xref: /titanic_44/usr/src/uts/i86pc/os/mlsetup.c (revision 131b6157d93e4c028591b24c5acb1f4b2ebd2947)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include <sys/types.h>
29 #include <sys/disp.h>
30 #include <sys/promif.h>
31 #include <sys/clock.h>
32 #include <sys/cpuvar.h>
33 #include <sys/stack.h>
34 #include <vm/as.h>
35 #include <vm/hat.h>
36 #include <sys/reboot.h>
37 #include <sys/avintr.h>
38 #include <sys/vtrace.h>
39 #include <sys/proc.h>
40 #include <sys/thread.h>
41 #include <sys/cpupart.h>
42 #include <sys/pset.h>
43 #include <sys/copyops.h>
44 #include <sys/chip.h>
45 #include <sys/disp.h>
46 #include <sys/debug.h>
47 #include <sys/sunddi.h>
48 #include <sys/x86_archext.h>
49 #include <sys/privregs.h>
50 #include <sys/machsystm.h>
51 #include <sys/ontrap.h>
52 #include <sys/bootconf.h>
53 #include <sys/kdi.h>
54 #include <sys/archsystm.h>
55 #include <sys/promif.h>
56 #include <sys/bootconf.h>
57 #include <sys/kobj.h>
58 #include <sys/kobj_lex.h>
59 #include <sys/pci_cfgspace.h>
60 #if defined(__amd64)
61 #include <sys/bootsvcs.h>
62 
63 /*
64  * XX64	This stuff deals with switching stacks in case a trapping
65  *	thread wants to call back into boot -after- boot has lost track
66  *	of the mappings but before the kernel owns the console.
67  *
68  *	(A better way to hide this would be to add a 'this' pointer to
69  *	every boot syscall so that vmx could get at the resulting save
70  *	area.)
71  */
72 
73 struct boot_syscalls *_vmx_sysp;
74 static struct boot_syscalls __kbootsvcs;
75 extern struct boot_syscalls *sysp;
76 extern void _stack_safe_putchar(int c);
77 #endif
78 
79 /*
80  * some globals for patching the result of cpuid
81  * to solve problems w/ creative cpu vendors
82  */
83 
84 extern uint32_t cpuid_feature_ecx_include;
85 extern uint32_t cpuid_feature_ecx_exclude;
86 extern uint32_t cpuid_feature_edx_include;
87 extern uint32_t cpuid_feature_edx_exclude;
88 
89 /*
90  * Dummy spl priority masks
91  */
92 static unsigned char	dummy_cpu_pri[MAXIPL + 1] = {
93 	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
94 	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf
95 };
96 
97 /*
98  * External Routines:
99  */
100 
101 extern void init_tables(void);
102 
103 
104 static uint32_t
105 bootprop_getval(char *name)
106 {
107 	char prop[32];
108 	u_longlong_t ll;
109 	extern struct bootops *bootops;
110 	if ((BOP_GETPROPLEN(bootops, name) > sizeof (prop)) ||
111 	    (BOP_GETPROP(bootops, name, prop) < 0) ||
112 	    (kobj_getvalue(prop, &ll) == -1))
113 		return (0);
114 	return ((uint32_t)ll);
115 }
116 
117 /*
118  * Setup routine called right before main(). Interposing this function
119  * before main() allows us to call it in a machine-independent fashion.
120  */
121 void
122 mlsetup(struct regs *rp)
123 {
124 	extern struct classfuncs sys_classfuncs;
125 	extern struct chip cpu0_chip;
126 	extern disp_t cpu0_disp;
127 	extern char t0stack[];
128 	int boot_ncpus;
129 
130 	ASSERT_STACK_ALIGNED();
131 
132 #if defined(__amd64)
133 
134 #if (BS_VERSION > 4)
135 	/*
136 	 * When new boot_syscalls are added to the vector, this routine
137 	 * must be modified to copy them into the kernel's copy of the
138 	 * vector.
139 	 */
140 #error mlsetup() must be updated for amd64 to support new boot_syscalls
141 #endif	/* (BS_VERSION > 4) */
142 
143 	/*
144 	 * XX64	This remaps vmx's putchar to use the kernel's version
145 	 *	that switches stacks before diving into vmx
146 	 *	See explanation/complaints in commentary above.
