xref: /titanic_44/usr/src/uts/i86pc/io/pciex/npe.c (revision 581cede61ac9c14d8d4ea452562a567189eead78)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  *	Host to PCI-Express local bus driver
29  */
30 
31 #include <sys/conf.h>
32 #include <sys/modctl.h>
33 #include <sys/pci_impl.h>
34 #include <sys/pcie_impl.h>
35 #include <sys/sysmacros.h>
36 #include <sys/ddi_intr.h>
37 #include <sys/sunndi.h>
38 #include <sys/sunddi.h>
39 #include <sys/ddifm.h>
40 #include <sys/ndifm.h>
41 #include <sys/fm/util.h>
42 #include <sys/hotplug/pci/pcihp.h>
43 #include <io/pci/pci_tools_ext.h>
44 #include <io/pci/pci_common.h>
45 #include <io/pciex/pcie_nvidia.h>
46 
47 /*
48  * Helper Macros
49  */
50 #define	NPE_IS_HANDLE_FOR_STDCFG_ACC(hp) \
51 	((hp) != NULL &&						\
52 	((ddi_acc_hdl_t *)(hp))->ah_platform_private != NULL &&		\
53 	(((ddi_acc_impl_t *)((ddi_acc_hdl_t *)(hp))->			\
54 	ah_platform_private)->						\
55 	    ahi_acc_attr &(DDI_ACCATTR_CPU_VADDR|DDI_ACCATTR_CONFIG_SPACE)) \
56 		== DDI_ACCATTR_CONFIG_SPACE)
57 
58 /*
59  * Bus Operation functions
60  */
61 static int	npe_bus_map(dev_info_t *, dev_info_t *, ddi_map_req_t *,
62 		    off_t, off_t, caddr_t *);
63 static int	npe_ctlops(dev_info_t *, dev_info_t *, ddi_ctl_enum_t,
64 		    void *, void *);
65 static int	npe_intr_ops(dev_info_t *, dev_info_t *, ddi_intr_op_t,
66 		    ddi_intr_handle_impl_t *, void *);
67 static int	npe_fm_init(dev_info_t *, dev_info_t *, int,
68 		    ddi_iblock_cookie_t *);
69 
70 static int	npe_fm_callback(dev_info_t *, ddi_fm_error_t *, const void *);
71 
72 /*
73  * Disable URs and Received MA for all PCIe devices.  Until x86 SW is changed so
74  * that random drivers do not do PIO accesses on devices that it does not own,
75  * these error bits must be disabled.  SERR must also be disabled if URs have
76  * been masked.
77  */
78 uint32_t	npe_aer_uce_mask = PCIE_AER_UCE_UR;
79 uint32_t	npe_aer_ce_mask = 0;
80 uint32_t	npe_aer_suce_mask = PCIE_AER_SUCE_RCVD_MA;
81 
82 struct bus_ops npe_bus_ops = {
83 	BUSO_REV,
84 	npe_bus_map,
85 	NULL,
86 	NULL,
87 	NULL,
88 	i_ddi_map_fault,
89 	ddi_dma_map,
90 	ddi_dma_allochdl,
91 	ddi_dma_freehdl,
92 	ddi_dma_bindhdl,
93 	ddi_dma_unbindhdl,
94 	ddi_dma_flush,
95 	ddi_dma_win,
96 	ddi_dma_mctl,
97 	npe_ctlops,
98 	ddi_bus_prop_op,
99 	0,		/* (*bus_get_eventcookie)();	*/
100 	0,		/* (*bus_add_eventcall)();	*/
101 	0,		/* (*bus_remove_eventcall)();	*/
102 	0,		/* (*bus_post_event)();		*/
103 	0,		/* (*bus_intr_ctl)(); */
104 	0,		/* (*bus_config)(); */
105 	0,		/* (*bus_unconfig)(); */
106 	npe_fm_init,	/* (*bus_fm_init)(); */
107 	NULL,		/* (*bus_fm_fini)(); */
108 	NULL,		/* (*bus_fm_access_enter)(); */
109 	NULL,		/* (*bus_fm_access_exit)(); */
110 	NULL,		/* (*bus_power)(); */
111 	npe_intr_ops	/* (*bus_intr_op)(); */
112 };
113 
114 /*
115  * One goal here is to leverage off of the pcihp.c source without making
116  * changes to it.  Call into it's cb_ops directly if needed, piggybacking
117  * anything else needed by the pci_tools.c module.  Only pci_tools and pcihp
118  * will be using the PCI devctl node.
