xref: /titanic_44/usr/src/uts/common/inet/udp/udp.c (revision b4039a244b198b66f375ef24839eeaa718afd3bc)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 1991, 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 /* Copyright (c) 1990 Mentat Inc. */
25 
26 #include <sys/types.h>
27 #include <sys/stream.h>
28 #include <sys/stropts.h>
29 #include <sys/strlog.h>
30 #include <sys/strsun.h>
31 #define	_SUN_TPI_VERSION 2
32 #include <sys/tihdr.h>
33 #include <sys/timod.h>
34 #include <sys/ddi.h>
35 #include <sys/sunddi.h>
36 #include <sys/strsubr.h>
37 #include <sys/suntpi.h>
38 #include <sys/xti_inet.h>
39 #include <sys/kmem.h>
40 #include <sys/cred_impl.h>
41 #include <sys/policy.h>
42 #include <sys/priv.h>
43 #include <sys/ucred.h>
44 #include <sys/zone.h>
45 
46 #include <sys/socket.h>
47 #include <sys/socketvar.h>
48 #include <sys/sockio.h>
49 #include <sys/vtrace.h>
50 #include <sys/sdt.h>
51 #include <sys/debug.h>
52 #include <sys/isa_defs.h>
53 #include <sys/random.h>
54 #include <netinet/in.h>
55 #include <netinet/ip6.h>
56 #include <netinet/icmp6.h>
57 #include <netinet/udp.h>
58 
59 #include <inet/common.h>
60 #include <inet/ip.h>
61 #include <inet/ip_impl.h>
62 #include <inet/ipsec_impl.h>
63 #include <inet/ip6.h>
64 #include <inet/ip_ire.h>
65 #include <inet/ip_if.h>
66 #include <inet/ip_multi.h>
67 #include <inet/ip_ndp.h>
68 #include <inet/proto_set.h>
69 #include <inet/mib2.h>
70 #include <inet/optcom.h>
71 #include <inet/snmpcom.h>
72 #include <inet/kstatcom.h>
73 #include <inet/ipclassifier.h>
74 #include <sys/squeue_impl.h>
75 #include <inet/ipnet.h>
76 #include <sys/ethernet.h>
77 
78 #include <sys/tsol/label.h>
79 #include <sys/tsol/tnet.h>
80 #include <rpc/pmap_prot.h>
81 
82 #include <inet/udp_impl.h>
83 
84 /*
85  * Synchronization notes:
86  *
87  * UDP is MT and uses the usual kernel synchronization primitives. There are 2
88  * locks, the fanout lock (uf_lock) and conn_lock. conn_lock
89  * protects the contents of the udp_t. uf_lock protects the address and the
90  * fanout information.
91  * The lock order is conn_lock -> uf_lock.
92  *
93  * The fanout lock uf_lock:
94  * When a UDP endpoint is bound to a local port, it is inserted into
95  * a bind hash list.  The list consists of an array of udp_fanout_t buckets.
96  * The size of the array is controlled by the udp_bind_fanout_size variable.
97  * This variable can be changed in /etc/system if the default value is
98  * not large enough.  Each bind hash bucket is protected by a per bucket
99  * lock.  It protects the udp_bind_hash and udp_ptpbhn fields in the udp_t
100  * structure and a few other fields in the udp_t. A UDP endpoint is removed
101  * from the bind hash list only when it is being unbound or being closed.
102  * The per bucket lock also protects a UDP endpoint's state changes.
103  *
104  * Plumbing notes:
105  * UDP is always a device driver. For compatibility with mibopen() code
106  * it is possible to I_PUSH "udp", but that results in pushing a passthrough
107  * dummy module.
108  *
109  * The above implies that we don't support any intermediate module to
110  * reside in between /dev/ip and udp -- in fact, we never supported such
111  * scenario in the past as the inter-layer communication semantics have
112  * always been private.
113  */
114 
115 /* For /etc/system control */
116 uint_t udp_bind_fanout_size = UDP_BIND_FANOUT_SIZE;
117 
118 static void	udp_addr_req(queue_t *q, mblk_t *mp);
119 static void	udp_tpi_bind(queue_t *q, mblk_t *mp);
120 static void	udp_bind_hash_insert(udp_fanout_t *uf, udp_t *udp);
121 static void	udp_bind_hash_remove(udp_t *udp, boolean_t caller_holds_lock);
122 static int	udp_build_hdr_template(conn_t *, const in6_addr_t *,
123     const in6_addr_t *, in_port_t, uint32_t);
124 static void	udp_capability_req(queue_t *q, mblk_t *mp);
125 static int	udp_tpi_close(queue_t *q, int flags);
126 static void	udp_close_free(conn_t *);
127 static void	udp_tpi_connect(queue_t *q, mblk_t *mp);
128 static void	udp_tpi_disconnect(queue_t *q, mblk_t *mp);
129 static void	udp_err_ack(queue_t *q, mblk_t *mp, t_scalar_t t_error,
130     int sys_error);
131 static void	udp_err_ack_prim(queue_t *q, mblk_t *mp, t_scalar_t primitive,
132     t_scalar_t tlierr, int sys_error);
133 static int	udp_extra_priv_ports_get(queue_t *q, mblk_t *mp, caddr_t cp,
134 		    cred_t *cr);
135 static int	udp_extra_priv_ports_add(queue_t *q, mblk_t *mp,
136 		    char *value, caddr_t cp, cred_t *cr);
137 static int	udp_extra_priv_ports_del(queue_t *q, mblk_t *mp,
138 		    char *value, caddr_t cp, cred_t *cr);
139 static void	udp_icmp_input(void *, mblk_t *, void *, ip_recv_attr_t *);
140 static void	udp_icmp_error_ipv6(conn_t *connp, mblk_t *mp,
141     ip_recv_attr_t *ira);
142 static void	udp_info_req(queue_t *q, mblk_t *mp);
143 static void	udp_input(void *, mblk_t *, void *, ip_recv_attr_t *);
144 static void	udp_lrput(queue_t *, mblk_t *);
145 static void	udp_lwput(queue_t *, mblk_t *);
146 static int	udp_open(queue_t *q, dev_t *devp, int flag, int sflag,
147 		    cred_t *credp, boolean_t isv6);
148 static int	udp_openv4(queue_t *q, dev_t *devp, int flag, int sflag,
149 		    cred_t *credp);
150 static int	udp_openv6(queue_t *q, dev_t *devp, int flag, int sflag,
151 		    cred_t *credp);
152 static boolean_t udp_opt_allow_udr_set(t_scalar_t level, t_scalar_t name);
153 int		udp_opt_set(conn_t *connp, uint_t optset_context,
154 		    int level, int name, uint_t inlen,
155 		    uchar_t *invalp, uint_t *outlenp, uchar_t *outvalp,
156 		    void *thisdg_attrs, cred_t *cr);
157 int		udp_opt_get(conn_t *connp, int level, int name,
158 		    uchar_t *ptr);
159 static int	udp_output_connected(conn_t *connp, mblk_t *mp, cred_t *cr,
160 		    pid_t pid);
161 static int	udp_output_lastdst(conn_t *connp, mblk_t *mp, cred_t *cr,
162     pid_t pid, ip_xmit_attr_t *ixa);
163 static int	udp_output_newdst(conn_t *connp, mblk_t *data_mp, sin_t *sin,
164 		    sin6_t *sin6, ushort_t ipversion, cred_t *cr, pid_t,
165 		    ip_xmit_attr_t *ixa);
166 static mblk_t	*udp_prepend_hdr(conn_t *, ip_xmit_attr_t *, const ip_pkt_t *,
167     const in6_addr_t *, const in6_addr_t *, in_port_t, uint32_t, mblk_t *,
168     int *);
169 static mblk_t	*udp_prepend_header_template(conn_t *, ip_xmit_attr_t *,
170     mblk_t *, const in6_addr_t *, in_port_t, uint32_t, int *);
171 static void	udp_ud_err(queue_t *q, mblk_t *mp, t_scalar_t err);
172 static void	udp_ud_err_connected(conn_t *, t_scalar_t);
173 static void	udp_tpi_unbind(queue_t *q, mblk_t *mp);
174 static in_port_t udp_update_next_port(udp_t *udp, in_port_t port,
175     boolean_t random);
176 static void	udp_wput_other(queue_t *q, mblk_t *mp);
177 static void	udp_wput_iocdata(queue_t *q, mblk_t *mp);
178 static void	udp_wput_fallback(queue_t *q, mblk_t *mp);
179 static size_t	udp_set_rcv_hiwat(udp_t *udp, size_t size);
180 
181 static void	*udp_stack_init(netstackid_t stackid, netstack_t *ns);
182 static void	udp_stack_fini(netstackid_t stackid, void *arg);
183 
184 static void	*udp_kstat_init(netstackid_t stackid);
185 static void	udp_kstat_fini(netstackid_t stackid, kstat_t *ksp);
186 static void	*udp_kstat2_init(netstackid_t, udp_stat_t *);
187 static void	udp_kstat2_fini(netstackid_t, kstat_t *);
188 static int	udp_kstat_update(kstat_t *kp, int rw);
189 
190 
191 /* Common routines for TPI and socket module */
192 static void	udp_ulp_recv(conn_t *, mblk_t *, uint_t, ip_recv_attr_t *);
193 
194 /* Common routine for TPI and socket module */
195 static conn_t	*udp_do_open(cred_t *, boolean_t, int, int *);
196 static void	udp_do_close(conn_t *);
197 static int	udp_do_bind(conn_t *, struct sockaddr *, socklen_t, cred_t *,
198     boolean_t);
199 static int	udp_do_unbind(conn_t *);
200 
201 int		udp_getsockname(sock_lower_handle_t,
202     struct sockaddr *, socklen_t *, cred_t *);
203 int		udp_getpeername(sock_lower_handle_t,
204     struct sockaddr *, socklen_t *, cred_t *);
205 static int	udp_do_connect(conn_t *, const struct sockaddr *, socklen_t,
206     cred_t *, pid_t);
207 
208 #pragma inline(udp_output_connected, udp_output_newdst, udp_output_lastdst)
209 
210 /*
211  * Checks if the given destination addr/port is allowed out.
212  * If allowed, registers the (dest_addr/port, node_ID) mapping at Cluster.
213  * Called for each connect() and for sendto()/sendmsg() to a different
214  * destination.
215  * For connect(), called in udp_connect().
216  * For sendto()/sendmsg(), called in udp_output_newdst().
217  *
218  * This macro assumes that the cl_inet_connect2 hook is not NULL.
219  * Please check this before calling this macro.
220  *
221  * void
222  * CL_INET_UDP_CONNECT(conn_t cp, udp_t *udp, boolean_t is_outgoing,
223  *     in6_addr_t *faddrp, in_port_t (or uint16_t) fport, int err);
224  */
225 #define	CL_INET_UDP_CONNECT(cp, is_outgoing, faddrp, fport, err) {	\
226 	(err) = 0;							\
227 	/*								\
228 	 * Running in cluster mode - check and register active		\
229 	 * "connection" information					\
230 	 */								\
231 	if ((cp)->conn_ipversion == IPV4_VERSION)			\
232 		(err) = (*cl_inet_connect2)(				\
233 		    (cp)->conn_netstack->netstack_stackid,		\
234 		    IPPROTO_UDP, is_outgoing, AF_INET,			\
235 		    (uint8_t *)&((cp)->conn_laddr_v4),			\
236 		    (cp)->conn_lport,					\
237 		    (uint8_t *)&(V4_PART_OF_V6(*faddrp)),		\
238 		    (in_port_t)(fport), NULL);				\
239 	else								\
240 		(err) = (*cl_inet_connect2)(				\
241 		    (cp)->conn_netstack->netstack_stackid,		\
242 		    IPPROTO_UDP, is_outgoing, AF_INET6,			\
243 		    (uint8_t *)&((cp)->conn_laddr_v6),			\
244 		    (cp)->conn_lport,					\
245 		    (uint8_t *)(faddrp), (in_port_t)(fport), NULL);	\
246 }
247 
248 static struct module_info udp_mod_info =  {
249 	UDP_MOD_ID, UDP_MOD_NAME, 1, INFPSZ, UDP_RECV_HIWATER, UDP_RECV_LOWATER
250 };
251 
252 /*
253  * Entry points for UDP as a device.
254  * We have separate open functions for the /dev/udp and /dev/udp6 devices.
255  */
256 static struct qinit udp_rinitv4 = {
257 	NULL, NULL, udp_openv4, udp_tpi_close, NULL, &udp_mod_info, NULL
258 };
259 
260 static struct qinit udp_rinitv6 = {
261 	NULL, NULL, udp_openv6, udp_tpi_close, NULL, &udp_mod_info, NULL
262 };
263 
264 static struct qinit udp_winit = {
265 	(pfi_t)udp_wput, (pfi_t)ip_wsrv, NULL, NULL, NULL, &udp_mod_info
266 };
267 
268 /* UDP entry point during fallback */
269 struct qinit udp_fallback_sock_winit = {
270 	(pfi_t)udp_wput_fallback, NULL, NULL, NULL, NULL, &udp_mod_info
271 };
272 
273 /*
274  * UDP needs to handle I_LINK and I_PLINK since ifconfig
275  * likes to use it as a place to hang the various streams.
276  */
277 static struct qinit udp_lrinit = {
278 	(pfi_t)udp_lrput, NULL, udp_openv4, udp_tpi_close, NULL, &udp_mod_info
279 };
280 
281 static struct qinit udp_lwinit = {
282 	(pfi_t)udp_lwput, NULL, udp_openv4, udp_tpi_close, NULL, &udp_mod_info
283 };
284 
285 /* For AF_INET aka /dev/udp */
286 struct streamtab udpinfov4 = {
287 	&udp_rinitv4, &udp_winit, &udp_lrinit, &udp_lwinit
288 };
289 
290 /* For AF_INET6 aka /dev/udp6 */
291 struct streamtab udpinfov6 = {
292 	&udp_rinitv6, &udp_winit, &udp_lrinit, &udp_lwinit
293 };
294 
295 #define	UDP_MAXPACKET_IPV4 (IP_MAXPACKET - UDPH_SIZE - IP_SIMPLE_HDR_LENGTH)
296 
297 /* Default structure copied into T_INFO_ACK messages */
298 static struct T_info_ack udp_g_t_info_ack_ipv4 = {
299 	T_INFO_ACK,
300 	UDP_MAXPACKET_IPV4,	/* TSDU_size. Excl. headers */
301 	T_INVALID,	/* ETSU_size.  udp does not support expedited data. */
302 	T_INVALID,	/* CDATA_size. udp does not support connect data. */
303 	T_INVALID,	/* DDATA_size. udp does not support disconnect data. */
304 	sizeof (sin_t),	/* ADDR_size. */
305 	0,		/* OPT_size - not initialized here */
306 	UDP_MAXPACKET_IPV4,	/* TIDU_size.  Excl. headers */
307 	T_CLTS,		/* SERV_type.  udp supports connection-less. */
308 	TS_UNBND,	/* CURRENT_state.  This is set from udp_state. */
309 	(XPG4_1|SENDZERO) /* PROVIDER_flag */
310 };
311 
312 #define	UDP_MAXPACKET_IPV6 (IP_MAXPACKET - UDPH_SIZE - IPV6_HDR_LEN)
313 
314 static	struct T_info_ack udp_g_t_info_ack_ipv6 = {
315 	T_INFO_ACK,
316 	UDP_MAXPACKET_IPV6,	/* TSDU_size.  Excl. headers */
317 	T_INVALID,	/* ETSU_size.  udp does not support expedited data. */
318 	T_INVALID,	/* CDATA_size. udp does not support connect data. */
319 	T_INVALID,	/* DDATA_size. udp does not support disconnect data. */
320 	sizeof (sin6_t), /* ADDR_size. */
321 	0,		/* OPT_size - not initialized here */
322 	UDP_MAXPACKET_IPV6,	/* TIDU_size. Excl. headers */
323 	T_CLTS,		/* SERV_type.  udp supports connection-less. */
324 	TS_UNBND,	/* CURRENT_state.  This is set from udp_state. */
325 	(XPG4_1|SENDZERO) /* PROVIDER_flag */
326 };
327 
328 /*
329  * UDP tunables related declarations. Definitions are in udp_tunables.c
330  */
331 extern mod_prop_info_t udp_propinfo_tbl[];
332 extern int udp_propinfo_count;
333 
334 /* Setable in /etc/system */
335 /* If set to 0, pick ephemeral port sequentially; otherwise randomly. */
336 uint32_t udp_random_anon_port = 1;
337 
338 /*
339  * Hook functions to enable cluster networking.
340  * On non-clustered systems these vectors must always be NULL
341  */
342 
343 void (*cl_inet_bind)(netstackid_t stack_id, uchar_t protocol,
344     sa_family_t addr_family, uint8_t *laddrp, in_port_t lport,
345     void *args) = NULL;
346 void (*cl_inet_unbind)(netstackid_t stack_id, uint8_t protocol,
347     sa_family_t addr_family, uint8_t *laddrp, in_port_t lport,
348     void *args) = NULL;
349 
350 typedef union T_primitives *t_primp_t;
351 
352 /*
353  * Return the next anonymous port in the privileged port range for
354  * bind checking.
355  *
356  * Trusted Extension (TX) notes: TX allows administrator to mark or
357  * reserve ports as Multilevel ports (MLP). MLP has special function
358  * on TX systems. Once a port is made MLP, it's not available as
359  * ordinary port. This creates "holes" in the port name space. It
360  * may be necessary to skip the "holes" find a suitable anon port.
361  */
362 static in_port_t
363 udp_get_next_priv_port(udp_t *udp)
364 {
365 	static in_port_t next_priv_port = IPPORT_RESERVED - 1;
366 	in_port_t nextport;
367 	boolean_t restart = B_FALSE;
368 	udp_stack_t *us = udp->udp_us;
369 
370 retry:
371 	if (next_priv_port < us->us_min_anonpriv_port ||
372 	    next_priv_port >= IPPORT_RESERVED) {
373 		next_priv_port = IPPORT_RESERVED - 1;
374 		if (restart)
375 			return (0);
376 		restart = B_TRUE;
377 	}
378 
379 	if (is_system_labeled() &&
380 	    (nextport = tsol_next_port(crgetzone(udp->udp_connp->conn_cred),
381 	    next_priv_port, IPPROTO_UDP, B_FALSE)) != 0) {
382 		next_priv_port = nextport;
383 		goto retry;
384 	}
385 
386 	return (next_priv_port--);
387 }
388 
389 /*
390  * Hash list removal routine for udp_t structures.
391  */
392 static void
393 udp_bind_hash_remove(udp_t *udp, boolean_t caller_holds_lock)
394 {
395 	udp_t		*udpnext;
396 	kmutex_t	*lockp;
397 	udp_stack_t	*us = udp->udp_us;
398 	conn_t		*connp = udp->udp_connp;
399 
400 	if (udp->udp_ptpbhn == NULL)
401 		return;
402 
403 	/*
404 	 * Extract the lock pointer in case there are concurrent
405 	 * hash_remove's for this instance.
406 	 */
407 	ASSERT(connp->conn_lport != 0);
408 	if (!caller_holds_lock) {
409 		lockp = &us->us_bind_fanout[UDP_BIND_HASH(connp->conn_lport,
410 		    us->us_bind_fanout_size)].uf_lock;
411 		ASSERT(lockp != NULL);
412 		mutex_enter(lockp);
413 	}
414 	if (udp->udp_ptpbhn != NULL) {
415 		udpnext = udp->udp_bind_hash;
416 		if (udpnext != NULL) {
417 			udpnext->udp_ptpbhn = udp->udp_ptpbhn;
418 			udp->udp_bind_hash = NULL;
419 		}
420 		*udp->udp_ptpbhn = udpnext;
421 		udp->udp_ptpbhn = NULL;
422 	}
423 	if (!caller_holds_lock) {
424 		mutex_exit(lockp);
425 	}
426 }
427 
428 static void
429 udp_bind_hash_insert(udp_fanout_t *uf, udp_t *udp)
430 {
431 	conn_t	*connp = udp->udp_connp;
432 	udp_t	**udpp;
433 	udp_t	*udpnext;
434 	conn_t	*connext;
435 
436 	ASSERT(MUTEX_HELD(&uf->uf_lock));
437 	ASSERT(udp->udp_ptpbhn == NULL);
438 	udpp = &uf->uf_udp;
439 	udpnext = udpp[0];
440 	if (udpnext != NULL) {
441 		/*
442 		 * If the new udp bound to the INADDR_ANY address
443 		 * and the first one in the list is not bound to
444 		 * INADDR_ANY we skip all entries until we find the
445 		 * first one bound to INADDR_ANY.
446 		 * This makes sure that applications binding to a
447 		 * specific address get preference over those binding to
448 		 * INADDR_ANY.
449 		 */
450 		connext = udpnext->udp_connp;
451 		if (V6_OR_V4_INADDR_ANY(connp->conn_bound_addr_v6) &&
452 		    !V6_OR_V4_INADDR_ANY(connext->conn_bound_addr_v6)) {
453 			while ((udpnext = udpp[0]) != NULL &&
454 			    !V6_OR_V4_INADDR_ANY(connext->conn_bound_addr_v6)) {
455 				udpp = &(udpnext->udp_bind_hash);
456 			}
457 			if (udpnext != NULL)
458 				udpnext->udp_ptpbhn = &udp->udp_bind_hash;
459 		} else {
460 			udpnext->udp_ptpbhn = &udp->udp_bind_hash;
461 		}
462 	}
463 	udp->udp_bind_hash = udpnext;
464 	udp->udp_ptpbhn = udpp;
465 	udpp[0] = udp;
466 }
467 
468 /*
469  * This routine is called to handle each O_T_BIND_REQ/T_BIND_REQ message
470  * passed to udp_wput.
471  * It associates a port number and local address with the stream.
472  * It calls IP to verify the local IP address, and calls IP to insert
473  * the conn_t in the fanout table.
474  * If everything is ok it then sends the T_BIND_ACK back up.
475  *
476  * Note that UDP over IPv4 and IPv6 sockets can use the same port number
477  * without setting SO_REUSEADDR. This is needed so that they
478  * can be viewed as two independent transport protocols.
479  * However, anonymouns ports are allocated from the same range to avoid
480  * duplicating the us->us_next_port_to_try.
