xref: /titanic_44/usr/src/uts/common/io/bge/bge_hw.h (revision 3c112a2b34403220c06c3e2fcac403358cfba168)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #ifndef _BGE_HW_H
28 #define	_BGE_HW_H
29 
30 #ifdef __cplusplus
31 extern "C" {
32 #endif
33 
34 #include <sys/types.h>
35 
36 
37 /*
38  * First section:
39  *	Identification of the various Broadcom chips
40  *
41  * Note: the various ID values are *not* all unique ;-(
42  *
43  * Note: the presence of an ID here does *not* imply that the chip is
44  * supported.  At this time, only the 5703C, 5704C, and 5704S devices
45  * used on the motherboards of certain Sun products are supported.
46  *
47  * Note: the revision-id values in the PCI revision ID register are
48  * *NOT* guaranteed correct.  Use the chip ID from the MHCR instead.
49  */
50 
51 #define	VENDOR_ID_BROADCOM		0x14e4
52 #define	VENDOR_ID_SUN			0x108e
53 
54 #define	DEVICE_ID_5700			0x1644
55 #define	DEVICE_ID_5700x			0x0003
56 #define	DEVICE_ID_5701			0x1645
57 #define	DEVICE_ID_5702			0x16a6
58 #define	DEVICE_ID_5702fe		0x164d
59 #define	DEVICE_ID_5703C			0x16a7
60 #define	DEVICE_ID_5703S			0x1647
61 #define	DEVICE_ID_5703			0x16c7
62 #define	DEVICE_ID_5704C			0x1648
63 #define	DEVICE_ID_5704S			0x16a8
64 #define	DEVICE_ID_5704			0x1649
65 #define	DEVICE_ID_5705C			0x1653
66 #define	DEVICE_ID_5705_2		0x1654
67 #define	DEVICE_ID_5718			0x1656
68 #define	DEVICE_ID_5705M			0x165d
69 #define	DEVICE_ID_5705MA3		0x165e
70 #define	DEVICE_ID_5705F			0x166e
71 #define	DEVICE_ID_5780			0x166a
72 #define	DEVICE_ID_5782			0x1696
73 #define	DEVICE_ID_5785			0x1699
74 #define	DEVICE_ID_5787			0x169b
75 #define	DEVICE_ID_5787M			0x1693
76 #define	DEVICE_ID_5788			0x169c
77 #define	DEVICE_ID_5789			0x169d
78 #define	DEVICE_ID_5751			0x1677
79 #define	DEVICE_ID_5751M			0x167d
80 #define	DEVICE_ID_5752			0x1600
81 #define	DEVICE_ID_5752M			0x1601
82 #define	DEVICE_ID_5753			0x16fd
83 #define	DEVICE_ID_5754			0x167a
84 #define	DEVICE_ID_5755			0x167b
85 #define	DEVICE_ID_5755M			0x1673
86 #define	DEVICE_ID_5756M			0x1674
87 #define	DEVICE_ID_5721			0x1659
88 #define	DEVICE_ID_5722			0x165a
89 #define	DEVICE_ID_5723			0x165b
90 #define	DEVICE_ID_5714C			0x1668
91 #define	DEVICE_ID_5714S			0x1669
92 #define	DEVICE_ID_5715C			0x1678
93 #define	DEVICE_ID_5715S			0x1679
94 #define	DEVICE_ID_5761E			0x1680
95 #define	DEVICE_ID_5761			0x1681
96 #define	DEVICE_ID_5764			0x1684
97 #define	DEVICE_ID_5906			0x1712
98 #define	DEVICE_ID_5906M			0x1713
99 
100 #define	REVISION_ID_5700_B0		0x10
101 #define	REVISION_ID_5700_B2		0x12
102 #define	REVISION_ID_5700_B3		0x13
103 #define	REVISION_ID_5700_C0		0x20
104 #define	REVISION_ID_5700_C1		0x21
105 #define	REVISION_ID_5700_C2		0x22
106 
107 #define	REVISION_ID_5701_A0		0x08
108 #define	REVISION_ID_5701_A2		0x12
109 #define	REVISION_ID_5701_A3		0x15
110 
111 #define	REVISION_ID_5702_A0		0x00
112 
113 #define	REVISION_ID_5703_A0		0x00
114 #define	REVISION_ID_5703_A1		0x01
115 #define	REVISION_ID_5703_A2		0x02
116 
117 #define	REVISION_ID_5704_A0		0x00
118 #define	REVISION_ID_5704_A1		0x01
119 #define	REVISION_ID_5704_A2		0x02
120 #define	REVISION_ID_5704_A3		0x03
121 #define	REVISION_ID_5704_B0		0x10
122 
123 #define	REVISION_ID_5705_A0		0x00
124 #define	REVISION_ID_5705_A1		0x01
125 #define	REVISION_ID_5705_A2		0x02
126 #define	REVISION_ID_5705_A3		0x03
127 
128 #define	REVISION_ID_5721_A0		0x00
129 #define	REVISION_ID_5721_A1		0x01
130 
131 #define	REVISION_ID_5751_A0		0x00
132 #define	REVISION_ID_5751_A1		0x01
133 
134 #define	REVISION_ID_5714_A0		0x00
135 #define	REVISION_ID_5714_A1		0x01
136 #define	REVISION_ID_5714_A2		0xA2
137 #define	REVISION_ID_5714_A3		0xA3
138 
139 #define	REVISION_ID_5715_A0		0x00
140 #define	REVISION_ID_5715_A1		0x01
141 #define	REVISION_ID_5715_A2		0xA2
142 
143 #define	REVISION_ID_5715S_A0		0x00
144 #define	REVISION_ID_5715S_A1		0x01
145 
146 #define	REVISION_ID_5754_A0		0x00
147 #define	REVISION_ID_5754_A1		0x01
148 
149 #define	DEVICE_5704_SERIES_CHIPSETS(bgep)\
150 		((bgep->chipid.device == DEVICE_ID_5700) ||\
151 		(bgep->chipid.device == DEVICE_ID_5701) ||\
152 		(bgep->chipid.device == DEVICE_ID_5702) ||\
153 		(bgep->chipid.device == DEVICE_ID_5702fe)||\
154 		(bgep->chipid.device == DEVICE_ID_5703C) ||\
155 		(bgep->chipid.device == DEVICE_ID_5703S) ||\
156 		(bgep->chipid.device == DEVICE_ID_5703) ||\
157 		(bgep->chipid.device == DEVICE_ID_5704C) ||\
158 		(bgep->chipid.device == DEVICE_ID_5704S) ||\
159 		(bgep->chipid.device == DEVICE_ID_5704))
160 
161 #define	DEVICE_5702_SERIES_CHIPSETS(bgep) \
162 		((bgep->chipid.device == DEVICE_ID_5702) ||\
163 		(bgep->chipid.device == DEVICE_ID_5702fe))
164 
165 #define	DEVICE_5705_SERIES_CHIPSETS(bgep) \
166 		((bgep->chipid.device == DEVICE_ID_5705C) ||\
167 		(bgep->chipid.device == DEVICE_ID_5705M) ||\
168 		(bgep->chipid.device == DEVICE_ID_5705MA3) ||\
169 		(bgep->chipid.device == DEVICE_ID_5705F) ||\
170 		(bgep->chipid.device == DEVICE_ID_5780) ||\
171 		(bgep->chipid.device == DEVICE_ID_5782) ||\
172 		(bgep->chipid.device == DEVICE_ID_5788) ||\
173 		(bgep->chipid.device == DEVICE_ID_5705_2) ||\
174 		(bgep->chipid.device == DEVICE_ID_5754) ||\
175 		(bgep->chipid.device == DEVICE_ID_5755) ||\
176 		(bgep->chipid.device == DEVICE_ID_5756M) ||\
177 		(bgep->chipid.device == DEVICE_ID_5753))
178 
179 #define	DEVICE_5721_SERIES_CHIPSETS(bgep) \
180 		((bgep->chipid.device == DEVICE_ID_5721) ||\
181 		(bgep->chipid.device == DEVICE_ID_5751) ||\
182 		(bgep->chipid.device == DEVICE_ID_5751M) ||\
183 		(bgep->chipid.device == DEVICE_ID_5752) ||\
184 		(bgep->chipid.device == DEVICE_ID_5752M) ||\
185 		(bgep->chipid.device == DEVICE_ID_5789))
186 
187 #define	DEVICE_5717_SERIES_CHIPSETS(bgep) \
188 		(bgep->chipid.device == DEVICE_ID_5718)
189 
190 #define	DEVICE_5723_SERIES_CHIPSETS(bgep) \
191 		((bgep->chipid.device == DEVICE_ID_5723) ||\
192 		(bgep->chipid.device == DEVICE_ID_5761) ||\
193 		(bgep->chipid.device == DEVICE_ID_5761E) ||\
194 		(bgep->chipid.device == DEVICE_ID_5764) ||\
195 		(bgep->chipid.device == DEVICE_ID_5785))
196 
197 #define	DEVICE_5714_SERIES_CHIPSETS(bgep) \
198 		((bgep->chipid.device == DEVICE_ID_5714C) ||\
199 		(bgep->chipid.device == DEVICE_ID_5714S) ||\
200 		(bgep->chipid.device == DEVICE_ID_5715C) ||\
201 		(bgep->chipid.device == DEVICE_ID_5715S))
202 
203 #define	DEVICE_5906_SERIES_CHIPSETS(bgep) \
204 		((bgep->chipid.device == DEVICE_ID_5906) ||\
205 		(bgep->chipid.device == DEVICE_ID_5906M))
206 
207 /*
208  * Second section:
209  *	Offsets of important registers & definitions for bits therein
210  */
211 
212 /*
213  * PCI-X registers & bits
214  */
215 #define	PCIX_CONF_COMM			0x42
216 #define	PCIX_COMM_RELAXED		0x0002
217 
218 /*
219  * Miscellaneous Host Control Register, in PCI config space
220  */
221 #define	PCI_CONF_BGE_MHCR		0x68
222 #define	MHCR_CHIP_REV_MASK		0xffff0000
223 #define	MHCR_ENABLE_TAGGED_STATUS_MODE	0x00000200
224 #define	MHCR_MASK_INTERRUPT_MODE	0x00000100
225 #define	MHCR_ENABLE_INDIRECT_ACCESS	0x00000080
226 #define	MHCR_ENABLE_REGISTER_WORD_SWAP	0x00000040
227 #define	MHCR_ENABLE_CLOCK_CONTROL_WRITE	0x00000020
228 #define	MHCR_ENABLE_PCI_STATE_WRITE	0x00000010
229 #define	MHCR_ENABLE_ENDIAN_WORD_SWAP	0x00000008
230 #define	MHCR_ENABLE_ENDIAN_BYTE_SWAP	0x00000004
231 #define	MHCR_MASK_PCI_INT_OUTPUT	0x00000002
232 #define	MHCR_CLEAR_INTERRUPT_INTA	0x00000001
233 
234 #define	MHCR_CHIP_REV_5700_B0		0x71000000
235 #define	MHCR_CHIP_REV_5700_B2		0x71020000
236 #define	MHCR_CHIP_REV_5700_B3		0x71030000
237 #define	MHCR_CHIP_REV_5700_C0		0x72000000
238 #define	MHCR_CHIP_REV_5700_C1		0x72010000
239 #define	MHCR_CHIP_REV_5700_C2		0x72020000
240 
241 #define	MHCR_CHIP_REV_5701_A0		0x00000000
242 #define	MHCR_CHIP_REV_5701_A2		0x00020000
243 #define	MHCR_CHIP_REV_5701_A3		0x00030000
244 #define	MHCR_CHIP_REV_5701_A5		0x01050000
245 
246 #define	MHCR_CHIP_REV_5702_A0		0x10000000
247 #define	MHCR_CHIP_REV_5702_A1		0x10010000
248 #define	MHCR_CHIP_REV_5702_A2		0x10020000
249 
250 #define	MHCR_CHIP_REV_5703_A0		0x10000000
251 #define	MHCR_CHIP_REV_5703_A1		0x10010000
252 #define	MHCR_CHIP_REV_5703_A2		0x10020000
253 #define	MHCR_CHIP_REV_5703_B0		0x11000000
254 #define	MHCR_CHIP_REV_5703_B1		0x11010000
255 
256 #define	MHCR_CHIP_REV_5704_A0		0x20000000
257 #define	MHCR_CHIP_REV_5704_A1		0x20010000
258 #define	MHCR_CHIP_REV_5704_A2		0x20020000
259 #define	MHCR_CHIP_REV_5704_A3		0x20030000
260 #define	MHCR_CHIP_REV_5704_B0		0x21000000
261 
262 #define	MHCR_CHIP_REV_5705_A0		0x30000000
263 #define	MHCR_CHIP_REV_5705_A1		0x30010000
264 #define	MHCR_CHIP_REV_5705_A2		0x30020000
265 #define	MHCR_CHIP_REV_5705_A3		0x30030000
266 #define	MHCR_CHIP_REV_5705_A5		0x30050000
267 
268 #define	MHCR_CHIP_REV_5782_A0		0x30030000
269 #define	MHCR_CHIP_REV_5782_A1		0x30030088
270 
271 #define	MHCR_CHIP_REV_5788_A1		0x30050000
272 
273 #define	MHCR_CHIP_REV_5751_A0		0x40000000
274 #define	MHCR_CHIP_REV_5751_A1		0x40010000
275 
276 #define	MHCR_CHIP_REV_5721_A0		0x41000000
277 #define	MHCR_CHIP_REV_5721_A1		0x41010000
278 
279 #define	MHCR_CHIP_REV_5714_A0		0x50000000
280 #define	MHCR_CHIP_REV_5714_A1		0x90010000
281 
282 #define	MHCR_CHIP_REV_5715_A0		0x50000000
283 #define	MHCR_CHIP_REV_5715_A1		0x90010000
284 
285 #define	MHCR_CHIP_REV_5715S_A0		0x50000000
286 #define	MHCR_CHIP_REV_5715S_A1		0x90010000
287 
288 #define	MHCR_CHIP_REV_5754_A0		0xb0000000
289 #define	MHCR_CHIP_REV_5754_A1		0xb0010000
290 
291 #define	MHCR_CHIP_REV_5787_A0		0xb0000000
292 #define	MHCR_CHIP_REV_5787_A1		0xb0010000
293 #define	MHCR_CHIP_REV_5787_A2		0xb0020000
294 
295 #define	MHCR_CHIP_REV_5755_A0		0xa0000000
296 #define	MHCR_CHIP_REV_5755_A1		0xa0010000
297 
298 #define	MHCR_CHIP_REV_5906_A0		0xc0000000
299 #define	MHCR_CHIP_REV_5906_A1		0xc0010000
300 #define	MHCR_CHIP_REV_5906_A2		0xc0020000
301 
302 #define	MHCR_CHIP_REV_5723_A0		0xf0000000
303 #define	MHCR_CHIP_REV_5723_A1		0xf0010000
304 #define	MHCR_CHIP_REV_5723_A2		0xf0020000
305 #define	MHCR_CHIP_REV_5723_B0		0xf1000000
306 
307 #define	MHCR_CHIP_ASIC_REV(ChipRevId)	((ChipRevId) & 0xf0000000)
308 #define	MHCR_CHIP_ASIC_REV_5700		(0x7 << 28)
309 #define	MHCR_CHIP_ASIC_REV_5701		(0x0 << 28)
310 #define	MHCR_CHIP_ASIC_REV_5703		(0x1 << 28)
311 #define	MHCR_CHIP_ASIC_REV_5704		(0x2 << 28)
312 #define	MHCR_CHIP_ASIC_REV_5705		(0x3 << 28)
313 #define	MHCR_CHIP_ASIC_REV_5721_5751	(0x4 << 28)
314 #define	MHCR_CHIP_ASIC_REV_5714 	(0x5 << 28)
315 #define	MHCR_CHIP_ASIC_REV_5752		(0x6 << 28)
316 #define	MHCR_CHIP_ASIC_REV_5754		(0xb << 28)
317 #define	MHCR_CHIP_ASIC_REV_5787		((uint32_t)0xb << 28)
318 #define	MHCR_CHIP_ASIC_REV_5755		((uint32_t)0xa << 28)
319 #define	MHCR_CHIP_ASIC_REV_5715 	((uint32_t)0x9 << 28)
320 #define	MHCR_CHIP_ASIC_REV_5906		((uint32_t)0xc << 28)
321 #define	MHCR_CHIP_ASIC_REV_5723		((uint32_t)0xf << 28)
322 
323 
324 /*
325  * PCI DMA read/write Control Register, in PCI config space
326  *
327  * Note that several fields previously defined here have been deleted
328  * as they are not implemented in the 5703/4.
