xref: /titanic_44/usr/src/uts/i86pc/os/pci_mech1_amd.c (revision db8b037b5616a366b7dfdc01ef9552f02f9adfdd)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2010 Advanced Micro Devices, Inc.
23  * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
24  */
25 
26 /*
27  * PCI Mechanism 1 low-level routines with ECS support for AMD family >= 0x10
28  */
29 
30 #include <sys/controlregs.h>
31 #include <sys/cpuvar.h>
32 #include <sys/types.h>
33 #include <sys/pci.h>
34 #include <sys/pci_impl.h>
35 #include <sys/sunddi.h>
36 #include <sys/pci_cfgspace_impl.h>
37 #include <sys/x86_archext.h>
38 
39 boolean_t
40 pci_check_amd_ioecs(void)
41 {
42 	struct cpuid_regs cp;
43 	int family;
44 
45 	if (!is_x86_feature(x86_featureset, X86FSET_CPUID))
46 		return (B_FALSE);
47 
48 	/*
49 	 * Get the CPU vendor string from CPUID.
50 	 * This PCI mechanism only applies to AMD CPUs.
51 	 */
52 	cp.cp_eax = 0;
53 	(void) __cpuid_insn(&cp);
54 
55 	if ((cp.cp_ebx != 0x68747541) || /* Auth */
56 	    (cp.cp_edx != 0x69746e65) || /* enti */
57 	    (cp.cp_ecx != 0x444d4163))   /* cAMD */
58 		return (B_FALSE);
59 
60 	/*
61 	 * Get the CPU family from CPUID.
62 	 * This PCI mechanism is only available on family 0x10 or higher.
63 	 */
64 	cp.cp_eax = 1;
65 	(void) __cpuid_insn(&cp);
66 	family = ((cp.cp_eax >> 8) & 0xf) + ((cp.cp_eax >> 20) & 0xff);
67 
68 	if (family < 0x10)
69 		return (B_FALSE);
70 
71 	/*
72 	 * Set the EnableCf8ExtCfg bit in the Northbridge Configuration Register
73 	 * to enable accessing PCI ECS using in/out instructions.
74 	 */
75 	wrmsr(MSR_AMD_NB_CFG, rdmsr(MSR_AMD_NB_CFG) | AMD_GH_NB_CFG_EN_ECS);
76 	return (B_TRUE);
77 }
78 
79 /*
80  * Macro to setup PCI Extended Configuration Space (ECS) address to give to
81  * "in/out" instructions
82  */
83 #define	PCI_CADDR1_ECS(b, d, f, r) \
84 	(PCI_CADDR1((b), (d), (f), (r)) | ((((r) >> 8) & 0xf) << 24))
85 
86 /*
87  * Per PCI 2.1 section 3.7.4.1 and PCI-PCI Bridge Architecture 1.0 section
88  * 5.3.1.2:  dev=31 func=7 reg=0 means a special cycle.  We don't want to
89  * trigger that by accident, so we pretend that dev 31, func 7 doesn't
90  * exist.  If we ever want special cycle support, we'll add explicit
91  * special cycle support.
92  */
93 
94 uint8_t
95 pci_mech1_amd_getb(int bus, int device, int function, int reg)
96 {
97 	uint8_t val;
98 
99 	if (device == PCI_MECH1_SPEC_CYCLE_DEV &&
100 	    function == PCI_MECH1_SPEC_CYCLE_FUNC) {
101 		return (0xff);
102 	}
103 
104 	mutex_enter(&pcicfg_mutex);
105 	outl(PCI_CONFADD, PCI_CADDR1_ECS(bus, device, function, reg));
106 	val = inb(PCI_CONFDATA | (reg & 0x3));
107 	mutex_exit(&pcicfg_mutex);
108 	return (val);
109 }
110 
111 uint16_t
112 pci_mech1_amd_getw(int bus, int device, int function, int reg)
113 {
114 	uint16_t val;
115 
116 	if (device == PCI_MECH1_SPEC_CYCLE_DEV &&
117 	    function == PCI_MECH1_SPEC_CYCLE_FUNC) {
118 		return (0xffff);
119 	}
120 
121 	mutex_enter(&pcicfg_mutex);
122 	outl(PCI_CONFADD, PCI_CADDR1_ECS(bus, device, function, reg));
123 	val =  inw(PCI_CONFDATA | (reg & 0x2));
124 	mutex_exit(&pcicfg_mutex);
125 	return (val);
126 }
127 
128 uint32_t
129 pci_mech1_amd_getl(int bus, int device, int function, int reg)
130 {
131 	uint32_t val;
132 
133 	if (device == PCI_MECH1_SPEC_CYCLE_DEV &&
134 	    function == PCI_MECH1_SPEC_CYCLE_FUNC) {
135 		return (0xffffffffu);
136 	}
137 
138 	mutex_enter(&pcicfg_mutex);
139 	outl(PCI_CONFADD, PCI_CADDR1_ECS(bus, device, function, reg));
140 	val = inl(PCI_CONFDATA);
141 	mutex_exit(&pcicfg_mutex);
142 	return (val);
143 }
144 
145 void
146 pci_mech1_amd_putb(int bus, int device, int function, int reg, uint8_t val)
147 {
148 	if (device == PCI_MECH1_SPEC_CYCLE_DEV &&
149 	    function == PCI_MECH1_SPEC_CYCLE_FUNC) {
150 		return;
151 	}
152 
153 	mutex_enter(&pcicfg_mutex);
154 	outl(PCI_CONFADD, PCI_CADDR1_ECS(bus, device, function, reg));
155 	outb(PCI_CONFDATA | (reg & 0x3), val);
156 	mutex_exit(&pcicfg_mutex);
157 }
158 
159 void
160 pci_mech1_amd_putw(int bus, int device, int function, int reg, uint16_t val)
161 {
162 	if (device == PCI_MECH1_SPEC_CYCLE_DEV &&
163 	    function == PCI_MECH1_SPEC_CYCLE_FUNC) {
164 		return;
165 	}
166 
167 	mutex_enter(&pcicfg_mutex);
168 	outl(PCI_CONFADD, PCI_CADDR1_ECS(bus, device, function, reg));
169 	outw(PCI_CONFDATA | (reg & 0x2), val);
170 	mutex_exit(&pcicfg_mutex);
171 }
172 
173 void
174 pci_mech1_amd_putl(int bus, int device, int function, int reg, uint32_t val)
175 {
176 	if (device == PCI_MECH1_SPEC_CYCLE_DEV &&
177 	    function == PCI_MECH1_SPEC_CYCLE_FUNC) {
178 		return;
179 	}
180 
181 	mutex_enter(&pcicfg_mutex);
182 	outl(PCI_CONFADD, PCI_CADDR1_ECS(bus, device, function, reg));
183 	outl(PCI_CONFDATA, val);
184 	mutex_exit(&pcicfg_mutex);
185 }
186