xref: /titanic_44/usr/src/uts/common/io/openprom.c (revision 2ec7cc7fc084163eaed884efee9bbd322cc8951b)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 /*
27  * Ported from 4.1.1_PSRA: "@(#)openprom.c 1.19 91/02/19 SMI";
28  *
29  * Porting notes:
30  *
31  * OPROMU2P unsupported after SunOS 4.x.
32  *
33  * Only one of these devices per system is allowed.
34  */
35 
36 /*
37  * Openprom eeprom options/devinfo driver.
38  */
39 
40 #include <sys/types.h>
41 #include <sys/errno.h>
42 #include <sys/file.h>
43 #include <sys/cmn_err.h>
44 #include <sys/kmem.h>
45 #include <sys/openpromio.h>
46 #include <sys/conf.h>
47 #include <sys/stat.h>
48 #include <sys/modctl.h>
49 #include <sys/debug.h>
50 #include <sys/autoconf.h>
51 #include <sys/ddi.h>
52 #include <sys/sunddi.h>
53 #include <sys/promif.h>
54 #include <sys/sysmacros.h>	/* offsetof */
55 #include <sys/nvpair.h>
56 #include <sys/wanboot_impl.h>
57 #include <sys/zone.h>
58 #include <sys/consplat.h>
59 
60 #define	MAX_OPENS	32	/* Up to this many simultaneous opens */
61 
62 #define	IOC_IDLE	0	/* snapshot ioctl states */
63 #define	IOC_SNAP	1	/* snapshot in progress */
64 #define	IOC_DONE	2	/* snapshot done, but not copied out */
65 #define	IOC_COPY	3	/* copyout in progress */
66 
67 /*
68  * XXX	Make this dynamic.. or (better still) make the interface stateless
69  */
70 static struct oprom_state {
71 	pnode_t	current_id;	/* node we're fetching props from */
72 	int16_t	already_open;	/* if true, this instance is 'active' */
73 	int16_t	ioc_state;	/* snapshot ioctl state */
74 	char	*snapshot;	/* snapshot of all prom nodes */
75 	size_t	size;		/* size of snapshot */
76 	prom_generation_cookie_t tree_gen;
77 } oprom_state[MAX_OPENS];
78 
79 static kmutex_t oprom_lock;	/* serialize instance assignment */
80 
81 static int opromopen(dev_t *, int, int, cred_t *);
82 static int opromioctl(dev_t, int, intptr_t, int, cred_t *, int *);
83 static int opromclose(dev_t, int, int, cred_t *);
84 
85 static int opinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
86 		void **result);
87 static int opattach(dev_info_t *, ddi_attach_cmd_t cmd);
88 static int opdetach(dev_info_t *, ddi_detach_cmd_t cmd);
89 
90 /* help functions */
91 static int oprom_checknodeid(pnode_t, pnode_t);
92 static int oprom_copyinstr(intptr_t, char *, size_t, size_t);
93 static int oprom_copynode(pnode_t, uint_t, char **, size_t *);
94 static int oprom_snapshot(struct oprom_state *, intptr_t);
95 static int oprom_copyout(struct oprom_state *, intptr_t);
96 static int oprom_setstate(struct oprom_state *, int16_t);
97 
98 static struct cb_ops openeepr_cb_ops = {
99 	opromopen,		/* open */
100 	opromclose,		/* close */
101 	nodev,			/* strategy */
102 	nodev,			/* print */
103 	nodev,			/* dump */
104 	nodev,			/* read */
105 	nodev,			/* write */
106 	opromioctl,		/* ioctl */
107 	nodev,			/* devmap */
108 	nodev,			/* mmap */
109 	nodev,			/* segmap */
110 	nochpoll,		/* poll */
111 	ddi_prop_op,		/* prop_op */
112 	NULL,			/* streamtab  */
113 	D_NEW | D_MP		/* Driver compatibility flag */
114 };
115 
116 static struct dev_ops openeepr_ops = {
117 	DEVO_REV,		/* devo_rev, */
118 	0,			/* refcnt  */
119 	opinfo,			/* info */
120 	nulldev,		/* identify */
121 	nulldev,		/* probe */
122 	opattach,		/* attach */
123 	opdetach,		/* detach */
124 	nodev,			/* reset */
125 	&openeepr_cb_ops,	/* driver operations */
126 	NULL,			/* bus operations */
127 	NULL,			/* power */
128 	ddi_quiesce_not_needed,		/* quiesce */
129 };
130 
131 /*
132  * Module linkage information for the kernel.