329  *
330  * Note: the value of this register is critical.  It is possible to
331  * cause various unpleasant effects (DTOs, transaction deadlock, etc)
332  * by programming the wrong value.  The value #defined below has been
333  * tested and shown to avoid all known problems.  If it is to be changed,
334  * correct operation must be reverified on all supported platforms.
335  *
336  * In particular, we set both watermark fields to 2xCacheLineSize (128)
337  * bytes and DMA_MIN_BEATS to 0 in order to avoid unfortunate interactions
338  * with Tomatillo's internal pipelines, that otherwise result in stalls,
339  * repeated retries, and DTOs.
340  */
341 #define	PCI_CONF_BGE_PDRWCR		0x6c
342 #define	PDRWCR_RWCMD_MASK		0xFF000000
343 #define	PDRWCR_PCIX32_BUGFIX_MASK	0x00800000
344 #define	PDRWCR_WRITE_WATERMARK_MASK	0x00380000
345 #define	PDRWCR_READ_WATERMARK_MASK	0x00070000
346 #define	PDRWCR_CONCURRENCY_MASK		0x0000c000
347 #define	PDRWCR_5704_FLOP_ON_RETRY	0x00008000
348 #define	PDRWCR_ONE_DMA_AT_ONCE		0x00004000
349 #define	PDRWCR_MIN_BEAT_MASK		0x000000ff
350 
351 /*
352  * These are the actual values to be put into the fields shown above
353  */
354 #define	PDRWCR_RWCMDS			0x76000000	/* MW and MR	*/
355 #define	PDRWCR_DMA_WRITE_WATERMARK	0x00180000	/* 011 => 128	*/
356 #define	PDRWCR_DMA_READ_WATERMARK	0x00030000	/* 011 => 128	*/
357 #define	PDRWCR_MIN_BEATS		0x00000000
358 
359 #define	PDRWCR_VAR_DEFAULT		0x761b0000
360 #define	PDRWCR_VAR_5721			0x76180000
361 #define	PDRWCR_VAR_5714			0x76148000	/* OR of above	*/
362 #define	PDRWCR_VAR_5715			0x76144000	/* OR of above	*/
363 #define	PDRWCR_VAR_5717			0x00380000
364 
365 /*
366  * PCI State Register, in PCI config space
367  *
368  * Note: this register is read-only unless the ENABLE_PCI_STATE_WRITE bit
369  * is set in the MHCR, EXCEPT for the RETRY_SAME_DMA bit which is always RW
370  */
371 #define	PCI_CONF_BGE_PCISTATE		0x70
372 #define	PCISTATE_RETRY_SAME_DMA		0x00002000
373 #define	PCISTATE_FLAT_VIEW		0x00000100
374 #define	PCISTATE_EXT_ROM_RETRY		0x00000040
375 #define	PCISTATE_EXT_ROM_ENABLE		0x00000020
376 #define	PCISTATE_BUS_IS_32_BIT		0x00000010
377 #define	PCISTATE_BUS_IS_FAST		0x00000008
378 #define	PCISTATE_BUS_IS_PCI		0x00000004
379 #define	PCISTATE_INTA_STATE		0x00000002
380 #define	PCISTATE_FORCE_RESET		0x00000001
381 
382 /*
383  * PCI Clock Control Register, in PCI config space
384  */
385 #define	PCI_CONF_BGE_CLKCTL		0x74
386 #define	CLKCTL_PCIE_PLP_DISABLE		0x80000000
387 #define	CLKCTL_PCIE_DLP_DISABLE		0x40000000
388 #define	CLKCTL_PCIE_TLP_DISABLE		0x20000000
389 #define	CLKCTL_PCI_READ_TOO_LONG_FIX	0x04000000
390 #define	CLKCTL_PCI_WRITE_TOO_LONG_FIX	0x02000000
391 #define	CLKCTL_PCIE_A0_FIX		0x00101000
392 
393 /*
394  * Dual MAC Control Register, in PCI config space
395  */
396 #define	PCI_CONF_BGE_DUAL_MAC_CONTROL	0xB8
397 #define	DUALMAC_CHANNEL_CONTROL_MASK	0x00000003	/* RW	*/
398 #define	DUALMAC_CHANNEL_ID_MASK		0x00000004	/* RO	*/
399 
400 /*
401  * Register Indirect Access Address Register, 0x78 in PCI config
402  * space.  Once this is set, accesses to the Register Indirect
403  * Access Data Register (0x80) refer to the register whose address
404  * is given by *this* register.  This allows access to all the
405  * operating registers, while using only config space accesses.
406  *
407  * Note that the address written to the RIIAR should lie in one
408  * of the following ranges:
409  *	0x00000000 <= address < 0x00008000 (regular registers)
410  *	0x00030000 <= address < 0x00034000 (RxRISC scratchpad)
411  *	0x00034000 <= address < 0x00038000 (TxRISC scratchpad)
412  *	0x00038000 <= address < 0x00038800 (RxRISC ROM)
413  */
414 #define	PCI_CONF_BGE_RIAAR		0x78
415 #define	PCI_CONF_BGE_RIADR		0x80
416 
417 #define	RIAAR_REGISTER_MIN		0x00000000
418 #define	RIAAR_REGISTER_MAX		0x00008000
419 #define	RIAAR_RX_SCRATCH_MIN		0x00030000
420 #define	RIAAR_RX_SCRATCH_MAX		0x00034000
421 #define	RIAAR_TX_SCRATCH_MIN		0x00034000
422 #define	RIAAR_TX_SCRATCH_MAX		0x00038000
423 #define	RIAAR_RXROM_MIN			0x00038000
424 #define	RIAAR_RXROM_MAX			0x00038800
425 
426 /*
427  * Memory Window Base Address Register, 0x7c in PCI config space
428  * Once this is set, accesses to the Memory Window Data Access Register
429  * (0x84) refer to the word of NIC-local memory whose address is given
430  * by this register.  When used in this way, the whole of the address
431  * written to this register is significant.
432  *
433  * This register also provides the 32K-aligned base address for a 32K
434  * region of NIC-local memory that the host can directly address in
435  * the upper 32K of the 64K of PCI memory space allocated to the chip.
436  * In this case, the bottom 15 bits of the register are ignored.
437  *
438  * Note that the address written to the MWBAR should lie in the range
439  * 0x00000000 <= address < 0x00020000.  The rest of the range up to 1M
440  * (i.e. 0x00200000 <= address < 0x01000000) would be valid if external
441  * memory were present, but it's only supported on the 5700, not the
442  * 5701/5703/5704.
443  */
444 #define	PCI_CONF_BGE_MWBAR		0x7c
445 #define	PCI_CONF_BGE_MWDAR		0x84
446 #define	MWBAR_GRANULARITY		0x00008000	/* 32k	*/
447 #define	MWBAR_GRANULE_MASK		(MWBAR_GRANULARITY-1)
448 #define	MWBAR_ONCHIP_MAX		0x00020000	/* 128k */
449 
450 /*
451  * The PCI express device control register and device status register
452  * which are only applicable on BCM5751 and BCM5721.
453  */
454 #define	PCI_CONF_DEV_CTRL		0xd8
455 #define	PCI_CONF_DEV_CTRL_5723		0xd4
456 #define	READ_REQ_SIZE_MAX		0x5000
457 #define	DEV_CTRL_NO_SNOOP		0x0800
458 #define	DEV_CTRL_RELAXED		0x0010
459 
460 #define	PCI_CONF_DEV_STUS		0xda
461 #define	PCI_CONF_DEV_STUS_5723		0xd6
462 #define	DEVICE_ERROR_STUS		0xf
463 
464 #define	NIC_MEM_WINDOW_OFFSET		0x00008000	/* 32k	*/
465 
466 /*
467  * Where to find things in NIC-local (on-chip) memory
468  */
469 #define	NIC_MEM_SEND_RINGS		0x0100
470 #define	NIC_MEM_SEND_RING(ring)		(0x0100+16*(ring))
471 #define	NIC_MEM_RECV_RINGS		0x0200
472 #define	NIC_MEM_RECV_RING(ring)		(0x0200+16*(ring))
473 #define	NIC_MEM_STATISTICS		0x0300
474 #define	NIC_MEM_STATISTICS_SIZE		0x0800
475 #define	NIC_MEM_STATUS_BLOCK		0x0b00
476 #define	NIC_MEM_STATUS_SIZE		0x0050
477 #define	NIC_MEM_GENCOMM			0x0b50
478 
479 
480 /*
481  * Note: the (non-bogus) values below are appropriate for systems
482  * without external memory.  They would be different on a 5700 with
483  * external memory.
484  *
485  * Note: The higher send ring addresses and the mini ring shadow
486  * buffer address are dummies - systems without external memory
487  * are limited to 4 send rings and no mini receive ring.
488  */
489 #define	NIC_MEM_SHADOW_DMA		0x2000
490 #define	NIC_MEM_SHADOW_SEND_1_4		0x4000
491 #define	NIC_MEM_SHADOW_SEND_5_6		0x6000		/* bogus	*/
492 #define	NIC_MEM_SHADOW_SEND_7_8		0x7000		/* bogus	*/
493 #define	NIC_MEM_SHADOW_SEND_9_16	0x8000		/* bogus	*/
494 #define	NIC_MEM_SHADOW_BUFF_STD		0x6000
495 #define	NIC_MEM_SHADOW_BUFF_STD_5717		0x40000
496 #define	NIC_MEM_SHADOW_BUFF_JUMBO	0x7000
497 #define	NIC_MEM_SHADOW_BUFF_MINI	0x8000		/* bogus	*/
498 #define	NIC_MEM_SHADOW_SEND_RING(ring, nslots)	(0x4000 + 4*(ring)*(nslots))
499 
500 /*
501  * Put this in the GENCOMM port to tell the firmware not to run PXE
502  */
503 #define	T3_MAGIC_NUMBER			0x4b657654u
504 
505 /*
506  * The remaining registers appear in the low 32K of regular
507  * PCI Memory Address Space
508  */
509 
510 /*
511  * All the state machine control registers below have at least a
512  * <RESET> bit and an <ENABLE> bit as defined below.  Some also
513  * have an <ATTN_ENABLE> bit.
