1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 28 /* 29 * Console kbd multiplexor driver for Sun. 30 * The console "zs" port is linked under us, with the "kbd" module pushed 31 * on top of it. 32 * Minor device 0 is what programs normally use. 33 * Minor device 1 is used to feed predigested keystrokes to the "workstation 34 * console" driver, which it is linked beneath. 35 * 36 * 37 * This module can support multiple keyboards to be used simultaneously. 38 * and enable users to use at a time multiple keyboards connected to the 39 * same system. All the keyboards are linked under conskbd, and act as a 40 * keyboard with replicated keys. 41 * 42 * The DIN keyboards of SUN, for exmple , type 3/4/5, are supported via 43 * a two-level architecure. The lower one is one of serialport drivers, such 44 * as zs, se, and the upper is "kb" STREAMS module. Currenly, the serialport 45 * drivers don't support polled I/O interfaces, we couldn't group the keyboard 46 * of this kind under conskbd. So we do as the follows: 47 * 48 * A new ioctl CONSSETKBDTYPE interface between conskbd and lower 49 * keyboard drivers is added. When conskbd receives I_LINK or I_PLINK 50 * ioctl, it will send a CONSSETKBDTYPE ioctl to the driver which is 51 * requesting to be linked under conskbd. If the lower driver does't 52 * recognize this ioctl, the virtual keyboard will be disabled so that 53 * only one keyboard instance could be linked under conskbd. 54 */ 55 #define KEYMAP_SIZE_VARIABLE 56 57 #include <sys/types.h> 58 #include <sys/param.h> 59 #include <sys/stropts.h> 60 #include <sys/stream.h> 61 #include <sys/strsubr.h> 62 #include <sys/strsun.h> 63 #include <sys/conf.h> 64 #include <sys/stat.h> 65 #include <sys/errno.h> 66 #include <sys/modctl.h> 67 #include <sys/kbio.h> 68 #include <sys/ddi.h> 69 #include <sys/sunddi.h> 70 #include <sys/consdev.h> 71 #include <sys/note.h> 72 #include <sys/kmem.h> 73 #include <sys/kstat.h> 74 #include <sys/policy.h> 75 #include <sys/kbd.h> 76 #include <sys/kbtrans.h> 77 #include <sys/promif.h> 78 #include <sys/vuid_event.h> 79 #include <sys/conskbd.h> 80 #include <sys/beep.h> 81 82 extern struct keyboard *kbtrans_usbkb_maptab_init(void); 83 extern void kbtrans_usbkb_maptab_fini(struct keyboard **); 84 extern int ddi_create_internal_pathname(dev_info_t *, char *, int, minor_t); 85 86 /* 87 * Module linkage routines for the kernel 88 */ 89 static int conskbd_attach(dev_info_t *, ddi_attach_cmd_t); 90 static int conskbd_detach(dev_info_t *, ddi_detach_cmd_t); 91 static int conskbd_info(dev_info_t *, ddi_info_cmd_t, void *, void **); 92 93 /* 94 * STREAMS queue processing procedures 95 */ 96 static void conskbduwsrv(queue_t *); 97 static void conskbdlwserv(queue_t *); 98 static void conskbdlrput(queue_t *, mblk_t *); 99 static int conskbdclose(queue_t *, int, cred_t *); 100 static int conskbdopen(queue_t *, dev_t *, int, int, cred_t *); 101 102 103 /* STREAMS driver id and limit value struct */ 104 static struct module_info conskbdm_info = { 105 0, /* mi_idnum */ 106 "conskbd", /* mi_idname */ 107 0, /* mi_minpsz */ 108 1024, /* mi_maxpsz */ 109 2048, /* mi_hiwat */ 110 128 /* mi_lowat */ 111 }; 112 113 /* 114 * STREAMS queue processing procedure structures 115 */ 116 /* upper read queue processing procedure structures */ 117 static struct qinit conskbdurinit = { 118 NULL, /* qi_putp */ 119 (int (*)())NULL, /* qi_srvp */ 120 conskbdopen, /* qi_qopen */ 121 conskbdclose, /* qi_qclose */ 122 (int (*)())NULL, /* qi_qadmin */ 123 &conskbdm_info, /* qi_minfo */ 124 NULL /* qi_mstat */ 125 }; 126 127 /* upper write queue processing procedures structuresi */ 128 static struct qinit conskbduwinit = { 129 (int (*)())putq, /* qi_putp */ 130 (int (*)())conskbduwsrv, /* qi_srvp */ 131 conskbdopen, /* qi_qopen */ 132 conskbdclose, /* qi_qclose */ 133 (int (*)())NULL, /* qi_qadmin */ 134 &conskbdm_info, /* qi_minfo */ 135 NULL /* qi_mstat */ 136 }; 137 138 /* lower read queue processing procedures structures */ 139 static struct qinit conskbdlrinit = { 140 (int (*)())conskbdlrput, /* qi_putp */ 141 (int (*)())NULL, /* qi_srvp */ 142 (int (*)())NULL, /* qi_qopen */ 143 (int (*)())NULL, /* qi_qclose */ 144 (int (*)())NULL, /* qi_qadmin */ 145 &conskbdm_info, /* qi_minfo */ 146 NULL /* qi_mstat */ 147 }; 148 149 /* lower write processing procedures structures */ 150 static struct qinit conskbdlwinit = { 151 putq, /* qi_putp */ 152 (int (*)())conskbdlwserv, /* qi_srvp */ 153 (int (*)())NULL, /* qi_qopen */ 154 (int (*)())NULL, /* qi_qclose */ 155 (int (*)())NULL, /* qi_qadmin */ 156 &conskbdm_info, /* qi_minfo */ 157 NULL /* qi_mstat */ 158 }; 159 160 /* STREAMS entity declaration structure */ 161 static struct streamtab conskbd_str_info = { 162 &conskbdurinit, /* st_rdinit */ 163 &conskbduwinit, /* st_wrinit */ 164 &conskbdlrinit, /* st_muxrinit */ 165 &conskbdlwinit, /* st_muxwinit */ 166 }; 167 168 169 /* Entry points structure */ 170 static struct cb_ops cb_conskbd_ops = { 171 nulldev, /* cb_open */ 172 nulldev, /* cb_close */ 173 nodev, /* cb_strategy */ 174 nodev, /* cb_print */ 175 nodev, /* cb_dump */ 176 nodev, /* cb_read */ 177 nodev, /* cb_write */ 178 nodev, /* cb_ioctl */ 179 nodev, /* cb_devmap */ 180 nodev, /* cb_mmap */ 181 nodev, /* cb_segmap */ 182 nochpoll, /* cb_chpoll */ 183 ddi_prop_op, /* cb_prop_op */ 184 &conskbd_str_info, /* cb_stream */ 185 D_MP | D_MTOUTPERIM | D_MTOCEXCL /* cb_flag */ 186 }; 187 188 189 /* 190 * Device operations structure 191 */ 192 static struct dev_ops conskbd_ops = { 193 DEVO_REV, /* devo_rev */ 194 0, /* devo_refcnt */ 195 conskbd_info, /* devo_getinfo */ 196 nulldev, /* devo_identify */ 197 nulldev, /* devo_probe */ 198 conskbd_attach, /* devo_attach */ 199 conskbd_detach, /* devo_detach */ 200 nodev, /* devo_reset */ 201 &(cb_conskbd_ops), /* devo_cb_ops */ 202 (struct bus_ops *)NULL, /* devo_bus_ops */ 203 NULL, /* devo_power */ 204 ddi_quiesce_not_needed, /* quiesce */ 205 }; 206 207 /* 208 * Module linkage information for the kernel. 209 */ 210 static struct modldrv modldrv = { 211 &mod_driverops, /* Type of module. This one is a pseudo driver */ 212 "conskbd multiplexer driver", 213 &conskbd_ops, /* driver ops */ 214 }; 215 216 /* 217 * Module linkage structure 218 */ 219 static struct modlinkage modlinkage = { 220 MODREV_1, /* ml_rev */ 221 &modldrv, /* ml_linkage */ 222 NULL /* NULL terminates the list */ 223 }; 224 225 /* 226 * Debug printing 227 */ 228 #ifndef DPRINTF 229 #ifdef DEBUG 230 void conskbd_dprintf(const char *fmt, ...); 231 #define DPRINTF(l, m, args) \ 232 (((l) >= conskbd_errlevel) && ((m) & conskbd_errmask) ? \ 233 conskbd_dprintf args : \ 234 (void) 0) 235 236 /* 237 * Severity levels for printing 238 */ 239 #define PRINT_L0 0 /* print every message */ 240 #define PRINT_L1 1 /* debug */ 241 #define PRINT_L2 2 /* quiet */ 242 243 /* 244 * Masks 245 */ 246 #define PRINT_MASK_ALL 0xFFFFFFFFU 247 uint_t conskbd_errmask = PRINT_MASK_ALL; 248 uint_t conskbd_errlevel = PRINT_L2; 249 250 #else 251 #define DPRINTF(l, m, args) /* NOTHING */ 252 #endif 253 #endif 254 255 /* 256 * Module global data are protected by outer perimeter. Modifying 257 * these global data is executed in outer perimeter exclusively. 258 * Except in conskbdopen() and conskbdclose(), which are entered 259 * exclusively (Refer to D_MTOCEXCL flag), all changes for the 260 * global variables are protected by qwriter(). 261 */ 262 static queue_t *conskbd_regqueue; /* regular keyboard queue above us */ 263 static queue_t *conskbd_consqueue; /* console queue above us */ 264 265 266 static dev_info_t *conskbd_dip; /* private copy of devinfo pointer */ 267 static long conskbd_idle_stamp; /* seconds tstamp of latest keystroke */ 268 static struct keyboard *conskbd_keyindex; 269 270 /* 271 * Normally, kstats of type KSTAT_TYPE_NAMED have multiple elements. In 272 * this case we use this type for a single element because the ioctl code 273 * for it knows how to handle mixed kernel/user data models. Also, it 274 * will be easier to add new statistics later. 