xref: /titanic_44/usr/src/uts/common/io/openprom.c (revision ee0eb9f2d12b8a03b5a193cd667735c1962e0c7b)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 #pragma ident	"%Z%%M%	%I%	%E% SMI"	/* SVr4 */
26 
27 /*
28  * Ported from 4.1.1_PSRA: "@(#)openprom.c 1.19 91/02/19 SMI";
29  *
30  * Porting notes:
31  *
32  * OPROMU2P unsupported after SunOS 4.x.
33  *
34  * Only one of these devices per system is allowed.
35  */
36 
37 /*
38  * Openprom eeprom options/devinfo driver.
39  */
40 
41 #include <sys/types.h>
42 #include <sys/errno.h>
43 #include <sys/file.h>
44 #include <sys/cmn_err.h>
45 #include <sys/kmem.h>
46 #include <sys/openpromio.h>
47 #include <sys/conf.h>
48 #include <sys/stat.h>
49 #include <sys/modctl.h>
50 #include <sys/debug.h>
51 #include <sys/autoconf.h>
52 #include <sys/ddi.h>
53 #include <sys/sunddi.h>
54 #include <sys/promif.h>
55 #include <sys/sysmacros.h>	/* offsetof */
56 #include <sys/nvpair.h>
57 #include <sys/wanboot_impl.h>
58 #include <sys/zone.h>
59 
60 #define	MAX_OPENS	32	/* Up to this many simultaneous opens */
61 
62 #define	IOC_IDLE	0	/* snapshot ioctl states */
63 #define	IOC_SNAP	1	/* snapshot in progress */
64 #define	IOC_DONE	2	/* snapshot done, but not copied out */
65 #define	IOC_COPY	3	/* copyout in progress */
66 
67 extern int plat_stdout_is_framebuffer(void);
68 extern int plat_stdin_is_keyboard(void);
69 
70 /*
71  * XXX	Make this dynamic.. or (better still) make the interface stateless
72  */
73 static struct oprom_state {
74 	pnode_t	current_id;	/* node we're fetching props from */
75 	int16_t	already_open;	/* if true, this instance is 'active' */
76 	int16_t	ioc_state;	/* snapshot ioctl state */
77 	char	*snapshot;	/* snapshot of all prom nodes */
78 	size_t	size;		/* size of snapshot */
79 	prom_generation_cookie_t tree_gen;
80 } oprom_state[MAX_OPENS];
81 
82 static kmutex_t oprom_lock;	/* serialize instance assignment */
83 
84 static int opromopen(dev_t *, int, int, cred_t *);
85 static int opromioctl(dev_t, int, intptr_t, int, cred_t *, int *);
86 static int opromclose(dev_t, int, int, cred_t *);
87 
88 static int opinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
89 		void **result);
90 static int opattach(dev_info_t *, ddi_attach_cmd_t cmd);
91 static int opdetach(dev_info_t *, ddi_detach_cmd_t cmd);
92 
93 /* help functions */
94 static int oprom_checknodeid(pnode_t, pnode_t);
95 static int oprom_copyinstr(intptr_t, char *, size_t, size_t);
96 static int oprom_copynode(pnode_t, uint_t, char **, size_t *);
97 static int oprom_snapshot(struct oprom_state *, intptr_t);
98 static int oprom_copyout(struct oprom_state *, intptr_t);
99 static int oprom_setstate(struct oprom_state *, int16_t);
100 
101 static struct cb_ops openeepr_cb_ops = {
102 	opromopen,		/* open */
103 	opromclose,		/* close */
104 	nodev,			/* strategy */
105 	nodev,			/* print */
106 	nodev,			/* dump */
107 	nodev,			/* read */
108 	nodev,			/* write */
109 	opromioctl,		/* ioctl */
110 	nodev,			/* devmap */
111 	nodev,			/* mmap */
112 	nodev,			/* segmap */
113 	nochpoll,		/* poll */
114 	ddi_prop_op,		/* prop_op */
115 	NULL,			/* streamtab  */
116 	D_NEW | D_MP		/* Driver compatibility flag */
117 };
118 
119 static struct dev_ops openeepr_ops = {
120 	DEVO_REV,		/* devo_rev, */
121 	0,			/* refcnt  */
122 	opinfo,			/* info */
123 	nulldev,		/* identify */
124 	nulldev,		/* probe */
125 	opattach,		/* attach */
126 	opdetach,		/* detach */
127 	nodev,			/* reset */
128 	&openeepr_cb_ops,	/* driver operations */
129 	NULL			/* bus operations */
130 };
131 
132 /*
133  * Module linkage information for the kernel.