514  */
515 #define	STATE_MACHINE_ATTN_ENABLE_BIT	0x00000004
516 #define	STATE_MACHINE_ENABLE_BIT	0x00000002
517 #define	STATE_MACHINE_RESET_BIT		0x00000001
518 
519 #define	TRANSMIT_MAC_MODE_REG		0x045c
520 #define	SEND_DATA_INITIATOR_MODE_REG	0x0c00
521 #define	SEND_DATA_COMPLETION_MODE_REG	0x1000
522 #define	SEND_BD_SELECTOR_MODE_REG	0x1400
523 #define	SEND_BD_INITIATOR_MODE_REG	0x1800
524 #define	SEND_BD_COMPLETION_MODE_REG	0x1c00
525 
526 #define	RECEIVE_MAC_MODE_REG		0x0468
527 #define	RCV_LIST_PLACEMENT_MODE_REG	0x2000
528 #define	RCV_DATA_BD_INITIATOR_MODE_REG	0x2400
529 #define	RCV_DATA_COMPLETION_MODE_REG	0x2800
530 #define	RCV_BD_INITIATOR_MODE_REG	0x2c00
531 #define	RCV_BD_COMPLETION_MODE_REG	0x3000
532 #define	RCV_LIST_SELECTOR_MODE_REG	0x3400
533 
534 #define	MBUF_CLUSTER_FREE_MODE_REG	0x3800
535 #define	HOST_COALESCE_MODE_REG		0x3c00
536 #define	MEMORY_ARBITER_MODE_REG		0x4000
537 #define	BUFFER_MANAGER_MODE_REG		0x4400
538 #define	READ_DMA_MODE_REG		0x4800
539 #define	WRITE_DMA_MODE_REG		0x4c00
540 #define	DMA_COMPLETION_MODE_REG		0x6400
541 
542 /*
543  * Other bits in some of the above state machine control registers
544  */
545 
546 /*
547  * Transmit MAC Mode Register
548  * (TRANSMIT_MAC_MODE_REG, 0x045c)
549  */
550 #define	TRANSMIT_MODE_LONG_PAUSE	0x00000040
551 #define	TRANSMIT_MODE_BIG_BACKOFF	0x00000020
552 #define	TRANSMIT_MODE_FLOW_CONTROL	0x00000010
553 
554 /*
555  * Receive MAC Mode Register
556  * (RECEIVE_MAC_MODE_REG, 0x0468)
557  */
558 #define	RECEIVE_MODE_KEEP_VLAN_TAG	0x00000400
559 #define	RECEIVE_MODE_NO_CRC_CHECK	0x00000200
560 #define	RECEIVE_MODE_PROMISCUOUS	0x00000100
561 #define	RECEIVE_MODE_LENGTH_CHECK	0x00000080
562 #define	RECEIVE_MODE_ACCEPT_RUNTS	0x00000040
563 #define	RECEIVE_MODE_ACCEPT_OVERSIZE	0x00000020
564 #define	RECEIVE_MODE_KEEP_PAUSE		0x00000010
565 #define	RECEIVE_MODE_FLOW_CONTROL	0x00000004
566 
567 /*
568  * Receive BD Initiator Mode Register
569  * (RCV_BD_INITIATOR_MODE_REG, 0x2c00)
570  *
571  * Each of these bits controls whether ATTN is asserted
572  * on a particular condition
573  */
574 #define	RCV_BD_DISABLED_RING_ATTN	0x00000004
575 
576 /*
577  * Receive Data & Receive BD Initiator Mode Register
578  * (RCV_DATA_BD_INITIATOR_MODE_REG, 0x2400)
579  *
580  * Each of these bits controls whether ATTN is asserted
581  * on a particular condition
582  */
583 #define	RCV_DATA_BD_ILL_RING_ATTN	0x00000010
584 #define	RCV_DATA_BD_FRAME_SIZE_ATTN	0x00000008
585 #define	RCV_DATA_BD_NEED_JUMBO_ATTN	0x00000004
586 
587 #define	RCV_DATA_BD_ALL_ATTN_BITS	0x0000001c
588 
589 /*
590  * Host Coalescing Mode Control Register
591  * (HOST_COALESCE_MODE_REG, 0x3c00)
592  */
593 #define	COALESCE_64_BYTE_RINGS		12
594 #define	COALESCE_NO_INT_ON_COAL_FORCE	0x00001000
595 #define	COALESCE_NO_INT_ON_DMAD_FORCE	0x00000800
596 #define	COALESCE_CLR_TICKS_TX		0x00000400
597 #define	COALESCE_CLR_TICKS_RX		0x00000200
598 #define	COALESCE_32_BYTE_STATUS		0x00000100
599 #define	COALESCE_64_BYTE_STATUS		0x00000080
600 #define	COALESCE_NOW			0x00000008
601 
602 /*
603  * Memory Arbiter Mode Register
604  * (MEMORY_ARBITER_MODE_REG, 0x4000)
605  */
606 #define	MEMORY_ARBITER_ENABLE		0x00000002
607 
608 /*
609  * Buffer Manager Mode Register
610  * (BUFFER_MANAGER_MODE_REG, 0x4400)
611  *
612  * In addition to the usual error-attn common to most state machines
613  * this register has a separate bit for attn on running-low-on-mbufs
614  */
615 #define	BUFF_MGR_TEST_MODE		0x00000008
616 #define	BUFF_MGR_MBUF_LOW_ATTN_ENABLE	0x00000010
617 
618 #define	BUFF_MGR_ALL_ATTN_BITS		0x00000014
619 
620 /*
621  * Read and Write DMA Mode Registers (READ_DMA_MODE_REG,
622  * 0x4800 and WRITE_DMA_MODE_REG, 0x4c00)
623  *
624  * These registers each contain a 2-bit priority field, which controls
625  * the relative priority of that type of DMA (read vs. write vs. MSI),
626  * and a set of bits that control whether ATTN is asserted on each
627  * particular condition
628  */
629 #define	DMA_PRIORITY_MASK		0xc0000000
630 #define	DMA_PRIORITY_SHIFT		30
631 #define	ALL_DMA_ATTN_BITS		0x000003fc
632 
633 /*
634  * BCM5755, 5755M, 5906, 5906M only
635  * 1 - Enable Fix. Device will send out the status block before
636  *     the interrupt message
637  * 0 - Disable fix. Device will send out the interrupt message
638  *     before the status block
639  */
640 #define	DMA_STATUS_TAG_FIX_CQ12384	0x20000000
641 
642 /*
643  * End of state machine control register definitions
644  */
645 
646 
647 /*
648  * High priority mailbox registers.
649  * Mailbox Registers (8 bytes each, but high half unused)
650  */
651 #define	INTERRUPT_MBOX_0_REG		0x0200
652 #define	INTERRUPT_MBOX_1_REG		0x0208
653 #define	INTERRUPT_MBOX_2_REG		0x0210
654 #define	INTERRUPT_MBOX_3_REG		0x0218
655 #define	INTERRUPT_MBOX_REG(n)		(0x0200+8*(n))
656 
657 /*
658  * Low priority mailbox registers, for BCM5906, BCM5906M.
659  */
660 #define	INTERRUPT_LP_MBOX_0_REG		0x5800
661 
662 /*
663  * Ring Producer/Consumer Index (Mailbox) Registers
664  */
665 #define	RECV_STD_PROD_INDEX_REG		0x0268
666 #define	RECV_JUMBO_PROD_INDEX_REG	0x0270
667 #define	RECV_MINI_PROD_INDEX_REG	0x0278
668 #define	RECV_RING_CONS_INDEX_REGS	0x0280
669 #define	SEND_RING_HOST_PROD_INDEX_REGS	0x0300
670 #define	SEND_RING_NIC_PROD_INDEX_REGS	0x0380
671 
672 #define	RECV_RING_CONS_INDEX_REG(ring)	(0x0280+8*(ring))
673 #define	SEND_RING_HOST_INDEX_REG(ring)	(0x0300+8*(ring))
674 #define	SEND_RING_NIC_INDEX_REG(ring)	(0x0380+8*(ring))
675 
676 /*
677  * Ethernet MAC Mode Register
678  */
679 #define	ETHERNET_MAC_MODE_REG		0x0400
680 #define	ETHERNET_MODE_ENABLE_FHDE	0x00800000
681 #define	ETHERNET_MODE_ENABLE_RDE	0x00400000
682 #define	ETHERNET_MODE_ENABLE_TDE	0x00200000
683 #define	ETHERNET_MODE_ENABLE_MIP	0x00100000
684 #define	ETHERNET_MODE_ENABLE_ACPI	0x00080000
685 #define	ETHERNET_MODE_ENABLE_MAGIC_PKT	0x00040000
686 #define	ETHERNET_MODE_SEND_CFGS		0x00020000
687 #define	ETHERNET_MODE_FLUSH_TX_STATS	0x00010000
688 #define	ETHERNET_MODE_CLEAR_TX_STATS	0x00008000
689 #define	ETHERNET_MODE_ENABLE_TX_STATS	0x00004000
690 #define	ETHERNET_MODE_FLUSH_RX_STATS	0x00002000
691 #define	ETHERNET_MODE_CLEAR_RX_STATS	0x00001000
692 #define	ETHERNET_MODE_ENABLE_RX_STATS	0x00000800
693 #define	ETHERNET_MODE_LINK_POLARITY	0x00000400
694 #define	ETHERNET_MODE_MAX_DEFER		0x00000200
695 #define	ETHERNET_MODE_ENABLE_TX_BURST	0x00000100
696 #define	ETHERNET_MODE_TAGGED_MODE	0x00000080
697 #define	ETHERNET_MODE_MAC_LOOPBACK	0x00000010
698 #define	ETHERNET_MODE_PORTMODE_MASK	0x0000000c
699 #define	ETHERNET_MODE_PORTMODE_TBI	0x0000000c
700 #define	ETHERNET_MODE_PORTMODE_GMII	0x00000008
701 #define	ETHERNET_MODE_PORTMODE_MII	0x00000004
702 #define	ETHERNET_MODE_PORTMODE_NONE	0x00000000
703 #define	ETHERNET_MODE_HALF_DUPLEX	0x00000002
704 #define	ETHERNET_MODE_GLOBAL_RESET	0x00000001
705 
706 /*
707  * Ethernet MAC Status & Event Registers
708  */
709 #define	ETHERNET_MAC_STATUS_REG		0x0404
710 #define	ETHERNET_STATUS_MI_INT		0x00800000
711 #define	ETHERNET_STATUS_MI_COMPLETE	0x00400000
712 #define	ETHERNET_STATUS_LINK_CHANGED	0x00001000
713 #define	ETHERNET_STATUS_PCS_ERROR	0x00000400
714 #define	ETHERNET_STATUS_SYNC_CHANGED	0x00000010
715 #define	ETHERNET_STATUS_CFG_CHANGED	0x00000008
716 #define	ETHERNET_STATUS_RECEIVING_CFG	0x00000004
717 #define	ETHERNET_STATUS_SIGNAL_DETECT	0x00000002
718 #define	ETHERNET_STATUS_PCS_SYNCHED	0x00000001
719 
720 #define	ETHERNET_MAC_EVENT_ENABLE_REG	0x0408
721 #define	ETHERNET_EVENT_MI_INT		0x00800000
722 #define	ETHERNET_EVENT_LINK_INT		0x00001000
723 #define	ETHERNET_STATUS_PCS_ERROR_INT	0x00000400
724 
725 /*
726  * Ethernet MAC LED Control Register
727  *
728  * NOTE: PHY mode 1 *MUST* be selected; this is the hardware default and
729  * the external LED driver circuitry is wired up to assume that this mode
730  * will always be selected.  Software must not change it!
731  */
732 #define	ETHERNET_MAC_LED_CONTROL_REG	0x040c
733 #define	LED_CONTROL_OVERRIDE_BLINK	0x80000000
734 #define	LED_CONTROL_BLINK_PERIOD_MASK	0x7ff80000
735 #define	LED_CONTROL_LED_MODE_MASK	0x00001800
736 #define	LED_CONTROL_LED_MODE_5700	0x00000000
737 #define	LED_CONTROL_LED_MODE_PHY_1	0x00000800	/* mandatory	*/
738 #define	LED_CONTROL_LED_MODE_PHY_2	0x00001000
739 #define	LED_CONTROL_LED_MODE_RESERVED	0x00001800
740 #define	LED_CONTROL_TRAFFIC_LED_STATUS	0x00000400
741 #define	LED_CONTROL_10MBPS_LED_STATUS	0x00000200
742 #define	LED_CONTROL_100MBPS_LED_STATUS	0x00000100
743 #define	LED_CONTROL_1000MBPS_LED_STATUS	0x00000080
744 #define	LED_CONTROL_BLINK_TRAFFIC	0x00000040
745 #define	LED_CONTROL_TRAFFIC_LED		0x00000020
746 #define	LED_CONTROL_OVERRIDE_TRAFFIC	0x00000010
747 #define	LED_CONTROL_10MBPS_LED		0x00000008
748 #define	LED_CONTROL_100MBPS_LED		0x00000004
749 #define	LED_CONTROL_1000MBPS_LED	0x00000002
750 #define	LED_CONTROL_OVERRIDE_LINK	0x00000001
751 #define	LED_CONTROL_DEFAULT		0x02000800
752 
753 /*
754  * MAC Address registers
755  *
756  * These four eight-byte registers each hold one unicast address
757  * (six bytes), right justified & zero-filled on the left.
758  * They will normally all be set to the same value, as a station
759  * usually only has one h/w address.  The value in register 0 is
760  * used for pause packets; any of the four can be specified for
761  * substitution into other transmitted packets if required.
762  */
763 #define	MAC_ADDRESS_0_REG		0x0410
764 #define	MAC_ADDRESS_1_REG		0x0418
765 #define	MAC_ADDRESS_2_REG		0x0420
766 #define	MAC_ADDRESS_3_REG		0x0428
767 
768 #define	MAC_ADDRESS_REG(n)		(0x0410+8*(n))
769 #define	MAC_ADDRESS_REGS_MAX		4
770 
771 /*
772  * More MAC Registers ...
773  */
774 #define	MAC_TX_RANDOM_BACKOFF_REG	0x0438
775 #define	MAC_RX_MTU_SIZE_REG		0x043c
776 #define	MAC_RX_MTU_DEFAULT		0x000005f2	/* 1522	*/
777 #define	MAC_TX_LENGTHS_REG		0x0464
778 #define	MAC_TX_LENGTHS_DEFAULT		0x00002620
779 
780 /*
781  * MII access registers
782  */
783 #define	MI_COMMS_REG			0x044c
784 #define	MI_COMMS_START			0x20000000
785 #define	MI_COMMS_READ_FAILED		0x10000000
786 #define	MI_COMMS_COMMAND_MASK		0x0c000000
787 #define	MI_COMMS_COMMAND_READ		0x08000000
788 #define	MI_COMMS_COMMAND_WRITE		0x04000000
789 #define	MI_COMMS_ADDRESS_MASK		0x03e00000
790 #define	MI_COMMS_ADDRESS_SHIFT		21
791 #define	MI_COMMS_REGISTER_MASK		0x001f0000
792 #define	MI_COMMS_REGISTER_SHIFT		16
793 #define	MI_COMMS_DATA_MASK		0x0000ffff
794 #define	MI_COMMS_DATA_SHIFT		0
795 
796 #define	MI_STATUS_REG			0x0450
797 #define	MI_STATUS_10MBPS		0x00000002
798 #define	MI_STATUS_LINK			0x00000001
799 
800 #define	MI_MODE_REG			0x0454
801 #define	MI_MODE_CLOCK_MASK		0x001f0000
802 #define	MI_MODE_AUTOPOLL		0x00000010
803 #define	MI_MODE_POLL_SHORT_PREAMBLE	0x00000002
804 #define	MI_MODE_DEFAULT			0x000c0000
805 
806 #define	MI_AUTOPOLL_STATUS_REG		0x0458
807 #define	MI_AUTOPOLL_ERROR		0x00000001
808 
809 #define	TRANSMIT_MAC_STATUS_REG		0x0460
810 #define	TRANSMIT_STATUS_ODI_OVERRUN	0x00000020
811 #define	TRANSMIT_STATUS_ODI_UNDERRUN	0x00000010
812 #define	TRANSMIT_STATUS_LINK_UP		0x00000008
813 #define	TRANSMIT_STATUS_SENT_XON	0x00000004
814 #define	TRANSMIT_STATUS_SENT_XOFF	0x00000002
815 #define	TRANSMIT_STATUS_RCVD_XOFF	0x00000001
816 
817 #define	RECEIVE_MAC_STATUS_REG		0x046c
818 #define	RECEIVE_STATUS_RCVD_XON		0x00000004
819 #define	RECEIVE_STATUS_RCVD_XOFF	0x00000002
820 #define	RECEIVE_STATUS_SENT_XOFF	0x00000001
821 
822 /*
823  * These four-byte registers constitute a hash table for deciding
824  * whether to accept incoming multicast packets.  The bits are
825  * numbered in big-endian fashion, from hash 0 => the MSB of
826  * register 0 to hash 127 => the LSB of the highest-numbered
827  * register.