481  */
482 static void
483 udp_tpi_bind(queue_t *q, mblk_t *mp)
484 {
485 	sin_t		*sin;
486 	sin6_t		*sin6;
487 	mblk_t		*mp1;
488 	struct T_bind_req *tbr;
489 	conn_t		*connp;
490 	udp_t		*udp;
491 	int		error;
492 	struct sockaddr	*sa;
493 	cred_t		*cr;
494 
495 	/*
496 	 * All Solaris components should pass a db_credp
497 	 * for this TPI message, hence we ASSERT.
498 	 * But in case there is some other M_PROTO that looks
499 	 * like a TPI message sent by some other kernel
500 	 * component, we check and return an error.
501 	 */
502 	cr = msg_getcred(mp, NULL);
503 	ASSERT(cr != NULL);
504 	if (cr == NULL) {
505 		udp_err_ack(q, mp, TSYSERR, EINVAL);
506 		return;
507 	}
508 
509 	connp = Q_TO_CONN(q);
510 	udp = connp->conn_udp;
511 	if ((mp->b_wptr - mp->b_rptr) < sizeof (*tbr)) {
512 		(void) mi_strlog(q, 1, SL_ERROR|SL_TRACE,
513 		    "udp_bind: bad req, len %u",
514 		    (uint_t)(mp->b_wptr - mp->b_rptr));
515 		udp_err_ack(q, mp, TPROTO, 0);
516 		return;
517 	}
518 	if (udp->udp_state != TS_UNBND) {
519 		(void) mi_strlog(q, 1, SL_ERROR|SL_TRACE,
520 		    "udp_bind: bad state, %u", udp->udp_state);
521 		udp_err_ack(q, mp, TOUTSTATE, 0);
522 		return;
523 	}
524 	/*
525 	 * Reallocate the message to make sure we have enough room for an
526 	 * address.
527 	 */
528 	mp1 = reallocb(mp, sizeof (struct T_bind_ack) + sizeof (sin6_t), 1);
529 	if (mp1 == NULL) {
530 		udp_err_ack(q, mp, TSYSERR, ENOMEM);
531 		return;
532 	}
533 
534 	mp = mp1;
535 
536 	/* Reset the message type in preparation for shipping it back. */
537 	DB_TYPE(mp) = M_PCPROTO;
538 
539 	tbr = (struct T_bind_req *)mp->b_rptr;
540 	switch (tbr->ADDR_length) {
541 	case 0:			/* Request for a generic port */
542 		tbr->ADDR_offset = sizeof (struct T_bind_req);
543 		if (connp->conn_family == AF_INET) {
544 			tbr->ADDR_length = sizeof (sin_t);
545 			sin = (sin_t *)&tbr[1];
546 			*sin = sin_null;
547 			sin->sin_family = AF_INET;
548 			mp->b_wptr = (uchar_t *)&sin[1];
549 			sa = (struct sockaddr *)sin;
550 		} else {
551 			ASSERT(connp->conn_family == AF_INET6);
552 			tbr->ADDR_length = sizeof (sin6_t);
553 			sin6 = (sin6_t *)&tbr[1];
554 			*sin6 = sin6_null;
555 			sin6->sin6_family = AF_INET6;
556 			mp->b_wptr = (uchar_t *)&sin6[1];
557 			sa = (struct sockaddr *)sin6;
558 		}
559 		break;
560 
561 	case sizeof (sin_t):	/* Complete IPv4 address */
562 		sa = (struct sockaddr *)mi_offset_param(mp, tbr->ADDR_offset,
563 		    sizeof (sin_t));
564 		if (sa == NULL || !OK_32PTR((char *)sa)) {
565 			udp_err_ack(q, mp, TSYSERR, EINVAL);
566 			return;
567 		}
568 		if (connp->conn_family != AF_INET ||
569 		    sa->sa_family != AF_INET) {
570 			udp_err_ack(q, mp, TSYSERR, EAFNOSUPPORT);
571 			return;
572 		}
573 		break;
574 
575 	case sizeof (sin6_t):	/* complete IPv6 address */
576 		sa = (struct sockaddr *)mi_offset_param(mp, tbr->ADDR_offset,
577 		    sizeof (sin6_t));
578 		if (sa == NULL || !OK_32PTR((char *)sa)) {
579 			udp_err_ack(q, mp, TSYSERR, EINVAL);
580 			return;
581 		}
582 		if (connp->conn_family != AF_INET6 ||
583 		    sa->sa_family != AF_INET6) {
584 			udp_err_ack(q, mp, TSYSERR, EAFNOSUPPORT);
585 			return;
586 		}
587 		break;
588 
589 	default:		/* Invalid request */
590 		(void) mi_strlog(q, 1, SL_ERROR|SL_TRACE,
591 		    "udp_bind: bad ADDR_length length %u", tbr->ADDR_length);
592 		udp_err_ack(q, mp, TBADADDR, 0);
593 		return;
594 	}
595 
596 	error = udp_do_bind(connp, sa, tbr->ADDR_length, cr,
597 	    tbr->PRIM_type != O_T_BIND_REQ);
598 
599 	if (error != 0) {
600 		if (error > 0) {
601 			udp_err_ack(q, mp, TSYSERR, error);
602 		} else {
603 			udp_err_ack(q, mp, -error, 0);
604 		}
605 	} else {
606 		tbr->PRIM_type = T_BIND_ACK;
607 		qreply(q, mp);
608 	}
609 }
610 
611 /*
612  * This routine handles each T_CONN_REQ message passed to udp.  It
613  * associates a default destination address with the stream.
614  *
615  * After various error checks are completed, udp_connect() lays
616  * the target address and port into the composite header template.
617  * Then we ask IP for information, including a source address if we didn't
618  * already have one. Finally we send up the T_OK_ACK reply message.
619  */
620 static void
621 udp_tpi_connect(queue_t *q, mblk_t *mp)
622 {
623 	conn_t	*connp = Q_TO_CONN(q);
624 	int	error;
625 	socklen_t	len;
626 	struct sockaddr		*sa;
627 	struct T_conn_req	*tcr;
628 	cred_t		*cr;
629 	pid_t		pid;
630 	/*
631 	 * All Solaris components should pass a db_credp
632 	 * for this TPI message, hence we ASSERT.
633 	 * But in case there is some other M_PROTO that looks
634 	 * like a TPI message sent by some other kernel
635 	 * component, we check and return an error.
636 	 */
637 	cr = msg_getcred(mp, &pid);
638 	ASSERT(cr != NULL);
639 	if (cr == NULL) {
640 		udp_err_ack(q, mp, TSYSERR, EINVAL);
641 		return;
642 	}
643 
644 	tcr = (struct T_conn_req *)mp->b_rptr;
645 
646 	/* A bit of sanity checking */
647 	if ((mp->b_wptr - mp->b_rptr) < sizeof (struct T_conn_req)) {
648 		udp_err_ack(q, mp, TPROTO, 0);
649 		return;
650 	}
651 
652 	if (tcr->OPT_length != 0) {
653 		udp_err_ack(q, mp, TBADOPT, 0);
654 		return;
655 	}
656 
657 	/*
658 	 * Determine packet type based on type of address passed in
659 	 * the request should contain an IPv4 or IPv6 address.
660 	 * Make sure that address family matches the type of
661 	 * family of the address passed down.
662 	 */
663 	len = tcr->DEST_length;
664 	switch (tcr->DEST_length) {
665 	default:
666 		udp_err_ack(q, mp, TBADADDR, 0);
667 		return;
668 
669 	case sizeof (sin_t):
670 		sa = (struct sockaddr *)mi_offset_param(mp, tcr->DEST_offset,
671 		    sizeof (sin_t));
672 		break;
673 
674 	case sizeof (sin6_t):
675 		sa = (struct sockaddr *)mi_offset_param(mp, tcr->DEST_offset,
676 		    sizeof (sin6_t));
677 		break;
678 	}
679 
680 	error = proto_verify_ip_addr(connp->conn_family, sa, len);
681 	if (error != 0) {
682 		udp_err_ack(q, mp, TSYSERR, error);
683 		return;
684 	}
685 
686 	error = udp_do_connect(connp, sa, len, cr, pid);
687 	if (error != 0) {
688 		if (error < 0)
689 			udp_err_ack(q, mp, -error, 0);
690 		else
691 			udp_err_ack(q, mp, TSYSERR, error);
692 	} else {
693 		mblk_t	*mp1;
694 		/*
695 		 * We have to send a connection confirmation to
696 		 * keep TLI happy.
697 		 */
698 		if (connp->conn_family == AF_INET) {
699 			mp1 = mi_tpi_conn_con(NULL, (char *)sa,
700 			    sizeof (sin_t), NULL, 0);
701 		} else {
702 			mp1 = mi_tpi_conn_con(NULL, (char *)sa,
703 			    sizeof (sin6_t), NULL, 0);
704 		}
705 		if (mp1 == NULL) {
706 			udp_err_ack(q, mp, TSYSERR, ENOMEM);
707 			return;
708 		}
709 
710 		/*
711 		 * Send ok_ack for T_CONN_REQ
712 		 */
713 		mp = mi_tpi_ok_ack_alloc(mp);
714 		if (mp == NULL) {
715 			/* Unable to reuse the T_CONN_REQ for the ack. */
716 			udp_err_ack_prim(q, mp1, T_CONN_REQ, TSYSERR, ENOMEM);
717 			return;
718 		}
719 
720 		putnext(connp->conn_rq, mp);
721 		putnext(connp->conn_rq, mp1);
722 	}
723 }
724 
725 static int
726 udp_tpi_close(queue_t *q, int flags)
727 {
728 	conn_t	*connp;
729 
730 	if (flags & SO_FALLBACK) {
731 		/*
732 		 * stream is being closed while in fallback
733 		 * simply free the resources that were allocated
734 		 */
735 		inet_minor_free(WR(q)->q_ptr, (dev_t)(RD(q)->q_ptr));
736 		qprocsoff(q);
737 		goto done;
738 	}
739 
740 	connp = Q_TO_CONN(q);
741 	udp_do_close(connp);
742 done:
743 	q->q_ptr = WR(q)->q_ptr = NULL;
744 	return (0);
745 }
746 
747 static void
748 udp_close_free(conn_t *connp)
749 {
750 	udp_t *udp = connp->conn_udp;
751 
752 	/* If there are any options associated with the stream, free them. */
753 	if (udp->udp_recv_ipp.ipp_fields != 0)
754 		ip_pkt_free(&udp->udp_recv_ipp);
755 
756 	/*
757 	 * Clear any fields which the kmem_cache constructor clears.
758 	 * Only udp_connp needs to be preserved.
759 	 * TBD: We should make this more efficient to avoid clearing
760 	 * everything.
761 	 */
762 	ASSERT(udp->udp_connp == connp);
763 	bzero(udp, sizeof (udp_t));
764 	udp->udp_connp = connp;
765 }
766 
767 static int
768 udp_do_disconnect(conn_t *connp)
769 {
770 	udp_t	*udp;
771 	udp_fanout_t *udpf;
772 	udp_stack_t *us;
773 	int	error;
774 
775 	udp = connp->conn_udp;
776 	us = udp->udp_us;
777 	mutex_enter(&connp->conn_lock);
778 	if (udp->udp_state != TS_DATA_XFER) {
779 		mutex_exit(&connp->conn_lock);
780 		return (-TOUTSTATE);
781 	}
782 	udpf = &us->us_bind_fanout[UDP_BIND_HASH(connp->conn_lport,
783 	    us->us_bind_fanout_size)];
784 	mutex_enter(&udpf->uf_lock);
785 	if (connp->conn_mcbc_bind)
786 		connp->conn_saddr_v6 = ipv6_all_zeros;
787 	else
788 		connp->conn_saddr_v6 = connp->conn_bound_addr_v6;
789 	connp->conn_laddr_v6 = connp->conn_bound_addr_v6;
790 	connp->conn_faddr_v6 = ipv6_all_zeros;
791 	connp->conn_fport = 0;
792 	udp->udp_state = TS_IDLE;
793 	mutex_exit(&udpf->uf_lock);
794 
795 	/* Remove any remnants of mapped address binding */
796 	if (connp->conn_family == AF_INET6)
797 		connp->conn_ipversion = IPV6_VERSION;
798 
799 	connp->conn_v6lastdst = ipv6_all_zeros;
800 	error = udp_build_hdr_template(connp, &connp->conn_saddr_v6,
801 	    &connp->conn_faddr_v6, connp->conn_fport, connp->conn_flowinfo);
802 	mutex_exit(&connp->conn_lock);
803 	if (error != 0)
804 		return (error);
805 
806 	/*
807 	 * Tell IP to remove the full binding and revert
808 	 * to the local address binding.
809 	 */
810 	return (ip_laddr_fanout_insert(connp));
811 }
812 
813 static void
814 udp_tpi_disconnect(queue_t *q, mblk_t *mp)
815 {
816 	conn_t	*connp = Q_TO_CONN(q);
817 	int	error;
818 
819 	/*
820 	 * Allocate the largest primitive we need to send back
821 	 * T_error_ack is > than T_ok_ack
822 	 */
823 	mp = reallocb(mp, sizeof (struct T_error_ack), 1);
824 	if (mp == NULL) {
825 		/* Unable to reuse the T_DISCON_REQ for the ack. */
826 		udp_err_ack_prim(q, mp, T_DISCON_REQ, TSYSERR, ENOMEM);
827 		return;
828 	}
829 
830 	error = udp_do_disconnect(connp);
831 
832 	if (error != 0) {
833 		if (error < 0) {
834 			udp_err_ack(q, mp, -error, 0);
835 		} else {
836 			udp_err_ack(q, mp, TSYSERR, error);
837 		}
838 	} else {
839 		mp = mi_tpi_ok_ack_alloc(mp);
840 		ASSERT(mp != NULL);
841 		qreply(q, mp);
842 	}
843 }
844 
845 int
846 udp_disconnect(conn_t *connp)
847 {
848 	int error;
849 
850 	connp->conn_dgram_errind = B_FALSE;
851 	error = udp_do_disconnect(connp);
852 	if (error < 0)
853 		error = proto_tlitosyserr(-error);
854 
855 	return (error);
856 }
857 
858 /* This routine creates a T_ERROR_ACK message and passes it upstream. */
859 static void
860 udp_err_ack(queue_t *q, mblk_t *mp, t_scalar_t t_error, int sys_error)
861 {
862 	if ((mp = mi_tpi_err_ack_alloc(mp, t_error, sys_error)) != NULL)
863 		qreply(q, mp);
864 }
865 
866 /* Shorthand to generate and send TPI error acks to our client */
867 static void
868 udp_err_ack_prim(queue_t *q, mblk_t *mp, t_scalar_t primitive,
869     t_scalar_t t_error, int sys_error)
870 {
871 	struct T_error_ack	*teackp;
872 
873 	if ((mp = tpi_ack_alloc(mp, sizeof (struct T_error_ack),
874 	    M_PCPROTO, T_ERROR_ACK)) != NULL) {
875 		teackp = (struct T_error_ack *)mp->b_rptr;
876 		teackp->ERROR_prim = primitive;
877 		teackp->TLI_error = t_error;
878 		teackp->UNIX_error = sys_error;
879 		qreply(q, mp);
880 	}
881 }
882 
883 /* At minimum we need 4 bytes of UDP header */
884 #define	ICMP_MIN_UDP_HDR	4
885 
886 /*
887  * udp_icmp_input is called as conn_recvicmp to process ICMP messages.
888  * Generates the appropriate T_UDERROR_IND for permanent (non-transient) errors.
889  * Assumes that IP has pulled up everything up to and including the ICMP header.
890  */
891 /* ARGSUSED2 */
892 static void
893 udp_icmp_input(void *arg1, mblk_t *mp, void *arg2, ip_recv_attr_t *ira)
894 {
895 	conn_t		*connp = (conn_t *)arg1;
896 	icmph_t		*icmph;
897 	ipha_t		*ipha;
898 	int		iph_hdr_length;
899 	udpha_t		*udpha;
900 	sin_t		sin;
901 	sin6_t		sin6;
902 	mblk_t		*mp1;
903 	int		error = 0;
904 	udp_t		*udp = connp->conn_udp;
905 
906 	ipha = (ipha_t *)mp->b_rptr;
907 
908 	ASSERT(OK_32PTR(mp->b_rptr));
909 
910 	if (IPH_HDR_VERSION(ipha) != IPV4_VERSION) {
911 		ASSERT(IPH_HDR_VERSION(ipha) == IPV6_VERSION);
912 		udp_icmp_error_ipv6(connp, mp, ira);
913 		return;
914 	}
915 	ASSERT(IPH_HDR_VERSION(ipha) == IPV4_VERSION);
916 
917 	/* Skip past the outer IP and ICMP headers */
918 	ASSERT(IPH_HDR_LENGTH(ipha) == ira->ira_ip_hdr_length);
919 	iph_hdr_length = ira->ira_ip_hdr_length;
920 	icmph = (icmph_t *)&mp->b_rptr[iph_hdr_length];
921 	ipha = (ipha_t *)&icmph[1];	/* Inner IP header */
922 
923 	/* Skip past the inner IP and find the ULP header */
924 	iph_hdr_length = IPH_HDR_LENGTH(ipha);
925 	udpha = (udpha_t *)((char *)ipha + iph_hdr_length);
926 
927 	switch (icmph->icmph_type) {
928 	case ICMP_DEST_UNREACHABLE:
929 		switch (icmph->icmph_code) {
930 		case ICMP_FRAGMENTATION_NEEDED: {
931 			ipha_t		*ipha;
932 			ip_xmit_attr_t	*ixa;
933 			/*
934 			 * IP has already adjusted the path MTU.
935 			 * But we need to adjust DF for IPv4.
936 			 */
937 			if (connp->conn_ipversion != IPV4_VERSION)
938 				break;
939 
940 			ixa = conn_get_ixa(connp, B_FALSE);
941 			if (ixa == NULL || ixa->ixa_ire == NULL) {
942 				/*
943 				 * Some other thread holds conn_ixa. We will
944 				 * redo this on the next ICMP too big.
945 				 */
946 				if (ixa != NULL)
947 					ixa_refrele(ixa);
948 				break;
949 			}
950 			(void) ip_get_pmtu(ixa);
951 
952 			mutex_enter(&connp->conn_lock);
953 			ipha = (ipha_t *)connp->conn_ht_iphc;
954 			if (ixa->ixa_flags & IXAF_PMTU_IPV4_DF) {
955 				ipha->ipha_fragment_offset_and_flags |=
956 				    IPH_DF_HTONS;
957 			} else {
958 				ipha->ipha_fragment_offset_and_flags &=
959 				    ~IPH_DF_HTONS;
960 			}
961 			mutex_exit(&connp->conn_lock);
962 			ixa_refrele(ixa);
963 			break;
964 		}
965 		case ICMP_PORT_UNREACHABLE:
966 		case ICMP_PROTOCOL_UNREACHABLE:
967 			error = ECONNREFUSED;
968 			break;
969 		default:
970 			/* Transient errors */
971 			break;
972 		}
973 		break;
974 	default:
975 		/* Transient errors */
976 		break;
977 	}
978 	if (error == 0) {
979 		freemsg(mp);
980 		return;
981 	}
982 
983 	/*
984 	 * Deliver T_UDERROR_IND when the application has asked for it.
985 	 * The socket layer enables this automatically when connected.
986 	 */
987 	if (!connp->conn_dgram_errind) {
988 		freemsg(mp);
989 		return;
990 	}
991 
992 	switch (connp->conn_family) {
993 	case AF_INET:
994 		sin = sin_null;
995 		sin.sin_family = AF_INET;
996 		sin.sin_addr.s_addr = ipha->ipha_dst;
997 		sin.sin_port = udpha->uha_dst_port;
998 		if (IPCL_IS_NONSTR(connp)) {
999 			mutex_enter(&connp->conn_lock);
1000 			if (udp->udp_state == TS_DATA_XFER) {
1001 				if (sin.sin_port == connp->conn_fport &&
1002 				    sin.sin_addr.s_addr ==
1003 				    connp->conn_faddr_v4) {
1004 					mutex_exit(&connp->conn_lock);
1005 					(*connp->conn_upcalls->su_set_error)
1006 					    (connp->conn_upper_handle, error);
1007 					goto done;
1008 				}
1009 			} else {
1010 				udp->udp_delayed_error = error;
1011 				*((sin_t *)&udp->udp_delayed_addr) = sin;
1012 			}
1013 			mutex_exit(&connp->conn_lock);
1014 		} else {
1015 			mp1 = mi_tpi_uderror_ind((char *)&sin, sizeof (sin_t),
1016 			    NULL, 0, error);
1017 			if (mp1 != NULL)
1018 				putnext(connp->conn_rq, mp1);
1019 		}
1020 		break;
1021 	case AF_INET6:
1022 		sin6 = sin6_null;
1023 		sin6.sin6_family = AF_INET6;
1024 		IN6_IPADDR_TO_V4MAPPED(ipha->ipha_dst, &sin6.sin6_addr);
1025 		sin6.sin6_port = udpha->uha_dst_port;
1026 		if (IPCL_IS_NONSTR(connp)) {
1027 			mutex_enter(&connp->conn_lock);
1028 			if (udp->udp_state == TS_DATA_XFER) {
1029 				if (sin6.sin6_port == connp->conn_fport &&
1030 				    IN6_ARE_ADDR_EQUAL(&sin6.sin6_addr,
1031 				    &connp->conn_faddr_v6)) {
1032 					mutex_exit(&connp->conn_lock);
1033 					(*connp->conn_upcalls->su_set_error)
1034 					    (connp->conn_upper_handle, error);
1035 					goto done;
1036 				}
1037 			} else {
1038 				udp->udp_delayed_error = error;
1039 				*((sin6_t *)&udp->udp_delayed_addr) = sin6;
1040 			}
1041 			mutex_exit(&connp->conn_lock);
1042 		} else {
1043 			mp1 = mi_tpi_uderror_ind((char *)&sin6, sizeof (sin6_t),
1044 			    NULL, 0, error);
1045 			if (mp1 != NULL)
1046 				putnext(connp->conn_rq, mp1);
1047 		}
1048 		break;
1049 	}
1050 done:
1051 	freemsg(mp);
1052 }
1053 
1054 /*
1055  * udp_icmp_error_ipv6 is called by udp_icmp_error to process ICMP for IPv6.
1056  * Generates the appropriate T_UDERROR_IND for permanent (non-transient) errors.
1057  * Assumes that IP has pulled up all the extension headers as well as the
1058  * ICMPv6 header.