275 */ 276 static struct { 277 kstat_named_t idle_sec; /* seconds since last keystroke */ 278 } conskbd_kstat = { 279 { "idle_sec", KSTAT_DATA_LONG, } 280 }; 281 282 /* 283 * Local routines prototypes 284 */ 285 static int conskbd_kstat_update(kstat_t *, int); 286 287 static void conskbd_ioctl(queue_t *, mblk_t *); 288 static void conskbd_ioc_plink(queue_t *, mblk_t *); 289 static void conskbd_ioc_punlink(queue_t *, mblk_t *); 290 static void conskbd_legacy_kbd_ioctl(queue_t *, mblk_t *); 291 static void conskbd_virtual_kbd_ioctl(queue_t *, mblk_t *); 292 static mblk_t *conskbd_alloc_firm_event(ushort_t, int); 293 294 static conskbd_pending_msg_t *conskbd_mux_find_msg(mblk_t *); 295 static void conskbd_mux_enqueue_msg(conskbd_pending_msg_t *); 296 static void conskbd_mux_dequeue_msg(conskbd_pending_msg_t *); 297 static void conskbd_link_lowque_virt(queue_t *, mblk_t *); 298 static void conskbd_link_lowque_legacy(queue_t *, mblk_t *); 299 300 static void conskbd_handle_downstream_msg(queue_t *, mblk_t *); 301 static void conskbd_kioctype_complete(conskbd_lower_queue_t *, mblk_t *); 302 static void conskbd_kioctrans_complete(conskbd_lower_queue_t *, mblk_t *); 303 static void conskbd_kioclayout_complete(conskbd_lower_queue_t *, mblk_t *); 304 static void conskbd_kiocsled_complete(conskbd_lower_queue_t *, mblk_t *); 305 static void conskbd_mux_upstream_msg(conskbd_lower_queue_t *, mblk_t *); 306 static void conskbd_legacy_upstream_msg(conskbd_lower_queue_t *, mblk_t *); 307 static void conskbd_lqs_ack_complete(conskbd_lower_queue_t *, mblk_t *); 308 309 static void conskbd_polledio_enter(cons_polledio_arg_t); 310 static void conskbd_polledio_exit(cons_polledio_arg_t); 311 static int conskbd_polledio_ischar(cons_polledio_arg_t); 312 static int conskbd_polledio_getchar(cons_polledio_arg_t); 313 static void conskbd_polledio_setled(struct kbtrans_hardware *, int); 314 315 static void conskbd_streams_setled(struct kbtrans_hardware *, int); 316 static boolean_t conskbd_override_kbtrans(queue_t *, mblk_t *); 317 static boolean_t 318 conskbd_polled_keycheck(struct kbtrans_hardware *, 319 kbtrans_key_t *, enum keystate *); 320 321 /* 322 * Callbacks needed by kbtrans 323 */ 324 static struct kbtrans_callbacks conskbd_callbacks = { 325 conskbd_streams_setled, 326 conskbd_polledio_setled, 327 conskbd_polled_keycheck, 328 }; 329 330 /* 331 * Single private "global" lock for the few rare conditions 332 * we want single-threaded. 333 */ 334 static kmutex_t conskbd_msgq_lock; 335 static conskbd_pending_msg_t *conskbd_msg_queue; 336 337 /* 338 * The software state structure of virtual keyboard. 339 * Currently, only one virtual keyboard is supported. 340 */ 341 static conskbd_state_t conskbd = { 0 }; 342 343 /* This variable backs up the layout state for non-self-ID keyboards */ 344 static int kbd_layout_bak = 0; 345 346 /* 347 * _init() 348 * 349 * Description: 350 * Driver initialization, called when driver is first loaded. 351 * This is how access is initially given to all the static structures. 352 * 353 * Arguments: 354 * None 355 * 356 * Returns: 357 * ddi_soft_state_init() status, see ddi_soft_state_init(9f), or 358 * mod_install() status, see mod_install(9f) 359 */ 360 int 361 _init(void) 362 { 363 int error; 364 365 error = mod_install(&modlinkage); 366 if (error != 0) { 367 return (error); 368 } 369 370 conskbd_keyindex = kbtrans_usbkb_maptab_init(); 371 372 mutex_init(&conskbd_msgq_lock, NULL, MUTEX_DRIVER, NULL); 373 374 return (error); 375 376 } /* _init() */ 377 378 /* 379 * _fini() 380 * 381 * Description: 382 * Module de-initialization, called when the driver is to be unloaded. 383 * 384 * Arguments: 385 * None 386 * 387 * Returns: 388 * mod_remove() status, see mod_remove(9f) 389 */ 390 int 391 _fini(void) 392 { 393 int error; 394 395 error = mod_remove(&modlinkage); 396 if (error != 0) 397 return (error); 398 mutex_destroy(&conskbd_msgq_lock); 399 kbtrans_usbkb_maptab_fini(&conskbd_keyindex); 400 401 return (0); 402 403 } /* _fini() */ 404 405 /* 406 * _info() 407 * 408 * Description: 409 * Module information, returns information about the driver. 410 * 411 * Arguments: 412 * modinfo *modinfop Pointer to the opaque modinfo structure 413 * 414 * Returns: 415 * mod_info() status, see mod_info(9f) 416 */ 417 int 418 _info(struct modinfo *modinfop) 419 { 420 return (mod_info(&modlinkage, modinfop)); 421 422 } /* _info() */ 423 424 425 /* 426 * conskbd_attach() 427 * 428 * Description: 429 * This routine creates two device nodes. One is the "kbd" node, which 430 * is used by user application programs(such as Xserver).The other is the 431 * "conskbd" node, which is an internal node. consconfig_dacf module will 432 * open this internal node, and link the conskbd under the wc (workstaion 433 * console). 434 * 435 * Arguments: 436 * dev_info_t *dip Pointer to the device's dev_info struct 437 * ddi_attach_cmd_t cmd Attach command 438 * 439 * Returns: 440 * DDI_SUCCESS The driver was initialized properly 441 * DDI_FAILURE The driver couldn't be initialized properly 442 */ 443 /*ARGSUSED*/ 444 static int 445 conskbd_attach(dev_info_t *devi, ddi_attach_cmd_t cmd) 446 { 447 kstat_t *ksp; 448 449 switch (cmd) { 450 case DDI_ATTACH: 451 break; 452 453 default: 454 return (DDI_FAILURE); 455 456 } 457 if ((ddi_create_minor_node(devi, "kbd", S_IFCHR, 458 0, DDI_PSEUDO, NULL) == DDI_FAILURE) || 459 (ddi_create_internal_pathname(devi, "conskbd", S_IFCHR, 460 1) == DDI_FAILURE)) { 461 ddi_remove_minor_node(devi, NULL); 462 return (DDI_FAILURE); 463 } 464 conskbd_dip = devi; 465 466 ksp = kstat_create("conskbd", 0, "activity", "misc", KSTAT_TYPE_NAMED, 467 sizeof (conskbd_kstat) / sizeof (kstat_named_t), 468 KSTAT_FLAG_VIRTUAL); 469 if (ksp) { 470 ksp->ks_data = (void *) &conskbd_kstat; 471 ksp->ks_update = conskbd_kstat_update; 472 kstat_install(ksp); 473 conskbd_idle_stamp = gethrestime_sec(); /* initial value */ 474 } 475 476 conskbd.conskbd_layout = -1; /* invalid layout */ 477 conskbd.conskbd_led_state = -1; 478 conskbd.conskbd_bypassed = B_FALSE; 479 480 return (DDI_SUCCESS); 481 482 } /* conskbd_attach() */ 483 484 /* 485 * conskbd_detach() 486 * 487 * Description: 488 * Detach an instance of the conskbd driver. In fact, the driver can not 489 * be detached. 490 * 491 * Arguments: 492 * dev_info_t *dip Pointer to the device's dev_info struct 493 * ddi_detach_cmd_t cmd Detach command 494 * 495 * Returns: 496 * DDI_SUCCESS The driver was detached 497 * DDI_FAILURE The driver couldn't be detached 498 */ 499 /*ARGSUSED*/ 500 static int 501 conskbd_detach(dev_info_t *devi, ddi_detach_cmd_t cmd) 502 { 503 return (DDI_FAILURE); 504 505 } /* conskbd_detach() */ 506 507 /* ARGSUSED */ 508 static int 509 conskbd_info(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, 510 void **result) 511 { 512 register int error; 513 514 switch (infocmd) { 515 case DDI_INFO_DEVT2DEVINFO: 516 if (conskbd_dip == NULL) { 517 error = DDI_FAILURE; 518 } else { 519 *result = (void *) conskbd_dip; 520 error = DDI_SUCCESS; 521 } 522 break; 523 case DDI_INFO_DEVT2INSTANCE: 524 *result = (void *)0; 525 error = DDI_SUCCESS; 526 break; 527 default: 528 error = DDI_FAILURE; 529 } 530 return (error); 531 532 } /* conskbd_info() */ 533 534 /*ARGSUSED*/ 535 static int 536 conskbdopen(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *crp) 537 { 538 dev_t unit; 539 int err; 540 541 unit = getminor(*devp); 542 543 if (unit == 0) { 544 /* 545 * Opening "/dev/kbd". 546 */ 547 conskbd_regqueue = q; 548 qprocson(q); 549 return (0); 550 } else if (unit != 1) { 551 /* we don't do that under Bozo's Big Tent */ 552 return (ENODEV); 553 } 554 555 /* 556 * Check if already initialized 557 */ 558 if (conskbd_consqueue != NULL) 559 return (0); 560 561 /* 562 * Opening the device to be linked under the console. 563 */ 564 conskbd_consqueue = q; 565 566 if (secpolicy_console(crp) != 0) 567 return (EPERM); 568 569 /* 570 * initialize kbtrans module for conskbd 571 */ 572 err = kbtrans_streams_init(q, sflag, (struct kbtrans_hardware *) 573 &conskbd, &conskbd_callbacks, &conskbd.conskbd_kbtrans, 0, 0); 574 if (err != 0) 575 return (err); 576 kbtrans_streams_set_keyboard(conskbd.conskbd_kbtrans, KB_USB, 577 conskbd_keyindex); 578 579 conskbd.conskbd_polledio.cons_polledio_version = CONSPOLLEDIO_V1; 580 conskbd.conskbd_polledio.cons_polledio_argument = 581 (cons_polledio_arg_t)&conskbd; 582 conskbd.conskbd_polledio.cons_polledio_putchar = NULL; 583 conskbd.conskbd_polledio.cons_polledio_getchar = 584 (int (*)(cons_polledio_arg_t)) conskbd_polledio_getchar; 585 conskbd.conskbd_polledio.cons_polledio_ischar = 586 (boolean_t (*)(cons_polledio_arg_t))conskbd_polledio_ischar; 587 conskbd.conskbd_polledio.cons_polledio_enter = conskbd_polledio_enter; 588 conskbd.conskbd_polledio.cons_polledio_exit = conskbd_polledio_exit; 589 qprocson(q); 590 591 return (0); 592 593 } /* conskbdopen() */ 594 595 596 /*ARGSUSED*/ 597 static int 598 conskbdclose(queue_t *q, int flag, cred_t *crp) 599 { 600 if (q == conskbd_regqueue) { 601 602 conskbd_pending_msg_t *pmsg, *prev, *next; 603 mblk_t *mp; 604 605 /* switch the input stream back to conskbd_consqueue */ 606 conskbd.conskbd_directio = B_FALSE; 607 608 kbtrans_streams_untimeout(conskbd.conskbd_kbtrans); 609 kbtrans_streams_set_queue(conskbd.conskbd_kbtrans, 610 conskbd_consqueue); 611 qprocsoff(q); 612 conskbd_regqueue = NULL; 613 614 /* 615 * If there are any pending ioctls which conskbd hasn't 616 * responded to yet, remove them from conskbd_msg_queue. 