1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _VM_HAT_PTE_H 27 #define _VM_HAT_PTE_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 #ifdef __cplusplus 32 extern "C" { 33 #endif 34 35 #include <sys/types.h> 36 #include <sys/mach_mmu.h> 37 38 /* 39 * macros to get/set/clear the PTE fields 40 */ 41 #define PTE_SET(p, f) ((p) |= (f)) 42 #define PTE_CLR(p, f) ((p) &= ~(x86pte_t)(f)) 43 #define PTE_GET(p, f) ((p) & (f)) 44 45 /* 46 * Handy macro to check if a pagetable entry or pointer is valid 47 */ 48 #define PTE_ISVALID(p) PTE_GET(p, PT_VALID) 49 50 /* 51 * Does a PTE map a large page. 52 */ 53 #define PTE_IS_LGPG(p, l) ((l) > 0 && PTE_GET((p), PT_PAGESIZE)) 54 55 /* 56 * does this PTE represent a page (not a pointer to another page table)? 57 */ 58 #define PTE_ISPAGE(p, l) \ 59 (PTE_ISVALID(p) && ((l) == 0 || PTE_GET(p, PT_PAGESIZE))) 60 61 /* 62 * Handy macro to check if 2 PTE's are the same - ignores REF/MOD bits. 63 * On the 64 bit hypervisor we also have to ignore the high order 64 * software bits and the global/user bit which are set/cleared 65 * capriciously (by the hypervisor!) 66 */ 67 #if defined(__amd64) && defined(__xpv) 68 #define PT_IGNORE ((0x7fful << 52) | PT_GLOBAL | PT_USER) 69 #else 70 #define PT_IGNORE (0) 71 #endif 72 #define PTE_EQUIV(a, b) (((a) | (PT_IGNORE | PT_REF | PT_MOD)) == \ 73 ((b) | (PT_IGNORE | PT_REF | PT_MOD))) 74 75 /* 76 * Shorthand for converting a PTE to it's pfn. 77 */ 78 #define PTE2MFN(p, l) \ 79 mmu_btop(PTE_GET((p), PTE_IS_LGPG((p), (l)) ? PT_PADDR_LGPG : PT_PADDR)) 80 #ifdef __xpv 81 #define PTE2PFN(p, l) pte2pfn(p, l) 82 #else 83 #define PTE2PFN(p, l) PTE2MFN(p, l) 84 #endif 85 86 #define PT_NX (0x8000000000000000ull) 87 #define PT_PADDR (0x000ffffffffff000ull) 88 #define PT_PADDR_LGPG (0x000fffffffffe000ull) /* phys addr for large pages */ 89 90 /* 91 * Macros to create a PTP or PTE from the pfn and level 92 */ 93 #ifdef __xpv 94 95 /* 96 * we use the highest order bit in physical address pfns to mark foreign mfns 97 */ 98 #ifdef _LP64 99 #define PFN_IS_FOREIGN_MFN (1ul << 51) 100 #else 101 #define PFN_IS_FOREIGN_MFN (1ul << 31) 102 #endif 103 104 #define MAKEPTP(pfn, l) \ 105 (pa_to_ma(pfn_to_pa(pfn)) | mmu.ptp_bits[(l) + 1]) 106 #define MAKEPTE(pfn, l) \ 107 ((pfn & PFN_IS_FOREIGN_MFN) ? \ 108 ((pfn_to_pa(pfn & ~PFN_IS_FOREIGN_MFN) | mmu.pte_bits[l]) | \ 109 PT_FOREIGN | PT_REF | PT_MOD) : \ 110 (pa_to_ma(pfn_to_pa(pfn)) | mmu.pte_bits[l])) 111 #else 112 #define MAKEPTP(pfn, l) \ 113 (pfn_to_pa(pfn) | mmu.ptp_bits[(l) + 1]) 114 #define MAKEPTE(pfn, l) \ 115 (pfn_to_pa(pfn) | mmu.pte_bits[l]) 116 #endif 117 118 /* 119 * The idea of "level" refers to the level where the page table is used in the 120 * the hardware address translation steps. The level values correspond to the 121 * following names of tables used in AMD/Intel architecture documents: 122 * 123 * AMD/INTEL name Level # 124 * ---------------------- ------- 125 * Page Map Level 4 3 126 * Page Directory Pointer 2 127 * Page Directory 1 128 * Page Table 0 129 * 130 * The numbering scheme is such that the values of 0 and 1 can correspond to 131 * the pagesize codes used for MPSS support. For now the Maximum level at 132 * which you can have a large page is a constant, that may change in 133 * future processors. 