828  *
829  * NOTE: the 5704 can use a 256-bit table (registers 0-7) if
830  * enabled by setting the appropriate bit in the Rx MAC mode
831  * register.  Otherwise, and on all earlier chips, the table
832  * is only 128 bits (registers 0-3).
833  */
834 #define	MAC_HASH_0_REG			0x0470
835 #define	MAC_HASH_1_REG			0x0474
836 #define	MAC_HASH_2_REG			0x0478
837 #define	MAC_HASH_3_REG			0x047c
838 #define	MAC_HASH_4_REG			0x????
839 #define	MAC_HASH_5_REG			0x????
840 #define	MAC_HASH_6_REG			0x????
841 #define	MAC_HASH_7_REG			0x????
842 #define	MAC_HASH_REG(n)			(0x470+4*(n))
843 
844 /*
845  * Receive Rules Registers: 16 pairs of control+mask/value pairs
846  */
847 #define	RCV_RULES_CONTROL_0_REG		0x0480
848 #define	RCV_RULES_MASK_0_REG		0x0484
849 #define	RCV_RULES_CONTROL_15_REG	0x04f8
850 #define	RCV_RULES_MASK_15_REG		0x04fc
851 #define	RCV_RULES_CONFIG_REG		0x0500
852 #define	RCV_RULES_CONFIG_DEFAULT	0x00000008
853 
854 #define	RECV_RULES_NUM_MAX		16
855 #define	RECV_RULE_CONTROL_REG(rule)	(RCV_RULES_CONTROL_0_REG+8*(rule))
856 #define	RECV_RULE_MASK_REG(rule)	(RCV_RULES_MASK_0_REG+8*(rule))
857 
858 #define	RECV_RULE_CTL_ENABLE		0x80000000
859 #define	RECV_RULE_CTL_AND		0x40000000
860 #define	RECV_RULE_CTL_P1		0x20000000
861 #define	RECV_RULE_CTL_P2		0x10000000
862 #define	RECV_RULE_CTL_P3		0x08000000
863 #define	RECV_RULE_CTL_MASK		0x04000000
864 #define	RECV_RULE_CTL_DISCARD		0x02000000
865 #define	RECV_RULE_CTL_MAP		0x01000000
866 #define	RECV_RULE_CTL_RESV_BITS		0x00fc0000
867 #define	RECV_RULE_CTL_OP		0x00030000
868 #define	RECV_RULE_CTL_OP_EQ		0x00000000
869 #define	RECV_RULE_CTL_OP_NEQ		0x00010000
870 #define	RECV_RULE_CTL_OP_GREAT		0x00020000
871 #define	RECV_RULE_CTL_OP_LESS		0x00030000
872 #define	RECV_RULE_CTL_HEADER		0x0000e000
873 #define	RECV_RULE_CTL_HEADER_FRAME	0x00000000
874 #define	RECV_RULE_CTL_HEADER_IP		0x00002000
875 #define	RECV_RULE_CTL_HEADER_TCP	0x00004000
876 #define	RECV_RULE_CTL_HEADER_UDP	0x00006000
877 #define	RECV_RULE_CTL_HEADER_DATA	0x00008000
878 #define	RECV_RULE_CTL_CLASS_BITS	0x00001f00
879 #define	RECV_RULE_CTL_CLASS(ring)	(((ring) << 8) & \
880 					    RECV_RULE_CTL_CLASS_BITS)
881 #define	RECV_RULE_CTL_OFFSET		0x000000ff
882 
883 /*
884  * Receive Rules definition
885  */
886 #define	ETHERHEADER_DEST_OFFSET		0x00
887 #define	IPHEADER_PROTO_OFFSET		0x08
888 #define	IPHEADER_SIP_OFFSET		0x0c
889 #define	IPHEADER_DIP_OFFSET		0x10
890 #define	TCPHEADER_SPORT_OFFSET		0x00
891 #define	TCPHEADER_DPORT_OFFSET		0x02
892 #define	UDPHEADER_SPORT_OFFSET		0x00
893 #define	UDPHEADER_DPORT_OFFSET		0x02
894 
895 #define	RULE_MATCH(ring)	(RECV_RULE_CTL_ENABLE | RECV_RULE_CTL_OP_EQ | \
896 				    RECV_RULE_CTL_CLASS((ring)))
897 
898 #define	RULE_MATCH_MASK(ring)	(RULE_MATCH(ring) | RECV_RULE_CTL_MASK)
899 
900 #define	RULE_DEST_MAC_1(ring)	(RULE_MATCH(ring) | \
901 				    RECV_RULE_CTL_HEADER_FRAME | \
902 				    ETHERHEADER_DEST_OFFSET)
903 
904 #define	RULE_DEST_MAC_2(ring)	(RULE_MATCH_MASK(ring) | \
905 				    RECV_RULE_CTL_HEADER_FRAME | \
906 				    ETHERHEADER_DEST_OFFSET + 4)
907 
908 #define	RULE_LOCAL_IP(ring)	(RULE_MATCH(ring) | RECV_RULE_CTL_HEADER_IP | \
909 				    IPHEADER_DIP_OFFSET)
910 
911 #define	RULE_REMOTE_IP(ring)	(RULE_MATCH(ring) | RECV_RULE_CTL_HEADER_IP | \
912 				    IPHEADER_SIP_OFFSET)
913 
914 #define	RULE_IP_PROTO(ring)	(RULE_MATCH_MASK(ring) | \
915 				    RECV_RULE_CTL_HEADER_IP | \
916 				    IPHEADER_PROTO_OFFSET)
917 
918 #define	RULE_TCP_SPORT(ring)	(RULE_MATCH_MASK(ring) | \
919 				    RECV_RULE_CTL_HEADER_TCP | \
920 				    TCPHEADER_SPORT_OFFSET)
921 
922 #define	RULE_TCP_DPORT(ring)	(RULE_MATCH_MASK(ring) | \
923 				    RECV_RULE_CTL_HEADER_TCP | \
924 				    TCPHEADER_DPORT_OFFSET)
925 
926 #define	RULE_UDP_SPORT(ring)	(RULE_MATCH_MASK(ring) | \
927 				    RECV_RULE_CTL_HEADER_UDP | \
928 				    UDPHEADER_SPORT_OFFSET)
929 
930 #define	RULE_UDP_DPORT(ring)	(RULE_MATCH_MASK(ring) | \
931 				    RECV_RULE_CTL_HEADER_UDP | \
932 				    UDPHEADER_DPORT_OFFSET)
933 
934 /*
935  * 1000BaseX low-level access registers
936  */
937 #define	MAC_GIGABIT_PCS_TEST_REG	0x0440
938 #define	MAC_GIGABIT_PCS_TEST_ENABLE	0x00100000
939 #define	MAC_GIGABIT_PCS_TEST_PATTERN	0x000fffff
940 #define	TX_1000BASEX_AUTONEG_REG	0x0444
941 #define	RX_1000BASEX_AUTONEG_REG	0x0448
942 
943 /*
944  * Autoneg code bits for the 1000BASE-X AUTONEG registers
945  */
946 #define	AUTONEG_CODE_PAUSE		0x00008000
947 #define	AUTONEG_CODE_HALF_DUPLEX	0x00004000
948 #define	AUTONEG_CODE_FULL_DUPLEX	0x00002000
949 #define	AUTONEG_CODE_NEXT_PAGE		0x00000080
950 #define	AUTONEG_CODE_ACKNOWLEDGE	0x00000040
951 #define	AUTONEG_CODE_FAULT_MASK		0x00000030
952 #define	AUTONEG_CODE_FAULT_ANEG_ERR	0x00000030
953 #define	AUTONEG_CODE_FAULT_LINK_FAIL	0x00000020
954 #define	AUTONEG_CODE_FAULT_OFFLINE	0x00000010
955 #define	AUTONEG_CODE_ASYM_PAUSE		0x00000001
956 
957 /*
958  * SerDes Registers (5703S/5704S only)
959  */
960 #define	SERDES_CONTROL_REG		0x0590
961 #define	SERDES_CONTROL_TBI_LOOPBACK	0x00020000
962 #define	SERDES_CONTROL_COMMA_DETECT	0x00010000
963 #define	SERDES_CONTROL_TX_DISABLE	0x00004000
964 #define	SERDES_STATUS_REG		0x0594
965 #define	SERDES_STATUS_COMMA_DETECTED	0x00000100
966 #define	SERDES_STATUS_RXSTAT		0x000000ff
967 
968 /*
969  * SGMII Status Register (5717/5718 only)
970  */
971 #define	SGMII_STATUS_REG	0x5B4
972 #define	MEDIA_SELECTION_MODE	0x00000100
973 
974 /*
975  * Statistic Registers (5705/5788/5721/5751/5752/5714/5715 only)
976  */
977 #define	STAT_IFHCOUT_OCTETS_REG		0x0800
978 #define	STAT_ETHER_COLLIS_REG		0x0808
979 #define	STAT_OUTXON_SENT_REG		0x080c
980 #define	STAT_OUTXOFF_SENT_REG		0x0810
981 #define	STAT_DOT3_INTMACTX_ERR_REG		0x0818
982 #define	STAT_DOT3_SCOLLI_FRAME_REG		0x081c
983 #define	STAT_DOT3_MCOLLI_FRAME_REG		0x0820
984 #define	STAT_DOT3_DEFERED_TX_REG		0x0824
985 #define	STAT_DOT3_EXCE_COLLI_REG		0x082c
986 #define	STAT_DOT3_LATE_COLLI_REG		0x0830
987 #define	STAT_IFHCOUT_UPKGS_REG		0x086c
988 #define	STAT_IFHCOUT_MPKGS_REG		0x0870
989 #define	STAT_IFHCOUT_BPKGS_REG		0x0874
990 
991 #define	STAT_IFHCIN_OCTETS_REG		0x0880
992 #define	STAT_ETHER_FRAGMENT_REG		0x0888
993 #define	STAT_IFHCIN_UPKGS_REG		0x088c
994 #define	STAT_IFHCIN_MPKGS_REG		0x0890
995 #define	STAT_IFHCIN_BPKGS_REG		0x0894
996 
997 #define	STAT_DOT3_FCS_ERR_REG		0x0898
998 #define	STAT_DOT3_ALIGN_ERR_REG		0x089c
999 #define	STAT_XON_PAUSE_RX_REG		0x08a0
1000 #define	STAT_XOFF_PAUSE_RX_REG		0x08a4
1001 #define	STAT_MAC_CTRL_RX_REG		0x08a8
1002 #define	STAT_XOFF_STATE_ENTER_REG		0x08ac
1003 #define	STAT_DOT3_FRAME_TOOLONG_REG		0x08b0
1004 #define	STAT_ETHER_JABBERS_REG		0x08b4
1005 #define	STAT_ETHER_UNDERSIZE_REG		0x08b8
1006 #define	SIZE_OF_STATISTIC_REG		0x1B
1007 /*
1008  * Send Data Initiator Registers
1009  */
1010 #define	SEND_INIT_STATS_CONTROL_REG	0x0c08
1011 #define	SEND_INIT_STATS_ZERO		0x00000010
1012 #define	SEND_INIT_STATS_FLUSH		0x00000008
1013 #define	SEND_INIT_STATS_CLEAR		0x00000004
1014 #define	SEND_INIT_STATS_FASTER		0x00000002
1015 #define	SEND_INIT_STATS_ENABLE		0x00000001
1016 
1017 #define	SEND_INIT_STATS_ENABLE_MASK_REG	0x0c0c
1018 
1019 /*
1020  * Send Buffer Descriptor Selector Control Registers
1021  */
1022 #define	SEND_BD_SELECTOR_STATUS_REG	0x1404
1023 #define	SEND_BD_SELECTOR_HWDIAG_REG	0x1408
1024 #define	SEND_BD_SELECTOR_INDEX_REG(n)	(0x1440+4*(n))
1025 
1026 /*
1027  * Receive List Placement Registers
1028  */
1029 #define	RCV_LP_CONFIG_REG		0x2010
1030 #define	RCV_LP_CONFIG_DEFAULT		0x00000009
1031 #define	RCV_LP_CONFIG(rings)		(((rings) << 3) | 0x1)
1032 
1033 #define	RCV_LP_STATS_CONTROL_REG	0x2014
1034 #define	RCV_LP_STATS_ZERO		0x00000010
1035 #define	RCV_LP_STATS_FLUSH		0x00000008
1036 #define	RCV_LP_STATS_CLEAR		0x00000004
1037 #define	RCV_LP_STATS_FASTER		0x00000002
1038 #define	RCV_LP_STATS_ENABLE		0x00000001
1039 
1040 #define	RCV_LP_STATS_ENABLE_MASK_REG	0x2018
1041 #define	RCV_LP_STATS_DISABLE_MACTQ	0x040000
1042 
1043 /*
1044  * Receive Data & BD Initiator Registers
1045  */
1046 #define	RCV_INITIATOR_STATUS_REG	0x2404
1047 
1048 /*
1049  * Receive Buffer Descriptor Ring Control Block Registers
1050  * NB: sixteen bytes (128 bits) each
1051  */
1052 #define	JUMBO_RCV_BD_RING_RCB_REG	0x2440
1053 #define	STD_RCV_BD_RING_RCB_REG		0x2450
1054 #define	MINI_RCV_BD_RING_RCB_REG	0x2460
1055 
1056 /*
1057  * Receive Buffer Descriptor Ring Replenish Threshold Registers
1058  */
1059 #define	MINI_RCV_BD_REPLENISH_REG	0x2c14
1060 #define	MINI_RCV_BD_REPLENISH_DEFAULT	0x00000080	/* 128	*/
1061 #define	STD_RCV_BD_REPLENISH_REG	0x2c18
1062 #define	STD_RCV_BD_REPLENISH_DEFAULT	0x00000002	/* 2	*/
1063 #define	JUMBO_RCV_BD_REPLENISH_REG	0x2c1c
1064 #define	JUMBO_RCV_BD_REPLENISH_DEFAULT	0x00000020	/* 32	*/
1065 
1066 /*
1067  * CPMU registers (5717/5718 only)
1068  */
1069 #define	CPMU_STATUS_REG	0x362c
1070 #define	CPMU_STATUS_FUN_NUM	0x20000000
1071 
1072 /*
