1 /* 2 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 3 * Use is subject to license terms. 4 */ 5 6 #ifndef _SYS_MPI_CNFG_H 7 #define _SYS_MPI_CNFG_H 8 9 #ifdef __cplusplus 10 extern "C" { 11 #endif 12 13 /* 14 * Config Message and Structures 15 */ 16 typedef struct config_page_header { 17 uint8_t PageVersion; 18 uint8_t PageLength; 19 uint8_t PageNumber; 20 uint8_t PageType; 21 } config_page_header_t; 22 23 typedef union config_page_header_union { 24 config_page_header_t Struct; 25 uint8_t Bytes[4]; 26 uint16_t Word16[2]; 27 uint32_t Word32; 28 } config_page_header_union_t; 29 30 /* 31 * The extended header is used for 1064 and on 32 */ 33 typedef struct config_extended_page_header { 34 uint8_t PageVersion; 35 uint8_t Reserved1; 36 uint8_t PageNumber; 37 uint8_t PageType; 38 uint16_t ExtPageLength; 39 uint8_t ExtPageType; 40 uint8_t Reserved2; 41 } config_extended_page_header_t; 42 43 /* 44 * PageType field values 45 */ 46 #define MPI_CONFIG_PAGEATTR_READ_ONLY 0x00 47 #define MPI_CONFIG_PAGEATTR_CHANGEABLE 0x10 48 #define MPI_CONFIG_PAGEATTR_PERSISTENT 0x20 49 #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT 0x30 50 #define MPI_CONFIG_PAGEATTR_MASK 0xF0 51 52 #define MPI_CONFIG_PAGETYPE_IO_UNIT 0x00 53 #define MPI_CONFIG_PAGETYPE_IOC 0x01 54 #define MPI_CONFIG_PAGETYPE_BIOS 0x02 55 #define MPI_CONFIG_PAGETYPE_SCSI_PORT 0x03 56 #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE 0x04 57 #define MPI_CONFIG_PAGETYPE_FC_PORT 0x05 58 #define MPI_CONFIG_PAGETYPE_FC_DEVICE 0x06 59 #define MPI_CONFIG_PAGETYPE_LAN 0x07 60 #define MPI_CONFIG_PAGETYPE_RAID_VOLUME 0x08 61 #define MPI_CONFIG_PAGETYPE_MANUFACTURING 0x09 62 #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK 0x0A 63 #define MPI_CONFIG_PAGETYPE_INBAND 0x0B 64 #define MPI_CONFIG_PAGETYPE_EXTENDED 0x0F 65 #define MPI_CONFIG_PAGETYPE_MASK 0x0F 66 67 #define MPI_CONFIG_TYPENUM_MASK 0x0FFF 68 69 /* 70 * ExtPageType field values 71 */ 72 #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT 0x10 73 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER 0x11 74 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE 0x12 75 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY 0x13 76 77 /* 78 * Page Address field values 79 */ 80 #define MPI_SCSI_PORT_PGAD_PORT_MASK 0x000000FF 81 82 #define MPI_SCSI_DEVICE_TARGET_ID_MASK 0x000000FF 83 #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT 0 84 #define MPI_SCSI_DEVICE_BUS_MASK 0x0000FF00 85 #define MPI_SCSI_DEVICE_BUS_SHIFT 8 86 87 #define MPI_FC_PORT_PGAD_PORT_MASK 0xF0000000 88 #define MPI_FC_PORT_PGAD_PORT_SHIFT 28 89 #define MPI_FC_PORT_PGAD_FORM_MASK 0x0F000000 90 #define MPI_FC_PORT_PGAD_FORM_INDEX 0x01000000 91 #define MPI_FC_PORT_PGAD_INDEX_MASK 0x0000FFFF 92 #define MPI_FC_PORT_PGAD_INDEX_SHIFT 0 93 94 #define MPI_FC_DEVICE_PGAD_PORT_MASK 0xF0000000 95 #define MPI_FC_DEVICE_PGAD_PORT_SHIFT 28 96 #define MPI_FC_DEVICE_PGAD_FORM_MASK 0x0F000000 97 #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID 0x00000000 98 #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK 0xF0000000 99 #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT 28 100 #define MPI_FC_DEVICE_PGAD_ND_DID_MASK 0x00FFFFFF 101 #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT 0 102 #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID 0x01000000 103 #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK 0x0000FF00 104 #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT 8 105 #define MPI_FC_DEVICE_PGAD_BT_TID_MASK 0x000000FF 106 #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT 0 107 108 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK 0x000000FF 109 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT 0 110 111 #define MPI_SAS_EXPAND_PGAD_FORM_MASK 0xF0000000 112 #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT 28 113 #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE 0x00000000 114 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM 0x00000001 115 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE 0x00000002 116 #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE 0x0000FFFF 117 #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE 0 118 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY 0x00FF0000 119 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY 16 120 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE 0x0000FFFF 121 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE 0 122 #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE 0x0000FFFF 123 #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE 0 124 125 #define MPI_SAS_DEVICE_PGAD_FORM_MASK 0xF0000000 126 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT 28 127 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE 0x00000000 128 #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID 0x00000001 129 #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE 0x00000002 130 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK 0x0000FFFF 131 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT 0 132 #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK 0x0000FF00 133 #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT 8 134 #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK 0x000000FF 135 #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT 0 136 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK 0x0000FFFF 137 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT 0 138 139 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK 0x000000FF 140 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT 0 141 142 /* 143 * Config Message 144 */ 145 typedef struct msg_config { 146 uint8_t Action; 147 uint8_t Reserved; 148 uint8_t ChainOffset; 149 uint8_t Function; 150 uint16_t ExtPageLength; /* 1064 only */ 151 uint8_t ExtPageType; /* 1064 only */ 152 uint8_t MsgFlags; 153 uint32_t MsgContext; 154 uint8_t Reserved2[8]; 155 config_page_header_t Header; 156 uint32_t PageAddress; 157 sge_io_union_t PageBufferSGE; 158 } msg_config_t; 159 160 /* 161 * Action field values 162 */ 163 #define MPI_CONFIG_ACTION_PAGE_HEADER 0x00 164 #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT 0x01 165 #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT 0x02 166 #define MPI_CONFIG_ACTION_PAGE_DEFAULT 0x03 167 #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM 0x04 168 #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT 0x05 169 #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM 0x06 170 171 /* 172 * Config Reply Message 173 */ 174 typedef struct msg_config_reply { 175 uint8_t Action; 176 uint8_t Reserved; 177 uint8_t MsgLength; 178 uint8_t Function; 179 uint16_t ExtPageLength; 180 uint8_t ExtPageType; 181 uint8_t MsgFlags; 182 uint32_t MsgContext; 183 uint8_t Reserved2[2]; 184 uint16_t IOCStatus; 185 uint32_t IOCLogInfo; 186 config_page_header_t Header; 187 } msg_config_reply_t; 188 189 /* 190 * Manufacturing Config pages 191 */ 192 #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC 0x1000 193 #define MPI_MANUFACTPAGE_DEVICEID_FC909 0x0621 194 #define MPI_MANUFACTPAGE_DEVICEID_FC919 0x0624 195 #define MPI_MANUFACTPAGE_DEVICEID_FC929 