119  */
120 static int	npe_open(dev_t *, int, int, cred_t *);
121 static int	npe_close(dev_t, int, int, cred_t *);
122 static int	npe_ioctl(dev_t, int, intptr_t, int, cred_t *, int *);
123 static int	npe_prop_op(dev_t, dev_info_t *, ddi_prop_op_t, int, char *,
124 		    caddr_t, int *);
125 static int	npe_info(dev_info_t *, ddi_info_cmd_t, void *, void **);
126 
127 struct cb_ops npe_cb_ops = {
128 	npe_open,			/* open */
129 	npe_close,			/* close */
130 	nodev,				/* strategy */
131 	nodev,				/* print */
132 	nodev,				/* dump */
133 	nodev,				/* read */
134 	nodev,				/* write */
135 	npe_ioctl,			/* ioctl */
136 	nodev,				/* devmap */
137 	nodev,				/* mmap */
138 	nodev,				/* segmap */
139 	nochpoll,			/* poll */
140 	npe_prop_op,			/* cb_prop_op */
141 	NULL,				/* streamtab */
142 	D_NEW | D_MP | D_HOTPLUG,	/* Driver compatibility flag */
143 	CB_REV,				/* rev */
144 	nodev,				/* int (*cb_aread)() */
145 	nodev				/* int (*cb_awrite)() */
146 };
147 
148 
149 /*
150  * Device Node Operation functions
151  */
152 static int	npe_attach(dev_info_t *devi, ddi_attach_cmd_t cmd);
153 static int	npe_detach(dev_info_t *devi, ddi_detach_cmd_t cmd);
154 
155 struct dev_ops npe_ops = {
156 	DEVO_REV,		/* devo_rev */
157 	0,			/* refcnt  */
158 	npe_info,		/* info */
159 	nulldev,		/* identify */
160 	nulldev,		/* probe */
161 	npe_attach,		/* attach */
162 	npe_detach,		/* detach */
163 	nulldev,		/* reset */
164 	&npe_cb_ops,		/* driver operations */
165 	&npe_bus_ops,		/* bus operations */
166 	NULL,			/* power */
167 	ddi_quiesce_not_needed,		/* quiesce */
168 };
169 
170 /*
171  * Internal routines in support of particular npe_ctlops.
172  */
173 static int npe_removechild(dev_info_t *child);
174 static int npe_initchild(dev_info_t *child);
175 
176 /*
177  * External support routine
178  */
179 extern void	npe_query_acpi_mcfg(dev_info_t *dip);
180 extern void	npe_ck804_fix_aer_ptr(ddi_acc_handle_t cfg_hdl);
181 extern int	npe_disable_empty_bridges_workaround(dev_info_t *child);
182 extern void	npe_nvidia_error_mask(ddi_acc_handle_t cfg_hdl);
183 extern void	npe_intel_error_mask(ddi_acc_handle_t cfg_hdl);
184 extern boolean_t npe_is_mmcfg_supported(dev_info_t *dip);
185 extern void	npe_enable_htmsi_children(dev_info_t *dip);
186 extern int	npe_save_htconfig_children(dev_info_t *dip);
187 extern int	npe_restore_htconfig_children(dev_info_t *dip);
188 
189 /*
190  * Module linkage information for the kernel.
191  */
192 static struct modldrv modldrv = {
193 	&mod_driverops, /* Type of module */
194 	"Host to PCIe nexus driver",
195 	&npe_ops,	/* driver ops */
196 };
197 
198 static struct modlinkage modlinkage = {
199 	MODREV_1,
200 	(void *)&modldrv,
201 	NULL
202 };
203 
204 /* Save minimal state. */
205 void *npe_statep;
206 
207 int
208 _init(void)
209 {
210 	int e;
211 
212 	/*
213 	 * Initialize per-pci bus soft state pointer.
214 	 */
215 	e = ddi_soft_state_init(&npe_statep, sizeof (pci_state_t), 1);
216 	if (e != 0)
217 		return (e);
218 
219 	if ((e = mod_install(&modlinkage)) != 0)
220 		ddi_soft_state_fini(&npe_statep);
221 
222 	return (e);
223 }
224 
225 
226 int
227 _fini(void)
228 {
229 	int rc;
230 
231 	rc = mod_remove(&modlinkage);
232 	if (rc != 0)
233 		return (rc);
234 
235 	ddi_soft_state_fini(&npe_statep);
236 	return (rc);
237 }
238 
239 
240 int
241 _info(struct modinfo *modinfop)
242 {
243 	return (mod_info(&modlinkage, modinfop));
244 }
245 
246 /*ARGSUSED*/
247 static int
248 npe_attach(dev_info_t *devi, ddi_attach_cmd_t cmd)
249 {
250 	/*
251 	 * Use the minor number as constructed by pcihp, as the index value to
252 	 * ddi_soft_state_zalloc.
253 	 */
254 	int instance = ddi_get_instance(devi);
255 	pci_state_t *pcip = NULL;
256 
257 	if (cmd == DDI_RESUME) {
258 		/*
259 		 * the system might still be able to resume even if this fails
260 		 */
261 		(void) npe_restore_htconfig_children(devi);
262 		return (DDI_SUCCESS);
263 	}
264 
265 	/*
266 	 * We must do this here in order to ensure that all top level devices
267 	 * get their HyperTransport MSI mapping regs programmed first.
268 	 * "Memory controller" and "hostbridge" class devices are leaf devices
269 	 * that may affect MSI translation functionality for devices
270 	 * connected to the same link/bus.
271 	 *
272 	 * This will also program HT MSI mapping registers on root buses
273 	 * devices (basically sitting on an HT bus) that are not dependent
274 	 * on the aforementioned HT devices for MSI translation.
