xref: /titanic_44/usr/src/uts/i86pc/os/cpupm/pwrnow.c (revision 1e4c938b57d1656808e4112127ff1dce3eba5314)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 
25 #include <sys/x86_archext.h>
26 #include <sys/machsystm.h>
27 #include <sys/x_call.h>
28 #include <sys/acpi/acpi.h>
29 #include <sys/acpica.h>
30 #include <sys/pwrnow.h>
31 #include <sys/cpu_acpi.h>
32 #include <sys/cpupm.h>
33 #include <sys/dtrace.h>
34 #include <sys/sdt.h>
35 
36 static int pwrnow_init(cpu_t *);
37 static void pwrnow_fini(cpu_t *);
38 static void pwrnow_power(cpuset_t, uint32_t);
39 static void pwrnow_stop(cpu_t *);
40 
41 /*
42  * Interfaces for modules implementing AMD's PowerNow!.
43  */
44 cpupm_state_ops_t pwrnow_ops = {
45 	"PowerNow! Technology",
46 	pwrnow_init,
47 	pwrnow_fini,
48 	pwrnow_power,
49 	pwrnow_stop
50 };
51 
52 /*
53  * Error returns
54  */
55 #define	PWRNOW_RET_SUCCESS		0x00
56 #define	PWRNOW_RET_NO_PM		0x01
57 #define	PWRNOW_RET_UNSUP_STATE		0x02
58 #define	PWRNOW_RET_TRANS_INCOMPLETE	0x03
59 
60 #define	PWRNOW_LATENCY_WAIT		10
61 
62 /*
63  * MSR registers for changing and reading processor power state.
64  */
65 #define	PWRNOW_PERF_CTL_MSR		0xC0010062
66 #define	PWRNOW_PERF_STATUS_MSR		0xC0010063
67 
68 #define	AMD_CPUID_PSTATE_HARDWARE	(1<<7)
69 #define	AMD_CPUID_TSC_CONSTANT		(1<<8)
70 
71 /*
72  * Debugging support
73  */
74 #ifdef	DEBUG
75 volatile int pwrnow_debug = 0;
76 #define	PWRNOW_DEBUG(arglist) if (pwrnow_debug) printf arglist;
77 #else
78 #define	PWRNOW_DEBUG(arglist)
79 #endif
80 
81 /*
82  * Write the ctrl register.
83  */
84 static void
85 write_ctrl(cpu_acpi_handle_t handle, uint32_t ctrl)
86 {
87 	cpu_acpi_pct_t *pct_ctrl;
88 	uint64_t reg;
89 
90 	pct_ctrl = CPU_ACPI_PCT_CTRL(handle);
91 
92 	switch (pct_ctrl->cr_addrspace_id) {
93 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
94 		reg = ctrl;
95 		wrmsr(PWRNOW_PERF_CTL_MSR, reg);
96 		break;
97 
98 	default:
99 		DTRACE_PROBE1(pwrnow_ctrl_unsupported_type, uint8_t,
100 		    pct_ctrl->cr_addrspace_id);
101 		return;
102 	}
103 
104 	DTRACE_PROBE1(pwrnow_ctrl_write, uint32_t, ctrl);
105 }
106 
107 /*
108  * Transition the current processor to the requested state.
109  */
110 static void
111 pwrnow_pstate_transition(uint32_t req_state)
112 {
113 	cpupm_mach_state_t *mach_state =
114 	    (cpupm_mach_state_t *)CPU->cpu_m.mcpu_pm_mach_state;
115 	cpu_acpi_handle_t handle = mach_state->ms_acpi_handle;
116 	cpu_acpi_pstate_t *req_pstate;
117 	uint32_t ctrl;
118 
119 	req_pstate = (cpu_acpi_pstate_t *)CPU_ACPI_PSTATES(handle);
120 	req_pstate += req_state;
121 
122 	DTRACE_PROBE1(pwrnow_transition_freq, uint32_t,
123 	    CPU_ACPI_FREQ(req_pstate));
124 
125 	/*
126 	 * Initiate the processor p-state change.
127 	 */
128 	ctrl = CPU_ACPI_PSTATE_CTRL(req_pstate);
129 	write_ctrl(handle, ctrl);
130 
131 	mach_state->ms_pstate.cma_state.pstate = req_state;
132 	cpu_set_curr_clock((uint64_t)CPU_ACPI_FREQ(req_pstate) * 1000000);
133 }
134 
135 static void
136 pwrnow_power(cpuset_t set, uint32_t req_state)
137 {
138 	/*
139 	 * If thread is already running on target CPU then just
140 	 * make the transition request. Otherwise, we'll need to
141 	 * make a cross-call.