1059  */
1060 static void
1061 udp_icmp_error_ipv6(conn_t *connp, mblk_t *mp, ip_recv_attr_t *ira)
1062 {
1063 	icmp6_t		*icmp6;
1064 	ip6_t		*ip6h, *outer_ip6h;
1065 	uint16_t	iph_hdr_length;
1066 	uint8_t		*nexthdrp;
1067 	udpha_t		*udpha;
1068 	sin6_t		sin6;
1069 	mblk_t		*mp1;
1070 	int		error = 0;
1071 	udp_t		*udp = connp->conn_udp;
1072 	udp_stack_t	*us = udp->udp_us;
1073 
1074 	outer_ip6h = (ip6_t *)mp->b_rptr;
1075 #ifdef DEBUG
1076 	if (outer_ip6h->ip6_nxt != IPPROTO_ICMPV6)
1077 		iph_hdr_length = ip_hdr_length_v6(mp, outer_ip6h);
1078 	else
1079 		iph_hdr_length = IPV6_HDR_LEN;
1080 	ASSERT(iph_hdr_length == ira->ira_ip_hdr_length);
1081 #endif
1082 	/* Skip past the outer IP and ICMP headers */
1083 	iph_hdr_length = ira->ira_ip_hdr_length;
1084 	icmp6 = (icmp6_t *)&mp->b_rptr[iph_hdr_length];
1085 
1086 	/* Skip past the inner IP and find the ULP header */
1087 	ip6h = (ip6_t *)&icmp6[1];	/* Inner IP header */
1088 	if (!ip_hdr_length_nexthdr_v6(mp, ip6h, &iph_hdr_length, &nexthdrp)) {
1089 		freemsg(mp);
1090 		return;
1091 	}
1092 	udpha = (udpha_t *)((char *)ip6h + iph_hdr_length);
1093 
1094 	switch (icmp6->icmp6_type) {
1095 	case ICMP6_DST_UNREACH:
1096 		switch (icmp6->icmp6_code) {
1097 		case ICMP6_DST_UNREACH_NOPORT:
1098 			error = ECONNREFUSED;
1099 			break;
1100 		case ICMP6_DST_UNREACH_ADMIN:
1101 		case ICMP6_DST_UNREACH_NOROUTE:
1102 		case ICMP6_DST_UNREACH_BEYONDSCOPE:
1103 		case ICMP6_DST_UNREACH_ADDR:
1104 			/* Transient errors */
1105 			break;
1106 		default:
1107 			break;
1108 		}
1109 		break;
1110 	case ICMP6_PACKET_TOO_BIG: {
1111 		struct T_unitdata_ind	*tudi;
1112 		struct T_opthdr		*toh;
1113 		size_t			udi_size;
1114 		mblk_t			*newmp;
1115 		t_scalar_t		opt_length = sizeof (struct T_opthdr) +
1116 		    sizeof (struct ip6_mtuinfo);
1117 		sin6_t			*sin6;
1118 		struct ip6_mtuinfo	*mtuinfo;
1119 
1120 		/*
1121 		 * If the application has requested to receive path mtu
1122 		 * information, send up an empty message containing an
1123 		 * IPV6_PATHMTU ancillary data item.
1124 		 */
1125 		if (!connp->conn_ipv6_recvpathmtu)
1126 			break;
1127 
1128 		udi_size = sizeof (struct T_unitdata_ind) + sizeof (sin6_t) +
1129 		    opt_length;
1130 		if ((newmp = allocb(udi_size, BPRI_MED)) == NULL) {
1131 			BUMP_MIB(&us->us_udp_mib, udpInErrors);
1132 			break;
1133 		}
1134 
1135 		/*
1136 		 * newmp->b_cont is left to NULL on purpose.  This is an
1137 		 * empty message containing only ancillary data.
1138 		 */
1139 		newmp->b_datap->db_type = M_PROTO;
1140 		tudi = (struct T_unitdata_ind *)newmp->b_rptr;
1141 		newmp->b_wptr = (uchar_t *)tudi + udi_size;
1142 		tudi->PRIM_type = T_UNITDATA_IND;
1143 		tudi->SRC_length = sizeof (sin6_t);
1144 		tudi->SRC_offset = sizeof (struct T_unitdata_ind);
1145 		tudi->OPT_offset = tudi->SRC_offset + sizeof (sin6_t);
1146 		tudi->OPT_length = opt_length;
1147 
1148 		sin6 = (sin6_t *)&tudi[1];
1149 		bzero(sin6, sizeof (sin6_t));
1150 		sin6->sin6_family = AF_INET6;
1151 		sin6->sin6_addr = connp->conn_faddr_v6;
1152 
1153 		toh = (struct T_opthdr *)&sin6[1];
1154 		toh->level = IPPROTO_IPV6;
1155 		toh->name = IPV6_PATHMTU;
1156 		toh->len = opt_length;
1157 		toh->status = 0;
1158 
1159 		mtuinfo = (struct ip6_mtuinfo *)&toh[1];
1160 		bzero(mtuinfo, sizeof (struct ip6_mtuinfo));
1161 		mtuinfo->ip6m_addr.sin6_family = AF_INET6;
1162 		mtuinfo->ip6m_addr.sin6_addr = ip6h->ip6_dst;
1163 		mtuinfo->ip6m_mtu = icmp6->icmp6_mtu;
1164 		/*
1165 		 * We've consumed everything we need from the original
1166 		 * message.  Free it, then send our empty message.
1167 		 */
1168 		freemsg(mp);
1169 		udp_ulp_recv(connp, newmp, msgdsize(newmp), ira);
1170 		return;
1171 	}
1172 	case ICMP6_TIME_EXCEEDED:
1173 		/* Transient errors */
1174 		break;
1175 	case ICMP6_PARAM_PROB:
1176 		/* If this corresponds to an ICMP_PROTOCOL_UNREACHABLE */
1177 		if (icmp6->icmp6_code == ICMP6_PARAMPROB_NEXTHEADER &&
1178 		    (uchar_t *)ip6h + icmp6->icmp6_pptr ==
1179 		    (uchar_t *)nexthdrp) {
1180 			error = ECONNREFUSED;
1181 			break;
1182 		}
1183 		break;
1184 	}
1185 	if (error == 0) {
1186 		freemsg(mp);
1187 		return;
1188 	}
1189 
1190 	/*
1191 	 * Deliver T_UDERROR_IND when the application has asked for it.
1192 	 * The socket layer enables this automatically when connected.
1193 	 */
1194 	if (!connp->conn_dgram_errind) {
1195 		freemsg(mp);
1196 		return;
1197 	}
1198 
1199 	sin6 = sin6_null;
1200 	sin6.sin6_family = AF_INET6;
1201 	sin6.sin6_addr = ip6h->ip6_dst;
1202 	sin6.sin6_port = udpha->uha_dst_port;
1203 	sin6.sin6_flowinfo = ip6h->ip6_vcf & ~IPV6_VERS_AND_FLOW_MASK;
1204 
1205 	if (IPCL_IS_NONSTR(connp)) {
1206 		mutex_enter(&connp->conn_lock);
1207 		if (udp->udp_state == TS_DATA_XFER) {
1208 			if (sin6.sin6_port == connp->conn_fport &&
1209 			    IN6_ARE_ADDR_EQUAL(&sin6.sin6_addr,
1210 			    &connp->conn_faddr_v6)) {
1211 				mutex_exit(&connp->conn_lock);
1212 				(*connp->conn_upcalls->su_set_error)
1213 				    (connp->conn_upper_handle, error);
1214 				goto done;
1215 			}
1216 		} else {
1217 			udp->udp_delayed_error = error;
1218 			*((sin6_t *)&udp->udp_delayed_addr) = sin6;
1219 		}
1220 		mutex_exit(&connp->conn_lock);
1221 	} else {
1222 		mp1 = mi_tpi_uderror_ind((char *)&sin6, sizeof (sin6_t),
1223 		    NULL, 0, error);
1224 		if (mp1 != NULL)
1225 			putnext(connp->conn_rq, mp1);
1226 	}
1227 done:
1228 	freemsg(mp);
1229 }
1230 
1231 /*
1232  * This routine responds to T_ADDR_REQ messages.  It is called by udp_wput.
1233  * The local address is filled in if endpoint is bound. The remote address
1234  * is filled in if remote address has been precified ("connected endpoint")
1235  * (The concept of connected CLTS sockets is alien to published TPI
1236  *  but we support it anyway).
1237  */
1238 static void
1239 udp_addr_req(queue_t *q, mblk_t *mp)
1240 {
1241 	struct sockaddr *sa;
1242 	mblk_t	*ackmp;
1243 	struct T_addr_ack *taa;
1244 	udp_t	*udp = Q_TO_UDP(q);
1245 	conn_t	*connp = udp->udp_connp;
1246 	uint_t	addrlen;
1247 
1248 	/* Make it large enough for worst case */
1249 	ackmp = reallocb(mp, sizeof (struct T_addr_ack) +
1250 	    2 * sizeof (sin6_t), 1);
1251 	if (ackmp == NULL) {
1252 		udp_err_ack(q, mp, TSYSERR, ENOMEM);
1253 		return;
1254 	}
1255 	taa = (struct T_addr_ack *)ackmp->b_rptr;
1256 
1257 	bzero(taa, sizeof (struct T_addr_ack));
1258 	ackmp->b_wptr = (uchar_t *)&taa[1];
1259 
1260 	taa->PRIM_type = T_ADDR_ACK;
1261 	ackmp->b_datap->db_type = M_PCPROTO;
1262 
1263 	if (connp->conn_family == AF_INET)
1264 		addrlen = sizeof (sin_t);
1265 	else
1266 		addrlen = sizeof (sin6_t);
1267 
1268 	mutex_enter(&connp->conn_lock);
1269 	/*
1270 	 * Note: Following code assumes 32 bit alignment of basic
1271 	 * data structures like sin_t and struct T_addr_ack.
1272 	 */
1273 	if (udp->udp_state != TS_UNBND) {
1274 		/*
1275 		 * Fill in local address first
1276 		 */
1277 		taa->LOCADDR_offset = sizeof (*taa);
1278 		taa->LOCADDR_length = addrlen;
1279 		sa = (struct sockaddr *)&taa[1];
1280 		(void) conn_getsockname(connp, sa, &addrlen);
1281 		ackmp->b_wptr += addrlen;
1282 	}
1283 	if (udp->udp_state == TS_DATA_XFER) {
1284 		/*
1285 		 * connected, fill remote address too
1286 		 */
1287 		taa->REMADDR_length = addrlen;
1288 		/* assumed 32-bit alignment */
1289 		taa->REMADDR_offset = taa->LOCADDR_offset + taa->LOCADDR_length;
1290 		sa = (struct sockaddr *)(ackmp->b_rptr + taa->REMADDR_offset);
1291 		(void) conn_getpeername(connp, sa, &addrlen);
1292 		ackmp->b_wptr += addrlen;
1293 	}
1294 	mutex_exit(&connp->conn_lock);
1295 	ASSERT(ackmp->b_wptr <= ackmp->b_datap->db_lim);
1296 	qreply(q, ackmp);
1297 }
1298 
1299 static void
1300 udp_copy_info(struct T_info_ack *tap, udp_t *udp)
1301 {
1302 	conn_t		*connp = udp->udp_connp;
1303 
1304 	if (connp->conn_family == AF_INET) {
1305 		*tap = udp_g_t_info_ack_ipv4;
1306 	} else {
1307 		*tap = udp_g_t_info_ack_ipv6;
1308 	}
1309 	tap->CURRENT_state = udp->udp_state;
1310 	tap->OPT_size = udp_max_optsize;
1311 }
1312 
1313 static void
1314 udp_do_capability_ack(udp_t *udp, struct T_capability_ack *tcap,
1315     t_uscalar_t cap_bits1)
1316 {
1317 	tcap->CAP_bits1 = 0;
1318 
1319 	if (cap_bits1 & TC1_INFO) {
1320 		udp_copy_info(&tcap->INFO_ack, udp);
1321 		tcap->CAP_bits1 |= TC1_INFO;
1322 	}
1323 }
1324 
1325 /*
1326  * This routine responds to T_CAPABILITY_REQ messages.  It is called by
1327  * udp_wput.  Much of the T_CAPABILITY_ACK information is copied from
1328  * udp_g_t_info_ack.  The current state of the stream is copied from
1329  * udp_state.
1330  */
1331 static void
1332 udp_capability_req(queue_t *q, mblk_t *mp)
1333 {
1334 	t_uscalar_t		cap_bits1;
1335 	struct T_capability_ack	*tcap;
1336 	udp_t	*udp = Q_TO_UDP(q);
1337 
1338 	cap_bits1 = ((struct T_capability_req *)mp->b_rptr)->CAP_bits1;
1339 
1340 	mp = tpi_ack_alloc(mp, sizeof (struct T_capability_ack),
1341 	    mp->b_datap->db_type, T_CAPABILITY_ACK);
1342 	if (!mp)
1343 		return;
1344 
1345 	tcap = (struct T_capability_ack *)mp->b_rptr;
1346 	udp_do_capability_ack(udp, tcap, cap_bits1);
1347 
1348 	qreply(q, mp);
1349 }
1350 
1351 /*
1352  * This routine responds to T_INFO_REQ messages.  It is called by udp_wput.
1353  * Most of the T_INFO_ACK information is copied from udp_g_t_info_ack.
1354  * The current state of the stream is copied from udp_state.
1355  */
1356 static void
1357 udp_info_req(queue_t *q, mblk_t *mp)
1358 {
1359 	udp_t *udp = Q_TO_UDP(q);
1360 
1361 	/* Create a T_INFO_ACK message. */
1362 	mp = tpi_ack_alloc(mp, sizeof (struct T_info_ack), M_PCPROTO,
1363 	    T_INFO_ACK);
1364 	if (!mp)
1365 		return;
1366 	udp_copy_info((struct T_info_ack *)mp->b_rptr, udp);
1367 	qreply(q, mp);
1368 }
1369 
1370 /* For /dev/udp aka AF_INET open */
1371 static int
1372 udp_openv4(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *credp)
1373 {
1374 	return (udp_open(q, devp, flag, sflag, credp, B_FALSE));
1375 }
1376 
1377 /* For /dev/udp6 aka AF_INET6 open */
1378 static int
1379 udp_openv6(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *credp)
1380 {
1381 	return (udp_open(q, devp, flag, sflag, credp, B_TRUE));
1382 }
1383 
1384 /*
1385  * This is the open routine for udp.  It allocates a udp_t structure for
1386  * the stream and, on the first open of the module, creates an ND table.
1387  */
1388 static int
1389 udp_open(queue_t *q, dev_t *devp, int flag, int sflag, cred_t *credp,
1390     boolean_t isv6)
1391 {
1392 	udp_t		*udp;
1393 	conn_t		*connp;
1394 	dev_t		conn_dev;
1395 	vmem_t		*minor_arena;
1396 	int		err;
1397 
1398 	/* If the stream is already open, return immediately. */
1399 	if (q->q_ptr != NULL)
1400 		return (0);
1401 
1402 	if (sflag == MODOPEN)
1403 		return (EINVAL);
1404 
1405 	if ((ip_minor_arena_la != NULL) && (flag & SO_SOCKSTR) &&
1406 	    ((conn_dev = inet_minor_alloc(ip_minor_arena_la)) != 0)) {
1407 		minor_arena = ip_minor_arena_la;
1408 	} else {
1409 		/*
1410 		 * Either minor numbers in the large arena were exhausted
1411 		 * or a non socket application is doing the open.
1412 		 * Try to allocate from the small arena.
1413 		 */
1414 		if ((conn_dev = inet_minor_alloc(ip_minor_arena_sa)) == 0)
1415 			return (EBUSY);
1416 
1417 		minor_arena = ip_minor_arena_sa;
1418 	}
1419 
1420 	if (flag & SO_FALLBACK) {
1421 		/*
1422 		 * Non streams socket needs a stream to fallback to
1423 		 */
1424 		RD(q)->q_ptr = (void *)conn_dev;
1425 		WR(q)->q_qinfo = &udp_fallback_sock_winit;
1426 		WR(q)->q_ptr = (void *)minor_arena;
1427 		qprocson(q);
1428 		return (0);
1429 	}
1430 
1431 	connp = udp_do_open(credp, isv6, KM_SLEEP, &err);
1432 	if (connp == NULL) {
1433 		inet_minor_free(minor_arena, conn_dev);
1434 		return (err);
1435 	}
1436 	udp = connp->conn_udp;
1437 
1438 	*devp = makedevice(getemajor(*devp), (minor_t)conn_dev);
1439 	connp->conn_dev = conn_dev;
1440 	connp->conn_minor_arena = minor_arena;
1441 
1442 	/*
1443 	 * Initialize the udp_t structure for this stream.
1444 	 */
1445 	q->q_ptr = connp;
1446 	WR(q)->q_ptr = connp;
1447 	connp->conn_rq = q;
1448 	connp->conn_wq = WR(q);
1449 
1450 	/*
1451 	 * Since this conn_t/udp_t is not yet visible to anybody else we don't
1452 	 * need to lock anything.
1453 	 */
1454 	ASSERT(connp->conn_proto == IPPROTO_UDP);
1455 	ASSERT(connp->conn_udp == udp);
1456 	ASSERT(udp->udp_connp == connp);
1457 
1458 	if (flag & SO_SOCKSTR) {
1459 		udp->udp_issocket = B_TRUE;
1460 	}
1461 
1462 	WR(q)->q_hiwat = connp->conn_sndbuf;
1463 	WR(q)->q_lowat = connp->conn_sndlowat;
1464 
1465 	qprocson(q);
1466 
1467 	/* Set the Stream head write offset and high watermark. */
1468 	(void) proto_set_tx_wroff(q, connp, connp->conn_wroff);
1469 	(void) proto_set_rx_hiwat(q, connp,
1470 	    udp_set_rcv_hiwat(udp, connp->conn_rcvbuf));
1471 
1472 	mutex_enter(&connp->conn_lock);
1473 	connp->conn_state_flags &= ~CONN_INCIPIENT;
1474 	mutex_exit(&connp->conn_lock);
1475 	return (0);
1476 }
1477 
1478 /*
1479  * Which UDP options OK to set through T_UNITDATA_REQ...
1480  */
1481 /* ARGSUSED */
1482 static boolean_t
1483 udp_opt_allow_udr_set(t_scalar_t level, t_scalar_t name)
1484 {
1485 	return (B_TRUE);
1486 }
1487 
1488 /*
1489  * This routine gets default values of certain options whose default
1490  * values are maintained by protcol specific code
1491  */
1492 int
1493 udp_opt_default(queue_t *q, t_scalar_t level, t_scalar_t name, uchar_t *ptr)
1494 {
1495 	udp_t		*udp = Q_TO_UDP(q);
1496 	udp_stack_t *us = udp->udp_us;
1497 	int *i1 = (int *)ptr;
1498 
1499 	switch (level) {
1500 	case IPPROTO_IP:
1501 		switch (name) {
1502 		case IP_MULTICAST_TTL:
1503 			*ptr = (uchar_t)IP_DEFAULT_MULTICAST_TTL;
1504 			return (sizeof (uchar_t));
1505 		case IP_MULTICAST_LOOP:
1506 			*ptr = (uchar_t)IP_DEFAULT_MULTICAST_LOOP;
1507 			return (sizeof (uchar_t));
1508 		}
1509 		break;
1510 	case IPPROTO_IPV6:
1511 		switch (name) {
1512 		case IPV6_MULTICAST_HOPS:
1513 			*i1 = IP_DEFAULT_MULTICAST_TTL;
1514 			return (sizeof (int));
1515 		case IPV6_MULTICAST_LOOP:
1516 			*i1 = IP_DEFAULT_MULTICAST_LOOP;
1517 			return (sizeof (int));
1518 		case IPV6_UNICAST_HOPS:
1519 			*i1 = us->us_ipv6_hoplimit;
1520 			return (sizeof (int));
1521 		}
1522 		break;
1523 	}
1524 	return (-1);
1525 }
1526 
1527 /*
1528  * This routine retrieves the current status of socket options.
1529  * It returns the size of the option retrieved, or -1.
1530  */
1531 int
1532 udp_opt_get(conn_t *connp, t_scalar_t level, t_scalar_t name,
1533     uchar_t *ptr)
1534 {
1535 	int		*i1 = (int *)ptr;
1536 	udp_t		*udp = connp->conn_udp;
1537 	int		len;
1538 	conn_opt_arg_t	coas;
1539 	int		retval;
1540 
1541 	coas.coa_connp = connp;
1542 	coas.coa_ixa = connp->conn_ixa;
1543 	coas.coa_ipp = &connp->conn_xmit_ipp;
1544 	coas.coa_ancillary = B_FALSE;
1545 	coas.coa_changed = 0;
1546 
1547 	/*
1548 	 * We assume that the optcom framework has checked for the set
1549 	 * of levels and names that are supported, hence we don't worry
1550 	 * about rejecting based on that.
1551 	 * First check for UDP specific handling, then pass to common routine.
1552 	 */
1553 	switch (level) {
1554 	case IPPROTO_IP:
1555 		/*
1556 		 * Only allow IPv4 option processing on IPv4 sockets.
1557 		 */
1558 		if (connp->conn_family != AF_INET)
1559 			return (-1);
1560 
1561 		switch (name) {
1562 		case IP_OPTIONS:
1563 		case T_IP_OPTIONS:
1564 			mutex_enter(&connp->conn_lock);
1565 			if (!(udp->udp_recv_ipp.ipp_fields &
1566 			    IPPF_IPV4_OPTIONS)) {
1567 				mutex_exit(&connp->conn_lock);
1568 				return (0);
1569 			}
1570 
1571 			len = udp->udp_recv_ipp.ipp_ipv4_options_len;
1572 			ASSERT(len != 0);
1573 			bcopy(udp->udp_recv_ipp.ipp_ipv4_options, ptr, len);
1574 			mutex_exit(&connp->conn_lock);
1575 			return (len);
1576 		}
1577 		break;
1578 	case IPPROTO_UDP:
1579 		switch (name) {
1580 		case UDP_NAT_T_ENDPOINT:
1581 			mutex_enter(&connp->conn_lock);
1582 			*i1 = udp->udp_nat_t_endpoint;
1583 			mutex_exit(&connp->conn_lock);
1584 			return (sizeof (int));
1585 		case UDP_RCVHDR:
1586 			mutex_enter(&connp->conn_lock);
1587 			*i1 = udp->udp_rcvhdr ? 1 : 0;
1588 			mutex_exit(&connp->conn_lock);
1589 			return (sizeof (int));
1590 		}
1591 	}
1592 	mutex_enter(&connp->conn_lock);
1593 	retval = conn_opt_get(&coas, level, name, ptr);
1594 	mutex_exit(&connp->conn_lock);
1595 	return (retval);
1596 }
1597 
1598 /*
1599  * This routine retrieves the current status of socket options.