0x0622 196 #define MPI_MANUFACTPAGE_DEVICEID_FC919X 0x0628 197 #define MPI_MANUFACTPAGE_DEVICEID_FC929X 0x0626 198 #define MPI_MANUFACTPAGE_DEVID_53C1030 0x0030 199 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC 0x0031 200 #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 0x0032 201 #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 0x0033 202 #define MPI_MANUFACTPAGE_DEVID_53C1035 0x0040 203 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC 0x0041 204 #define MPI_MANUFACTPAGE_DEVID_SAS1064 0x0050 205 206 typedef struct config_page_manufacturing_0 { 207 config_page_header_t Header; 208 uint8_t ChipName[16]; 209 uint8_t ChipRevision[8]; 210 uint8_t BoardName[16]; 211 uint8_t BoardAssembly[16]; 212 uint8_t BoardTracerNumber[16]; 213 } config_page_manufacturing_0_t; 214 215 #define MPI_MANUFACTURING0_PAGEVERSION 0x00 216 217 typedef struct config_page_manufacturing_1 { 218 config_page_header_t Header; 219 uint8_t VPD[256]; 220 } config_page_manufacturing_1_t; 221 222 #define MPI_MANUFACTURING1_PAGEVERSION 0x00 223 224 typedef struct mpi_chip_revision_id { 225 uint16_t DeviceID; 226 uint8_t PCIRevisionID; 227 uint8_t Reserved; 228 } mpi_chip_revision_id_t; 229 230 /* 231 * Host code (drivers, BIOS, utilities, etc.) should leave this 232 * define set to one and check Header.PageLength at runtime. 233 */ 234 #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS 235 #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS 1 236 #endif 237 238 typedef struct config_page_manufacturing_2 { 239 config_page_header_t Header; 240 mpi_chip_revision_id_t ChipId; 241 uint32_t HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS]; 242 } config_page_manufacturing_2_t; 243 244 #define MPI_MANUFACTURING2_PAGEVERSION 0x00 245 246 /* 247 * Host code (drivers, BIOS, utilities, etc.) should leave this 248 * define set to one and check Header.PageLength at runtime. 249 */ 250 #ifndef MPI_MAN_PAGE_3_INFO_WORDS 251 #define MPI_MAN_PAGE_3_INFO_WORDS 1 252 #endif 253 254 typedef struct config_page_manufacturing_3 { 255 config_page_header_t Header; 256 mpi_chip_revision_id_t ChipId; 257 uint32_t Info[MPI_MAN_PAGE_3_INFO_WORDS]; 258 } config_page_manufacturing_3_t; 259 260 #define MPI_MANUFACTURING3_PAGEVERSION 0x00 261 262 typedef struct config_page_manufacturing_4 { 263 config_page_header_t Header; 264 uint32_t Reserved1; 265 uint8_t InfoOffset0; 266 uint8_t InfoSize0; 267 uint8_t InfoOffset1; 268 uint8_t InfoSize1; 269 uint8_t InquirySize; 270 uint8_t Flags; 271 uint16_t Reserved2; 272 uint8_t InquiryData[56]; 273 uint32_t ISVolumeSettings; 274 uint32_t IMEVolumeSettings; 275 uint32_t IMVolumeSettings; 276 } config_page_manufacturing_4_t; 277 278 #define MPI_MANUFACTURING4_PAGEVERSION 0x01 279 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA 0x01 280 281 typedef struct config_page_manufacturing_5 { 282 config_page_header_t Header; 283 uint64_t BaseWWID; 284 } config_page_manufacturing_5_t; 285 286 #define MPI_MANUFACTURING5_PAGEVERSION 0x00 287 288 typedef struct config_page_manufacturing_6 { 289 config_page_header_t Header; 290 uint32_t ProductSpecificInfo; 291 } config_page_manufacturing_6_t; 292 293 #define MPI_MANUFACTURING6_PAGEVERSION 0x00 294 295 /* 296 * IO Unit Config Pages 297 */ 298 typedef struct config_page_io_unit_0 { 299 config_page_header_t Header; 300 uint64_t UniqueValue; 301 } config_page_io_unit_0_t; 302 303 #define MPI_IOUNITPAGE0_PAGEVERSION 0x00 304 305 typedef struct config_page_io_unit_1 { 306 config_page_header_t Header; 307 uint32_t Flags; 308 } config_page_io_unit_1_t; 309 310 #define MPI_IOUNITPAGE1_PAGEVERSION 0x01 311 312 #define MPI_IOUNITPAGE1_MULTI_FUNCTION 0x00000000 313 #define MPI_IOUNITPAGE1_SINGLE_FUNCTION 0x00000001 314 #define MPI_IOUNITPAGE1_MULTI_PATHING 0x00000002 315 #define MPI_IOUNITPAGE1_SINGLE_PATHING 0x00000000 316 #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID 0x00000004 317 #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING 0x00000020 318 #define MPI_IOUNITPAGE1_DISABLE_IR 0x00000040 319 #define MPI_IOUNITPAGE1_FORCE_32 0x00000080 320 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE 0x00000100 321 322 typedef struct mpi_adapter_info { 323 uint8_t PciBusNumber; 324 uint8_t PciDeviceAndFunctionNumber; 325 uint16_t AdapterFlags; 326 } mpi_adapter_info_t; 327 328 #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED 0x0001 329 #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS 0x0002 330 331 typedef struct config_page_io_unit_2 { 332 config_page_header_t Header; 333 uint32_t Flags; 334 uint32_t BiosVersion; 335 mpi_adapter_info_t AdapterOrder[4]; 336 } config_page_io_unit_2_t; 337 338 #define MPI_IOUNITPAGE2_PAGEVERSION 0x00 339 340 #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR 0x00000002 341 #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE 0x00000004 342 #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE 0x00000008 343 #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 0x00000010 344 345 #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK 0x000000E0 346 #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY 0x00000000 347 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY 0x00000020 348 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY 0x00000040 349 350 /* 351 * Host code (drivers, BIOS, utilities, etc.) should leave this 352 * define set to one and check Header.PageLength at runtime. 353 */ 354 #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX 355 #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX 1 356 #endif 357 358 typedef struct config_page_io_unit_3 { 359 config_page_header_t Header; 360 uint8_t GPIOCount; 361 uint8_t Reserved1; 362 uint16_t Reserved2; 363 uint16_t GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; 364 } config_page_io_unit_3_t; 365 366 #define MPI_IOUNITPAGE3_PAGEVERSION 0x01 367 368 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK 0xFC 369 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT 2 370 #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF 0x00 371 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON 0x01 372 373 /* 374 * IOC Config Pages 375 */ 376 typedef struct config_page_ioc_0 { 377 config_page_header_t Header; 378 uint32_t TotalNVStore; 379 uint32_t FreeNVStore; 380 uint16_t VendorID; 381 uint16_t DeviceID; 382 uint8_t RevisionID; 383 uint8_t Reserved[3]; 384 uint32_t ClassCode; 385 uint16_t SubsystemVendorID; 386 uint16_t SubsystemID; 387 } config_page_ioc_0_t; 388 389 #define MPI_IOCPAGE0_PAGEVERSION 0x01 390 391 typedef struct config_page_ioc_1 { 392 config_page_header_t Header; 393 uint32_t Flags; 394 uint32_t CoalescingTimeout; 395 uint8_t CoalescingDepth; 396 uint8_t PCISlotNum; 397 uint8_t Reserved[2]; 398 } config_page_ioc_1_t; 399 400 #define MPI_IOCPAGE1_PAGEVERSION 0x01 401 #define MPI_IOCPAGE1_EEDP_HOST_SUPPORTS_DIF 0x08000000 402 #define MPI_IOCPAGE1_EEDP_MODE_MASK 0x07000000 403 #define MPI_IOCPAGE1_EEDP_MODE_OFF 0x00000000 404 #define MPI_IOCPAGE1_EEDP_MODE_T10 0x01000000 405 #define MPI_IOCPAGE1_EEDP_MODE_LSI_1 0x02000000 406 #define MPI_IOCPAGE1_EEDP_MODE_LSI_2 0x03000000 407 #define MPI_IOCPAGE1_REPLY_COALESCING 0x00000001 408 #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN 0xFF 409 410 typedef struct config_page_ioc_2_raid_vol { 411 uint8_t VolumeID; 412 uint8_t VolumeBus; 413 uint8_t VolumeIOC; 414 uint8_t VolumePageNumber; 415 uint8_t VolumeType; 416 uint8_t Flags; 417 uint16_t Reserved3; 418 } config_page_ioc_2_raid_vol_t; 419 420 #define MPI_RAID_VOL_TYPE_IS 0x00 421 #define MPI_RAID_VOL_TYPE_IME 0x01 422 #define MPI_RAID_VOL_TYPE_IM 0x02 423 #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE 0x08 424 425 /* 426 * Host code (drivers, BIOS, utilities, etc.) should leave this 427 * define set to one and check Header.PageLength at runtime. 