617 * Otherwise, we might send the response to a nonexistent 618 * closed queue. Refer to: conskbd_mux_upstream_msg(). 619 */ 620 for (prev = NULL, pmsg = conskbd_msg_queue; pmsg != NULL; 621 pmsg = next) { 622 next = pmsg->kpm_next; 623 if (pmsg->kpm_upper_queue == WR(q)) { 624 if (prev == NULL) 625 conskbd_msg_queue = next; 626 else 627 prev->kpm_next = next; 628 629 while (pmsg->kpm_resp_list != NULL) { 630 mp = pmsg->kpm_resp_list; 631 pmsg->kpm_resp_list = mp->b_next; 632 mp->b_next = mp->b_prev = NULL; 633 freemsg(mp); 634 } 635 mutex_destroy(&pmsg->kpm_lock); 636 kmem_free(pmsg, sizeof (*pmsg)); 637 } else { 638 prev = pmsg; 639 } 640 } 641 } else if (q == conskbd_consqueue) { 642 /* 643 * Well, this is probably a mistake, but we will permit you 644 * to close the path to the console if you really insist. 645 */ 646 qprocsoff(q); 647 conskbd_consqueue = NULL; 648 } 649 650 return (0); 651 652 } /* conskbdclose() */ 653 654 /* 655 * Service procedure for upper write queue. 656 * To make sure the order of messages, we don't process any 657 * message in qi_putq() routine of upper write queue, instead the 658 * qi_putq() routine, which is a standard putq() routine, puts all 659 * messages into a queue, and lets the following service procedure 660 * deal with all messages. 661 * This routine is invoked when ioctl commands are send down 662 * by a consumer of the keyboard device, eg, when the keyboard 663 * consumer tries to determine the keyboard layout type, or sets 664 * the led states. 665 */ 666 static void 667 conskbduwsrv(queue_t *q) 668 { 669 mblk_t *mp; 670 queue_t *oldq; 671 enum kbtrans_message_response ret; 672 struct copyresp *csp; 673 struct freq_request *frqp; 674 int error; 675 676 while ((mp = getq(q)) != NULL) { 677 678 /* 679 * if the virtual keyboard is supported 680 */ 681 if (conskbd.conskbd_bypassed == B_FALSE) { 682 683 if (conskbd_override_kbtrans(q, mp) == B_TRUE) 684 continue; 685 /* 686 * The conskbd driver is a psaudo driver. It has two 687 * devcice nodes, one is used by kernel, and the other 688 * is used by end-users. There are two STREAMS queues 689 * corresponding to the two device nodes, console queue 690 * and regular queue. 691 * In conskbd_override_kbtrans() routine, when receives 692 * KIOCSDIRECT ioctl, we need change the direction of 693 * keyboard input messages, and direct the input stream 694 * from keyboard into right queue. It causes this queue 695 * to be switched between regular queue and console 696 * queue. And here, in this routine, the in-parameter 697 * "q" can be any one of the two. Moreover, this module 698 * is executed in multithreaded environment, even if the 699 * q is switched to regular queue, it is possible that 700 * the in-parameter is still the console queue, and we 701 * need to return response to right queue. 702 * The response is sent to upstream by the kbtrans 703 * module. so we need to save the old queue, and wait 704 * kbtrans to proces message and to send response out, 705 * and then switch back to old queue. 706 */ 707 oldq = kbtrans_streams_get_queue( 708 conskbd.conskbd_kbtrans); 709 kbtrans_streams_set_queue( 710 conskbd.conskbd_kbtrans, RD(q)); 711 ret = kbtrans_streams_message( 712 conskbd.conskbd_kbtrans, mp); 713 kbtrans_streams_set_queue( 714 conskbd.conskbd_kbtrans, oldq); 715 716 switch (ret) { 717 case KBTRANS_MESSAGE_HANDLED: 718 continue; 719 case KBTRANS_MESSAGE_NOT_HANDLED: 720 break; 721 } 722 } 723 724 switch (mp->b_datap->db_type) { 725 726 case M_IOCTL: 727 conskbd_ioctl(q, mp); 728 break; 729 730 case M_FLUSH: 731 if (*mp->b_rptr & FLUSHW) { 732 flushq(q, FLUSHDATA); 733 } 734 /* 735 * here, if flush read queue, some key-up messages 736 * may be lost so that upper module or applications 737 * treat corresponding keys as being held down for 738 * ever. 739 */ 740 freemsg(mp); 741 break; 742 743 case M_DATA: 744 /* 745 * virtual keyboard doesn't support this interface. 746 * only when it is disabled, we pass the message 747 * down to lower queue. 748 */ 749 if ((conskbd.conskbd_bypassed) && 750 (conskbd.conskbd_lqueue_nums > 0)) { 751 if (putq(conskbd.conskbd_lqueue_list-> 752 lqs_queue, mp) != 1) 753 freemsg(mp); 754 } else { 755 freemsg(mp); 756 } 757 break; 758 759 case M_IOCDATA: 760 /* 761 * Only deal with copyresp to KIOCSETFREQ 762 * transparent ioctl now 763 */ 764 csp = (struct copyresp *)mp->b_rptr; 765 if (csp->cp_rval) { 766 miocnak(q, mp, 0, EINVAL); 767 break; 768 } 769 770 error = 0; 771 switch (csp->cp_cmd) { 772 case KIOCSETFREQ: 773 frqp = (struct freq_request *)mp-> 774 b_cont->b_rptr; 775 776 switch (frqp->type) { 777 case CONSOLE_BEEP: 778 error = beeper_freq(BEEP_CONSOLE, 779 (int)frqp->freq); 780 break; 781 782 case KBD_BEEP: 783 error = beeper_freq(BEEP_TYPE4, 784 (int)frqp->freq); 785 break; 786 787 default: 788 error = 1; 789 } /* frqp->type */ 790 791 break; 792 793 default: 794 error = 1; 795 } /* csp->cp_cmd */ 796 797 if (error == 0) 798 miocack(q, mp, 0, 0); 799 else 800 miocnak(q, mp, 0, EINVAL); 801 802 break; 803 804 default: 805 /* 806 * Pass an error message up. 807 */ 808 mp->b_datap->db_type = M_ERROR; 809 if (mp->b_cont) { 810 freemsg(mp->b_cont); 811 mp->b_cont = NULL; 812 } 813 mp->b_rptr = mp->b_datap->db_base; 814 mp->b_wptr = mp->b_rptr + sizeof (char); 815 *mp->b_rptr = EINVAL; 816 qreply(q, mp); 817 } 818 } /* end of while */ 819 820 } /* conskbduwsrv() */ 821 822 static void 823 conskbd_ioctl(queue_t *q, mblk_t *mp) 824 { 825 struct iocblk *iocp; 826 int error = 0; 827 828 iocp = (struct iocblk *)mp->b_rptr; 829 830 switch (iocp->ioc_cmd) { 831 832 case I_LINK: 833 case I_PLINK: 834 if (conskbd.conskbd_bypassed == B_TRUE) { 835 /* 836 * A legacy keyboard can NOT be connected to conskbd together 837 * with other keyboards. So when a legacy keyboard is already 838 * linked under conkbd, we just reject all others. 839 */ 840 miocnak(q, mp, 0, EAGAIN); 841 break; 842 } 843 qwriter(q, mp, conskbd_ioc_plink, PERIM_OUTER); 844 break; 845 846 case I_UNLINK: 847 case I_PUNLINK: 848 qwriter(q, mp, conskbd_ioc_punlink, PERIM_OUTER); 849 break; 850 851 case KIOCSKABORTEN: 852 /* 853 * Check if privileged 854 */ 855 if ((error = secpolicy_sys_config(iocp->ioc_cr, B_FALSE))) { 856 miocnak(q, mp, 0, error); 857 return; 858 } 859 860 error = miocpullup(mp, sizeof (int)); 861 if (error != 0) { 862 miocnak(q, mp, 0, error); 863 return; 864 } 865 866 abort_enable = *(int *)mp->b_cont->b_rptr; 867 miocack(q, mp, 0, 0); 868 break; 869 870 case KIOCSETFREQ: 871 if (iocp->ioc_count != TRANSPARENT) { 872 /* 873 * We don't support non-transparent ioctls, 874 * i.e. I_STR ioctls 875 */ 876 miocnak(q, mp, 0, EINVAL); 877 } else { 878 /* Transparent ioctl */ 879 mcopyin(mp, NULL, sizeof (struct freq_request), NULL); 880 qreply(q, mp); 881 } 882 break; 883 884 default: 885 if (conskbd.conskbd_bypassed == B_TRUE) { 886 conskbd_legacy_kbd_ioctl(q, mp); 887 } else { 888 conskbd_virtual_kbd_ioctl(q, mp); 889 } 890 } 891 892 } /* conskbd_ioctl() */ 893 894 895 static void 896 conskbd_virtual_kbd_ioctl(queue_t *q, mblk_t *mp) 897 { 898 struct iocblk *iocp; 899 mblk_t *datap; 900 int cmd; 901 int error = 0; 902 903 iocp = (struct iocblk *)mp->b_rptr; 904 905 switch (iocp->ioc_cmd) { 906 case KIOCLAYOUT: 907 if ((datap = allocb(sizeof (int), BPRI_HI)) == NULL) { 908 miocnak(q, mp, 0, ENOMEM); 909 break; 910 } 911 912 if (conskbd.conskbd_layout == -1) 913 *(int *)datap->b_wptr = KBTRANS_USBKB_DEFAULT_LAYOUT; 914 else 915 *(int *)datap->b_wptr = conskbd.conskbd_layout; 916 917 datap->b_wptr += sizeof (int); 918 if (mp->b_cont) 919 freemsg(mp->b_cont); 920 mp->b_cont = datap; 921 