xref: /titanic_44/usr/src/uts/i86pc/io/psm/uppc.c (revision 56b2bdd1f04d465cfe4a95b88ae5cba5884154e4)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #define	PSMI_1_7
27 
28 #include <sys/mutex.h>
29 #include <sys/types.h>
30 #include <sys/time.h>
31 #include <sys/machlock.h>
32 #include <sys/smp_impldefs.h>
33 #include <sys/uadmin.h>
34 #include <sys/promif.h>
35 #include <sys/psm.h>
36 #include <sys/pit.h>
37 #include <sys/apic.h>
38 #include <sys/psm_common.h>
39 #include <sys/atomic.h>
40 #include <sys/archsystm.h>
41 
42 #define	NSEC_IN_SEC		1000000000
43 
44 /*
45  * Local Function Prototypes
46  */
47 static void uppc_softinit(void);
48 static void uppc_picinit();
49 static int uppc_post_cpu_start(void);
50 static int uppc_clkinit(int);
51 static int uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl);
52 static int uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl);
53 static processorid_t uppc_get_next_processorid(processorid_t cpu_id);
54 static int uppc_get_clockirq(int ipl);
55 static int uppc_probe(void);
56 static int uppc_translate_irq(dev_info_t *dip, int irqno);
57 static void uppc_shutdown(int cmd, int fcn);
58 static void uppc_preshutdown(int cmd, int fcn);
59 static int uppc_state(psm_state_request_t *request);
60 static int uppc_init_acpi(void);
61 static void uppc_setspl(int);
62 static int uppc_intr_enter(int, int *);
63 static void uppc_intr_exit(int, int);
64 static hrtime_t uppc_gethrtime();
65 
66 static int uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
67     int *pci_irqp, iflag_t *intr_flagp);
68 
69 /*
70  * Global Data
71  */
72 static struct standard_pic pics0;
73 int uppc_use_acpi = 1;	/* Use ACPI by default */
74 int uppc_enable_acpi = 0;
75 
76 
77 /*
78  * For interrupt link devices, if uppc_unconditional_srs is set, an irq resource
79  * will be assigned (via _SRS). If it is not set, use the current
80  * irq setting (via _CRS), but only if that irq is in the set of possible
81  * irqs (returned by _PRS) for the device.
82  */
83 int uppc_unconditional_srs = 1;
84 
85 /*
86  * For interrupt link devices, if uppc_prefer_crs is set when we are
87  * assigning an IRQ resource to a device, prefer the current IRQ setting
88  * over other possible irq settings under same conditions.
89  */
90 int uppc_prefer_crs = 1;
91 
92 int uppc_verbose = 0;
93 
94 /* flag definitions for uppc_verbose */
95 #define	UPPC_VERBOSE_IRQ_FLAG			0x00000001
96 #define	UPPC_VERBOSE_POWEROFF_FLAG		0x00000002
97 #define	UPPC_VERBOSE_POWEROFF_PAUSE_FLAG	0x00000004
98 
99 
100 #define	UPPC_VERBOSE_IRQ(fmt) \
101 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG) \
102 		cmn_err fmt;
103 
104 #define	UPPC_VERBOSE_POWEROFF(fmt) \
105 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG) \
106 		prom_printf fmt;
107 
108 uchar_t uppc_reserved_irqlist[MAX_ISA_IRQ + 1];
109 
110 static uint16_t uppc_irq_shared_table[MAX_ISA_IRQ + 1];
111 
112 /*
113  * Contains SCI irqno from FADT after initialization
114  */
115 static int uppc_sci = -1;
116 
117 /*
118  * Local Static Data
119  */
120 
121 static lock_t uppc_gethrtime_lock;
122 static hrtime_t uppc_lasthrtime;
123 
124 
125 #ifdef UPPC_DEBUG
126 #define	DENT	0x0001
127 
128 static int	uppc_debug = 0;
129 
130 
131 #endif
132 
133 
134 static struct	psm_ops uppc_ops = {
135 	uppc_probe,				/* psm_probe		*/
136 
137 	uppc_softinit,				/* psm_init		*/
138 	uppc_picinit,				/* psm_picinit		*/
139 	uppc_intr_enter,			/* psm_intr_enter	*/
140 	uppc_intr_exit,				/* psm_intr_exit	*/
141 	uppc_setspl,				/* psm_setspl		*/
142 	uppc_addspl,				/* psm_addspl		*/
143 	uppc_delspl,				/* psm_delspl		*/
144 	(int (*)(processorid_t))NULL,		/* psm_disable_intr	*/
145 	(void (*)(processorid_t))NULL,		/* psm_enable_intr	*/
146 	(int (*)(int))NULL,			/* psm_softlvl_to_irq	*/