133  */
134 static struct modldrv modldrv = {
135 	&mod_driverops,
136 	"OPENPROM/NVRAM Driver",
137 	&openeepr_ops
138 };
139 
140 static struct modlinkage modlinkage = {
141 	MODREV_1,
142 	&modldrv,
143 	NULL
144 };
145 
146 int
147 _init(void)
148 {
149 	int	error;
150 
151 	mutex_init(&oprom_lock, NULL, MUTEX_DRIVER, NULL);
152 
153 	error = mod_install(&modlinkage);
154 	if (error != 0) {
155 		mutex_destroy(&oprom_lock);
156 		return (error);
157 	}
158 
159 	return (0);
160 }
161 
162 int
163 _info(struct modinfo *modinfop)
164 {
165 	return (mod_info(&modlinkage, modinfop));
166 }
167 
168 int
169 _fini(void)
170 {
171 	int	error;
172 
173 	error = mod_remove(&modlinkage);
174 	if (error != 0)
175 		return (error);
176 
177 	mutex_destroy(&oprom_lock);
178 	return (0);
179 }
180 
181 static dev_info_t *opdip;
182 static pnode_t options_nodeid;
183 
184 /*ARGSUSED*/
185 static int
186 opinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
187 {
188 	int error = DDI_FAILURE;
189 
190 	switch (infocmd) {
191 	case DDI_INFO_DEVT2DEVINFO:
192 		*result = (void *)opdip;
193 		error = DDI_SUCCESS;
194 		break;
195 	case DDI_INFO_DEVT2INSTANCE:
196 		/* All dev_t's map to the same, single instance */
197 		*result = (void *)0;
198 		error = DDI_SUCCESS;
199 		break;
200 	default:
201 		break;
202 	}
203 
204 	return (error);
205 }
206 
207 static int
208 opattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
209 {
210 	switch (cmd) {
211 
212 	case DDI_ATTACH:
213 		if (prom_is_openprom()) {
214 			options_nodeid = prom_optionsnode();
215 		} else {
216 			options_nodeid = OBP_BADNODE;
217 		}
218 
219 		opdip = dip;
220 
221 		if (ddi_create_minor_node(dip, "openprom", S_IFCHR,
222 		    0, DDI_PSEUDO, NULL) == DDI_FAILURE) {
223 			return (DDI_FAILURE);
224 		}
225 
226 		return (DDI_SUCCESS);
227 
228 	default:
229 		return (DDI_FAILURE);
230 	}
231 }
232 
233 static int
234 opdetach(dev_info_t *dip, ddi_detach_cmd_t cmd)
235 {
236 	if (cmd != DDI_DETACH)
237 		return (DDI_FAILURE);
238 
239 	ddi_remove_minor_node(dip, NULL);
240 	opdip = NULL;
241 
242 	return (DDI_SUCCESS);
243 }
244 
245 /*
246  * Allow multiple opens by tweaking the dev_t such that it looks like each
247  * open is getting a different minor device.  Each minor gets a separate
248  * entry in the oprom_state[] table.
249  */
250 /*ARGSUSED*/
251 static int
252 opromopen(dev_t *devp, int flag, int otyp, cred_t *credp)
253 {
254 	int m;
255 	struct oprom_state *st = oprom_state;
256 
257 	if (getminor(*devp) != 0)
258 		return (ENXIO);
259 
260 	mutex_enter(&oprom_lock);
261 	for (m = 0; m < MAX_OPENS; m++)
262 		if (st->already_open)
263 			st++;
264 		else {
265 			st->already_open = 1;
266 			/*
267 			 * It's ours.
268 			 */
269 			st->current_id = (pnode_t)0;
270 			ASSERT(st->snapshot == NULL && st->size == 0);
271 			ASSERT(st->ioc_state == IOC_IDLE);
272 			break;
273 		}
274 	mutex_exit(&oprom_lock);
275 
276 	if (m == MAX_OPENS)  {
277 		/*
278 		 * "Thank you for calling, but all our lines are
279 		 * busy at the moment.."
280 		 *
281 		 * We could get sophisticated here, and go into a
282 		 * sleep-retry loop .. but hey, I just can't see
283 		 * that many processes sitting in this driver.
284 		 *
285 		 * (And if it does become possible, then we should
286 		 * change the interface so that the 'state' is held
287 		 * external to the driver)
288 		 */
289 		return (EAGAIN);
290 	}
291 
292 	*devp = makedevice(getmajor(*devp), (minor_t)m);
293 
294 	return (0);
295 }
296 
297 /*ARGSUSED*/
298 static int
299 opromclose(dev_t dev, int flag, int otype, cred_t *cred_p)
300 {
301 	struct oprom_state *st;
302 
303 	st = &oprom_state[getminor(dev)];
304 	ASSERT(getminor(dev) < MAX_OPENS && st->already_open != 0);
305 	if (st->snapshot) {
306 		kmem_free(st->snapshot, st->size);
307 		st->snapshot = NULL;
308 		st->size = 0;
309 		st->ioc_state = IOC_IDLE;
310 	}
311 	mutex_enter(&oprom_lock);
312 	st->already_open = 0;
313 	mutex_exit(&oprom_lock);
314 
315 	return (0);
316 }
317 
318 struct opromioctl_args {
319 	struct oprom_state *st;
320 	int cmd;
321 	intptr_t arg;
322 	int mode;
323 };
324 
325 /*ARGSUSED*/
326 static int
327 opromioctl_cb(void *avp, int has_changed)
328 {
329 	struct opromioctl_args *argp = avp;
330 	int cmd;
331 	intptr_t arg;
332 	int mode;
333 	struct oprom_state *st;
334 	struct openpromio *opp;
335 	int valsize;
336 	char *valbuf;
337 	int error = 0;
338 	uint_t userbufsize;
339 	pnode_t node_id;
340 	char propname[OBP_MAXPROPNAME];
341 
342 	st = argp->st;
343 	cmd = argp->cmd;
344 	arg = argp->arg;
345 	mode = argp->mode;
346 
347 	if (has_changed) {
348 		/*
349 		 * The prom tree has changed since we last used current_id,
350 		 * so we need to check it.