miocack(q, mp, sizeof (int), 0); 922 break; 923 924 case KIOCSLAYOUT: 925 if (iocp->ioc_count != TRANSPARENT) { 926 miocnak(q, mp, 0, EINVAL); 927 break; 928 } 929 kbd_layout_bak = conskbd.conskbd_layout; 930 conskbd.conskbd_layout = *(intptr_t *)(mp->b_cont->b_rptr); 931 if (conskbd.conskbd_layout != kbd_layout_bak) { 932 933 /* notify the upper of the change event */ 934 if ((datap = conskbd_alloc_firm_event( 935 KEYBOARD_LAYOUT_CHANGE, 936 conskbd.conskbd_layout)) != NULL) { 937 if (conskbd.conskbd_directio) { 938 putnext(conskbd_regqueue, datap); 939 } else { 940 freemsg(datap); 941 } 942 } 943 } 944 miocack(q, mp, 0, 0); 945 break; 946 947 case CONSOPENPOLLEDIO: 948 error = miocpullup(mp, sizeof (struct cons_polledio *)); 949 if (error != 0) { 950 miocnak(q, mp, 0, error); 951 break; 952 } 953 if (conskbd.conskbd_lqueue_list == NULL) { 954 miocnak(q, mp, 0, EINVAL); 955 break; 956 } 957 conskbd_handle_downstream_msg(q, mp); 958 break; 959 960 case CONSCLOSEPOLLEDIO: 961 if (conskbd.conskbd_lqueue_list == NULL) { 962 miocnak(q, mp, 0, EINVAL); 963 break; 964 } 965 conskbd_handle_downstream_msg(q, mp); 966 break; 967 968 case CONSSETABORTENABLE: 969 /* 970 * To enable combined STOP-A(or F1-A) to trap into kmdb, 971 * the lower physical keyboard drivers are always told not 972 * to parse abort sequence(refer to consconfig_dacf module). 973 * Instead, lower drivers always send all keydown & keyup 974 * messages up to conskbd, so that when key STOP(or F1) is 975 * pressed on one keyboard and key A is pressed on another 976 * keyboard, the system could trap into kmdb. 977 * 978 * When we by kbtrans_streams_message() invoked kbtrans to 979 * handle ioctls in conskbduwsrv() routine, kbtrans module 980 * already handle the message though it returned to us a 981 * KBTRANS_MESSAGE_NOT_HANDLED. For virtual keyboard, no 982 * special initialization or un-initialization is needed. 983 * So we just return ACK to upper module. 984 */ 985 miocack(q, mp, 0, 0); 986 break; 987 988 case KIOCCMD: 989 case KIOCMKTONE: 990 if (conskbd.conskbd_lqueue_list == NULL || 991 mp->b_cont == NULL) { 992 miocnak(q, mp, 0, EINVAL); 993 break; 994 } 995 cmd = *(int *)mp->b_cont->b_rptr; 996 if (cmd == KBD_CMD_GETLAYOUT) { 997 freemsg(mp->b_cont); 998 datap = allocb(sizeof (int), BPRI_HI); 999 if (datap == NULL) { 1000 miocnak(q, mp, 0, ENOMEM); 1001 return; 1002 } 1003 if (conskbd.conskbd_layout == -1) 1004 *(int *)datap->b_wptr = 1005 KBTRANS_USBKB_DEFAULT_LAYOUT; 1006 else 1007 *(int *)datap->b_wptr = conskbd.conskbd_layout; 1008 1009 mp->b_cont = datap; 1010 miocack(q, mp, sizeof (int), 0); 1011 return; 1012 } 1013 conskbd_handle_downstream_msg(q, mp); 1014 break; 1015 1016 default: 1017 miocnak(q, mp, 0, EINVAL); 1018 break; 1019 } 1020 1021 } /* conskbd_virtual_kbd_ioctl() */ 1022 1023 static void 1024 conskbd_legacy_kbd_ioctl(queue_t *q, mblk_t *mp) 1025 { 1026 conskbd_lower_queue_t *lq; 1027 struct iocblk *iocp; 1028 int error = 0; 1029 1030 iocp = (struct iocblk *)mp->b_rptr; 1031 1032 ASSERT(conskbd.conskbd_lqueue_nums == 1); 1033 switch (iocp->ioc_cmd) { 1034 1035 case KIOCGDIRECT: { 1036 mblk_t *datap; 1037 1038 if ((datap = allocb(sizeof (int), BPRI_MED)) == NULL) { 1039 miocnak(q, mp, 0, ENOMEM); 1040 break; 1041 } 1042 1043 *(int *)datap->b_wptr = conskbd.conskbd_directio; 1044 datap->b_wptr += sizeof (int); 1045 if (mp->b_cont != NULL) { 1046 freemsg(mp->b_cont); 1047 mp->b_cont = NULL; 1048 } 1049 mp->b_cont = datap; 1050 miocack(q, mp, sizeof (int), 0); 1051 break; 1052 } 1053 1054 case KIOCSDIRECT: 1055 error = miocpullup(mp, sizeof (int)); 1056 if (error != 0) { 1057 miocnak(q, mp, 0, error); 1058 break; 1059 } 1060 conskbd.conskbd_directio = *(int *)mp->b_cont->b_rptr; 1061 1062 /* 1063 * Pass this through, if there's something to pass 1064 * it through to, so the system keyboard can reset 1065 * itself. 1066 */ 1067 if (conskbd.conskbd_lqueue_nums > 0) { 1068 lq = conskbd.conskbd_lqueue_list; 1069 ASSERT(lq && lq->lqs_next == NULL); 1070 if (putq(lq->lqs_queue, mp) != 1) { 1071 miocnak(q, mp, 0, ENOMEM); 1072 return; 1073 } 1074 break; 1075 } 1076 1077 miocack(q, mp, 0, 0); 1078 break; 1079 1080 default: 1081 /* 1082 * Pass this through, if there's something to pass it 1083 * through to; otherwise, reject it. 1084 */ 1085 if (conskbd.conskbd_lqueue_nums > 0) { 1086 lq = conskbd.conskbd_lqueue_list; 1087 ASSERT(lq && lq->lqs_next == NULL); 1088 if (putq(lq->lqs_queue, mp) != 1) { 1089 miocnak(q, mp, 0, ENOMEM); 1090 return; 1091 } 1092 break; 1093 } 1094 1095 /* nobody below us; reject it */ 1096 miocnak(q, mp, 0, EINVAL); 1097 break; 1098 } 1099 1100 } /* conskbd_legacy_kbd_ioctl() */ 1101 1102 1103 /* 1104 * Service procedure for lower write queue. 1105 * Puts things on the queue below us, if it lets us. 1106 */ 1107 static void 1108 conskbdlwserv(queue_t *q) 1109 { 1110 register mblk_t *mp; 1111 1112 while (canput(q->q_next) && (mp = getq(q)) != NULL) 1113 putnext(q, mp); 1114 1115 } /* conskbdlwserv() */ 1116 1117 /* 1118 * Put procedure for lower read queue. 1119 * Pass everything up to minor device 0 if "directio" set, otherwise to minor 1120 * device 1. 1121 */ 1122 static void 1123 conskbdlrput(queue_t *q, mblk_t *mp) 1124 { 1125 conskbd_lower_queue_t *lqs; 1126 struct iocblk *iocp; 1127 Firm_event *fe; 1128 1129 DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbdlrput\n")); 1130 1131 switch (mp->b_datap->db_type) { 1132 1133 case M_FLUSH: 1134 if (*mp->b_rptr == FLUSHR) { 1135 flushq(q, FLUSHDATA); /* XXX doesn't flush M_DELAY */ 1136 *mp->b_rptr &= ~FLUSHR; /* it has been flushed */ 1137 } 1138 if (*mp->b_rptr == FLUSHW) { 1139 flushq(WR(q), FLUSHDATA); 1140 qreply(q, mp); /* give the read queues a crack at it */ 1141 } else 1142 freemsg(mp); 1143 break; 1144 1145 case M_DATA: 1146 if (conskbd.conskbd_bypassed == B_FALSE) { 1147 1148 fe = (Firm_event *)mp->b_rptr; 1149 1150 /* 1151 * This is a workaround. 1152 * 1153 * According to HID specification, there are the 1154 * following keycode mapping between PS2 and USB, 1155 * 1156 * PS2 AT-101 keycode(29) ---> USB(49) 1157 * PS2 AT-102 keycode(42) ---> USB(50) 1158 * 1159 * However, the two keys, AT-101(29) and AT-102(42), 1160 * have the same scancode,0x2B, in PS2 scancode SET1 1161 * which we are using. The Kb8042 driver always 1162 * recognizes the two keys as PS2(29) so that we could 1163 * not know which is being pressed or released when we 1164 * receive scancode 0x2B. Fortunately, the two keys can 1165 * not co-exist in a specific layout. In other words, 1166 * in the table of keycode-to-symbol mapping, either 1167 * entry 49 or 50 is a hole. So, if we're processing a 1168 * keycode 49, we look at the entry for 49. If it's 1169 * HOLE, remap the key to 50; If we're processing a 50, 1170 * look at the entry for 50. If it's HOLE, we remap 1171 * the key to 49. 1172 */ 1173 if (fe->id == 49 || fe->id == 50) { 1174 if (conskbd_keyindex->k_normal[50] == HOLE) 1175 fe->id = 49; 1176 else 1177 fe->id = 50; 1178 } 1179 1180 /* 1181 * Remember key state of each key of lower physical 1182 * keyboard. When a keyboard is umplumbed from conskbd, 1183 * we will check all key states. By then, we will fake 1184 * a KEY_RELEASED message for each key in KEY_PRESSED 1185 * state. Otherwise, upper module will treat these keys 1186 * as held-down for ever. 1187 */ 1188 iocp = (struct iocblk *)mp->b_rptr; 1189 lqs = (conskbd_lower_queue_t *)q->q_ptr; 1190 if (fe->value) 1191 lqs->lqs_key_state[fe->id] = KEY_PRESSED; 1192 else 1193 lqs->lqs_key_state[fe->id] = KEY_RELEASED; 1194 1195 kbtrans_streams_key(conskbd.conskbd_kbtrans, 1196 fe->id, fe->value ? KEY_PRESSED : KEY_RELEASED); 1197 freemsg(mp); 1198 } else { 1199 if (conskbd.conskbd_directio) 1200 putnext(conskbd_regqueue, mp); 1201 else if (conskbd_consqueue != NULL) 1202 putnext(conskbd_consqueue, mp); 1203 else 1204 freemsg(mp); 1205 } 1206 conskbd_idle_stamp = gethrestime_sec(); 1207 break; 1208 1209 case M_IOCACK: 1210 case M_IOCNAK: 1211 iocp = (struct iocblk *)mp->b_rptr; 1212 lqs = (conskbd_lower_queue_t *)q->q_ptr; 1213 1214 DPRINTF(PRINT_L1, PRINT_MASK_ALL, ("conskbdlrput: " 1215 "ACK/NAK - cmd 0x%x\n", iocp->ioc_cmd)); 1216 1217 conskbd_lqs_ack_complete(lqs, mp); 1218 break; 1219 1220 case M_ERROR: 1221 case M_HANGUP: 1222 default: 1223 freemsg(mp); /* anything useful here? */ 1224 break; 1225 } 1226 1227 } /* conskbdlrput() */ 