147 	(void (*)(int))NULL,			/* psm_set_softintr	*/
148 	(void (*)(processorid_t))NULL,		/* psm_set_idlecpu	*/
149 	(void (*)(processorid_t))NULL,		/* psm_unset_idlecpu	*/
150 
151 	uppc_clkinit,				/* psm_clkinit		*/
152 	uppc_get_clockirq,			/* psm_get_clockirq	*/
153 	(void (*)(void))NULL,			/* psm_hrtimeinit	*/
154 	uppc_gethrtime,				/* psm_gethrtime	*/
155 
156 	uppc_get_next_processorid,		/* psm_get_next_processorid */
157 	(int (*)(processorid_t, caddr_t))NULL,	/* psm_cpu_start	*/
158 	uppc_post_cpu_start,			/* psm_post_cpu_start	*/
159 	uppc_shutdown,				/* psm_shutdown		*/
160 	(int (*)(int, int))NULL,		/* psm_get_ipivect	*/
161 	(void (*)(processorid_t, int))NULL,	/* psm_send_ipi		*/
162 
163 	uppc_translate_irq,			/* psm_translate_irq	*/
164 
165 	(void (*)(int, char *))NULL,		/* psm_notify_error	*/
166 	(void (*)(int msg))NULL,		/* psm_notify_func	*/
167 	(void (*)(hrtime_t time))NULL,		/* psm_timer_reprogram	*/
168 	(void (*)(void))NULL,			/* psm_timer_enable	*/
169 	(void (*)(void))NULL,			/* psm_timer_disable	*/
170 	(void (*)(void *arg))NULL,		/* psm_post_cyclic_setup */
171 	uppc_preshutdown,			/* psm_preshutdown	*/
172 
173 	(int (*)(dev_info_t *, ddi_intr_handle_impl_t *,
174 	    psm_intr_op_t, int *))NULL,		/* psm_intr_ops		*/
175 
176 	uppc_state,				/* psm_state		*/
177 	(int (*)(psm_cpu_request_t *))NULL	/* psm_cpu_ops		*/
178 };
179 
180 
181 static struct	psm_info uppc_info = {
182 	PSM_INFO_VER01_7,	/* version				*/
183 	PSM_OWN_SYS_DEFAULT,	/* ownership				*/
184 	(struct psm_ops *)&uppc_ops, /* operation			*/
185 	"uppc",			/* machine name				*/
186 	"UniProcessor PC",	/* machine descriptions			*/
187 };
188 
189 /*
190  * Configuration Data
191  */
192 
193 /*
194  * This is the loadable module wrapper.
195  */
196 #include <sys/modctl.h>
197 
198 static void *uppc_hdlp;
199 
200 int
201 _init(void)
202 {
203 	return (psm_mod_init(&uppc_hdlp, &uppc_info));
204 }
205 
206 int
207 _fini(void)
208 {
209 	return (psm_mod_fini(&uppc_hdlp, &uppc_info));
210 }
211 
212 int
213 _info(struct modinfo *modinfop)
214 {
215 	return (psm_mod_info(&uppc_hdlp, &uppc_info, modinfop));
216 }
217 
218 /*
219  * Autoconfiguration Routines
220  */
221 
222 static int
223 uppc_probe(void)
224 {
225 
226 
227 	return (PSM_SUCCESS);
228 }
229 
230 static void
231 uppc_softinit(void)
232 {
233 	struct standard_pic *pp;
234 	int i;
235 
236 	pp = &pics0;
237 
238 
239 	if (uppc_use_acpi && uppc_init_acpi()) {
240 		build_reserved_irqlist((uchar_t *)uppc_reserved_irqlist);
241 		for (i = 0; i <= MAX_ISA_IRQ; i++)
242 			uppc_irq_shared_table[i] = 0;
243 		uppc_enable_acpi = 1;
244 	}
245 
246 	/*
247 	 * initialize the ipl mask
248 	 */
249 	for (i = 0; i < (MAXIPL << 1); i += 2) {
250 		/* enable slave lines on master */
251 		pp->c_iplmask[i] = 0xff;
252 		pp->c_iplmask[i+1] = (0xff & ~(1 << MASTERLINE));
253 	}
254 }
255 
256 /*ARGSUSED*/
257 static int
258 uppc_clkinit(int hertz)
259 {
260 	ulong_t clkticks = PIT_HZ / hz;
261 
262 	if (hertz == 0)
263 		return (0);	/* One shot mode not supported */
264 
265 	/*
266 	 * program timer 0
267 	 */
268 	outb(PITCTL_PORT, (PIT_C0|PIT_NDIVMODE|PIT_READMODE));
269 	outb(PITCTR0_PORT, (uchar_t)clkticks);
270 	outb(PITCTR0_PORT, (uchar_t)(clkticks>>8));
271 
272 	return (NSEC_IN_SEC / hertz);
273 }
274 
275 static void
276 uppc_picinit()
277 {
278 	picsetup();
279 
280 	/*
281 	 * If a valid SCI is present, manually addspl()
282 	 * since we're not set-up early enough in boot
283 	 * to do it "conventionally" (via add_avintr)
284 	 */
285 	if (uppc_sci >= 0)
286 		(void) uppc_addspl(uppc_sci, SCI_IPL, SCI_IPL, SCI_IPL);
287 }
288 
289 static int
290 uppc_post_cpu_start(void)
291 {
292 	/*
293 	 * On uppc machines psm_post_cpu_start is called during S3 resume
294 	 * on the boot cpu from assembly, using the ap_mlsetup vector.