134 * 135 * The type of "level_t" is signed so that it can be used like: 136 * level_t l; 137 * ... 138 * while (--l >= 0) 139 * ... 140 */ 141 #define MAX_NUM_LEVEL 4 142 #define MAX_PAGE_LEVEL 1 /* for now.. sigh */ 143 typedef int8_t level_t; 144 #define LEVEL_SHIFT(l) (mmu.level_shift[l]) 145 #define LEVEL_SIZE(l) (mmu.level_size[l]) 146 #define LEVEL_OFFSET(l) (mmu.level_offset[l]) 147 #define LEVEL_MASK(l) (mmu.level_mask[l]) 148 149 /* 150 * Macros to: 151 * Check for a PFN above 4Gig and 64Gig for 32 bit PAE support 152 */ 153 #define PFN_4G (4ull * (1024 * 1024 * 1024 / MMU_PAGESIZE)) 154 #define PFN_64G (64ull * (1024 * 1024 * 1024 / MMU_PAGESIZE)) 155 #define PFN_ABOVE4G(pfn) ((pfn) >= PFN_4G) 156 #define PFN_ABOVE64G(pfn) ((pfn) >= PFN_64G) 157 158 /* 159 * The CR3 register holds the physical address of the top level page table. 160 */ 161 #define MAKECR3(pfn) mmu_ptob(pfn) 162 163 /* 164 * HAT/MMU parameters that depend on kernel mode and/or processor type 165 */ 166 struct htable; 167 struct hat_mmu_info { 168 x86pte_t pt_nx; /* either 0 or PT_NX */ 169 x86pte_t pt_global; /* either 0 or PT_GLOBAL */ 170 171 pfn_t highest_pfn; 172 173 uint_t num_level; /* number of page table levels in use */ 174 uint_t max_level; /* just num_level - 1 */ 175 uint_t max_page_level; /* maximum level at which we can map a page */ 176 uint_t ptes_per_table; /* # of entries in lower level page tables */ 177 uint_t top_level_count; /* # of entries in top most level page table */ 178 179 uint_t hash_cnt; /* cnt of entries in htable_hash_cache */ 180 uint_t vlp_hash_cnt; /* cnt of entries in vlp htable_hash_cache */ 181 182 uint_t pae_hat; /* either 0 or 1 */ 183 184 uintptr_t hole_start; /* start of VA hole (or -1 if none) */ 185 uintptr_t hole_end; /* end of VA hole (or 0 if none) */ 186 187 struct htable **kmap_htables; /* htables for segmap + 32 bit heap */ 188 x86pte_t *kmap_ptes; /* mapping of pagetables that map kmap */ 189 uintptr_t kmap_addr; /* start addr of kmap */ 190 uintptr_t kmap_eaddr; /* end addr of kmap */ 191 192 uint_t pte_size; /* either 4 or 8 */ 193 uint_t pte_size_shift; /* either 2 or 3 */ 194 x86pte_t ptp_bits[MAX_NUM_LEVEL]; /* bits set for interior PTP */ 195 x86pte_t pte_bits[MAX_NUM_LEVEL]; /* bits set for leaf PTE */ 196 197 /* 198 * A range of VA used to window pages in the i86pc/vm code. 199 * See PWIN_XXX macros. 200 */ 201 caddr_t pwin_base; 202 caddr_t pwin_pte_va; 203 paddr_t pwin_pte_pa; 204 205 /* 206 * The following tables are equivalent to PAGEXXXXX at different levels 207 * in the page table hierarchy. 