134  */
135 static struct modldrv modldrv = {
136 	&mod_driverops,
137 	"OPENPROM/NVRAM Driver v%I%",
138 	&openeepr_ops
139 };
140 
141 static struct modlinkage modlinkage = {
142 	MODREV_1,
143 	&modldrv,
144 	NULL
145 };
146 
147 int
148 _init(void)
149 {
150 	int	error;
151 
152 	mutex_init(&oprom_lock, NULL, MUTEX_DRIVER, NULL);
153 
154 	error = mod_install(&modlinkage);
155 	if (error != 0) {
156 		mutex_destroy(&oprom_lock);
157 		return (error);
158 	}
159 
160 	return (0);
161 }
162 
163 int
164 _info(struct modinfo *modinfop)
165 {
166 	return (mod_info(&modlinkage, modinfop));
167 }
168 
169 int
170 _fini(void)
171 {
172 	int	error;
173 
174 	error = mod_remove(&modlinkage);
175 	if (error != 0)
176 		return (error);
177 
178 	mutex_destroy(&oprom_lock);
179 	return (0);
180 }
181 
182 static dev_info_t *opdip;
183 static pnode_t options_nodeid;
184 
185 /*ARGSUSED*/
186 static int
187 opinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
188 {
189 	int error = DDI_FAILURE;
190 
191 	switch (infocmd) {
192 	case DDI_INFO_DEVT2DEVINFO:
193 		*result = (void *)opdip;
194 		error = DDI_SUCCESS;
195 		break;
196 	case DDI_INFO_DEVT2INSTANCE:
197 		/* All dev_t's map to the same, single instance */
198 		*result = (void *)0;
199 		error = DDI_SUCCESS;
200 		break;
201 	default:
202 		break;
203 	}
204 
205 	return (error);
206 }
207 
208 static int
209 opattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
210 {
211 	switch (cmd) {
212 
213 	case DDI_ATTACH:
214 		if (prom_is_openprom()) {
215 			options_nodeid = prom_optionsnode();
216 		} else {
217 			options_nodeid = OBP_BADNODE;
218 		}
219 
220 		opdip = dip;
221 
222 		if (ddi_create_minor_node(dip, "openprom", S_IFCHR,
223 		    0, DDI_PSEUDO, NULL) == DDI_FAILURE) {
224 			return (DDI_FAILURE);
225 		}
226 
227 		return (DDI_SUCCESS);
228 
229 	default:
230 		return (DDI_FAILURE);
231 	}
232 }
233 
234 static int
235 opdetach(dev_info_t *dip, ddi_detach_cmd_t cmd)
236 {
237 	if (cmd != DDI_DETACH)
238 		return (DDI_FAILURE);
239 
240 	ddi_remove_minor_node(dip, NULL);
241 	opdip = NULL;
242 
243 	return (DDI_SUCCESS);
244 }
245 
246 /*
247  * Allow multiple opens by tweaking the dev_t such that it looks like each
248  * open is getting a different minor device.  Each minor gets a separate
249  * entry in the oprom_state[] table.
250  */
251 /*ARGSUSED*/
252 static int
253 opromopen(dev_t *devp, int flag, int otyp, cred_t *credp)
254 {
255 	int m;
256 	struct oprom_state *st = oprom_state;
257 
258 	if (getminor(*devp) != 0)
259 		return (ENXIO);
260 
261 	mutex_enter(&oprom_lock);
262 	for (m = 0; m < MAX_OPENS; m++)
263 		if (st->already_open)
264 			st++;
265 		else {
266 			st->already_open = 1;
267 			/*
268 			 * It's ours.
269 			 */
270 			st->current_id = (pnode_t)0;
271 			ASSERT(st->snapshot == NULL && st->size == 0);
272 			ASSERT(st->ioc_state == IOC_IDLE);
273 			break;
274 		}
275 	mutex_exit(&oprom_lock);
276 
277 	if (m == MAX_OPENS)  {
278 		/*
279 		 * "Thank you for calling, but all our lines are
280 		 * busy at the moment.."
281 		 *
282 		 * We could get sophisticated here, and go into a
283 		 * sleep-retry loop .. but hey, I just can't see
284 		 * that many processes sitting in this driver.
285 		 *
286 		 * (And if it does become possible, then we should
287 		 * change the interface so that the 'state' is held
288 		 * external to the driver)
289 		 */
290 		return (EAGAIN);
291 	}
292 
293 	*devp = makedevice(getmajor(*devp), (minor_t)m);
294 
295 	return (0);
296 }
297 
298 /*ARGSUSED*/
299 static int
300 opromclose(dev_t dev, int flag, int otype, cred_t *cred_p)
301 {
302 	struct oprom_state *st;
303 
304 	st = &oprom_state[getminor(dev)];
305 	ASSERT(getminor(dev) < MAX_OPENS && st->already_open != 0);
306 	if (st->snapshot) {
307 		kmem_free(st->snapshot, st->size);
308 		st->snapshot = NULL;
309 		st->size = 0;
310 		st->ioc_state = IOC_IDLE;
311 	}
312 	mutex_enter(&oprom_lock);
313 	st->already_open = 0;
314 	mutex_exit(&oprom_lock);
315 
316 	return (0);
317 }
318 
319 struct opromioctl_args {
320 	struct oprom_state *st;
321 	int cmd;
322 	intptr_t arg;
323 	int mode;
324 };
325 
326 /*ARGSUSED*/
327 static int
328 opromioctl_cb(void *avp, int has_changed)
329 {
330 	struct opromioctl_args *argp = avp;
331 	int cmd;
332 	intptr_t arg;
333 	int mode;
334 	struct oprom_state *st;
335 	struct openpromio *opp;
336 	int valsize;
337 	char *valbuf;
338 	int error = 0;
339 	uint_t userbufsize;
340 	pnode_t node_id;
341 	char propname[OBP_MAXPROPNAME];
342 
343 	st = argp->st;
344 	cmd = argp->cmd;
345 	arg = argp->arg;
346 	mode = argp->mode;
347 
348 	if (has_changed) {
349 		/*
350 		 * The prom tree has changed since we last used current_id,
351 		 * so we need to check it.