351 		 */
352 		if ((st->current_id != OBP_NONODE) &&
353 		    (st->current_id != OBP_BADNODE)) {
354 			if (oprom_checknodeid(st->current_id, OBP_NONODE) == 0)
355 				st->current_id = OBP_BADNODE;
356 		}
357 	}
358 
359 	/*
360 	 * Check permissions
361 	 * and weed out unsupported commands on x86 platform
362 	 */
363 	switch (cmd) {
364 #if !defined(__i386) && !defined(__amd64)
365 	case OPROMLISTKEYSLEN:
366 		valsize = prom_asr_list_keys_len();
367 		opp = (struct openpromio *)kmem_zalloc(
368 		    sizeof (uint_t) + 1, KM_SLEEP);
369 		opp->oprom_size = valsize;
370 		if (copyout(opp, (void *)arg, (sizeof (uint_t))) != 0)
371 			error = EFAULT;
372 		kmem_free(opp, sizeof (uint_t) + 1);
373 		break;
374 	case OPROMLISTKEYS:
375 		valsize = prom_asr_list_keys_len();
376 		if (copyin((void *)arg, &userbufsize, sizeof (uint_t)) != 0)
377 			return (EFAULT);
378 		if (valsize > userbufsize)
379 			return (EINVAL);
380 		valbuf = (char *)kmem_zalloc(valsize + 1, KM_SLEEP);
381 		if (prom_asr_list_keys((caddr_t)valbuf) == -1) {
382 			kmem_free(valbuf, valsize + 1);
383 			return (EFAULT);
384 		}
385 		opp = (struct openpromio *)kmem_zalloc(
386 		    valsize + sizeof (uint_t) + 1, KM_SLEEP);
387 		opp->oprom_size = valsize;
388 		bcopy(valbuf, opp->oprom_array, valsize);
389 		if (copyout(opp, (void *)arg, (valsize + sizeof (uint_t))) != 0)
390 			error = EFAULT;
391 		kmem_free(valbuf, valsize + 1);
392 		kmem_free(opp, valsize + sizeof (uint_t) + 1);
393 		break;
394 	case OPROMEXPORT:
395 		valsize = prom_asr_export_len();
396 		if (copyin((void *)arg, &userbufsize, sizeof (uint_t)) != 0)
397 			return (EFAULT);
398 		if (valsize > userbufsize)
399 			return (EINVAL);
400 		valbuf = (char *)kmem_zalloc(valsize + 1, KM_SLEEP);
401 		if (prom_asr_export((caddr_t)valbuf) == -1) {
402 			kmem_free(valbuf, valsize + 1);
403 			return (EFAULT);
404 		}
405 		opp = (struct openpromio *)kmem_zalloc(
406 		    valsize + sizeof (uint_t) + 1, KM_SLEEP);
407 		opp->oprom_size = valsize;
408 		bcopy(valbuf, opp->oprom_array, valsize);
409 		if (copyout(opp, (void *)arg, (valsize + sizeof (uint_t))) != 0)
410 			error = EFAULT;
411 		kmem_free(valbuf, valsize + 1);
412 		kmem_free(opp, valsize + sizeof (uint_t) + 1);
413 		break;
414 	case OPROMEXPORTLEN:
415 		valsize = prom_asr_export_len();
416 		opp = (struct openpromio *)kmem_zalloc(
417 		    sizeof (uint_t) + 1, KM_SLEEP);
418 		opp->oprom_size = valsize;
419 		if (copyout(opp, (void *)arg, (sizeof (uint_t))) != 0)
420 			error = EFAULT;
421 		kmem_free(opp, sizeof (uint_t) + 1);
422 		break;
423 #endif
424 	case OPROMGETOPT:
425 	case OPROMNXTOPT:
426 		if ((mode & FREAD) == 0) {
427 			return (EPERM);
428 		}
429 		node_id = options_nodeid;
430 		break;
431 
432 	case OPROMSETOPT:
433 	case OPROMSETOPT2:
434 #if !defined(__i386) && !defined(__amd64)
435 		if (mode & FWRITE) {
436 			node_id = options_nodeid;
437 			break;
438 		}
439 #endif /* !__i386 && !__amd64 */
440 		return (EPERM);
441 
442 	case OPROMNEXT:
443 	case OPROMCHILD:
444 	case OPROMGETPROP:
445 	case OPROMGETPROPLEN:
446 	case OPROMNXTPROP:
447 	case OPROMSETNODEID:
448 		if ((mode & FREAD) == 0) {
449 			return (EPERM);
450 		}
451 		node_id = st->current_id;
452 		break;
453 	case OPROMCOPYOUT:
454 		if (st->snapshot == NULL)
455 			return (EINVAL);
456 		/*FALLTHROUGH*/
457 	case OPROMSNAPSHOT:
458 	case OPROMGETCONS:
459 	case OPROMGETBOOTARGS:
460 	case OPROMGETVERSION:
461 	case OPROMPATH2DRV:
462 	case OPROMPROM2DEVNAME:
463 #if !defined(__i386) && !defined(__amd64)
464 	case OPROMGETFBNAME:
465 	case OPROMDEV2PROMNAME:
466 	case OPROMREADY64:
467 #endif	/* !__i386 && !__amd64 */
468 		if ((mode & FREAD) == 0) {
469 			return (EPERM);
470 		}
471 		break;
472 
473 #if !defined(__i386) && !defined(__amd64)
474 	case WANBOOT_SETKEY:
475 		if (!(mode & FWRITE))
476 			return (EPERM);
477 		break;
478 #endif	/* !__i386 && !defined(__amd64) */
479 
480 	default:
481 		return (EINVAL);
482 	}
483 
484 	/*
485 	 * Deal with SNAPSHOT and COPYOUT ioctls first
486 	 */
487 	switch (cmd) {
488 	case OPROMCOPYOUT:
489 		return (oprom_copyout(st, arg));
490 
491 	case OPROMSNAPSHOT:
492 		return (oprom_snapshot(st, arg));
493 	}
494 
495 	/*
496 	 * Copy in user argument length and allocation memory
497 	 *
498 	 * NB do not copyin the entire buffer we may not need
499 	 *	to. userbufsize can be as big as 32 K.
500 	 */
501 	if (copyin((void *)arg, &userbufsize, sizeof (uint_t)) != 0)
502 		return (EFAULT);
503 
504 	if (userbufsize == 0 || userbufsize > OPROMMAXPARAM)
505 		return (EINVAL);
506 
507 	opp = (struct openpromio *)kmem_zalloc(
508 	    userbufsize + sizeof (uint_t) + 1, KM_SLEEP);
509 
510 	/*
511 	 * Execute command
512 	 */
513 	switch (cmd) {
514 
515 	case OPROMGETOPT:
516 	case OPROMGETPROP:
517 	case OPROMGETPROPLEN:
518 
519 		if ((prom_is_openprom() == 0) ||
520 		    (node_id == OBP_NONODE) || (node_id == OBP_BADNODE)) {
521 			error = EINVAL;
522 			break;
523 		}
524 
525 		/*
526 		 * The argument, a NULL terminated string, is a prop name.
527 		 */
528 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
529 		    (size_t)userbufsize, OBP_MAXPROPNAME)) != 0) {
530 			break;
531 		}
532 		(void) strcpy(propname, opp->oprom_array);
533 		valsize = prom_getproplen(node_id, propname);
534 
535 		/*
536 		 * 4010173: 'name' is a property, but not an option.
