xref: /titanic_44/usr/src/uts/common/os/policy.c (revision 1c7cef2b81dd3b4359c7aae44ef1dc17bf2738c1)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/types.h>
27 #include <sys/sysmacros.h>
28 #include <sys/param.h>
29 #include <sys/systm.h>
30 #include <sys/cred_impl.h>
31 #include <sys/vnode.h>
32 #include <sys/vfs.h>
33 #include <sys/stat.h>
34 #include <sys/errno.h>
35 #include <sys/kmem.h>
36 #include <sys/user.h>
37 #include <sys/proc.h>
38 #include <sys/acct.h>
39 #include <sys/ipc_impl.h>
40 #include <sys/cmn_err.h>
41 #include <sys/debug.h>
42 #include <sys/policy.h>
43 #include <sys/kobj.h>
44 #include <sys/msg.h>
45 #include <sys/devpolicy.h>
46 #include <c2/audit.h>
47 #include <sys/varargs.h>
48 #include <sys/klpd.h>
49 #include <sys/modctl.h>
50 #include <sys/disp.h>
51 #include <sys/zone.h>
52 #include <inet/optcom.h>
53 #include <sys/sdt.h>
54 #include <sys/vfs.h>
55 #include <sys/mntent.h>
56 #include <sys/contract_impl.h>
57 #include <sys/dld_ioc.h>
58 
59 /*
60  * There are two possible layers of privilege routines and two possible
61  * levels of secpolicy.  Plus one other we may not be interested in, so
62  * we may need as many as 6 but no more.
63  */
64 #define	MAXPRIVSTACK		6
65 
66 int priv_debug = 0;
67 
68 /*
69  * This file contains the majority of the policy routines.
70  * Since the policy routines are defined by function and not
71  * by privilege, there is quite a bit of duplication of
72  * functions.
73  *
74  * The secpolicy functions must not make assumptions about
75  * locks held or not held as any lock can be held while they're
76  * being called.
77  *
78  * Credentials are read-only so no special precautions need to
79  * be taken while locking them.
80  *
81  * When a new policy check needs to be added to the system the
82  * following procedure should be followed:
83  *
84  *		Pick an appropriate secpolicy_*() function
85  *			-> done if one exists.
86  *		Create a new secpolicy function, preferably with
87  *		a descriptive name using the standard template.
88  *		Pick an appropriate privilege for the policy.
89  *		If no appropraite privilege exists, define new one
90  *		(this should be done with extreme care; in most cases
91  *		little is gained by adding another privilege)
92  *
93  * WHY ROOT IS STILL SPECIAL.
94  *
95  * In a number of the policy functions, there are still explicit
96  * checks for uid 0.  The rationale behind these is that many root
97  * owned files/objects hold configuration information which can give full
98  * privileges to the user once written to.  To prevent escalation
99  * of privilege by allowing just a single privilege to modify root owned
100  * objects, we've added these root specific checks where we considered
101  * them necessary: modifying root owned files, changing uids to 0, etc.
102  *
103  * PRIVILEGE ESCALATION AND ZONES.
104  *
105  * A number of operations potentially allow the caller to achieve
106  * privileges beyond the ones normally required to perform the operation.
107  * For example, if allowed to create a setuid 0 executable, a process can
108  * gain privileges beyond PRIV_FILE_SETID.  Zones, however, place
109  * restrictions on the ability to gain privileges beyond those available
110  * within the zone through file and process manipulation.  Hence, such
111  * operations require that the caller have an effective set that includes
112  * all privileges available within the current zone, or all privileges
113  * if executing in the global zone.
114  *
115  * This is indicated in the priv_policy* policy checking functions
116  * through a combination of parameters.  The "priv" parameter indicates
117  * the privilege that is required, and the "allzone" parameter indicates
118  * whether or not all privileges in the zone are required.  In addition,
119  * priv can be set to PRIV_ALL to indicate that all privileges are
120  * required (regardless of zone).  There are three scenarios of interest:
121  * (1) operation requires a specific privilege
122  * (2) operation requires a specific privilege, and requires all
123  *     privileges available within the zone (or all privileges if in
124  *     the global zone)
125  * (3) operation requires all privileges, regardless of zone
126  *
127  * For (1), priv should be set to the specific privilege, and allzone
128  * should be set to B_FALSE.
129  * For (2), priv should be set to the specific privilege, and allzone
130  * should be set to B_TRUE.
131  * For (3), priv should be set to PRIV_ALL, and allzone should be set
132  * to B_FALSE.
133  *
134  */
135 
136 /*
137  * The privileges are checked against the Effective set for
138  * ordinary processes and checked against the Limit set
139  * for euid 0 processes that haven't manipulated their privilege
140  * sets.
141  */
142 #define	HAS_ALLPRIVS(cr)	priv_isfullset(&CR_OEPRIV(cr))
143 #define	ZONEPRIVS(cr)		((cr)->cr_zone->zone_privset)
144 #define	HAS_ALLZONEPRIVS(cr)	priv_issubset(ZONEPRIVS(cr), &CR_OEPRIV(cr))
145 #define	HAS_PRIVILEGE(cr, pr)	((pr) == PRIV_ALL ? \
146 					HAS_ALLPRIVS(cr) : \
147 					PRIV_ISASSERT(&CR_OEPRIV(cr), pr))
148 
149 /*
150  * Policy checking functions.
151  *
152  * All of the system's policy should be implemented here.
153  */
154 
155 /*
156  * Private functions which take an additional va_list argument to
157  * implement an object specific policy override.
158  */
159 static int priv_policy_ap(const cred_t *, int, boolean_t, int,
160     const char *, va_list);
161 static int priv_policy_va(const cred_t *, int, boolean_t, int,
162     const char *, ...);
163 
164 /*
165  * Generic policy calls
166  *
167  * The "bottom" functions of policy control
168  */
169 static char *
170 mprintf(const char *fmt, ...)
171 {
172 	va_list args;
173 	char *buf;
174 	size_t len;
175 
176 	va_start(args, fmt);
177 	len = vsnprintf(NULL, 0, fmt, args) + 1;
178 	va_end(args);
179 
180 	buf = kmem_alloc(len, KM_NOSLEEP);
181 
182 	if (buf == NULL)
183 		return (NULL);
184 
185 	va_start(args, fmt);
186 	(void) vsnprintf(buf, len, fmt, args);
187 	va_end(args);
188 
189 	return (buf);
190 }
191 
192 /*
193  * priv_policy_errmsg()
194  *
195  * Generate an error message if privilege debugging is enabled system wide
196  * or for this particular process.
197  */
198 
199 #define	FMTHDR	"%s[%d]: missing privilege \"%s\" (euid = %d, syscall = %d)"
200 #define	FMTMSG	" for \"%s\""
201 #define	FMTFUN	" needed at %s+0x%lx"
202 
203 /* The maximum size privilege format: the concatenation of the above */
204 #define	FMTMAX	FMTHDR FMTMSG FMTFUN "\n"
205 
206 static void
207 priv_policy_errmsg(const cred_t *cr, int priv, const char *msg)
208 {
209 	struct proc *me;
210 	pc_t stack[MAXPRIVSTACK];
211 	int depth;
212 	int i;
213 	char *sym;
214 	ulong_t off;
215 	const char *pname;
216 
217 	char *cmd;
218 	char fmt[sizeof (FMTMAX)];
219 
220 	if ((me = curproc) == &p0)
221 		return;
222 
223 	/* Privileges must be defined  */
224 	ASSERT(priv == PRIV_ALL || priv == PRIV_MULTIPLE ||
225 	    priv == PRIV_ALLZONE || priv == PRIV_GLOBAL ||
226 	    priv_getbynum(priv) != NULL);
227 
228 	if (priv == PRIV_ALLZONE && INGLOBALZONE(me))
229 		priv = PRIV_ALL;
230 
231 	if (curthread->t_pre_sys)
232 		ttolwp(curthread)->lwp_badpriv = (short)priv;
233 
234 	if (priv_debug == 0 && (CR_FLAGS(cr) & PRIV_DEBUG) == 0)
235 		return;
236 
237 	(void) strcpy(fmt, FMTHDR);
238 
239 	if (me->p_user.u_comm[0])
240 		cmd = &me->p_user.u_comm[0];
241 	else
242 		cmd = "priv_policy";
243 
244 	if (msg != NULL && *msg != '\0') {
245 		(void) strcat(fmt, FMTMSG);
246 	} else {
247 		(void) strcat(fmt, "%s");
248 		msg = "";
249 	}
250 
251 	sym = NULL;
252 
253 	depth = getpcstack(stack, MAXPRIVSTACK);
254 
255 	/*
256 	 * Try to find the first interesting function on the stack.
257 	 * priv_policy* that's us, so completely uninteresting.
258 	 * suser(), drv_priv(), secpolicy_* are also called from
259 	 * too many locations to convey useful information.
260 	 */
261 	for (i = 0; i < depth; i++) {
262 		sym = kobj_getsymname((uintptr_t)stack[i], &off);
263 		if (sym != NULL &&
264 		    strstr(sym, "hasprocperm") == 0 &&
265 		    strcmp("suser", sym) != 0 &&
266 		    strcmp("ipcaccess", sym) != 0 &&
267 		    strcmp("drv_priv", sym) != 0 &&
268 		    strncmp("secpolicy_", sym, 10) != 0 &&
269 		    strncmp("priv_policy", sym, 11) != 0)
270 			break;
271 	}
272 
273 	if (sym != NULL)
274 		(void) strcat(fmt, FMTFUN);
275 
276 	(void) strcat(fmt, "\n");
277 
278 	switch (priv) {
279 	case PRIV_ALL:
280 		pname = "ALL";
281 		break;
282 	case PRIV_MULTIPLE:
283 		pname = "MULTIPLE";
284 		break;
285 	case PRIV_ALLZONE:
286 		pname = "ZONE";
287 		break;
288 	case PRIV_GLOBAL:
289 		pname = "GLOBAL";
290 		break;
291 	default:
292 		pname = priv_getbynum(priv);
293 		break;
294 	}
295 
296 	if (CR_FLAGS(cr) & PRIV_DEBUG) {
297 		/* Remember last message, just like lwp_badpriv. */
298 		if (curthread->t_pdmsg != NULL) {
299 			kmem_free(curthread->t_pdmsg,
300 			    strlen(curthread->t_pdmsg) + 1);
301 		}
302 
303 		curthread->t_pdmsg = mprintf(fmt, cmd, me->p_pid, pname,
304 		    cr->cr_uid, curthread->t_sysnum, msg, sym, off);
305 
306 		curthread->t_post_sys = 1;
307 	}
308 	if (priv_debug) {
309 		cmn_err(CE_NOTE, fmt, cmd, me->p_pid, pname, cr->cr_uid,
310 		    curthread->t_sysnum, msg, sym, off);
311 	}
312 }
313 
314 /*
315  * Override the policy, if appropriate.  Return 0 if the external
316  * policy engine approves.