352 		 */
353 		if ((st->current_id != OBP_NONODE) &&
354 		    (st->current_id != OBP_BADNODE)) {
355 			if (oprom_checknodeid(st->current_id, OBP_NONODE) == 0)
356 				st->current_id = OBP_BADNODE;
357 		}
358 	}
359 
360 	/*
361 	 * Check permissions
362 	 * and weed out unsupported commands on x86 platform
363 	 */
364 	switch (cmd) {
365 #if !defined(__i386) && !defined(__amd64)
366 	case OPROMLISTKEYSLEN:
367 		valsize = prom_asr_list_keys_len();
368 		opp = (struct openpromio *)kmem_zalloc(
369 		    sizeof (uint_t) + 1, KM_SLEEP);
370 		opp->oprom_size = valsize;
371 		if (copyout(opp, (void *)arg, (sizeof (uint_t))) != 0)
372 			error = EFAULT;
373 		kmem_free(opp, sizeof (uint_t) + 1);
374 		break;
375 	case OPROMLISTKEYS:
376 		valsize = prom_asr_list_keys_len();
377 		if (copyin((void *)arg, &userbufsize, sizeof (uint_t)) != 0)
378 			return (EFAULT);
379 		if (valsize > userbufsize)
380 			return (EINVAL);
381 		valbuf = (char *)kmem_zalloc(valsize + 1, KM_SLEEP);
382 		if (prom_asr_list_keys((caddr_t)valbuf) == -1) {
383 			kmem_free(valbuf, valsize + 1);
384 			return (EFAULT);
385 		}
386 		opp = (struct openpromio *)kmem_zalloc(
387 		    valsize + sizeof (uint_t) + 1, KM_SLEEP);
388 		opp->oprom_size = valsize;
389 		bcopy(valbuf, opp->oprom_array, valsize);
390 		if (copyout(opp, (void *)arg, (valsize + sizeof (uint_t))) != 0)
391 			error = EFAULT;
392 		kmem_free(valbuf, valsize + 1);
393 		kmem_free(opp, valsize + sizeof (uint_t) + 1);
394 		break;
395 	case OPROMEXPORT:
396 		valsize = prom_asr_export_len();
397 		if (copyin((void *)arg, &userbufsize, sizeof (uint_t)) != 0)
398 			return (EFAULT);
399 		if (valsize > userbufsize)
400 			return (EINVAL);
401 		valbuf = (char *)kmem_zalloc(valsize + 1, KM_SLEEP);
402 		if (prom_asr_export((caddr_t)valbuf) == -1) {
403 			kmem_free(valbuf, valsize + 1);
404 			return (EFAULT);
405 		}
406 		opp = (struct openpromio *)kmem_zalloc(
407 		    valsize + sizeof (uint_t) + 1, KM_SLEEP);
408 		opp->oprom_size = valsize;
409 		bcopy(valbuf, opp->oprom_array, valsize);
410 		if (copyout(opp, (void *)arg, (valsize + sizeof (uint_t))) != 0)
411 			error = EFAULT;
412 		kmem_free(valbuf, valsize + 1);
413 		kmem_free(opp, valsize + sizeof (uint_t) + 1);
414 		break;
415 	case OPROMEXPORTLEN:
416 		valsize = prom_asr_export_len();
417 		opp = (struct openpromio *)kmem_zalloc(
418 		    sizeof (uint_t) + 1, KM_SLEEP);
419 		opp->oprom_size = valsize;
420 		if (copyout(opp, (void *)arg, (sizeof (uint_t))) != 0)
421 			error = EFAULT;
422 		kmem_free(opp, sizeof (uint_t) + 1);
423 		break;
424 #endif
425 	case OPROMGETOPT:
426 	case OPROMNXTOPT:
427 		if ((mode & FREAD) == 0) {
428 			return (EPERM);
429 		}
430 		node_id = options_nodeid;
431 		break;
432 
433 	case OPROMSETOPT:
434 	case OPROMSETOPT2:
435 #if !defined(__i386) && !defined(__amd64)
436 		if (mode & FWRITE) {
437 			node_id = options_nodeid;
438 			break;
439 		}
440 #endif /* !__i386 && !__amd64 */
441 		return (EPERM);
442 
443 	case OPROMNEXT:
444 	case OPROMCHILD:
445 	case OPROMGETPROP:
446 	case OPROMGETPROPLEN:
447 	case OPROMNXTPROP:
448 	case OPROMSETNODEID:
449 		if ((mode & FREAD) == 0) {
450 			return (EPERM);
451 		}
452 		node_id = st->current_id;
453 		break;
454 	case OPROMCOPYOUT:
455 		if (st->snapshot == NULL)
456 			return (EINVAL);
457 		/*FALLTHROUGH*/
458 	case OPROMSNAPSHOT:
459 	case OPROMGETCONS:
460 	case OPROMGETBOOTARGS:
461 	case OPROMGETVERSION:
462 	case OPROMPATH2DRV:
463 	case OPROMPROM2DEVNAME:
464 #if !defined(__i386) && !defined(__amd64)
465 	case OPROMGETFBNAME:
466 	case OPROMDEV2PROMNAME:
467 	case OPROMREADY64:
468 #endif	/* !__i386 && !__amd64 */
469 		if ((mode & FREAD) == 0) {
470 			return (EPERM);
471 		}
472 		break;
473 
474 #if !defined(__i386) && !defined(__amd64)
475 	case WANBOOT_SETKEY:
476 		if (!(mode & FWRITE))
477 			return (EPERM);
478 		break;
479 #endif	/* !__i386 && !defined(__amd64) */
480 
481 	default:
482 		return (EINVAL);
483 	}
484 
485 	/*
486 	 * Deal with SNAPSHOT and COPYOUT ioctls first
487 	 */
488 	switch (cmd) {
489 	case OPROMCOPYOUT:
490 		return (oprom_copyout(st, arg));
491 
492 	case OPROMSNAPSHOT:
493 		return (oprom_snapshot(st, arg));
494 	}
495 
496 	/*
497 	 * Copy in user argument length and allocation memory
498 	 *
499 	 * NB do not copyin the entire buffer we may not need
500 	 *	to. userbufsize can be as big as 32 K.
501 	 */
502 	if (copyin((void *)arg, &userbufsize, sizeof (uint_t)) != 0)
503 		return (EFAULT);
504 
505 	if (userbufsize == 0 || userbufsize > OPROMMAXPARAM)
506 		return (EINVAL);
507 
508 	opp = (struct openpromio *)kmem_zalloc(
509 	    userbufsize + sizeof (uint_t) + 1, KM_SLEEP);
510 
511 	/*
512 	 * Execute command
513 	 */
514 	switch (cmd) {
515 
516 	case OPROMGETOPT:
517 	case OPROMGETPROP:
518 	case OPROMGETPROPLEN:
519 
520 		if ((prom_is_openprom() == 0) ||
521 		    (node_id == OBP_NONODE) || (node_id == OBP_BADNODE)) {
522 			error = EINVAL;
523 			break;
524 		}
525 
526 		/*
527 		 * The argument, a NULL terminated string, is a prop name.