537 		 */
538 		if ((cmd == OPROMGETOPT) && (strcmp("name", propname) == 0))
539 			valsize = -1;
540 
541 		if (cmd == OPROMGETPROPLEN)  {
542 			int proplen = valsize;
543 
544 			if (userbufsize < sizeof (int)) {
545 				error = EINVAL;
546 				break;
547 			}
548 			opp->oprom_size = valsize = sizeof (int);
549 			bcopy(&proplen, opp->oprom_array, valsize);
550 		} else if (valsize > 0 && valsize <= userbufsize) {
551 			bzero(opp->oprom_array, valsize + 1);
552 			(void) prom_getprop(node_id, propname,
553 			    opp->oprom_array);
554 			opp->oprom_size = valsize;
555 			if (valsize < userbufsize)
556 				++valsize;	/* Forces NULL termination */
557 						/* If space permits */
558 		} else {
559 			/*
560 			 * XXX: There is no error code if the buf is too small.
561 			 * which is consistent with the current behavior.
562 			 *
563 			 * NB: This clause also handles the non-error
564 			 * zero length (boolean) property value case.
565 			 */
566 			opp->oprom_size = 0;
567 			(void) strcpy(opp->oprom_array, "");
568 			valsize = 1;
569 		}
570 		if (copyout(opp, (void *)arg, (valsize + sizeof (uint_t))) != 0)
571 			error = EFAULT;
572 		break;
573 
574 	case OPROMNXTOPT:
575 	case OPROMNXTPROP:
576 		if ((prom_is_openprom() == 0) ||
577 		    (node_id == OBP_NONODE) || (node_id == OBP_BADNODE)) {
578 			error = EINVAL;
579 			break;
580 		}
581 
582 		/*
583 		 * The argument, a NULL terminated string, is a prop name.
584 		 */
585 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
586 		    (size_t)userbufsize, OBP_MAXPROPNAME)) != 0) {
587 			break;
588 		}
589 		valbuf = (char *)prom_nextprop(node_id, opp->oprom_array,
590 		    propname);
591 		valsize = strlen(valbuf);
592 
593 		/*
594 		 * 4010173: 'name' is a property, but it's not an option.
595 		 */
596 		if ((cmd == OPROMNXTOPT) && valsize &&
597 		    (strcmp(valbuf, "name") == 0)) {
598 			valbuf = (char *)prom_nextprop(node_id, "name",
599 			    propname);
600 			valsize = strlen(valbuf);
601 		}
602 
603 		if (valsize == 0) {
604 			opp->oprom_size = 0;
605 		} else if (++valsize <= userbufsize) {
606 			opp->oprom_size = valsize;
607 			bzero((caddr_t)opp->oprom_array, (size_t)valsize);
608 			bcopy((caddr_t)valbuf, (caddr_t)opp->oprom_array,
609 			    (size_t)valsize);
610 		}
611 
612 		if (copyout(opp, (void *)arg, valsize + sizeof (uint_t)) != 0)
613 			error = EFAULT;
614 		break;
615 
616 	case OPROMNEXT:
617 	case OPROMCHILD:
618 	case OPROMSETNODEID:
619 
620 		if (prom_is_openprom() == 0 ||
621 		    userbufsize < sizeof (pnode_t)) {
622 			error = EINVAL;
623 			break;
624 		}
625 
626 		/*
627 		 * The argument is a phandle. (aka pnode_t)
628 		 */
629 		if (copyin(((caddr_t)arg + sizeof (uint_t)),
630 		    opp->oprom_array, sizeof (pnode_t)) != 0) {
631 			error = EFAULT;
632 			break;
633 		}
634 
635 		/*
636 		 * If pnode_t from userland is garbage, we
637 		 * could confuse the PROM.
638 		 */
639 		node_id = *(pnode_t *)opp->oprom_array;
640 		if (oprom_checknodeid(node_id, st->current_id) == 0) {
641 			cmn_err(CE_NOTE, "!nodeid 0x%x not found",
642 			    (int)node_id);
643 			error = EINVAL;
644 			break;
645 		}
646 
647 		if (cmd == OPROMNEXT)
648 			st->current_id = prom_nextnode(node_id);
649 		else if (cmd == OPROMCHILD)
650 			st->current_id = prom_childnode(node_id);
651 		else {
652 			/* OPROMSETNODEID */
653 			st->current_id = node_id;
654 			break;
655 		}
656 
657 		opp->oprom_size = sizeof (pnode_t);
658 		*(pnode_t *)opp->oprom_array = st->current_id;
659 
660 		if (copyout(opp, (void *)arg,
661 		    sizeof (pnode_t) + sizeof (uint_t)) != 0)
662 			error = EFAULT;
663 		break;
664 
665 	case OPROMGETCONS:
666 		/*
667 		 * Is openboot supported on this machine?
668 		 * This ioctl used to return the console device,
669 		 * information; this is now done via modctl()
670 		 * in libdevinfo.
671 		 */
672 		opp->oprom_size = sizeof (char);
673 
674 		opp->oprom_array[0] |= prom_is_openprom() ?
675 		    OPROMCONS_OPENPROM : 0;
676 
677 		/*
678 		 * The rest of the info is needed by Install to
679 		 * decide if graphics should be started.