1228 1229 1230 /* ARGSUSED */ 1231 static int 1232 conskbd_kstat_update(kstat_t *ksp, int rw) 1233 { 1234 if (rw == KSTAT_WRITE) 1235 return (EACCES); 1236 1237 conskbd_kstat.idle_sec.value.l = gethrestime_sec() - conskbd_idle_stamp; 1238 1239 return (0); 1240 1241 } /* conskbd_kstat_update() */ 1242 1243 /* 1244 * STREAMS architecuture provides guarantee that the ID of each 1245 * message, iocblk.ioc_id, in a stream is unique. The following 1246 * routine performes the task: When receive request from upstream, 1247 * it saves the request in a global link list, clones the request, 1248 * and then sends a copy of the request to each of lower queues 1249 * which are plumbed into conskbd. And then, when receives responses 1250 * from lower queues in conskbdlrput() routine, we can know the 1251 * request matching received responses by searching the global linked 1252 * list to find the request which has the same message ID of the 1253 * response. Then, when all lower queues response this request, we 1254 * give a response to upstreams based the following policy: 1255 * If any one of lower queues acks our reuqest, then we return ack 1256 * to upstreams; only if all lower queues nak our request, we return 1257 * nak to upstreams. If all responses are nak, the error number of 1258 * the first response is sent to upstream. 1259 */ 1260 static void 1261 conskbd_handle_downstream_msg(queue_t *q, mblk_t *mp) 1262 { 1263 conskbd_pending_msg_t *msg; 1264 conskbd_lower_queue_t *lqs; 1265 struct iocblk *iocp; 1266 mblk_t *clonemp; 1267 int retry; 1268 1269 if (conskbd.conskbd_lqueue_nums == 0) { 1270 miocnak(q, mp, 0, EINVAL); 1271 return; 1272 } 1273 1274 msg = (conskbd_pending_msg_t *) 1275 kmem_zalloc(sizeof (conskbd_pending_msg_t), KM_SLEEP); 1276 mutex_init(&msg->kpm_lock, NULL, MUTEX_DRIVER, NULL); 1277 lqs = conskbd.conskbd_lqueue_list; 1278 iocp = (struct iocblk *)mp->b_rptr; 1279 1280 ASSERT(iocp->ioc_cmd == CONSOPENPOLLEDIO || 1281 iocp->ioc_cmd == CONSCLOSEPOLLEDIO || 1282 iocp->ioc_cmd == KIOCCMD || 1283 iocp->ioc_cmd == KIOCMKTONE); 1284 1285 msg->kpm_upper_queue = q; 1286 msg->kpm_req_msg = mp; 1287 msg->kpm_req_id = iocp->ioc_id; 1288 msg->kpm_req_cmd = iocp->ioc_cmd; 1289 msg->kpm_req_nums = conskbd.conskbd_lqueue_nums; 1290 conskbd_mux_enqueue_msg(msg); 1291 1292 for (retry = 0, lqs = conskbd.conskbd_lqueue_list; lqs; ) { 1293 1294 /* 1295 * if a lower physical keyboard is not in polled I/O 1296 * mode, we couldn't send CONSCLOSEPOLLEDIO to it, 1297 * otherwise, system will panic. 1298 */ 1299 if (iocp->ioc_cmd == CONSCLOSEPOLLEDIO && 1300 lqs->lqs_polledio == NULL) { 1301 lqs = lqs->lqs_next; 1302 msg->kpm_req_nums --; 1303 retry = 0; 1304 continue; 1305 } 1306 1307 clonemp = copymsg(mp); 1308 if (clonemp != NULL) { 1309 if (putq(lqs->lqs_queue, clonemp) == 1) { 1310 lqs = lqs->lqs_next; 1311 retry = 0; 1312 continue; 1313 } 1314 1315 /* 1316 * failed to invoke putq(), retry. 1317 */ 1318 freemsg(clonemp); 1319 } 1320 1321 /* 1322 * During testing it was observed that occasionally 1323 * copymsg() would fail during boot. The reason for 1324 * these failures is unknown. Since we really want 1325 * to successfully plumb up all the attached keyboards 1326 * during boot we do a best effort here by retrying 1327 * the copymsg() call in the hopes that it will 1328 * succeeded upon subsequent invocations. 1329 * 1330 * If all the calls to copymsg() fails, it will cause 1331 * the corresponding keyboard to be unavailable, or 1332 * or behave weirdly, 1333 * 1334 * 1) for CONSOPENPOLLEDIO 1335 * if copymsg()fails, the corresponding keyboard 1336 * is not available in polled I/O mode once 1337 * entering kmdb; 1338 * 2) for CONSCLOSEPOLLEDIO 1339 * if copymsg() fails, the corresponding keyboard 1340 * is not available in normal mode once returning 1341 * from kmdb; 1342 * 3) for KIOCCMD 1343 * 3.1) for KBD_CMD_NOBELL 1344 * there's no beep in USB and PS2 keyboard, 1345 * this ioctl actually disables the beep on 1346 * system mainboard. Note that all the cloned 1347 * messages sent down to lower queues do the 1348 * same job for system mainboard. Therefore, 1349 * even if we fail to send this ioctl to most 1350 * of lower queues, the beep still would be 1351 * disabled. So, no trouble exists here. 1352 * 3.2) for others 1353 * nothing; 1354 * 1355 * However, all cases could be resume next time when the 1356 * same request comes again. 1357 */ 1358 if (retry ++ >= 5) { 1359 dev_t devt; 1360 char path[MAXPATHLEN + 1]; 1361 1362 devt = lqs->lqs_queue->q_stream->sd_vnode->v_rdev; 1363 switch (iocp->ioc_cmd) { 1364 case CONSOPENPOLLEDIO: 1365 if (ddi_dev_pathname(devt, S_IFCHR, 1366 path) == DDI_SUCCESS) 1367 cmn_err(CE_WARN, "conskbd: " 1368 "keyboard is not available" 1369 " for system debugging: %s", 1370 path); 1371 break; 1372 1373 case CONSCLOSEPOLLEDIO: 1374 if (ddi_dev_pathname(devt, S_IFCHR, 1375 path) == DDI_SUCCESS) 1376 cmn_err(CE_WARN, "conskbd: " 1377 "keyboard is not available:" 1378 " %s", path); 1379 break; 1380 1381 default: 1382 break; 1383 } 1384 msg->kpm_req_nums --; 1385 lqs = lqs->lqs_next; 1386 retry = 0; 1387 } 1388 } 1389 1390 if (msg->kpm_req_nums == 0) { 1391 conskbd_mux_dequeue_msg(msg); 1392 kmem_free(msg, sizeof (*msg)); 1393 miocnak(q, mp, 0, ENOMEM); 1394 } 1395 1396 } /* conskbd_handle_downstream_msg() */ 1397 1398 1399 static void 1400 conskbd_ioc_plink(queue_t *q, mblk_t *mp) 1401 { 1402 mblk_t *req; 1403 queue_t *lowque; 1404 struct linkblk *linkp; 1405 conskbd_lower_queue_t *lqs; 1406 1407 lqs = kmem_zalloc(sizeof (*lqs), KM_SLEEP); 1408 ASSERT(lqs->lqs_state == LQS_UNINITIALIZED); 1409 1410 linkp = (struct linkblk *)mp->b_cont->b_rptr; 1411 lowque = linkp->l_qbot; 1412 1413 lqs->lqs_queue = lowque; 1414 lqs->lqs_pending_plink = mp; 1415 lqs->lqs_pending_queue = q; 1416 1417 req = mkiocb(CONSSETKBDTYPE); 1418 if (req == NULL) { 1419 miocnak(q, mp, 0, ENOMEM); 1420 kmem_free(lqs, sizeof (*lqs)); 1421 return; 1422 } 1423 1424 req->b_cont = allocb(sizeof (int), BPRI_MED); 1425 if (req->b_cont == NULL) { 1426 freemsg(req); 1427 miocnak(q, mp, 0, ENOMEM); 1428 kmem_free(lqs, sizeof (*lqs)); 1429 return; 1430 } 1431 1432 lowque->q_ptr = lqs; 1433 OTHERQ(lowque)->q_ptr = lqs; 1434 *(int *)req->b_cont->b_wptr = KB_USB; 1435 req->b_cont->b_wptr += sizeof (int); 1436 1437 lqs->lqs_state = LQS_KIOCTYPE_ACK_PENDING; 1438 1439 if (putq(lowque, req) != 1) { 1440 freemsg(req); 1441 miocnak(lqs->lqs_pending_queue, 1442 lqs->lqs_pending_plink, 0, ENOMEM); 1443 lowque->q_ptr = NULL; 1444 OTHERQ(lowque)->q_ptr = NULL; 1445 kmem_free(lqs, sizeof (*lqs)); 1446 } 1447 1448 } /* conskbd_ioc_plink() */ 1449 1450 1451 static void 1452 conskbd_ioc_punlink(queue_t *q, mblk_t *mp) 1453 { 1454 int index; 1455 struct linkblk *linkp; 1456 conskbd_lower_queue_t *lqs; 1457 conskbd_lower_queue_t *prev; 1458 1459 linkp = (struct linkblk *)mp->b_cont->b_rptr; 1460 prev = conskbd.conskbd_lqueue_list; 1461 for (lqs = prev; lqs; lqs = lqs->lqs_next) { 1462 if (lqs->lqs_queue == linkp->l_qbot) { 1463 if (prev == lqs) 1464 conskbd.conskbd_lqueue_list = 1465 lqs->lqs_next; 1466 else 1467 prev->lqs_next = lqs->lqs_next; 1468 1469 lqs->lqs_queue->q_ptr = NULL; 1470 OTHERQ(lqs->lqs_queue)->q_ptr = NULL; 1471 conskbd.conskbd_lqueue_nums --; 1472 if (conskbd.conskbd_lqueue_nums == 0) { 1473 kbd_layout_bak = conskbd.conskbd_layout; 1474 conskbd.conskbd_layout = -1; 1475 } 1476 1477 for (index = 0; index < KBTRANS_KEYNUMS_MAX; index ++) { 1478 if (lqs->lqs_key_state[index] == KEY_PRESSED) 1479 kbtrans_streams_key( 1480 conskbd.conskbd_kbtrans, 1481 index, 1482 KEY_RELEASED); 1483 } 1484 1485 kmem_free(lqs, sizeof (*lqs)); 1486 miocack(q, mp, 0, 0); 1487 return; 1488 } 1489 prev = lqs; 1490 } 1491 miocnak(q, mp, 0, EINVAL); 1492 1493 } /* conskbd_ioc_punlink() */ 1494 1495 /* 1496 * Every physical keyboard has a corresponding STREAMS queue. We call this 1497 * queue lower queue. Every lower queue has a state, refer to conskbd.h file 1498 * about "enum conskbd_lqs_state". 1499 * The following routine is used to handle response messages from lower queue. 1500 * When receiving ack/nak message from lower queue(s), the routine determines 1501 * the passage for it according to the current state of this lower queue. 