142 	 */
143 	kpreempt_disable();
144 	if (CPU_IN_SET(set, CPU->cpu_id)) {
145 		pwrnow_pstate_transition(req_state);
146 		CPUSET_DEL(set, CPU->cpu_id);
147 	}
148 	if (!CPUSET_ISNULL(set)) {
149 		xc_call((xc_arg_t)req_state, NULL, NULL,
150 		    CPUSET2BV(set), (xc_func_t)pwrnow_pstate_transition);
151 	}
152 	kpreempt_enable();
153 }
154 
155 /*
156  * Validate that this processor supports PowerNow! and if so,
157  * get the P-state data from ACPI and cache it.
158  */
159 static int
160 pwrnow_init(cpu_t *cp)
161 {
162 	cpupm_mach_state_t *mach_state =
163 	    (cpupm_mach_state_t *)cp->cpu_m.mcpu_pm_mach_state;
164 	cpu_acpi_handle_t handle = mach_state->ms_acpi_handle;
165 	cpu_acpi_pct_t *pct_stat;
166 
167 	PWRNOW_DEBUG(("pwrnow_init: processor %d\n", cp->cpu_id));
168 
169 	/*
170 	 * Cache the P-state specific ACPI data.
171 	 */
172 	if (cpu_acpi_cache_pstate_data(handle) != 0) {
173 		cmn_err(CE_NOTE, "!PowerNow! support is being "
174 		    "disabled due to errors parsing ACPI P-state objects "
175 		    "exported by BIOS.");
176 		pwrnow_fini(cp);
177 		return (PWRNOW_RET_NO_PM);
178 	}
179 
180 	pct_stat = CPU_ACPI_PCT_STATUS(handle);
181 	switch (pct_stat->cr_addrspace_id) {
182 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
183 		PWRNOW_DEBUG(("Transitions will use fixed hardware\n"));
184 		break;
185 	default:
186 		cmn_err(CE_WARN, "!_PCT configured for unsupported "
187 		    "addrspace = %d.", pct_stat->cr_addrspace_id);
188 		cmn_err(CE_NOTE, "!CPU power management will not function.");
189 		pwrnow_fini(cp);
190 		return (PWRNOW_RET_NO_PM);
191 	}
192 
193 	cpupm_alloc_domains(cp, CPUPM_P_STATES);
194 
195 	PWRNOW_DEBUG(("Processor %d succeeded.\n", cp->cpu_id))
196 	return (PWRNOW_RET_SUCCESS);
197 }
198 
199 /*
200  * Free resources allocated by pwrnow_init().
201  */
202 static void
203 pwrnow_fini(cpu_t *cp)
204 {
205 	cpupm_mach_state_t *mach_state =
206 	    (cpupm_mach_state_t *)(cp->cpu_m.mcpu_pm_mach_state);
207 	cpu_acpi_handle_t handle = mach_state->ms_acpi_handle;
208 
209 	cpupm_free_domains(&cpupm_pstate_domains);
210 	cpu_acpi_free_pstate_data(handle);
211 }
212 
213 boolean_t
214 pwrnow_supported()
215 {
216 	struct cpuid_regs cpu_regs;
217 
218 	/* Required features */
219 	if (!is_x86_feature(x86_featureset, X86FSET_CPUID) ||
220 	    !is_x86_feature(x86_featureset, X86FSET_MSR)) {
221 		PWRNOW_DEBUG(("No CPUID or MSR support."));
222 		return (B_FALSE);
223 	}
224 
225 	/*
226 	 * Get the Advanced Power Management Information.
227 	 */
228 	cpu_regs.cp_eax = 0x80000007;
229 	(void) __cpuid_insn(&cpu_regs);
230 
231 	/*
232 	 * We currently only support CPU power management of
233 	 * processors that are P-state TSC invariant
234 	 */
235 	if (!(cpu_regs.cp_edx & AMD_CPUID_TSC_CONSTANT)) {
236 		PWRNOW_DEBUG(("No support for CPUs that are not P-state "
237 		    "TSC invariant.\n"));
238 		return (B_FALSE);
239 	}
240 
241 	/*
242 	 * We only support the "Fire and Forget" style of PowerNow! (i.e.,
243 	 * single MSR write to change speed).
244 	 */
245 	if (!(cpu_regs.cp_edx & AMD_CPUID_PSTATE_HARDWARE)) {
246 		PWRNOW_DEBUG(("Hardware P-State control is not supported.\n"));
247 		return (B_FALSE);
248 	}
249 	return (B_TRUE);
250 }
251 
252 static void
253 pwrnow_stop(cpu_t *cp)
254 {
255 	cpupm_mach_state_t *mach_state =
256 	    (cpupm_mach_state_t *)(cp->cpu_m.mcpu_pm_mach_state);
257 	cpu_acpi_handle_t handle = mach_state->ms_acpi_handle;
258 
259 	cpupm_remove_domains(cp, CPUPM_P_STATES, &cpupm_pstate_domains);
260 	cpu_acpi_free_pstate_data(handle);
261 }
262