428 */ 429 #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX 430 #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX 1 431 #endif 432 433 typedef struct config_page_ioc_2 { 434 config_page_header_t Header; 435 uint32_t CapabilitiesFlags; 436 uint8_t NumActiveVolumes; 437 uint8_t MaxVolumes; 438 uint8_t NumActivePhysDisks; 439 uint8_t MaxPhysDisks; 440 config_page_ioc_2_raid_vol_t RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX]; 441 } config_page_ioc_2_t; 442 443 #define MPI_IOCPAGE2_PAGEVERSION 0x02 444 445 /* 446 * IOC Page 2 Capabilities flags 447 */ 448 #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT 0x00000001 449 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT 0x00000002 450 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT 0x00000004 451 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT 0x20000000 452 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT 0x40000000 453 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT 0x80000000 454 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING 0x10000000 455 456 typedef struct ioc_3_phys_disk { 457 uint8_t PhysDiskID; 458 uint8_t PhysDiskBus; 459 uint8_t PhysDiskIOC; 460 uint8_t PhysDiskNum; 461 } ioc_3_phys_disk_t; 462 463 /* 464 * Host code (drivers, BIOS, utilities, etc.) should leave this 465 * define set to one and check Header.PageLength at runtime. 466 */ 467 #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX 468 #define MPI_IOC_PAGE_3_PHYSDISK_MAX 1 469 #endif 470 471 typedef struct config_page_ioc_3 { 472 config_page_header_t Header; 473 uint8_t NumPhysDisks; 474 uint8_t Reserved1; 475 uint16_t Reserved2; 476 ioc_3_phys_disk_t PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; 477 } config_page_ioc_3_t; 478 479 #define MPI_IOCPAGE3_PAGEVERSION 0x00 480 481 typedef struct ioc_4_sep { 482 uint8_t SEPTargetID; 483 uint8_t SEPBus; 484 uint16_t Reserved; 485 } ioc_4_sep_t; 486 487 /* 488 * Host code (drivers, BIOS, utilities, etc.) should leave this 489 * define set to one and check Header.PageLength at runtime. 490 */ 491 #ifndef MPI_IOC_PAGE_4_SEP_MAX 492 #define MPI_IOC_PAGE_4_SEP_MAX 1 493 #endif 494 495 typedef struct config_page_ioc_4 { 496 config_page_header_t Header; 497 uint8_t ActiveSEP; 498 uint8_t MaxSEP; 499 uint16_t Reserved1; 500 ioc_4_sep_t SEP[MPI_IOC_PAGE_4_SEP_MAX]; 501 } config_page_ioc_4_t; 502 503 #define MPI_IOCPAGE4_PAGEVERSION 0x00 504 505 /* 506 * SCSI Port Config Pages 507 */ 508 typedef struct config_page_scsi_port_0 { 509 config_page_header_t Header; 510 uint32_t Capabilities; 511 uint32_t PhysicalInterface; 512 } config_page_scsi_port_0_t; 513 514 #define MPI_SCSIPORTPAGE0_PAGEVERSION 0x01 515 516 /* 517 * Capabilities 518 */ 519 #define MPI_SCSIPORTPAGE0_CAP_IU 0x00000001 520 #define MPI_SCSIPORTPAGE0_CAP_DT 0x00000002 521 #define MPI_SCSIPORTPAGE0_CAP_QAS 0x00000004 522 #define MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS 0x00000008 523 #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK 0x0000FF00 524 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK 0x00FF0000 525 #define MPI_SCSIPORTPAGE0_CAP_WIDE 0x20000000 526 #define MPI_SCSIPORTPAGE0_CAP_AIP 0x80000000 527 528 /* 529 * Physical Interface 530 */ 531 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK 0x00000003 532 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD 0x01 533 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE 0x02 534 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD 0x03 535 536 typedef struct config_page_scsi_port_1 { 537 config_page_header_t Header; 538 uint32_t Configuration; 539 uint32_t OnBusTimerValue; 540 } config_page_scsi_port_1_t; 541 542 #define MPI_SCSIPORTPAGE1_PAGEVERSION 0x02 543 544 #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK 0x000000FF 545 #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK 0xFFFF0000 546 547 typedef struct mpi_device_info { 548 uint8_t Timeout; 549 uint8_t SyncFactor; 550 uint16_t DeviceFlags; 551 } mpi_device_info_t; 552 553 typedef struct config_page_scsi_port_2 { 554 config_page_header_t Header; 555 uint32_t PortFlags; 556 uint32_t PortSettings; 557 mpi_device_info_t DeviceSettings[16]; 558 } config_page_scsi_port_2_t; 559 560 #define MPI_SCSIPORTPAGE2_PAGEVERSION 0x01 561 562 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW 0x00000001 563 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET 0x00000004 564 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS 0x00000008 565 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE 0x00000010 566 567 #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK 0x0000000F 568 #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA 0x00000030 569 #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA 0x00000000 570 #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA 0x00000010 571 #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA 0x00000020 572 #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA 0x00000030 573 #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA 0x000000C0 574 #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK 0x00000F00 575 #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS 0x00003000 576 #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS 0x00000000 577 #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS 0x00001000 578 #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS 0x00003000 579 580 #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE 0x0001 581 #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE 0x0002 582 #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE 0x0004 583 #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE 0x0008 584 #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE 0x0010 585 #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE 0x0020 586 587 /* 588 * SCSI Target Device Config Pages 589 */ 590 typedef struct config_page_scsi_device_0 { 591 config_page_header_t Header; 592 uint32_t NegotiatedParameters; 593 uint32_t Information; 594 } config_page_scsi_device_0_t; 595 596 #define MPI_SCSIDEVPAGE0_PAGEVERSION 0x02 597 598 #define MPI_SCSIDEVPAGE0_NP_IU 0x00000001 599 #define MPI_SCSIDEVPAGE0_NP_DT 0x00000002 600 #define MPI_SCSIDEVPAGE0_NP_QAS 0x00000004 601 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK 0x0000FF00 602 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK 0x00FF0000 603 #define