object 631 * ArgType - The argument type (AML_*_ARG) 632 * ReturnArg - Where the next arg is returned 633 * 634 * RETURN: Status, and an op object containing the next argument. 635 * 636 * DESCRIPTION: Get next argument (including complex list arguments that require 637 * pushing the parser stack) 638 * 639 ******************************************************************************/ 640 641 ACPI_STATUS 642 AcpiPsGetNextArg ( 643 ACPI_WALK_STATE *WalkState, 644 ACPI_PARSE_STATE *ParserState, 645 UINT32 ArgType, 646 ACPI_PARSE_OBJECT **ReturnArg) 647 { 648 ACPI_PARSE_OBJECT *Arg = NULL; 649 ACPI_PARSE_OBJECT *Prev = NULL; 650 ACPI_PARSE_OBJECT *Field; 651 UINT32 Subop; 652 ACPI_STATUS Status = AE_OK; 653 654 655 ACPI_FUNCTION_TRACE_PTR (PsGetNextArg, ParserState); 656 657 658 switch (ArgType) 659 { 660 case ARGP_BYTEDATA: 661 case ARGP_WORDDATA: 662 case ARGP_DWORDDATA: 663 case ARGP_CHARLIST: 664 case ARGP_NAME: 665 case ARGP_NAMESTRING: 666 667 /* Constants, strings, and namestrings are all the same size */ 668 669 Arg = AcpiPsAllocOp (AML_BYTE_OP); 670 if (!Arg) 671 { 672 return_ACPI_STATUS (AE_NO_MEMORY); 673 } 674 AcpiPsGetNextSimpleArg (ParserState, ArgType, Arg); 675 break; 676 677 678 case ARGP_PKGLENGTH: 679 680 /* Package length, nothing returned */ 681 682 ParserState->PkgEnd = AcpiPsGetNextPackageEnd (ParserState); 683 break; 684 685 686 case ARGP_FIELDLIST: 687 688 if (ParserState->Aml < ParserState->PkgEnd) 689 { 690 /* Non-empty list */ 691 692 while (ParserState->Aml < ParserState->PkgEnd) 693 { 694 Field = AcpiPsGetNextField (ParserState); 695 if (!Field) 696 { 697 return_ACPI_STATUS (AE_NO_MEMORY); 698 } 699 700 if (Prev) 701 { 702 Prev->Common.Next = Field; 703 } 704 else 705 { 706 Arg = Field; 707 } 708 Prev = Field; 709 } 710 711 /* Skip to End of byte data */ 712 713 ParserState->Aml = ParserState->PkgEnd; 714 } 715 break; 716 717 718 case ARGP_BYTELIST: 719 720 if (ParserState->Aml < ParserState->PkgEnd) 721 { 722 /* Non-empty list */ 723 724 Arg = AcpiPsAllocOp (AML_INT_BYTELIST_OP); 725 if (!Arg) 726 { 727 return_ACPI_STATUS (AE_NO_MEMORY); 728 } 729 730 /* Fill in bytelist data */ 731 732 Arg->Common.Value.Size = (UINT32) 733 ACPI_PTR_DIFF (ParserState->PkgEnd, ParserState->Aml); 734 Arg->Named.Data = ParserState->Aml; 735 736 /* Skip to End of byte data */ 737 738 ParserState->Aml = ParserState->PkgEnd; 739 } 740 break; 741 742 743 case ARGP_TARGET: 744 case ARGP_SUPERNAME: 745 case ARGP_SIMPLENAME: 746 747 Subop = AcpiPsPeekOpcode (ParserState); 748 if (Subop == 0 || 749 AcpiPsIsLeadingChar (Subop) || 750 AcpiPsIsPrefixChar (Subop)) 751 { 752 /* NullName or NameString */ 753 754 Arg = AcpiPsAllocOp (AML_INT_NAMEPATH_OP); 755 if (!Arg) 756 { 757 return_ACPI_STATUS (AE_NO_MEMORY); 758 } 759 760 /* To support SuperName arg of Unload */ 761 762 if (WalkState->Opcode == AML_UNLOAD_OP) 763 { 764 Status = AcpiPsGetNextNamepath (WalkState, ParserState, Arg, 1); 765 766 /* 767 * If the SuperName arg of Unload is a method call, 768 * we have restored the AML pointer, just free this Arg 769 */ 770 if (Arg->Common.AmlOpcode == AML_INT_METHODCALL_OP) 771 { 772 AcpiPsFreeOp (Arg); 773 Arg = NULL; 774 } 775 } 776 else 777 { 778 Status = AcpiPsGetNextNamepath (WalkState, ParserState, Arg, 0); 779 } 780 } 781 else 782 { 783 /* Single complex argument, nothing returned */ 784 785 WalkState->ArgCount = 1; 786 } 787 break; 788 789 790 case ARGP_DATAOBJ: 791 case ARGP_TERMARG: 792 793 /* Single complex argument, nothing returned */ 794 795 WalkState->ArgCount = 1; 796 break; 797 798 799 case ARGP_DATAOBJLIST: 800 case ARGP_TERMLIST: 801 case ARGP_OBJLIST: 802 803 if (ParserState->Aml < ParserState->PkgEnd) 804 { 805 /* Non-empty list of variable arguments, nothing returned */ 806 807 WalkState->ArgCount = ACPI_VAR_ARGS; 808 } 809 break; 810 811 812 default: 813 814 ACPI_ERROR ((AE_INFO, "Invalid ArgType: 0x%X", ArgType)); 815 Status = AE_AML_OPERAND_TYPE; 816 break; 817 } 818 819 *ReturnArg = Arg; 820 return_ACPI_STATUS (Status); 821 } 822