1600  * It returns the size of the option retrieved, or -1.
1601  */
1602 int
1603 udp_tpi_opt_get(queue_t *q, t_scalar_t level, t_scalar_t name, uchar_t *ptr)
1604 {
1605 	conn_t		*connp = Q_TO_CONN(q);
1606 	int		err;
1607 
1608 	err = udp_opt_get(connp, level, name, ptr);
1609 	return (err);
1610 }
1611 
1612 /*
1613  * This routine sets socket options.
1614  */
1615 int
1616 udp_do_opt_set(conn_opt_arg_t *coa, int level, int name,
1617     uint_t inlen, uchar_t *invalp, cred_t *cr, boolean_t checkonly)
1618 {
1619 	conn_t		*connp = coa->coa_connp;
1620 	ip_xmit_attr_t	*ixa = coa->coa_ixa;
1621 	udp_t		*udp = connp->conn_udp;
1622 	udp_stack_t	*us = udp->udp_us;
1623 	int		*i1 = (int *)invalp;
1624 	boolean_t 	onoff = (*i1 == 0) ? 0 : 1;
1625 	int		error;
1626 
1627 	ASSERT(MUTEX_NOT_HELD(&coa->coa_connp->conn_lock));
1628 	/*
1629 	 * First do UDP specific sanity checks and handle UDP specific
1630 	 * options. Note that some IPPROTO_UDP options are handled
1631 	 * by conn_opt_set.
1632 	 */
1633 	switch (level) {
1634 	case SOL_SOCKET:
1635 		switch (name) {
1636 		case SO_SNDBUF:
1637 			if (*i1 > us->us_max_buf) {
1638 				return (ENOBUFS);
1639 			}
1640 			break;
1641 		case SO_RCVBUF:
1642 			if (*i1 > us->us_max_buf) {
1643 				return (ENOBUFS);
1644 			}
1645 			break;
1646 
1647 		case SCM_UCRED: {
1648 			struct ucred_s *ucr;
1649 			cred_t *newcr;
1650 			ts_label_t *tsl;
1651 
1652 			/*
1653 			 * Only sockets that have proper privileges and are
1654 			 * bound to MLPs will have any other value here, so
1655 			 * this implicitly tests for privilege to set label.
1656 			 */
1657 			if (connp->conn_mlp_type == mlptSingle)
1658 				break;
1659 
1660 			ucr = (struct ucred_s *)invalp;
1661 			if (inlen < sizeof (*ucr) + sizeof (bslabel_t) ||
1662 			    ucr->uc_labeloff < sizeof (*ucr) ||
1663 			    ucr->uc_labeloff + sizeof (bslabel_t) > inlen)
1664 				return (EINVAL);
1665 			if (!checkonly) {
1666 				/*
1667 				 * Set ixa_tsl to the new label.
1668 				 * We assume that crgetzoneid doesn't change
1669 				 * as part of the SCM_UCRED.
1670 				 */
1671 				ASSERT(cr != NULL);
1672 				if ((tsl = crgetlabel(cr)) == NULL)
1673 					return (EINVAL);
1674 				newcr = copycred_from_bslabel(cr, UCLABEL(ucr),
1675 				    tsl->tsl_doi, KM_NOSLEEP);
1676 				if (newcr == NULL)
1677 					return (ENOSR);
1678 				ASSERT(newcr->cr_label != NULL);
1679 				/*
1680 				 * Move the hold on the cr_label to ixa_tsl by
1681 				 * setting cr_label to NULL. Then release newcr.
1682 				 */
1683 				ip_xmit_attr_replace_tsl(ixa, newcr->cr_label);
1684 				ixa->ixa_flags |= IXAF_UCRED_TSL;
1685 				newcr->cr_label = NULL;
1686 				crfree(newcr);
1687 				coa->coa_changed |= COA_HEADER_CHANGED;
1688 				coa->coa_changed |= COA_WROFF_CHANGED;
1689 			}
1690 			/* Fully handled this option. */
1691 			return (0);
1692 		}
1693 		}
1694 		break;
1695 	case IPPROTO_UDP:
1696 		switch (name) {
1697 		case UDP_NAT_T_ENDPOINT:
1698 			if ((error = secpolicy_ip_config(cr, B_FALSE)) != 0) {
1699 				return (error);
1700 			}
1701 
1702 			/*
1703 			 * Use conn_family instead so we can avoid ambiguitites
1704 			 * with AF_INET6 sockets that may switch from IPv4
1705 			 * to IPv6.
1706 			 */
1707 			if (connp->conn_family != AF_INET) {
1708 				return (EAFNOSUPPORT);
1709 			}
1710 
1711 			if (!checkonly) {
1712 				mutex_enter(&connp->conn_lock);
1713 				udp->udp_nat_t_endpoint = onoff;
1714 				mutex_exit(&connp->conn_lock);
1715 				coa->coa_changed |= COA_HEADER_CHANGED;
1716 				coa->coa_changed |= COA_WROFF_CHANGED;
1717 			}
1718 			/* Fully handled this option. */
1719 			return (0);
1720 		case UDP_RCVHDR:
1721 			mutex_enter(&connp->conn_lock);
1722 			udp->udp_rcvhdr = onoff;
1723 			mutex_exit(&connp->conn_lock);
1724 			return (0);
1725 		}
1726 		break;
1727 	}
1728 	error = conn_opt_set(coa, level, name, inlen, invalp,
1729 	    checkonly, cr);
1730 	return (error);
1731 }
1732 
1733 /*
1734  * This routine sets socket options.
1735  */
1736 int
1737 udp_opt_set(conn_t *connp, uint_t optset_context, int level,
1738     int name, uint_t inlen, uchar_t *invalp, uint_t *outlenp,
1739     uchar_t *outvalp, void *thisdg_attrs, cred_t *cr)
1740 {
1741 	udp_t		*udp = connp->conn_udp;
1742 	int		err;
1743 	conn_opt_arg_t	coas, *coa;
1744 	boolean_t	checkonly;
1745 	udp_stack_t	*us = udp->udp_us;
1746 
1747 	switch (optset_context) {
1748 	case SETFN_OPTCOM_CHECKONLY:
1749 		checkonly = B_TRUE;
1750 		/*
1751 		 * Note: Implies T_CHECK semantics for T_OPTCOM_REQ
1752 		 * inlen != 0 implies value supplied and
1753 		 * 	we have to "pretend" to set it.
1754 		 * inlen == 0 implies that there is no
1755 		 * 	value part in T_CHECK request and just validation
1756 		 * done elsewhere should be enough, we just return here.
1757 		 */
1758 		if (inlen == 0) {
1759 			*outlenp = 0;
1760 			return (0);
1761 		}
1762 		break;
1763 	case SETFN_OPTCOM_NEGOTIATE:
1764 		checkonly = B_FALSE;
1765 		break;
1766 	case SETFN_UD_NEGOTIATE:
1767 	case SETFN_CONN_NEGOTIATE:
1768 		checkonly = B_FALSE;
1769 		/*
1770 		 * Negotiating local and "association-related" options
1771 		 * through T_UNITDATA_REQ.
1772 		 *
1773 		 * Following routine can filter out ones we do not
1774 		 * want to be "set" this way.
1775 		 */
1776 		if (!udp_opt_allow_udr_set(level, name)) {
1777 			*outlenp = 0;
1778 			return (EINVAL);
1779 		}
1780 		break;
1781 	default:
1782 		/*
1783 		 * We should never get here
1784 		 */
1785 		*outlenp = 0;
1786 		return (EINVAL);
1787 	}
1788 
1789 	ASSERT((optset_context != SETFN_OPTCOM_CHECKONLY) ||
1790 	    (optset_context == SETFN_OPTCOM_CHECKONLY && inlen != 0));
1791 
1792 	if (thisdg_attrs != NULL) {
1793 		/* Options from T_UNITDATA_REQ */
1794 		coa = (conn_opt_arg_t *)thisdg_attrs;
1795 		ASSERT(coa->coa_connp == connp);
1796 		ASSERT(coa->coa_ixa != NULL);
1797 		ASSERT(coa->coa_ipp != NULL);
1798 		ASSERT(coa->coa_ancillary);
1799 	} else {
1800 		coa = &coas;
1801 		coas.coa_connp = connp;
1802 		/* Get a reference on conn_ixa to prevent concurrent mods */
1803 		coas.coa_ixa = conn_get_ixa(connp, B_TRUE);
1804 		if (coas.coa_ixa == NULL) {
1805 			*outlenp = 0;
1806 			return (ENOMEM);
1807 		}
1808 		coas.coa_ipp = &connp->conn_xmit_ipp;
1809 		coas.coa_ancillary = B_FALSE;
1810 		coas.coa_changed = 0;
1811 	}
1812 
1813 	err = udp_do_opt_set(coa, level, name, inlen, invalp,
1814 	    cr, checkonly);
1815 	if (err != 0) {
1816 errout:
1817 		if (!coa->coa_ancillary)
1818 			ixa_refrele(coa->coa_ixa);
1819 		*outlenp = 0;
1820 		return (err);
1821 	}
1822 	/* Handle DHCPINIT here outside of lock */
1823 	if (level == IPPROTO_IP && name == IP_DHCPINIT_IF) {
1824 		uint_t	ifindex;
1825 		ill_t	*ill;
1826 
1827 		ifindex = *(uint_t *)invalp;
1828 		if (ifindex == 0) {
1829 			ill = NULL;
1830 		} else {
1831 			ill = ill_lookup_on_ifindex(ifindex, B_FALSE,
1832 			    coa->coa_ixa->ixa_ipst);
1833 			if (ill == NULL) {
1834 				err = ENXIO;
1835 				goto errout;
1836 			}
1837 
1838 			mutex_enter(&ill->ill_lock);
1839 			if (ill->ill_state_flags & ILL_CONDEMNED) {
1840 				mutex_exit(&ill->ill_lock);
1841 				ill_refrele(ill);
1842 				err = ENXIO;
1843 				goto errout;
1844 			}
1845 			if (IS_VNI(ill)) {
1846 				mutex_exit(&ill->ill_lock);
1847 				ill_refrele(ill);
1848 				err = EINVAL;
1849 				goto errout;
1850 			}
1851 		}
1852 		mutex_enter(&connp->conn_lock);
1853 
1854 		if (connp->conn_dhcpinit_ill != NULL) {
1855 			/*
1856 			 * We've locked the conn so conn_cleanup_ill()
1857 			 * cannot clear conn_dhcpinit_ill -- so it's
1858 			 * safe to access the ill.
1859 			 */
1860 			ill_t *oill = connp->conn_dhcpinit_ill;
1861 
1862 			ASSERT(oill->ill_dhcpinit != 0);
1863 			atomic_dec_32(&oill->ill_dhcpinit);
1864 			ill_set_inputfn(connp->conn_dhcpinit_ill);
1865 			connp->conn_dhcpinit_ill = NULL;
1866 		}
1867 
1868 		if (ill != NULL) {
1869 			connp->conn_dhcpinit_ill = ill;
1870 			atomic_inc_32(&ill->ill_dhcpinit);
1871 			ill_set_inputfn(ill);
1872 			mutex_exit(&connp->conn_lock);
1873 			mutex_exit(&ill->ill_lock);
1874 			ill_refrele(ill);
1875 		} else {
1876 			mutex_exit(&connp->conn_lock);
1877 		}
1878 	}
1879 
1880 	/*
1881 	 * Common case of OK return with outval same as inval.
1882 	 */
1883 	if (invalp != outvalp) {
1884 		/* don't trust bcopy for identical src/dst */
1885 		(void) bcopy(invalp, outvalp, inlen);
1886 	}
1887 	*outlenp = inlen;
1888 
1889 	/*
1890 	 * If this was not ancillary data, then we rebuild the headers,
1891 	 * update the IRE/NCE, and IPsec as needed.
1892 	 * Since the label depends on the destination we go through
1893 	 * ip_set_destination first.
1894 	 */
1895 	if (coa->coa_ancillary) {
1896 		return (0);
1897 	}
1898 
1899 	if (coa->coa_changed & COA_ROUTE_CHANGED) {
1900 		in6_addr_t saddr, faddr, nexthop;
1901 		in_port_t fport;
1902 
1903 		/*
1904 		 * We clear lastdst to make sure we pick up the change
1905 		 * next time sending.
1906 		 * If we are connected we re-cache the information.
1907 		 * We ignore errors to preserve BSD behavior.
1908 		 * Note that we don't redo IPsec policy lookup here
1909 		 * since the final destination (or source) didn't change.
1910 		 */
1911 		mutex_enter(&connp->conn_lock);
1912 		connp->conn_v6lastdst = ipv6_all_zeros;
1913 
1914 		ip_attr_nexthop(coa->coa_ipp, coa->coa_ixa,
1915 		    &connp->conn_faddr_v6, &nexthop);
1916 		saddr = connp->conn_saddr_v6;
1917 		faddr = connp->conn_faddr_v6;
1918 		fport = connp->conn_fport;
1919 		mutex_exit(&connp->conn_lock);
1920 
1921 		if (!IN6_IS_ADDR_UNSPECIFIED(&faddr) &&
1922 		    !IN6_IS_ADDR_V4MAPPED_ANY(&faddr)) {
1923 			(void) ip_attr_connect(connp, coa->coa_ixa,
1924 			    &saddr, &faddr, &nexthop, fport, NULL, NULL,
1925 			    IPDF_ALLOW_MCBC | IPDF_VERIFY_DST);
1926 		}
1927 	}
1928 
1929 	ixa_refrele(coa->coa_ixa);
1930 
1931 	if (coa->coa_changed & COA_HEADER_CHANGED) {
1932 		/*
1933 		 * Rebuild the header template if we are connected.
1934 		 * Otherwise clear conn_v6lastdst so we rebuild the header
1935 		 * in the data path.
1936 		 */
1937 		mutex_enter(&connp->conn_lock);
1938 		if (!IN6_IS_ADDR_UNSPECIFIED(&connp->conn_faddr_v6) &&
1939 		    !IN6_IS_ADDR_V4MAPPED_ANY(&connp->conn_faddr_v6)) {
1940 			err = udp_build_hdr_template(connp,
1941 			    &connp->conn_saddr_v6, &connp->conn_faddr_v6,
1942 			    connp->conn_fport, connp->conn_flowinfo);
1943 			if (err != 0) {
1944 				mutex_exit(&connp->conn_lock);
1945 				return (err);
1946 			}
1947 		} else {
1948 			connp->conn_v6lastdst = ipv6_all_zeros;
1949 		}
1950 		mutex_exit(&connp->conn_lock);
1951 	}
1952 	if (coa->coa_changed & COA_RCVBUF_CHANGED) {
1953 		(void) proto_set_rx_hiwat(connp->conn_rq, connp,
1954 		    connp->conn_rcvbuf);
1955 	}
1956 	if ((coa->coa_changed & COA_SNDBUF_CHANGED) && !IPCL_IS_NONSTR(connp)) {
1957 		connp->conn_wq->q_hiwat = connp->conn_sndbuf;
1958 	}
1959 	if (coa->coa_changed & COA_WROFF_CHANGED) {
1960 		/* Increase wroff if needed */
1961 		uint_t wroff;
1962 
1963 		mutex_enter(&connp->conn_lock);
1964 		wroff = connp->conn_ht_iphc_allocated + us->us_wroff_extra;
1965 		if (udp->udp_nat_t_endpoint)
1966 			wroff += sizeof (uint32_t);
1967 		if (wroff > connp->conn_wroff) {
1968 			connp->conn_wroff = wroff;
1969 			mutex_exit(&connp->conn_lock);
1970 			(void) proto_set_tx_wroff(connp->conn_rq, connp, wroff);
1971 		} else {
1972 			mutex_exit(&connp->conn_lock);
1973 		}
1974 	}
1975 	return (err);
1976 }
1977 
1978 /* This routine sets socket options. */
1979 int
1980 udp_tpi_opt_set(queue_t *q, uint_t optset_context, int level, int name,
1981     uint_t inlen, uchar_t *invalp, uint_t *outlenp, uchar_t *outvalp,
1982     void *thisdg_attrs, cred_t *cr)
1983 {
1984 	conn_t	*connp = Q_TO_CONN(q);
1985 	int error;
1986 
1987 	error = udp_opt_set(connp, optset_context, level, name, inlen, invalp,
1988 	    outlenp, outvalp, thisdg_attrs, cr);
1989 	return (error);
1990 }
1991 
1992 /*
1993  * Setup IP and UDP headers.
1994  * Returns NULL on allocation failure, in which case data_mp is freed.
1995  */
1996 mblk_t *
1997 udp_prepend_hdr(conn_t *connp, ip_xmit_attr_t *ixa, const ip_pkt_t *ipp,
1998     const in6_addr_t *v6src, const in6_addr_t *v6dst, in_port_t dstport,
1999     uint32_t flowinfo, mblk_t *data_mp, int *errorp)
2000 {
2001 	mblk_t		*mp;
2002 	udpha_t		*udpha;
2003 	udp_stack_t	*us = connp->conn_netstack->netstack_udp;
2004 	uint_t		data_len;
2005 	uint32_t	cksum;
2006 	udp_t		*udp = connp->conn_udp;
2007 	boolean_t	insert_spi = udp->udp_nat_t_endpoint;
2008 	uint_t		ulp_hdr_len;
2009 
2010 	data_len = msgdsize(data_mp);
2011 	ulp_hdr_len = UDPH_SIZE;
2012 	if (insert_spi)
2013 		ulp_hdr_len += sizeof (uint32_t);
2014 
2015 	mp = conn_prepend_hdr(ixa, ipp, v6src, v6dst, IPPROTO_UDP, flowinfo,
2016 	    ulp_hdr_len, data_mp, data_len, us->us_wroff_extra, &cksum, errorp);
2017 	if (mp == NULL) {
2018 		ASSERT(*errorp != 0);
2019 		return (NULL);
2020 	}
2021 
2022 	data_len += ulp_hdr_len;
2023 	ixa->ixa_pktlen = data_len + ixa->ixa_ip_hdr_length;
2024 
2025 	udpha = (udpha_t *)(mp->b_rptr + ixa->ixa_ip_hdr_length);
2026 	udpha->uha_src_port = connp->conn_lport;
2027 	udpha->uha_dst_port = dstport;
2028 	udpha->uha_checksum = 0;
2029 	udpha->uha_length = htons(data_len);
2030 
2031 	/*
2032 	 * If there was a routing option/header then conn_prepend_hdr
2033 	 * has massaged it and placed the pseudo-header checksum difference
2034 	 * in the cksum argument.
2035 	 *
2036 	 * Setup header length and prepare for ULP checksum done in IP.
2037 	 *
2038 	 * We make it easy for IP to include our pseudo header
2039 	 * by putting our length in uha_checksum.
2040 	 * The IP source, destination, and length have already been set by
2041 	 * conn_prepend_hdr.
2042 	 */
2043 	cksum += data_len;
2044 	cksum = (cksum >> 16) + (cksum & 0xFFFF);
2045 	ASSERT(cksum < 0x10000);
2046 
2047 	if (ixa->ixa_flags & IXAF_IS_IPV4) {
2048 		ipha_t	*ipha = (ipha_t *)mp->b_rptr;
2049 
2050 		ASSERT(ntohs(ipha->ipha_length) == ixa->ixa_pktlen);
2051 
2052 		/* IP does the checksum if uha_checksum is non-zero */
2053 		if (us->us_do_checksum) {
2054 			if (cksum == 0)
2055 				udpha->uha_checksum = 0xffff;
2056 			else
2057 				udpha->uha_checksum = htons(cksum);
2058 		} else {
2059 			udpha->uha_checksum = 0;
2060 		}
2061 	} else {
2062 		ip6_t *ip6h = (ip6_t *)mp->b_rptr;
2063 
2064 		ASSERT(ntohs(ip6h->ip6_plen) + IPV6_HDR_LEN == ixa->ixa_pktlen);
2065 		if (cksum == 0)
2066 			udpha->uha_checksum = 0xffff;
2067 		else
2068 			udpha->uha_checksum = htons(cksum);
2069 	}
2070 
2071 	/* Insert all-0s SPI now. */
2072 	if (insert_spi)
2073 		*((uint32_t *)(udpha + 1)) = 0;
2074 
2075 	return (mp);
2076 }
2077 
2078 static int
2079 udp_build_hdr_template(conn_t *connp, const in6_addr_t *v6src,
2080     const in6_addr_t *v6dst, in_port_t dstport, uint32_t flowinfo)
2081 {
2082 	udpha_t		*udpha;
2083 	int		error;
2084 
2085 	ASSERT(MUTEX_HELD(&connp->conn_lock));
2086 	/*
2087 	 * We clear lastdst to make sure we don't use the lastdst path
2088 	 * next time sending since we might not have set v6dst yet.
2089 	 */
2090 	connp->conn_v6lastdst = ipv6_all_zeros;
2091 
2092 	error = conn_build_hdr_template(connp, UDPH_SIZE, 0, v6src, v6dst,
2093 	    flowinfo);
2094 	if (error != 0)
2095 		return (error);
2096 
2097 	/*
2098 	 * Any routing header/option has been massaged. The checksum difference
2099 	 * is stored in conn_sum.
2100 	 */
2101 	udpha = (udpha_t *)connp->conn_ht_ulp;
2102 	udpha->uha_src_port = connp->conn_lport;
2103 	udpha->uha_dst_port = dstport;
2104 	udpha->uha_checksum = 0;
2105 	udpha->uha_length = htons(UDPH_SIZE);	/* Filled in later */
2106 	return (0);
2107 }
2108 
2109 static mblk_t *
2110 udp_queue_fallback(udp_t *udp, mblk_t *mp)
2111 {
2112 	ASSERT(MUTEX_HELD(&udp->udp_recv_lock));
2113 	if (IPCL_IS_NONSTR(udp->udp_connp)) {
2114 		/*
2115 		 * fallback has started but messages have not been moved yet
2116 		 */
2117 		if (udp->udp_fallback_queue_head == NULL) {
2118 			ASSERT(udp->udp_fallback_queue_tail == NULL);
2119 			udp->udp_fallback_queue_head = mp;
2120 			udp->udp_fallback_queue_tail = mp;
2121 		} else {
2122 			ASSERT(udp->udp_fallback_queue_tail != NULL);
2123 			udp->udp_fallback_queue_tail->b_next = mp;
2124 			udp->udp_fallback_queue_tail = mp;
2125 		}
2126 		return (NULL);
2127 	} else {
2128 		/*
2129 		 * Fallback completed, let the caller putnext() the mblk.