1502 */ 1503 static void 1504 conskbd_lqs_ack_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) 1505 { 1506 switch (lqs->lqs_state) { 1507 1508 /* S6: working in virtual keyboard mode, multi-keyboards are usable */ 1509 case LQS_INITIALIZED: 1510 conskbd_mux_upstream_msg(lqs, mp); 1511 break; 1512 1513 /* S5: working in legacy mode, only one keyboard is usable */ 1514 case LQS_INITIALIZED_LEGACY: 1515 conskbd_legacy_upstream_msg(lqs, mp); 1516 break; 1517 1518 /* S4: wait lower queue to acknowledge KIOCSLED/KIOCGLED message */ 1519 case LQS_KIOCSLED_ACK_PENDING: 1520 conskbd_kiocsled_complete(lqs, mp); 1521 break; 1522 1523 /* S3: wait lower queue to acknowledge KIOCLAYOUT message */ 1524 case LQS_KIOCLAYOUT_ACK_PENDING: 1525 conskbd_kioclayout_complete(lqs, mp); 1526 break; 1527 1528 /* S2: wait lower queue to acknowledge KIOCTRANS message */ 1529 case LQS_KIOCTRANS_ACK_PENDING: 1530 conskbd_kioctrans_complete(lqs, mp); 1531 break; 1532 1533 /* S1: wait lower queue to acknowledge KIOCTYPE message */ 1534 case LQS_KIOCTYPE_ACK_PENDING: 1535 conskbd_kioctype_complete(lqs, mp); 1536 break; 1537 1538 /* if reaching here, there must be a error */ 1539 default: 1540 freemsg(mp); 1541 cmn_err(CE_WARN, "conskbd: lqs_ack_complete() state error"); 1542 break; 1543 } 1544 1545 } /* conskbd_lqs_ack_complete() */ 1546 1547 1548 static void 1549 conskbd_kioctype_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) 1550 { 1551 struct iocblk *iocp; 1552 mblk_t *req; 1553 queue_t *lowerque; 1554 int err = ENOMEM; 1555 1556 ASSERT(lqs->lqs_pending_plink); 1557 ASSERT(lqs->lqs_state == LQS_KIOCTYPE_ACK_PENDING); 1558 1559 lowerque = lqs->lqs_queue; 1560 1561 switch (mp->b_datap->db_type) { 1562 case M_IOCACK: 1563 req = mkiocb(KIOCTRANS); 1564 if (req == NULL) { 1565 goto err_exit; 1566 } 1567 1568 req->b_cont = allocb(sizeof (int), BPRI_MED); 1569 if (req->b_cont == NULL) { 1570 freemsg(req); 1571 goto err_exit; 1572 } 1573 1574 /* Set the translate mode to TR_UNTRANS_EVENT */ 1575 *(int *)req->b_cont->b_wptr = TR_UNTRANS_EVENT; 1576 req->b_cont->b_wptr += sizeof (int); 1577 1578 /* Ready to handle the response to KIOCTRANS */ 1579 lqs->lqs_state = LQS_KIOCTRANS_ACK_PENDING; 1580 1581 if (putq(lowerque, req) != 1) { 1582 freemsg(req); 1583 goto err_exit; 1584 } 1585 freemsg(mp); 1586 return; 1587 1588 case M_IOCNAK: 1589 /* 1590 * The lower keyboard driver can't mimic USB keyboard, 1591 * that's say, the physical keyboard is an old one, such 1592 * as TYPE 3/4/5 one. In this case, the virtual keyboard 1593 * is disabled, and the data from lower keyboard driver 1594 * will bypass the conskbd module. 1595 */ 1596 1597 /* 1598 * if there is any other keyborad already linked under the 1599 * conskbd, we reject the current one. 1600 */ 1601 if (conskbd.conskbd_lqueue_nums > 0) { 1602 iocp = (struct iocblk *)mp->b_rptr; 1603 err = iocp->ioc_error; 1604 goto err_exit; 1605 } 1606 1607 /* 1608 * link this keyboard under conskbd. 1609 */ 1610 qwriter(lowerque, mp, conskbd_link_lowque_legacy, PERIM_OUTER); 1611 return; 1612 } 1613 1614 err_exit: 1615 miocnak(lqs->lqs_pending_queue, lqs->lqs_pending_plink, 0, err); 1616 lowerque->q_ptr = NULL; 1617 OTHERQ(lowerque)->q_ptr = NULL; 1618 kmem_free(lqs, sizeof (*lqs)); 1619 freemsg(mp); 1620 1621 } /* conskbd_kioctype_complete() */ 1622 1623 static void 1624 conskbd_kioctrans_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) 1625 { 1626 struct iocblk *iocp; 1627 mblk_t *req; 1628 queue_t *lowerque; 1629 int err = ENOMEM; 1630 1631 ASSERT(lqs->lqs_pending_plink != NULL); 1632 ASSERT(lqs->lqs_state == LQS_KIOCTRANS_ACK_PENDING); 1633 1634 lowerque = lqs->lqs_queue; 1635 1636 switch (mp->b_datap->db_type) { 1637 case M_IOCACK: 1638 req = mkiocb(KIOCLAYOUT); 1639 if (req == NULL) { 1640 goto err_exit; 1641 } 1642 1643 req->b_cont = allocb(sizeof (int), BPRI_MED); 1644 if (req->b_cont == NULL) { 1645 freemsg(req); 1646 goto err_exit; 1647 } 1648 1649 /* waiting for response to KIOCLAYOUT */ 1650 lqs->lqs_state = LQS_KIOCLAYOUT_ACK_PENDING; 1651 if (putq(lqs->lqs_queue, req) != 1) { 1652 freemsg(req); 1653 goto err_exit; 1654 } 1655 freemsg(mp); 1656 return; 1657 1658 case M_IOCNAK: 1659 iocp = (struct iocblk *)mp->b_rptr; 1660 err = iocp->ioc_error; 1661 goto err_exit; 1662 } 1663 1664 err_exit: 1665 miocnak(lqs->lqs_pending_queue, lqs->lqs_pending_plink, 0, err); 1666 lowerque->q_ptr = NULL; 1667 OTHERQ(lowerque)->q_ptr = NULL; 1668 kmem_free(lqs, sizeof (*lqs)); 1669 freemsg(mp); 1670 1671 } /* conskbd_kioctrans_complete() */ 1672 1673 /* 1674 * Allocate a firm event 1675 */ 1676 static mblk_t * 1677 conskbd_alloc_firm_event(ushort_t id, int value) 1678 { 1679 mblk_t *mb; 1680 Firm_event *fe; 1681 1682 if ((mb = allocb(sizeof (Firm_event), BPRI_HI)) != NULL) { 1683 fe = (Firm_event *)mb->b_wptr; 1684 fe->id = id; 1685 fe->pair_type = FE_PAIR_NONE; 1686 fe->pair = NULL; 1687 fe->value = value; 1688 mb->b_wptr += sizeof (Firm_event); 1689 } 1690 1691 return (mb); 1692 } 1693 1694 static void 1695 conskbd_kioclayout_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) 1696 { 1697 mblk_t *req; 1698 int layout; 1699 boolean_t fail; 1700 1701 ASSERT(lqs->lqs_pending_plink != NULL); 1702 ASSERT(lqs->lqs_state == LQS_KIOCLAYOUT_ACK_PENDING); 1703 1704 switch (mp->b_datap->db_type) { 1705 case M_IOCACK: 1706 if (miocpullup(mp, sizeof (int)) == 0) { 1707 layout = *(int *)mp->b_cont->b_rptr; 1708 /* 1709 * We just accept the layout of the first keyboard 1710 * requesting to be linked under conskbd. If current 1711 * keyboard is the first one, and if we get right 1712 * layout from it, we set conskbd's layout 1713 */ 1714 if (layout != -1 && conskbd.conskbd_layout == -1) { 1715 if (layout == 0) { 1716 conskbd.conskbd_layout = kbd_layout_bak; 1717 } else { 1718 conskbd.conskbd_layout = layout; 1719 if (layout == kbd_layout_bak) { 1720 break; 1721 } 1722 if ((req = conskbd_alloc_firm_event( 1723 KEYBOARD_LAYOUT_CHANGE, 1724 layout)) != NULL) { 1725 if (conskbd.conskbd_directio) { 1726 putnext( 1727 conskbd_regqueue, 1728 req); 1729 } else if (conskbd_consqueue 1730 != NULL) { 1731 putnext( 1732 conskbd_consqueue, 1733 req); 1734 } else { 1735 freemsg(req); 1736 } 1737 } 1738 } 1739 } 1740 } 1741 break; 1742 1743 1744 /* if fail, leave conskbd's layout as it is */ 1745 case M_IOCNAK: 1746 break; 1747 } 1748 1749 fail = B_TRUE; 1750 1751 if (conskbd.conskbd_led_state == -1) 1752 req = mkiocb(KIOCGLED); 1753 else 1754 req = mkiocb(KIOCSLED); 1755 1756 if (req) { 1757 req->b_cont = allocb(sizeof (uchar_t), BPRI_MED); 1758 if (req->b_cont) { 1759 if (conskbd.conskbd_led_state != -1) { 1760 *(uchar_t *)req->b_cont->b_wptr = 1761 conskbd.conskbd_led_state; 1762 req->b_cont->b_wptr += sizeof (uchar_t); 1763 } 1764 1765 /* waiting for response to KIOCSLED */ 1766 lqs->lqs_state = LQS_KIOCSLED_ACK_PENDING; 1767 if (putq(lqs->lqs_queue, req) == 1) { 1768 fail = B_FALSE; 1769 } else { 1770 freemsg(req); 1771 } 1772 1773 } else { 1774 freemsg(req); 1775 } 1776 } 1777 1778 if (fail) { 1779 /* 1780 * If fail to allocate KIOCSLED/KIOCGLED message or put 1781 * the message into lower queue, we immediately link 1782 * current keyboard under conskbd. Thus, even if fails 1783 * to set/get LED, this keyboard could be available. 1784 */ 1785 qwriter(lqs->lqs_queue, 1786 mp, conskbd_link_lowque_virt, PERIM_OUTER); 1787 } else { 1788 freemsg(mp); 1789 } 1790 1791 } /* conskbd_kioclayout_complete() */ 1792 1793 1794 static void 1795 conskbd_kiocsled_complete(conskbd_lower_queue_t *lqs, mblk_t *mp) 1796 { 1797 int led_state; 1798 1799 ASSERT(lqs->lqs_pending_plink != NULL); 1800 ASSERT(lqs->lqs_state == LQS_KIOCSLED_ACK_PENDING); 1801 1802 if (conskbd.conskbd_led_state == -1) { 1803 switch (mp->b_datap->db_type) { 1804 case M_IOCACK: 1805 if (miocpullup(mp, sizeof (uchar_t)) == 0) { 1806 led_state = *(uchar_t *)mp->b_cont->b_rptr; 1807 conskbd.conskbd_led_state = led_state; 1808 kbtrans_streams_setled(conskbd.conskbd_kbtrans, 1809 led_state); 1810 } 1811 break; 1812 1813 /* if fail, leave conskbd's led_state as it is */ 1814 case M_IOCNAK: 1815 break; 1816 } 1817 } 1818 1819 /* 1820 * Basically, failure of setting/getting LED is not a fatal 1821 * error, so we will plumb the lower queue into conskbd whether 1822 * setting/getting LED succeeds or fails. 