275 	 */
276 	npe_enable_htmsi_children(devi);
277 
278 	if (ddi_prop_update_string(DDI_DEV_T_NONE, devi, "device_type",
279 	    "pciex") != DDI_PROP_SUCCESS) {
280 		cmn_err(CE_WARN, "npe:  'device_type' prop create failed");
281 	}
282 
283 	if (ddi_soft_state_zalloc(npe_statep, instance) == DDI_SUCCESS)
284 		pcip = ddi_get_soft_state(npe_statep, instance);
285 
286 	if (pcip == NULL)
287 		return (DDI_FAILURE);
288 
289 	pcip->pci_dip = devi;
290 
291 	pcie_rc_init_bus(devi);
292 
293 	/*
294 	 * Initialize hotplug support on this bus. At minimum
295 	 * (for non hotplug bus) this would create ":devctl" minor
296 	 * node to support DEVCTL_DEVICE_* and DEVCTL_BUS_* ioctls
297 	 * to this bus.
298 	 */
299 	if (pcihp_init(devi) != DDI_SUCCESS) {
300 		cmn_err(CE_WARN, "npe: Failed to setup hotplug framework");
301 		ddi_soft_state_free(npe_statep, instance);
302 		return (DDI_FAILURE);
303 	}
304 
305 	/* Second arg: initialize for pci_express root nexus */
306 	if (pcitool_init(devi, B_TRUE) != DDI_SUCCESS) {
307 		(void) pcihp_uninit(devi);
308 		ddi_soft_state_free(npe_statep, instance);
309 		return (DDI_FAILURE);
310 	}
311 
312 	pcip->pci_fmcap = DDI_FM_EREPORT_CAPABLE | DDI_FM_ERRCB_CAPABLE |
313 	    DDI_FM_ACCCHK_CAPABLE | DDI_FM_DMACHK_CAPABLE;
314 	ddi_fm_init(devi, &pcip->pci_fmcap, &pcip->pci_fm_ibc);
315 
316 	if (pcip->pci_fmcap & DDI_FM_ERRCB_CAPABLE) {
317 		ddi_fm_handler_register(devi, npe_fm_callback, NULL);
318 	}
319 
320 	PCIE_DIP2PFD(devi) = kmem_zalloc(sizeof (pf_data_t), KM_SLEEP);
321 	pcie_rc_init_pfd(devi, PCIE_DIP2PFD(devi));
322 
323 	npe_query_acpi_mcfg(devi);
324 	ddi_report_dev(devi);
325 	return (DDI_SUCCESS);
326 
327 }
328 
329 /*ARGSUSED*/
330 static int
331 npe_detach(dev_info_t *devi, ddi_detach_cmd_t cmd)
332 {
333 	int instance = ddi_get_instance(devi);
334 	pci_state_t *pcip;
335 
336 	pcip = ddi_get_soft_state(npe_statep, ddi_get_instance(devi));
337 
338 	switch (cmd) {
339 	case DDI_DETACH:
340 
341 		/* Uninitialize pcitool support. */
342 		pcitool_uninit(devi);
343 
344 		/*
345 		 * Uninitialize hotplug support on this bus.
346 		 */
347 		(void) pcihp_uninit(devi);
348 
349 		if (pcip->pci_fmcap & DDI_FM_ERRCB_CAPABLE)
350 			ddi_fm_handler_unregister(devi);
351 
352 		pcie_rc_fini_bus(devi);
353 		pcie_rc_fini_pfd(PCIE_DIP2PFD(devi));
354 		kmem_free(PCIE_DIP2PFD(devi), sizeof (pf_data_t));
355 
356 		ddi_fm_fini(devi);
357 		ddi_soft_state_free(npe_statep, instance);
358 		return (DDI_SUCCESS);
359 
360 	case DDI_SUSPEND:
361 		/*
362 		 * the system might still be able to suspend/resume even if
363 		 * this fails
364 		 */
365 		(void) npe_save_htconfig_children(devi);
366 		return (DDI_SUCCESS);
367 	default:
368 		return (DDI_FAILURE);
369 	}
370 }
371 
372 /*
373  * Configure the access handle for standard configuration space
374  * access (see pci_fm_acc_setup for code that initializes the
375  * access-function pointers).