317  */
318 static int
319 priv_policy_override(const cred_t *cr, int priv, boolean_t allzone, va_list ap)
320 {
321 	priv_set_t set;
322 	int ret;
323 
324 	if (!(CR_FLAGS(cr) & PRIV_XPOLICY))
325 		return (-1);
326 
327 	if (priv == PRIV_ALL) {
328 		priv_fillset(&set);
329 	} else if (allzone) {
330 		set = *ZONEPRIVS(cr);
331 	} else {
332 		priv_emptyset(&set);
333 		priv_addset(&set, priv);
334 	}
335 	ret = klpd_call(cr, &set, ap);
336 	return (ret);
337 }
338 
339 static int
340 priv_policy_override_set(const cred_t *cr, const priv_set_t *req, ...)
341 {
342 	va_list ap;
343 
344 	if (CR_FLAGS(cr) & PRIV_XPOLICY) {
345 		va_start(ap, req);
346 		return (klpd_call(cr, req, ap));
347 	}
348 	return (-1);
349 }
350 
351 /*
352  * Audit failure, log error message.
353  */
354 static void
355 priv_policy_err(const cred_t *cr, int priv, boolean_t allzone, const char *msg)
356 {
357 
358 	if (audit_active)
359 		audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 0);
360 	DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
361 
362 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) ||
363 	    curthread->t_pre_sys) {
364 		if (allzone && !HAS_ALLZONEPRIVS(cr)) {
365 			priv_policy_errmsg(cr, PRIV_ALLZONE, msg);
366 		} else {
367 			ASSERT(!HAS_PRIVILEGE(cr, priv));
368 			priv_policy_errmsg(cr, priv, msg);
369 		}
370 	}
371 }
372 
373 /*
374  * priv_policy_ap()
375  * return 0 or error.
376  * See block comment above for a description of "priv" and "allzone" usage.
377  */
378 static int
379 priv_policy_ap(const cred_t *cr, int priv, boolean_t allzone, int err,
380     const char *msg, va_list ap)
381 {
382 	if ((HAS_PRIVILEGE(cr, priv) && (!allzone || HAS_ALLZONEPRIVS(cr))) ||
383 	    (!servicing_interrupt() &&
384 	    priv_policy_override(cr, priv, allzone, ap) == 0)) {
385 		if ((allzone || priv == PRIV_ALL ||
386 		    !PRIV_ISASSERT(priv_basic, priv)) &&
387 		    !servicing_interrupt()) {
388 			PTOU(curproc)->u_acflag |= ASU; /* Needed for SVVS */
389 			if (audit_active)
390 				audit_priv(priv,
391 				    allzone ? ZONEPRIVS(cr) : NULL, 1);
392 		}
393 		err = 0;
394 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
395 	} else if (!servicing_interrupt()) {
396 		/* Failure audited in this procedure */
397 		priv_policy_err(cr, priv, allzone, msg);
398 	}
399 	return (err);
400 }
401 
402 int
403 priv_policy_va(const cred_t *cr, int priv, boolean_t allzone, int err,
404     const char *msg, ...)
405 {
406 	int ret;
407 	va_list ap;
408 
409 	va_start(ap, msg);
410 	ret = priv_policy_ap(cr, priv, allzone, err, msg, ap);
411 	va_end(ap);
412 
413 	return (ret);
414 }
415 
416 int
417 priv_policy(const cred_t *cr, int priv, boolean_t allzone, int err,
418     const char *msg)
419 {
420 	return (priv_policy_va(cr, priv, allzone, err, msg, KLPDARG_NOMORE));
421 }
422 
423 /*
424  * Return B_TRUE for sufficient privileges, B_FALSE for insufficient privileges.
425  */
426 boolean_t
427 priv_policy_choice(const cred_t *cr, int priv, boolean_t allzone)
428 {
429 	boolean_t res = HAS_PRIVILEGE(cr, priv) &&
430 	    (!allzone || HAS_ALLZONEPRIVS(cr));
431 
432 	/* Audit success only */
433 	if (res && audit_active &&
434 	    (allzone || priv == PRIV_ALL || !PRIV_ISASSERT(priv_basic, priv)) &&
435 	    !servicing_interrupt()) {
436 		audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 1);
437 	}
438 	if (res) {
439 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
440 	} else {
441 		DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
442 	}
443 	return (res);
444 }
445 
446 /*
447  * Non-auditing variant of priv_policy_choice().
448  */
449 boolean_t
450 priv_policy_only(const cred_t *cr, int priv, boolean_t allzone)
451 {
452 	boolean_t res = HAS_PRIVILEGE(cr, priv) &&
453 	    (!allzone || HAS_ALLZONEPRIVS(cr));
454 
455 	if (res) {
456 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
457 	} else {
458 		DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
459 	}
460 	return (res);
461 }
462 
463 /*
464  * Check whether all privileges in the required set are present.
465  */
466 static int
467 secpolicy_require_set(const cred_t *cr, const priv_set_t *req, const char *msg)
468 {
469 	int priv;
470 	int pfound = -1;
471 	priv_set_t pset;
472 
473 	if (req == PRIV_FULLSET ? HAS_ALLPRIVS(cr) : priv_issubset(req,
474 	    &CR_OEPRIV(cr))) {
475 		return (0);
476 	}
477 
478 	if (priv_policy_override_set(cr, req, KLPDARG_NOMORE) == 0)
479 		return (0);
480 
481 	if (req == PRIV_FULLSET || priv_isfullset(req)) {
482 		priv_policy_err(cr, PRIV_ALL, B_FALSE, msg);
483 		return (EACCES);
484 	}
485 
486 	pset = CR_OEPRIV(cr);		/* present privileges */
487 	priv_inverse(&pset);		/* all non present privileges */
488 	priv_intersect(req, &pset);	/* the actual missing privs */
489 
490 	if (audit_active)
491 		audit_priv(PRIV_NONE, &pset, 0);
492 	/*
493 	 * Privilege debugging; special case "one privilege in set".
494 	 */
495 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) || curthread->t_pre_sys) {
496 		for (priv = 0; priv < nprivs; priv++) {
497 			if (priv_ismember(&pset, priv)) {
498 				if (pfound != -1) {
499 					/* Multiple missing privs */
500 					priv_policy_errmsg(cr, PRIV_MULTIPLE,
501 					    msg);
502 					return (EACCES);
503 				}
504 				pfound = priv;
505 			}
506 		}
507 		ASSERT(pfound != -1);
508 		/* Just the one missing privilege */
509 		priv_policy_errmsg(cr, pfound, msg);
510 	}
511 
512 	return (EACCES);
513 }
514 
515 /*
516  * Called when an operation requires that the caller be in the
517  * global zone, regardless of privilege.
518  */
519 static int
520 priv_policy_global(const cred_t *cr)
521 {
522 	if (crgetzoneid(cr) == GLOBAL_ZONEID)
523 		return (0);	/* success */
524 
525 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) ||
526 	    curthread->t_pre_sys) {
527 		priv_policy_errmsg(cr, PRIV_GLOBAL, NULL);
528 	}
529 	return (EPERM);
530 }
531 
532 /*
533  * Changing process priority
534  */
535 int
536 secpolicy_setpriority(const cred_t *cr)
537 {
538 	return (PRIV_POLICY(cr, PRIV_PROC_PRIOCNTL, B_FALSE, EPERM, NULL));
539 }
540 
541 /*
542  * Binding to a privileged port, port must be specified in host byte
543  * order.
544  */
545 int
546 secpolicy_net_privaddr(const cred_t *cr, in_port_t port, int proto)
547 {
548 	char *reason;
549 	int priv;
550 
551 	switch (port) {
552 	case 137:
553 	case 138:
554 	case 139:
555 	case 445:
556 		/*
557 		 * NBT and SMB ports, these are extra privileged ports,
558 		 * allow bind only if the SYS_SMB privilege is present.
559 		 */
560 		priv = PRIV_SYS_SMB;
561 		reason = "NBT or SMB port";
562 		break;
563 
564 	case 2049:
565 	case 4045:
566 		/*
567 		 * NFS ports, these are extra privileged ports, allow bind
568 		 * only if the SYS_NFS privilege is present.
569 		 */
570 		priv = PRIV_SYS_NFS;
571 		reason = "NFS port";
572 		break;
573 
574 	default:
575 		priv = PRIV_NET_PRIVADDR;
576 		reason = NULL;
577 		break;
578 
579 	}
580 
581 	return (priv_policy_va(cr, priv, B_FALSE, EACCES, reason,
582 	    KLPDARG_PORT, (int)proto, (int)port, KLPDARG_NOMORE));
583 }
584 
585 /*
586  * Binding to a multilevel port on a trusted (labeled) system.
587  */
588 int
589 secpolicy_net_bindmlp(const cred_t *cr)
590 {
591 	return (PRIV_POLICY(cr, PRIV_NET_BINDMLP, B_FALSE, EACCES, NULL));
592 }
593 
594 /*
595  * Allow a communication between a zone and an unlabeled host when their
596  * labels don't match.
597  */
598 int
599 secpolicy_net_mac_aware(const cred_t *cr)
600 {
601 	return (PRIV_POLICY(cr, PRIV_NET_MAC_AWARE, B_FALSE, EACCES, NULL));
602 }
603 
604 /*
605  * Common routine which determines whether a given credential can
606  * act on a given mount.