295 	 */
296 
297 	/*
298 	 * Init master and slave pic
299 	 */
300 	picsetup();
301 
302 	/*
303 	 * program timer 0
304 	 */
305 	(void) uppc_clkinit(hz);
306 
307 	return (PSM_SUCCESS);
308 }
309 
310 /*ARGSUSED3*/
311 static int
312 uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl)
313 {
314 	struct standard_pic *pp;
315 	int i;
316 	int startidx;
317 	uchar_t	vectmask;
318 
319 	if (irqno <= MAX_ISA_IRQ)
320 		atomic_add_16(&uppc_irq_shared_table[irqno], 1);
321 
322 	if (ipl != min_ipl)
323 		return (0);
324 
325 	if (irqno > 7) {
326 		vectmask = 1 << (irqno - 8);
327 		startidx = (ipl << 1);
328 	} else {
329 		vectmask = 1 << irqno;
330 		startidx = (ipl << 1) + 1;
331 	}
332 
333 	/*
334 	 * mask intr same or above ipl
335 	 * level MAXIPL has all intr off as init. default
336 	 */
337 	pp = &pics0;
338 	for (i = startidx; i < (MAXIPL << 1); i += 2) {
339 		if (pp->c_iplmask[i] & vectmask)
340 			break;
341 		pp->c_iplmask[i] |= vectmask;
342 	}
343 
344 	/*
345 	 * unmask intr below ipl
346 	 */
347 	for (i = startidx-2; i >= 0; i -= 2) {
348 		if (!(pp->c_iplmask[i] & vectmask))
349 			break;
350 		pp->c_iplmask[i] &= ~vectmask;
351 	}
352 	return (0);
353 }
354 
355 static int
356 uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl)
357 {
358 	struct standard_pic *pp;
359 	int i;
360 	uchar_t	vectmask;
361 
362 	if (irqno <= MAX_ISA_IRQ)
363 		atomic_add_16(&uppc_irq_shared_table[irqno], -1);
364 
365 	/*
366 	 * skip if we are not deleting the last handler
367 	 * and the ipl is higher than minimum
368 	 */
369 	if ((max_ipl != PSM_INVALID_IPL) && (ipl >= min_ipl))
370 		return (0);
371 
372 	if (irqno > 7) {
373 		vectmask = 1 << (irqno - 8);
374 		i = 0;
375 	} else {
376 		vectmask = 1 << irqno;
377 		i = 1;
378 	}
379 
380 	pp = &pics0;
381 
382 	/*
383 	 * check any handlers left for this irqno
384 	 */
385 	if (max_ipl != PSM_INVALID_IPL) {
386 		/*
387 		 * unmasks all levels below the lowest priority
388 		 */
389 		i += ((min_ipl - 1) << 1);
390 		for (; i >= 0; i -= 2) {
391 			if (!(pp->c_iplmask[i] & vectmask))
392 				break;
393 			pp->c_iplmask[i] &= ~vectmask;
394 		}
395 	} else {
396 		/*
397 		 * set mask to all levels
398 		 */
399 		for (; i < (MAXIPL << 1); i += 2) {
400 			if (pp->c_iplmask[i] & vectmask)
401 				break;
402 			pp->c_iplmask[i] |= vectmask;
403 		}
404 	}
405 	return (0);
406 }
407 
408 static processorid_t
409 uppc_get_next_processorid(processorid_t cpu_id)
410 {
411 	if (cpu_id == -1)
412 		return (0);
413 	return (-1);
414 }
415 
416 /*ARGSUSED*/
417 static int
418 uppc_get_clockirq(int ipl)
419 {
420 	return (CLOCK_VECTOR);
421 }
422 
423 
424 static int
425 uppc_init_acpi(void)
426 {
427 	int verboseflags = 0;
428 	int	sci;
429 	iflag_t sci_flags;
430 
431 	/*
432 	 * Process SCI configuration here; this may return
433 	 * an error if acpi-user-options has specified
434 	 * legacy mode (use ACPI without ACPI mode or SCI)
435 	 */
436 	if (acpica_get_sci(&sci, &sci_flags) != AE_OK)
437 		sci = -1;
438 
439 	/*
440 	 * Initialize sub-system - if error is returns, ACPI is not
441 	 * used.