1823 */ 1824 qwriter(lqs->lqs_queue, mp, conskbd_link_lowque_virt, PERIM_OUTER); 1825 1826 } /* conskbd_kiocsled_complete() */ 1827 1828 1829 static void 1830 conskbd_mux_upstream_msg(conskbd_lower_queue_t *lqs, mblk_t *mp) 1831 { 1832 conskbd_pending_msg_t *msg; 1833 struct iocblk *iocp; 1834 int error; 1835 dev_t devt; 1836 char path[MAXPATHLEN + 1]; 1837 1838 ASSERT(lqs->lqs_state == LQS_INITIALIZED); 1839 msg = conskbd_mux_find_msg(mp); 1840 1841 if (!msg) { 1842 /* 1843 * Here we discard the response if: 1844 * 1845 * 1. It's an KIOCSLED request; see conskbd_streams_setled(). 1846 * 2. The application has already closed the upper stream; 1847 * see conskbdclose() 1848 */ 1849 freemsg(mp); 1850 return; 1851 } 1852 1853 /* 1854 * We use the b_next field of mblk_t structure to link all 1855 * response coming from lower queues into a linkage list, 1856 * and make use of the b_prev field to save a pointer to 1857 * the lower queue from which the current response message 1858 * comes. 1859 */ 1860 ASSERT(mp->b_next == NULL && mp->b_prev == NULL); 1861 mutex_enter(&msg->kpm_lock); 1862 mp->b_next = msg->kpm_resp_list; 1863 mp->b_prev = (mblk_t *)lqs; 1864 msg->kpm_resp_list = mp; 1865 msg->kpm_resp_nums ++; 1866 1867 if (msg->kpm_resp_nums < msg->kpm_req_nums) { 1868 mutex_exit(&msg->kpm_lock); 1869 return; 1870 } 1871 1872 ASSERT(msg->kpm_resp_nums == msg->kpm_req_nums); 1873 ASSERT(mp == msg->kpm_resp_list); 1874 1875 mutex_exit(&msg->kpm_lock); 1876 1877 conskbd_mux_dequeue_msg(msg); 1878 1879 1880 /* 1881 * Here, we have the policy that, if any one lower queue ACK 1882 * our reuqest, then we return ACK to upstreams; only if all 1883 * lower queues NAK our request, we return NAK to upstreams. 1884 * if all responses are nak, the errno of the first response 1885 * is sent to upstreams 1886 */ 1887 ASSERT(mp->b_rptr); 1888 error = ((struct iocblk *)mp->b_rptr)->ioc_error; 1889 1890 switch (msg->kpm_req_cmd) { 1891 case CONSOPENPOLLEDIO: 1892 /* 1893 * Here, we can safely ignore the NAK message. If any one lower 1894 * queue returns NAK, the pointer to the corresponding polledio 1895 * structure will remain null, that's say lqs->lqs_polledio = 1896 * null. When we need to invoke polled I/O interface, we will 1897 * check if the pointer is null. 1898 */ 1899 for (mp = msg->kpm_resp_list; mp; ) { 1900 cons_polledio_t *polledio; 1901 1902 msg->kpm_resp_list = mp->b_next; 1903 lqs = (conskbd_lower_queue_t *)mp->b_prev; 1904 devt = lqs->lqs_queue->q_stream->sd_vnode->v_rdev; 1905 if (mp->b_datap->db_type == M_IOCACK) { 1906 polledio = *(struct cons_polledio **) 1907 mp->b_cont->b_rptr; 1908 if (polledio->cons_polledio_version == 1909 CONSPOLLEDIO_V1) { 1910 lqs->lqs_polledio = polledio; 1911 error = 0; 1912 } else { 1913 /* 1914 * USB and PS2 keyboard drivers should 1915 * use the same cons_polledio structure 1916 * as conskbd. 1917 */ 1918 if (ddi_dev_pathname(devt, S_IFCHR, 1919 path) == DDI_SUCCESS) { 1920 cmn_err(CE_WARN, "keyboard " 1921 "driver does not support " 1922 "system debugging: %s", 1923 path); 1924 } 1925 error = EINVAL; 1926 } 1927 } else { 1928 if (ddi_dev_pathname(devt, S_IFCHR, path) == 1929 DDI_SUCCESS) { 1930 cmn_err(CE_WARN, "conskbd: keyboard is" 1931 " not available for system" 1932 " debugging: %s", path); 1933 } 1934 } 1935 mp->b_next = NULL; 1936 mp->b_prev = NULL; 1937 freemsg(mp); 1938 mp = msg->kpm_resp_list; 1939 } 1940 1941 mp = msg->kpm_req_msg; 1942 if (error == 0) { 1943 *(struct cons_polledio **)mp->b_cont->b_rptr = 1944 &conskbd.conskbd_polledio; 1945 } 1946 break; 1947 1948 case CONSCLOSEPOLLEDIO: 1949 for (mp = msg->kpm_resp_list; mp; ) { 1950 msg->kpm_resp_list = mp->b_next; 1951 lqs = (conskbd_lower_queue_t *)mp->b_prev; 1952 if (mp->b_datap->db_type == M_IOCACK) { 1953 lqs->lqs_polledio = NULL; 1954 error = 0; 1955 } else { 1956 devt = 1957 lqs->lqs_queue->q_stream->sd_vnode->v_rdev; 1958 1959 if (ddi_dev_pathname(devt, S_IFCHR, path) == 1960 DDI_SUCCESS) { 1961 cmn_err(CE_WARN, "conskbd: keyboard is" 1962 " not available: %s", path); 1963 } 1964 } 1965 1966 mp->b_next = NULL; 1967 mp->b_prev = NULL; 1968 freemsg(mp); 1969 mp = msg->kpm_resp_list; 1970 } 1971 break; 1972 1973 case KIOCCMD: 1974 case KIOCMKTONE: 1975 for (mp = msg->kpm_resp_list; mp; ) { 1976 msg->kpm_resp_list = mp->b_next; 1977 1978 if (mp->b_datap->db_type == M_IOCACK) 1979 error = 0; 1980 mp->b_next = NULL; 1981 mp->b_prev = NULL; 1982 freemsg(mp); 1983 mp = msg->kpm_resp_list; 1984 } 1985 break; 1986 1987 default: /* it is impossible to reach here */ 1988 cmn_err(CE_WARN, "conskbd: unexpected ioctl reply"); 1989 } 1990 1991 mp = msg->kpm_req_msg; 1992 if (error == 0) { 1993 mp->b_datap->db_type = M_IOCACK; 1994 } else { 1995 mp->b_datap->db_type = M_IOCNAK; 1996 } 1997 iocp = (struct iocblk *)mp->b_rptr; 1998 iocp->ioc_error = error; 1999 qreply(msg->kpm_upper_queue, mp); 2000 mutex_destroy(&msg->kpm_lock); 2001 kmem_free(msg, sizeof (*msg)); 2002 2003 } /* conskbd_mux_upstream_msg() */ 2004 2005 static void 2006 conskbd_link_lowque_legacy(queue_t *lowque, mblk_t *mp) 2007 { 2008 conskbd_lower_queue_t *lqs; 2009 2010 freemsg(mp); 2011 2012 /* 2013 * Bypass the virutal keyboard for old hardware, 2014 * Now, only current legacy keyboard can be linked 2015 * under conskbd 2016 */ 2017 conskbd.conskbd_bypassed = B_TRUE; 2018 2019 /* 2020 * Link the lower queue under conskbd 2021 */ 2022 lqs = (conskbd_lower_queue_t *)lowque->q_ptr; 2023 lqs->lqs_state = LQS_INITIALIZED_LEGACY; 2024 lqs->lqs_next = conskbd.conskbd_lqueue_list; 2025 conskbd.conskbd_lqueue_list = lqs; 2026 conskbd.conskbd_lqueue_nums++; 2027 2028 mioc2ack(lqs->lqs_pending_plink, NULL, 0, 0); 2029 qreply(lqs->lqs_pending_queue, lqs->lqs_pending_plink); 2030 2031 } /* conskbd_link_lowque_legacy() */ 2032 2033 static void 2034 conskbd_link_lowque_virt(queue_t *lowque, mblk_t *mp) 2035 { 2036 int index; 2037 conskbd_lower_queue_t *lqs; 2038 2039 freemsg(mp); 2040 2041 lqs = (conskbd_lower_queue_t *)lowque->q_ptr; 2042 2043 ASSERT(lqs->lqs_queue == lowque); 2044 ASSERT(lqs->lqs_pending_plink != NULL); 2045 2046 /* 2047 * Now, link the lower queue under conskbd 2048 */ 2049 for (index = 0; index < KBTRANS_KEYNUMS_MAX; index ++) { 2050 lqs->lqs_key_state[index] = KEY_RELEASED; 2051 } 2052 lqs->lqs_next = conskbd.conskbd_lqueue_list; 2053 lqs->lqs_state = LQS_INITIALIZED; 2054 conskbd.conskbd_lqueue_nums++; 2055 conskbd.conskbd_lqueue_list = lqs; 2056 mioc2ack(lqs->lqs_pending_plink, NULL, 0, 0); 2057 qreply(lqs->lqs_pending_queue, lqs->lqs_pending_plink); 2058 2059 } /* conskbd_link_lowque_virt() */ 2060 2061 /*ARGSUSED*/ 2062 static void 2063 conskbd_legacy_upstream_msg(conskbd_lower_queue_t *lqs, mblk_t *mp) 2064 { 2065 struct iocblk *iocp; 2066 2067 ASSERT(lqs && lqs->lqs_state == LQS_INITIALIZED_LEGACY); 2068 2069 /* 2070 * We assume that all of the ioctls are headed to the 2071 * conskbd_regqueue if it is open. We are intercepting a few ioctls 2072 * that we know belong to conskbd_consqueue, and sending them there. 2073 * Any other, new ioctls that have to be routed to conskbd_consqueue 2074 * should be added to this list. 2075 */ 2076 iocp = (struct iocblk *)mp->b_rptr; 2077 2078 if ((iocp->ioc_cmd == CONSOPENPOLLEDIO) || 2079 (iocp->ioc_cmd == CONSCLOSEPOLLEDIO)) { 2080 2081 DPRINTF(PRINT_L1, PRINT_MASK_ALL, 2082 ("conskbd_legacy_upstream_msg: " 2083 "CONSOPEN/CLOSEPOLLEDIO ACK/NAK\n")); 2084 putnext(conskbd_consqueue, mp); 2085 2086 } else if (conskbd_regqueue != NULL) { 2087 DPRINTF(PRINT_L1, PRINT_MASK_ALL, 2088 ("conskbd_legacy_upstream_msg: conskbd_regqueue != NULL")); 2089 2090 putnext(conskbd_regqueue, mp); 2091 2092 } else if (conskbd_consqueue != NULL) { 2093 DPRINTF(PRINT_L1, PRINT_MASK_ALL, 2094 ("conskbd_legacy_upstream_msg: conskbd_consqueue != NULL")); 2095 putnext(conskbd_consqueue, mp); 2096 } else { 2097 /* if reached here, it must be a error */ 2098 cmn_err(CE_WARN, 2099 "kb: no destination for IOCACK/IOCNAK!"); 2100 freemsg(mp); 2101 } 2102 2103 } /* conskbd_legacy_upstream_msg() */ 2104 2105 /* 2106 * This routine is a callback routine for kbtrans module to set LED. 2107 * Kbtrans will invoke it in two cases: 2108 * 2109 * 1) application initiated request 2110 * A KIOCSLED ioctl is sent by an application. The ioctl will be 2111 * be prcoessed by queue service procedure conskbduwsrv(), which 2112 * in turn calls kbtrans to process the ioctl. Then kbtrans invokes 2113 * conskbd_streams_setled() to set LED, after that, kbtrans will 2114 * return an ACK message to upper module. 