MPI_SCSIDEVPAGE0_NP_WIDE 0x20000000 604 #define MPI_SCSIDEVPAGE0_NP_AIP 0x80000000 605 #define MPI_SCSIDEVPAGE0_NP_IDP 0x08000000 606 607 #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED 0x00000001 608 #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED 0x00000002 609 #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED 0x00000004 610 #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED 0x00000008 611 612 typedef struct config_page_scsi_device_1 { 613 config_page_header_t Header; 614 uint32_t RequestedParameters; 615 uint32_t Reserved; 616 uint32_t Configuration; 617 } config_page_scsi_device_1_t; 618 619 #define MPI_SCSIDEVPAGE1_PAGEVERSION 0x03 620 621 #define MPI_SCSIDEVPAGE1_RP_IU 0x00000001 622 #define MPI_SCSIDEVPAGE1_RP_DT 0x00000002 623 #define MPI_SCSIDEVPAGE1_RP_QAS 0x00000004 624 #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK 0x0000FF00 625 #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK 0x00FF0000 626 #define MPI_SCSIDEVPAGE1_RP_WIDE 0x20000000 627 #define MPI_SCSIDEVPAGE1_RP_AIP 0x80000000 628 #define MPI_SCSIDEVPAGE1_RP_IDP 0x08000000 629 630 #define MPI_SCSIDEVPAGE1_DV_LVD_DRIVE_STRENGTH_MASK 0x00000003 631 #define MPI_SCSIDEVPAGE1_DV_SE_SLEW_RATE_MASK 0x00000300 632 633 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED 0x00000002 634 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED 0x00000004 635 636 typedef struct config_page_scsi_device_2 { 637 config_page_header_t Header; 638 uint32_t DomainValidation; 639 uint32_t ParityPipeSelect; 640 uint32_t DataPipeSelect; 641 } config_page_scsi_device_2_t; 642 643 #define MPI_SCSIDEVPAGE2_PAGEVERSION 0x00 644 645 #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE 0x00000010 646 #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE 0x00000020 647 #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL 0x00000380 648 #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL 0x00001C00 649 #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL 0x0000E000 650 #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST 0x10000000 651 #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST 0x20000000 652 #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT 0x40000000 653 #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT 0x80000000 654 655 #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK 0x00000003 656 657 #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK 0x00000003 658 #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK 0x0000000C 659 #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK 0x00000030 660 #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK 0x000000C0 661 #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK 0x00000300 662 #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK 0x00000C00 663 #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK 0x00003000 664 #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK 0x0000C000 665 #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK 0x00030000 666 #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK 0x000C0000 667 #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK 0x00300000 668 #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK 0x00C00000 669 #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK 0x03000000 670 #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK 0x0C000000 671 #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK 0x30000000 672 #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK 0xC0000000 673 674 /* 675 * FC Port Config Pages 676 */ 677 typedef struct config_page_fc_port_0 { 678 config_page_header_t Header; 679 uint32_t Flags; 680 uint8_t MPIPortNumber; 681 uint8_t Reserved[3]; 682 uint32_t PortIdentifier; 683 uint64_t WWNN; 684 uint64_t WWPN; 685 uint32_t SupportedServiceClass; 686 uint32_t SupportedSpeeds; 687 uint32_t CurrentSpeed; 688 uint32_t MaxFrameSize; 689 uint64_t FabricWWNN; 690 uint64_t FabricWWPN; 691 uint32_t DiscoveredPortsCount; 692 uint32_t MaxInitiators; 693 } config_page_fc_port_0_t; 694 695 #define MPI_FCPORTPAGE0_PAGEVERSION 0x01 696 697 #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK 0x0000000F 698 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT \ 699 MPI_PORTFACTS_PROTOCOL_INITIATOR 700 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG \ 701 MPI_PORTFACTS_PROTOCOL_TARGET 702 #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN \ 703 MPI_PORTFACTS_PROTOCOL_LAN 704 #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR \ 705 MPI_PORTFACTS_PROTOCOL_LOGBUSADDR 706 707 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED 0x00000010 708 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED 0x00000020 709 #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID 0x00000030 710 711 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK 0x00000F00 712 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT 0x00000000 713 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT 0x00000100 714 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP 0x00000200 715 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT 0x00000400 716 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP 0x00000800 717 718 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK 0x00000F00 719 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT 0x00000000 720 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT 0x00000100 721 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP 0x00000200 722 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT 0x00000400 723 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP 0x00000800 724 725 #define MPI_FCPORTPAGE0_LTYPE_RESERVED 0x00 726 #define MPI_FCPORTPAGE0_LTYPE_OTHER 0x01 727 #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN 0x02 728 #define MPI_FCPORTPAGE0_LTYPE_COPPER 0x03 729 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 0x04 730 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 0x05 731 #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI 0x06 732 #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI 0x07 733 #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI 0x08 734 #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI 0x09 735 #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE 0x0A 736 #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE 0x0B 737 #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE 0x0C 738 #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE 0x0D 739 #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE 0x0E 740 #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE 0x0F 741 742 #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN 0x01 743 #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE 0x02 744 #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE 0x03 745 #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED 0x04 746 #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST 0x05 747 #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN 0x06 748 #define MPI_FCPORTPAGE0_PORTSTATE_ERROR 0x07 749 #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK 0x08 750 751 