680 		 */
681 		if ((getzoneid() == GLOBAL_ZONEID) &&
682 		    plat_stdin_is_keyboard()) {
683 			opp->oprom_array[0] |= OPROMCONS_STDIN_IS_KBD;
684 		}
685 
686 		if ((getzoneid() == GLOBAL_ZONEID) &&
687 		    plat_stdout_is_framebuffer()) {
688 			opp->oprom_array[0] |= OPROMCONS_STDOUT_IS_FB;
689 		}
690 
691 		if (copyout(opp, (void *)arg,
692 		    sizeof (char) + sizeof (uint_t)) != 0)
693 			error = EFAULT;
694 		break;
695 
696 	case OPROMGETBOOTARGS: {
697 		extern char kern_bootargs[];
698 
699 		valsize = strlen(kern_bootargs) + 1;
700 		if (valsize > userbufsize) {
701 			error = EINVAL;
702 			break;
703 		}
704 		(void) strcpy(opp->oprom_array, kern_bootargs);
705 		opp->oprom_size = valsize - 1;
706 
707 		if (copyout(opp, (void *)arg, valsize + sizeof (uint_t)) != 0)
708 			error = EFAULT;
709 		break;
710 	}
711 
712 	/*
713 	 * convert a prom device path to an equivalent devfs path
714 	 */
715 	case OPROMPROM2DEVNAME: {
716 		char *dev_name;
717 
718 		/*
719 		 * The input argument, a pathname, is a NULL terminated string.
720 		 */
721 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
722 		    (size_t)userbufsize, MAXPATHLEN)) != 0) {
723 			break;
724 		}
725 
726 		dev_name = kmem_alloc(MAXPATHLEN, KM_SLEEP);
727 
728 		error = i_promname_to_devname(opp->oprom_array, dev_name);
729 		if (error != 0) {
730 			kmem_free(dev_name, MAXPATHLEN);
731 			break;
732 		}
733 		valsize = opp->oprom_size = strlen(dev_name);
734 		if (++valsize > userbufsize) {
735 			kmem_free(dev_name, MAXPATHLEN);
736 			error = EINVAL;
737 			break;
738 		}
739 		(void) strcpy(opp->oprom_array, dev_name);
740 		if (copyout(opp, (void *)arg, sizeof (uint_t) + valsize) != 0)
741 			error = EFAULT;
742 
743 		kmem_free(dev_name, MAXPATHLEN);
744 		break;
745 	}
746 
747 	/*
748 	 * Convert a prom device path name to a driver name
749 	 */
750 	case OPROMPATH2DRV: {
751 		char *drv_name;
752 		major_t maj;
753 
754 		/*
755 		 * The input argument, a pathname, is a NULL terminated string.
756 		 */
757 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
758 		    (size_t)userbufsize, MAXPATHLEN)) != 0) {
759 			break;
760 		}
761 
762 		/*
763 		 * convert path to a driver binding name
764 		 */
765 		maj = path_to_major((char *)opp->oprom_array);
766 		if (maj == DDI_MAJOR_T_NONE) {
767 			error = EINVAL;
768 			break;
769 		}
770 
771 		/*
772 		 * resolve any aliases
773 		 */
774 		if ((drv_name = ddi_major_to_name(maj)) == NULL) {
775 			error = EINVAL;
776 			break;
777 		}
778 
779 		(void) strcpy(opp->oprom_array, drv_name);
780 		opp->oprom_size = strlen(drv_name);
781 		if (copyout(opp, (void *)arg,
782 		    sizeof (uint_t) + opp->oprom_size + 1) != 0)
783 			error = EFAULT;
784 		break;
785 	}
786 
787 	case OPROMGETVERSION:
788 		/*
789 		 * Get a string representing the running version of the
790 		 * prom. How to create such a string is platform dependent,
791 		 * so we just defer to a promif function. If no such
792 		 * association exists, the promif implementation
793 		 * may copy the string "unknown" into the given buffer,
794 		 * and return its length (incl. NULL terminator).
795 		 *
796 		 * We expect prom_version_name to return the actual
797 		 * length of the string, but copy at most userbufsize
798 		 * bytes into the given buffer, including NULL termination.
799 		 */
800 
801 		valsize = prom_version_name(opp->oprom_array, userbufsize);
802 		if (valsize < 0) {
803 			error = EINVAL;
804 			break;
805 		}
806 
807 		/*
808 		 * copyout only the part of the user buffer we need to.
809 		 */
810 		if (copyout(opp, (void *)arg,
811 		    (size_t)(min((uint_t)valsize, userbufsize) +
812 		    sizeof (uint_t))) != 0)
813 			error = EFAULT;
814 		break;
815 
816 #if !defined(__i386) && !defined(__amd64)
817 	case OPROMGETFBNAME:
818 		/*
819 		 * Return stdoutpath, if it's a frame buffer.
820 		 * Yes, we are comparing a possibly longer string against
821 		 * the size we're really going to copy, but so what?
822 		 */
823 		if ((getzoneid() == GLOBAL_ZONEID) &&
824 		    (prom_stdout_is_framebuffer() != 0) &&
825 		    (userbufsize > strlen(prom_stdoutpath()))) {
826 			prom_strip_options(prom_stdoutpath(),
827 			    opp->oprom_array);	/* strip options and copy */
828 			valsize = opp->oprom_size = strlen(opp->oprom_array);
829 			if (copyout(opp, (void *)arg,
830 			    valsize + 1 + sizeof (uint_t)) != 0)
831 				error = EFAULT;
832 		} else
833 			error = EINVAL;
834 		break;
835 
836 	/*
837 	 * Convert a logical or physical device path to prom device path
838 	 */
839 	case OPROMDEV2PROMNAME: {
840 		char *prom_name;
841 
842 		/*
843 		 * The input argument, a pathname, is a NULL terminated string.
844 		 */
845 		if ((error = oprom_copyinstr(arg, opp->oprom_array,
846 		    (size_t)userbufsize, MAXPATHLEN)) != 0) {
847 			break;
848 		}
849 
850 		prom_name = kmem_alloc(userbufsize, KM_SLEEP);
851 
852 		/*
853 		 * convert the devfs path to an equivalent prom path
854 		 */
855 		error = i_devname_to_promname(opp->oprom_array, prom_name,
856 		    userbufsize);
857 
858 		if (error != 0) {
859 			kmem_free(prom_name, userbufsize);
860 			break;
861 		}
862 
863 		for (valsize = 0; valsize < userbufsize; valsize++) {
864 			opp->oprom_array[valsize] = prom_name[valsize];
865 
866 			if ((valsize > 0) && (prom_name[valsize] == '\0') &&
867 			    (prom_name[valsize-1] == '\0')) {
868 				break;
869 			}
870 		}
871 		opp->oprom_size = valsize;
872 
873 		kmem_free(prom_name, userbufsize);
874 		if (copyout(opp, (void *)arg, sizeof (uint_t) + valsize) != 0)
875 			error = EFAULT;
876 
877 		break;
878 	}
879 
880 	case OPROMSETOPT:
881 	case OPROMSETOPT2: {
882 		int namebuflen;
883 		int valbuflen;
884 
885 		if ((prom_is_openprom() == 0) ||
886 		    (node_id == OBP_NONODE) || (node_id == OBP_BADNODE)) {
887 			error = EINVAL;
888 			break;
889 		}
890 
891 		/*
892 		 * The arguments are a property name and a value.