607  * When called through mount, the parameter needoptcheck is a pointer
608  * to a boolean variable which will be set to either true or false,
609  * depending on whether the mount policy should change the mount options.
610  * In all other cases, needoptcheck should be a NULL pointer.
611  */
612 static int
613 secpolicy_fs_common(cred_t *cr, vnode_t *mvp, const vfs_t *vfsp,
614     boolean_t *needoptcheck)
615 {
616 	boolean_t allzone = B_FALSE;
617 	boolean_t mounting = needoptcheck != NULL;
618 
619 	/*
620 	 * Short circuit the following cases:
621 	 *	vfsp == NULL or mvp == NULL (pure privilege check)
622 	 *	have all privileges - no further checks required
623 	 *	and no mount options need to be set.
624 	 */
625 	if (vfsp == NULL || mvp == NULL || HAS_ALLPRIVS(cr)) {
626 		if (mounting)
627 			*needoptcheck = B_FALSE;
628 
629 		return (priv_policy_va(cr, PRIV_SYS_MOUNT, allzone, EPERM,
630 		    NULL, KLPDARG_VNODE, mvp, (char *)NULL, KLPDARG_NOMORE));
631 	}
632 
633 	/*
634 	 * When operating on an existing mount (either we're not mounting
635 	 * or we're doing a remount and VFS_REMOUNT will be set), zones
636 	 * can operate only on mounts established by the zone itself.
637 	 */
638 	if (!mounting || (vfsp->vfs_flag & VFS_REMOUNT) != 0) {
639 		zoneid_t zoneid = crgetzoneid(cr);
640 
641 		if (zoneid != GLOBAL_ZONEID &&
642 		    vfsp->vfs_zone->zone_id != zoneid) {
643 			return (EPERM);
644 		}
645 	}
646 
647 	if (mounting)
648 		*needoptcheck = B_TRUE;
649 
650 	/*
651 	 * Overlay mounts may hide important stuff; if you can't write to a
652 	 * mount point but would be able to mount on top of it, you can
653 	 * escalate your privileges.
654 	 * So we go about asking the same questions namefs does when it
655 	 * decides whether you can mount over a file or not but with the
656 	 * added restriction that you can only mount on top of a regular
657 	 * file or directory.
658 	 * If we have all the zone's privileges, we skip all other checks,
659 	 * or else we may actually get in trouble inside the automounter.
660 	 */
661 	if ((mvp->v_flag & VROOT) != 0 ||
662 	    (mvp->v_type != VDIR && mvp->v_type != VREG) ||
663 	    HAS_ALLZONEPRIVS(cr)) {
664 		allzone = B_TRUE;
665 	} else {
666 		vattr_t va;
667 		int err;
668 
669 		va.va_mask = AT_UID|AT_MODE;
670 		err = VOP_GETATTR(mvp, &va, 0, cr, NULL);
671 		if (err != 0)
672 			return (err);
673 
674 		if ((err = secpolicy_vnode_owner(cr, va.va_uid)) != 0)
675 			return (err);
676 
677 		if ((va.va_mode & VWRITE) == 0 &&
678 		    secpolicy_vnode_access(cr, mvp, va.va_uid, VWRITE) != 0) {
679 			return (EACCES);
680 		}
681 	}
682 	return (priv_policy_va(cr, PRIV_SYS_MOUNT, allzone, EPERM,
683 	    NULL, KLPDARG_VNODE, mvp, (char *)NULL, KLPDARG_NOMORE));
684 }
685 
686 void
687 secpolicy_fs_mount_clearopts(cred_t *cr, struct vfs *vfsp)
688 {
689 	boolean_t amsuper = HAS_ALLZONEPRIVS(cr);
690 
691 	/*
692 	 * check; if we don't have either "nosuid" or
693 	 * both "nosetuid" and "nodevices", then we add
694 	 * "nosuid"; this depends on how the current
695 	 * implementation works (it first checks nosuid).  In a
696 	 * zone, a user with all zone privileges can mount with
697 	 * "setuid" but never with "devices".
698 	 */
699 	if (!vfs_optionisset(vfsp, MNTOPT_NOSUID, NULL) &&
700 	    (!vfs_optionisset(vfsp, MNTOPT_NODEVICES, NULL) ||
701 	    !vfs_optionisset(vfsp, MNTOPT_NOSETUID, NULL))) {
702 		if (crgetzoneid(cr) == GLOBAL_ZONEID || !amsuper)
703 			vfs_setmntopt(vfsp, MNTOPT_NOSUID, NULL, 0);
704 		else
705 			vfs_setmntopt(vfsp, MNTOPT_NODEVICES, NULL, 0);
706 	}
707 	/*
708 	 * If we're not the local super user, we set the "restrict"
709 	 * option to indicate to automountd that this mount should
710 	 * be handled with care.
711 	 */
712 	if (!amsuper)
713 		vfs_setmntopt(vfsp, MNTOPT_RESTRICT, NULL, 0);
714 
715 }
716 
717 extern vnode_t *rootvp;
718 extern vfs_t *rootvfs;
719 
720 int
721 secpolicy_fs_mount(cred_t *cr, vnode_t *mvp, struct vfs *vfsp)
722 {
723 	boolean_t needoptchk;
724 	int error;
725 
726 	/*
727 	 * If it's a remount, get the underlying mount point,
728 	 * except for the root where we use the rootvp.
729 	 */
730 	if ((vfsp->vfs_flag & VFS_REMOUNT) != 0) {
731 		if (vfsp == rootvfs)
732 			mvp = rootvp;
733 		else
734 			mvp = vfsp->vfs_vnodecovered;
735 	}
736 
737 	error = secpolicy_fs_common(cr, mvp, vfsp, &needoptchk);
738 
739 	if (error == 0 && needoptchk) {
740 		secpolicy_fs_mount_clearopts(cr, vfsp);
741 	}
742 
743 	return (error);
744 }
745 
746 /*
747  * Does the policy computations for "ownership" of a mount;
748  * here ownership is defined as the ability to "mount"
749  * the filesystem originally.  The rootvfs doesn't cover any
750  * vnodes; we attribute its ownership to the rootvp.
751  */
752 static int
753 secpolicy_fs_owner(cred_t *cr, const struct vfs *vfsp)
754 {
755 	vnode_t *mvp;
756 
757 	if (vfsp == NULL)
758 		mvp = NULL;
759 	else if (vfsp == rootvfs)
760 		mvp = rootvp;
761 	else
762 		mvp = vfsp->vfs_vnodecovered;
763 
764 	return (secpolicy_fs_common(cr, mvp, vfsp, NULL));
765 }
766 
767 int
768 secpolicy_fs_unmount(cred_t *cr, struct vfs *vfsp)
769 {
770 	return (secpolicy_fs_owner(cr, vfsp));
771 }
772 
773 /*
774  * Quotas are a resource, but if one has the ability to mount a filesystem, he
775  * should be able to modify quotas on it.
776  */
777 int
778 secpolicy_fs_quota(const cred_t *cr, const vfs_t *vfsp)
779 {
780 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
781 }
782 
783 /*
784  * Exceeding minfree: also a per-mount resource constraint.
785  */
786 int
787 secpolicy_fs_minfree(const cred_t *cr, const vfs_t *vfsp)
788 {
789 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
790 }
791 
792 int
793 secpolicy_fs_config(const cred_t *cr, const vfs_t *vfsp)
794 {
795 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
796 }
797 
798 /* ARGSUSED */
799 int
800 secpolicy_fs_linkdir(const cred_t *cr, const vfs_t *vfsp)
801 {
802 	return (PRIV_POLICY(cr, PRIV_SYS_LINKDIR, B_FALSE, EPERM, NULL));
803 }
804 
805 /*
806  * Name:        secpolicy_vnode_access()
807  *
808  * Parameters:  Process credential
809  *		vnode
810  *		uid of owner of vnode
811  *		permission bits not granted to the caller when examining
812  *		file mode bits (i.e., when a process wants to open a
813  *		mode 444 file for VREAD|VWRITE, this function should be
814  *		called only with a VWRITE argument).
815  *
816  * Normal:      Verifies that cred has the appropriate privileges to
817  *              override the mode bits that were denied.
818  *
819  * Override:    file_dac_execute - if VEXEC bit was denied and vnode is
820  *                      not a directory.
821  *              file_dac_read - if VREAD bit was denied.
822  *              file_dac_search - if VEXEC bit was denied and vnode is
823  *                      a directory.
824  *              file_dac_write - if VWRITE bit was denied.
825  *
826  *		Root owned files are special cased to protect system
827  *		configuration files and such.
828  *
829  * Output:      EACCES - if privilege check fails.
830  */
831 
832 /* ARGSUSED */
833 int
834 secpolicy_vnode_access(const cred_t *cr, vnode_t *vp, uid_t owner, mode_t mode)
835 {
836 	if ((mode & VREAD) && priv_policy_va(cr, PRIV_FILE_DAC_READ, B_FALSE,
837 	    EACCES, NULL, KLPDARG_VNODE, vp, (char *)NULL,
838 	    KLPDARG_NOMORE) != 0) {
839 		return (EACCES);
840 	}
841 
842 	if (mode & VWRITE) {
843 		boolean_t allzone;
844 
845 		if (owner == 0 && cr->cr_uid != 0)
846 			allzone = B_TRUE;
847 		else
848 			allzone = B_FALSE;
849 		if (priv_policy_va(cr, PRIV_FILE_DAC_WRITE, allzone, EACCES,
850 		    NULL, KLPDARG_VNODE, vp, (char *)NULL,
851 		    KLPDARG_NOMORE) != 0) {
852 			return (EACCES);
853 		}
854 	}
855 
856 	if (mode & VEXEC) {
857 		/*
858 		 * Directories use file_dac_search to override the execute bit.