442 	 */
443 	if (acpica_init() != AE_OK)
444 		return (0);
445 
446 	/*
447 	 * uppc implies system is in PIC mode; set edge/level
448 	 * via ELCR based on return value from get_sci; this
449 	 * will default to level/low if no override present,
450 	 * as recommended by Intel ACPI CA team.
451 	 */
452 	if (sci >= 0) {
453 		ASSERT((sci_flags.intr_el == INTR_EL_LEVEL) ||
454 		    (sci_flags.intr_el == INTR_EL_EDGE));
455 
456 		psm_set_elcr(sci, sci_flags.intr_el == INTR_EL_LEVEL);
457 	}
458 
459 	/*
460 	 * Remember SCI for later use
461 	 */
462 	uppc_sci = sci;
463 
464 	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG)
465 		verboseflags |= PSM_VERBOSE_IRQ_FLAG;
466 
467 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG)
468 		verboseflags |= PSM_VERBOSE_POWEROFF_FLAG;
469 
470 	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_PAUSE_FLAG)
471 		verboseflags |= PSM_VERBOSE_POWEROFF_PAUSE_FLAG;
472 
473 	if (acpi_psm_init(uppc_info.p_mach_idstring, verboseflags) ==
474 	    ACPI_PSM_FAILURE) {
475 		return (0);
476 	}
477 
478 	return (1);
479 }
480 
481 
482 static void
483 uppc_preshutdown(int cmd, int fcn)
484 {
485 	UPPC_VERBOSE_POWEROFF(("uppc_preshutdown(%d,%d);\n", cmd, fcn));
486 
487 }
488 
489 static void
490 uppc_shutdown(int cmd, int fcn)
491 {
492 	UPPC_VERBOSE_POWEROFF(("uppc_shutdown(%d,%d);\n", cmd, fcn));
493 
494 	/*
495 	 * Return if passed a command other than A_SHUTDOWN or
496 	 * if we're not using ACPI.
497 	 */
498 	if ((cmd != A_SHUTDOWN) || (!uppc_enable_acpi))
499 		return;
500 
501 	/*
502 	 * Switch system back into Legacy-Mode if using ACPI and
503 	 * not powering-off.  Some BIOSes need to remain in ACPI-mode
504 	 * for power-off to succeed (Dell Dimension 4600)
505 	 */
506 	if (fcn != AD_POWEROFF) {
507 		(void) AcpiDisable();
508 		return;
509 	}
510 
511 	(void) acpi_poweroff();
512 }
513 
514 
515 static int
516 uppc_acpi_enter_picmode(void)
517 {
518 	ACPI_OBJECT_LIST	arglist;
519 	ACPI_OBJECT		arg;
520 	ACPI_STATUS		status;
521 
522 	/* Setup parameter object */
523 	arglist.Count = 1;
524 	arglist.Pointer = &arg;
525 	arg.Type = ACPI_TYPE_INTEGER;
526 	arg.Integer.Value = ACPI_PIC_MODE;
527 
528 	status = AcpiEvaluateObject(NULL, "\\_PIC", &arglist, NULL);
529 	if (ACPI_FAILURE(status))
530 		return (PSM_FAILURE);
531 	else
532 		return (PSM_SUCCESS);
533 }
534 
535 
536 struct pic_state {
537 	int8_t		mmask;
538 	int8_t		smask;
539 	uint16_t	elcr;
540 };
541 
542 
543 static void
544 pic_save_state(struct pic_state *sp)
545 {
546 	struct standard_pic *pp;
547 	int	vecno;
548 
549 	/*
550 	 * Only the PIC masks and the ELCR can be saved;
551 	 * other 8259 state is write-only
552 	 */
553 
554 	/*
555 	 * save current master and slave interrupt mask
556 	 */
557 	pp = &pics0;
558 	sp->smask = pp->c_curmask[0];
559 	sp->mmask = pp->c_curmask[1];
560 
561 	/*
562 	 * save edge/level configuration for isa interrupts
563 	 */
564 	sp->elcr = 0;
565 	for (vecno = 0; vecno <= MAX_ISA_IRQ; vecno++)
566 		sp->elcr |= psm_get_elcr(vecno) << vecno;
567 }
568 
569 static void
570 pic_restore_state(struct pic_state *sp)
571 {
572 	int	vecno;
573 
574 	/* Restore master and slave interrupt masks */
575 	outb(SIMR_PORT, sp->smask);
576 	outb(MIMR_PORT, sp->mmask);
577 
578 	/* Read master to allow pics to settle */
579 	(void) inb(MIMR_PORT);
580 
581 	/* Restore edge/level configuration for isa interupts */
582 	for (vecno = 0; vecno <= MAX_ISA_IRQ; vecno++)
583 		psm_set_elcr(vecno, sp->elcr & (1 << vecno));
584 
585 	/* Reenter PIC mode before restoring LNK devices */
586 	(void) uppc_acpi_enter_picmode();
587 
588 	/* Restore ACPI link device mappings */