528 		 */
529 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
530 		    (size_t)userbufsize, OBP_MAXPROPNAME)) != 0) {
531 			break;
532 		}
533 		(void) strcpy(propname, opp->oprom_array);
534 		valsize = prom_getproplen(node_id, propname);
535 
536 		/*
537 		 * 4010173: 'name' is a property, but not an option.
538 		 */
539 		if ((cmd == OPROMGETOPT) && (strcmp("name", propname) == 0))
540 			valsize = -1;
541 
542 		if (cmd == OPROMGETPROPLEN)  {
543 			int proplen = valsize;
544 
545 			if (userbufsize < sizeof (int)) {
546 				error = EINVAL;
547 				break;
548 			}
549 			opp->oprom_size = valsize = sizeof (int);
550 			bcopy(&proplen, opp->oprom_array, valsize);
551 		} else if (valsize > 0 && valsize <= userbufsize) {
552 			bzero(opp->oprom_array, valsize + 1);
553 			(void) prom_getprop(node_id, propname,
554 			    opp->oprom_array);
555 			opp->oprom_size = valsize;
556 			if (valsize < userbufsize)
557 				++valsize;	/* Forces NULL termination */
558 						/* If space permits */
559 		} else {
560 			/*
561 			 * XXX: There is no error code if the buf is too small.
562 			 * which is consistent with the current behavior.
563 			 *
564 			 * NB: This clause also handles the non-error
565 			 * zero length (boolean) property value case.
566 			 */
567 			opp->oprom_size = 0;
568 			(void) strcpy(opp->oprom_array, "");
569 			valsize = 1;
570 		}
571 		if (copyout(opp, (void *)arg, (valsize + sizeof (uint_t))) != 0)
572 			error = EFAULT;
573 		break;
574 
575 	case OPROMNXTOPT:
576 	case OPROMNXTPROP:
577 		if ((prom_is_openprom() == 0) ||
578 		    (node_id == OBP_NONODE) || (node_id == OBP_BADNODE)) {
579 			error = EINVAL;
580 			break;
581 		}
582 
583 		/*
584 		 * The argument, a NULL terminated string, is a prop name.
585 		 */
586 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
587 		    (size_t)userbufsize, OBP_MAXPROPNAME)) != 0) {
588 			break;
589 		}
590 		valbuf = (char *)prom_nextprop(node_id, opp->oprom_array,
591 		    propname);
592 		valsize = strlen(valbuf);
593 
594 		/*
595 		 * 4010173: 'name' is a property, but it's not an option.
596 		 */
597 		if ((cmd == OPROMNXTOPT) && valsize &&
598 		    (strcmp(valbuf, "name") == 0)) {
599 			valbuf = (char *)prom_nextprop(node_id, "name",
600 			    propname);
601 			valsize = strlen(valbuf);
602 		}
603 
604 		if (valsize == 0) {
605 			opp->oprom_size = 0;
606 		} else if (++valsize <= userbufsize) {
607 			opp->oprom_size = valsize;
608 			bzero((caddr_t)opp->oprom_array, (size_t)valsize);
609 			bcopy((caddr_t)valbuf, (caddr_t)opp->oprom_array,
610 			    (size_t)valsize);
611 		}
612 
613 		if (copyout(opp, (void *)arg, valsize + sizeof (uint_t)) != 0)
614 			error = EFAULT;
615 		break;
616 
617 	case OPROMNEXT:
618 	case OPROMCHILD:
619 	case OPROMSETNODEID:
620 
621 		if (prom_is_openprom() == 0 ||
622 		    userbufsize < sizeof (pnode_t)) {
623 			error = EINVAL;
624 			break;
625 		}
626 
627 		/*
628 		 * The argument is a phandle. (aka pnode_t)
629 		 */
630 		if (copyin(((caddr_t)arg + sizeof (uint_t)),
631 		    opp->oprom_array, sizeof (pnode_t)) != 0) {
632 			error = EFAULT;
633 			break;
634 		}
635 
636 		/*
637 		 * If pnode_t from userland is garbage, we
638 		 * could confuse the PROM.
639 		 */
640 		node_id = *(pnode_t *)opp->oprom_array;
641 		if (oprom_checknodeid(node_id, st->current_id) == 0) {
642 			cmn_err(CE_NOTE, "!nodeid 0x%x not found",
643 			    (int)node_id);
644 			error = EINVAL;
645 			break;
646 		}
647 
648 		if (cmd == OPROMNEXT)
649 			st->current_id = prom_nextnode(node_id);
650 		else if (cmd == OPROMCHILD)
651 			st->current_id = prom_childnode(node_id);
652 		else {
653 			/* OPROMSETNODEID */
654 			st->current_id = node_id;
655 			break;
656 		}
657 
658 		opp->oprom_size = sizeof (pnode_t);
659 		*(pnode_t *)opp->oprom_array = st->current_id;
660 
661 		if (copyout(opp, (void *)arg,
662 		    sizeof (pnode_t) + sizeof (uint_t)) != 0)
663 			error = EFAULT;
664 		break;
665 
666 	case OPROMGETCONS:
667 		/*
668 		 * Is openboot supported on this machine?
669 		 * This ioctl used to return the console device,
670 		 * information; this is now done via modctl()
671 		 * in libdevinfo.
672 		 */
673 		opp->oprom_size = sizeof (char);
674 
675 		opp->oprom_array[0] |= prom_is_openprom() ?
676 		    OPROMCONS_OPENPROM : 0;
677 
678 		/*
679 		 * The rest of the info is needed by Install to
680 		 * decide if graphics should be started.