859 		 */
860 		int p = vp->v_type == VDIR ? PRIV_FILE_DAC_SEARCH :
861 		    PRIV_FILE_DAC_EXECUTE;
862 
863 		return (priv_policy_va(cr, p, B_FALSE, EACCES, NULL,
864 		    KLPDARG_VNODE, vp, (char *)NULL, KLPDARG_NOMORE));
865 	}
866 	return (0);
867 }
868 
869 /*
870  * Name:	secpolicy_vnode_setid_modify()
871  *
872  * Normal:	verify that subject can set the file setid flags.
873  *
874  * Output:	EPERM - if not privileged.
875  */
876 
877 static int
878 secpolicy_vnode_setid_modify(const cred_t *cr, uid_t owner)
879 {
880 	/* If changing to suid root, must have all zone privs */
881 	boolean_t allzone = B_TRUE;
882 
883 	if (owner != 0) {
884 		if (owner == cr->cr_uid)
885 			return (0);
886 		allzone = B_FALSE;
887 	}
888 	return (PRIV_POLICY(cr, PRIV_FILE_SETID, allzone, EPERM, NULL));
889 }
890 
891 /*
892  * Are we allowed to retain the set-uid/set-gid bits when
893  * changing ownership or when writing to a file?
894  * "issuid" should be true when set-uid; only in that case
895  * root ownership is checked (setgid is assumed).
896  */
897 int
898 secpolicy_vnode_setid_retain(const cred_t *cred, boolean_t issuidroot)
899 {
900 	if (issuidroot && !HAS_ALLZONEPRIVS(cred))
901 		return (EPERM);
902 
903 	return (!PRIV_POLICY_CHOICE(cred, PRIV_FILE_SETID, B_FALSE));
904 }
905 
906 /*
907  * Name:	secpolicy_vnode_setids_setgids()
908  *
909  * Normal:	verify that subject can set the file setgid flag.
910  *
911  * Output:	EPERM - if not privileged
912  */
913 
914 int
915 secpolicy_vnode_setids_setgids(const cred_t *cred, gid_t gid)
916 {
917 	if (!groupmember(gid, cred))
918 		return (PRIV_POLICY(cred, PRIV_FILE_SETID, B_FALSE, EPERM,
919 		    NULL));
920 	return (0);
921 }
922 
923 /*
924  * Name:	secpolicy_vnode_chown
925  *
926  * Normal:	Determine if subject can chown owner of a file.
927  *
928  * Output:	EPERM - if access denied
929  */
930 
931 int
932 secpolicy_vnode_chown(const cred_t *cred, uid_t owner)
933 {
934 	boolean_t is_owner = (owner == crgetuid(cred));
935 	boolean_t allzone = B_FALSE;
936 	int priv;
937 
938 	if (!is_owner) {
939 		allzone = (owner == 0);
940 		priv = PRIV_FILE_CHOWN;
941 	} else {
942 		priv = HAS_PRIVILEGE(cred, PRIV_FILE_CHOWN) ?
943 		    PRIV_FILE_CHOWN : PRIV_FILE_CHOWN_SELF;
944 	}
945 
946 	return (PRIV_POLICY(cred, priv, allzone, EPERM, NULL));
947 }
948 
949 /*
950  * Name:	secpolicy_vnode_create_gid
951  *
952  * Normal:	Determine if subject can change group ownership of a file.
953  *
954  * Output:	EPERM - if access denied
955  */
956 int
957 secpolicy_vnode_create_gid(const cred_t *cred)
958 {
959 	if (HAS_PRIVILEGE(cred, PRIV_FILE_CHOWN))
960 		return (PRIV_POLICY(cred, PRIV_FILE_CHOWN, B_FALSE, EPERM,
961 		    NULL));
962 	else
963 		return (PRIV_POLICY(cred, PRIV_FILE_CHOWN_SELF, B_FALSE, EPERM,
964 		    NULL));
965 }
966 
967 /*
968  * Name:	secpolicy_vnode_utime_modify()
969  *
970  * Normal:	verify that subject can modify the utime on a file.
971  *
972  * Output:	EPERM - if access denied.
973  */
974 
975 static int
976 secpolicy_vnode_utime_modify(const cred_t *cred)
977 {
978 	return (PRIV_POLICY(cred, PRIV_FILE_OWNER, B_FALSE, EPERM,
979 	    "modify file times"));
980 }
981 
982 
983 /*
984  * Name:	secpolicy_vnode_setdac()
985  *
986  * Normal:	verify that subject can modify the mode of a file.
987  *		allzone privilege needed when modifying root owned object.
988  *
989  * Output:	EPERM - if access denied.
990  */
991 
992 int
993 secpolicy_vnode_setdac(const cred_t *cred, uid_t owner)
994 {
995 	if (owner == cred->cr_uid)
996 		return (0);
997 
998 	return (PRIV_POLICY(cred, PRIV_FILE_OWNER, owner == 0, EPERM, NULL));
999 }
1000 /*
1001  * Name:	secpolicy_vnode_stky_modify()
1002  *
1003  * Normal:	verify that subject can make a file a "sticky".
1004  *
1005  * Output:	EPERM - if access denied.
1006  */
1007 
1008 int
1009 secpolicy_vnode_stky_modify(const cred_t *cred)
1010 {
1011 	return (PRIV_POLICY(cred, PRIV_SYS_CONFIG, B_FALSE, EPERM,
1012 	    "set file sticky"));
1013 }
1014 
1015 /*
1016  * Policy determines whether we can remove an entry from a directory,
1017  * regardless of permission bits.
1018  */
1019 int
1020 secpolicy_vnode_remove(const cred_t *cr)
1021 {
1022 	return (PRIV_POLICY(cr, PRIV_FILE_OWNER, B_FALSE, EACCES,
1023 	    "sticky directory"));
1024 }
1025 
1026 int
1027 secpolicy_vnode_owner(const cred_t *cr, uid_t owner)
1028 {
1029 	boolean_t allzone = (owner == 0);
1030 
1031 	if (owner == cr->cr_uid)
1032 		return (0);
1033 
1034 	return (PRIV_POLICY(cr, PRIV_FILE_OWNER, allzone, EPERM, NULL));
1035 }
1036 
1037 void
1038 secpolicy_setid_clear(vattr_t *vap, cred_t *cr)
1039 {
1040 	if ((vap->va_mode & (S_ISUID | S_ISGID)) != 0 &&
1041 	    secpolicy_vnode_setid_retain(cr,
1042 	    (vap->va_mode & S_ISUID) != 0 &&
1043 	    (vap->va_mask & AT_UID) != 0 && vap->va_uid == 0) != 0) {
1044 		vap->va_mask |= AT_MODE;
1045 		vap->va_mode &= ~(S_ISUID|S_ISGID);
1046 	}
1047 }
1048 
1049 int
1050 secpolicy_setid_setsticky_clear(vnode_t *vp, vattr_t *vap, const vattr_t *ovap,
1051     cred_t *cr)
1052 {
1053 	int error;
1054 
1055 	if ((vap->va_mode & S_ISUID) != 0 &&
1056 	    (error = secpolicy_vnode_setid_modify(cr,
1057 	    ovap->va_uid)) != 0) {
1058 		return (error);
1059 	}
1060 
1061 	/*
1062 	 * Check privilege if attempting to set the
1063 	 * sticky bit on a non-directory.
1064 	 */
1065 	if (vp->v_type != VDIR && (vap->va_mode & S_ISVTX) != 0 &&
1066 	    secpolicy_vnode_stky_modify(cr) != 0) {
1067 		vap->va_mode &= ~S_ISVTX;
1068 	}
1069 
1070 	/*
1071 	 * Check for privilege if attempting to set the
1072 	 * group-id bit.
1073 	 */
1074 	if ((vap->va_mode & S_ISGID) != 0 &&
1075 	    secpolicy_vnode_setids_setgids(cr, ovap->va_gid) != 0) {
1076 		vap->va_mode &= ~S_ISGID;
1077 	}
1078 
1079 	return (0);
1080 }
1081 
1082 #define	ATTR_FLAG_PRIV(attr, value, cr)	\
1083 	PRIV_POLICY(cr, value ? PRIV_FILE_FLAG_SET : PRIV_ALL, \
1084 	B_FALSE, EPERM, NULL)
1085 
1086 /*
1087  * Check privileges for setting xvattr attributes
1088  */
1089 int
1090 secpolicy_xvattr(xvattr_t *xvap, uid_t owner, cred_t *cr, vtype_t vtype)
1091 {
1092 	xoptattr_t *xoap;
1093 	int error = 0;
1094 
1095 	if ((xoap = xva_getxoptattr(xvap)) == NULL)
1096 		return (EINVAL);
1097 
1098 	/*
1099 	 * First process the DOS bits
1100 	 */
1101 	if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE) ||
1102 	    XVA_ISSET_REQ(xvap, XAT_HIDDEN) ||
1103 	    XVA_ISSET_REQ(xvap, XAT_READONLY) ||
1104 	    XVA_ISSET_REQ(xvap, XAT_SYSTEM) ||
1105 	    XVA_ISSET_REQ(xvap, XAT_CREATETIME)) {
1106 		if ((error = secpolicy_vnode_owner(cr, owner)) != 0)
1107 			return (error);
1108 	}
1109 
1110 	/*
1111 	 * Now handle special attributes
1112 	 */
1113 
1114 	if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE))
1115 		error = ATTR_FLAG_PRIV(XAT_IMMUTABLE,
1116 		    xoap->xoa_immutable, cr);
1117 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_NOUNLINK))
1118 		error = ATTR_FLAG_PRIV(XAT_NOUNLINK,
1119 		    xoap->xoa_nounlink, cr);
1120 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_APPENDONLY))
1121 		error = ATTR_FLAG_PRIV(XAT_APPENDONLY,
1122 		    xoap->xoa_appendonly, cr);
1123 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_NODUMP))
1124 		error = ATTR_FLAG_PRIV(XAT_NODUMP,
1125 		    xoap->xoa_nodump, cr);
1126 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_OPAQUE))
1127 		error = EPERM;
1128 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED)) {
1129 		error = ATTR_FLAG_PRIV(XAT_AV_QUARANTINED,
1130 		    xoap->xoa_av_quarantined, cr);
1131 		if (error == 0 && vtype != VREG && xoap->xoa_av_quarantined)
1132 			error = EINVAL;
1133 	}
1134 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED))
1135 		error = ATTR_FLAG_PRIV(XAT_AV_MODIFIED,
1136 		    xoap->xoa_av_modified, cr);
1137 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP)) {
1138 		error = ATTR_FLAG_PRIV(XAT_AV_SCANSTAMP,
1139 		    xoap->xoa_av_scanstamp, cr);
1140 		if (error == 0 && vtype != VREG)
1141 			error = EINVAL;
1142 	}
1143 	return (error);
1144 }
1145 
1146 /*
1147  * This function checks the policy decisions surrounding the
1148  * vop setattr call.