2130 		 */
2131 		return (mp);
2132 	}
2133 }
2134 
2135 /*
2136  * Deliver data to ULP. In case we have a socket, and it's falling back to
2137  * TPI, then we'll queue the mp for later processing.
2138  */
2139 static void
2140 udp_ulp_recv(conn_t *connp, mblk_t *mp, uint_t len, ip_recv_attr_t *ira)
2141 {
2142 	if (IPCL_IS_NONSTR(connp)) {
2143 		udp_t *udp = connp->conn_udp;
2144 		int error;
2145 
2146 		ASSERT(len == msgdsize(mp));
2147 		if ((*connp->conn_upcalls->su_recv)
2148 		    (connp->conn_upper_handle, mp, len, 0, &error, NULL) < 0) {
2149 			mutex_enter(&udp->udp_recv_lock);
2150 			if (error == ENOSPC) {
2151 				/*
2152 				 * let's confirm while holding the lock
2153 				 */
2154 				if ((*connp->conn_upcalls->su_recv)
2155 				    (connp->conn_upper_handle, NULL, 0, 0,
2156 				    &error, NULL) < 0) {
2157 					ASSERT(error == ENOSPC);
2158 					if (error == ENOSPC) {
2159 						connp->conn_flow_cntrld =
2160 						    B_TRUE;
2161 					}
2162 				}
2163 				mutex_exit(&udp->udp_recv_lock);
2164 			} else {
2165 				ASSERT(error == EOPNOTSUPP);
2166 				mp = udp_queue_fallback(udp, mp);
2167 				mutex_exit(&udp->udp_recv_lock);
2168 				if (mp != NULL)
2169 					putnext(connp->conn_rq, mp);
2170 			}
2171 		}
2172 		ASSERT(MUTEX_NOT_HELD(&udp->udp_recv_lock));
2173 	} else {
2174 		if (is_system_labeled()) {
2175 			ASSERT(ira->ira_cred != NULL);
2176 			/*
2177 			 * Provide for protocols above UDP such as RPC
2178 			 * NOPID leaves db_cpid unchanged.
2179 			 */
2180 			mblk_setcred(mp, ira->ira_cred, NOPID);
2181 		}
2182 
2183 		putnext(connp->conn_rq, mp);
2184 	}
2185 }
2186 
2187 /*
2188  * This is the inbound data path.
2189  * IP has already pulled up the IP plus UDP headers and verified alignment
2190  * etc.
2191  */
2192 /* ARGSUSED2 */
2193 static void
2194 udp_input(void *arg1, mblk_t *mp, void *arg2, ip_recv_attr_t *ira)
2195 {
2196 	conn_t			*connp = (conn_t *)arg1;
2197 	struct T_unitdata_ind	*tudi;
2198 	uchar_t			*rptr;		/* Pointer to IP header */
2199 	int			hdr_length;	/* Length of IP+UDP headers */
2200 	int			udi_size;	/* Size of T_unitdata_ind */
2201 	int			pkt_len;
2202 	udp_t			*udp;
2203 	udpha_t			*udpha;
2204 	ip_pkt_t		ipps;
2205 	ip6_t			*ip6h;
2206 	mblk_t			*mp1;
2207 	uint32_t		udp_ipv4_options_len;
2208 	crb_t			recv_ancillary;
2209 	udp_stack_t		*us;
2210 
2211 	ASSERT(connp->conn_flags & IPCL_UDPCONN);
2212 
2213 	udp = connp->conn_udp;
2214 	us = udp->udp_us;
2215 	rptr = mp->b_rptr;
2216 
2217 	ASSERT(DB_TYPE(mp) == M_DATA);
2218 	ASSERT(OK_32PTR(rptr));
2219 	ASSERT(ira->ira_pktlen == msgdsize(mp));
2220 	pkt_len = ira->ira_pktlen;
2221 
2222 	/*
2223 	 * Get a snapshot of these and allow other threads to change
2224 	 * them after that. We need the same recv_ancillary when determining
2225 	 * the size as when adding the ancillary data items.
2226 	 */
2227 	mutex_enter(&connp->conn_lock);
2228 	udp_ipv4_options_len = udp->udp_recv_ipp.ipp_ipv4_options_len;
2229 	recv_ancillary = connp->conn_recv_ancillary;
2230 	mutex_exit(&connp->conn_lock);
2231 
2232 	hdr_length = ira->ira_ip_hdr_length;
2233 
2234 	/*
2235 	 * IP inspected the UDP header thus all of it must be in the mblk.
2236 	 * UDP length check is performed for IPv6 packets and IPv4 packets
2237 	 * to check if the size of the packet as specified
2238 	 * by the UDP header is the same as the length derived from the IP
2239 	 * header.
2240 	 */
2241 	udpha = (udpha_t *)(rptr + hdr_length);
2242 	if (pkt_len != ntohs(udpha->uha_length) + hdr_length)
2243 		goto tossit;
2244 
2245 	hdr_length += UDPH_SIZE;
2246 	ASSERT(MBLKL(mp) >= hdr_length);	/* IP did a pullup */
2247 
2248 	/* Initialize regardless of IP version */
2249 	ipps.ipp_fields = 0;
2250 
2251 	if (((ira->ira_flags & IRAF_IPV4_OPTIONS) ||
2252 	    udp_ipv4_options_len > 0) &&
2253 	    connp->conn_family == AF_INET) {
2254 		int	err;
2255 
2256 		/*
2257 		 * Record/update udp_recv_ipp with the lock
2258 		 * held. Not needed for AF_INET6 sockets
2259 		 * since they don't support a getsockopt of IP_OPTIONS.
2260 		 */
2261 		mutex_enter(&connp->conn_lock);
2262 		err = ip_find_hdr_v4((ipha_t *)rptr, &udp->udp_recv_ipp,
2263 		    B_TRUE);
2264 		if (err != 0) {
2265 			/* Allocation failed. Drop packet */
2266 			mutex_exit(&connp->conn_lock);
2267 			freemsg(mp);
2268 			BUMP_MIB(&us->us_udp_mib, udpInErrors);
2269 			return;
2270 		}
2271 		mutex_exit(&connp->conn_lock);
2272 	}
2273 
2274 	if (recv_ancillary.crb_all != 0) {
2275 		/*
2276 		 * Record packet information in the ip_pkt_t
2277 		 */
2278 		if (ira->ira_flags & IRAF_IS_IPV4) {
2279 			ASSERT(IPH_HDR_VERSION(rptr) == IPV4_VERSION);
2280 			ASSERT(MBLKL(mp) >= sizeof (ipha_t));
2281 			ASSERT(((ipha_t *)rptr)->ipha_protocol == IPPROTO_UDP);
2282 			ASSERT(ira->ira_ip_hdr_length == IPH_HDR_LENGTH(rptr));
2283 
2284 			(void) ip_find_hdr_v4((ipha_t *)rptr, &ipps, B_FALSE);
2285 		} else {
2286 			uint8_t nexthdrp;
2287 
2288 			ASSERT(IPH_HDR_VERSION(rptr) == IPV6_VERSION);
2289 			/*
2290 			 * IPv6 packets can only be received by applications
2291 			 * that are prepared to receive IPv6 addresses.
2292 			 * The IP fanout must ensure this.
2293 			 */
2294 			ASSERT(connp->conn_family == AF_INET6);
2295 
2296 			ip6h = (ip6_t *)rptr;
2297 
2298 			/* We don't care about the length, but need the ipp */
2299 			hdr_length = ip_find_hdr_v6(mp, ip6h, B_TRUE, &ipps,
2300 			    &nexthdrp);
2301 			ASSERT(hdr_length == ira->ira_ip_hdr_length);
2302 			/* Restore */
2303 			hdr_length = ira->ira_ip_hdr_length + UDPH_SIZE;
2304 			ASSERT(nexthdrp == IPPROTO_UDP);
2305 		}
2306 	}
2307 
2308 	/*
2309 	 * This is the inbound data path.  Packets are passed upstream as
2310 	 * T_UNITDATA_IND messages.
2311 	 */
2312 	if (connp->conn_family == AF_INET) {
2313 		sin_t *sin;
2314 
2315 		ASSERT(IPH_HDR_VERSION((ipha_t *)rptr) == IPV4_VERSION);
2316 
2317 		/*
2318 		 * Normally only send up the source address.
2319 		 * If any ancillary data items are wanted we add those.
2320 		 */
2321 		udi_size = sizeof (struct T_unitdata_ind) + sizeof (sin_t);
2322 		if (recv_ancillary.crb_all != 0) {
2323 			udi_size += conn_recvancillary_size(connp,
2324 			    recv_ancillary, ira, mp, &ipps);
2325 		}
2326 
2327 		/* Allocate a message block for the T_UNITDATA_IND structure. */
2328 		mp1 = allocb(udi_size, BPRI_MED);
2329 		if (mp1 == NULL) {
2330 			freemsg(mp);
2331 			BUMP_MIB(&us->us_udp_mib, udpInErrors);
2332 			return;
2333 		}
2334 		mp1->b_cont = mp;
2335 		mp1->b_datap->db_type = M_PROTO;
2336 		tudi = (struct T_unitdata_ind *)mp1->b_rptr;
2337 		mp1->b_wptr = (uchar_t *)tudi + udi_size;
2338 		tudi->PRIM_type = T_UNITDATA_IND;
2339 		tudi->SRC_length = sizeof (sin_t);
2340 		tudi->SRC_offset = sizeof (struct T_unitdata_ind);
2341 		tudi->OPT_offset = sizeof (struct T_unitdata_ind) +
2342 		    sizeof (sin_t);
2343 		udi_size -= (sizeof (struct T_unitdata_ind) + sizeof (sin_t));
2344 		tudi->OPT_length = udi_size;
2345 		sin = (sin_t *)&tudi[1];
2346 		sin->sin_addr.s_addr = ((ipha_t *)rptr)->ipha_src;
2347 		sin->sin_port =	udpha->uha_src_port;
2348 		sin->sin_family = connp->conn_family;
2349 		*(uint32_t *)&sin->sin_zero[0] = 0;
2350 		*(uint32_t *)&sin->sin_zero[4] = 0;
2351 
2352 		/*
2353 		 * Add options if IP_RECVDSTADDR, IP_RECVIF, IP_RECVSLLA or
2354 		 * IP_RECVTTL has been set.
2355 		 */
2356 		if (udi_size != 0) {
2357 			conn_recvancillary_add(connp, recv_ancillary, ira,
2358 			    &ipps, (uchar_t *)&sin[1], udi_size);
2359 		}
2360 	} else {
2361 		sin6_t *sin6;
2362 
2363 		/*
2364 		 * Handle both IPv4 and IPv6 packets for IPv6 sockets.
2365 		 *
2366 		 * Normally we only send up the address. If receiving of any
2367 		 * optional receive side information is enabled, we also send
2368 		 * that up as options.
2369 		 */
2370 		udi_size = sizeof (struct T_unitdata_ind) + sizeof (sin6_t);
2371 
2372 		if (recv_ancillary.crb_all != 0) {
2373 			udi_size += conn_recvancillary_size(connp,
2374 			    recv_ancillary, ira, mp, &ipps);
2375 		}
2376 
2377 		mp1 = allocb(udi_size, BPRI_MED);
2378 		if (mp1 == NULL) {
2379 			freemsg(mp);
2380 			BUMP_MIB(&us->us_udp_mib, udpInErrors);
2381 			return;
2382 		}
2383 		mp1->b_cont = mp;
2384 		mp1->b_datap->db_type = M_PROTO;
2385 		tudi = (struct T_unitdata_ind *)mp1->b_rptr;
2386 		mp1->b_wptr = (uchar_t *)tudi + udi_size;
2387 		tudi->PRIM_type = T_UNITDATA_IND;
2388 		tudi->SRC_length = sizeof (sin6_t);
2389 		tudi->SRC_offset = sizeof (struct T_unitdata_ind);
2390 		tudi->OPT_offset = sizeof (struct T_unitdata_ind) +
2391 		    sizeof (sin6_t);
2392 		udi_size -= (sizeof (struct T_unitdata_ind) + sizeof (sin6_t));
2393 		tudi->OPT_length = udi_size;
2394 		sin6 = (sin6_t *)&tudi[1];
2395 		if (ira->ira_flags & IRAF_IS_IPV4) {
2396 			in6_addr_t v6dst;
2397 
2398 			IN6_IPADDR_TO_V4MAPPED(((ipha_t *)rptr)->ipha_src,
2399 			    &sin6->sin6_addr);
2400 			IN6_IPADDR_TO_V4MAPPED(((ipha_t *)rptr)->ipha_dst,
2401 			    &v6dst);
2402 			sin6->sin6_flowinfo = 0;
2403 			sin6->sin6_scope_id = 0;
2404 			sin6->__sin6_src_id = ip_srcid_find_addr(&v6dst,
2405 			    IPCL_ZONEID(connp), us->us_netstack);
2406 		} else {
2407 			ip6h = (ip6_t *)rptr;
2408 
2409 			sin6->sin6_addr = ip6h->ip6_src;
2410 			/* No sin6_flowinfo per API */
2411 			sin6->sin6_flowinfo = 0;
2412 			/* For link-scope pass up scope id */
2413 			if (IN6_IS_ADDR_LINKSCOPE(&ip6h->ip6_src))
2414 				sin6->sin6_scope_id = ira->ira_ruifindex;
2415 			else
2416 				sin6->sin6_scope_id = 0;
2417 			sin6->__sin6_src_id = ip_srcid_find_addr(
2418 			    &ip6h->ip6_dst, IPCL_ZONEID(connp),
2419 			    us->us_netstack);
2420 		}
2421 		sin6->sin6_port = udpha->uha_src_port;
2422 		sin6->sin6_family = connp->conn_family;
2423 
2424 		if (udi_size != 0) {
2425 			conn_recvancillary_add(connp, recv_ancillary, ira,
2426 			    &ipps, (uchar_t *)&sin6[1], udi_size);
2427 		}
2428 	}
2429 
2430 	/*
2431 	 * DTrace this UDP input as udp:::receive (this is for IPv4, IPv6 and
2432 	 * loopback traffic).
2433 	 */
2434 	DTRACE_UDP5(receive, mblk_t *, NULL, ip_xmit_attr_t *, connp->conn_ixa,
2435 	    void_ip_t *, rptr, udp_t *, udp, udpha_t *, udpha);
2436 
2437 	/* Walk past the headers unless IP_RECVHDR was set. */
2438 	if (!udp->udp_rcvhdr) {
2439 		mp->b_rptr = rptr + hdr_length;
2440 		pkt_len -= hdr_length;
2441 	}
2442 
2443 	BUMP_MIB(&us->us_udp_mib, udpHCInDatagrams);
2444 	udp_ulp_recv(connp, mp1, pkt_len, ira);
2445 	return;
2446 
2447 tossit:
2448 	freemsg(mp);
2449 	BUMP_MIB(&us->us_udp_mib, udpInErrors);
2450 }
2451 
2452 /*
2453  * return SNMP stuff in buffer in mpdata. We don't hold any lock and report
2454  * information that can be changing beneath us.
2455  */
2456 mblk_t *
2457 udp_snmp_get(queue_t *q, mblk_t *mpctl)
2458 {
2459 	mblk_t			*mpdata;
2460 	mblk_t			*mp_conn_ctl;
2461 	mblk_t			*mp_attr_ctl;
2462 	mblk_t			*mp6_conn_ctl;
2463 	mblk_t			*mp6_attr_ctl;
2464 	mblk_t			*mp_conn_tail;
2465 	mblk_t			*mp_attr_tail;
2466 	mblk_t			*mp6_conn_tail;
2467 	mblk_t			*mp6_attr_tail;
2468 	struct opthdr		*optp;
2469 	mib2_udpEntry_t		ude;
2470 	mib2_udp6Entry_t	ude6;
2471 	mib2_transportMLPEntry_t mlp;
2472 	int			state;
2473 	zoneid_t		zoneid;
2474 	int			i;
2475 	connf_t			*connfp;
2476 	conn_t			*connp = Q_TO_CONN(q);
2477 	int			v4_conn_idx;
2478 	int			v6_conn_idx;
2479 	boolean_t		needattr;
2480 	udp_t			*udp;
2481 	ip_stack_t		*ipst = connp->conn_netstack->netstack_ip;
2482 	udp_stack_t		*us = connp->conn_netstack->netstack_udp;
2483 	mblk_t			*mp2ctl;
2484 
2485 	/*
2486 	 * make a copy of the original message
2487 	 */
2488 	mp2ctl = copymsg(mpctl);
2489 
2490 	mp_conn_ctl = mp_attr_ctl = mp6_conn_ctl = NULL;
2491 	if (mpctl == NULL ||
2492 	    (mpdata = mpctl->b_cont) == NULL ||
2493 	    (mp_conn_ctl = copymsg(mpctl)) == NULL ||
2494 	    (mp_attr_ctl = copymsg(mpctl)) == NULL ||
2495 	    (mp6_conn_ctl = copymsg(mpctl)) == NULL ||
2496 	    (mp6_attr_ctl = copymsg(mpctl)) == NULL) {
2497 		freemsg(mp_conn_ctl);
2498 		freemsg(mp_attr_ctl);
2499 		freemsg(mp6_conn_ctl);
2500 		freemsg(mpctl);
2501 		freemsg(mp2ctl);
2502 		return (0);
2503 	}
2504 
2505 	zoneid = connp->conn_zoneid;
2506 
2507 	/* fixed length structure for IPv4 and IPv6 counters */
2508 	SET_MIB(us->us_udp_mib.udpEntrySize, sizeof (mib2_udpEntry_t));
2509 	SET_MIB(us->us_udp_mib.udp6EntrySize, sizeof (mib2_udp6Entry_t));
2510 	/* synchronize 64- and 32-bit counters */
2511 	SYNC32_MIB(&us->us_udp_mib, udpInDatagrams, udpHCInDatagrams);
2512 	SYNC32_MIB(&us->us_udp_mib, udpOutDatagrams, udpHCOutDatagrams);
2513 
2514 	optp = (struct opthdr *)&mpctl->b_rptr[sizeof (struct T_optmgmt_ack)];
2515 	optp->level = MIB2_UDP;
2516 	optp->name = 0;
2517 	(void) snmp_append_data(mpdata, (char *)&us->us_udp_mib,
2518 	    sizeof (us->us_udp_mib));
2519 	optp->len = msgdsize(mpdata);
2520 	qreply(q, mpctl);
2521 
2522 	mp_conn_tail = mp_attr_tail = mp6_conn_tail = mp6_attr_tail = NULL;
2523 	v4_conn_idx = v6_conn_idx = 0;
2524 
2525 	for (i = 0; i < CONN_G_HASH_SIZE; i++) {
2526 		connfp = &ipst->ips_ipcl_globalhash_fanout[i];
2527 		connp = NULL;
2528 
2529 		while ((connp = ipcl_get_next_conn(connfp, connp,
2530 		    IPCL_UDPCONN))) {
2531 			udp = connp->conn_udp;
2532 			if (zoneid != connp->conn_zoneid)
2533 				continue;
2534 
2535 			/*
2536 			 * Note that the port numbers are sent in
2537 			 * host byte order
2538 			 */
2539 
2540 			if (udp->udp_state == TS_UNBND)
2541 				state = MIB2_UDP_unbound;
2542 			else if (udp->udp_state == TS_IDLE)
2543 				state = MIB2_UDP_idle;
2544 			else if (udp->udp_state == TS_DATA_XFER)
2545 				state = MIB2_UDP_connected;
2546 			else
2547 				state = MIB2_UDP_unknown;
2548 
2549 			needattr = B_FALSE;
2550 			bzero(&mlp, sizeof (mlp));
2551 			if (connp->conn_mlp_type != mlptSingle) {
2552 				if (connp->conn_mlp_type == mlptShared ||
2553 				    connp->conn_mlp_type == mlptBoth)
2554 					mlp.tme_flags |= MIB2_TMEF_SHARED;
2555 				if (connp->conn_mlp_type == mlptPrivate ||
2556 				    connp->conn_mlp_type == mlptBoth)
2557 					mlp.tme_flags |= MIB2_TMEF_PRIVATE;
2558 				needattr = B_TRUE;
2559 			}
2560 			if (connp->conn_anon_mlp) {
2561 				mlp.tme_flags |= MIB2_TMEF_ANONMLP;
2562 				needattr = B_TRUE;
2563 			}
2564 			switch (connp->conn_mac_mode) {
2565 			case CONN_MAC_DEFAULT:
2566 				break;
2567 			case CONN_MAC_AWARE:
2568 				mlp.tme_flags |= MIB2_TMEF_MACEXEMPT;
2569 				needattr = B_TRUE;
2570 				break;
2571 			case CONN_MAC_IMPLICIT:
2572 				mlp.tme_flags |= MIB2_TMEF_MACIMPLICIT;
2573 				needattr = B_TRUE;
2574 				break;
2575 			}
2576 			mutex_enter(&connp->conn_lock);
2577 			if (udp->udp_state == TS_DATA_XFER &&
2578 			    connp->conn_ixa->ixa_tsl != NULL) {
2579 				ts_label_t *tsl;
2580 
2581 				tsl = connp->conn_ixa->ixa_tsl;
2582 				mlp.tme_flags |= MIB2_TMEF_IS_LABELED;
2583 				mlp.tme_doi = label2doi(tsl);
2584 				mlp.tme_label = *label2bslabel(tsl);
2585 				needattr = B_TRUE;
2586 			}
2587 			mutex_exit(&connp->conn_lock);
2588 
2589 			/*
2590 			 * Create an IPv4 table entry for IPv4 entries and also
2591 			 * any IPv6 entries which are bound to in6addr_any
2592 			 * (i.e. anything a IPv4 peer could connect/send to).