681 		 */
682 		if ((getzoneid() == GLOBAL_ZONEID) &&
683 		    plat_stdin_is_keyboard()) {
684 			opp->oprom_array[0] |= OPROMCONS_STDIN_IS_KBD;
685 		}
686 
687 		if ((getzoneid() == GLOBAL_ZONEID) &&
688 		    plat_stdout_is_framebuffer()) {
689 			opp->oprom_array[0] |= OPROMCONS_STDOUT_IS_FB;
690 		}
691 
692 		if (copyout(opp, (void *)arg,
693 		    sizeof (char) + sizeof (uint_t)) != 0)
694 			error = EFAULT;
695 		break;
696 
697 	case OPROMGETBOOTARGS: {
698 		extern char kern_bootargs[];
699 
700 		valsize = strlen(kern_bootargs) + 1;
701 		if (valsize > userbufsize) {
702 			error = EINVAL;
703 			break;
704 		}
705 		(void) strcpy(opp->oprom_array, kern_bootargs);
706 		opp->oprom_size = valsize - 1;
707 
708 		if (copyout(opp, (void *)arg, valsize + sizeof (uint_t)) != 0)
709 			error = EFAULT;
710 		break;
711 	}
712 
713 	/*
714 	 * convert a prom device path to an equivalent devfs path
715 	 */
716 	case OPROMPROM2DEVNAME: {
717 		char *dev_name;
718 
719 		/*
720 		 * The input argument, a pathname, is a NULL terminated string.
721 		 */
722 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
723 		    (size_t)userbufsize, MAXPATHLEN)) != 0) {
724 			break;
725 		}
726 
727 		dev_name = kmem_alloc(MAXPATHLEN, KM_SLEEP);
728 
729 		error = i_promname_to_devname(opp->oprom_array, dev_name);
730 		if (error != 0) {
731 			kmem_free(dev_name, MAXPATHLEN);
732 			break;
733 		}
734 		valsize = opp->oprom_size = strlen(dev_name);
735 		if (++valsize > userbufsize) {
736 			kmem_free(dev_name, MAXPATHLEN);
737 			error = EINVAL;
738 			break;
739 		}
740 		(void) strcpy(opp->oprom_array, dev_name);
741 		if (copyout(opp, (void *)arg, sizeof (uint_t) + valsize) != 0)
742 			error = EFAULT;
743 
744 		kmem_free(dev_name, MAXPATHLEN);
745 		break;
746 	}
747 
748 	/*
749 	 * Convert a prom device path name to a driver name
750 	 */
751 	case OPROMPATH2DRV: {
752 		char *drv_name;
753 		major_t maj;
754 
755 		/*
756 		 * The input argument, a pathname, is a NULL terminated string.
757 		 */
758 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
759 		    (size_t)userbufsize, MAXPATHLEN)) != 0) {
760 			break;
761 		}
762 
763 		/*
764 		 * convert path to a driver binding name
765 		 */
766 		maj = path_to_major((char *)opp->oprom_array);
767 		if (maj == DDI_MAJOR_T_NONE) {
768 			error = EINVAL;
769 			break;
770 		}
771 
772 		/*
773 		 * resolve any aliases
774 		 */
775 		if ((drv_name = ddi_major_to_name(maj)) == NULL) {
776 			error = EINVAL;
777 			break;
778 		}
779 
780 		(void) strcpy(opp->oprom_array, drv_name);
781 		opp->oprom_size = strlen(drv_name);
782 		if (copyout(opp, (void *)arg,
783 		    sizeof (uint_t) + opp->oprom_size + 1) != 0)
784 			error = EFAULT;
785 		break;
786 	}
787 
788 	case OPROMGETVERSION:
789 		/*
790 		 * Get a string representing the running version of the
791 		 * prom. How to create such a string is platform dependent,
792 		 * so we just defer to a promif function. If no such
793 		 * association exists, the promif implementation
794 		 * may copy the string "unknown" into the given buffer,
795 		 * and return its length (incl. NULL terminator).
796 		 *
797 		 * We expect prom_version_name to return the actual
798 		 * length of the string, but copy at most userbufsize
799 		 * bytes into the given buffer, including NULL termination.
800 		 */
801 
802 		valsize = prom_version_name(opp->oprom_array, userbufsize);
803 		if (valsize < 0) {
804 			error = EINVAL;
805 			break;
806 		}
807 
808 		/*
809 		 * copyout only the part of the user buffer we need to.
810 		 */
811 		if (copyout(opp, (void *)arg,
812 		    (size_t)(min((uint_t)valsize, userbufsize) +
813 		    sizeof (uint_t))) != 0)
814 			error = EFAULT;
815 		break;
816 
817 #if !defined(__i386) && !defined(__amd64)
818 	case OPROMGETFBNAME:
819 		/*
820 		 * Return stdoutpath, if it's a frame buffer.
821 		 * Yes, we are comparing a possibly longer string against
822 		 * the size we're really going to copy, but so what?
823 		 */
824 		if ((getzoneid() == GLOBAL_ZONEID) &&
825 		    (prom_stdout_is_framebuffer() != 0) &&
826 		    (userbufsize > strlen(prom_stdoutpath()))) {
827 			prom_strip_options(prom_stdoutpath(),
828 			    opp->oprom_array);	/* strip options and copy */
829 			valsize = opp->oprom_size = strlen(opp->oprom_array);
830 			if (copyout(opp, (void *)arg,
831 			    valsize + 1 + sizeof (uint_t)) != 0)
832 				error = EFAULT;
833 		} else
834 			error = EINVAL;
835 		break;
836 
837 	/*
838 	 * Convert a logical or physical device path to prom device path
839 	 */
840 	case OPROMDEV2PROMNAME: {
841 		char *prom_name;
842 
843 		/*
844 		 * The input argument, a pathname, is a NULL terminated string.