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 0x00000001 752 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 0x00000002 753 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 0x00000004 754 755 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED 0x00000001 756 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED 0x00000002 757 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED 0x00000004 758 759 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT \ 760 MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED 761 #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT \ 762 MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED 763 #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT \ 764 MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED 765 766 typedef struct config_page_fc_port_1 { 767 config_page_header_t Header; 768 uint32_t Flags; 769 uint64_t NoSEEPROMWWNN; 770 uint64_t NoSEEPROMWWPN; 771 uint8_t HardALPA; 772 uint8_t LinkConfig; 773 uint8_t TopologyConfig; 774 uint8_t Reserved; 775 } config_page_fc_port_1_t; 776 777 #define MPI_FCPORTPAGE1_PAGEVERSION 0x02 778 779 #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN 0x08000000 780 #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY 0x04000000 781 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID 0x00000001 782 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN 0x00000000 783 784 /* 785 * Flags used for programming protocol modes in NVStore 786 */ 787 #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK 0xF0000000 788 #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT 28 789 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT \ 790 ((uint32_t)MPI_PORTFACTS_PROTOCOL_INITIATOR << \ 791 MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 792 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG \ 793 ((uint32_t)MPI_PORTFACTS_PROTOCOL_TARGET << \ 794 MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 795 #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN \ 796 ((uint32_t)MPI_PORTFACTS_PROTOCOL_LAN << \ 797 MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 798 #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR \ 799 ((uint32_t)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << \ 800 MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 801 802 #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED 0xFF 803 804 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK 0x0F 805 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG 0x00 806 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG 0x01 807 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG 0x02 808 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG 0x03 809 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO 0x0F 810 811 #define MPI_FCPORTPAGE1_TOPOLOGY_MASK 0x0F 812 #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT 0x01 813 #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT 0x02 814 #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO 0x0F 815 816 typedef struct config_page_fc_port_2 { 817 config_page_header_t Header; 818 uint8_t NumberActive; 819 uint8_t ALPA[127]; 820 } config_page_fc_port_2_t; 821 822 #define MPI_FCPORTPAGE2_PAGEVERSION 0x01 823 824 typedef struct wwn_format { 825 uint64_t WWNN; 826 uint64_t WWPN; 827 } wwn_format_t; 828 829 typedef union fc_port_persistent_physical_id { 830 wwn_format_t WWN; 831 uint32_t Did; 832 } fc_port_persistent_physical_id_t; 833 834 typedef struct fc_port_persistent { 835 fc_port_persistent_physical_id_t PhysicalIdentifier; 836 uint8_t TargetID; 837 uint8_t Bus; 838 uint16_t Flags; 839 } fc_port_persistent_t; 840 841 #define MPI_PERSISTENT_FLAGS_SHIFT 16 842 #define MPI_PERSISTENT_FLAGS_ENTRY_VALID 0x0001 843 #define MPI_PERSISTENT_FLAGS_SCAN_ID 0x0002 844 #define MPI_PERSISTENT_FLAGS_SCAN_LUNS 0x0004 845 #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE 0x0008 846 #define MPI_PERSISTENT_FLAGS_BY_DID 0x0080 847 848 /* 849 * Host code (drivers, BIOS, utilities, etc.) should leave this 850 * define set to one and check Header.PageLength at runtime. 851 */ 852 #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX 853 #define MPI_FC_PORT_PAGE_3_ENTRY_MAX 1 854 #endif 855 856 typedef struct config_page_fc_port_3 { 857 config_page_header_t Header; 858 fc_port_persistent_t Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; 859 } config_page_fc_port_3_t; 860 861 #define MPI_FCPORTPAGE3_PAGEVERSION 0x01 862 863 typedef struct config_page_fc_port_4 { 864 config_page_header_t Header; 865 uint32_t PortFlags; 866 uint32_t PortSettings; 867 } config_page_fc_port_4_t; 868 869 #define MPI_FCPORTPAGE4_PAGEVERSION 0x00 870 871 #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS 0x00000008 872 873 #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA 0x00000030 874 #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA 0x00000000 875 #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA 0x00000010 876 #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA 0x00000020 877 #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA 0x00000030 878 #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA 0x000000C0 879 #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK 0x00000F00 880 881 typedef struct config_page_fc_port_5_alias_info { 882 uint8_t Flags; 883 uint8_t AliasAlpa; 884 uint16_t Reserved; 885 uint64_t AliasWWNN; 886 uint64_t AliasWWPN; 887 } config_page_fc_port_5_alias_info_t; 888 889 /* 890 * Host code (drivers, BIOS, utilities, etc.) should leave this 891 * define set to one and check Header.PageLength at runtime. 892 */ 893 #ifndef MPI_FC_PORT_PAGE_5_ALIAS_MAX 894 #define MPI_FC_PORT_PAGE_5_ALIAS_MAX 1 895 #endif 896 897 typedef struct config_page_fc_port_5 { 898 config_page_header_t Header; 899 config_page_fc_port_5_alias_info_t 900 AliasInfo[MPI_FC_PORT_PAGE_5_ALIAS_MAX]; 901 } config_page_fc_port_5_t; 902 903 #define MPI_FCPORTPAGE5_PAGEVERSION 0x00 904 905 #define MPI_FCPORTPAGE5_FLAGS_ALIAS_ALPA_VALID 0x01 906 #define MPI_FCPORTPAGE5_FLAGS_ALIAS_WWN_VALID 0x02 907 908 typedef struct config_page_fc_port_6 { 909 config_page_header_t Header; 910 uint32_t Reserved; 911 uint64_t TimeSinceReset; 912 uint64_t TxFrames; 913 uint64_t RxFrames; 914 uint64_t TxWords; 915 uint64_t RxWords; 916 uint64_t LipCount; 917 uint64_t NosCount; 918 uint64_t ErrorFrames; 919 uint64_t DumpedFrames; 920 uint64_t LinkFailureCount; 921 uint64_t LossOfSyncCount; 922 uint64_t LossOfSignalCount; 923 uint64_t PrimativeSeqErrCount; 924 uint64_t InvalidTxWordCount; 925 uint64_t InvalidCrcCount; 926 uint64_t FcpInitiatorIoCount; 927 } config_page_fc_port_6_t; 928 929 #define MPI_FCPORTPAGE6_PAGEVERSION 0x00 930 931 typedef struct config_page_fc_port_7 { 932 config_page_header_t Header; 933 uint32_t Reserved; 934 uint8_t PortSymbolicName[256]; 935 } config_page_fc_port_7_t; 936 937 #define MPI_FCPORTPAGE7_PAGEVERSION 0x00 938 939 typedef struct config_page_fc_port_8 { 940 config_page_header_t Header; 941 uint32_t BitVector[8]; 942 } config_page_fc_port_8_t; 943 944 #define MPI_FCPORTPAGE8_PAGEVERSION 0x00 