589 	acpi_restore_link_devices();
590 }
591 
592 static int
593 uppc_state(psm_state_request_t *rp)
594 {
595 	switch (rp->psr_cmd) {
596 	case PSM_STATE_ALLOC:
597 		rp->req.psm_state_req.psr_state =
598 		    kmem_zalloc(sizeof (struct pic_state), KM_NOSLEEP);
599 		if (rp->req.psm_state_req.psr_state == NULL)
600 			return (ENOMEM);
601 		rp->req.psm_state_req.psr_state_size =
602 		    sizeof (struct pic_state);
603 		return (0);
604 	case PSM_STATE_FREE:
605 		kmem_free(rp->req.psm_state_req.psr_state,
606 		    rp->req.psm_state_req.psr_state_size);
607 		return (0);
608 	case PSM_STATE_SAVE:
609 		pic_save_state(rp->req.psm_state_req.psr_state);
610 		return (0);
611 	case PSM_STATE_RESTORE:
612 		pic_restore_state(rp->req.psm_state_req.psr_state);
613 		return (0);
614 	default:
615 		return (EINVAL);
616 	}
617 }
618 
619 
620 static int
621 uppc_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid,
622     int ipin, int *pci_irqp, iflag_t *intr_flagp)
623 {
624 	int status;
625 	acpi_psm_lnk_t acpipsmlnk;
626 
627 	if ((status = acpi_get_irq_cache_ent(busid, devid, ipin, pci_irqp,
628 	    intr_flagp)) == ACPI_PSM_SUCCESS) {
629 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Found irqno %d "
630 		    "from cache for device %s, instance #%d\n", *pci_irqp,
631 		    ddi_get_name(dip), ddi_get_instance(dip)));
632 		return (status);
633 	}
634 
635 	bzero(&acpipsmlnk, sizeof (acpi_psm_lnk_t));
636 
637 	if ((status = acpi_translate_pci_irq(dip, ipin, pci_irqp,
638 	    intr_flagp, &acpipsmlnk)) == ACPI_PSM_FAILURE) {
639 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: "
640 		    " acpi_translate_pci_irq failed for device %s, instance"
641 		    " #%d\n", ddi_get_name(dip), ddi_get_instance(dip)));
642 
643 		return (status);
644 	}
645 
646 	if (status == ACPI_PSM_PARTIAL && acpipsmlnk.lnkobj != NULL) {
647 		status = uppc_acpi_irq_configure(&acpipsmlnk, dip, pci_irqp,
648 		    intr_flagp);
649 		if (status != ACPI_PSM_SUCCESS) {
650 			status = acpi_get_current_irq_resource(&acpipsmlnk,
651 			    pci_irqp, intr_flagp);
652 		}
653 	}
654 
655 	if (status == ACPI_PSM_SUCCESS) {
656 		acpi_new_irq_cache_ent(busid, devid, ipin, *pci_irqp,
657 		    intr_flagp, &acpipsmlnk);
658 		psm_set_elcr(*pci_irqp, 1); 	/* set IRQ to PCI mode */
659 
660 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] "
661 		    "new irq %d for device %s, instance #%d\n",
662 		    *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip)));
663 	}
664 
665 	return (status);
666 }
667 
668 /*
669  * Configures the irq for the interrupt link device identified by
670  * acpipsmlnkp.
671  *
672  * Gets the current and the list of possible irq settings for the
673  * device. If uppc_unconditional_srs is not set, and the current
674  * resource setting is in the list of possible irq settings,
675  * current irq resource setting is passed to the caller.
676  *
677  * Otherwise, picks an irq number from the list of possible irq
678  * settings, and sets the irq of the device to this value.
679  * If prefer_crs is set, among a set of irq numbers in the list that have
680  * the least number of devices sharing the interrupt, we pick current irq
681  * resource setting if it is a member of this set.
682  *
683  * Passes the irq number in the value pointed to by pci_irqp, and
684  * polarity and sensitivity in the structure pointed to by dipintrflagp
685  * to the caller.
686  *
687  * Note that if setting the irq resource failed, but successfuly obtained
688  * the current irq resource settings, passes the current irq resources
689  * and considers it a success.
690  *
691  * Returns:
692  * ACPI_PSM_SUCCESS on success.