2593 			 */
2594 			if (connp->conn_ipversion == IPV4_VERSION ||
2595 			    (udp->udp_state <= TS_IDLE &&
2596 			    IN6_IS_ADDR_UNSPECIFIED(&connp->conn_laddr_v6))) {
2597 				ude.udpEntryInfo.ue_state = state;
2598 				/*
2599 				 * If in6addr_any this will set it to
2600 				 * INADDR_ANY
2601 				 */
2602 				ude.udpLocalAddress = connp->conn_laddr_v4;
2603 				ude.udpLocalPort = ntohs(connp->conn_lport);
2604 				if (udp->udp_state == TS_DATA_XFER) {
2605 					/*
2606 					 * Can potentially get here for
2607 					 * v6 socket if another process
2608 					 * (say, ping) has just done a
2609 					 * sendto(), changing the state
2610 					 * from the TS_IDLE above to
2611 					 * TS_DATA_XFER by the time we hit
2612 					 * this part of the code.
2613 					 */
2614 					ude.udpEntryInfo.ue_RemoteAddress =
2615 					    connp->conn_faddr_v4;
2616 					ude.udpEntryInfo.ue_RemotePort =
2617 					    ntohs(connp->conn_fport);
2618 				} else {
2619 					ude.udpEntryInfo.ue_RemoteAddress = 0;
2620 					ude.udpEntryInfo.ue_RemotePort = 0;
2621 				}
2622 
2623 				/*
2624 				 * We make the assumption that all udp_t
2625 				 * structs will be created within an address
2626 				 * region no larger than 32-bits.
2627 				 */
2628 				ude.udpInstance = (uint32_t)(uintptr_t)udp;
2629 				ude.udpCreationProcess =
2630 				    (connp->conn_cpid < 0) ?
2631 				    MIB2_UNKNOWN_PROCESS :
2632 				    connp->conn_cpid;
2633 				ude.udpCreationTime = connp->conn_open_time;
2634 
2635 				(void) snmp_append_data2(mp_conn_ctl->b_cont,
2636 				    &mp_conn_tail, (char *)&ude, sizeof (ude));
2637 				mlp.tme_connidx = v4_conn_idx++;
2638 				if (needattr)
2639 					(void) snmp_append_data2(
2640 					    mp_attr_ctl->b_cont, &mp_attr_tail,
2641 					    (char *)&mlp, sizeof (mlp));
2642 			}
2643 			if (connp->conn_ipversion == IPV6_VERSION) {
2644 				ude6.udp6EntryInfo.ue_state  = state;
2645 				ude6.udp6LocalAddress = connp->conn_laddr_v6;
2646 				ude6.udp6LocalPort = ntohs(connp->conn_lport);
2647 				mutex_enter(&connp->conn_lock);
2648 				if (connp->conn_ixa->ixa_flags &
2649 				    IXAF_SCOPEID_SET) {
2650 					ude6.udp6IfIndex =
2651 					    connp->conn_ixa->ixa_scopeid;
2652 				} else {
2653 					ude6.udp6IfIndex = connp->conn_bound_if;
2654 				}
2655 				mutex_exit(&connp->conn_lock);
2656 				if (udp->udp_state == TS_DATA_XFER) {
2657 					ude6.udp6EntryInfo.ue_RemoteAddress =
2658 					    connp->conn_faddr_v6;
2659 					ude6.udp6EntryInfo.ue_RemotePort =
2660 					    ntohs(connp->conn_fport);
2661 				} else {
2662 					ude6.udp6EntryInfo.ue_RemoteAddress =
2663 					    sin6_null.sin6_addr;
2664 					ude6.udp6EntryInfo.ue_RemotePort = 0;
2665 				}
2666 				/*
2667 				 * We make the assumption that all udp_t
2668 				 * structs will be created within an address
2669 				 * region no larger than 32-bits.
2670 				 */
2671 				ude6.udp6Instance = (uint32_t)(uintptr_t)udp;
2672 				ude6.udp6CreationProcess =
2673 				    (connp->conn_cpid < 0) ?
2674 				    MIB2_UNKNOWN_PROCESS :
2675 				    connp->conn_cpid;
2676 				ude6.udp6CreationTime = connp->conn_open_time;
2677 
2678 				(void) snmp_append_data2(mp6_conn_ctl->b_cont,
2679 				    &mp6_conn_tail, (char *)&ude6,
2680 				    sizeof (ude6));
2681 				mlp.tme_connidx = v6_conn_idx++;
2682 				if (needattr)
2683 					(void) snmp_append_data2(
2684 					    mp6_attr_ctl->b_cont,
2685 					    &mp6_attr_tail, (char *)&mlp,
2686 					    sizeof (mlp));
2687 			}
2688 		}
2689 	}
2690 
2691 	/* IPv4 UDP endpoints */
2692 	optp = (struct opthdr *)&mp_conn_ctl->b_rptr[
2693 	    sizeof (struct T_optmgmt_ack)];
2694 	optp->level = MIB2_UDP;
2695 	optp->name = MIB2_UDP_ENTRY;
2696 	optp->len = msgdsize(mp_conn_ctl->b_cont);
2697 	qreply(q, mp_conn_ctl);
2698 
2699 	/* table of MLP attributes... */
2700 	optp = (struct opthdr *)&mp_attr_ctl->b_rptr[
2701 	    sizeof (struct T_optmgmt_ack)];
2702 	optp->level = MIB2_UDP;
2703 	optp->name = EXPER_XPORT_MLP;
2704 	optp->len = msgdsize(mp_attr_ctl->b_cont);
2705 	if (optp->len == 0)
2706 		freemsg(mp_attr_ctl);
2707 	else
2708 		qreply(q, mp_attr_ctl);
2709 
2710 	/* IPv6 UDP endpoints */
2711 	optp = (struct opthdr *)&mp6_conn_ctl->b_rptr[
2712 	    sizeof (struct T_optmgmt_ack)];
2713 	optp->level = MIB2_UDP6;
2714 	optp->name = MIB2_UDP6_ENTRY;
2715 	optp->len = msgdsize(mp6_conn_ctl->b_cont);
2716 	qreply(q, mp6_conn_ctl);
2717 
2718 	/* table of MLP attributes... */
2719 	optp = (struct opthdr *)&mp6_attr_ctl->b_rptr[
2720 	    sizeof (struct T_optmgmt_ack)];
2721 	optp->level = MIB2_UDP6;
2722 	optp->name = EXPER_XPORT_MLP;
2723 	optp->len = msgdsize(mp6_attr_ctl->b_cont);
2724 	if (optp->len == 0)
2725 		freemsg(mp6_attr_ctl);
2726 	else
2727 		qreply(q, mp6_attr_ctl);
2728 
2729 	return (mp2ctl);
2730 }
2731 
2732 /*
2733  * Return 0 if invalid set request, 1 otherwise, including non-udp requests.
2734  * NOTE: Per MIB-II, UDP has no writable data.
2735  * TODO:  If this ever actually tries to set anything, it needs to be
2736  * to do the appropriate locking.
2737  */
2738 /* ARGSUSED */
2739 int
2740 udp_snmp_set(queue_t *q, t_scalar_t level, t_scalar_t name,
2741     uchar_t *ptr, int len)
2742 {
2743 	switch (level) {
2744 	case MIB2_UDP:
2745 		return (0);
2746 	default:
2747 		return (1);
2748 	}
2749 }
2750 
2751 /*
2752  * This routine creates a T_UDERROR_IND message and passes it upstream.
2753  * The address and options are copied from the T_UNITDATA_REQ message
2754  * passed in mp.  This message is freed.
2755  */
2756 static void
2757 udp_ud_err(queue_t *q, mblk_t *mp, t_scalar_t err)
2758 {
2759 	struct T_unitdata_req *tudr;
2760 	mblk_t	*mp1;
2761 	uchar_t *destaddr;
2762 	t_scalar_t destlen;
2763 	uchar_t	*optaddr;
2764 	t_scalar_t optlen;
2765 
2766 	if ((mp->b_wptr < mp->b_rptr) ||
2767 	    (MBLKL(mp)) < sizeof (struct T_unitdata_req)) {
2768 		goto done;
2769 	}
2770 	tudr = (struct T_unitdata_req *)mp->b_rptr;
2771 	destaddr = mp->b_rptr + tudr->DEST_offset;
2772 	if (destaddr < mp->b_rptr || destaddr >= mp->b_wptr ||
2773 	    destaddr + tudr->DEST_length < mp->b_rptr ||
2774 	    destaddr + tudr->DEST_length > mp->b_wptr) {
2775 		goto done;
2776 	}
2777 	optaddr = mp->b_rptr + tudr->OPT_offset;
2778 	if (optaddr < mp->b_rptr || optaddr >= mp->b_wptr ||
2779 	    optaddr + tudr->OPT_length < mp->b_rptr ||
2780 	    optaddr + tudr->OPT_length > mp->b_wptr) {
2781 		goto done;
2782 	}
2783 	destlen = tudr->DEST_length;
2784 	optlen = tudr->OPT_length;
2785 
2786 	mp1 = mi_tpi_uderror_ind((char *)destaddr, destlen,
2787 	    (char *)optaddr, optlen, err);
2788 	if (mp1 != NULL)
2789 		qreply(q, mp1);
2790 
2791 done:
2792 	freemsg(mp);
2793 }
2794 
2795 /*
2796  * This routine removes a port number association from a stream.  It
2797  * is called by udp_wput to handle T_UNBIND_REQ messages.
2798  */
2799 static void
2800 udp_tpi_unbind(queue_t *q, mblk_t *mp)
2801 {
2802 	conn_t	*connp = Q_TO_CONN(q);
2803 	int	error;
2804 
2805 	error = udp_do_unbind(connp);
2806 	if (error) {
2807 		if (error < 0)
2808 			udp_err_ack(q, mp, -error, 0);
2809 		else
2810 			udp_err_ack(q, mp, TSYSERR, error);
2811 		return;
2812 	}
2813 
2814 	mp = mi_tpi_ok_ack_alloc(mp);
2815 	ASSERT(mp != NULL);
2816 	ASSERT(((struct T_ok_ack *)mp->b_rptr)->PRIM_type == T_OK_ACK);
2817 	qreply(q, mp);
2818 }
2819 
2820 /*
2821  * Don't let port fall into the privileged range.
2822  * Since the extra privileged ports can be arbitrary we also
2823  * ensure that we exclude those from consideration.
2824  * us->us_epriv_ports is not sorted thus we loop over it until
2825  * there are no changes.
2826  */
2827 static in_port_t
2828 udp_update_next_port(udp_t *udp, in_port_t port, boolean_t random)
2829 {
2830 	int i;
2831 	in_port_t nextport;
2832 	boolean_t restart = B_FALSE;
2833 	udp_stack_t *us = udp->udp_us;
2834 
2835 	if (random && udp_random_anon_port != 0) {
2836 		(void) random_get_pseudo_bytes((uint8_t *)&port,
2837 		    sizeof (in_port_t));
2838 		/*
2839 		 * Unless changed by a sys admin, the smallest anon port
2840 		 * is 32768 and the largest anon port is 65535.  It is
2841 		 * very likely (50%) for the random port to be smaller
2842 		 * than the smallest anon port.  When that happens,
2843 		 * add port % (anon port range) to the smallest anon
2844 		 * port to get the random port.  It should fall into the
2845 		 * valid anon port range.
2846 		 */
2847 		if (port < us->us_smallest_anon_port) {
2848 			port = us->us_smallest_anon_port +
2849 			    port % (us->us_largest_anon_port -
2850 			    us->us_smallest_anon_port);
2851 		}
2852 	}
2853 
2854 retry:
2855 	if (port < us->us_smallest_anon_port)
2856 		port = us->us_smallest_anon_port;
2857 
2858 	if (port > us->us_largest_anon_port) {
2859 		port = us->us_smallest_anon_port;
2860 		if (restart)
2861 			return (0);
2862 		restart = B_TRUE;
2863 	}
2864 
2865 	if (port < us->us_smallest_nonpriv_port)
2866 		port = us->us_smallest_nonpriv_port;
2867 
2868 	for (i = 0; i < us->us_num_epriv_ports; i++) {
2869 		if (port == us->us_epriv_ports[i]) {
2870 			port++;
2871 			/*
2872 			 * Make sure that the port is in the
2873 			 * valid range.
2874 			 */
2875 			goto retry;
2876 		}
2877 	}
2878 
2879 	if (is_system_labeled() &&
2880 	    (nextport = tsol_next_port(crgetzone(udp->udp_connp->conn_cred),
2881 	    port, IPPROTO_UDP, B_TRUE)) != 0) {
2882 		port = nextport;
2883 		goto retry;
2884 	}
2885 
2886 	return (port);
2887 }
2888 
2889 /*
2890  * Handle T_UNITDATA_REQ with options. Both IPv4 and IPv6
2891  * Either tudr_mp or msg is set. If tudr_mp we take ancillary data from
2892  * the TPI options, otherwise we take them from msg_control.
2893  * If both sin and sin6 is set it is a connected socket and we use conn_faddr.
2894  * Always consumes mp; never consumes tudr_mp.
2895  */
2896 static int
2897 udp_output_ancillary(conn_t *connp, sin_t *sin, sin6_t *sin6, mblk_t *mp,
2898     mblk_t *tudr_mp, struct nmsghdr *msg, cred_t *cr, pid_t pid)
2899 {
2900 	udp_t		*udp = connp->conn_udp;
2901 	udp_stack_t	*us = udp->udp_us;
2902 	int		error;
2903 	ip_xmit_attr_t	*ixa;
2904 	ip_pkt_t	*ipp;
2905 	in6_addr_t	v6src;
2906 	in6_addr_t	v6dst;
2907 	in6_addr_t	v6nexthop;
2908 	in_port_t	dstport;
2909 	uint32_t	flowinfo;
2910 	uint_t		srcid;
2911 	int		is_absreq_failure = 0;
2912 	conn_opt_arg_t	coas, *coa;
2913 
2914 	ASSERT(tudr_mp != NULL || msg != NULL);
2915 
2916 	/*
2917 	 * Get ixa before checking state to handle a disconnect race.
2918 	 *
2919 	 * We need an exclusive copy of conn_ixa since the ancillary data
2920 	 * options might modify it. That copy has no pointers hence we
2921 	 * need to set them up once we've parsed the ancillary data.
2922 	 */
2923 	ixa = conn_get_ixa_exclusive(connp);
2924 	if (ixa == NULL) {
2925 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
2926 		freemsg(mp);
2927 		return (ENOMEM);
2928 	}
2929 	ASSERT(cr != NULL);
2930 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
2931 	ixa->ixa_cred = cr;
2932 	ixa->ixa_cpid = pid;
2933 	if (is_system_labeled()) {
2934 		/* We need to restart with a label based on the cred */
2935 		ip_xmit_attr_restore_tsl(ixa, ixa->ixa_cred);
2936 	}
2937 
2938 	/* In case previous destination was multicast or multirt */
2939 	ip_attr_newdst(ixa);
2940 
2941 	/* Get a copy of conn_xmit_ipp since the options might change it */
2942 	ipp = kmem_zalloc(sizeof (*ipp), KM_NOSLEEP);
2943 	if (ipp == NULL) {
2944 		ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
2945 		ixa->ixa_cred = connp->conn_cred;	/* Restore */
2946 		ixa->ixa_cpid = connp->conn_cpid;
2947 		ixa_refrele(ixa);
2948 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
2949 		freemsg(mp);
2950 		return (ENOMEM);
2951 	}
2952 	mutex_enter(&connp->conn_lock);
2953 	error = ip_pkt_copy(&connp->conn_xmit_ipp, ipp, KM_NOSLEEP);
2954 	mutex_exit(&connp->conn_lock);
2955 	if (error != 0) {
2956 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
2957 		freemsg(mp);
2958 		goto done;
2959 	}
2960 
2961 	/*
2962 	 * Parse the options and update ixa and ipp as a result.
2963 	 * Note that ixa_tsl can be updated if SCM_UCRED.
2964 	 * ixa_refrele/ixa_inactivate will release any reference on ixa_tsl.
2965 	 */
2966 
2967 	coa = &coas;
2968 	coa->coa_connp = connp;
2969 	coa->coa_ixa = ixa;
2970 	coa->coa_ipp = ipp;
2971 	coa->coa_ancillary = B_TRUE;
2972 	coa->coa_changed = 0;
2973 
2974 	if (msg != NULL) {
2975 		error = process_auxiliary_options(connp, msg->msg_control,
2976 		    msg->msg_controllen, coa, &udp_opt_obj, udp_opt_set, cr);
2977 	} else {
2978 		struct T_unitdata_req *tudr;
2979 
2980 		tudr = (struct T_unitdata_req *)tudr_mp->b_rptr;
2981 		ASSERT(tudr->PRIM_type == T_UNITDATA_REQ);
2982 		error = tpi_optcom_buf(connp->conn_wq, tudr_mp,
2983 		    &tudr->OPT_length, tudr->OPT_offset, cr, &udp_opt_obj,
2984 		    coa, &is_absreq_failure);
2985 	}
2986 	if (error != 0) {
2987 		/*
2988 		 * Note: No special action needed in this
2989 		 * module for "is_absreq_failure"
2990 		 */
2991 		freemsg(mp);
2992 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
2993 		goto done;
2994 	}
2995 	ASSERT(is_absreq_failure == 0);
2996 
2997 	mutex_enter(&connp->conn_lock);
2998 	/*
2999 	 * If laddr is unspecified then we look at sin6_src_id.
3000 	 * We will give precedence to a source address set with IPV6_PKTINFO
3001 	 * (aka IPPF_ADDR) but that is handled in build_hdrs. However, we don't
3002 	 * want ip_attr_connect to select a source (since it can fail) when
3003 	 * IPV6_PKTINFO is specified.
3004 	 * If this doesn't result in a source address then we get a source
3005 	 * from ip_attr_connect() below.
3006 	 */
3007 	v6src = connp->conn_saddr_v6;
3008 	if (sin != NULL) {
3009 		IN6_IPADDR_TO_V4MAPPED(sin->sin_addr.s_addr, &v6dst);
3010 		dstport = sin->sin_port;
3011 		flowinfo = 0;
3012 		ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
3013 		ixa->ixa_flags |= IXAF_IS_IPV4;
3014 	} else if (sin6 != NULL) {
3015 		v6dst = sin6->sin6_addr;
3016 		dstport = sin6->sin6_port;
3017 		flowinfo = sin6->sin6_flowinfo;
3018 		srcid = sin6->__sin6_src_id;
3019 		if (IN6_IS_ADDR_LINKSCOPE(&v6dst) && sin6->sin6_scope_id != 0) {
3020 			ixa->ixa_scopeid = sin6->sin6_scope_id;
3021 			ixa->ixa_flags |= IXAF_SCOPEID_SET;
3022 		} else {
3023 			ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
3024 		}
3025 		if (srcid != 0 && IN6_IS_ADDR_UNSPECIFIED(&v6src)) {
3026 			ip_srcid_find_id(srcid, &v6src, IPCL_ZONEID(connp),
3027 			    connp->conn_netstack);
3028 		}
3029 		if (IN6_IS_ADDR_V4MAPPED(&v6dst))
3030 			ixa->ixa_flags |= IXAF_IS_IPV4;
3031 		else
3032 			ixa->ixa_flags &= ~IXAF_IS_IPV4;
3033 	} else {
3034 		/* Connected case */
3035 		v6dst = connp->conn_faddr_v6;
3036 		dstport = connp->conn_fport;
3037 		flowinfo = connp->conn_flowinfo;
3038 	}
3039 	mutex_exit(&connp->conn_lock);
3040 
3041 	/* Handle IP_PKTINFO/IPV6_PKTINFO setting source address. */
3042 	if (ipp->ipp_fields & IPPF_ADDR) {
3043 		if (ixa->ixa_flags & IXAF_IS_IPV4) {
3044 			if (IN6_IS_ADDR_V4MAPPED(&ipp->ipp_addr))
3045 				v6src = ipp->ipp_addr;
3046 		} else {
3047 			if (!IN6_IS_ADDR_V4MAPPED(&ipp->ipp_addr))
3048 				v6src = ipp->ipp_addr;
3049 		}
3050 	}
3051 
3052 	ip_attr_nexthop(ipp, ixa, &v6dst, &v6nexthop);
3053 	error = ip_attr_connect(connp, ixa, &v6src, &v6dst, &v6nexthop, dstport,
3054 	    &v6src, NULL, IPDF_ALLOW_MCBC | IPDF_VERIFY_DST | IPDF_IPSEC);
3055 
3056 	switch (error) {
3057 	case 0:
3058 		break;
3059 	case EADDRNOTAVAIL:
3060 		/*
3061 		 * IXAF_VERIFY_SOURCE tells us to pick a better source.
3062 		 * Don't have the application see that errno
3063 		 */
3064 		error = ENETUNREACH;
3065 		goto failed;
3066 	case ENETDOWN:
3067 		/*
3068 		 * Have !ipif_addr_ready address; drop packet silently
3069 		 * until we can get applications to not send until we
3070 		 * are ready.
3071 		 */
3072 		error = 0;
3073 		goto failed;
3074 	case EHOSTUNREACH:
3075 	case ENETUNREACH:
3076 		if (ixa->ixa_ire != NULL) {
3077 			/*
3078 			 * Let conn_ip_output/ire_send_noroute return
3079 			 * the error and send any local ICMP error.
3080 			 */
3081 			error = 0;
3082 			break;
3083 		}
3084 		/* FALLTHRU */
3085 	default:
3086 	failed:
3087 		freemsg(mp);
3088 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3089 		goto done;
3090 	}
3091 
3092 	/*
3093 	 * We might be going to a different destination than last time,
3094 	 * thus check that TX allows the communication and compute any
3095 	 * needed label.
3096 	 *
3097 	 * TSOL Note: We have an exclusive ipp and ixa for this thread so we
3098 	 * don't have to worry about concurrent threads.
3099 	 */
3100 	if (is_system_labeled()) {
3101 		/* Using UDP MLP requires SCM_UCRED from user */
3102 		if (connp->conn_mlp_type != mlptSingle &&
3103 		    !((ixa->ixa_flags & IXAF_UCRED_TSL))) {
3104 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3105 			error = ECONNREFUSED;
3106 			freemsg(mp);
3107 			goto done;
3108 		}
3109 		/*
3110 		 * Check whether Trusted Solaris policy allows communication
3111 		 * with this host, and pretend that the destination is
3112 		 * unreachable if not.
3113 		 * Compute any needed label and place it in ipp_label_v4/v6.
3114 		 *
3115 		 * Later conn_build_hdr_template/conn_prepend_hdr takes
3116 		 * ipp_label_v4/v6 to form the packet.
3117 		 *
3118 		 * Tsol note: We have ipp structure local to this thread so
3119 		 * no locking is needed.