945 946 typedef struct config_page_fc_port_9 { 947 config_page_header_t Header; 948 uint32_t Reserved; 949 uint64_t GlobalWWPN; 950 uint64_t GlobalWWNN; 951 uint32_t UnitType; 952 uint32_t PhysicalPortNumber; 953 uint32_t NumAttachedNodes; 954 uint16_t IPVersion; 955 uint16_t UDPPortNumber; 956 uint8_t IPAddress[16]; 957 uint16_t Reserved1; 958 uint16_t TopologyDiscoveryFlags; 959 } config_page_fc_port_9_t; 960 961 #define MPI_FCPORTPAGE9_PAGEVERSION 0x00 962 963 /* 964 * FC Device Config Pages 965 */ 966 typedef struct config_page_fc_device_0 { 967 config_page_header_t Header; 968 uint64_t WWNN; 969 uint64_t WWPN; 970 uint32_t PortIdentifier; 971 uint8_t Protocol; 972 uint8_t Flags; 973 uint16_t BBCredit; 974 uint16_t MaxRxFrameSize; 975 uint8_t Reserved1; 976 uint8_t PortNumber; 977 uint8_t FcPhLowestVersion; 978 uint8_t FcPhHighestVersion; 979 uint8_t CurrentTargetID; 980 uint8_t CurrentBus; 981 } config_page_fc_device_0_t; 982 983 #define MPI_FC_DEVICE_PAGE_0_PAGEVERSION 0x02 984 985 #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID 0x01 986 987 #define MPI_FC_DEVICE_PAGE_0_PROT_IP 0x01 988 #define MPI_FC_DEVICE_PAGE_0_PROT_FCP_TARGET 0x02 989 #define MPI_FC_DEVICE_PAGE_0_PROT_FCP_INITIATOR 0x04 990 991 #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK \ 992 (MPI_FC_DEVICE_PGAD_PORT_MASK) 993 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK \ 994 (MPI_FC_DEVICE_PGAD_FORM_MASK) 995 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID \ 996 (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 997 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID \ 998 (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) 999 #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK \ 1000 (MPI_FC_DEVICE_PGAD_ND_DID_MASK) 1001 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK \ 1002 (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) 1003 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT \ 1004 (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) 1005 #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK \ 1006 (MPI_FC_DEVICE_PGAD_BT_TID_MASK) 1007 1008 /* 1009 * RAID Volume Config Pages 1010 */ 1011 typedef struct raid_vol0_phys_disk { 1012 uint16_t Reserved; 1013 uint8_t PhysDiskMap; 1014 uint8_t PhysDiskNum; 1015 } raid_vol0_phys_disk_t; 1016 1017 #define MPI_RAIDVOL0_PHYSDISK_PRIMARY 0x01 1018 #define MPI_RAIDVOL0_PHYSDISK_SECONDARY 0x02 1019 1020 typedef struct raid_vol0_status { 1021 uint8_t Flags; 1022 uint8_t State; 1023 uint16_t Reserved; 1024 } raid_vol0_status_t; 1025 1026 /* 1027 * RAID Volume Page 0 VolumeStatus defines 1028 */ 1029 #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED 0x01 1030 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED 0x02 1031 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS 0x04 1032 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE 0x08 1033 1034 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL 0x00 1035 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED 0x01 1036 #define MPI_RAIDVOL0_STATUS_STATE_FAILED 0x02 1037 #define MPI_RAIDVOL0_STATUS_STATE_MISSING 0x03 1038 1039 typedef struct raid_vol0_settings { 1040 uint16_t Settings; 1041 uint8_t HotSparePool; 1042 uint8_t Reserved; 1043 } raid_vol0_settings_t; 1044 1045 /* 1046 * RAID Volume Page 0 VolumeSettings defines 1047 */ 1048 #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE 0x0001 1049 #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART 0x0002 1050 #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE 0x0004 1051 #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC 0x0008 1052 #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE 0x00C0 1053 #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE 0x0000 1054 #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE 0x0040 1055 #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX 0x0010 1056 #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS 0x8000 1057 1058 /* 1059 * RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk 1060 */ 1061 #define MPI_RAID_HOT_SPARE_POOL_0 0x01 1062 #define MPI_RAID_HOT_SPARE_POOL_1 0x02 1063 #define MPI_RAID_HOT_SPARE_POOL_2 0x04 1064 #define MPI_RAID_HOT_SPARE_POOL_3 0x08 1065 #define MPI_RAID_HOT_SPARE_POOL_4 0x10 1066 #define MPI_RAID_HOT_SPARE_POOL_5 0x20 1067 #define MPI_RAID_HOT_SPARE_POOL_6 0x40 1068 #define MPI_RAID_HOT_SPARE_POOL_7 0x80 1069 1070 /* 1071 * Host code (drivers, BIOS, utilities, etc.) should leave this 1072 * define set to one and check Header.PageLength at runtime. 1073 */ 1074 #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX 1075 #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX 1 1076 #endif 1077 1078 typedef struct config_page_raid_vol_0 { 1079 config_page_header_t Header; 1080 uint8_t VolumeID; 1081 uint8_t VolumeBus; 1082 uint8_t VolumeIOC; 1083 uint8_t VolumeType; 1084 raid_vol0_status_t VolumeStatus; 1085 raid_vol0_settings_t VolumeSettings; 1086 uint32_t MaxLBA; 1087 uint32_t MaxLBAHigh; 1088 uint32_t StripeSize; 1089 uint32_t Reserved2; 1090 uint32_t Reserved3; 1091 uint8_t NumPhysDisks; 1092 uint8_t Reserved4; 1093 uint8_t ResyncRate; 1094 uint8_t Reserved5; 1095 raid_vol0_phys_disk_t PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX]; 1096 } config_page_raid_vol_0_t; 1097 1098 #define MPI_RAIDVOLPAGE0_PAGEVERSION 0x00 1099 1100 typedef struct config_page_raid_vol_1 1101 { 1102 config_page_header_t Header; /* 00h */ 1103 uint8_t VolumeID; /* 04h */ 1104 uint8_t VolumeBus; /* 05h */ 1105 uint8_t VolumeIOC; /* 06h */ 1106 uint8_t Reserved0; /* 07h */ 1107 uint8_t GUID[24]; /* 08h */ 1108 uint8_t Name[32]; /* 20h */ 1109 uint64_t WWID; /* 40h */ 1110 uint8_t Reserved1; /* 48h */ 1111 uint8_t Reserved2; /* 4Ch */ 1112 } config_page_raid_vol_1_t; 1113 1114 #define MPI_RAIDVOLPAGE1_PAGEVERSION 0x01 1115 1116 /* 1117 * RAID Physical Disk Config Pages 1118 */ 1119 typedef struct raid_phys_disk0_error_data { 1120 uint8_t ErrorCdbByte; 1121 uint8_t ErrorSenseKey; 1122 uint16_t Reserved; 1123 uint16_t ErrorCount; 1124 uint8_t ErrorASC; 1125 uint8_t ErrorASCQ; 1126 uint16_t SmartCount; 1127 uint8_t SmartASC; 1128 uint8_t SmartASCQ; 1129 } raid_phys_disk0_error_data_t; 1130 1131 typedef struct raid_phys_disk_inquiry_data { 1132 uint8_t VendorID[8]; 1133 uint8_t ProductID[16]; 1134 uint8_t ProductRevLevel[4]; 1135 uint8_t Info[32]; 1136 } raid_phys_disk0_inquiry_data_t; 1137 1138 typedef struct raid_phys_disk0_settings { 1139 uint8_t SepID; 1140 uint8_t SepBus; 1141 uint8_t HotSparePool; 1142 uint8_t PhysDiskSettings; 1143 } raid_phys_disk0_settings_t; 1144 1145 typedef struct raid_phys_disk0_status { 1146 uint8_t Flags; 1147 uint8_t State; 1148 uint16_t Reserved; 1149 } raid_phys_disk0_status_t; 1150 1151 /* 1152 * RAID Volume 2 IM Physical Disk DiskStatus flags 1153 */ 1154 #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC 0x01 1155 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED 0x02 1156 1157 #define MPI_PHYSDISK0_STATUS_ONLINE 0x00 1158 #define MPI_PHYSDISK0_STATUS_MISSING 0x01 1159 #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE 0x02 1160 #define MPI_PHYSDISK0_STATUS_FAILED 0x03 1161 #define MPI_PHYSDISK0_STATUS_INITIALIZING 0x04 1162 #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED 0x05 1163 #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED 0x06 1164 #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE 0xFF 1165 1166 typedef struct config_page_raid_phys_disk_0 { 1167 config_page_header_t Header; 1168 uint8_t PhysDiskID; 1169 uint8_t PhysDiskBus; 1170 uint8_t PhysDiskIOC; 1171 uint8_t PhysDiskNum; 1172 raid_phys_disk0_settings_t PhysDiskSettings; 1173 uint32_t Reserved1; 1174 uint32_t Reserved2; 1175 uint32_t Reserved3; 1176 uint8_t DiskIdentifier[16]; 1177 raid_phys_disk0_inquiry_data_t InquiryData; 1178 raid_phys_disk0_status_t PhysDiskStatus; 1179 uint32_t MaxLBA; 1180 raid_phys_disk0_error_data_t ErrorData; 1181 } config_page_raid_phys_disk_0_t; 1182 1183 #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION 0x00 1184 1185 typedef struct raid_phys_disk1_path { 1186 uint8_t PhysDiskID; 1187 uint8_t PhysDiskBus; 1188 uint16_t Reserved1; 1189 uint64_t WWID; 1190 uint64_t OwnerWWID; 1191 uint8_t OwnerIdentifier; 1192 uint8_t Reserved2; 1193 uint16_t Flags; 1194 } raid_phys_disk1_path_t; 1195 1196 /* RAID Physical Disk Page 1 Flags field defines */ 1197 1198 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN 0x0002 1199 #define MPI_RAID_PHYSDISK1_FLAG_INVALID 0x0001 1200 1201 #ifndef MPI_RAID_PHYS_DISK1_PATH_MAX 1202 #define MPI_RAID_PHYS_DISK1_PATH_MAX 1 1203 #endif 1204 1205 typedef struct config_page_raid_phys_disk_1 { 1206 config_page_header_t Header; 1207 uint8_t NumPhysDiskPaths; 1208 uint8_t PhysDiskNum; 1209 uint16_t Reserved2; 1210 uint32_t Reserved1; 1211 raid_phys_disk1_path_t Path[MPI_RAID_PHYS_DISK1_PATH_MAX]; 1212 } config_page_raid_phys_disk_1_t; 1213 1214 #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION 0x01 1215 /* 1216 * LAN Config Pages 1217 */ 1218 typedef struct config_page_lan_0 { 1219 config_page_header_t Header; 1220 uint16_t TxRxModes; 1221 uint16_t Reserved; 1222 uint32_t PacketPrePad; 1223 } config_page_lan_0_t; 1224 1225 #define MPI_LAN_PAGE0_PAGEVERSION 0x01 1226 1227 #define MPI_LAN_PAGE0_RETURN_LOOPBACK 0x0000 1228 #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK 0x0001 1229 #define MPI_LAN_PAGE0_LOOPBACK_MASK 0x0001 1230 1231 typedef struct config_page_lan_1 { 1232 config_page_header_t Header; 1233 uint16_t Reserved; 1234 uint8_t CurrentDeviceState; 1235 uint8_t Reserved1; 1236 uint32_t MinPacketSize; 1237 uint32_t MaxPacketSize; 1238 uint32_t HardwareAddressLow; 1239 uint32_t HardwareAddressHigh; 1240 uint32_t MaxWireSpeedLow; 1241 uint32_t MaxWireSpeedHigh; 1242 uint32_t BucketsRemaining; 1243 uint32_t MaxReplySize; 1244 uint32_t NegWireSpeedLow; 1245 uint32_t NegWireSpeedHigh; 1246 } config_page_lan_1_t; 1247 1248 #define MPI_LAN_PAGE1_PAGEVERSION 0x03 1249 1250 #define MPI_LAN_PAGE1_DEV_STATE_RESET 0x00 1251 #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL 0x01 1252 1253 /* 1254 * Inband config pages 1255 */ 1256 typedef struct config_page_inband_0 { 1257 config_page_header_t Header; 1258 mpi_version_format_t InbandVersion; 1259 uint16_t MaximumBuffers; 1260 uint16_t Reserved1; 1261 } config_page_inband_0_t; 1262 1263 /* 1264 * SAS IO Unit config pages 1265 */ 1266 typedef struct mpi_sas_io_unit0_phy_data { 1267 uint8_t Port; 1268 uint8_t PortFlags; 1269 uint8_t PhyFlags; 1270 uint8_t NegotiatedLinkRate; 1271 uint32_t ControllerPhyDeviceInfo; 1272 uint16_t AttachedDeviceHandle; 1273 uint16_t ControllerDevHandle; 1274 uint32_t Reserved2; 1275 } mpi_sas_io_unit0_phy_data_t; 1276 1277 /* 1278 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1279 * one and check Header.PageLength at runtime. 1280 */ 1281 #ifndef MPI_SAS_IOUNIT0_PHY_MAX 1282 #define MPI_SAS_IOUNIT0_PHY_MAX 1 1283 #endif 1284 1285 typedef struct config_page_sas_io_unit_0 { 1286 config_extended_page_header_t Header; 1287 uint16_t NvdataVersionDefault; 1288 uint16_t NvdataVersionPersistent; 1289 uint8_t NumPhys; 1290 uint8_t Reserved2; 1291 uint16_t Reserved3; 1292 mpi_sas_io_unit0_phy_data_t PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; 1293 } config_page_sas_io_unit_0_t; 1294 1295 #define MPI_SASIOUNITPAGE0_PAGEVERSION 0x00 1296 1297 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS 0x08 1298 #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM 0x00 1299 #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM 0x04 1300 #define MPI_SAS_IOUNIT0_PORT_FLAGS_WAIT_FOR_PORTENABLE 0x02 1301 #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG 0x01 1302 1303 #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED 0x04 1304 #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT 0x02 1305 #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT 0x01 1306 1307 #define MPI_SAS_IOUNIT0_RATE_UNKNOWN 0x00 1308 #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED 0x01 1309 #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION 0x02 1310 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE 0x03 1311 #define MPI_SAS_IOUNIT0_RATE_1_5 0x08 1312 #define MPI_SAS_IOUNIT0_RATE_3_0 0x09 1313 1314 typedef struct mpi_sas_io_unit1_phy_data { 1315 uint8_t Port; 1316 uint8_t PortFlags; 1317 uint8_t PhyFlags; 1318 uint8_t MaxMinLinkRate; 1319 uint32_t ControllerPhyDeviceInfo; 1320 uint32_t Reserved1; 1321 } mpi_sas_io_unit1_phy_data_t; 1322 1323 /* 1324 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1325 * one and check Header.PageLength at runtime. 1326 */ 1327 #ifndef MPI_SAS_IOUNIT1_PHY_MAX 1328 #define MPI_SAS_IOUNIT1_PHY_MAX 1 1329 #endif 1330 1331 typedef struct config_page_sas_io_unit_1 { 1332 config_extended_page_header_t Header; 1333 uint16_t ControlFlags; 1334 uint16_t MaxNumSATATargets; 1335 uint16_t AdditionalControlFlags; 1336 uint16_t Reserved1; 1337 uint8_t NumPhys; 1338 uint8_t SATAMaxQDepth; 1339 uint8_t ReportMissingDeviceDelay; 1340 uint8_t IODeviceMissingDelay; 1341 mpi_sas_io_unit1_phy_data_t PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; 1342 } config_page_sas_io_unit_1_t; 1343 1344 #define MPI_SASIOUNITPAGE1_PAGEVERSION 0x00 1345 1346 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM 0x00 1347 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM 0x04 1348 #define MPI_SAS_IOUNIT1_PORT_FLAGS_WAIT_FOR_PORTENABLE 0x02 1349 #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG 0x01 1350 1351 #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE 0x04 1352 #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT 0x02 1353 #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT 0x01 1354 1355 #define MPI_SAS_IOUNIT1_MAX_RATE_MASK 0xF0 1356 #define MPI_SAS_IOUNIT1_MAX_RATE_1_5 0x80 1357 #define MPI_SAS_IOUNIT1_MAX_RATE_3_0 0x90 1358 #define MPI_SAS_IOUNIT1_MIN_RATE_MASK 0x0F 1359 #define MPI_SAS_IOUNIT1_MIN_RATE_1_5 0x08 1360 #define MPI_SAS_IOUNIT1_MIN_RATE_3_0 0x09 1361 1362 typedef struct config_page_sas_io_unit_2 { 1363 config_extended_page_header_t Header; 1364 uint32_t Reserved1; 1365 uint16_t MaxPersistentIDs; 1366 uint16_t NumPersistentIDsUsed; 1367 uint8_t Status; 1368 uint8_t Flags; 1369 uint16_t Reserved2; 