147 	 */
148 	_vmx_sysp = sysp;
149 	sysp = &__kbootsvcs;
150 
151 	sysp->bsvc_getchar = _vmx_sysp->bsvc_getchar;
152 	sysp->bsvc_putchar = _stack_safe_putchar;
153 	sysp->bsvc_ischar = _vmx_sysp->bsvc_ischar;
154 #endif
155 	/*
156 	 * initialize cpu_self
157 	 */
158 	cpu[0]->cpu_self = cpu[0];
159 
160 	/*
161 	 * Set up dummy cpu_pri_data values till psm spl code is
162 	 * installed.  This allows splx() to work on amd64.
163 	 */
164 
165 	cpu[0]->cpu_pri_data = dummy_cpu_pri;
166 
167 	/*
168 	 * check if we've got special bits to clear or set
169 	 * when checking cpu features
170 	 */
171 
172 	cpuid_feature_ecx_include =
173 	    bootprop_getval("cpuid_feature_ecx_include");
174 	cpuid_feature_ecx_exclude =
175 	    bootprop_getval("cpuid_feature_ecx_exclude");
176 	cpuid_feature_edx_include =
177 	    bootprop_getval("cpuid_feature_edx_include");
178 	cpuid_feature_edx_exclude =
179 	    bootprop_getval("cpuid_feature_edx_exclude");
180 
181 	/*
182 	 * The first lightweight pass (pass0) through the cpuid data
183 	 * was done in locore before mlsetup was called.  Do the next
184 	 * pass in C code.
185 	 *
186 	 * The x86_feature bits are set here on the basis of the capabilities
187 	 * of the boot CPU.  Note that if we choose to support CPUs that have
188 	 * different feature sets (at which point we would almost certainly
189 	 * want to set the feature bits to correspond to the feature
190 	 * minimum) this value may be altered.
191 	 */
192 
193 	x86_feature = cpuid_pass1(cpu[0]);
194 
195 	/*
196 	 * Initialize idt0, gdt0, ldt0_default, ktss0 and dftss.
197 	 */
198 	init_tables();
199 
200 #if defined(__amd64)
201 	/*CSTYLED*/
202 	{
203 		/*
204 		 * setup %gs for the kernel
205 		 */
206 		wrmsr(MSR_AMD_GSBASE, (uint64_t)&cpus[0]);
207 		/*
208 		 * XX64 We should never dereference off "other gsbase" or
209 		 * "fsbase".  So, we should arrange to point FSBASE and
210 		 * KGSBASE somewhere truly awful e.g. point it at the last
211 		 * valid address below the hole so that any attempts to index
212 		 * off them cause an exception.
213 		 *
214 		 * For now, point it at 8G -- at least it should be unmapped
215 		 * until some 64-bit processes run.
216 		 */
217 		wrmsr(MSR_AMD_FSBASE, 0x200000000UL);
218 		wrmsr(MSR_AMD_KGSBASE, 0x200000000UL);
219 	}
220 
221 #elif defined(__i386)
222 	/*
223 	 * enable large page support right here.
224 	 */
225 	if (x86_feature & X86_LARGEPAGE) {
226 		cr4_value |= CR4_PSE;
227 		if (x86_feature & X86_PGE)
228 			cr4_value |= CR4_PGE;
229 		setup_121_andcall(enable_big_page_support, cr4_value);
230 	}
231 
232 	/*
233 	 * Some i386 processors do not implement the rdtsc instruction,
234 	 * or at least they do not implement it correctly.
235 	 *
236 	 * For those that do, patch in the rdtsc instructions in
237 	 * various parts of the kernel right now while the text is
238 	 * still writable.