693  *
694  * ACPI_PSM_FAILURE if an error occured during the configuration or
695  * if a suitable irq was not found for this device, or if setting the
696  * irq resource and obtaining the current resource fails.
697  *
698  */
699 static int
700 uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
701     int *pci_irqp, iflag_t *dipintr_flagp)
702 {
703 	int i, min_share, foundnow, done = 0;
704 	int32_t irq;
705 	int32_t share_irq = -1;
706 	int32_t chosen_irq = -1;
707 	int cur_irq = -1;
708 	acpi_irqlist_t *irqlistp;
709 	acpi_irqlist_t *irqlistent;
710 
711 	if ((acpi_get_possible_irq_resources(acpipsmlnkp, &irqlistp))
712 	    == ACPI_PSM_FAILURE) {
713 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Unable to determine "
714 		    "or assign IRQ for device %s, instance #%d: The system was "
715 		    "unable to get the list of potential IRQs from ACPI.",
716 		    ddi_get_name(dip), ddi_get_instance(dip)));
717 
718 		return (ACPI_PSM_FAILURE);
719 	}
720 
721 	if ((acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
722 	    dipintr_flagp) == ACPI_PSM_SUCCESS) && (!uppc_unconditional_srs) &&
723 	    (cur_irq > 0)) {
724 
725 		if (acpi_irqlist_find_irq(irqlistp, cur_irq, NULL)
726 		    == ACPI_PSM_SUCCESS) {
727 
728 			acpi_free_irqlist(irqlistp);
729 			ASSERT(pci_irqp != NULL);
730 			*pci_irqp = cur_irq;
731 			return (ACPI_PSM_SUCCESS);
732 		}
733 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Could not find the "
734 		    "current irq %d for device %s, instance #%d in ACPI's "
735 		    "list of possible irqs for this device. Picking one from "
736 		    " the latter list.", cur_irq, ddi_get_name(dip),
737 		    ddi_get_instance(dip)));
738 
739 	}
740 
741 	irqlistent = irqlistp;
742 	min_share = 255;
743 
744 	while (irqlistent != NULL) {
745 
746 		for (foundnow = 0, i = 0; i < irqlistent->num_irqs; i++) {
747 
748 			irq = irqlistp->irqs[i];
749 
750 			if ((irq > MAX_ISA_IRQ) ||
751 			    (irqlistent->intr_flags.intr_el == INTR_EL_EDGE) ||
752 			    (irq == 0))
753 				continue;
754 
755 			if (uppc_reserved_irqlist[irq])
756 				continue;
757 
758 			if (uppc_irq_shared_table[irq] == 0) {
759 				chosen_irq = irq;
760 				foundnow = 1;
761 				if (!(uppc_prefer_crs) || (irq == cur_irq)) {
762 					done = 1;
763 					break;
764 				}
765 			}
766 
767 			if ((uppc_irq_shared_table[irq] < min_share) ||
768 			    ((uppc_irq_shared_table[irq] == min_share) &&
769 			    (cur_irq == irq) && (uppc_prefer_crs))) {
770 				min_share = uppc_irq_shared_table[irq];
771 				share_irq = irq;
772 				foundnow = 1;
773 			}
774 		}
775 
776 		/* If we found an IRQ in the inner loop, save the details */
777 		if (foundnow && ((chosen_irq != -1) || (share_irq != -1))) {
778 			/*
779 			 * Copy the acpi_prs_private_t and flags from this
780 			 * irq list entry, since we found an irq from this
781 			 * entry.
782 			 */
783 			acpipsmlnkp->acpi_prs_prv = irqlistent->acpi_prs_prv;
784 			*dipintr_flagp = irqlistent->intr_flags;
785 		}
786 
787 		if (done)
788 			break;
789 
790 		/* Load the next entry in the irqlist */
791 		irqlistent = irqlistent->next;
792 	}
793 
794 	acpi_free_irqlist(irqlistp);
795 
796 	if (chosen_irq != -1)
797 		irq = chosen_irq;
798 	else if (share_irq != -1)
799 		irq = share_irq;
800 	else {
801 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Could not find a "
802 		    "suitable irq from the list of possible irqs for device "
803 		    "%s, instance #%d in ACPI's list of possible\n",
804 		    ddi_get_name(dip), ddi_get_instance(dip)));
805 
806 		return (ACPI_PSM_FAILURE);
807 	}
808 
809 
810 	UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Setting irq %d for device %s "
811 	    "instance #%d\n", irq, ddi_get_name(dip), ddi_get_instance(dip)));
812 
813 	if ((acpi_set_irq_resource(acpipsmlnkp, irq)) == ACPI_PSM_SUCCESS) {
814 		/*
815 		 * setting irq was successful, check to make sure CRS
816 		 * reflects that. If CRS does not agree with what we
817 		 * set, return the irq that was set.