1073  * Host Coalescing Engine Control Registers
1074  */
1075 #define	RCV_COALESCE_TICKS_REG		0x3c08
1076 #define	RCV_COALESCE_TICKS_DEFAULT	0x00000096	/* 150	*/
1077 #define	SEND_COALESCE_TICKS_REG		0x3c0c
1078 #define	SEND_COALESCE_TICKS_DEFAULT	0x00000096	/* 150	*/
1079 #define	RCV_COALESCE_MAX_BD_REG		0x3c10
1080 #define	RCV_COALESCE_MAX_BD_DEFAULT	0x0000000a	/* 10	*/
1081 #define	SEND_COALESCE_MAX_BD_REG	0x3c14
1082 #define	SEND_COALESCE_MAX_BD_DEFAULT	0x0000000a	/* 10	*/
1083 #define	RCV_COALESCE_INT_TICKS_REG	0x3c18
1084 #define	RCV_COALESCE_INT_TICKS_DEFAULT	0x00000000	/* 0	*/
1085 #define	SEND_COALESCE_INT_TICKS_REG	0x3c1c
1086 #define	SEND_COALESCE_INT_TICKS_DEFAULT	0x00000000	/* 0	*/
1087 #define	RCV_COALESCE_INT_BD_REG		0x3c20
1088 #define	RCV_COALESCE_INT_BD_DEFAULT	0x00000000	/* 0	*/
1089 #define	SEND_COALESCE_INT_BD_REG	0x3c24
1090 #define	SEND_COALESCE_INT_BD_DEFAULT	0x00000000	/* 0	*/
1091 #define	STATISTICS_TICKS_REG		0x3c28
1092 #define	STATISTICS_TICKS_DEFAULT	0x000f4240	/* 1000000 */
1093 #define	STATISTICS_HOST_ADDR_REG	0x3c30
1094 #define	STATUS_BLOCK_HOST_ADDR_REG	0x3c38
1095 #define	STATISTICS_BASE_ADDR_REG	0x3c40
1096 #define	STATUS_BLOCK_BASE_ADDR_REG	0x3c44
1097 #define	FLOW_ATTN_REG			0x3c48
1098 
1099 #define	NIC_JUMBO_RECV_INDEX_REG	0x3c50
1100 #define	NIC_STD_RECV_INDEX_REG		0x3c54
1101 #define	NIC_MINI_RECV_INDEX_REG		0x3c58
1102 #define	NIC_DIAG_RETURN_INDEX_REG(n)	(0x3c80+4*(n))
1103 #define	NIC_DIAG_SEND_INDEX_REG(n)	(0x3cc0+4*(n))
1104 
1105 /*
1106  * Mbuf Pool Initialisation & Watermark Registers
1107  *
1108  * There are some conflicts in the PRM; compare the recommendations
1109  * on pp. 115, 236, and 339.  The values here were recommended by
1110  * dkim@broadcom.com (and the PRM should be corrected soon ;-)
1111  */
1112 #define	BUFFER_MANAGER_STATUS_REG	0x4404
1113 #define	MBUF_POOL_BASE_REG		0x4408
1114 #define	MBUF_POOL_BASE_DEFAULT		0x00008000
1115 #define	MBUF_POOL_BASE_5721		0x00010000
1116 #define	MBUF_POOL_BASE_5704		0x00010000
1117 #define	MBUF_POOL_BASE_5705		0x00010000
1118 #define	MBUF_POOL_LENGTH_REG		0x440c
1119 #define	MBUF_POOL_LENGTH_DEFAULT	0x00018000
1120 #define	MBUF_POOL_LENGTH_5704		0x00010000
1121 #define	MBUF_POOL_LENGTH_5705		0x00008000
1122 #define	MBUF_POOL_LENGTH_5721		0x00008000
1123 #define	RDMA_MBUF_LOWAT_REG		0x4410
1124 #define	RDMA_MBUF_LOWAT_DEFAULT		0x00000050
1125 #define	RDMA_MBUF_LOWAT_5705		0x00000000
1126 #define	RDMA_MBUF_LOWAT_5906		0x00000000
1127 #define	RDMA_MBUF_LOWAT_JUMBO		0x00000130
1128 #define	RDMA_MBUF_LOWAT_5714_JUMBO	0x00000000
1129 #define	MAC_RX_MBUF_LOWAT_REG		0x4414
1130 #define	MAC_RX_MBUF_LOWAT_DEFAULT	0x00000020
1131 #define	MAC_RX_MBUF_LOWAT_5705		0x00000010
1132 #define	MAC_RX_MBUF_LOWAT_5906		0x00000004
1133 #define	MAC_RX_MBUF_LOWAT_5717		0x0000002a
1134 #define	MAC_RX_MBUF_LOWAT_JUMBO		0x00000098
1135 #define	MAC_RX_MBUF_LOWAT_5714_JUMBO	0x0000004b
1136 #define	MBUF_HIWAT_REG			0x4418
1137 #define	MBUF_HIWAT_DEFAULT		0x00000060
1138 #define	MBUF_HIWAT_5705			0x00000060
1139 #define	MBUF_HIWAT_5906			0x00000010
1140 #define	MBUF_HIWAT_5717			0x000000a0
1141 #define	MBUF_HIWAT_JUMBO		0x0000017c
1142 #define	MBUF_HIWAT_5714_JUMBO		0x00000096
1143 
1144 /*
1145  * DMA Descriptor Pool Initialisation & Watermark Registers
1146  */
1147 #define	DMAD_POOL_BASE_REG		0x442c
1148 #define	DMAD_POOL_BASE_DEFAULT		0x00002000
1149 #define	DMAD_POOL_LENGTH_REG		0x4430
1150 #define	DMAD_POOL_LENGTH_DEFAULT	0x00002000
1151 #define	DMAD_POOL_LOWAT_REG		0x4434
1152 #define	DMAD_POOL_LOWAT_DEFAULT		0x00000005	/* 5	*/
1153 #define	DMAD_POOL_HIWAT_REG		0x4438
1154 #define	DMAD_POOL_HIWAT_DEFAULT		0x0000000a	/* 10	*/
1155 
1156 /*
1157  * More threshold/watermark registers ...
1158  */
1159 #define	RECV_FLOW_THRESHOLD_REG		0x4458
1160 #define	LOWAT_MAX_RECV_FRAMES_REG	0x0504
1161 #define	LOWAT_MAX_RECV_FRAMES_DEFAULT	0x00000002
1162 
1163 /*
1164  * Read/Write DMA Status Registers
1165  */
1166 #define	READ_DMA_STATUS_REG		0x4804
1167 #define	WRITE_DMA_STATUS_REG		0x4c04
1168 
1169 /*
1170  * RX/TX RISC Registers
1171  */
1172 #define	RX_RISC_MODE_REG		0x5000
1173 #define	RX_RISC_STATE_REG		0x5004
1174 #define	RX_RISC_PC_REG			0x501c
1175 #define	TX_RISC_MODE_REG		0x5400
1176 #define	TX_RISC_STATE_REG		0x5404
1177 #define	TX_RISC_PC_REG			0x541c
1178 
1179 /*
1180  * V? RISC Registerss
1181  */
1182 #define	VCPU_STATUS_REG			0x5100
1183 #define	VCPU_INIT_DONE			0x04000000
1184 #define	VCPU_DRV_RESET			0x08000000
1185 
1186 #define	VCPU_EXT_CTL			0x6890
1187 #define	VCPU_EXT_CTL_HALF		0x00400000
1188 
1189 #define	FTQ_RESET_REG			0x5c00
1190 
1191 #define	MSI_MODE_REG			0x6000
1192 #define	MSI_PRI_HIGHEST			0xc0000000
1193 #define	MSI_MSI_ENABLE			0x00000002
1194 #define	MSI_ERROR_ATTENTION		0x0000001c
1195 
1196 #define	MSI_STATUS_REG			0x6004
1197 
1198 #define	MODE_CONTROL_REG		0x6800
1199 #define	MODE_ROUTE_MCAST_TO_RX_RISC	0x40000000
1200 #define	MODE_4X_NIC_SEND_RINGS		0x20000000
1201 #define	MODE_INT_ON_FLOW_ATTN		0x10000000
1202 #define	MODE_INT_ON_DMA_ATTN		0x08000000
1203 #define	MODE_INT_ON_MAC_ATTN		0x04000000
1204 #define	MODE_INT_ON_RXRISC_ATTN		0x02000000
1205 #define	MODE_INT_ON_TXRISC_ATTN		0x01000000
1206 #define	MODE_RECV_NO_PSEUDO_HDR_CSUM	0x00800000
1207 #define	MODE_SEND_NO_PSEUDO_HDR_CSUM	0x00100000
1208 #define	MODE_HOST_SEND_BDS		0x00020000
1209 #define	MODE_HOST_STACK_UP		0x00010000
1210 #define	MODE_FORCE_32_BIT_PCI		0x00008000
1211 #define	MODE_NO_INT_ON_RECV		0x00004000
1212 #define	MODE_NO_INT_ON_SEND		0x00002000
1213 #define	MODE_ALLOW_BAD_FRAMES		0x00000800
1214 #define	MODE_NO_CRC			0x00000400
1215 #define	MODE_NO_FRAME_CRACKING		0x00000200
1216 #define	MODE_WORD_SWAP_FRAME		0x00000020
1217 #define	MODE_BYTE_SWAP_FRAME		0x00000010
1218 #define	MODE_WORD_SWAP_NONFRAME		0x00000004
1219 #define	MODE_BYTE_SWAP_NONFRAME		0x00000002
1220 #define	MODE_UPDATE_ON_COAL_ONLY	0x00000001
1221 
1222 /*
1223  * Miscellaneous Configuration Register
1224  *
1225  * This contains various bits relating to power control (which differ
1226  * among different members of the chip family), but the important bits
1227  * for our purposes are the RESET bit and the Timer Prescaler field.
1228  *
1229  * The RESET bit in this register serves to reset the whole chip, even
1230  * including the PCI interface(!)  Once it's set, the chip will not
1231  * respond to ANY accesses -- not even CONFIG space -- until the reset
1232  * completes internally.  According to the PRM, this should take less
1233  * than 100us.  Any access during this period will get a bus error.
1234  *
1235  * The Timer Prescaler field must be programmed so that the timer period
1236  * is as near as possible to 1us.  The value in this field should be
1237  * the Core Clock frequency in MHz minus 1.  From my reading of the PRM,
1238  * the Core Clock should always be 66MHz (independently of the bus speed,
1239  * at least for PCI rather than PCI-X), so this register must be set to
1240  * the value 0x82 ((66-1) << 1).
1241  */
1242 #define	CORE_CLOCK_MHZ			66
1243 #define	MISC_CONFIG_REG			0x6804
1244 #define	MISC_CONFIG_GRC_RESET_DISABLE   0x20000000
1245 #define	MISC_CONFIG_GPHY_POWERDOWN_OVERRIDE 0x04000000
1246 #define	MISC_CONFIG_POWERDOWN		0x00100000
1247 #define	MISC_CONFIG_POWER_STATE		0x00060000
1248 #define	MISC_CONFIG_PRESCALE_MASK	0x000000fe
1249 #define	MISC_CONFIG_RESET_BIT		0x00000001
1250 #define	MISC_CONFIG_DEFAULT		(((CORE_CLOCK_MHZ)-1) << 1)
1251 #define	MISC_CONFIG_EPHY_IDDQ		0x00200000
1252 
1253 /*
1254  * Miscellaneous Local Control Register (MLCR)
1255  */
1256 #define	MISC_LOCAL_CONTROL_REG		0x6808
1257 #define	MLCR_PCI_CTRL_SELECT		0x10000000
1258 #define	MLCR_LEGACY_PCI_MODE		0x08000000
1259 #define	MLCR_AUTO_SEEPROM_ACCESS	0x01000000
1260 #define	MLCR_SSRAM_CYCLE_DESELECT	0x00800000
1261 #define	MLCR_SSRAM_TYPE			0x00400000
1262 #define	MLCR_BANK_SELECT		0x00200000
1263 #define	MLCR_SRAM_SIZE_MASK		0x001c0000
1264 #define	MLCR_ENABLE_EXTERNAL_MEMORY	0x00020000
1265 
1266 #define	MLCR_MISC_PINS_OUTPUT_2		0x00010000
1267 #define	MLCR_MISC_PINS_OUTPUT_1		0x00008000
1268 #define	MLCR_MISC_PINS_OUTPUT_0		0x00004000
1269 #define	MLCR_MISC_PINS_OUTPUT_ENABLE_2	0x00002000
1270 #define	MLCR_MISC_PINS_OUTPUT_ENABLE_1	0x00001000
1271 #define	MLCR_MISC_PINS_OUTPUT_ENABLE_0	0x00000800
1272 #define	MLCR_MISC_PINS_INPUT_2		0x00000400	/* R/O	*/
1273 #define	MLCR_MISC_PINS_INPUT_1		0x00000200	/* R/O	*/
1274 #define	MLCR_MISC_PINS_INPUT_0		0x00000100	/* R/O	*/
1275 
1276 #define	MLCR_INT_ON_ATTN		0x00000008	/* R/W	*/
1277 #define	MLCR_SET_INT			0x00000004	/* W/O	*/
1278 #define	MLCR_CLR_INT			0x00000002	/* W/O	*/
1279 #define	MLCR_INTA_STATE			0x00000001	/* R/O	*/
1280 
1281 /*
1282  * This value defines all GPIO bits as INPUTS, but sets their default
1283  * values as outputs to HIGH, on the assumption that external circuits
1284  * (if any) will probably be active-LOW with passive pullups.