1149  *
1150  * It should be called after sufficient locks have been established
1151  * on the underlying data structures.  No concurrent modifications
1152  * should be allowed.
1153  *
1154  * The caller must pass in unlocked version of its vaccess function
1155  * this is required because vop_access function should lock the
1156  * node for reading.  A three argument function should be defined
1157  * which accepts the following argument:
1158  * 	A pointer to the internal "node" type (inode *)
1159  *	vnode access bits (VREAD|VWRITE|VEXEC)
1160  *	a pointer to the credential
1161  *
1162  * This function makes the following policy decisions:
1163  *
1164  *		- change permissions
1165  *			- permission to change file mode if not owner
1166  *			- permission to add sticky bit to non-directory
1167  *			- permission to add set-gid bit
1168  *
1169  * The ovap argument should include AT_MODE|AT_UID|AT_GID.
1170  *
1171  * If the vap argument does not include AT_MODE, the mode will be copied from
1172  * ovap.  In certain situations set-uid/set-gid bits need to be removed;
1173  * this is done by marking vap->va_mask to include AT_MODE and va_mode
1174  * is updated to the newly computed mode.
1175  */
1176 
1177 int
1178 secpolicy_vnode_setattr(cred_t *cr, struct vnode *vp, struct vattr *vap,
1179 	const struct vattr *ovap, int flags,
1180 	int unlocked_access(void *, int, cred_t *),
1181 	void *node)
1182 {
1183 	int mask = vap->va_mask;
1184 	int error = 0;
1185 	boolean_t skipaclchk = (flags & ATTR_NOACLCHECK) ? B_TRUE : B_FALSE;
1186 
1187 	if (mask & AT_SIZE) {
1188 		if (vp->v_type == VDIR) {
1189 			error = EISDIR;
1190 			goto out;
1191 		}
1192 
1193 		/*
1194 		 * If ATTR_NOACLCHECK is set in the flags, then we don't
1195 		 * perform the secondary unlocked_access() call since the
1196 		 * ACL (if any) is being checked there.
1197 		 */
1198 		if (skipaclchk == B_FALSE) {
1199 			error = unlocked_access(node, VWRITE, cr);
1200 			if (error)
1201 				goto out;
1202 		}
1203 	}
1204 	if (mask & AT_MODE) {
1205 		/*
1206 		 * If not the owner of the file then check privilege
1207 		 * for two things: the privilege to set the mode at all
1208 		 * and, if we're setting setuid, we also need permissions
1209 		 * to add the set-uid bit, if we're not the owner.
1210 		 * In the specific case of creating a set-uid root
1211 		 * file, we need even more permissions.
1212 		 */
1213 		if ((error = secpolicy_vnode_setdac(cr, ovap->va_uid)) != 0)
1214 			goto out;
1215 
1216 		if ((error = secpolicy_setid_setsticky_clear(vp, vap,
1217 		    ovap, cr)) != 0)
1218 			goto out;
1219 	} else
1220 		vap->va_mode = ovap->va_mode;
1221 
1222 	if (mask & (AT_UID|AT_GID)) {
1223 		boolean_t checkpriv = B_FALSE;
1224 
1225 		/*
1226 		 * Chowning files.
1227 		 *
1228 		 * If you are the file owner:
1229 		 *	chown to other uid		FILE_CHOWN_SELF
1230 		 *	chown to gid (non-member) 	FILE_CHOWN_SELF
1231 		 *	chown to gid (member) 		<none>
1232 		 *
1233 		 * Instead of PRIV_FILE_CHOWN_SELF, FILE_CHOWN is also
1234 		 * acceptable but the first one is reported when debugging.
1235 		 *
1236 		 * If you are not the file owner:
1237 		 *	chown from root			PRIV_FILE_CHOWN + zone
1238 		 *	chown from other to any		PRIV_FILE_CHOWN
1239 		 *
1240 		 */
1241 		if (cr->cr_uid != ovap->va_uid) {
1242 			checkpriv = B_TRUE;
1243 		} else {
1244 			if (((mask & AT_UID) && vap->va_uid != ovap->va_uid) ||
1245 			    ((mask & AT_GID) && vap->va_gid != ovap->va_gid &&
1246 			    !groupmember(vap->va_gid, cr))) {
1247 				checkpriv = B_TRUE;
1248 			}
1249 		}
1250 		/*
1251 		 * If necessary, check privilege to see if update can be done.
1252 		 */
1253 		if (checkpriv &&
1254 		    (error = secpolicy_vnode_chown(cr, ovap->va_uid)) != 0) {
1255 			goto out;
1256 		}
1257 
1258 		/*
1259 		 * If the file has either the set UID or set GID bits
1260 		 * set and the caller can set the bits, then leave them.
1261 		 */
1262 		secpolicy_setid_clear(vap, cr);
1263 	}
1264 	if (mask & (AT_ATIME|AT_MTIME)) {
1265 		/*
1266 		 * If not the file owner and not otherwise privileged,
1267 		 * always return an error when setting the
1268 		 * time other than the current (ATTR_UTIME flag set).
1269 		 * If setting the current time (ATTR_UTIME not set) then
1270 		 * unlocked_access will check permissions according to policy.
1271 		 */
1272 		if (cr->cr_uid != ovap->va_uid) {
1273 			if (flags & ATTR_UTIME)
1274 				error = secpolicy_vnode_utime_modify(cr);
1275 			else if (skipaclchk == B_FALSE) {
1276 				error = unlocked_access(node, VWRITE, cr);
1277 				if (error == EACCES &&
1278 				    secpolicy_vnode_utime_modify(cr) == 0)
1279 					error = 0;
1280 			}
1281 			if (error)
1282 				goto out;
1283 		}
1284 	}
1285 
1286 	/*
1287 	 * Check for optional attributes here by checking the following:
1288 	 */
1289 	if (mask & AT_XVATTR)
1290 		error = secpolicy_xvattr((xvattr_t *)vap, ovap->va_uid, cr,
1291 		    vp->v_type);
1292 out:
1293 	return (error);
1294 }
1295 
1296 /*
1297  * Name:	secpolicy_pcfs_modify_bootpartition()
1298  *
1299  * Normal:	verify that subject can modify a pcfs boot partition.
1300  *
1301  * Output:	EACCES - if privilege check failed.
1302  */
1303 /*ARGSUSED*/
1304 int
1305 secpolicy_pcfs_modify_bootpartition(const cred_t *cred)
1306 {
1307 	return (PRIV_POLICY(cred, PRIV_ALL, B_FALSE, EACCES,
1308 	    "modify pcfs boot partition"));
1309 }
1310 
1311 /*
1312  * System V IPC routines
1313  */
1314 int
1315 secpolicy_ipc_owner(const cred_t *cr, const struct kipc_perm *ip)
1316 {
1317 	if (crgetzoneid(cr) != ip->ipc_zoneid ||
1318 	    (cr->cr_uid != ip->ipc_uid && cr->cr_uid != ip->ipc_cuid)) {
1319 		boolean_t allzone = B_FALSE;
1320 		if (ip->ipc_uid == 0 || ip->ipc_cuid == 0)
1321 			allzone = B_TRUE;
1322 		return (PRIV_POLICY(cr, PRIV_IPC_OWNER, allzone, EPERM, NULL));
1323 	}
1324 	return (0);
1325 }
1326 
1327 int
1328 secpolicy_ipc_config(const cred_t *cr)
1329 {
1330 	return (PRIV_POLICY(cr, PRIV_SYS_IPC_CONFIG, B_FALSE, EPERM, NULL));
1331 }
1332 
1333 int
1334 secpolicy_ipc_access(const cred_t *cr, const struct kipc_perm *ip, mode_t mode)
1335 {
1336 
1337 	boolean_t allzone = B_FALSE;
1338 
1339 	ASSERT((mode & (MSG_R|MSG_W)) != 0);
1340 
1341 	if ((mode & MSG_R) &&
1342 	    PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0)
1343 		return (EACCES);
1344 
1345 	if (mode & MSG_W) {
1346 		if (cr->cr_uid != 0 && (ip->ipc_uid == 0 || ip->ipc_cuid == 0))
1347 			allzone = B_TRUE;
1348 
1349 		return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES,
1350 		    NULL));
1351 	}
1352 	return (0);
1353 }
1354 
1355 int
1356 secpolicy_rsm_access(const cred_t *cr, uid_t owner, mode_t mode)
1357 {
1358 	boolean_t allzone = B_FALSE;
1359 
1360 	ASSERT((mode & (MSG_R|MSG_W)) != 0);
1361 
1362 	if ((mode & MSG_R) &&
1363 	    PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0)
1364 		return (EACCES);
1365 
1366 	if (mode & MSG_W) {
1367 		if (cr->cr_uid != 0 && owner == 0)
1368 			allzone = B_TRUE;
1369 
1370 		return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES,
1371 		    NULL));
1372 	}
1373 	return (0);
1374 }
1375 
1376 /*
1377  * Audit configuration.
1378  */
1379 int
1380 secpolicy_audit_config(const cred_t *cr)
1381 {
1382 	return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL));
1383 }
1384 
1385 /*
1386  * Audit record generation.
1387  */
1388 int
1389 secpolicy_audit_modify(const cred_t *cr)
1390 {
1391 	return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM, NULL));
1392 }
1393 
1394 /*
1395  * Get audit attributes.
1396  * Either PRIV_SYS_AUDIT or PRIV_PROC_AUDIT required; report the
1397  * "Least" of the two privileges on error.