376  */
377 static int
378 npe_setup_std_pcicfg_acc(dev_info_t *rdip, ddi_map_req_t *mp,
379     ddi_acc_hdl_t *hp, off_t offset, off_t len)
380 {
381 	int ret;
382 
383 	if ((ret = pci_fm_acc_setup(hp, offset, len)) ==
384 	    DDI_SUCCESS) {
385 		if (DDI_FM_ACC_ERR_CAP(ddi_fm_capable(rdip)) &&
386 		    mp->map_handlep->ah_acc.devacc_attr_access
387 		    != DDI_DEFAULT_ACC) {
388 			ndi_fmc_insert(rdip, ACC_HANDLE,
389 			    (void *)mp->map_handlep, NULL);
390 		}
391 	}
392 	return (ret);
393 }
394 
395 static int
396 npe_bus_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp,
397     off_t offset, off_t len, caddr_t *vaddrp)
398 {
399 	int 		rnumber;
400 	int		length;
401 	int		space;
402 	ddi_acc_impl_t	*ap;
403 	ddi_acc_hdl_t	*hp;
404 	ddi_map_req_t	mr;
405 	pci_regspec_t	pci_reg;
406 	pci_regspec_t	*pci_rp;
407 	struct regspec	reg;
408 	pci_acc_cfblk_t	*cfp;
409 	int		retval;
410 	int64_t		*ecfginfo;
411 	uint_t		nelem;
412 
413 	mr = *mp; /* Get private copy of request */
414 	mp = &mr;
415 
416 	/*
417 	 * check for register number
418 	 */
419 	switch (mp->map_type) {
420 	case DDI_MT_REGSPEC:
421 		pci_reg = *(pci_regspec_t *)(mp->map_obj.rp);
422 		pci_rp = &pci_reg;
423 		if (pci_common_get_reg_prop(rdip, pci_rp) != DDI_SUCCESS)
424 			return (DDI_FAILURE);
425 		break;
426 	case DDI_MT_RNUMBER:
427 		rnumber = mp->map_obj.rnumber;
428 		/*
429 		 * get ALL "reg" properties for dip, select the one of
430 		 * of interest. In x86, "assigned-addresses" property
431 		 * is identical to the "reg" property, so there is no
432 		 * need to cross check the two to determine the physical
433 		 * address of the registers.
434 		 * This routine still performs some validity checks to
435 		 * make sure that everything is okay.
436 		 */
437 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, rdip,
438 		    DDI_PROP_DONTPASS, "reg", (int **)&pci_rp,
439 		    (uint_t *)&length) != DDI_PROP_SUCCESS)
440 			return (DDI_FAILURE);
441 
442 		/*
443 		 * validate the register number.
444 		 */
445 		length /= (sizeof (pci_regspec_t) / sizeof (int));
446 		if (rnumber >= length) {
447 			ddi_prop_free(pci_rp);
448 			return (DDI_FAILURE);
449 		}
450 
451 		/*
452 		 * copy the required entry.
453 		 */
454 		pci_reg = pci_rp[rnumber];
455 
456 		/*
457 		 * free the memory allocated by ddi_prop_lookup_int_array
458 		 */
459 		ddi_prop_free(pci_rp);
460 
461 		pci_rp = &pci_reg;
462 		if (pci_common_get_reg_prop(rdip, pci_rp) != DDI_SUCCESS)
463 			return (DDI_FAILURE);
464 		mp->map_type = DDI_MT_REGSPEC;
465 		break;
466 	default:
467 		return (DDI_ME_INVAL);
468 	}
469 
470 	space = pci_rp->pci_phys_hi & PCI_REG_ADDR_M;
471 
472 	/*
473 	 * check for unmap and unlock of address space
474 	 */
475 	if ((mp->map_op == DDI_MO_UNMAP) || (mp->map_op == DDI_MO_UNLOCK)) {
476 		switch (space) {
477 		case PCI_ADDR_IO:
478 			reg.regspec_bustype = 1;
479 			break;
480 
481 		case PCI_ADDR_CONFIG:
482 			/*
483 			 * If this is an unmap/unlock of a standard config
484 			 * space mapping (memory-mapped config space mappings
485 			 * would have the DDI_ACCATTR_CPU_VADDR bit set in the
486 			 * acc_attr), undo that setup here.
487 			 */
488 			if (NPE_IS_HANDLE_FOR_STDCFG_ACC(mp->map_handlep)) {
489 
490 				if (DDI_FM_ACC_ERR_CAP(ddi_fm_capable(rdip)) &&
491 				    mp->map_handlep->ah_acc.devacc_attr_access
492 				    != DDI_DEFAULT_ACC) {
493 					ndi_fmc_remove(rdip, ACC_HANDLE,
494 					    (void *)mp->map_handlep);
495 				}
496 				return (DDI_SUCCESS);
497 			}
498 
499 			pci_rp->pci_size_low = PCIE_CONF_HDR_SIZE;
500 
501 			/* FALLTHROUGH */
502 		case PCI_ADDR_MEM64:
503 			/*
504 			 * MEM64 requires special treatment on map, to check
505 			 * that the device is below 4G.  On unmap, however,
506 			 * we can assume that everything is OK... the map
507 			 * must have succeeded.
508 			 */
509 			/* FALLTHROUGH */
510 		case PCI_ADDR_MEM32:
511 			reg.regspec_bustype = 0;
512 			break;
513 
514 		default:
515 			return (DDI_FAILURE);
516 		}
517 
518 		/*
519 		 * Adjust offset and length
520 		 * A non-zero length means override the one in the regspec.