3120 		 */
3121 		error = conn_update_label(connp, ixa, &v6dst, ipp);
3122 		if (error != 0) {
3123 			freemsg(mp);
3124 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3125 			goto done;
3126 		}
3127 	}
3128 	mp = udp_prepend_hdr(connp, ixa, ipp, &v6src, &v6dst, dstport,
3129 	    flowinfo, mp, &error);
3130 	if (mp == NULL) {
3131 		ASSERT(error != 0);
3132 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3133 		goto done;
3134 	}
3135 	if (ixa->ixa_pktlen > IP_MAXPACKET) {
3136 		error = EMSGSIZE;
3137 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3138 		freemsg(mp);
3139 		goto done;
3140 	}
3141 	/* We're done.  Pass the packet to ip. */
3142 	BUMP_MIB(&us->us_udp_mib, udpHCOutDatagrams);
3143 
3144 	DTRACE_UDP5(send, mblk_t *, NULL, ip_xmit_attr_t *, ixa,
3145 	    void_ip_t *, mp->b_rptr, udp_t *, udp, udpha_t *,
3146 	    &mp->b_rptr[ixa->ixa_ip_hdr_length]);
3147 
3148 	error = conn_ip_output(mp, ixa);
3149 	/* No udpOutErrors if an error since IP increases its error counter */
3150 	switch (error) {
3151 	case 0:
3152 		break;
3153 	case EWOULDBLOCK:
3154 		(void) ixa_check_drain_insert(connp, ixa);
3155 		error = 0;
3156 		break;
3157 	case EADDRNOTAVAIL:
3158 		/*
3159 		 * IXAF_VERIFY_SOURCE tells us to pick a better source.
3160 		 * Don't have the application see that errno
3161 		 */
3162 		error = ENETUNREACH;
3163 		/* FALLTHRU */
3164 	default:
3165 		mutex_enter(&connp->conn_lock);
3166 		/*
3167 		 * Clear the source and v6lastdst so we call ip_attr_connect
3168 		 * for the next packet and try to pick a better source.
3169 		 */
3170 		if (connp->conn_mcbc_bind)
3171 			connp->conn_saddr_v6 = ipv6_all_zeros;
3172 		else
3173 			connp->conn_saddr_v6 = connp->conn_bound_addr_v6;
3174 		connp->conn_v6lastdst = ipv6_all_zeros;
3175 		mutex_exit(&connp->conn_lock);
3176 		break;
3177 	}
3178 done:
3179 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3180 	ixa->ixa_cred = connp->conn_cred;	/* Restore */
3181 	ixa->ixa_cpid = connp->conn_cpid;
3182 	ixa_refrele(ixa);
3183 	ip_pkt_free(ipp);
3184 	kmem_free(ipp, sizeof (*ipp));
3185 	return (error);
3186 }
3187 
3188 /*
3189  * Handle sending an M_DATA for a connected socket.
3190  * Handles both IPv4 and IPv6.
3191  */
3192 static int
3193 udp_output_connected(conn_t *connp, mblk_t *mp, cred_t *cr, pid_t pid)
3194 {
3195 	udp_t		*udp = connp->conn_udp;
3196 	udp_stack_t	*us = udp->udp_us;
3197 	int		error;
3198 	ip_xmit_attr_t	*ixa;
3199 
3200 	/*
3201 	 * If no other thread is using conn_ixa this just gets a reference to
3202 	 * conn_ixa. Otherwise we get a safe copy of conn_ixa.
3203 	 */
3204 	ixa = conn_get_ixa(connp, B_FALSE);
3205 	if (ixa == NULL) {
3206 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3207 		freemsg(mp);
3208 		return (ENOMEM);
3209 	}
3210 
3211 	ASSERT(cr != NULL);
3212 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3213 	ixa->ixa_cred = cr;
3214 	ixa->ixa_cpid = pid;
3215 
3216 	mutex_enter(&connp->conn_lock);
3217 	mp = udp_prepend_header_template(connp, ixa, mp, &connp->conn_saddr_v6,
3218 	    connp->conn_fport, connp->conn_flowinfo, &error);
3219 
3220 	if (mp == NULL) {
3221 		ASSERT(error != 0);
3222 		mutex_exit(&connp->conn_lock);
3223 		ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3224 		ixa->ixa_cred = connp->conn_cred;	/* Restore */
3225 		ixa->ixa_cpid = connp->conn_cpid;
3226 		ixa_refrele(ixa);
3227 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3228 		freemsg(mp);
3229 		return (error);
3230 	}
3231 
3232 	/*
3233 	 * In case we got a safe copy of conn_ixa, or if opt_set made us a new
3234 	 * safe copy, then we need to fill in any pointers in it.
3235 	 */
3236 	if (ixa->ixa_ire == NULL) {
3237 		in6_addr_t	faddr, saddr;
3238 		in6_addr_t	nexthop;
3239 		in_port_t	fport;
3240 
3241 		saddr = connp->conn_saddr_v6;
3242 		faddr = connp->conn_faddr_v6;
3243 		fport = connp->conn_fport;
3244 		ip_attr_nexthop(&connp->conn_xmit_ipp, ixa, &faddr, &nexthop);
3245 		mutex_exit(&connp->conn_lock);
3246 
3247 		error = ip_attr_connect(connp, ixa, &saddr, &faddr, &nexthop,
3248 		    fport, NULL, NULL, IPDF_ALLOW_MCBC | IPDF_VERIFY_DST |
3249 		    IPDF_IPSEC);
3250 		switch (error) {
3251 		case 0:
3252 			break;
3253 		case EADDRNOTAVAIL:
3254 			/*
3255 			 * IXAF_VERIFY_SOURCE tells us to pick a better source.
3256 			 * Don't have the application see that errno
3257 			 */
3258 			error = ENETUNREACH;
3259 			goto failed;
3260 		case ENETDOWN:
3261 			/*
3262 			 * Have !ipif_addr_ready address; drop packet silently
3263 			 * until we can get applications to not send until we
3264 			 * are ready.
3265 			 */
3266 			error = 0;
3267 			goto failed;
3268 		case EHOSTUNREACH:
3269 		case ENETUNREACH:
3270 			if (ixa->ixa_ire != NULL) {
3271 				/*
3272 				 * Let conn_ip_output/ire_send_noroute return
3273 				 * the error and send any local ICMP error.
3274 				 */
3275 				error = 0;
3276 				break;
3277 			}
3278 			/* FALLTHRU */
3279 		default:
3280 		failed:
3281 			ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3282 			ixa->ixa_cred = connp->conn_cred;	/* Restore */
3283 			ixa->ixa_cpid = connp->conn_cpid;
3284 			ixa_refrele(ixa);
3285 			freemsg(mp);
3286 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3287 			return (error);
3288 		}
3289 	} else {
3290 		/* Done with conn_t */
3291 		mutex_exit(&connp->conn_lock);
3292 	}
3293 	ASSERT(ixa->ixa_ire != NULL);
3294 
3295 	/* We're done.  Pass the packet to ip. */
3296 	BUMP_MIB(&us->us_udp_mib, udpHCOutDatagrams);
3297 
3298 	DTRACE_UDP5(send, mblk_t *, NULL, ip_xmit_attr_t *, ixa,
3299 	    void_ip_t *, mp->b_rptr, udp_t *, udp, udpha_t *,
3300 	    &mp->b_rptr[ixa->ixa_ip_hdr_length]);
3301 
3302 	error = conn_ip_output(mp, ixa);
3303 	/* No udpOutErrors if an error since IP increases its error counter */
3304 	switch (error) {
3305 	case 0:
3306 		break;
3307 	case EWOULDBLOCK:
3308 		(void) ixa_check_drain_insert(connp, ixa);
3309 		error = 0;
3310 		break;
3311 	case EADDRNOTAVAIL:
3312 		/*
3313 		 * IXAF_VERIFY_SOURCE tells us to pick a better source.
3314 		 * Don't have the application see that errno
3315 		 */
3316 		error = ENETUNREACH;
3317 		break;
3318 	}
3319 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3320 	ixa->ixa_cred = connp->conn_cred;	/* Restore */
3321 	ixa->ixa_cpid = connp->conn_cpid;
3322 	ixa_refrele(ixa);
3323 	return (error);
3324 }
3325 
3326 /*
3327  * Handle sending an M_DATA to the last destination.
3328  * Handles both IPv4 and IPv6.
3329  *
3330  * NOTE: The caller must hold conn_lock and we drop it here.
3331  */
3332 static int
3333 udp_output_lastdst(conn_t *connp, mblk_t *mp, cred_t *cr, pid_t pid,
3334     ip_xmit_attr_t *ixa)
3335 {
3336 	udp_t		*udp = connp->conn_udp;
3337 	udp_stack_t	*us = udp->udp_us;
3338 	int		error;
3339 
3340 	ASSERT(MUTEX_HELD(&connp->conn_lock));
3341 	ASSERT(ixa != NULL);
3342 
3343 	ASSERT(cr != NULL);
3344 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3345 	ixa->ixa_cred = cr;
3346 	ixa->ixa_cpid = pid;
3347 
3348 	mp = udp_prepend_header_template(connp, ixa, mp, &connp->conn_v6lastsrc,
3349 	    connp->conn_lastdstport, connp->conn_lastflowinfo, &error);
3350 
3351 	if (mp == NULL) {
3352 		ASSERT(error != 0);
3353 		mutex_exit(&connp->conn_lock);
3354 		ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3355 		ixa->ixa_cred = connp->conn_cred;	/* Restore */
3356 		ixa->ixa_cpid = connp->conn_cpid;
3357 		ixa_refrele(ixa);
3358 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3359 		freemsg(mp);
3360 		return (error);
3361 	}
3362 
3363 	/*
3364 	 * In case we got a safe copy of conn_ixa, or if opt_set made us a new
3365 	 * safe copy, then we need to fill in any pointers in it.
3366 	 */
3367 	if (ixa->ixa_ire == NULL) {
3368 		in6_addr_t	lastdst, lastsrc;
3369 		in6_addr_t	nexthop;
3370 		in_port_t	lastport;
3371 
3372 		lastsrc = connp->conn_v6lastsrc;
3373 		lastdst = connp->conn_v6lastdst;
3374 		lastport = connp->conn_lastdstport;
3375 		ip_attr_nexthop(&connp->conn_xmit_ipp, ixa, &lastdst, &nexthop);
3376 		mutex_exit(&connp->conn_lock);
3377 
3378 		error = ip_attr_connect(connp, ixa, &lastsrc, &lastdst,
3379 		    &nexthop, lastport, NULL, NULL, IPDF_ALLOW_MCBC |
3380 		    IPDF_VERIFY_DST | IPDF_IPSEC);
3381 		switch (error) {
3382 		case 0:
3383 			break;
3384 		case EADDRNOTAVAIL:
3385 			/*
3386 			 * IXAF_VERIFY_SOURCE tells us to pick a better source.
3387 			 * Don't have the application see that errno
3388 			 */
3389 			error = ENETUNREACH;
3390 			goto failed;
3391 		case ENETDOWN:
3392 			/*
3393 			 * Have !ipif_addr_ready address; drop packet silently
3394 			 * until we can get applications to not send until we
3395 			 * are ready.
3396 			 */
3397 			error = 0;
3398 			goto failed;
3399 		case EHOSTUNREACH:
3400 		case ENETUNREACH:
3401 			if (ixa->ixa_ire != NULL) {
3402 				/*
3403 				 * Let conn_ip_output/ire_send_noroute return
3404 				 * the error and send any local ICMP error.
3405 				 */
3406 				error = 0;
3407 				break;
3408 			}
3409 			/* FALLTHRU */
3410 		default:
3411 		failed:
3412 			ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3413 			ixa->ixa_cred = connp->conn_cred;	/* Restore */
3414 			ixa->ixa_cpid = connp->conn_cpid;
3415 			ixa_refrele(ixa);
3416 			freemsg(mp);
3417 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3418 			return (error);
3419 		}
3420 	} else {
3421 		/* Done with conn_t */
3422 		mutex_exit(&connp->conn_lock);
3423 	}
3424 
3425 	/* We're done.  Pass the packet to ip. */
3426 	BUMP_MIB(&us->us_udp_mib, udpHCOutDatagrams);
3427 
3428 	DTRACE_UDP5(send, mblk_t *, NULL, ip_xmit_attr_t *, ixa,
3429 	    void_ip_t *, mp->b_rptr, udp_t *, udp, udpha_t *,
3430 	    &mp->b_rptr[ixa->ixa_ip_hdr_length]);
3431 
3432 	error = conn_ip_output(mp, ixa);
3433 	/* No udpOutErrors if an error since IP increases its error counter */
3434 	switch (error) {
3435 	case 0:
3436 		break;
3437 	case EWOULDBLOCK:
3438 		(void) ixa_check_drain_insert(connp, ixa);
3439 		error = 0;
3440 		break;
3441 	case EADDRNOTAVAIL:
3442 		/*
3443 		 * IXAF_VERIFY_SOURCE tells us to pick a better source.
3444 		 * Don't have the application see that errno
3445 		 */
3446 		error = ENETUNREACH;
3447 		/* FALLTHRU */
3448 	default:
3449 		mutex_enter(&connp->conn_lock);
3450 		/*
3451 		 * Clear the source and v6lastdst so we call ip_attr_connect
3452 		 * for the next packet and try to pick a better source.
3453 		 */
3454 		if (connp->conn_mcbc_bind)
3455 			connp->conn_saddr_v6 = ipv6_all_zeros;
3456 		else
3457 			connp->conn_saddr_v6 = connp->conn_bound_addr_v6;
3458 		connp->conn_v6lastdst = ipv6_all_zeros;
3459 		mutex_exit(&connp->conn_lock);
3460 		break;
3461 	}
3462 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3463 	ixa->ixa_cred = connp->conn_cred;	/* Restore */
3464 	ixa->ixa_cpid = connp->conn_cpid;
3465 	ixa_refrele(ixa);
3466 	return (error);
3467 }
3468 
3469 
3470 /*
3471  * Prepend the header template and then fill in the source and
3472  * flowinfo. The caller needs to handle the destination address since
3473  * it's setting is different if rthdr or source route.
3474  *
3475  * Returns NULL is allocation failed or if the packet would exceed IP_MAXPACKET.
3476  * When it returns NULL it sets errorp.
3477  */
3478 static mblk_t *
3479 udp_prepend_header_template(conn_t *connp, ip_xmit_attr_t *ixa, mblk_t *mp,
3480     const in6_addr_t *v6src, in_port_t dstport, uint32_t flowinfo, int *errorp)
3481 {
3482 	udp_t		*udp = connp->conn_udp;
3483 	udp_stack_t	*us = udp->udp_us;
3484 	boolean_t	insert_spi = udp->udp_nat_t_endpoint;
3485 	uint_t		pktlen;
3486 	uint_t		alloclen;
3487 	uint_t		copylen;
3488 	uint8_t		*iph;
3489 	uint_t		ip_hdr_length;
3490 	udpha_t		*udpha;
3491 	uint32_t	cksum;
3492 	ip_pkt_t	*ipp;
3493 
3494 	ASSERT(MUTEX_HELD(&connp->conn_lock));
3495 
3496 	/*
3497 	 * Copy the header template and leave space for an SPI
3498 	 */
3499 	copylen = connp->conn_ht_iphc_len;
3500 	alloclen = copylen + (insert_spi ? sizeof (uint32_t) : 0);
3501 	pktlen = alloclen + msgdsize(mp);
3502 	if (pktlen > IP_MAXPACKET) {
3503 		freemsg(mp);
3504 		*errorp = EMSGSIZE;
3505 		return (NULL);
3506 	}
3507 	ixa->ixa_pktlen = pktlen;
3508 
3509 	/* check/fix buffer config, setup pointers into it */
3510 	iph = mp->b_rptr - alloclen;
3511 	if (DB_REF(mp) != 1 || iph < DB_BASE(mp) || !OK_32PTR(iph)) {
3512 		mblk_t *mp1;
3513 
3514 		mp1 = allocb(alloclen + us->us_wroff_extra, BPRI_MED);
3515 		if (mp1 == NULL) {
3516 			freemsg(mp);
3517 			*errorp = ENOMEM;
3518 			return (NULL);
3519 		}
3520 		mp1->b_wptr = DB_LIM(mp1);
3521 		mp1->b_cont = mp;
3522 		mp = mp1;
3523 		iph = (mp->b_wptr - alloclen);
3524 	}
3525 	mp->b_rptr = iph;
3526 	bcopy(connp->conn_ht_iphc, iph, copylen);
3527 	ip_hdr_length = (uint_t)(connp->conn_ht_ulp - connp->conn_ht_iphc);
3528 
3529 	ixa->ixa_ip_hdr_length = ip_hdr_length;
3530 	udpha = (udpha_t *)(iph + ip_hdr_length);
3531 
3532 	/*
3533 	 * Setup header length and prepare for ULP checksum done in IP.
3534 	 * udp_build_hdr_template has already massaged any routing header
3535 	 * and placed the result in conn_sum.
3536 	 *
3537 	 * We make it easy for IP to include our pseudo header
3538 	 * by putting our length in uha_checksum.
3539 	 */
3540 	cksum = pktlen - ip_hdr_length;
3541 	udpha->uha_length = htons(cksum);
3542 
3543 	cksum += connp->conn_sum;
3544 	cksum = (cksum >> 16) + (cksum & 0xFFFF);
3545 	ASSERT(cksum < 0x10000);
3546 
3547 	ipp = &connp->conn_xmit_ipp;
3548 	if (ixa->ixa_flags & IXAF_IS_IPV4) {
3549 		ipha_t	*ipha = (ipha_t *)iph;
3550 
3551 		ipha->ipha_length = htons((uint16_t)pktlen);
3552 
3553 		/* IP does the checksum if uha_checksum is non-zero */
3554 		if (us->us_do_checksum)
3555 			udpha->uha_checksum = htons(cksum);
3556 
3557 		/* if IP_PKTINFO specified an addres it wins over bind() */
3558 		if ((ipp->ipp_fields & IPPF_ADDR) &&
3559 		    IN6_IS_ADDR_V4MAPPED(&ipp->ipp_addr)) {
3560 			ASSERT(ipp->ipp_addr_v4 != INADDR_ANY);
3561 			ipha->ipha_src = ipp->ipp_addr_v4;
3562 		} else {
3563 			IN6_V4MAPPED_TO_IPADDR(v6src, ipha->ipha_src);
3564 		}
3565 	} else {
3566 		ip6_t *ip6h = (ip6_t *)iph;
3567 
3568 		ip6h->ip6_plen =  htons((uint16_t)(pktlen - IPV6_HDR_LEN));
3569 		udpha->uha_checksum = htons(cksum);
3570 
3571 		/* if IP_PKTINFO specified an addres it wins over bind() */
3572 		if ((ipp->ipp_fields & IPPF_ADDR) &&
3573 		    !IN6_IS_ADDR_V4MAPPED(&ipp->ipp_addr)) {
3574 			ASSERT(!IN6_IS_ADDR_UNSPECIFIED(&ipp->ipp_addr));
3575 			ip6h->ip6_src = ipp->ipp_addr;
3576 		} else {
3577 			ip6h->ip6_src = *v6src;
3578 		}
3579 		ip6h->ip6_vcf =
3580 		    (IPV6_DEFAULT_VERS_AND_FLOW & IPV6_VERS_AND_FLOW_MASK) |
3581 		    (flowinfo & ~IPV6_VERS_AND_FLOW_MASK);
3582 		if (ipp->ipp_fields & IPPF_TCLASS) {
3583 			/* Overrides the class part of flowinfo */
3584 			ip6h->ip6_vcf = IPV6_TCLASS_FLOW(ip6h->ip6_vcf,
3585 			    ipp->ipp_tclass);
3586 		}
3587 	}
3588 
3589 	/* Insert all-0s SPI now. */
3590 	if (insert_spi)
3591 		*((uint32_t *)(udpha + 1)) = 0;
3592 
3593 	udpha->uha_dst_port = dstport;
3594 	return (mp);
3595 }
3596 
3597 /*
3598  * Send a T_UDERR_IND in response to an M_DATA
3599  */
3600 static void
3601 udp_ud_err_connected(conn_t *connp, t_scalar_t error)
3602 {
3603 	struct sockaddr_storage ss;
3604 	sin_t		*sin;
3605 	sin6_t		*sin6;
3606 	struct sockaddr	*addr;
3607 	socklen_t	addrlen;
3608 	mblk_t		*mp1;
3609 
3610 	mutex_enter(&connp->conn_lock);
3611 	/* Initialize addr and addrlen as if they're passed in */
3612 	if (connp->conn_family == AF_INET) {
3613 		sin = (sin_t *)&ss;
3614 		*sin = sin_null;
3615 		sin->sin_family = AF_INET;
3616 		sin->sin_port = connp->conn_fport;
3617 		sin->sin_addr.s_addr = connp->conn_faddr_v4;
3618 		addr = (struct sockaddr *)sin;
3619 		addrlen = sizeof (*sin);
3620 	} else {
3621 		sin6 = (sin6_t *)&ss;
3622 		*sin6 = sin6_null;
3623 		sin6->sin6_family = AF_INET6;
3624 		sin6->sin6_port = connp->conn_fport;
3625 		sin6->sin6_flowinfo = connp->conn_flowinfo;
3626 		sin6->sin6_addr = connp->conn_faddr_v6;
3627 		if (IN6_IS_ADDR_LINKSCOPE(&connp->conn_faddr_v6) &&
3628 		    (connp->conn_ixa->ixa_flags & IXAF_SCOPEID_SET)) {
3629 			sin6->sin6_scope_id = connp->conn_ixa->ixa_scopeid;
3630 		} else {
3631 			sin6->sin6_scope_id = 0;
3632 		}
3633 		sin6->__sin6_src_id = 0;
3634 		addr = (struct sockaddr *)sin6;
3635 		addrlen = sizeof (*sin6);
3636 	}
3637 	mutex_exit(&connp->conn_lock);
3638 
3639 	mp1 = mi_tpi_uderror_ind((char *)addr, addrlen, NULL, 0, error);
3640 	if (mp1 != NULL)
3641 		putnext(connp->conn_rq, mp1);
3642 }
3643 
3644 /*
3645  * This routine handles all messages passed downstream.  It either
3646  * consumes the message or passes it downstream; it never queues a
3647  * a message.
3648  *
3649  * Also entry point for sockfs when udp is in "direct sockfs" mode.  This mode
3650  * is valid when we are directly beneath the stream head, and thus sockfs
3651  * is able to bypass STREAMS and directly call us, passing along the sockaddr
3652  * structure without the cumbersome T_UNITDATA_REQ interface for the case of
3653  * connected endpoints.