845 		 */
846 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
847 		    (size_t)userbufsize, MAXPATHLEN)) != 0) {
848 			break;
849 		}
850 
851 		prom_name = kmem_alloc(userbufsize, KM_SLEEP);
852 
853 		/*
854 		 * convert the devfs path to an equivalent prom path
855 		 */
856 		error = i_devname_to_promname(opp->oprom_array, prom_name,
857 		    userbufsize);
858 
859 		if (error != 0) {
860 			kmem_free(prom_name, userbufsize);
861 			break;
862 		}
863 
864 		for (valsize = 0; valsize < userbufsize; valsize++) {
865 			opp->oprom_array[valsize] = prom_name[valsize];
866 
867 			if ((valsize > 0) && (prom_name[valsize] == '\0') &&
868 			    (prom_name[valsize-1] == '\0')) {
869 				break;
870 			}
871 		}
872 		opp->oprom_size = valsize;
873 
874 		kmem_free(prom_name, userbufsize);
875 		if (copyout(opp, (void *)arg, sizeof (uint_t) + valsize) != 0)
876 			error = EFAULT;
877 
878 		break;
879 	}
880 
881 	case OPROMSETOPT:
882 	case OPROMSETOPT2: {
883 		int namebuflen;
884 		int valbuflen;
885 
886 		if ((prom_is_openprom() == 0) ||
887 		    (node_id == OBP_NONODE) || (node_id == OBP_BADNODE)) {
888 			error = EINVAL;
889 			break;
890 		}
891 
892 		/*
893 		 * The arguments are a property name and a value.
894 		 * Copy in the entire user buffer.
895 		 */
896 		if (copyin(((caddr_t)arg + sizeof (uint_t)),
897 		    opp->oprom_array, userbufsize) != 0) {
898 			error = EFAULT;
899 			break;
900 		}
901 
902 		/*
903 		 * The property name is the first string, value second
904 		 */
905 		namebuflen = strlen(opp->oprom_array);
906 		valbuf = opp->oprom_array + namebuflen + 1;
907 		valbuflen = strlen(valbuf);
908 
909 		if (cmd == OPROMSETOPT) {
910 			valsize = valbuflen + 1;  /* +1 for the '\0' */
911 		} else {
912 			if ((namebuflen + 1 + valbuflen + 1) > userbufsize) {
913 				error = EINVAL;
914 				break;
915 			}
916 			valsize = (opp->oprom_array + userbufsize) - valbuf;
917 		}
918 
919 		/*
920 		 * 4010173: 'name' is not an option, but it is a property.
921 		 */
922 		if (strcmp(opp->oprom_array, "name") == 0)
923 			error = EINVAL;
924 		else if (prom_setprop(node_id, opp->oprom_array,
925 		    valbuf, valsize) < 0)
926 			error = EINVAL;
927 
928 		break;
929 	}
930 
931 	case OPROMREADY64: {
932 		struct openprom_opr64 *opr =
933 		    (struct openprom_opr64 *)opp->oprom_array;
934 		int i;
935 		pnode_t id;
936 
937 		if (userbufsize < sizeof (*opr)) {
938 			error = EINVAL;
939 			break;
940 		}
941 
942 		valsize = userbufsize -
943 		    offsetof(struct openprom_opr64, message);
944 
945 		i = prom_version_check(opr->message, valsize, &id);
946 		opr->return_code = i;
947 		opr->nodeid = (int)id;
948 
949 		valsize = offsetof(struct openprom_opr64, message);
950 		valsize += strlen(opr->message) + 1;
951 
952 		/*
953 		 * copyout only the part of the user buffer we need to.
954 		 */
955 		if (copyout(opp, (void *)arg,
956 		    (size_t)(min((uint_t)valsize, userbufsize) +
957 		    sizeof (uint_t))) != 0)
958 			error = EFAULT;
959 		break;
960 
961 	}	/* case OPROMREADY64 */
962 
963 	case WANBOOT_SETKEY: {
964 		struct wankeyio *wp;
965 		int reslen;
966 		int status;
967 		int rv;
968 		int i;
969 
970 		/*
971 		 * The argument is a struct wankeyio.  Validate it as best
972 		 * we can.
973 		 */
974 		if (userbufsize != (sizeof (struct wankeyio))) {
975 			error = EINVAL;
976 			break;
977 		}
978 		if (copyin(((caddr_t)arg + sizeof (uint_t)),
979 		    opp->oprom_array, sizeof (struct wankeyio)) != 0) {
980 			error = EFAULT;
981 			break;
982 		}
983 		wp = (struct wankeyio *)opp->oprom_array;
984 
985 		/* check for key name and key size overflow */
986 		for (i = 0; i < WANBOOT_MAXKEYNAMELEN; i++)
987 			if (wp->wk_keyname[i] == '\0')
988 				break;
989 		if ((i == WANBOOT_MAXKEYNAMELEN) ||
990 		    (wp->wk_keysize > WANBOOT_MAXKEYLEN)) {
991 			error = EINVAL;
992 			break;
993 		}
994 
995 		rv = prom_set_security_key(wp->wk_keyname, wp->wk_u.key,
996 		    wp->wk_keysize, &reslen, &status);
997 		if (rv)
998 			error = EIO;
999 		else
1000 			switch (status) {
1001 				case 0:
1002 					error = 0;
1003 					break;
1004 
1005 				case -2:	/* out of key storage space */
1006 					error = ENOSPC;
1007 					break;
1008 
1009 				case -3:	/* key name or value too long */
1010 					error = EINVAL;
1011 					break;
1012 
1013 				case -4:	/* can't delete:  no such key */
1014 					error = ENOENT;
1015 					break;
1016 
1017 				case -1:	/* unspecified error */
1018 				default:	/* this should not happen */
1019 					error = EIO;
1020 					break;
1021 			}
1022 		break;
1023 	}	/* case WANBOOT_SETKEY */
1024 #endif	/* !__i386 && !__amd64 */
1025 	}	/* switch (cmd)	*/
1026 
1027 	kmem_free(opp, userbufsize + sizeof (uint_t) + 1);
1028 	return (error);
1029 }
1030 
1031 /*ARGSUSED*/
1032 static int
1033 opromioctl(dev_t dev, int cmd, intptr_t arg, int mode,
1034 	cred_t *credp, int *rvalp)
1035 {
1036 	struct oprom_state *st;
1037 	struct opromioctl_args arg_block;
1038 
1039 	if (getminor(dev) >= MAX_OPENS)
1040 		return (ENXIO);
1041 
1042 	st = &oprom_state[getminor(dev)];
1043 	ASSERT(st->already_open);
1044 	arg_block.st = st;
1045 	arg_block.cmd = cmd;
1046 	arg_block.arg = arg;
1047 	arg_block.mode = mode;
1048 	return (prom_tree_access(opromioctl_cb, &arg_block, &st->tree_gen));
1049 }
1050 
1051 /*
1052  * Copyin string and verify the actual string length is less than maxsize
1053  * specified by the caller.