2115 * 2116 * 2) Kbtrans initiated the request 2117 * When conskbd works in TR_ASCII translation mode, if anyone of 2118 * CapsLock, NumberLock and Compose keys is pressed, kbtrans need 2119 * to set LED. In this case, there is no ioctl from upper module. 2120 * There is no requirement to send response to somebody. 2121 * 2122 * In first case, kbtrans will send response to upper module; and in the 2123 * second, we don't need to send response. So conskbd_streams_setled() 2124 * has no return value. 2125 */ 2126 static void 2127 conskbd_streams_setled(struct kbtrans_hardware *hw, int led_state) 2128 { 2129 conskbd_state_t *conskbdp = (conskbd_state_t *)hw; 2130 conskbd_lower_queue_t *lqs; 2131 mblk_t *req; 2132 2133 ASSERT(&conskbd == conskbdp); 2134 2135 if (led_state == -1) 2136 return; 2137 2138 conskbdp->conskbd_led_state = led_state; 2139 2140 /* 2141 * Basically, failing to set LED is not a fatal error, we just skip 2142 * it if this happens. 2143 */ 2144 for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { 2145 req = mkiocb(KIOCSLED); 2146 2147 if (!req) { 2148 continue; 2149 } 2150 2151 req->b_cont = allocb(sizeof (uchar_t), BPRI_MED); 2152 if (!req->b_cont) { 2153 freemsg(req); 2154 continue; 2155 } 2156 *(uchar_t *)req->b_cont->b_wptr = led_state; 2157 req->b_cont->b_wptr += sizeof (uchar_t); 2158 if (putq(lqs->lqs_queue, req) != 1) 2159 freemsg(req); 2160 } 2161 2162 } /* conskbd_streams_setled() */ 2163 2164 static void 2165 conskbd_polledio_setled(struct kbtrans_hardware *hw, int led_state) 2166 { 2167 conskbd_state_t *conskbdp = (conskbd_state_t *)hw; 2168 struct cons_polledio *cb; 2169 conskbd_lower_queue_t *lqs; 2170 2171 for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { 2172 cb = lqs->lqs_polledio; 2173 if ((cb != NULL) && (cb->cons_polledio_setled != NULL)) { 2174 cb->cons_polledio_setled(cb->cons_polledio_argument, 2175 led_state); 2176 } 2177 } 2178 2179 } /* conskbd_polledio_setled() */ 2180 2181 static boolean_t 2182 conskbd_polled_keycheck(struct kbtrans_hardware *hw, 2183 kbtrans_key_t *keycode, enum keystate *state) 2184 { 2185 conskbd_state_t *conskbdp = (conskbd_state_t *)hw; 2186 struct cons_polledio *cb; 2187 conskbd_lower_queue_t *lqs; 2188 boolean_t ret = B_FALSE; 2189 2190 for (ret = B_FALSE, lqs = conskbdp->conskbd_lqueue_list; lqs != NULL; 2191 lqs = lqs->lqs_next) { 2192 cb = lqs->lqs_polledio; 2193 if ((cb != NULL) && 2194 (cb->cons_polledio_keycheck != NULL)) { 2195 ret = cb->cons_polledio_keycheck( 2196 cb->cons_polledio_argument, keycode, state); 2197 } 2198 2199 /* Get a char from lower queue(hardware) ? */ 2200 if (ret == B_TRUE) { 2201 2202 /* A legacy keyboard ? */ 2203 if (conskbd.conskbd_bypassed == B_TRUE) 2204 break; 2205 2206 /* 2207 * This is the PS2 scancode 0x2B -> USB(49) / 2208 * USB(50) keycode mapping workaround, for 2209 * polled mode. 2210 * 2211 * There are two possible USB keycode mappings 2212 * for PS2 scancode 0x2B and this workaround 2213 * makes sure that we use the USB keycode that 2214 * does not end up being mapped to a HOLE key 2215 * using the current keyboard translation 2216 * tables. 2217 * 2218 * See conskbdlrput() for a detailed 2219 * explanation of the problem. 2220 */ 2221 if (*keycode == 49 || *keycode == 50) { 2222 if (conskbd_keyindex->k_normal[50] == HOLE) 2223 *keycode = 49; 2224 else 2225 *keycode = 50; 2226 } 2227 2228 break; 2229 } 2230 } 2231 2232 return (ret); 2233 2234 } /* conskbd_polled_keycheck() */ 2235 2236 static boolean_t 2237 conskbd_override_kbtrans(queue_t *q, mblk_t *mp) 2238 { 2239 struct iocblk *iocp; 2240 int directio; 2241 int error; 2242 2243 if (mp->b_datap->db_type != M_IOCTL) 2244 return (B_FALSE); 2245 2246 iocp = (struct iocblk *)mp->b_rptr; 2247 2248 switch (iocp->ioc_cmd) { 2249 case KIOCGDIRECT: { 2250 /* 2251 * Don't let the kbtrans-based code see this; it will 2252 * respond incorrectly. 2253 */ 2254 register mblk_t *datap; 2255 2256 if ((datap = allocb((int)sizeof (int), BPRI_MED)) == NULL) { 2257 miocnak(q, mp, 0, ENOMEM); 2258 return (B_TRUE); 2259 } 2260 2261 *(int *)datap->b_wptr = conskbd.conskbd_directio; 2262 datap->b_wptr += sizeof (int); 2263 if (mp->b_cont) { 2264 freemsg(mp->b_cont); 2265 mp->b_cont = NULL; 2266 } 2267 mp->b_cont = datap; 2268 miocack(q, mp, sizeof (int), 0); 2269 return (B_TRUE); 2270 } 2271 2272 case KIOCSDIRECT: 2273 /* 2274 * Peek at this, set our variables, and then let the kbtrans 2275 * based code see it and respond to it. 2276 */ 2277 error = miocpullup(mp, sizeof (int)); 2278 if (error != 0) { 2279 return (B_FALSE); 2280 } 2281 2282 directio = *(int *)mp->b_cont->b_rptr; 2283 if (directio != 0 && directio != 1) { 2284 miocnak(q, mp, 0, EINVAL); 2285 return (B_TRUE); 2286 } 2287 conskbd.conskbd_directio = directio; 2288 2289 if (conskbd.conskbd_directio) { 2290 kbtrans_streams_set_queue( 2291 conskbd.conskbd_kbtrans, conskbd_regqueue); 2292 } else { 2293 kbtrans_streams_set_queue( 2294 conskbd.conskbd_kbtrans, conskbd_consqueue); 2295 } 2296 2297 /* 2298 * Let the kbtrans-based code see this and respond to it. 2299 */ 2300 return (B_FALSE); 2301 2302 default: 2303 return (B_FALSE); 2304 } 2305 2306 } /* conskbd_override_kbtrans() */ 2307 2308 2309 static void 2310 conskbd_polledio_enter(cons_polledio_arg_t arg) 2311 { 2312 conskbd_state_t *conskbdp; 2313 struct cons_polledio *cb; 2314 conskbd_lower_queue_t *lqs; 2315 2316 conskbdp = (conskbd_state_t *)arg; 2317 for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { 2318 cb = lqs->lqs_polledio; 2319 if ((cb != NULL) && (cb->cons_polledio_enter != NULL)) { 2320 cb->cons_polledio_enter(cb->cons_polledio_argument); 2321 } 2322 } 2323 2324 } /* conskbd_polledio_enter() */ 2325 2326 static void 2327 conskbd_polledio_exit(cons_polledio_arg_t arg) 2328 { 2329 conskbd_state_t *conskbdp; 2330 struct cons_polledio *cb; 2331 conskbd_lower_queue_t *lqs; 2332 2333 conskbdp = (conskbd_state_t *)arg; 2334 for (lqs = conskbdp->conskbd_lqueue_list; lqs; lqs = lqs->lqs_next) { 2335 cb = lqs->lqs_polledio; 2336 if ((cb != NULL) && (cb->cons_polledio_exit != NULL)) { 2337 cb->cons_polledio_exit(cb->cons_polledio_argument); 2338 } 2339 } 2340 2341 } /* conskbd_polledio_exit() */ 2342 2343 static int 2344 conskbd_polledio_getchar(cons_polledio_arg_t arg) 2345 { 2346 conskbd_state_t *conskbdp; 2347 2348 conskbdp = (conskbd_state_t *)arg; 2349 2350 return (kbtrans_getchar(conskbdp->conskbd_kbtrans)); 2351 2352 } /* conskbd_polledio_getchar() */ 2353 2354 static int 2355 conskbd_polledio_ischar(cons_polledio_arg_t arg) 2356 { 2357 conskbd_state_t *conskbdp; 2358 2359 conskbdp = (conskbd_state_t *)arg; 2360 2361 return (kbtrans_ischar(conskbdp->conskbd_kbtrans)); 2362 2363 } /* conskbd_polledio_ischar() */ 2364 2365 2366 static void 2367 conskbd_mux_enqueue_msg(conskbd_pending_msg_t *msg) 2368 { 2369 mutex_enter(&conskbd_msgq_lock); 2370 msg->kpm_next = conskbd_msg_queue; 2371 conskbd_msg_queue = msg; 2372 mutex_exit(&conskbd_msgq_lock); 2373 2374 } /* conskbd_mux_enqueue_msg() */ 2375 2376 /* 2377 * the messages in conskbd_msg_queue we just enqueue 2378 */ 2379 static conskbd_pending_msg_t * 2380 conskbd_mux_find_msg(mblk_t *mp) 2381 { 2382 conskbd_pending_msg_t *msg; 2383 struct iocblk *iocp; 2384 uint_t id; 2385 2386 mutex_enter(&conskbd_msgq_lock); 2387 msg = conskbd_msg_queue; 2388 2389 iocp = (struct iocblk *)mp->b_rptr; 2390 ASSERT(iocp); 2391 id = iocp->ioc_id; 2392 while (msg && msg->kpm_req_id != id) { 2393 msg = msg->kpm_next; 2394 } 2395 mutex_exit(&conskbd_msgq_lock); 2396 2397 return (msg); 2398 2399 } /* conskbd_mux_find_msg() */ 2400 2401 2402 static void 2403 conskbd_mux_dequeue_msg(conskbd_pending_msg_t *msg) 2404 { 2405 conskbd_pending_msg_t *prev; 2406 conskbd_pending_msg_t *p; 2407 2408 mutex_enter(&conskbd_msgq_lock); 2409 prev = conskbd_msg_queue; 2410 2411 for (p = prev; p && p != msg; p = p->kpm_next) 2412 prev = p; 2413 2414 ASSERT(p && p == msg); 2415 2416 if (prev == p) { 2417 conskbd_msg_queue = msg->kpm_next; 2418 } else { 2419 prev->kpm_next = p->kpm_next; 2420 } 2421 p->kpm_next = NULL; 2422 mutex_exit(&conskbd_msgq_lock); 2423 2424 } /* conskbd_mux_dequeue_msg() */ 2425 2426 #ifdef DEBUG 2427 /*ARGSUSED*/ 2428 void 2429 conskbd_dprintf(const char *fmt, ...) 2430 { 2431 char buf[256]; 2432 va_list ap; 2433 2434 va_start(ap, fmt); 2435 (void) vsprintf(buf, fmt, ap); 2436 va_end(ap); 2437 2438 cmn_err(CE_CONT, "conskbd: %s", buf); 2439 2440 } /* conskbd_dprintf() */ 2441 #endif 2442