521 		 */
522 		pci_rp->pci_phys_low += (uint_t)offset;
523 		if (len != 0)
524 			pci_rp->pci_size_low = len;
525 
526 		reg.regspec_addr = pci_rp->pci_phys_low;
527 		reg.regspec_size = pci_rp->pci_size_low;
528 
529 		mp->map_obj.rp = &reg;
530 		retval = ddi_map(dip, mp, (off_t)0, (off_t)0, vaddrp);
531 		if (DDI_FM_ACC_ERR_CAP(ddi_fm_capable(rdip)) &&
532 		    mp->map_handlep->ah_acc.devacc_attr_access !=
533 		    DDI_DEFAULT_ACC) {
534 			ndi_fmc_remove(rdip, ACC_HANDLE,
535 			    (void *)mp->map_handlep);
536 		}
537 		return (retval);
538 
539 	}
540 
541 	/* check for user mapping request - not legal for Config */
542 	if (mp->map_op == DDI_MO_MAP_HANDLE && space == PCI_ADDR_CONFIG) {
543 		cmn_err(CE_NOTE, "npe: Config mapping request from user\n");
544 		return (DDI_FAILURE);
545 	}
546 
547 
548 	/*
549 	 * Note that pci_fm_acc_setup() is called to serve two purposes
550 	 * i) enable legacy PCI I/O style config space access
551 	 * ii) register with FMA
552 	 */
553 	if (space == PCI_ADDR_CONFIG) {
554 
555 		/* Can't map config space without a handle */
556 		hp = (ddi_acc_hdl_t *)mp->map_handlep;
557 		if (hp == NULL)
558 			return (DDI_FAILURE);
559 
560 		/* record the device address for future reference */
561 		cfp = (pci_acc_cfblk_t *)&hp->ah_bus_private;
562 		cfp->c_busnum = PCI_REG_BUS_G(pci_rp->pci_phys_hi);
563 		cfp->c_devnum = PCI_REG_DEV_G(pci_rp->pci_phys_hi);
564 		cfp->c_funcnum = PCI_REG_FUNC_G(pci_rp->pci_phys_hi);
565 
566 		*vaddrp = (caddr_t)offset;
567 
568 		/* Check if MMCFG is supported */
569 		if (!npe_is_mmcfg_supported(rdip)) {
570 			return (npe_setup_std_pcicfg_acc(rdip, mp, hp,
571 			    offset, len));
572 		}
573 
574 
575 		if (ddi_prop_lookup_int64_array(DDI_DEV_T_ANY, rdip, 0,
576 		    "ecfg", &ecfginfo, &nelem) == DDI_PROP_SUCCESS) {
577 
578 			if (nelem != 4 ||
579 			    cfp->c_busnum < ecfginfo[2] ||
580 			    cfp->c_busnum > ecfginfo[3]) {
581 				/*
582 				 * Invalid property or Doesn't contain the
583 				 * requested bus; fall back to standard
584 				 * (I/O-based) config access.
585 				 */
586 				ddi_prop_free(ecfginfo);
587 				return (npe_setup_std_pcicfg_acc(rdip, mp, hp,
588 				    offset, len));
589 			} else {
590 				pci_rp->pci_phys_low = ecfginfo[0];
591 
592 				ddi_prop_free(ecfginfo);
593 
594 				pci_rp->pci_phys_low += ((cfp->c_busnum << 20) |
595 				    (cfp->c_devnum) << 15 |
596 				    (cfp->c_funcnum << 12));
597 
598 				pci_rp->pci_size_low = PCIE_CONF_HDR_SIZE;
599 			}
600 		} else {
601 			/*
602 			 * Couldn't find the MMCFG property -- fall back to
603 			 * standard config access
604 			 */
605 			return (npe_setup_std_pcicfg_acc(rdip, mp, hp,
606 			    offset, len));
607 		}
608 	}
609 
610 	length = pci_rp->pci_size_low;
611 
612 	/*
613 	 * range check
614 	 */
615 	if ((offset >= length) || (len > length) || (offset + len > length))
616 		return (DDI_FAILURE);
617 
618 	/*
619 	 * Adjust offset and length
620 	 * A non-zero length means override the one in the regspec.
621 	 */
622 	pci_rp->pci_phys_low += (uint_t)offset;
623 	if (len != 0)
624 		pci_rp->pci_size_low = len;
625 
626 	/*
627 	 * convert the pci regsec into the generic regspec used by the
628 	 * parent root nexus driver.
629 	 */
630 	switch (space) {
631 	case PCI_ADDR_IO:
632 		reg.regspec_bustype = 1;
633 		break;
634 	case PCI_ADDR_CONFIG:
635 	case PCI_ADDR_MEM64:
636 		/*
637 		 * We can't handle 64-bit devices that are mapped above
638 		 * 4G or that are larger than 4G.
639 		 */
640 		if (pci_rp->pci_phys_mid != 0 || pci_rp->pci_size_hi != 0)
641 			return (DDI_FAILURE);
642 		/*
643 		 * Other than that, we can treat them as 32-bit mappings
644 		 */
645 		/* FALLTHROUGH */
646 	case PCI_ADDR_MEM32:
647 		reg.regspec_bustype = 0;
648 		break;
649 	default:
650 		return (DDI_FAILURE);
651 	}
652 
653 	reg.regspec_addr = pci_rp->pci_phys_low;
654 	reg.regspec_size = pci_rp->pci_size_low;
655 
656 	mp->map_obj.rp = &reg;
657 	retval = ddi_map(dip, mp, (off_t)0, (off_t)0, vaddrp);
658 	if (retval == DDI_SUCCESS) {
659 		/*
660 		 * For config space gets force use of cautious access routines.
661 		 * These will handle default and protected mode accesses too.