1398  */
1399 int
1400 secpolicy_audit_getattr(const cred_t *cr)
1401 {
1402 	if (!PRIV_POLICY_ONLY(cr, PRIV_SYS_AUDIT, B_FALSE)) {
1403 		return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM,
1404 		    NULL));
1405 	} else {
1406 		return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL));
1407 	}
1408 }
1409 
1410 
1411 /*
1412  * Locking physical memory
1413  */
1414 int
1415 secpolicy_lock_memory(const cred_t *cr)
1416 {
1417 	return (PRIV_POLICY(cr, PRIV_PROC_LOCK_MEMORY, B_FALSE, EPERM, NULL));
1418 }
1419 
1420 /*
1421  * Accounting (both acct(2) and exacct).
1422  */
1423 int
1424 secpolicy_acct(const cred_t *cr)
1425 {
1426 	return (PRIV_POLICY(cr, PRIV_SYS_ACCT, B_FALSE, EPERM, NULL));
1427 }
1428 
1429 /*
1430  * Is this process privileged to change its uids at will?
1431  * Uid 0 is still considered "special" and having the SETID
1432  * privilege is not sufficient to get uid 0.
1433  * Files are owned by root, so the privilege would give
1434  * full access and euid 0 is still effective.
1435  *
1436  * If you have the privilege and euid 0 only then do you
1437  * get the powers of root wrt uid 0.
1438  *
1439  * For gid manipulations, this is should be called with an
1440  * uid of -1.
1441  *
1442  */
1443 int
1444 secpolicy_allow_setid(const cred_t *cr, uid_t newuid, boolean_t checkonly)
1445 {
1446 	boolean_t allzone = B_FALSE;
1447 
1448 	if (newuid == 0 && cr->cr_uid != 0 && cr->cr_suid != 0 &&
1449 	    cr->cr_ruid != 0) {
1450 		allzone = B_TRUE;
1451 	}
1452 
1453 	return (checkonly ? !PRIV_POLICY_ONLY(cr, PRIV_PROC_SETID, allzone) :
1454 	    PRIV_POLICY(cr, PRIV_PROC_SETID, allzone, EPERM, NULL));
1455 }
1456 
1457 
1458 /*
1459  * Acting on a different process: if the mode is for writing,
1460  * the restrictions are more severe.  This is called after
1461  * we've verified that the uids do not match.
1462  */
1463 int
1464 secpolicy_proc_owner(const cred_t *scr, const cred_t *tcr, int mode)
1465 {
1466 	boolean_t allzone = B_FALSE;
1467 
1468 	if ((mode & VWRITE) && scr->cr_uid != 0 &&
1469 	    (tcr->cr_uid == 0 || tcr->cr_ruid == 0 || tcr->cr_suid == 0))
1470 		allzone = B_TRUE;
1471 
1472 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, allzone, EPERM, NULL));
1473 }
1474 
1475 int
1476 secpolicy_proc_access(const cred_t *scr)
1477 {
1478 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EACCES, NULL));
1479 }
1480 
1481 int
1482 secpolicy_proc_excl_open(const cred_t *scr)
1483 {
1484 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EBUSY, NULL));
1485 }
1486 
1487 int
1488 secpolicy_proc_zone(const cred_t *scr)
1489 {
1490 	return (PRIV_POLICY(scr, PRIV_PROC_ZONE, B_FALSE, EPERM, NULL));
1491 }
1492 
1493 /*
1494  * Destroying the system
1495  */
1496 
1497 int
1498 secpolicy_kmdb(const cred_t *scr)
1499 {
1500 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
1501 }
1502 
1503 int
1504 secpolicy_error_inject(const cred_t *scr)
1505 {
1506 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
1507 }
1508 
1509 /*
1510  * Processor sets, cpu configuration, resource pools.
1511  */
1512 int
1513 secpolicy_pset(const cred_t *cr)
1514 {
1515 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1516 }
1517 
1518 int
1519 secpolicy_ponline(const cred_t *cr)
1520 {
1521 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1522 }
1523 
1524 int
1525 secpolicy_pool(const cred_t *cr)
1526 {
1527 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1528 }
1529 
1530 int
1531 secpolicy_blacklist(const cred_t *cr)
1532 {
1533 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1534 }
1535 
1536 /*
1537  * Catch all system configuration.
1538  */
1539 int
1540 secpolicy_sys_config(const cred_t *cr, boolean_t checkonly)
1541 {
1542 	if (checkonly) {
1543 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_CONFIG, B_FALSE) ? 0 :
1544 		    EPERM);
1545 	} else {
1546 		return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1547 	}
1548 }
1549 
1550 /*
1551  * Zone administration (halt, reboot, etc.) from within zone.
1552  */
1553 int
1554 secpolicy_zone_admin(const cred_t *cr, boolean_t checkonly)
1555 {
1556 	if (checkonly) {
1557 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_ADMIN, B_FALSE) ? 0 :
1558 		    EPERM);
1559 	} else {
1560 		return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM,
1561 		    NULL));
1562 	}
1563 }
1564 
1565 /*
1566  * Zone configuration (create, halt, enter).
1567  */
1568 int
1569 secpolicy_zone_config(const cred_t *cr)
1570 {
1571 	/*
1572 	 * Require all privileges to avoid possibility of privilege
1573 	 * escalation.
1574 	 */
1575 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1576 }
1577 
1578 /*
1579  * Various other system configuration calls
1580  */
1581 int
1582 secpolicy_coreadm(const cred_t *cr)
1583 {
1584 	return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL));
1585 }
1586 
1587 int
1588 secpolicy_systeminfo(const cred_t *cr)
1589 {
1590 	return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL));
1591 }
1592 
1593 int
1594 secpolicy_dispadm(const cred_t *cr)
1595 {
1596 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1597 }
1598 
1599 int
1600 secpolicy_settime(const cred_t *cr)
1601 {
1602 	return (PRIV_POLICY(cr, PRIV_SYS_TIME, B_FALSE, EPERM, NULL));
1603 }
1604 
1605 /*
1606  * For realtime users: high resolution clock.
1607  */
1608 int
1609 secpolicy_clock_highres(const cred_t *cr)
1610 {
1611 	return (PRIV_POLICY(cr, PRIV_PROC_CLOCK_HIGHRES, B_FALSE, EPERM,
1612 	    NULL));
1613 }
1614 
1615 /*
1616  * drv_priv() is documented as callable from interrupt context, not that
1617  * anyone ever does, but still.  No debugging or auditing can be done when
1618  * it is called from interrupt context.
1619  * returns 0 on succes, EPERM on failure.
1620  */
1621 int
1622 drv_priv(cred_t *cr)
1623 {
1624 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1625 }
1626 
1627 int
1628 secpolicy_sys_devices(const cred_t *cr)
1629 {
1630 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1631 }
1632 
1633 int
1634 secpolicy_excl_open(const cred_t *cr)
1635 {
1636 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EBUSY, NULL));
1637 }
1638 
1639 int
1640 secpolicy_rctlsys(const cred_t *cr, boolean_t is_zone_rctl)
1641 {
1642 	/* zone.* rctls can only be set from the global zone */
1643 	if (is_zone_rctl && priv_policy_global(cr) != 0)
1644 		return (EPERM);
1645 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1646 }
1647 
1648 int
1649 secpolicy_resource(const cred_t *cr)
1650 {
1651 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1652 }
1653 
1654 int
1655 secpolicy_resource_anon_mem(const cred_t *cr)
1656 {
1657 	return (PRIV_POLICY_ONLY(cr, PRIV_SYS_RESOURCE, B_FALSE));
1658 }
1659 
1660 /*
1661  * Processes with a real uid of 0 escape any form of accounting, much
1662  * like before.
1663  */
1664 int
1665 secpolicy_newproc(const cred_t *cr)
1666 {
1667 	if (cr->cr_ruid == 0)
1668 		return (0);
1669 
1670 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1671 }
1672 
1673 /*
1674  * Networking
1675  */
1676 int
1677 secpolicy_net_rawaccess(const cred_t *cr)
1678 {
1679 	return (PRIV_POLICY(cr, PRIV_NET_RAWACCESS, B_FALSE, EACCES, NULL));
1680 }
1681 
1682 /*
1683  * Need this privilege for accessing the ICMP device
1684  */
1685 int
1686 secpolicy_net_icmpaccess(const cred_t *cr)
1687 {
1688 	return (PRIV_POLICY(cr, PRIV_NET_ICMPACCESS, B_FALSE, EACCES, NULL));
1689 }
1690 
1691 /*
1692  * There are a few rare cases where the kernel generates ioctls() from
1693  * interrupt context with a credential of kcred rather than NULL.
1694  * In those cases, we take the safe and cheap test.
1695  */
1696 int
1697 secpolicy_net_config(const cred_t *cr, boolean_t checkonly)
1698 {
1699 	if (checkonly) {
1700 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE) ?
1701 		    0 : EPERM);
1702 	} else {
1703 		return (PRIV_POLICY(cr, PRIV_SYS_NET_CONFIG, B_FALSE, EPERM,
1704 		    NULL));
1705 	}
1706 }
1707 
1708 
1709 /*
1710  * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_IP_CONFIG.
1711  *
1712  * There are a few rare cases where the kernel generates ioctls() from
1713  * interrupt context with a credential of kcred rather than NULL.
1714  * In those cases, we take the safe and cheap test.
1715  */
1716 int
1717 secpolicy_ip_config(const cred_t *cr, boolean_t checkonly)
1718 {
1719 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE))
1720 		return (secpolicy_net_config(cr, checkonly));
1721 
1722 	if (checkonly) {
1723 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_IP_CONFIG, B_FALSE) ?
1724 		    0 : EPERM);
1725 	} else {
1726 		return (PRIV_POLICY(cr, PRIV_SYS_IP_CONFIG, B_FALSE, EPERM,
1727 		    NULL));
1728 	}
1729 }
1730 
1731 /*
1732  * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_DL_CONFIG.