239 	 */
240 	if (x86_feature & X86_TSC)
241 		patch_tsc();
242 #endif
243 
244 	/*
245 	 * initialize t0
246 	 */
247 	t0.t_stk = (caddr_t)rp - MINFRAME;
248 	t0.t_stkbase = t0stack;
249 	t0.t_pri = maxclsyspri - 3;
250 	t0.t_schedflag = TS_LOAD | TS_DONT_SWAP;
251 	t0.t_procp = &p0;
252 	t0.t_plockp = &p0lock.pl_lock;
253 	t0.t_lwp = &lwp0;
254 	t0.t_forw = &t0;
255 	t0.t_back = &t0;
256 	t0.t_next = &t0;
257 	t0.t_prev = &t0;
258 	t0.t_cpu = cpu[0];
259 	t0.t_disp_queue = &cpu0_disp;
260 	t0.t_bind_cpu = PBIND_NONE;
261 	t0.t_bind_pset = PS_NONE;
262 	t0.t_cpupart = &cp_default;
263 	t0.t_clfuncs = &sys_classfuncs.thread;
264 	t0.t_copyops = NULL;
265 	THREAD_ONPROC(&t0, CPU);
266 
267 	lwp0.lwp_thread = &t0;
268 	lwp0.lwp_regs = (void *) rp;
269 	lwp0.lwp_procp = &p0;
270 	t0.t_tid = p0.p_lwpcnt = p0.p_lwprcnt = p0.p_lwpid = 1;
271 
272 	p0.p_exec = NULL;
273 	p0.p_stat = SRUN;
274 	p0.p_flag = SSYS;
275 	p0.p_tlist = &t0;
276 	p0.p_stksize = 2*PAGESIZE;
277 	p0.p_stkpageszc = 0;
278 	p0.p_as = &kas;
279 	p0.p_lockp = &p0lock;
280 	p0.p_brkpageszc = 0;
281 	sigorset(&p0.p_ignore, &ignoredefault);
282 
283 	CPU->cpu_thread = &t0;
284 	bzero(&cpu0_disp, sizeof (disp_t));
285 	CPU->cpu_disp = &cpu0_disp;
286 	CPU->cpu_disp->disp_cpu = CPU;
287 	CPU->cpu_dispthread = &t0;
288 	CPU->cpu_idle_thread = &t0;
289 	CPU->cpu_flags = CPU_READY | CPU_RUNNING | CPU_EXISTS | CPU_ENABLE;
290 	CPU->cpu_dispatch_pri = t0.t_pri;
291 
292 	CPU->cpu_id = 0;
293 
294 	CPU->cpu_tss = &ktss0;
295 
296 	CPU->cpu_pri = 12;		/* initial PIL for the boot CPU */
297 
298 	CPU->cpu_gdt = gdt0;
299 
300 	/*
301 	 * The kernel doesn't use LDTs unless a process explicitly requests one.
302 	 */
303 	p0.p_ldt_desc = zero_sdesc;
304 
305 	/*
306 	 * Kernel IDT.
307 	 */
308 	CPU->cpu_idt = idt0;
309 
310 	/*
311 	 * Initialize thread/cpu microstate accounting here
312 	 */
313 	init_mstate(&t0, LMS_SYSTEM);
314 	init_cpu_mstate(CPU, CMS_SYSTEM);
315 
316 	/*
317 	 * Initialize lists of available and active CPUs.
318 	 */
319 	cpu_list_init(CPU);
320 
321 	cpu_vm_data_init(CPU);
322 
323 	/* lgrp_init() needs PCI config space access */
324 	pci_cfgspace_init();
325 
326 	/*
327 	 * Initialize the lgrp framework
328 	 */
329 	lgrp_init();
330 
331 	/*
332 	 * The lgroup code needs to at least know about a CPU's
333 	 * chip association, but it's too early to fully initialize
334 	 * cpu0_chip, since the device node for the boot CPU doesn't
335 	 * exist yet. Initialize enough of it to get by until formal
336 	 * initialization.
337 	 */
338 	CPU->cpu_rechoose = rechoose_interval;
339 	CPU->cpu_chip = &cpu0_chip;
340 
341 	rp->r_fp = 0;	/* terminate kernel stack traces! */
342 
343 	prom_init("kernel", (void *)NULL);
344 
345 	boot_ncpus = bootprop_getval("boot-ncpus");
346 
347 	/*
348 	 * To avoid wasting kernel memory, we're temporarily limiting the
349 	 * total number of processors to 32 by default until we get the
350 	 * capability to scan ACPI tables early on boot to detect how many
351 	 * processors are actually present.  However, 64-bit systems
352 	 * can be booted with up to 64 processors by setting "boot-ncpus"
353 	 * boot property to 64.
354 	 */
355 	if (boot_ncpus <= 0 || boot_ncpus > NCPU)
356 		boot_ncpus = 32;
357 
358 	max_ncpus = boot_max_ncpus = boot_ncpus;
359 
360 	if (boothowto & RB_HALT) {
361 		prom_printf("unix: kernel halted by -h flag\n");
362 		prom_enter_mon();
363 	}
364 
365 	ASSERT_STACK_ALIGNED();
366 
367 	if (workaround_errata(CPU) != 0)
368 		panic("critical workaround(s) missing for boot cpu");
369 }
370