662 		 */
663 		if (space == PCI_ADDR_CONFIG) {
664 			ap = (ddi_acc_impl_t *)mp->map_handlep;
665 			ap->ahi_acc_attr &= ~DDI_ACCATTR_DIRECT;
666 			ap->ahi_acc_attr |= DDI_ACCATTR_CONFIG_SPACE;
667 			ap->ahi_get8 = i_ddi_caut_get8;
668 			ap->ahi_get16 = i_ddi_caut_get16;
669 			ap->ahi_get32 = i_ddi_caut_get32;
670 			ap->ahi_get64 = i_ddi_caut_get64;
671 			ap->ahi_rep_get8 = i_ddi_caut_rep_get8;
672 			ap->ahi_rep_get16 = i_ddi_caut_rep_get16;
673 			ap->ahi_rep_get32 = i_ddi_caut_rep_get32;
674 			ap->ahi_rep_get64 = i_ddi_caut_rep_get64;
675 		}
676 		if (DDI_FM_ACC_ERR_CAP(ddi_fm_capable(rdip)) &&
677 		    mp->map_handlep->ah_acc.devacc_attr_access !=
678 		    DDI_DEFAULT_ACC) {
679 			ndi_fmc_insert(rdip, ACC_HANDLE,
680 			    (void *)mp->map_handlep, NULL);
681 		}
682 	}
683 	return (retval);
684 }
685 
686 
687 
688 /*ARGSUSED*/
689 static int
690 npe_ctlops(dev_info_t *dip, dev_info_t *rdip,
691 	ddi_ctl_enum_t ctlop, void *arg, void *result)
692 {
693 	int		rn;
694 	int		totreg;
695 	uint_t		reglen;
696 	pci_regspec_t	*drv_regp;
697 	struct attachspec *asp;
698 	struct detachspec *dsp;
699 	pci_state_t	*pci_p = ddi_get_soft_state(npe_statep,
700 	    ddi_get_instance(dip));
701 
702 	switch (ctlop) {
703 	case DDI_CTLOPS_REPORTDEV:
704 		if (rdip == (dev_info_t *)0)
705 			return (DDI_FAILURE);
706 		cmn_err(CE_CONT, "?PCI Express-device: %s@%s, %s%d\n",
707 		    ddi_node_name(rdip), ddi_get_name_addr(rdip),
708 		    ddi_driver_name(rdip), ddi_get_instance(rdip));
709 		return (DDI_SUCCESS);
710 
711 	case DDI_CTLOPS_INITCHILD:
712 		return (npe_initchild((dev_info_t *)arg));
713 
714 	case DDI_CTLOPS_UNINITCHILD:
715 		return (npe_removechild((dev_info_t *)arg));
716 
717 	case DDI_CTLOPS_SIDDEV:
718 		return (DDI_SUCCESS);
719 
720 	case DDI_CTLOPS_REGSIZE:
721 	case DDI_CTLOPS_NREGS:
722 		if (rdip == (dev_info_t *)0)
723 			return (DDI_FAILURE);
724 
725 		*(int *)result = 0;
726 		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, rdip,
727 		    DDI_PROP_DONTPASS, "reg", (int **)&drv_regp,
728 		    &reglen) != DDI_PROP_SUCCESS) {
729 			return (DDI_FAILURE);
730 		}
731 
732 		totreg = (reglen * sizeof (int)) / sizeof (pci_regspec_t);
733 		if (ctlop == DDI_CTLOPS_NREGS)
734 			*(int *)result = totreg;
735 		else if (ctlop == DDI_CTLOPS_REGSIZE) {
736 			rn = *(int *)arg;
737 			if (rn >= totreg) {
738 				ddi_prop_free(drv_regp);
739 				return (DDI_FAILURE);
740 			}
741 			*(off_t *)result = drv_regp[rn].pci_size_low;
742 		}
743 		ddi_prop_free(drv_regp);
744 
745 		return (DDI_SUCCESS);
746 
747 	case DDI_CTLOPS_POWER:
748 	{
749 		power_req_t	*reqp = (power_req_t *)arg;
750 		/*
751 		 * We currently understand reporting of PCI_PM_IDLESPEED
752 		 * capability. Everything else is passed up.