1285  *
1286  * The Claymore blade uses GPIO1 to control writing to the SEEPROM in
1287  * just this fashion.  It has to be set as an OUTPUT and driven LOW to
1288  * enable writing.  Otherwise, the SEEPROM is protected.
1289  */
1290 #define	MLCR_DEFAULT			0x0101c000
1291 #define	MLCR_DEFAULT_5714		0x1901c000
1292 #define	MLCR_DEFAULT_5717		0x01000000
1293 
1294 /*
1295  * Serial EEPROM Data/Address Registers (auto-access mode)
1296  */
1297 #define	SERIAL_EEPROM_DATA_REG		0x683c
1298 #define	SERIAL_EEPROM_ADDRESS_REG	0x6838
1299 #define	SEEPROM_ACCESS_READ		0x80000000
1300 #define	SEEPROM_ACCESS_WRITE		0x00000000
1301 #define	SEEPROM_ACCESS_COMPLETE		0x40000000
1302 #define	SEEPROM_ACCESS_RESET		0x20000000
1303 #define	SEEPROM_ACCESS_DEVID_MASK	0x1c000000
1304 #define	SEEPROM_ACCESS_START		0x02000000
1305 #define	SEEPROM_ACCESS_HALFCLOCK_MASK	0x01ff0000
1306 #define	SEEPROM_ACCESS_ADDRESS_MASK	0x0000fffc
1307 
1308 #define	SEEPROM_ACCESS_DEVID_SHIFT	26		/* bits	*/
1309 #define	SEEPROM_ACCESS_HALFCLOCK_SHIFT	16		/* bits */
1310 #define	SEEPROM_ACCESS_ADDRESS_SIZE	16		/* bits	*/
1311 
1312 #define	SEEPROM_ACCESS_HALFCLOCK_340KHZ	0x0060		/* 340kHz */
1313 #define	SEEPROM_ACCESS_INIT		0x20600000	/* reset+clock	*/
1314 
1315 /*
1316  * "Linearised" address mask, treating multiple devices as consecutive
1317  */
1318 #define	SEEPROM_DEV_AND_ADDR_MASK	0x0007fffc	/* 8x64k devices */
1319 
1320 /*
1321  * Non-Volatile Memory Interface Registers
1322  * Note: on chips that support the flash interface (5702+), flash is the
1323  * default and the legacy seeprom interface must be explicitly enabled
1324  * if required. On older chips (5700/01), SEEPROM is the default (and
1325  * only) non-volatile memory available, and these registers don't exist!
1326  */
1327 #define	NVM_FLASH_CMD_REG		0x7000
1328 #define	NVM_FLASH_CMD_LAST		0x00000100
1329 #define	NVM_FLASH_CMD_FIRST		0x00000080
1330 #define	NVM_FLASH_CMD_RD		0x00000000
1331 #define	NVM_FLASH_CMD_WR		0x00000020
1332 #define	NVM_FLASH_CMD_DOIT		0x00000010
1333 #define	NVM_FLASH_CMD_DONE		0x00000008
1334 
1335 #define	NVM_FLASH_WRITE_REG		0x7008
1336 #define	NVM_FLASH_READ_REG		0x7010
1337 
1338 #define	NVM_FLASH_ADDR_REG		0x700c
1339 #define	NVM_FLASH_ADDR_MASK		0x00fffffc
1340 
1341 #define	NVM_CONFIG1_REG			0x7014
1342 #define	NVM_CFG1_LEGACY_SEEPROM_MODE	0x80000000
1343 #define	NVM_CFG1_SEE_CLK_DIV_MASK	0x003ff800
1344 #define	NVM_CFG1_SPI_CLK_DIV_MASK	0x00000780
1345 #define	NVM_CFG1_BUFFERED_MODE		0x00000002
1346 #define	NVM_CFG1_FLASH_MODE		0x00000001
1347 
1348 #define	NVM_SW_ARBITRATION_REG		0x7020
1349 #define	NVM_READ_REQ3			0X00008000
1350 #define	NVM_READ_REQ2			0X00004000
1351 #define	NVM_READ_REQ1			0X00002000
1352 #define	NVM_READ_REQ0			0X00001000
1353 #define	NVM_WON_REQ3			0X00000800
1354 #define	NVM_WON_REQ2			0X00000400
1355 #define	NVM_WON_REQ1			0X00000200
1356 #define	NVM_WON_REQ0			0X00000100
1357 #define	NVM_RESET_REQ3			0X00000080
1358 #define	NVM_RESET_REQ2			0X00000040
1359 #define	NVM_RESET_REQ1			0X00000020
1360 #define	NVM_RESET_REQ0			0X00000010
1361 #define	NVM_SET_REQ3			0X00000008
1362 #define	NVM_SET_REQ2			0X00000004
1363 #define	NVM_SET_REQ1			0X00000002
1364 #define	NVM_SET_REQ0			0X00000001
1365 
1366 /*
1367  * NVM access register
1368  * Applicable to BCM5721,BCM5751,BCM5752,BCM5714
1369  * and BCM5715 only.
1370  */
1371 #define	NVM_ACCESS_REG			0X7024
1372 #define	NVM_WRITE_ENABLE		0X00000002
1373 #define	NVM_ACCESS_ENABLE		0X00000001
1374 
1375 /*
1376  * TLP Control Register
1377  * Applicable to BCM5721 and BCM5751 only
1378  */
1379 #define	TLP_CONTROL_REG			0x7c00
1380 #define	TLP_DATA_FIFO_PROTECT		0x02000000
1381 
1382 /*
1383  * PHY Test Control Register
1384  * Applicable to BCM5721 and BCM5751 only
1385  */
1386 #define	PHY_TEST_CTRL_REG		0x7e2c
1387 #define	PHY_PCIE_SCRAM_MODE		0x20
1388 #define	PHY_PCIE_LTASS_MODE		0x40
1389 
1390 /*
1391  * The internal firmware expects a certain layout of the non-volatile
1392  * memory (if fitted), and will check for it during startup, and use the
1393  * contents to initialise various internal parameters if it looks good.
1394  *
1395  * The offsets and field definitions below refer to where to find some
1396  * important values, and how to interpret them ...
1397  */
1398 #define	NVMEM_DATA_MAC_ADDRESS		0x007c		/* 8 bytes	*/
1399 #define	NVMEM_DATA_MAC_ADDRESS_5906	0x0010		/* 8 bytes	*/
1400 
1401 /*
1402  * Vendor-specific MII registers
1403  */
1404 #define	MII_EXT_CONTROL			MII_VENDOR(0)
1405 #define	MII_EXT_STATUS			MII_VENDOR(1)
1406 #define	MII_RCV_ERR_COUNT		MII_VENDOR(2)
1407 #define	MII_FALSE_CARR_COUNT		MII_VENDOR(3)
1408 #define	MII_RCV_NOT_OK_COUNT		MII_VENDOR(4)
1409 #define	MII_AUX_CONTROL			MII_VENDOR(8)
1410 #define	MII_AUX_STATUS			MII_VENDOR(9)
1411 #define	MII_INTR_STATUS			MII_VENDOR(10)
1412 #define	MII_INTR_MASK			MII_VENDOR(11)
1413 #define	MII_HCD_STATUS			MII_VENDOR(13)
1414 
1415 #define	MII_MAXREG			MII_VENDOR(15)	/* 31, 0x1f	*/
1416 
1417 /*
1418  * Bits in the MII_EXT_CONTROL register
1419  */
1420 #define	MII_EXT_CTRL_INTERFACE_TBI	0x8000
1421 #define	MII_EXT_CTRL_DISABLE_AUTO_MDIX	0x4000
1422 #define	MII_EXT_CTRL_DISABLE_TRANSMIT	0x2000
1423 #define	MII_EXT_CTRL_DISABLE_INTERRUPT	0x1000
1424 #define	MII_EXT_CTRL_FORCE_INTERRUPT	0x0800
1425 #define	MII_EXT_CTRL_BYPASS_4B5B	0x0400
1426 #define	MII_EXT_CTRL_BYPASS_SCRAMBLER	0x0200
1427 #define	MII_EXT_CTRL_BYPASS_MLT3	0x0100
1428 #define	MII_EXT_CTRL_BYPASS_RX_ALIGN	0x0080
1429 #define	MII_EXT_CTRL_RESET_SCRAMBLER	0x0040
1430 #define	MII_EXT_CTRL_LED_TRAFFIC_MODE	0x0020
1431 #define	MII_EXT_CTRL_FORCE_LEDS_ON	0x0010
1432 #define	MII_EXT_CTRL_FORCE_LEDS_OFF	0x0008
1433 #define	MII_EXT_CTRL_EXTEND_TX_IPG	0x0004
1434 #define	MII_EXT_CTRL_3LINK_LED_MODE	0x0002
1435 #define	MII_EXT_CTRL_FIFO_ELASTICITY	0x0001
1436 
1437 /*
1438  * Bits in the MII_EXT_STATUS register
1439  */
1440 #define	MII_EXT_STAT_S3MII_FIFO_ERROR	0x8000
1441 #define	MII_EXT_STAT_WIRESPEED_DOWNGRADE 0x4000
1442 #define	MII_EXT_STAT_MDIX_STATE		0x2000
1443 #define	MII_EXT_STAT_INTERRUPT_STATUS	0x1000
1444 #define	MII_EXT_STAT_REMOTE_RCVR_STATUS	0x0800
1445 #define	MII_EXT_STAT_LOCAL_RDVR_STATUS	0x0400
1446 #define	MII_EXT_STAT_DESCRAMBLER_LOCKED	0x0200
1447 #define	MII_EXT_STAT_LINK_STATUS	0x0100
1448 #define	MII_EXT_STAT_CRC_ERROR		0x0080
1449 #define	MII_EXT_STAT_CARR_EXT_ERROR	0x0040
1450 #define	MII_EXT_STAT_BAD_SSD_ERROR	0x0020
1451 #define	MII_EXT_STAT_BAD_ESD_ERROR	0x0010
1452 #define	MII_EXT_STAT_RECEIVE_ERROR	0x0008
1453 #define	MII_EXT_STAT_TRANSMIT_ERROR	0x0004
1454 #define	MII_EXT_STAT_LOCK_ERROR		0x0002
1455 #define	MII_EXT_STAT_MLT3_CODE_ERROR	0x0001
1456 
1457 /*
1458  * The AUX CONTROL register is seriously weird!
1459  *
1460  * It hides (up to) eight 'shadow' registers.  When writing, which one
1461  * of them is written is determined by the low-order bits of the data
1462  * written(!), but when reading, which one is read is determined by the
1463  * value previously written to (part of) one of the shadow registers!!!
1464  */
1465 
1466 /*
1467  * Shadow register numbers
1468  */
1469 #define	MII_AUX_CTRL_NORMAL		0
1470 #define	MII_AUX_CTRL_10BASE_T		1
1471 #define	MII_AUX_CTRL_POWER		2
1472 #define	MII_AUX_CTRL_TEST_1		4
1473 #define	MII_AUX_CTRL_MISC		7
1474 
1475 /*
1476  * Selected bits in some of the shadow registers ...
1477  */
1478 #define	MII_AUX_CTRL_NORM_EXT_LOOPBACK	0x8000
1479 #define	MII_AUX_CTRL_NORM_LONG_PKTS	0x4000
1480 #define	MII_AUX_CTRL_NORM_EDGE_CTRL	0x3000
1481 #define	MII_AUX_CTRL_NORM_TX_MODE	0x0400
1482 #define	MII_AUX_CTRL_NORM_CABLE_TEST	0x0008
1483 
1484 #define	MII_AUX_CTRL_TEST_TX_HALF	0x0008
1485 
1486 #define	MII_AUX_CTRL_MISC_WRITE_ENABLE	0x8000
1487 #define	MII_AUX_CTRL_MISC_WIRE_SPEED	0x0010
1488 
1489 /*
1490  * Write this value to the AUX control register
1491  * to select which shadow register will be read
1492  */
1493 #define	MII_AUX_CTRL_SHADOW_READ(x)	(((x) << 12) | MII_AUX_CTRL_MISC)
1494 
1495 /*
1496  * Bits in the MII_AUX_STATUS register
1497  */
1498 #define	MII_AUX_STATUS_MODE_MASK	0x0700
1499 #define	MII_AUX_STATUS_MODE_1000_F	0x0700
1500 #define	MII_AUX_STATUS_MODE_1000_H	0x0600
1501 #define	MII_AUX_STATUS_MODE_100_F	0x0500
1502 #define	MII_AUX_STATUS_MODE_100_4	0x0400
1503 #define	MII_AUX_STATUS_MODE_100_H	0x0300
1504 #define	MII_AUX_STATUS_MODE_10_F	0x0200
1505 #define	MII_AUX_STATUS_MODE_10_H	0x0100
1506 #define	MII_AUX_STATUS_MODE_NONE	0x0000
1507 #define	MII_AUX_STATUS_MODE_SHIFT	8
1508 
1509 #define	MII_AUX_STATUS_PAR_FAULT	0x0080
1510 #define	MII_AUX_STATUS_REM_FAULT	0x0040
1511 #define	MII_AUX_STATUS_LP_ANEG_ABLE	0x0010
1512 #define	MII_AUX_STATUS_LP_NP_ABLE	0x0008
1513 
1514 #define	MII_AUX_STATUS_LINKUP		0x0004
1515 #define	MII_AUX_STATUS_RX_PAUSE		0x0002
1516 #define	MII_AUX_STATUS_TX_PAUSE		0x0001
1517 
1518 #define	MII_AUX_STATUS_SPEED_IND_5906	0x0008
1519 #define	MII_AUX_STATUS_NEG_ENABLED_5906		0x0002
1520 #define	MII_AUX_STATUS_DUPLEX_IND_5906		0x0001
1521 
1522 /*
1523  * Bits in the MII_INTR_STATUS and MII_INTR_MASK registers
1524  */
1525 #define	MII_INTR_RMT_RX_STATUS_CHANGE	0x0020
1526 #define	MII_INTR_LCL_RX_STATUS_CHANGE	0x0010
1527 #define	MII_INTR_LINK_DUPLEX_CHANGE	0x0008
1528 #define	MII_INTR_LINK_SPEED_CHANGE	0x0004
1529 #define	MII_INTR_LINK_STATUS_CHANGE	0x0002
1530 
1531 
1532 /*
1533  * Third section:
1534  * 	Hardware-defined data structures
1535  *
1536  * Note that the chip is naturally BIG-endian, so, for a big-endian
1537  * host, the structures defined below match those described in the PRM.