818 		 */
819 
820 		if (acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
821 		    dipintr_flagp) == ACPI_PSM_SUCCESS) {
822 
823 			if (cur_irq != irq)
824 				UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: "
825 				    "IRQ resource set (irqno %d) for device %s "
826 				    "instance #%d, differs from current "
827 				    "setting irqno %d",
828 				    irq, ddi_get_name(dip),
829 				    ddi_get_instance(dip), cur_irq));
830 		}
831 		/*
832 		 * return the irq that was set, and not what CRS reports,
833 		 * since CRS has been seen to be bogus on some systems
834 		 */
835 		cur_irq = irq;
836 	} else {
837 		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: set resource irq %d "
838 		    "failed for device %s instance #%d",
839 		    irq, ddi_get_name(dip), ddi_get_instance(dip)));
840 		if (cur_irq == -1)
841 			return (ACPI_PSM_FAILURE);
842 	}
843 
844 	ASSERT(pci_irqp != NULL);
845 	*pci_irqp = cur_irq;
846 	return (ACPI_PSM_SUCCESS);
847 }
848 
849 
850 /*ARGSUSED*/
851 static int
852 uppc_translate_irq(dev_info_t *dip, int irqno)
853 {
854 	char dev_type[16];
855 	int dev_len, pci_irq, devid, busid;
856 	ddi_acc_handle_t cfg_handle;
857 	uchar_t ipin, iline;
858 	iflag_t intr_flag;
859 
860 	if (dip == NULL) {
861 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno = %d"
862 		    " dip = NULL\n", irqno));
863 		return (irqno);
864 	}
865 
866 	if (!uppc_enable_acpi) {
867 		return (irqno);
868 	}
869 
870 	dev_len = sizeof (dev_type);
871 	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(dip),
872 	    DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type,
873 	    &dev_len) != DDI_PROP_SUCCESS) {
874 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno %d"
875 		    "device %s instance %d no device_type\n", irqno,
876 		    ddi_get_name(dip), ddi_get_instance(dip)));
877 		return (irqno);
878 	}
879 
880 	if ((strcmp(dev_type, "pci") == 0) ||
881 	    (strcmp(dev_type, "pciex") == 0)) {
882 
883 		/* pci device */
884 		if (acpica_get_bdf(dip, &busid, &devid, NULL) != 0)
885 			return (irqno);
886 
887 		if (pci_config_setup(dip, &cfg_handle) != DDI_SUCCESS)
888 			return (irqno);
889 
890 		ipin = pci_config_get8(cfg_handle, PCI_CONF_IPIN) - PCI_INTA;
891 		iline = pci_config_get8(cfg_handle, PCI_CONF_ILINE);
892 		if (uppc_acpi_translate_pci_irq(dip, busid, devid,
893 		    ipin, &pci_irq, &intr_flag) == ACPI_PSM_SUCCESS) {
894 
895 			UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] new irq "
896 			    "%d old irq %d device %s, instance %d\n", pci_irq,
897 			    irqno, ddi_get_name(dip), ddi_get_instance(dip)));
898 
899 			/*
900 			 * Make sure pci_irq is within range.
901 			 * Otherwise, fall through and return irqno.
902 			 */
903 			if (pci_irq <= MAX_ISA_IRQ) {
904 				if (iline != pci_irq) {
905 					/*
906 					 * Update the device's ILINE byte,
907 					 * in case uppc_acpi_translate_pci_irq
908 					 * has choosen a different pci_irq
909 					 * than the BIOS has configured.
910 					 * Some chipsets use the value in
911 					 * ILINE to control interrupt routing,
912 					 * in conflict with the PCI spec.
913 					 */
914 					pci_config_put8(cfg_handle,
915 					    PCI_CONF_ILINE, pci_irq);
916 				}
917 				pci_config_teardown(&cfg_handle);
918 				return (pci_irq);
919 			}
920 		}
921 		pci_config_teardown(&cfg_handle);
922 
923 		/* FALLTHRU to common case - returning irqno */
924 	} else {
925 		/* non-PCI; assumes ISA-style edge-triggered */
926 		psm_set_elcr(irqno, 0); 	/* set IRQ to ISA mode */
927 
928 		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: non-pci,"
929 		    "irqno %d device %s instance %d\n", irqno,
930 		    ddi_get_name(dip), ddi_get_instance(dip)));
931 	}
932 
933 	return (irqno);
934 }
935 
936 /*
937  * uppc_intr_enter() raises the ipl to the level of the current interrupt,
938  * and sends EOI to the pics.