893 		 * Copy in the entire user buffer.
894 		 */
895 		if (copyin(((caddr_t)arg + sizeof (uint_t)),
896 		    opp->oprom_array, userbufsize) != 0) {
897 			error = EFAULT;
898 			break;
899 		}
900 
901 		/*
902 		 * The property name is the first string, value second
903 		 */
904 		namebuflen = strlen(opp->oprom_array);
905 		valbuf = opp->oprom_array + namebuflen + 1;
906 		valbuflen = strlen(valbuf);
907 
908 		if (cmd == OPROMSETOPT) {
909 			valsize = valbuflen + 1;  /* +1 for the '\0' */
910 		} else {
911 			if ((namebuflen + 1 + valbuflen + 1) > userbufsize) {
912 				error = EINVAL;
913 				break;
914 			}
915 			valsize = (opp->oprom_array + userbufsize) - valbuf;
916 		}
917 
918 		/*
919 		 * 4010173: 'name' is not an option, but it is a property.
920 		 */
921 		if (strcmp(opp->oprom_array, "name") == 0)
922 			error = EINVAL;
923 		else if (prom_setprop(node_id, opp->oprom_array,
924 		    valbuf, valsize) < 0)
925 			error = EINVAL;
926 
927 		break;
928 	}
929 
930 	case OPROMREADY64: {
931 		struct openprom_opr64 *opr =
932 		    (struct openprom_opr64 *)opp->oprom_array;
933 		int i;
934 		pnode_t id;
935 
936 		if (userbufsize < sizeof (*opr)) {
937 			error = EINVAL;
938 			break;
939 		}
940 
941 		valsize = userbufsize -
942 		    offsetof(struct openprom_opr64, message);
943 
944 		i = prom_version_check(opr->message, valsize, &id);
945 		opr->return_code = i;
946 		opr->nodeid = (int)id;
947 
948 		valsize = offsetof(struct openprom_opr64, message);
949 		valsize += strlen(opr->message) + 1;
950 
951 		/*
952 		 * copyout only the part of the user buffer we need to.
953 		 */
954 		if (copyout(opp, (void *)arg,
955 		    (size_t)(min((uint_t)valsize, userbufsize) +
956 		    sizeof (uint_t))) != 0)
957 			error = EFAULT;
958 		break;
959 
960 	}	/* case OPROMREADY64 */
961 
962 	case WANBOOT_SETKEY: {
963 		struct wankeyio *wp;
964 		int reslen;
965 		int status;
966 		int rv;
967 		int i;
968 
969 		/*
970 		 * The argument is a struct wankeyio.  Validate it as best
971 		 * we can.
972 		 */
973 		if (userbufsize != (sizeof (struct wankeyio))) {
974 			error = EINVAL;
975 			break;
976 		}
977 		if (copyin(((caddr_t)arg + sizeof (uint_t)),
978 		    opp->oprom_array, sizeof (struct wankeyio)) != 0) {
979 			error = EFAULT;
980 			break;
981 		}
982 		wp = (struct wankeyio *)opp->oprom_array;
983 
984 		/* check for key name and key size overflow */
985 		for (i = 0; i < WANBOOT_MAXKEYNAMELEN; i++)
986 			if (wp->wk_keyname[i] == '\0')
987 				break;
988 		if ((i == WANBOOT_MAXKEYNAMELEN) ||
989 		    (wp->wk_keysize > WANBOOT_MAXKEYLEN)) {
990 			error = EINVAL;
991 			break;
992 		}
993 
994 		rv = prom_set_security_key(wp->wk_keyname, wp->wk_u.key,
995 		    wp->wk_keysize, &reslen, &status);
996 		if (rv)
997 			error = EIO;
998 		else
999 			switch (status) {
1000 				case 0:
1001 					error = 0;
1002 					break;
1003 
1004 				case -2:	/* out of key storage space */
1005 					error = ENOSPC;
1006 					break;
1007 
1008 				case -3:	/* key name or value too long */
1009 					error = EINVAL;
1010 					break;
1011 
1012 				case -4:	/* can't delete:  no such key */
1013 					error = ENOENT;
1014 					break;
1015 
1016 				case -1:	/* unspecified error */
1017 				default:	/* this should not happen */
1018 					error = EIO;
1019 					break;
1020 			}
1021 		break;
1022 	}	/* case WANBOOT_SETKEY */
1023 #endif	/* !__i386 && !__amd64 */
1024 	}	/* switch (cmd)	*/
1025 
1026 	kmem_free(opp, userbufsize + sizeof (uint_t) + 1);
1027 	return (error);
1028 }
1029 
1030 /*ARGSUSED*/
1031 static int
1032 opromioctl(dev_t dev, int cmd, intptr_t arg, int mode,
1033 	cred_t *credp, int *rvalp)
1034 {
1035 	struct oprom_state *st;
1036 	struct opromioctl_args arg_block;
1037 
1038 	if (getminor(dev) >= MAX_OPENS)
1039 		return (ENXIO);
1040 
1041 	st = &oprom_state[getminor(dev)];
1042 	ASSERT(st->already_open);
1043 	arg_block.st = st;
1044 	arg_block.cmd = cmd;
1045 	arg_block.arg = arg;
1046 	arg_block.mode = mode;
1047 	return (prom_tree_access(opromioctl_cb, &arg_block, &st->tree_gen));
1048 }
1049 
1050 /*
1051  * Copyin string and verify the actual string length is less than maxsize
1052  * specified by the caller.