1733  */
1734 int
1735 secpolicy_dl_config(const cred_t *cr)
1736 {
1737 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE))
1738 		return (secpolicy_net_config(cr, B_FALSE));
1739 	return (PRIV_POLICY(cr, PRIV_SYS_DL_CONFIG, B_FALSE, EPERM,
1740 	    NULL));
1741 }
1742 
1743 
1744 /*
1745  * Map IP pseudo privileges to actual privileges.
1746  * So we don't need to recompile IP when we change the privileges.
1747  */
1748 int
1749 secpolicy_ip(const cred_t *cr, int netpriv, boolean_t checkonly)
1750 {
1751 	int priv = PRIV_ALL;
1752 
1753 	switch (netpriv) {
1754 	case OP_CONFIG:
1755 		priv = PRIV_SYS_IP_CONFIG;
1756 		break;
1757 	case OP_RAW:
1758 		priv = PRIV_NET_RAWACCESS;
1759 		break;
1760 	case OP_PRIVPORT:
1761 		priv = PRIV_NET_PRIVADDR;
1762 		break;
1763 	}
1764 	ASSERT(priv != PRIV_ALL);
1765 	if (checkonly)
1766 		return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM);
1767 	else
1768 		return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL));
1769 }
1770 
1771 /*
1772  * Map network pseudo privileges to actual privileges.
1773  * So we don't need to recompile IP when we change the privileges.
1774  */
1775 int
1776 secpolicy_net(const cred_t *cr, int netpriv, boolean_t checkonly)
1777 {
1778 	int priv = PRIV_ALL;
1779 
1780 	switch (netpriv) {
1781 	case OP_CONFIG:
1782 		priv = PRIV_SYS_NET_CONFIG;
1783 		break;
1784 	case OP_RAW:
1785 		priv = PRIV_NET_RAWACCESS;
1786 		break;
1787 	case OP_PRIVPORT:
1788 		priv = PRIV_NET_PRIVADDR;
1789 		break;
1790 	}
1791 	ASSERT(priv != PRIV_ALL);
1792 	if (checkonly)
1793 		return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM);
1794 	else
1795 		return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL));
1796 }
1797 
1798 /*
1799  * Checks for operations that are either client-only or are used by
1800  * both clients and servers.
1801  */
1802 int
1803 secpolicy_nfs(const cred_t *cr)
1804 {
1805 	return (PRIV_POLICY(cr, PRIV_SYS_NFS, B_FALSE, EPERM, NULL));
1806 }
1807 
1808 /*
1809  * Special case for opening rpcmod: have NFS privileges or network
1810  * config privileges.
1811  */
1812 int
1813 secpolicy_rpcmod_open(const cred_t *cr)
1814 {
1815 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NFS, B_FALSE))
1816 		return (secpolicy_nfs(cr));
1817 	else
1818 		return (secpolicy_net_config(cr, NULL));
1819 }
1820 
1821 int
1822 secpolicy_chroot(const cred_t *cr)
1823 {
1824 	return (PRIV_POLICY(cr, PRIV_PROC_CHROOT, B_FALSE, EPERM, NULL));
1825 }
1826 
1827 int
1828 secpolicy_tasksys(const cred_t *cr)
1829 {
1830 	return (PRIV_POLICY(cr, PRIV_PROC_TASKID, B_FALSE, EPERM, NULL));
1831 }
1832 
1833 /*
1834  * Basic privilege checks.
1835  */
1836 int
1837 secpolicy_basic_exec(const cred_t *cr, vnode_t *vp)
1838 {
1839 	return (priv_policy_va(cr, PRIV_PROC_EXEC, B_FALSE, EPERM, NULL,
1840 	    KLPDARG_VNODE, vp, (char *)NULL, KLPDARG_NOMORE));
1841 }
1842 
1843 int
1844 secpolicy_basic_fork(const cred_t *cr)
1845 {
1846 	return (PRIV_POLICY(cr, PRIV_PROC_FORK, B_FALSE, EPERM, NULL));
1847 }
1848 
1849 int
1850 secpolicy_basic_proc(const cred_t *cr)
1851 {
1852 	return (PRIV_POLICY(cr, PRIV_PROC_SESSION, B_FALSE, EPERM, NULL));
1853 }
1854 
1855 /*
1856  * Slightly complicated because we don't want to trigger the policy too
1857  * often.  First we shortcircuit access to "self" (tp == sp) or if
1858  * we don't have the privilege but if we have permission
1859  * just return (0) and we don't flag the privilege as needed.
1860  * Else, we test for the privilege because we either have it or need it.
1861  */
1862 int
1863 secpolicy_basic_procinfo(const cred_t *cr, proc_t *tp, proc_t *sp)
1864 {
1865 	if (tp == sp ||
1866 	    !HAS_PRIVILEGE(cr, PRIV_PROC_INFO) && prochasprocperm(tp, sp, cr)) {
1867 		return (0);
1868 	} else {
1869 		return (PRIV_POLICY(cr, PRIV_PROC_INFO, B_FALSE, EPERM, NULL));
1870 	}
1871 }
1872 
1873 int
1874 secpolicy_basic_link(const cred_t *cr)
1875 {
1876 	return (PRIV_POLICY(cr, PRIV_FILE_LINK_ANY, B_FALSE, EPERM, NULL));
1877 }
1878 
1879 /*
1880  * Additional device protection.
1881  *
1882  * Traditionally, a device has specific permissions on the node in
1883  * the filesystem which govern which devices can be opened by what
1884  * processes.  In certain cases, it is desirable to add extra
1885  * restrictions, as writing to certain devices is identical to
1886  * having a complete run of the system.
1887  *
1888  * This mechanism is called the device policy.
1889  *
1890  * When a device is opened, its policy entry is looked up in the
1891  * policy cache and checked.
1892  */
1893 int
1894 secpolicy_spec_open(const cred_t *cr, struct vnode *vp, int oflag)
1895 {
1896 	devplcy_t *plcy;
1897 	int err;
1898 	struct snode *csp = VTOS(common_specvp(vp));
1899 	priv_set_t pset;
1900 
1901 	mutex_enter(&csp->s_lock);
1902 
1903 	if (csp->s_plcy == NULL || csp->s_plcy->dp_gen != devplcy_gen) {
1904 		plcy = devpolicy_find(vp);
1905 		if (csp->s_plcy)
1906 			dpfree(csp->s_plcy);
1907 		csp->s_plcy = plcy;
1908 		ASSERT(plcy != NULL);
1909 	} else
1910 		plcy = csp->s_plcy;
1911 
1912 	if (plcy == nullpolicy) {
1913 		mutex_exit(&csp->s_lock);
1914 		return (0);
1915 	}
1916 
1917 	dphold(plcy);
1918 
1919 	mutex_exit(&csp->s_lock);
1920 
1921 	if (oflag & FWRITE)
1922 		pset = plcy->dp_wrp;
1923 	else
1924 		pset = plcy->dp_rdp;
1925 	/*
1926 	 * Special case:
1927 	 * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_IP_CONFIG.
1928 	 * If PRIV_SYS_NET_CONFIG is present and PRIV_SYS_IP_CONFIG is
1929 	 * required, replace PRIV_SYS_IP_CONFIG with PRIV_SYS_NET_CONFIG
1930 	 * in the required privilege set before doing the check.
1931 	 */
1932 	if (priv_ismember(&pset, PRIV_SYS_IP_CONFIG) &&
1933 	    priv_ismember(&CR_OEPRIV(cr), PRIV_SYS_NET_CONFIG) &&
1934 	    !priv_ismember(&CR_OEPRIV(cr), PRIV_SYS_IP_CONFIG)) {
1935 		priv_delset(&pset, PRIV_SYS_IP_CONFIG);
1936 		priv_addset(&pset, PRIV_SYS_NET_CONFIG);
1937 	}
1938 
1939 	err = secpolicy_require_set(cr, &pset, "devpolicy");
1940 	dpfree(plcy);
1941 
1942 	return (err);
1943 }
1944 
1945 int
1946 secpolicy_modctl(const cred_t *cr, int cmd)
1947 {
1948 	switch (cmd) {
1949 	case MODINFO:
1950 	case MODGETMAJBIND:
1951 	case MODGETPATH:
1952 	case MODGETPATHLEN:
1953 	case MODGETNAME:
1954 	case MODGETFBNAME:
1955 	case MODGETDEVPOLICY:
1956 	case MODGETDEVPOLICYBYNAME:
1957 	case MODDEVT2INSTANCE:
1958 	case MODSIZEOF_DEVID:
1959 	case MODGETDEVID:
1960 	case MODSIZEOF_MINORNAME:
1961 	case MODGETMINORNAME:
1962 	case MODGETDEVFSPATH_LEN:
1963 	case MODGETDEVFSPATH:
1964 	case MODGETDEVFSPATH_MI_LEN:
1965 	case MODGETDEVFSPATH_MI:
1966 		/* Unprivileged */
1967 		return (0);
1968 	case MODLOAD:
1969 	case MODSETDEVPOLICY:
1970 		return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1971 	default:
1972 		return (secpolicy_sys_config(cr, B_FALSE));
1973 	}
1974 }
1975 
1976 int
1977 secpolicy_console(const cred_t *cr)
1978 {
1979 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1980 }
1981 
1982 int
1983 secpolicy_power_mgmt(const cred_t *cr)
1984 {
1985 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1986 }
1987 
1988 /*
1989  * Simulate terminal input; another escalation of privileges avenue.
1990  */
1991 
1992 int
1993 secpolicy_sti(const cred_t *cr)
1994 {
1995 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1996 }
1997 
1998 boolean_t
1999 secpolicy_net_reply_equal(const cred_t *cr)
2000 {
2001 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
2002 }
2003 
2004 int
2005 secpolicy_swapctl(const cred_t *cr)
2006 {
2007 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
2008 }
2009 
2010 int
2011 secpolicy_cpc_cpu(const cred_t *cr)
2012 {
2013 	return (PRIV_POLICY(cr, PRIV_CPC_CPU, B_FALSE, EACCES, NULL));
2014 }
2015 
2016 /*
2017  * secpolicy_contract_identity
2018  *
2019  * Determine if the subject may set the process contract FMRI value
2020  */
2021 int
2022 secpolicy_contract_identity(const cred_t *cr)
2023 {
2024 	return (PRIV_POLICY(cr, PRIV_CONTRACT_IDENTITY, B_FALSE, EPERM, NULL));
2025 }
2026 
2027 /*
2028  * secpolicy_contract_observer
2029  *
2030  * Determine if the subject may observe a specific contract's events.