1370 } config_page_sas_io_unit_2_t; 1371 1372 #define MPI_SASIOUNITPAGE2_PAGEVERSION 0x00 1373 1374 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS 0x02 1375 #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS 0x01 1376 1377 #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS 0x01 1378 1379 #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE 0x0E 1380 #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE 1 1381 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP 0x00 1382 #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP 0x01 1383 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP 0x02 1384 #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP 0x07 1385 1386 typedef struct config_page_sas_io_unit_3 { 1387 config_extended_page_header_t Header; 1388 uint32_t Reserved1; 1389 uint32_t MaxInvalidDwordCount; 1390 uint32_t InvalidDwordCountTime; 1391 uint32_t MaxRunningDisparityErrorCount; 1392 uint32_t RunningDisparityErrorTime; 1393 uint32_t MaxLossDwordSynchCount; 1394 uint32_t LossDwordSynchCountTime; 1395 uint32_t MaxPhyResetProblemCount; 1396 uint32_t PhyResetProblemTime; 1397 } config_page_sas_io_unit_3_t; 1398 1399 #define MPI_SASIOUNITPAGE3_PAGEVERSION 0x00 1400 1401 typedef struct config_page_sas_expander_0 { 1402 config_extended_page_header_t Header; 1403 uint8_t PhysicalPort; 1404 uint8_t Reserved1; 1405 uint16_t EnclosureHandle; 1406 uint64_t SASAddress; 1407 uint32_t Reserved2; 1408 uint16_t DevHandle; 1409 uint16_t ParentDevHandle; 1410 uint16_t ExpanderChangeCount; 1411 uint16_t ExpanderRouteIndexes; 1412 uint8_t NumPhys; 1413 uint8_t SASLevel; 1414 uint8_t Flags; 1415 uint8_t Reserved3; 1416 } config_page_sas_expander_0_t; 1417 1418 #define MPI_SASEXPANDER0_PAGEVERSION 0x00 1419 1420 #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG 0x02 1421 #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS 0x01 1422 1423 1424 typedef struct config_page_sas_expander_1 { 1425 config_extended_page_header_t Header; 1426 uint32_t Reserved1; 1427 uint8_t NumPhys; 1428 uint8_t Phy; 1429 uint16_t Reserved2; 1430 uint8_t ProgrammedLinkRate; 1431 uint8_t HwLinkRate; 1432 uint16_t AttachedDevHandle; 1433 uint32_t PhyInfo; 1434 uint32_t AttachedDeviceInfo; 1435 uint16_t OwnerDevHandle; 1436 uint8_t ChangeCount; 1437 uint8_t Reserved3; 1438 uint8_t PhyIdentifier; 1439 uint8_t AttachedPhyIdentifier; 1440 uint8_t NumTableEntriesProg; 1441 uint8_t DiscoveryInfo; 1442 uint32_t Reserved4; 1443 } config_page_sas_expander_1_t; 1444 1445 #define MPI_SASEXPANDER1_PAGEVERSION 0x00 1446 1447 /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */ 1448 1449 /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */ 1450 1451 /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */ 1452 1453 /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */ 1454 1455 /* values for SAS Expander Page 1 DiscoveryInfo field */ 1456 #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE 0x02 1457 #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES 0x01 1458 1459 typedef struct config_page_sas_device_0 { 1460 config_extended_page_header_t Header; 1461 uint16_t Slot; 1462 uint16_t EnclosureHandle; 1463 uint64_t SASAddress; 1464 uint16_t ParentDevHandle; 1465 uint8_t PhyNum; 1466 uint8_t AccessStatus; 1467 uint16_t DevHandle; 1468 uint8_t TargetID; 1469 uint8_t Bus; 1470 uint32_t DeviceInfo; 1471 uint16_t Flags; 1472 uint8_t PhysicalPort; 1473 uint8_t Reserved2; 1474 } config_page_sas_device_0_t; 1475 1476 #define MPI_SASDEVICE0_PAGEVERSION 0x00 1477 1478 #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT 0x04 1479 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED 0x02 1480 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT 0x01 1481 1482 typedef struct config_page_sas_device_1 { 1483 config_extended_page_header_t Header; 1484 uint32_t Reserved1; 1485 uint64_t SASAddress; 1486 uint32_t Reserved2; 1487 uint16_t DevHandle; 1488 uint8_t TargetID; 1489 uint8_t Bus; 1490 uint8_t InitialRegDeviceFIS[20]; 1491 } config_page_sas_device_1_t; 1492 1493 #define MPI_SASDEVICE1_PAGEVERSION 0x00 1494 1495 typedef struct config_page_sas_phy_0 { 1496 config_extended_page_header_t Header; 1497 uint32_t Reserved1; 1498 uint64_t SASAddress; 1499 uint16_t AttachedDevHandle; 1500 uint8_t AttachedPhyIdentifier; 1501 uint8_t Reserved2; 1502 uint32_t AttachedDeviceInfo; 1503 uint8_t ProgrammedLinkRate; 1504 uint8_t HwLinkRate; 1505 uint8_t ChangeCount; 1506 uint8_t Reserved3; 1507 uint32_t PhyInfo; 1508 } config_page_sas_phy_0_t; 1509 1510 #define MPI_SASPHY0_PAGEVERSION 0x00 1511 1512 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK 0xF0 1513 #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE 0x00 1514 #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 0x80 1515 #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 0x90 1516 #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK 0x0F 1517 #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE 0x00 1518 #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 0x08 1519 #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 0x09 1520 1521 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK 0xF0 1522 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 0x80 1523 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 0x90 1524 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK 0x0F 1525 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 0x08 1526 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 0x09 1527 1528 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE 0x00004000 1529 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR 0x00002000 1530 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY 0x00001000 1531 1532 #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME 0x00000F00 1533 #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME 8 1534 1535 #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE 0x000000F0 1536 #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING 0x00000000 1537 #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING 0x00000010 1538 #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING 0x00000020 1539 1540 #define MPI_SAS_PHY0_DEVINFO_SATA_DEVICE 0x00000080 1541 1542 #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE 0x0000000F 1543 #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE 0x00000000 1544 #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED 0x00000001 1545 #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED 0x00000002 1546 #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE 0x00000003 1547 #define MPI_SAS_PHY0_PHYINFO_RATE_1_5 0x00000008 1548 #define MPI_SAS_PHY0_PHYINFO_RATE_3_0 0x00000009 1549 1550 typedef struct config_page_sas_phy_1 { 1551 config_extended_page_header_t Header; 1552 uint32_t Reserved1; 1553 uint32_t InvalidDwordCount; 1554 uint32_t RunningDisparityErrorCount; 1555 uint32_t LossDwordSynchCount; 1556 uint32_t PhyResetProblemCount; 1557 } config_page_sas_phy_1_t; 1558 1559 #define MPI_SASPHY1_PAGEVERSION 0x00 1560 1561 #ifdef __cplusplus 1562 } 1563 #endif 1564 1565 #endif /* _SYS_MPI_CNFG_H */ 1566