753 		 */
754 		if ((reqp->request_type == PMR_REPORT_PMCAP) &&
755 		    (reqp->req.report_pmcap_req.cap ==  PCI_PM_IDLESPEED))
756 			return (DDI_SUCCESS);
757 
758 		break;
759 	}
760 
761 	case DDI_CTLOPS_PEEK:
762 	case DDI_CTLOPS_POKE:
763 		return (pci_common_peekpoke(dip, rdip, ctlop, arg, result));
764 
765 	/* X86 systems support PME wakeup from suspended state */
766 	case DDI_CTLOPS_ATTACH:
767 		if (!pcie_is_child(dip, rdip))
768 			return (DDI_SUCCESS);
769 
770 		asp = (struct attachspec *)arg;
771 		if ((asp->when == DDI_POST) && (asp->result == DDI_SUCCESS)) {
772 			pf_init(rdip, (void *)pci_p->pci_fm_ibc, asp->cmd);
773 			(void) pcie_postattach_child(rdip);
774 		}
775 
776 		/* only do this for immediate children */
777 		if (asp->cmd == DDI_RESUME && asp->when == DDI_PRE &&
778 		    ddi_get_parent(rdip) == dip)
779 			if (pci_pre_resume(rdip) != DDI_SUCCESS) {
780 				/* Not good, better stop now. */
781 				cmn_err(CE_PANIC,
782 				    "Couldn't pre-resume device %p",
783 				    (void *) dip);
784 				/* NOTREACHED */
785 			}
786 
787 		return (DDI_SUCCESS);
788 
789 	case DDI_CTLOPS_DETACH:
790 		if (!pcie_is_child(dip, rdip))
791 			return (DDI_SUCCESS);
792 
793 		dsp = (struct detachspec *)arg;
794 
795 		if (dsp->when == DDI_PRE)
796 			pf_fini(rdip, dsp->cmd);
797 
798 		/* only do this for immediate children */
799 		if (dsp->cmd == DDI_SUSPEND && dsp->when == DDI_POST &&
800 		    ddi_get_parent(rdip) == dip)
801 			if (pci_post_suspend(rdip) != DDI_SUCCESS)
802 				return (DDI_FAILURE);
803 
804 		return (DDI_SUCCESS);
805 
806 	default:
807 		break;
808 	}
809 
810 	return (ddi_ctlops(dip, rdip, ctlop, arg, result));
811 
812 }
813 
814 
815 /*
816  * npe_intr_ops
817  */
818 static int
819 npe_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t intr_op,
820     ddi_intr_handle_impl_t *hdlp, void *result)
821 {
822 	return (pci_common_intr_ops(pdip, rdip, intr_op, hdlp, result));
823 }
824 
825 
826 static int
827 npe_initchild(dev_info_t *child)
828 {
829 	char		name[80];
830 	pcie_bus_t	*bus_p;
831 	uint32_t	regs;
832 	ddi_acc_handle_t	cfg_hdl;
833 
834 	/*
835 	 * Do not bind drivers to empty bridges.
836 	 * Fail above, if the bridge is found to be hotplug capable
837 	 */
838 	if (npe_disable_empty_bridges_workaround(child) == 1)
839 		return (DDI_FAILURE);
840 
841 	if (pci_common_name_child(child, name, 80) != DDI_SUCCESS)
842 		return (DDI_FAILURE);
843 
844 	ddi_set_name_addr(child, name);
845 
846 	/*
847 	 * Pseudo nodes indicate a prototype node with per-instance
848 	 * properties to be merged into the real h/w device node.
849 	 * The interpretation of the unit-address is DD[,F]
850 	 * where DD is the device id and F is the function.
851 	 */
852 	if (ndi_dev_is_persistent_node(child) == 0) {
853 		extern int pci_allow_pseudo_children;
854 
855 		ddi_set_parent_data(child, NULL);
856 
857 		/*
858 		 * Try to merge the properties from this prototype
859 		 * node into real h/w nodes.
860 		 */
861 		if (ndi_merge_node(child, pci_common_name_child) ==
862 		    DDI_SUCCESS) {
863 			/*
864 			 * Merged ok - return failure to remove the node.
865 			 */
866 			ddi_set_name_addr(child, NULL);
867 			return (DDI_FAILURE);
868 		}
869 
870 		/* workaround for DDIVS to run under PCI Express */
871 		if (pci_allow_pseudo_children) {
872 			/*
873 			 * If the "interrupts" property doesn't exist,
874 			 * this must be the ddivs no-intr case, and it returns
875 			 * DDI_SUCCESS instead of DDI_FAILURE.
876 			 */
877 			if (ddi_prop_get_int(DDI_DEV_T_ANY, child,
878 			    DDI_PROP_DONTPASS, "interrupts", -1) == -1)
879 				return (DDI_SUCCESS);
880 			/*
881 			 * Create the ddi_parent_private_data for a pseudo
882 			 * child.
883 			 */
884 			pci_common_set_parent_private_data(child);
885 			return (DDI_SUCCESS);
886 		}
887 
888 		/*
889 		 * The child was not merged into a h/w node,
890 		 * but there's not much we can do with it other
891 		 * than return failure to cause the node to be removed.