2031  */
2032 int
2033 secpolicy_contract_observer(const cred_t *cr, struct contract *ct)
2034 {
2035 	if (contract_owned(ct, cr, B_FALSE))
2036 		return (0);
2037 	return (PRIV_POLICY(cr, PRIV_CONTRACT_OBSERVER, B_FALSE, EPERM, NULL));
2038 }
2039 
2040 /*
2041  * secpolicy_contract_observer_choice
2042  *
2043  * Determine if the subject may observe any contract's events.  Just
2044  * tests privilege and audits on success.
2045  */
2046 boolean_t
2047 secpolicy_contract_observer_choice(const cred_t *cr)
2048 {
2049 	return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_OBSERVER, B_FALSE));
2050 }
2051 
2052 /*
2053  * secpolicy_contract_event
2054  *
2055  * Determine if the subject may request critical contract events or
2056  * reliable contract event delivery.
2057  */
2058 int
2059 secpolicy_contract_event(const cred_t *cr)
2060 {
2061 	return (PRIV_POLICY(cr, PRIV_CONTRACT_EVENT, B_FALSE, EPERM, NULL));
2062 }
2063 
2064 /*
2065  * secpolicy_contract_event_choice
2066  *
2067  * Determine if the subject may retain contract events in its critical
2068  * set when a change in other terms would normally require a change in
2069  * the critical set.  Just tests privilege and audits on success.
2070  */
2071 boolean_t
2072 secpolicy_contract_event_choice(const cred_t *cr)
2073 {
2074 	return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_EVENT, B_FALSE));
2075 }
2076 
2077 /*
2078  * secpolicy_gart_access
2079  *
2080  * Determine if the subject has sufficient priveleges to make ioctls to agpgart
2081  * device.
2082  */
2083 int
2084 secpolicy_gart_access(const cred_t *cr)
2085 {
2086 	return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM, NULL));
2087 }
2088 
2089 /*
2090  * secpolicy_gart_map
2091  *
2092  * Determine if the subject has sufficient priveleges to map aperture range
2093  * through agpgart driver.
2094  */
2095 int
2096 secpolicy_gart_map(const cred_t *cr)
2097 {
2098 	if (PRIV_POLICY_ONLY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE)) {
2099 		return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM,
2100 		    NULL));
2101 	} else {
2102 		return (PRIV_POLICY(cr, PRIV_GRAPHICS_MAP, B_FALSE, EPERM,
2103 		    NULL));
2104 	}
2105 }
2106 
2107 /*
2108  * secpolicy_zinject
2109  *
2110  * Determine if the subject can inject faults in the ZFS fault injection
2111  * framework.  Requires all privileges.
2112  */
2113 int
2114 secpolicy_zinject(const cred_t *cr)
2115 {
2116 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
2117 }
2118 
2119 /*
2120  * secpolicy_zfs
2121  *
2122  * Determine if the subject has permission to manipulate ZFS datasets
2123  * (not pools).  Equivalent to the SYS_MOUNT privilege.
2124  */
2125 int
2126 secpolicy_zfs(const cred_t *cr)
2127 {
2128 	return (PRIV_POLICY(cr, PRIV_SYS_MOUNT, B_FALSE, EPERM, NULL));
2129 }
2130 
2131 /*
2132  * secpolicy_idmap
2133  *
2134  * Determine if the calling process has permissions to register an SID
2135  * mapping daemon and allocate ephemeral IDs.
2136  */
2137 int
2138 secpolicy_idmap(const cred_t *cr)
2139 {
2140 	return (PRIV_POLICY(cr, PRIV_FILE_SETID, B_TRUE, EPERM, NULL));
2141 }
2142 
2143 /*
2144  * secpolicy_ucode_update
2145  *
2146  * Determine if the subject has sufficient privilege to update microcode.
2147  */
2148 int
2149 secpolicy_ucode_update(const cred_t *scr)
2150 {
2151 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
2152 }
2153 
2154 /*
2155  * secpolicy_sadopen
2156  *
2157  * Determine if the subject has sufficient privilege to access /dev/sad/admin.
2158  * /dev/sad/admin appear in global zone and exclusive-IP zones only.
2159  * In global zone, sys_config is required.
2160  * In exclusive-IP zones, sys_ip_config is required.
2161  * Note that sys_config is prohibited in non-global zones.
2162  */
2163 int
2164 secpolicy_sadopen(const cred_t *credp)
2165 {
2166 	priv_set_t pset;
2167 
2168 	priv_emptyset(&pset);
2169 
2170 	if (crgetzoneid(credp) == GLOBAL_ZONEID)
2171 		priv_addset(&pset, PRIV_SYS_CONFIG);
2172 	else
2173 		priv_addset(&pset, PRIV_SYS_IP_CONFIG);
2174 
2175 	return (secpolicy_require_set(credp, &pset, "devpolicy"));
2176 }
2177 
2178 
2179 /*
2180  * Add privileges to a particular privilege set; this is called when the
2181  * current sets of privileges are not sufficient.  I.e., we should always
2182  * call the policy override functions from here.
2183  * What we are allowed to have is in the Observed Permitted set; so
2184  * we compute the difference between that and the newset.
2185  */
2186 int
2187 secpolicy_require_privs(const cred_t *cr, const priv_set_t *nset)
2188 {
2189 	priv_set_t rqd;
2190 
2191 	rqd = CR_OPPRIV(cr);
2192 
2193 	priv_inverse(&rqd);
2194 	priv_intersect(nset, &rqd);
2195 
2196 	return (secpolicy_require_set(cr, &rqd, NULL));
2197 }
2198 
2199 /*
2200  * secpolicy_smb
2201  *
2202  * Determine if the cred_t has PRIV_SYS_SMB privilege, indicating
2203  * that it has permission to access the smbsrv kernel driver.
2204  * PRIV_POLICY checks the privilege and audits the check.
2205  *
2206  * Returns:
2207  * 0       Driver access is allowed.
2208  * EPERM   Driver access is NOT permitted.
2209  */
2210 int
2211 secpolicy_smb(const cred_t *cr)
2212 {
2213 	return (PRIV_POLICY(cr, PRIV_SYS_SMB, B_FALSE, EPERM, NULL));
2214 }
2215 
2216 /*
2217  * secpolicy_vscan
2218  *
2219  * Determine if cred_t has the necessary privileges to access a file
2220  * for virus scanning and update its extended system attributes.
2221  * PRIV_FILE_DAC_SEARCH, PRIV_FILE_DAC_READ - file access
2222  * PRIV_FILE_FLAG_SET - set extended system attributes
2223  *
2224  * PRIV_POLICY checks the privilege and audits the check.
2225  *
2226  * Returns:
2227  * 0      file access for virus scanning allowed.
2228  * EPERM  file access for virus scanning is NOT permitted.
2229  */
2230 int
2231 secpolicy_vscan(const cred_t *cr)
2232 {
2233 	if ((PRIV_POLICY(cr, PRIV_FILE_DAC_SEARCH, B_FALSE, EPERM, NULL)) ||
2234 	    (PRIV_POLICY(cr, PRIV_FILE_DAC_READ, B_FALSE, EPERM, NULL)) ||
2235 	    (PRIV_POLICY(cr, PRIV_FILE_FLAG_SET, B_FALSE, EPERM, NULL))) {
2236 		return (EPERM);
2237 	}
2238 
2239 	return (0);
2240 }
2241 
2242 /*
2243  * secpolicy_smbfs_login
2244  *
2245  * Determines if the caller can add and delete the smbfs login
2246  * password in the the nsmb kernel module for the CIFS client.
2247  *
2248  * Returns:
2249  * 0       access is allowed.
2250  * EPERM   access is NOT allowed.
2251  */
2252 int
2253 secpolicy_smbfs_login(const cred_t *cr, uid_t uid)
2254 {
2255 	uid_t cruid = crgetruid(cr);
2256 
2257 	if (cruid == uid)
2258 		return (0);
2259 	return (PRIV_POLICY(cr, PRIV_PROC_OWNER, B_FALSE,
2260 	    EPERM, NULL));
2261 }
2262 
2263 /*
2264  * secpolicy_xvm_control
2265  *
2266  * Determines if a caller can control the xVM hypervisor and/or running
2267  * domains (x86 specific).
2268  *
2269  * Returns:
2270  * 0       access is allowed.
2271  * EPERM   access is NOT allowed.
2272  */
2273 int
2274 secpolicy_xvm_control(const cred_t *cr)
2275 {
2276 	if (PRIV_POLICY(cr, PRIV_XVM_CONTROL, B_FALSE, EPERM, NULL))
2277 		return (EPERM);
2278 	return (0);
2279 }
2280 
2281 /*
2282  * secpolicy_dld_ioctl
2283  *
2284  * Determine if the subject has permission to use certain dld ioctls.
2285  * Each ioctl should require a limited number of privileges. A large
2286  * number indicates a poor design.
2287  */
2288 int
2289 secpolicy_dld_ioctl(const cred_t *cr, const char *dld_priv, const char *msg)
2290 {
2291 	int rv;
2292 
2293 	if ((rv = priv_getbyname(dld_priv, 0)) >= 0) {
2294 		return (PRIV_POLICY(cr, rv, B_FALSE, EPERM, msg));
2295 	}
2296 	/* priv_getbyname() returns -ve errno */
2297 	return (-rv);
2298 
2299 }
2300 
2301 /*
2302  * secpolicy_ppp_config
2303  *
2304  * Determine if the subject has sufficient privileges to configure PPP and
2305  * PPP-related devices.
2306  */
2307 int
2308 secpolicy_ppp_config(const cred_t *cr)
2309 {
2310 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE))
2311 		return (secpolicy_net_config(cr, B_FALSE));
2312 	return (PRIV_POLICY(cr, PRIV_SYS_PPP_CONFIG, B_FALSE, EPERM, NULL));
2313 }
2314