1053  *
1054  * Currently, maxsize is either OBP_MAXPROPNAME for property names
1055  * or MAXPATHLEN for device path names. userbufsize is specified
1056  * by the userland caller.
1057  */
1058 static int
1059 oprom_copyinstr(intptr_t arg, char *buf, size_t bufsize, size_t maxsize)
1060 {
1061 	int error;
1062 	size_t actual_len;
1063 
1064 	if ((error = copyinstr(((caddr_t)arg + sizeof (uint_t)),
1065 	    buf, bufsize, &actual_len)) != 0) {
1066 		return (error);
1067 	}
1068 	if ((actual_len == 0) || (actual_len > maxsize)) {
1069 		return (EINVAL);
1070 	}
1071 
1072 	return (0);
1073 }
1074 
1075 /*
1076  * Check pnode_t passed in from userland
1077  */
1078 static int
1079 oprom_checknodeid(pnode_t node_id, pnode_t current_id)
1080 {
1081 	int depth;
1082 	pnode_t id[OBP_STACKDEPTH];
1083 
1084 	/*
1085 	 * optimized path
1086 	 */
1087 	if (node_id == 0) {
1088 		return (1);
1089 	}
1090 	if (node_id == OBP_BADNODE) {
1091 		return (0);
1092 	}
1093 	if ((current_id != OBP_BADNODE) && ((node_id == current_id) ||
1094 	    (node_id == prom_nextnode(current_id)) ||
1095 	    (node_id == prom_childnode(current_id)))) {
1096 		return (1);
1097 	}
1098 
1099 	/*
1100 	 * long path: walk from root till we find node_id
1101 	 */
1102 	depth = 1;
1103 	id[0] = prom_nextnode((pnode_t)0);
1104 
1105 	while (depth) {
1106 		if (id[depth - 1] == node_id)
1107 			return (1);	/* node_id found */
1108 
1109 		if (id[depth] = prom_childnode(id[depth - 1])) {
1110 			depth++;
1111 			continue;
1112 		}
1113 
1114 		while (depth &&
1115 		    ((id[depth - 1] = prom_nextnode(id[depth - 1])) == 0))
1116 			depth--;
1117 	}
1118 	return (0);	/* node_id not found */
1119 }
1120 
1121 static int
1122 oprom_copytree(struct oprom_state *st, uint_t flag)
1123 {
1124 	ASSERT(st->snapshot == NULL && st->size == 0);
1125 	return (oprom_copynode(
1126 	    prom_nextnode(0), flag, &st->snapshot, &st->size));
1127 }
1128 
1129 static int
1130 oprom_snapshot(struct oprom_state *st, intptr_t arg)
1131 {
1132 	uint_t flag;
1133 
1134 	if (oprom_setstate(st, IOC_SNAP) == -1)
1135 		return (EBUSY);
1136 
1137 	/* copyin flag and create snapshot */
1138 	if ((copyin((void *)arg, &flag, sizeof (uint_t)) != 0) ||
1139 	    (oprom_copytree(st, flag) != 0)) {
1140 		(void) oprom_setstate(st, IOC_IDLE);
1141 		return (EFAULT);
1142 	}
1143 
1144 
1145 	/* copyout the size of the snapshot */
1146 	flag = (uint_t)st->size;
1147 	if (copyout(&flag, (void *)arg, sizeof (uint_t)) != 0) {
1148 		kmem_free(st->snapshot, st->size);
1149 		st->snapshot = NULL;
1150 		st->size = 0;
1151 		(void) oprom_setstate(st, IOC_IDLE);
1152 		return (EFAULT);
1153 	}
1154 
1155 	(void) oprom_setstate(st, IOC_DONE);
1156 	return (0);
1157 }
1158 
1159 static int
1160 oprom_copyout(struct oprom_state *st, intptr_t arg)
1161 {
1162 	int error = 0;
1163 	uint_t size;
1164 
1165 	if (oprom_setstate(st, IOC_COPY) == -1)
1166 		return (EBUSY);
1167 
1168 	/* copyin size and copyout snapshot */
1169 	if (copyin((void *)arg, &size, sizeof (uint_t)) != 0)
1170 		error = EFAULT;
1171 	else if (size < st->size)
1172 		error = EINVAL;
1173 	else if (copyout(st->snapshot, (void *)arg, st->size) != 0)
1174 		error = EFAULT;
1175 
1176 	if (error) {
1177 		/*
1178 		 * on error keep the snapshot until a successful
1179 		 * copyout or when the driver is closed.