1054  *
1055  * Currently, maxsize is either OBP_MAXPROPNAME for property names
1056  * or MAXPATHLEN for device path names. userbufsize is specified
1057  * by the userland caller.
1058  */
1059 static int
1060 oprom_copyinstr(intptr_t arg, char *buf, size_t bufsize, size_t maxsize)
1061 {
1062 	int error;
1063 	size_t actual_len;
1064 
1065 	if ((error = copyinstr(((caddr_t)arg + sizeof (uint_t)),
1066 	    buf, bufsize, &actual_len)) != 0) {
1067 		return (error);
1068 	}
1069 	if ((actual_len == 0) || (actual_len > maxsize)) {
1070 		return (EINVAL);
1071 	}
1072 
1073 	return (0);
1074 }
1075 
1076 /*
1077  * Check pnode_t passed in from userland
1078  */
1079 static int
1080 oprom_checknodeid(pnode_t node_id, pnode_t current_id)
1081 {
1082 	int depth;
1083 	pnode_t id[OBP_STACKDEPTH];
1084 
1085 	/*
1086 	 * optimized path
1087 	 */
1088 	if (node_id == 0) {
1089 		return (1);
1090 	}
1091 	if (node_id == OBP_BADNODE) {
1092 		return (0);
1093 	}
1094 	if ((current_id != OBP_BADNODE) && ((node_id == current_id) ||
1095 	    (node_id == prom_nextnode(current_id)) ||
1096 	    (node_id == prom_childnode(current_id)))) {
1097 		return (1);
1098 	}
1099 
1100 	/*
1101 	 * long path: walk from root till we find node_id
1102 	 */
1103 	depth = 1;
1104 	id[0] = prom_nextnode((pnode_t)0);
1105 
1106 	while (depth) {
1107 		if (id[depth - 1] == node_id)
1108 			return (1);	/* node_id found */
1109 
1110 		if (id[depth] = prom_childnode(id[depth - 1])) {
1111 			depth++;
1112 			continue;
1113 		}
1114 
1115 		while (depth &&
1116 		    ((id[depth - 1] = prom_nextnode(id[depth - 1])) == 0))
1117 			depth--;
1118 	}
1119 	return (0);	/* node_id not found */
1120 }
1121 
1122 static int
1123 oprom_copytree(struct oprom_state *st, uint_t flag)
1124 {
1125 	ASSERT(st->snapshot == NULL && st->size == 0);
1126 	return (oprom_copynode(
1127 	    prom_nextnode(0), flag, &st->snapshot, &st->size));
1128 }
1129 
1130 static int
1131 oprom_snapshot(struct oprom_state *st, intptr_t arg)
1132 {
1133 	uint_t flag;
1134 
1135 	if (oprom_setstate(st, IOC_SNAP) == -1)
1136 		return (EBUSY);
1137 
1138 	/* copyin flag and create snapshot */
1139 	if ((copyin((void *)arg, &flag, sizeof (uint_t)) != 0) ||
1140 	    (oprom_copytree(st, flag) != 0)) {
1141 		(void) oprom_setstate(st, IOC_IDLE);
1142 		return (EFAULT);
1143 	}
1144 
1145 
1146 	/* copyout the size of the snapshot */
1147 	flag = (uint_t)st->size;
1148 	if (copyout(&flag, (void *)arg, sizeof (uint_t)) != 0) {
1149 		kmem_free(st->snapshot, st->size);
1150 		st->snapshot = NULL;
1151 		st->size = 0;
1152 		(void) oprom_setstate(st, IOC_IDLE);
1153 		return (EFAULT);
1154 	}
1155 
1156 	(void) oprom_setstate(st, IOC_DONE);
1157 	return (0);
1158 }
1159 
1160 static int
1161 oprom_copyout(struct oprom_state *st, intptr_t arg)
1162 {
1163 	int error = 0;
1164 	uint_t size;
1165 
1166 	if (oprom_setstate(st, IOC_COPY) == -1)
1167 		return (EBUSY);
1168 
1169 	/* copyin size and copyout snapshot */
1170 	if (copyin((void *)arg, &size, sizeof (uint_t)) != 0)
1171 		error = EFAULT;
1172 	else if (size < st->size)
1173 		error = EINVAL;
1174 	else if (copyout(st->snapshot, (void *)arg, st->size) != 0)
1175 		error = EFAULT;
1176 
1177 	if (error) {
1178 		/*
1179 		 * on error keep the snapshot until a successful
1180 		 * copyout or when the driver is closed.