1538  * For little-endian hosts, some structures have to be swapped around.
1539  */
1540 
1541 #if	!defined(_BIG_ENDIAN) && !defined(_LITTLE_ENDIAN)
1542 #error	Host endianness not defined
1543 #endif
1544 
1545 /*
1546  * Architectural constants: absolute maximum numbers of each type of ring
1547  */
1548 #ifdef BGE_EXT_MEM
1549 #define	BGE_SEND_RINGS_MAX		16	/* only with ext mem	*/
1550 #else
1551 #define	BGE_SEND_RINGS_MAX		4
1552 #endif
1553 #define	BGE_SEND_RINGS_MAX_5705		1
1554 #define	BGE_RECV_RINGS_MAX		16
1555 #define	BGE_RECV_RINGS_MAX_5705		1
1556 #define	BGE_BUFF_RINGS_MAX		3	/* jumbo/std/mini (mini	*/
1557 						/* only with ext mem)	*/
1558 
1559 #define	BGE_SEND_SLOTS_MAX		512
1560 #define	BGE_STD_SLOTS_MAX		512
1561 #define	BGE_JUMBO_SLOTS_MAX		256
1562 #define	BGE_MINI_SLOTS_MAX		1024
1563 #define	BGE_RECV_SLOTS_MAX		2048
1564 #define	BGE_RECV_SLOTS_5705		512
1565 #define	BGE_RECV_SLOTS_5782		512
1566 #define	BGE_RECV_SLOTS_5721		512
1567 
1568 /*
1569  * Hardware-defined Ring Control Block
1570  */
1571 typedef struct {
1572 	uint64_t	host_ring_addr;
1573 #ifdef	_BIG_ENDIAN
1574 	uint16_t	max_len;
1575 	uint16_t	flags;
1576 	uint32_t	nic_ring_addr;
1577 #else
1578 	uint32_t	nic_ring_addr;
1579 	uint16_t	flags;
1580 	uint16_t	max_len;
1581 #endif	/* _BIG_ENDIAN */
1582 } bge_rcb_t;
1583 
1584 #define	RCB_FLAG_USE_EXT_RCV_BD		0x0001
1585 #define	RCB_FLAG_RING_DISABLED		0x0002
1586 
1587 /*
1588  * Hardware-defined Send Buffer Descriptor
1589  */
1590 typedef struct {
1591 	uint64_t	host_buf_addr;
1592 #ifdef	_BIG_ENDIAN
1593 	uint16_t	len;
1594 	uint16_t	flags;
1595 	uint16_t	reserved;
1596 	uint16_t	vlan_tci;
1597 #else
1598 	uint16_t	vlan_tci;
1599 	uint16_t	reserved;
1600 	uint16_t	flags;
1601 	uint16_t	len;
1602 #endif	/* _BIG_ENDIAN */
1603 } bge_sbd_t;
1604 
1605 #define	SBD_FLAG_TCP_UDP_CKSUM		0x0001
1606 #define	SBD_FLAG_IP_CKSUM		0x0002
1607 #define	SBD_FLAG_PACKET_END		0x0004
1608 #define	SBD_FLAG_IP_FRAG		0x0008
1609 #define	SBD_FLAG_IP_FRAG_END		0x0010
1610 
1611 #define	SBD_FLAG_VLAN_TAG		0x0040
1612 #define	SBD_FLAG_COAL_NOW		0x0080
1613 #define	SBD_FLAG_CPU_PRE_DMA		0x0100
1614 #define	SBD_FLAG_CPU_POST_DMA		0x0200
1615 
1616 #define	SBD_FLAG_INSERT_SRC_ADDR	0x1000
1617 #define	SBD_FLAG_CHOOSE_SRC_ADDR	0x6000
1618 #define	SBD_FLAG_DONT_GEN_CRC		0x8000
1619 
1620 /*
1621  * Hardware-defined Receive Buffer Descriptor
1622  */
1623 typedef struct {
1624 	uint64_t	host_buf_addr;
1625 #ifdef	_BIG_ENDIAN
1626 	uint16_t	index;
1627 	uint16_t	len;
1628 	uint16_t	type;
1629 	uint16_t	flags;
1630 	uint16_t	ip_cksum;
1631 	uint16_t	tcp_udp_cksum;
1632 	uint16_t	error_flag;
1633 	uint16_t	vlan_tci;
1634 	uint32_t	reserved;
1635 	uint32_t	opaque;
1636 #else
1637 	uint16_t	flags;
1638 	uint16_t	type;
1639 	uint16_t	len;
1640 	uint16_t	index;
1641 	uint16_t	vlan_tci;
1642 	uint16_t	error_flag;
1643 	uint16_t	tcp_udp_cksum;
1644 	uint16_t	ip_cksum;
1645 	uint32_t	opaque;
1646 	uint32_t	reserved;
1647 #endif	/* _BIG_ENDIAN */
1648 } bge_rbd_t;
1649 
1650 #define	RBD_FLAG_STD_RING		0x0000
1651 #define	RBD_FLAG_PACKET_END		0x0004
1652 
1653 #define	RBD_FLAG_JUMBO_RING		0x0020
1654 #define	RBD_FLAG_VLAN_TAG		0x0040
1655 
1656 #define	RBD_FLAG_FRAME_HAS_ERROR	0x0400
1657 #define	RBD_FLAG_MINI_RING		0x0800
1658 #define	RBD_FLAG_IP_CHECKSUM		0x1000
1659 #define	RBD_FLAG_TCP_UDP_CHECKSUM	0x2000
1660 #define	RBD_FLAG_TCP_UDP_IS_TCP		0x4000
1661 
1662 #define	RBD_FLAG_DEFAULT		0x0000
1663 
1664 #define	RBD_ERROR_BAD_CRC		0x00010000
1665 #define	RBD_ERROR_COLL_DETECT		0x00020000
1666 #define	RBD_ERROR_LINK_LOST		0x00040000
1667 #define	RBD_ERROR_PHY_DECODE_ERR	0x00080000
1668 #define	RBD_ERROR_ODD_NIBBLE_RX_MII	0x00100000
1669 #define	RBD_ERROR_MAC_ABORT		0x00200000
1670 #define	RBD_ERROR_LEN_LESS_64		0x00400000
1671 #define	RBD_ERROR_TRUNC_NO_RES		0x00800000
1672 #define	RBD_ERROR_GIANT_PKT_RCVD	0x01000000
1673 
1674 /*
1675  * Hardware-defined Status Block,Size of status block
1676  * is actually 0x50 bytes.Use 0x80 bytes for cache line
1677  * alignment.For BCM5705/5788/5721/5751/5752/5714
1678  * and 5715,there is only 1 recv and send ring index,but
1679  * driver defined 16 indexs here,please pay attention only
1680  * one ring is enabled in these chipsets.
1681  */
1682 typedef struct {
1683 	uint64_t	flags_n_tag;
1684 	uint16_t	buff_cons_index[4];
1685 	struct {
1686 #ifdef	_BIG_ENDIAN
1687 		uint16_t	send_cons_index;
1688 		uint16_t	recv_prod_index;
1689 #else
1690 		uint16_t	recv_prod_index;
1691 		uint16_t	send_cons_index;
1692 #endif	/* _BIG_ENDIAN */
1693 	} index[16];
1694 } bge_status_t;
1695 
1696 /*
1697  * Hardware-defined Receive BD Rule
1698  */
1699 typedef struct {
1700 	uint32_t	control;
1701 	uint32_t	mask_value;
1702 } bge_recv_rule_t;
1703 
1704 /*
1705  * This describes which sub-rule slots are used by a particular rule.
1706  */
1707 typedef struct {
1708 	int		start;
1709 	int		count;
1710 } bge_rule_info_t;
1711 
1712 /*
1713  * Indexes into the <buff_cons_index> array
1714  */
1715 #ifdef	_BIG_ENDIAN
1716 #define	STATUS_STD_BUFF_CONS_INDEX	0
1717 #define	STATUS_JUMBO_BUFF_CONS_INDEX	1
1718 #define	STATUS_MINI_BUFF_CONS_INDEX	3
1719 #define	SEND_INDEX_P(bsp, ring)	(&(bsp)->index[(ring)^0].send_cons_index)
1720 #define	RECV_INDEX_P(bsp, ring)	(&(bsp)->index[(ring)^0].recv_prod_index)
1721 #else
1722 #define	STATUS_STD_BUFF_CONS_INDEX	3
1723 #define	STATUS_JUMBO_BUFF_CONS_INDEX	2
1724 #define	STATUS_MINI_BUFF_CONS_INDEX	0
1725 #define	SEND_INDEX_P(bsp, ring)	(&(bsp)->index[(ring)^1].send_cons_index)
1726 #define	RECV_INDEX_P(bsp, ring)	(&(bsp)->index[(ring)^1].recv_prod_index)
1727 #endif	/* _BIG_ENDIAN */
1728 
1729 /*
1730  * Bits in the <flags_n_tag> word
1731  */
1732 #define	STATUS_FLAG_UPDATED		0x0000000100000000ull
1733 #define	STATUS_FLAG_LINK_CHANGED	0x0000000200000000ull
1734 #define	STATUS_FLAG_ERROR		0x0000000400000000ull
1735 #define	STATUS_TAG_MASK			0x00000000000000FFull
1736 
1737 /*
1738  * The tag from the status block is fed back to Interrupt Mailbox 0
1739  * (INTERRUPT_MBOX_0_REG, 0x0200) after servicing an interrupt.  This
1740  * lets the chip know what updates have been processed, so it can
1741  * reassert its interrupt if more updates have occurred since.
1742  *
1743  * These macros extract the tag from the <flags_n_tag> word, shift
1744  * it to the proper position in the Mailbox register, and provide
1745  * the complete values to write to INTERRUPT_MBOX_0_REG to disable
1746  * or enable interrupts
1747  */
1748 #define	STATUS_TAG(fnt)			((fnt) & STATUS_TAG_MASK)
1749 #define	INTERRUPT_TAG(fnt)		(STATUS_TAG(fnt) << 24)
1750 #define	INTERRUPT_MBOX_DISABLE(fnt)	(INTERRUPT_TAG(fnt) | 1)
1751 #define	INTERRUPT_MBOX_ENABLE(fnt)	(INTERRUPT_TAG(fnt) | 0)
1752 
1753 /*
1754  * Hardware-defined Statistics Block Offsets
1755  *
1756  * These are given in the manual as addresses in NIC memory, starting
1757  * from the NIC statistics area base address of 0x300; but here we
1758  * convert them into indexes into an array of (uint64_t)s, so we can
1759  * use them directly for accessing the copy of the statistics block
1760  * that the chip DMAs into main memory ...
1761  */
1762 
1763 #define	KS_BASE				0x300
1764 #define	KS_ADDR(x)			(((x)-KS_BASE)/sizeof (uint64_t))
1765 
1766 typedef enum {
1767 	KS_ifHCInOctets = KS_ADDR(0x400),
1768 	KS_etherStatsFragments = KS_ADDR(0x410),
1769 	KS_ifHCInUcastPkts,
1770 	KS_ifHCInMulticastPkts,
1771 	KS_ifHCInBroadcastPkts,
1772 	KS_dot3StatsFCSErrors,
1773 	KS_dot3StatsAlignmentErrors,
1774 	KS_xonPauseFramesReceived,
1775 	KS_xoffPauseFramesReceived,
1776 	KS_macControlFramesReceived,
1777 	KS_xoffStateEntered,
1778 	KS_dot3StatsFrameTooLongs,
1779 	KS_etherStatsJabbers,
1780 	KS_etherStatsUndersizePkts,
1781 	KS_inRangeLengthError,
1782 	KS_outRangeLengthError,
1783 	KS_etherStatsPkts64Octets,
1784 	KS_etherStatsPkts65to127Octets,
1785 	KS_etherStatsPkts128to255Octets,
1786 	KS_etherStatsPkts256to511Octets,
1787 	KS_etherStatsPkts512to1023Octets,
1788 	KS_etherStatsPkts1024to1518Octets,
1789 	KS_etherStatsPkts1519to2047Octets,
1790 	KS_etherStatsPkts2048to4095Octets,
1791 	KS_etherStatsPkts4096to8191Octets,
1792 	KS_etherStatsPkts8192to9022Octets,
1793 
1794 	KS_ifHCOutOctets = KS_ADDR(0x600),
1795 	KS_etherStatsCollisions = KS_ADDR(0x610),
1796 	KS_outXonSent,
1797 	KS_outXoffSent,
1798 	KS_flowControlDone,
1799 	KS_dot3StatsInternalMacTransmitErrors,
1800 	KS_dot3StatsSingleCollisionFrames,
1801 	KS_dot3StatsMultipleCollisionFrames,
1802 	KS_dot3StatsDeferredTransmissions,
1803 	KS_dot3StatsExcessiveCollisions = KS_ADDR(0x658),
1804 	KS_dot3StatsLateCollisions,
1805 	KS_dot3Collided2Times,
1806 	KS_dot3Collided3Times,
1807 	KS_dot3Collided4Times,
1808 	KS_dot3Collided5Times,
1809 	KS_dot3Collided6Times,
1810 	KS_dot3Collided7Times,
1811 	KS_dot3Collided8Times,
1812 	KS_dot3Collided9Times,
1813 	KS_dot3Collided10Times,
1814 	KS_dot3Collided11Times,
1815 	KS_dot3Collided12Times,
1816 	KS_dot3Collided13Times,
1817 	KS_dot3Collided14Times,
1818 	KS_dot3Collided15Times,
1819 	KS_ifHCOutUcastPkts,
1820 	KS_ifHCOutMulticastPkts,
1821 	KS_ifHCOutBroadcastPkts,
1822 	KS_dot3StatsCarrierSenseErrors,
1823 	KS_ifOutDiscards,
1824 	KS_ifOutErrors,
1825 
1826 	KS_COSIfHCInPkts_1 = KS_ADDR(0x800),		/* [16]	*/
1827 	KS_COSIfHCInPkts_2,
1828 	KS_COSIfHCInPkts_3,
1829 	KS_COSIfHCInPkts_4,
1830 	KS_COSIfHCInPkts_5,
1831 	KS_COSIfHCInPkts_6,
1832 	KS_COSIfHCInPkts_7,
1833 	KS_COSIfHCInPkts_8,
1834 	KS_COSIfHCInPkts_9,
1835 	KS_COSIfHCInPkts_10,
1836 	KS_COSIfHCInPkts_11,
1837 	KS_COSIfHCInPkts_12,
1838 	KS_COSIfHCInPkts_13,
1839 	KS_COSIfHCInPkts_14,
1840 	KS_COSIfHCInPkts_15,
1841 	KS_COSIfHCInPkts_16,
1842 	KS_COSFramesDroppedDueToFilters,
1843 	KS_nicDmaWriteQueueFull,
1844 	KS_nicDmaWriteHighPriQueueFull,
1845 	KS_nicNoMoreRxBDs,
1846 	KS_ifInDiscards,
1847 	KS_ifInErrors,
1848 	KS_nicRecvThresholdHit,
1849 
1850 	KS_COSIfHCOutPkts_1 = KS_ADDR(0x900),		/* [16]	*/
1851 	KS_COSIfHCOutPkts_2,
1852 	KS_COSIfHCOutPkts_3,
1853 	KS_COSIfHCOutPkts_4,
1854 	KS_COSIfHCOutPkts_5,
1855 	KS_COSIfHCOutPkts_6,
1856 	KS_COSIfHCOutPkts_7,
1857 	KS_COSIfHCOutPkts_8,
1858 	KS_COSIfHCOutPkts_9,
1859 	KS_COSIfHCOutPkts_10,
1860 	KS_COSIfHCOutPkts_11,
1861 	KS_COSIfHCOutPkts_12,
1862 	KS_COSIfHCOutPkts_13,
1863 	KS_COSIfHCOutPkts_14,
1864 	KS_COSIfHCOutPkts_15,
1865 	KS_COSIfHCOutPkts_16,
1866 	KS_nicDmaReadQueueFull,
1867 	KS_nicDmaReadHighPriQueueFull,
1868 	KS_nicSendDataCompQueueFull,
1869 	KS_nicRingSetSendProdIndex,
1870 	KS_nicRingStatusUpdate,
1871 	KS_nicInterrupts,
1872 	KS_nicAvoidedInterrupts,
1873 	KS_nicSendThresholdHit,
1874 
1875 	KS_STATS_SIZE = KS_ADDR(0xb00)
1876 } bge_stats_offset_t;
1877 
1878 /*
1879  * Hardware-defined Statistics Block
1880  *
1881  * Another view of the statistic block, as a array and a structure ...