1180 		 */
1181 		(void) oprom_setstate(st, IOC_DONE);
1182 		return (error);
1183 	}
1184 
1185 	kmem_free(st->snapshot, st->size);
1186 	st->snapshot = NULL;
1187 	st->size = 0;
1188 	(void) oprom_setstate(st, IOC_IDLE);
1189 	return (0);
1190 }
1191 
1192 /*
1193  * Copy all properties of nodeid into a single packed nvlist
1194  */
1195 static int
1196 oprom_copyprop(pnode_t nodeid, uint_t flag, nvlist_t *nvl)
1197 {
1198 	int proplen;
1199 	char *propname, *propval, *buf1, *buf2;
1200 
1201 	ASSERT(nvl != NULL);
1202 
1203 	/*
1204 	 * non verbose mode, get the "name" property only
1205 	 */
1206 	if (flag == 0) {
1207 		proplen = prom_getproplen(nodeid, "name");
1208 		if (proplen <= 0) {
1209 			cmn_err(CE_WARN,
1210 			    "failed to get the name of openprom node 0x%x",
1211 			    nodeid);
1212 			(void) nvlist_add_string(nvl, "name", "");
1213 			return (0);
1214 		}
1215 		propval = kmem_zalloc(proplen + 1, KM_SLEEP);
1216 		(void) prom_getprop(nodeid, "name", propval);
1217 		(void) nvlist_add_string(nvl, "name", propval);
1218 		kmem_free(propval, proplen + 1);
1219 		return (0);
1220 	}
1221 
1222 	/*
1223 	 * Ask for first property by passing a NULL string
1224 	 */
1225 	buf1 = kmem_alloc(OBP_MAXPROPNAME, KM_SLEEP);
1226 	buf2 = kmem_zalloc(OBP_MAXPROPNAME, KM_SLEEP);
1227 	buf1[0] = '\0';
1228 	while (propname = (char *)prom_nextprop(nodeid, buf1, buf2)) {
1229 		if (strlen(propname) == 0)
1230 			break;		/* end of prop list */
1231 		(void) strcpy(buf1, propname);
1232 
1233 		proplen = prom_getproplen(nodeid, propname);
1234 		if (proplen == 0) {
1235 			/* boolean property */
1236 			(void) nvlist_add_boolean(nvl, propname);
1237 			continue;
1238 		}
1239 		/* add 1 for null termination in case of a string */
1240 		propval = kmem_zalloc(proplen + 1, KM_SLEEP);
1241 		(void) prom_getprop(nodeid, propname, propval);
1242 		(void) nvlist_add_byte_array(nvl, propname,
1243 		    (uchar_t *)propval, proplen + 1);
1244 		kmem_free(propval, proplen + 1);
1245 		bzero(buf2, OBP_MAXPROPNAME);
1246 	}
1247 
1248 	kmem_free(buf1, OBP_MAXPROPNAME);
1249 	kmem_free(buf2, OBP_MAXPROPNAME);
1250 
1251 	return (0);
1252 }
1253 
1254 /*
1255  * Copy all children and descendents into a a packed nvlist
1256  */
1257 static int
1258 oprom_copychild(pnode_t nodeid, uint_t flag, char **buf, size_t *size)
1259 {
1260 	nvlist_t *nvl;
1261 	pnode_t child = prom_childnode(nodeid);
1262 
1263 	if (child == 0)
1264 		return (0);
1265 
1266 	(void) nvlist_alloc(&nvl, 0, KM_SLEEP);
1267 	while (child != 0) {
1268 		char *nodebuf = NULL;
1269 		size_t nodesize = 0;
1270 		if (oprom_copynode(child, flag, &nodebuf, &nodesize)) {
1271 			nvlist_free(nvl);
1272 			cmn_err(CE_WARN, "failed to copy nodeid 0x%x", child);
1273 			return (-1);
1274 		}
1275 		(void) nvlist_add_byte_array(nvl, "node",
1276 		    (uchar_t *)nodebuf, nodesize);
1277 		kmem_free(nodebuf, nodesize);
1278 		child = prom_nextnode(child);
1279 	}
1280 
1281 	(void) nvlist_pack(nvl, buf, size, NV_ENCODE_NATIVE, KM_SLEEP);
1282 	nvlist_free(nvl);
1283 	return (0);
1284 }
1285 
1286 /*
1287  * Copy a node into a packed nvlist
1288  */
1289 static int
1290 oprom_copynode(pnode_t nodeid, uint_t flag, char **buf, size_t *size)
1291 {
1292 	int error = 0;
1293 	nvlist_t *nvl;
1294 	char *childlist = NULL;
1295 	size_t childsize = 0;
1296 
1297 	(void) nvlist_alloc(&nvl, NV_UNIQUE_NAME, KM_SLEEP);
1298 	ASSERT(nvl != NULL);
1299 
1300 	/* @nodeid -- @ is not a legal char in a 1275 property name */
1301 	(void) nvlist_add_int32(nvl, "@nodeid", (int32_t)nodeid);
1302 
1303 	/* properties */
1304 	if (error = oprom_copyprop(nodeid, flag, nvl))
1305 		goto fail;
1306 
1307 	/* children */
1308 	error = oprom_copychild(nodeid, flag, &childlist, &childsize);
1309 	if (error != 0)
1310 		goto fail;
1311 	if (childlist != NULL) {
1312 		(void) nvlist_add_byte_array(nvl, "@child",
1313 		    (uchar_t *)childlist, (uint_t)childsize);
1314 		kmem_free(childlist, childsize);
1315 	}
1316 
1317 	/* pack into contiguous buffer */
1318 	error = nvlist_pack(nvl, buf, size, NV_ENCODE_NATIVE, KM_SLEEP);
1319 
1320 fail:
1321 	nvlist_free(nvl);
1322 	return (error);
1323 }
1324 
1325 /*
1326  * The driver is stateful across OPROMSNAPSHOT and OPROMCOPYOUT.
1327  * This function encapsulates the state machine:
1328  *
1329  *	-> IOC_IDLE -> IOC_SNAP -> IOC_DONE -> IOC_COPY ->
1330  *	|		SNAPSHOT		COPYOUT	 |
1331  *	--------------------------------------------------
1332  *
1333  * Returns 0 on success and -1 on failure
1334  */
1335 static int
1336 oprom_setstate(struct oprom_state *st, int16_t new_state)
1337 {
1338 	int ret = 0;
1339 
1340 	mutex_enter(&oprom_lock);
1341 	switch (new_state) {
1342 	case IOC_IDLE:
1343 	case IOC_DONE:
1344 		break;
1345 	case IOC_SNAP:
1346 		if (st->ioc_state != IOC_IDLE)
1347 			ret = -1;
1348 		break;
1349 	case IOC_COPY:
1350 		if (st->ioc_state != IOC_DONE)
1351 			ret = -1;
1352 		break;
1353 	default:
1354 		ret = -1;
1355 	}
1356 
1357 	if (ret == 0)
1358 		st->ioc_state = new_state;
1359 	else
1360 		cmn_err(CE_NOTE, "incorrect state transition from %d to %d",
1361 		    st->ioc_state, new_state);
1362 	mutex_exit(&oprom_lock);
1363 	return (ret);
1364 }
1365