1181 		 */
1182 		(void) oprom_setstate(st, IOC_DONE);
1183 		return (error);
1184 	}
1185 
1186 	kmem_free(st->snapshot, st->size);
1187 	st->snapshot = NULL;
1188 	st->size = 0;
1189 	(void) oprom_setstate(st, IOC_IDLE);
1190 	return (0);
1191 }
1192 
1193 /*
1194  * Copy all properties of nodeid into a single packed nvlist
1195  */
1196 static int
1197 oprom_copyprop(pnode_t nodeid, uint_t flag, nvlist_t *nvl)
1198 {
1199 	int proplen;
1200 	char *propname, *propval, *buf1, *buf2;
1201 
1202 	ASSERT(nvl != NULL);
1203 
1204 	/*
1205 	 * non verbose mode, get the "name" property only
1206 	 */
1207 	if (flag == 0) {
1208 		proplen = prom_getproplen(nodeid, "name");
1209 		if (proplen <= 0) {
1210 			cmn_err(CE_WARN,
1211 			    "failed to get the name of openprom node 0x%x",
1212 			    nodeid);
1213 			(void) nvlist_add_string(nvl, "name", "");
1214 			return (0);
1215 		}
1216 		propval = kmem_zalloc(proplen + 1, KM_SLEEP);
1217 		(void) prom_getprop(nodeid, "name", propval);
1218 		(void) nvlist_add_string(nvl, "name", propval);
1219 		kmem_free(propval, proplen + 1);
1220 		return (0);
1221 	}
1222 
1223 	/*
1224 	 * Ask for first property by passing a NULL string
1225 	 */
1226 	buf1 = kmem_alloc(OBP_MAXPROPNAME, KM_SLEEP);
1227 	buf2 = kmem_zalloc(OBP_MAXPROPNAME, KM_SLEEP);
1228 	buf1[0] = '\0';
1229 	while (propname = (char *)prom_nextprop(nodeid, buf1, buf2)) {
1230 		if (strlen(propname) == 0)
1231 			break;		/* end of prop list */
1232 		(void) strcpy(buf1, propname);
1233 
1234 		proplen = prom_getproplen(nodeid, propname);
1235 		if (proplen == 0) {
1236 			/* boolean property */
1237 			(void) nvlist_add_boolean(nvl, propname);
1238 			continue;
1239 		}
1240 		/* add 1 for null termination in case of a string */
1241 		propval = kmem_zalloc(proplen + 1, KM_SLEEP);
1242 		(void) prom_getprop(nodeid, propname, propval);
1243 		(void) nvlist_add_byte_array(nvl, propname,
1244 		    (uchar_t *)propval, proplen + 1);
1245 		kmem_free(propval, proplen + 1);
1246 		bzero(buf2, OBP_MAXPROPNAME);
1247 	}
1248 
1249 	kmem_free(buf1, OBP_MAXPROPNAME);
1250 	kmem_free(buf2, OBP_MAXPROPNAME);
1251 
1252 	return (0);
1253 }
1254 
1255 /*
1256  * Copy all children and descendents into a a packed nvlist
1257  */
1258 static int
1259 oprom_copychild(pnode_t nodeid, uint_t flag, char **buf, size_t *size)
1260 {
1261 	nvlist_t *nvl;
1262 	pnode_t child = prom_childnode(nodeid);
1263 
1264 	if (child == 0)
1265 		return (0);
1266 
1267 	(void) nvlist_alloc(&nvl, 0, KM_SLEEP);
1268 	while (child != 0) {
1269 		char *nodebuf = NULL;
1270 		size_t nodesize = 0;
1271 		if (oprom_copynode(child, flag, &nodebuf, &nodesize)) {
1272 			nvlist_free(nvl);
1273 			cmn_err(CE_WARN, "failed to copy nodeid 0x%x", child);
1274 			return (-1);
1275 		}
1276 		(void) nvlist_add_byte_array(nvl, "node",
1277 		    (uchar_t *)nodebuf, nodesize);
1278 		kmem_free(nodebuf, nodesize);
1279 		child = prom_nextnode(child);
1280 	}
1281 
1282 	(void) nvlist_pack(nvl, buf, size, NV_ENCODE_NATIVE, KM_SLEEP);
1283 	nvlist_free(nvl);
1284 	return (0);
1285 }
1286 
1287 /*
1288  * Copy a node into a packed nvlist
1289  */
1290 static int
1291 oprom_copynode(pnode_t nodeid, uint_t flag, char **buf, size_t *size)
1292 {
1293 	int error = 0;
1294 	nvlist_t *nvl;
1295 	char *childlist = NULL;
1296 	size_t childsize = 0;
1297 
1298 	(void) nvlist_alloc(&nvl, NV_UNIQUE_NAME, KM_SLEEP);
1299 	ASSERT(nvl != NULL);
1300 
1301 	/* @nodeid -- @ is not a legal char in a 1275 property name */
1302 	(void) nvlist_add_int32(nvl, "@nodeid", (int32_t)nodeid);
1303 
1304 	/* properties */
1305 	if (error = oprom_copyprop(nodeid, flag, nvl))
1306 		goto fail;
1307 
1308 	/* children */
1309 	error = oprom_copychild(nodeid, flag, &childlist, &childsize);
1310 	if (error != 0)
1311 		goto fail;
1312 	if (childlist != NULL) {
1313 		(void) nvlist_add_byte_array(nvl, "@child",
1314 		    (uchar_t *)childlist, (uint_t)childsize);
1315 		kmem_free(childlist, childsize);
1316 	}
1317 
1318 	/* pack into contiguous buffer */
1319 	error = nvlist_pack(nvl, buf, size, NV_ENCODE_NATIVE, KM_SLEEP);
1320 
1321 fail:
1322 	nvlist_free(nvl);
1323 	return (error);
1324 }
1325 
1326 /*
1327  * The driver is stateful across OPROMSNAPSHOT and OPROMCOPYOUT.
1328  * This function encapsulates the state machine:
1329  *
1330  *	-> IOC_IDLE -> IOC_SNAP -> IOC_DONE -> IOC_COPY ->
1331  *	|		SNAPSHOT		COPYOUT	 |
1332  *	--------------------------------------------------
1333  *
1334  * Returns 0 on success and -1 on failure
1335  */
1336 static int
1337 oprom_setstate(struct oprom_state *st, int16_t new_state)
1338 {
1339 	int ret = 0;
1340 
1341 	mutex_enter(&oprom_lock);
1342 	switch (new_state) {
1343 	case IOC_IDLE:
1344 	case IOC_DONE:
1345 		break;
1346 	case IOC_SNAP:
1347 		if (st->ioc_state != IOC_IDLE)
1348 			ret = -1;
1349 		break;
1350 	case IOC_COPY:
1351 		if (st->ioc_state != IOC_DONE)
1352 			ret = -1;
1353 		break;
1354 	default:
1355 		ret = -1;
1356 	}
1357 
1358 	if (ret == 0)
1359 		st->ioc_state = new_state;
1360 	else
1361 		cmn_err(CE_NOTE, "incorrect state transition from %d to %d",
1362 		    st->ioc_state, new_state);
1363 	mutex_exit(&oprom_lock);
1364 	return (ret);
1365 }
1366