208 */ 209 uint_t level_shift[MAX_NUM_LEVEL]; /* PAGESHIFT for given level */ 210 uintptr_t level_size[MAX_NUM_LEVEL]; /* PAGESIZE for given level */ 211 uintptr_t level_offset[MAX_NUM_LEVEL]; /* PAGEOFFSET for given level */ 212 uintptr_t level_mask[MAX_NUM_LEVEL]; /* PAGEMASK for given level */ 213 }; 214 215 216 #if defined(_KERNEL) 217 218 /* 219 * Macros to access the HAT's private page windows. They're used for 220 * accessing pagetables, ppcopy() and page_zero(). 221 * The 1st two macros are used to get an index for the particular use. 222 * The next three give you: 223 * - the virtual address of the window 224 * - the virtual address of the pte that maps the window 225 * - the physical address of the pte that map the window 226 */ 227 #define PWIN_TABLE(cpuid) ((cpuid) * 2) 228 #define PWIN_SRC(cpuid) ((cpuid) * 2 + 1) /* for x86pte_copy() */ 229 #define PWIN_VA(x) (mmu.pwin_base + ((x) << MMU_PAGESHIFT)) 230 #define PWIN_PTE_VA(x) (mmu.pwin_pte_va + ((x) << mmu.pte_size_shift)) 231 #define PWIN_PTE_PA(x) (mmu.pwin_pte_pa + ((x) << mmu.pte_size_shift)) 232 233 /* 234 * The concept of a VA hole exists in AMD64. This might need to be made 235 * model specific eventually. 236 * 237 * In the 64 bit kernel PTE loads are atomic, but need cas64 on 32 bit kernel. 238 */ 239 #if defined(__amd64) 240 241 #ifdef lint 242 #define IN_VA_HOLE(va) (__lintzero) 243 #else 244 #define IN_VA_HOLE(va) (mmu.hole_start <= (va) && (va) < mmu.hole_end) 245 #endif 246 247 #define FMT_PTE "0x%lx" 248 #define GET_PTE(ptr) (*(x86pte_t *)(ptr)) 249 #define SET_PTE(ptr, pte) (*(x86pte_t *)(ptr) = pte) 250 #define CAS_PTE(ptr, x, y) cas64(ptr, x, y) 251 252 #elif defined(__i386) 253 254 #define IN_VA_HOLE(va) (__lintzero) 255 256 #define FMT_PTE "0x%llx" 257 258 /* on 32 bit kernels, 64 bit loads aren't atomic, use get_pte64() */ 259 extern x86pte_t get_pte64(x86pte_t *ptr); 260 #define GET_PTE(ptr) (mmu.pae_hat ? get_pte64(ptr) : *(x86pte32_t *)(ptr)) 261 #define SET_PTE(ptr, pte) \ 262 ((mmu.pae_hat ? ((x86pte32_t *)(ptr))[1] = (pte >> 32) : 0), \ 263 *(x86pte32_t *)(ptr) = pte) 264 #define CAS_PTE(ptr, x, y) \ 265 (mmu.pae_hat ? cas64(ptr, x, y) : \ 266 cas32((uint32_t *)(ptr), (uint32_t)(x), (uint32_t)(y))) 267 268 #endif /* __i386 */ 269 270 /* 271 * Return a pointer to the pte entry at the given index within a page table. 272 */ 273 #define PT_INDEX_PTR(p, x) \ 274 ((x86pte_t *)((uintptr_t)(p) + ((x) << mmu.pte_size_shift))) 275 276 /* 277 * Return the physical address of the pte entry at the given index within a 278 * page table. 279 */ 280 #define PT_INDEX_PHYSADDR(p, x) \ 281 ((paddr_t)(p) + ((x) << mmu.pte_size_shift)) 282 283 /* 284 * From pfn to bytes, careful not to lose bits on PAE. 285 */ 286 #define pfn_to_pa(pfn) (mmu_ptob((paddr_t)(pfn))) 287 288 #ifdef __xpv 289 extern pfn_t pte2pfn(x86pte_t, level_t); 290 #endif 291 292 extern struct hat_mmu_info mmu; 293 294 #endif /* _KERNEL */ 295 296 297 #ifdef __cplusplus 298 } 299 #endif 300 301 #endif /* _VM_HAT_PTE_H */ 302