939  * If interrupt is 7 or 15 and not spurious interrupt, send specific EOI
940  * else send non-specific EOI
941  * uppc_intr_enter() returns the new priority level,
942  * or -1 for spurious interrupt
943  */
944 static int
945 uppc_intr_enter(int ipl, int *vector)
946 {
947 	int newipl;
948 	int intno;
949 
950 	intno = (*vector);
951 
952 	ASSERT(intno < 256);
953 
954 	newipl = autovect[intno].avh_hi_pri;
955 
956 	/*
957 	 * During wait_till_seen() periods when interrupt vector is being
958 	 * removed in remove_av(), the removed hardware interrupt could
959 	 * trigger and got here with newipl 0.  It has to send EOI
960 	 * as usual but no need to call setspl and returns -1 like spurious.
961 	 */
962 	if ((intno & 7) != 7) {
963 		if (newipl)
964 			uppc_setspl(newipl);
965 		outb(MCMD_PORT, PIC_NSEOI);
966 		if (intno >= 8) {
967 			outb(SCMD_PORT, PIC_NSEOI);
968 		}
969 	} else { /* int was 7 or 15 */
970 		if (newipl && newipl <= ipl) { /* Check for spurious int */
971 			if (intno != 7)
972 				outb(MCMD_PORT, PIC_NSEOI);
973 			return (-1); /* Spurious int */
974 		} else {
975 			if (newipl)
976 				uppc_setspl(newipl);
977 			if (intno != 7) {
978 				outb(MCMD_PORT, PIC_NSEOI);
979 				outb(SCMD_PORT, PIC_SEOI_LVL7);
980 			} else  {
981 				outb(MCMD_PORT, PIC_SEOI_LVL7);
982 			}
983 		}
984 	}
985 
986 	if (newipl)
987 		return (newipl);
988 	else
989 		return (-1); /* not real spurious int */
990 }
991 
992 /*
993  * uppc_intr_exit() restores the old interrupt
994  * priority level after processing an interrupt.
995  * It is called with interrupts disabled, and does not enable interrupts.
996  */
997 /* ARGSUSED */
998 static void
999 uppc_intr_exit(int ipl, int vector)
1000 {
1001 	uppc_setspl(ipl);
1002 }
1003 
1004 /*
1005  * uppc_setspl() loads new interrupt masks into the pics
1006  * based on input ipl.
1007  */
1008 /* ARGSUSED */
1009 static void
1010 uppc_setspl(int ipl)
1011 {
1012 	struct standard_pic *pp;
1013 	uint8_t smask, mmask;
1014 	uint8_t cursmask, curmmask;
1015 
1016 	pp = &pics0;
1017 	smask = pp->c_iplmask[ipl * 2];
1018 	mmask = pp->c_iplmask[ipl * 2 + 1];
1019 	cursmask = pp->c_curmask[0];
1020 	curmmask = pp->c_curmask[1];
1021 	if (cursmask == smask && curmmask == mmask)
1022 		return;
1023 	pp->c_curmask[0] = smask;
1024 	pp->c_curmask[1] = mmask;
1025 
1026 	if (cursmask != smask) {
1027 		/*
1028 		 * program new slave pic mask
1029 		 */
1030 		outb(SIMR_PORT, smask);
1031 	}
1032 	if (curmmask != mmask) {
1033 		/*
1034 		 * program new master pic mask
1035 		 */
1036 		outb(MIMR_PORT, mmask);
1037 	}
1038 	/*
1039 	 * read master to allow pics to settle
1040 	 */
1041 	(void) inb(MIMR_PORT);
1042 }
1043 
1044 /*
1045  * uppc_gethrtime() returns high resolution timer value
1046  */
1047 static hrtime_t
1048 uppc_gethrtime()
1049 {
1050 	hrtime_t timeval, temp;
1051 	unsigned int ctr0;
1052 	ulong_t oflags;
1053 
1054 	oflags = intr_clear(); /* disable ints */
1055 	lock_set(&uppc_gethrtime_lock);
1056 retry:
1057 	temp = hrtime_base;
1058 	outb(PITCTL_PORT, 0);	/* latch counter 0 */
1059 	/*
1060 	 * read counter 0
1061 	 */
1062 	ctr0 = inb(PITCTR0_PORT);
1063 	ctr0 |= inb(PITCTR0_PORT) << 8;
1064 	timeval = (hrtime_t)ctr0 * (NANOSEC / PIT_HZ);
1065 	if (temp != hrtime_base)
1066 		goto retry;
1067 	timeval -= temp;
1068 	if (timeval < uppc_lasthrtime)
1069 		timeval = uppc_lasthrtime;
1070 	uppc_lasthrtime = timeval;
1071 	lock_clear(&uppc_gethrtime_lock);
1072 	intr_restore(oflags);
1073 	return (timeval);
1074 }
1075