1882  */
1883 
1884 typedef union {
1885 	uint64_t		a[KS_STATS_SIZE];
1886 	struct {
1887 		uint64_t	spare1[(0x400-0x300)/sizeof (uint64_t)];
1888 
1889 		uint64_t	ifHCInOctets;		/* 0x0400	*/
1890 		uint64_t	spare2[1];
1891 		uint64_t	etherStatsFragments;
1892 		uint64_t	ifHCInUcastPkts;
1893 		uint64_t	ifHCInMulticastPkts;
1894 		uint64_t	ifHCInBroadcastPkts;
1895 		uint64_t	dot3StatsFCSErrors;
1896 		uint64_t	dot3StatsAlignmentErrors;
1897 		uint64_t	xonPauseFramesReceived;
1898 		uint64_t	xoffPauseFramesReceived;
1899 		uint64_t	macControlFramesReceived;
1900 		uint64_t	xoffStateEntered;
1901 		uint64_t	dot3StatsFrameTooLongs;
1902 		uint64_t	etherStatsJabbers;
1903 		uint64_t	etherStatsUndersizePkts;
1904 		uint64_t	inRangeLengthError;
1905 		uint64_t	outRangeLengthError;
1906 		uint64_t	etherStatsPkts64Octets;
1907 		uint64_t	etherStatsPkts65to127Octets;
1908 		uint64_t	etherStatsPkts128to255Octets;
1909 		uint64_t	etherStatsPkts256to511Octets;
1910 		uint64_t	etherStatsPkts512to1023Octets;
1911 		uint64_t	etherStatsPkts1024to1518Octets;
1912 		uint64_t	etherStatsPkts1519to2047Octets;
1913 		uint64_t	etherStatsPkts2048to4095Octets;
1914 		uint64_t	etherStatsPkts4096to8191Octets;
1915 		uint64_t	etherStatsPkts8192to9022Octets;
1916 		uint64_t	spare3[(0x600-0x4d8)/sizeof (uint64_t)];
1917 
1918 		uint64_t	ifHCOutOctets;		/* 0x0600	*/
1919 		uint64_t	spare4[1];
1920 		uint64_t	etherStatsCollisions;
1921 		uint64_t	outXonSent;
1922 		uint64_t	outXoffSent;
1923 		uint64_t	flowControlDone;
1924 		uint64_t	dot3StatsInternalMacTransmitErrors;
1925 		uint64_t	dot3StatsSingleCollisionFrames;
1926 		uint64_t	dot3StatsMultipleCollisionFrames;
1927 		uint64_t	dot3StatsDeferredTransmissions;
1928 		uint64_t	spare5[1];
1929 		uint64_t	dot3StatsExcessiveCollisions;
1930 		uint64_t	dot3StatsLateCollisions;
1931 		uint64_t	dot3Collided2Times;
1932 		uint64_t	dot3Collided3Times;
1933 		uint64_t	dot3Collided4Times;
1934 		uint64_t	dot3Collided5Times;
1935 		uint64_t	dot3Collided6Times;
1936 		uint64_t	dot3Collided7Times;
1937 		uint64_t	dot3Collided8Times;
1938 		uint64_t	dot3Collided9Times;
1939 		uint64_t	dot3Collided10Times;
1940 		uint64_t	dot3Collided11Times;
1941 		uint64_t	dot3Collided12Times;
1942 		uint64_t	dot3Collided13Times;
1943 		uint64_t	dot3Collided14Times;
1944 		uint64_t	dot3Collided15Times;
1945 		uint64_t	ifHCOutUcastPkts;
1946 		uint64_t	ifHCOutMulticastPkts;
1947 		uint64_t	ifHCOutBroadcastPkts;
1948 		uint64_t	dot3StatsCarrierSenseErrors;
1949 		uint64_t	ifOutDiscards;
1950 		uint64_t	ifOutErrors;
1951 		uint64_t	spare6[(0x800-0x708)/sizeof (uint64_t)];
1952 
1953 		uint64_t	COSIfHCInPkts[16];	/* 0x0800	*/
1954 		uint64_t	COSFramesDroppedDueToFilters;
1955 		uint64_t	nicDmaWriteQueueFull;
1956 		uint64_t	nicDmaWriteHighPriQueueFull;
1957 		uint64_t	nicNoMoreRxBDs;
1958 		uint64_t	ifInDiscards;
1959 		uint64_t	ifInErrors;
1960 		uint64_t	nicRecvThresholdHit;
1961 		uint64_t	spare7[(0x900-0x8b8)/sizeof (uint64_t)];
1962 
1963 		uint64_t	COSIfHCOutPkts[16];	/* 0x0900	*/
1964 		uint64_t	nicDmaReadQueueFull;
1965 		uint64_t	nicDmaReadHighPriQueueFull;
1966 		uint64_t	nicSendDataCompQueueFull;
1967 		uint64_t	nicRingSetSendProdIndex;
1968 		uint64_t	nicRingStatusUpdate;
1969 		uint64_t	nicInterrupts;
1970 		uint64_t	nicAvoidedInterrupts;
1971 		uint64_t	nicSendThresholdHit;
1972 		uint64_t	spare8[(0xb00-0x9c0)/sizeof (uint64_t)];
1973 	} s;
1974 } bge_statistics_t;
1975 
1976 #define	KS_STAT_REG_SIZE	(0x1B)
1977 #define	KS_STAT_REG_BASE	(0x800)
1978 
1979 typedef struct {
1980 	uint32_t	ifHCOutOctets;
1981 	uint32_t	etherStatsCollisions;
1982 	uint32_t	outXonSent;
1983 	uint32_t	outXoffSent;
1984 	uint32_t	dot3StatsInternalMacTransmitErrors;
1985 	uint32_t	dot3StatsSingleCollisionFrames;
1986 	uint32_t	dot3StatsMultipleCollisionFrames;
1987 	uint32_t	dot3StatsDeferredTransmissions;
1988 	uint32_t	dot3StatsExcessiveCollisions;
1989 	uint32_t	dot3StatsLateCollisions;
1990 	uint32_t	ifHCOutUcastPkts;
1991 	uint32_t	ifHCOutMulticastPkts;
1992 	uint32_t	ifHCOutBroadcastPkts;
1993 	uint32_t	ifHCInOctets;
1994 	uint32_t	etherStatsFragments;
1995 	uint32_t	ifHCInUcastPkts;
1996 	uint32_t	ifHCInMulticastPkts;
1997 	uint32_t	ifHCInBroadcastPkts;
1998 	uint32_t	dot3StatsFCSErrors;
1999 	uint32_t	dot3StatsAlignmentErrors;
2000 	uint32_t	xonPauseFramesReceived;
2001 	uint32_t	xoffPauseFramesReceived;
2002 	uint32_t	macControlFramesReceived;
2003 	uint32_t	xoffStateEntered;
2004 	uint32_t	dot3StatsFrameTooLongs;
2005 	uint32_t	etherStatsJabbers;
2006 	uint32_t	etherStatsUndersizePkts;
2007 } bge_statistics_reg_t;
2008 
2009 
2010 #ifdef BGE_IPMI_ASF
2011 
2012 /*
2013  * Device internal memory entries
2014  */
2015 
2016 #define	BGE_FIRMWARE_MAILBOX				0x0b50
2017 #define	BGE_MAGIC_NUM_FIRMWARE_INIT_DONE		0x4b657654
2018 #define	BGE_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE	0x4861764b
2019 
2020 
2021 #define	BGE_NIC_DATA_SIG_ADDR			0x0b54
2022 #define	BGE_NIC_DATA_SIG			0x4b657654
2023 
2024 
2025 #define	BGE_NIC_DATA_NIC_CFG_ADDR		0x0b58
2026 
2027 #define	BGE_NIC_CFG_LED_MODE_TRIPLE_SPEED	0x000004
2028 #define	BGE_NIC_CFG_LED_MODE_LINK_SPEED		0x000008
2029 #define	BGE_NIC_CFG_LED_MODE_OPEN_DRAIN		0x000004
2030 #define	BGE_NIC_CFG_LED_MODE_OUTPUT		0x000008
2031 #define	BGE_NIC_CFG_LED_MODE_MASK		0x00000c
2032 
2033 #define	BGE_NIC_CFG_PHY_TYPE_UNKNOWN		0x000000
2034 #define	BGE_NIC_CFG_PHY_TYPE_COPPER		0x000010
2035 #define	BGE_NIC_CFG_PHY_TYPE_FIBER		0x000020
2036 #define	BGE_NIC_CFG_PHY_TYPE_MASK		0x000030
2037 
2038 #define	BGE_NIC_CFG_ENABLE_WOL			0x000040
2039 #define	BGE_NIC_CFG_ENABLE_ASF			0x000080
2040 #define	BGE_NIC_CFG_EEPROM_WP			0x000100
2041 #define	BGE_NIC_CFG_POWER_SAVING		0x000200
2042 #define	BGE_NIC_CFG_SWAP_PORT			0x000800
2043 #define	BGE_NIC_CFG_MINI_PCI			0x001000
2044 #define	BGE_NIC_CFG_FIBER_WOL_CAPABLE		0x004000
2045 #define	BGE_NIC_CFG_5753_12x12			0x100000
2046 
2047 
2048 #define	BGE_NIC_DATA_FIRMWARE_VERSION		0x0b5c
2049 
2050 
2051 #define	BGE_NIC_DATA_PHY_ID_ADDR		0x0b74
2052 #define	BGE_NIC_PHY_ID1_MASK			0xffff0000
2053 #define	BGE_NIC_PHY_ID2_MASK			0x0000ffff
2054 
2055 
2056 #define	BGE_CMD_MAILBOX				0x0b78
2057 #define	BGE_CMD_NICDRV_ALIVE			0x00000001
2058 #define	BGE_CMD_NICDRV_PAUSE_FW			0x00000002
2059 #define	BGE_CMD_NICDRV_IPV4ADDR_CHANGE		0x00000003
2060 #define	BGE_CMD_NICDRV_IPV6ADDR_CHANGE		0x00000004
2061 
2062 
2063 #define	BGE_CMD_LENGTH_MAILBOX			0x0b7c
2064 #define	BGE_CMD_DATA_MAILBOX			0x0b80
2065 #define	BGE_ASF_FW_STATUS_MAILBOX		0x0c00
2066 
2067 #define	BGE_DRV_STATE_MAILBOX			0x0c04
2068 #define	BGE_DRV_STATE_START			0x00000001
2069 #define	BGE_DRV_STATE_START_DONE		0x80000001
2070 #define	BGE_DRV_STATE_UNLOAD			0x00000002
2071 #define	BGE_DRV_STATE_UNLOAD_DONE		0x80000002
2072 #define	BGE_DRV_STATE_WOL			0x00000003
2073 #define	BGE_DRV_STATE_SUSPEND			0x00000004
2074 
2075 
2076 #define	BGE_FW_LAST_RESET_TYPE_MAILBOX		0x0c08
2077 #define	BGE_FW_LAST_RESET_TYPE_WARM		0x0001
2078 #define	BGE_FW_LAST_RESET_TYPE_COLD		0x0002
2079 
2080 
2081 #define	BGE_MAC_ADDR_HIGH_MAILBOX		0x0c14
2082 #define	BGE_MAC_ADDR_LOW_MAILBOX		0x0c18
2083 
2084 
2085 /*
2086  * RX-RISC event register
2087  */
2088 #define	RX_RISC_EVENT_REG			0x6810
2089 #define	RRER_ASF_EVENT				0x4000
2090 
2091 #endif /* BGE_IPMI_ASF */
2092 
2093 #ifdef __cplusplus
2094 }
2095 #endif
2096 
2097 #endif	/* _BGE_HW_H */
2098