892 		 */
893 		cmn_err(CE_WARN, "!%s@%s: %s.conf properties not merged",
894 		    ddi_get_name(child), ddi_get_name_addr(child),
895 		    ddi_get_name(child));
896 		ddi_set_name_addr(child, NULL);
897 		return (DDI_NOT_WELL_FORMED);
898 	}
899 
900 	if (ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
901 	    "interrupts", -1) != -1)
902 		pci_common_set_parent_private_data(child);
903 	else
904 		ddi_set_parent_data(child, NULL);
905 
906 	/* Disable certain errors on PCIe drivers for x86 platforms */
907 	regs = pcie_get_aer_uce_mask() | npe_aer_uce_mask;
908 	pcie_set_aer_uce_mask(regs);
909 	regs = pcie_get_aer_ce_mask() | npe_aer_ce_mask;
910 	pcie_set_aer_ce_mask(regs);
911 	regs = pcie_get_aer_suce_mask() | npe_aer_suce_mask;
912 	pcie_set_aer_suce_mask(regs);
913 
914 	/*
915 	 * If URs are disabled, mask SERRs as well, otherwise the system will
916 	 * still be notified of URs
917 	 */
918 	if (npe_aer_uce_mask & PCIE_AER_UCE_UR)
919 		pcie_set_serr_mask(1);
920 
921 	if (pci_config_setup(child, &cfg_hdl) == DDI_SUCCESS) {
922 		npe_ck804_fix_aer_ptr(cfg_hdl);
923 		npe_nvidia_error_mask(cfg_hdl);
924 		npe_intel_error_mask(cfg_hdl);
925 		pci_config_teardown(&cfg_hdl);
926 	}
927 
928 	bus_p = pcie_init_bus(child);
929 	if (bus_p) {
930 		uint16_t device_id = (uint16_t)(bus_p->bus_dev_ven_id >> 16);
931 		uint16_t vendor_id = (uint16_t)(bus_p->bus_dev_ven_id & 0xFFFF);
932 		uint16_t rev_id = bus_p->bus_rev_id;
933 
934 		/* Disable AER for certain NVIDIA Chipsets */
935 		if ((vendor_id == NVIDIA_VENDOR_ID) &&
936 		    (device_id == NVIDIA_CK804_DEVICE_ID) &&
937 		    (rev_id < NVIDIA_CK804_AER_VALID_REVID))
938 			bus_p->bus_aer_off = 0;
939 
940 		(void) pcie_initchild(child);
941 	}
942 
943 	return (DDI_SUCCESS);
944 }
945 
946 
947 static int
948 npe_removechild(dev_info_t *dip)
949 {
950 	pcie_uninitchild(dip);
951 
952 	ddi_set_name_addr(dip, NULL);
953 
954 	/*
955 	 * Strip the node to properly convert it back to prototype form
956 	 */
957 	ddi_remove_minor_node(dip, NULL);
958 
959 	ddi_prop_remove_all(dip);
960 
961 	return (DDI_SUCCESS);
962 }
963 
964 
965 /*
966  * When retrofitting this module for pci_tools, functions such as open, close,
967  * and ioctl are now pulled into this module.  Before this, the functions in
968  * the pcihp module were referenced directly.  Now they are called or
969  * referenced through the pcihp cb_ops structure from functions in this module.
970  */
971 static int
972 npe_open(dev_t *devp, int flags, int otyp, cred_t *credp)
973 {
974 	return ((pcihp_get_cb_ops())->cb_open(devp, flags, otyp, credp));
975 }
976 
977 static int
978 npe_close(dev_t dev, int flags, int otyp, cred_t *credp)
979 {
980 	return ((pcihp_get_cb_ops())->cb_close(dev, flags, otyp, credp));
981 }
982 
983 static int
984 npe_ioctl(dev_t dev, int cmd, intptr_t arg, int mode, cred_t *credp, int *rvalp)
985 {
986 	minor_t		minor = getminor(dev);
987 	int		instance = PCIHP_AP_MINOR_NUM_TO_INSTANCE(minor);
988 	pci_state_t	*pci_p = ddi_get_soft_state(npe_statep, instance);
989 	dev_info_t	*dip;
990 
991 	if (pci_p == NULL)
992 		return (ENXIO);
993 
994 	dip = pci_p->pci_dip;
995 
996 	return (pci_common_ioctl(dip, dev, cmd, arg, mode, credp, rvalp));
997 }
998 
999 static int
1000 npe_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op,
1001 	int flags, char *name, caddr_t valuep, int *lengthp)
1002 {
1003 	return ((pcihp_get_cb_ops())->cb_prop_op(dev, dip, prop_op, flags,
1004 	    name, valuep, lengthp));
1005 }
1006 
1007 static int
1008 npe_info(dev_info_t *dip, ddi_info_cmd_t cmd, void *arg, void **result)
1009 {
1010 	return (pcihp_info(dip, cmd, arg, result));
1011 }
1012 
1013 /*ARGSUSED*/
1014 static int
1015 npe_fm_init(dev_info_t *dip, dev_info_t *tdip, int cap,
1016     ddi_iblock_cookie_t *ibc)
1017 {
1018 	pci_state_t  *pcip = ddi_get_soft_state(npe_statep,
1019 	    ddi_get_instance(dip));
1020 
1021 	ASSERT(ibc != NULL);
1022 	*ibc = pcip->pci_fm_ibc;
1023 
1024 	return (pcip->pci_fmcap);
1025 }
1026 
1027 /*ARGSUSED*/
1028 static int
1029 npe_fm_callback(dev_info_t *dip, ddi_fm_error_t *derr, const void *no_used)
1030 {
1031 	/*
1032 	 * On current x86 systems, npe's callback does not get called for failed
1033 	 * loads.  If in the future this feature is used, the fault PA should be
1034 	 * logged in the derr->fme_bus_specific field.  The appropriate PCIe
1035 	 * error handling code should be called and needs to be coordinated with
1036 	 * safe access handling.
1037 	 */
1038 
1039 	return (DDI_FM_OK);
1040 }
1041