3654  */
3655 void
3656 udp_wput(queue_t *q, mblk_t *mp)
3657 {
3658 	sin6_t		*sin6;
3659 	sin_t		*sin = NULL;
3660 	uint_t		srcid;
3661 	conn_t		*connp = Q_TO_CONN(q);
3662 	udp_t		*udp = connp->conn_udp;
3663 	int		error = 0;
3664 	struct sockaddr	*addr = NULL;
3665 	socklen_t	addrlen;
3666 	udp_stack_t	*us = udp->udp_us;
3667 	struct T_unitdata_req *tudr;
3668 	mblk_t		*data_mp;
3669 	ushort_t	ipversion;
3670 	cred_t		*cr;
3671 	pid_t		pid;
3672 
3673 	/*
3674 	 * We directly handle several cases here: T_UNITDATA_REQ message
3675 	 * coming down as M_PROTO/M_PCPROTO and M_DATA messages for connected
3676 	 * socket.
3677 	 */
3678 	switch (DB_TYPE(mp)) {
3679 	case M_DATA:
3680 		if (!udp->udp_issocket || udp->udp_state != TS_DATA_XFER) {
3681 			/* Not connected; address is required */
3682 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3683 			UDP_DBGSTAT(us, udp_data_notconn);
3684 			UDP_STAT(us, udp_out_err_notconn);
3685 			freemsg(mp);
3686 			return;
3687 		}
3688 		/*
3689 		 * All Solaris components should pass a db_credp
3690 		 * for this message, hence we ASSERT.
3691 		 * On production kernels we return an error to be robust against
3692 		 * random streams modules sitting on top of us.
3693 		 */
3694 		cr = msg_getcred(mp, &pid);
3695 		ASSERT(cr != NULL);
3696 		if (cr == NULL) {
3697 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3698 			freemsg(mp);
3699 			return;
3700 		}
3701 		ASSERT(udp->udp_issocket);
3702 		UDP_DBGSTAT(us, udp_data_conn);
3703 		error = udp_output_connected(connp, mp, cr, pid);
3704 		if (error != 0) {
3705 			UDP_STAT(us, udp_out_err_output);
3706 			if (connp->conn_rq != NULL)
3707 				udp_ud_err_connected(connp, (t_scalar_t)error);
3708 #ifdef DEBUG
3709 			printf("udp_output_connected returned %d\n", error);
3710 #endif
3711 		}
3712 		return;
3713 
3714 	case M_PROTO:
3715 	case M_PCPROTO:
3716 		tudr = (struct T_unitdata_req *)mp->b_rptr;
3717 		if (MBLKL(mp) < sizeof (*tudr) ||
3718 		    ((t_primp_t)mp->b_rptr)->type != T_UNITDATA_REQ) {
3719 			udp_wput_other(q, mp);
3720 			return;
3721 		}
3722 		break;
3723 
3724 	default:
3725 		udp_wput_other(q, mp);
3726 		return;
3727 	}
3728 
3729 	/* Handle valid T_UNITDATA_REQ here */
3730 	data_mp = mp->b_cont;
3731 	if (data_mp == NULL) {
3732 		error = EPROTO;
3733 		goto ud_error2;
3734 	}
3735 	mp->b_cont = NULL;
3736 
3737 	if (!MBLKIN(mp, 0, tudr->DEST_offset + tudr->DEST_length)) {
3738 		error = EADDRNOTAVAIL;
3739 		goto ud_error2;
3740 	}
3741 
3742 	/*
3743 	 * All Solaris components should pass a db_credp
3744 	 * for this TPI message, hence we should ASSERT.
3745 	 * However, RPC (svc_clts_ksend) does this odd thing where it
3746 	 * passes the options from a T_UNITDATA_IND unchanged in a
3747 	 * T_UNITDATA_REQ. While that is the right thing to do for
3748 	 * some options, SCM_UCRED being the key one, this also makes it
3749 	 * pass down IP_RECVDSTADDR. Hence we can't ASSERT here.
3750 	 */
3751 	cr = msg_getcred(mp, &pid);
3752 	if (cr == NULL) {
3753 		cr = connp->conn_cred;
3754 		pid = connp->conn_cpid;
3755 	}
3756 
3757 	/*
3758 	 * If a port has not been bound to the stream, fail.
3759 	 * This is not a problem when sockfs is directly
3760 	 * above us, because it will ensure that the socket
3761 	 * is first bound before allowing data to be sent.
3762 	 */
3763 	if (udp->udp_state == TS_UNBND) {
3764 		error = EPROTO;
3765 		goto ud_error2;
3766 	}
3767 	addr = (struct sockaddr *)&mp->b_rptr[tudr->DEST_offset];
3768 	addrlen = tudr->DEST_length;
3769 
3770 	switch (connp->conn_family) {
3771 	case AF_INET6:
3772 		sin6 = (sin6_t *)addr;
3773 		if (!OK_32PTR((char *)sin6) || (addrlen != sizeof (sin6_t)) ||
3774 		    (sin6->sin6_family != AF_INET6)) {
3775 			error = EADDRNOTAVAIL;
3776 			goto ud_error2;
3777 		}
3778 
3779 		srcid = sin6->__sin6_src_id;
3780 		if (!IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
3781 			/*
3782 			 * Destination is a non-IPv4-compatible IPv6 address.
3783 			 * Send out an IPv6 format packet.
3784 			 */
3785 
3786 			/*
3787 			 * If the local address is a mapped address return
3788 			 * an error.
3789 			 * It would be possible to send an IPv6 packet but the
3790 			 * response would never make it back to the application
3791 			 * since it is bound to a mapped address.
3792 			 */
3793 			if (IN6_IS_ADDR_V4MAPPED(&connp->conn_saddr_v6)) {
3794 				error = EADDRNOTAVAIL;
3795 				goto ud_error2;
3796 			}
3797 
3798 			UDP_DBGSTAT(us, udp_out_ipv6);
3799 
3800 			if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
3801 				sin6->sin6_addr = ipv6_loopback;
3802 			ipversion = IPV6_VERSION;
3803 		} else {
3804 			if (connp->conn_ipv6_v6only) {
3805 				error = EADDRNOTAVAIL;
3806 				goto ud_error2;
3807 			}
3808 
3809 			/*
3810 			 * If the local address is not zero or a mapped address
3811 			 * return an error.  It would be possible to send an
3812 			 * IPv4 packet but the response would never make it
3813 			 * back to the application since it is bound to a
3814 			 * non-mapped address.
3815 			 */
3816 			if (!IN6_IS_ADDR_V4MAPPED(&connp->conn_saddr_v6) &&
3817 			    !IN6_IS_ADDR_UNSPECIFIED(&connp->conn_saddr_v6)) {
3818 				error = EADDRNOTAVAIL;
3819 				goto ud_error2;
3820 			}
3821 			UDP_DBGSTAT(us, udp_out_mapped);
3822 
3823 			if (V4_PART_OF_V6(sin6->sin6_addr) == INADDR_ANY) {
3824 				V4_PART_OF_V6(sin6->sin6_addr) =
3825 				    htonl(INADDR_LOOPBACK);
3826 			}
3827 			ipversion = IPV4_VERSION;
3828 		}
3829 
3830 		if (tudr->OPT_length != 0) {
3831 			/*
3832 			 * If we are connected then the destination needs to be
3833 			 * the same as the connected one.
3834 			 */
3835 			if (udp->udp_state == TS_DATA_XFER &&
3836 			    !conn_same_as_last_v6(connp, sin6)) {
3837 				error = EISCONN;
3838 				goto ud_error2;
3839 			}
3840 			UDP_STAT(us, udp_out_opt);
3841 			error = udp_output_ancillary(connp, NULL, sin6,
3842 			    data_mp, mp, NULL, cr, pid);
3843 		} else {
3844 			ip_xmit_attr_t *ixa;
3845 
3846 			/*
3847 			 * We have to allocate an ip_xmit_attr_t before we grab
3848 			 * conn_lock and we need to hold conn_lock once we've
3849 			 * checked conn_same_as_last_v6 to handle concurrent
3850 			 * send* calls on a socket.
3851 			 */
3852 			ixa = conn_get_ixa(connp, B_FALSE);
3853 			if (ixa == NULL) {
3854 				error = ENOMEM;
3855 				goto ud_error2;
3856 			}
3857 			mutex_enter(&connp->conn_lock);
3858 
3859 			if (conn_same_as_last_v6(connp, sin6) &&
3860 			    connp->conn_lastsrcid == srcid &&
3861 			    ipsec_outbound_policy_current(ixa)) {
3862 				UDP_DBGSTAT(us, udp_out_lastdst);
3863 				/* udp_output_lastdst drops conn_lock */
3864 				error = udp_output_lastdst(connp, data_mp, cr,
3865 				    pid, ixa);
3866 			} else {
3867 				UDP_DBGSTAT(us, udp_out_diffdst);
3868 				/* udp_output_newdst drops conn_lock */
3869 				error = udp_output_newdst(connp, data_mp, NULL,
3870 				    sin6, ipversion, cr, pid, ixa);
3871 			}
3872 			ASSERT(MUTEX_NOT_HELD(&connp->conn_lock));
3873 		}
3874 		if (error == 0) {
3875 			freeb(mp);
3876 			return;
3877 		}
3878 		break;
3879 
3880 	case AF_INET:
3881 		sin = (sin_t *)addr;
3882 		if ((!OK_32PTR((char *)sin) || addrlen != sizeof (sin_t)) ||
3883 		    (sin->sin_family != AF_INET)) {
3884 			error = EADDRNOTAVAIL;
3885 			goto ud_error2;
3886 		}
3887 		UDP_DBGSTAT(us, udp_out_ipv4);
3888 		if (sin->sin_addr.s_addr == INADDR_ANY)
3889 			sin->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
3890 		ipversion = IPV4_VERSION;
3891 
3892 		srcid = 0;
3893 		if (tudr->OPT_length != 0) {
3894 			/*
3895 			 * If we are connected then the destination needs to be
3896 			 * the same as the connected one.
3897 			 */
3898 			if (udp->udp_state == TS_DATA_XFER &&
3899 			    !conn_same_as_last_v4(connp, sin)) {
3900 				error = EISCONN;
3901 				goto ud_error2;
3902 			}
3903 			UDP_STAT(us, udp_out_opt);
3904 			error = udp_output_ancillary(connp, sin, NULL,
3905 			    data_mp, mp, NULL, cr, pid);
3906 		} else {
3907 			ip_xmit_attr_t *ixa;
3908 
3909 			/*
3910 			 * We have to allocate an ip_xmit_attr_t before we grab
3911 			 * conn_lock and we need to hold conn_lock once we've
3912 			 * checked conn_same_as_last_v4 to handle concurrent
3913 			 * send* calls on a socket.
3914 			 */
3915 			ixa = conn_get_ixa(connp, B_FALSE);
3916 			if (ixa == NULL) {
3917 				error = ENOMEM;
3918 				goto ud_error2;
3919 			}
3920 			mutex_enter(&connp->conn_lock);
3921 
3922 			if (conn_same_as_last_v4(connp, sin) &&
3923 			    ipsec_outbound_policy_current(ixa)) {
3924 				UDP_DBGSTAT(us, udp_out_lastdst);
3925 				/* udp_output_lastdst drops conn_lock */
3926 				error = udp_output_lastdst(connp, data_mp, cr,
3927 				    pid, ixa);
3928 			} else {
3929 				UDP_DBGSTAT(us, udp_out_diffdst);
3930 				/* udp_output_newdst drops conn_lock */
3931 				error = udp_output_newdst(connp, data_mp, sin,
3932 				    NULL, ipversion, cr, pid, ixa);
3933 			}
3934 			ASSERT(MUTEX_NOT_HELD(&connp->conn_lock));
3935 		}
3936 		if (error == 0) {
3937 			freeb(mp);
3938 			return;
3939 		}
3940 		break;
3941 	}
3942 	UDP_STAT(us, udp_out_err_output);
3943 	ASSERT(mp != NULL);
3944 	/* mp is freed by the following routine */
3945 	udp_ud_err(q, mp, (t_scalar_t)error);
3946 	return;
3947 
3948 ud_error2:
3949 	BUMP_MIB(&us->us_udp_mib, udpOutErrors);
3950 	freemsg(data_mp);
3951 	UDP_STAT(us, udp_out_err_output);
3952 	ASSERT(mp != NULL);
3953 	/* mp is freed by the following routine */
3954 	udp_ud_err(q, mp, (t_scalar_t)error);
3955 }
3956 
3957 /*
3958  * Handle the case of the IP address, port, flow label being different
3959  * for both IPv4 and IPv6.
3960  *
3961  * NOTE: The caller must hold conn_lock and we drop it here.
3962  */
3963 static int
3964 udp_output_newdst(conn_t *connp, mblk_t *data_mp, sin_t *sin, sin6_t *sin6,
3965     ushort_t ipversion, cred_t *cr, pid_t pid, ip_xmit_attr_t *ixa)
3966 {
3967 	uint_t		srcid;
3968 	uint32_t	flowinfo;
3969 	udp_t		*udp = connp->conn_udp;
3970 	int		error = 0;
3971 	ip_xmit_attr_t	*oldixa;
3972 	udp_stack_t	*us = udp->udp_us;
3973 	in6_addr_t	v6src;
3974 	in6_addr_t	v6dst;
3975 	in6_addr_t	v6nexthop;
3976 	in_port_t	dstport;
3977 
3978 	ASSERT(MUTEX_HELD(&connp->conn_lock));
3979 	ASSERT(ixa != NULL);
3980 	/*
3981 	 * We hold conn_lock across all the use and modifications of
3982 	 * the conn_lastdst, conn_ixa, and conn_xmit_ipp to ensure that they
3983 	 * stay consistent.
3984 	 */
3985 
3986 	ASSERT(cr != NULL);
3987 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
3988 	ixa->ixa_cred = cr;
3989 	ixa->ixa_cpid = pid;
3990 	if (is_system_labeled()) {
3991 		/* We need to restart with a label based on the cred */
3992 		ip_xmit_attr_restore_tsl(ixa, ixa->ixa_cred);
3993 	}
3994 
3995 	/*
3996 	 * If we are connected then the destination needs to be the
3997 	 * same as the connected one, which is not the case here since we
3998 	 * checked for that above.
3999 	 */
4000 	if (udp->udp_state == TS_DATA_XFER) {
4001 		mutex_exit(&connp->conn_lock);
4002 		error = EISCONN;
4003 		goto ud_error;
4004 	}
4005 
4006 	/* In case previous destination was multicast or multirt */
4007 	ip_attr_newdst(ixa);
4008 
4009 	/*
4010 	 * If laddr is unspecified then we look at sin6_src_id.
4011 	 * We will give precedence to a source address set with IPV6_PKTINFO
4012 	 * (aka IPPF_ADDR) but that is handled in build_hdrs. However, we don't
4013 	 * want ip_attr_connect to select a source (since it can fail) when
4014 	 * IPV6_PKTINFO is specified.
4015 	 * If this doesn't result in a source address then we get a source
4016 	 * from ip_attr_connect() below.
4017 	 */
4018 	v6src = connp->conn_saddr_v6;
4019 	if (sin != NULL) {
4020 		IN6_IPADDR_TO_V4MAPPED(sin->sin_addr.s_addr, &v6dst);
4021 		dstport = sin->sin_port;
4022 		flowinfo = 0;
4023 		srcid = 0;
4024 		ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
4025 		if (srcid != 0 && V4_PART_OF_V6(&v6src) == INADDR_ANY) {
4026 			ip_srcid_find_id(srcid, &v6src, IPCL_ZONEID(connp),
4027 			    connp->conn_netstack);
4028 		}
4029 		ixa->ixa_flags |= IXAF_IS_IPV4;
4030 	} else {
4031 		v6dst = sin6->sin6_addr;
4032 		dstport = sin6->sin6_port;
4033 		flowinfo = sin6->sin6_flowinfo;
4034 		srcid = sin6->__sin6_src_id;
4035 		if (IN6_IS_ADDR_LINKSCOPE(&v6dst) && sin6->sin6_scope_id != 0) {
4036 			ixa->ixa_scopeid = sin6->sin6_scope_id;
4037 			ixa->ixa_flags |= IXAF_SCOPEID_SET;
4038 		} else {
4039 			ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
4040 		}
4041 		if (srcid != 0 && IN6_IS_ADDR_UNSPECIFIED(&v6src)) {
4042 			ip_srcid_find_id(srcid, &v6src, IPCL_ZONEID(connp),
4043 			    connp->conn_netstack);
4044 		}
4045 		if (IN6_IS_ADDR_V4MAPPED(&v6dst))
4046 			ixa->ixa_flags |= IXAF_IS_IPV4;
4047 		else
4048 			ixa->ixa_flags &= ~IXAF_IS_IPV4;
4049 	}
4050 	/* Handle IP_PKTINFO/IPV6_PKTINFO setting source address. */
4051 	if (connp->conn_xmit_ipp.ipp_fields & IPPF_ADDR) {
4052 		ip_pkt_t *ipp = &connp->conn_xmit_ipp;
4053 
4054 		if (ixa->ixa_flags & IXAF_IS_IPV4) {
4055 			if (IN6_IS_ADDR_V4MAPPED(&ipp->ipp_addr))
4056 				v6src = ipp->ipp_addr;
4057 		} else {
4058 			if (!IN6_IS_ADDR_V4MAPPED(&ipp->ipp_addr))
4059 				v6src = ipp->ipp_addr;
4060 		}
4061 	}
4062 
4063 	ip_attr_nexthop(&connp->conn_xmit_ipp, ixa, &v6dst, &v6nexthop);
4064 	mutex_exit(&connp->conn_lock);
4065 
4066 	error = ip_attr_connect(connp, ixa, &v6src, &v6dst, &v6nexthop, dstport,
4067 	    &v6src, NULL, IPDF_ALLOW_MCBC | IPDF_VERIFY_DST | IPDF_IPSEC);
4068 	switch (error) {
4069 	case 0:
4070 		break;
4071 	case EADDRNOTAVAIL:
4072 		/*
4073 		 * IXAF_VERIFY_SOURCE tells us to pick a better source.
4074 		 * Don't have the application see that errno
4075 		 */
4076 		error = ENETUNREACH;
4077 		goto failed;
4078 	case ENETDOWN:
4079 		/*
4080 		 * Have !ipif_addr_ready address; drop packet silently
4081 		 * until we can get applications to not send until we
4082 		 * are ready.
4083 		 */
4084 		error = 0;
4085 		goto failed;
4086 	case EHOSTUNREACH:
4087 	case ENETUNREACH:
4088 		if (ixa->ixa_ire != NULL) {
4089 			/*
4090 			 * Let conn_ip_output/ire_send_noroute return
4091 			 * the error and send any local ICMP error.
4092 			 */
4093 			error = 0;
4094 			break;
4095 		}
4096 		/* FALLTHRU */
4097 	failed:
4098 	default:
4099 		goto ud_error;
4100 	}
4101 
4102 
4103 	/*
4104 	 * Cluster note: we let the cluster hook know that we are sending to a
4105 	 * new address and/or port.
4106 	 */
4107 	if (cl_inet_connect2 != NULL) {
4108 		CL_INET_UDP_CONNECT(connp, B_TRUE, &v6dst, dstport, error);
4109 		if (error != 0) {
4110 			error = EHOSTUNREACH;
4111 			goto ud_error;
4112 		}
4113 	}
4114 
4115 	mutex_enter(&connp->conn_lock);
4116 	/*
4117 	 * While we dropped the lock some other thread might have connected
4118 	 * this socket. If so we bail out with EISCONN to ensure that the
4119 	 * connecting thread is the one that updates conn_ixa, conn_ht_*
4120 	 * and conn_*last*.
4121 	 */
4122 	if (udp->udp_state == TS_DATA_XFER) {
4123 		mutex_exit(&connp->conn_lock);
4124 		error = EISCONN;
4125 		goto ud_error;
4126 	}
4127 
4128 	/*
4129 	 * We need to rebuild the headers if
4130 	 *  - we are labeling packets (could be different for different
4131 	 *    destinations)
4132 	 *  - we have a source route (or routing header) since we need to
4133 	 *    massage that to get the pseudo-header checksum
4134 	 *  - the IP version is different than the last time
4135 	 *  - a socket option with COA_HEADER_CHANGED has been set which
4136 	 *    set conn_v6lastdst to zero.
4137 	 *
4138 	 * Otherwise the prepend function will just update the src, dst,
4139 	 * dstport, and flow label.
4140 	 */
4141 	if (is_system_labeled()) {
4142 		/* TX MLP requires SCM_UCRED and don't have that here */
4143 		if (connp->conn_mlp_type != mlptSingle) {
4144 			mutex_exit(&connp->conn_lock);
4145 			error = ECONNREFUSED;
4146 			goto ud_error;
4147 		}
4148 		/*
4149 		 * Check whether Trusted Solaris policy allows communication
4150 		 * with this host, and pretend that the destination is
4151 		 * unreachable if not.
4152 		 * Compute any needed label and place it in ipp_label_v4/v6.
4153 		 *
4154 		 * Later conn_build_hdr_template/conn_prepend_hdr takes
4155 		 * ipp_label_v4/v6 to form the packet.
4156 		 *
4157 		 * Tsol note: Since we hold conn_lock we know no other
4158 		 * thread manipulates conn_xmit_ipp.
4159 		 */
4160 		error = conn_update_label(connp, ixa, &v6dst,
4161 		    &connp->conn_xmit_ipp);
4162 		if (error != 0) {
4163 			mutex_exit(&connp->conn_lock);
4164 			goto ud_error;
4165 		}
4166 		/* Rebuild the header template */
4167 		error = udp_build_hdr_template(connp, &v6src, &v6dst, dstport,
4168 		    flowinfo);
4169 		if (error != 0) {
4170 			mutex_exit(&connp->conn_lock);
4171 			goto ud_error;
4172 		}
4173 	} else if ((connp->conn_xmit_ipp.ipp_fields &
4174 	    (IPPF_IPV4_OPTIONS|IPPF_RTHDR)) ||
4175 	    ipversion != connp->conn_lastipversion ||
4176 	    IN6_IS_ADDR_UNSPECIFIED(&connp->conn_v6lastdst)) {
4177 		/* Rebuild the header template */
4178 		error = udp_build_hdr_template(connp, &v6src, &v6dst, dstport,
4179 		    flowinfo);
4180 		if (error != 0) {
4181 			mutex_exit(&connp->conn_lock);
4182 			goto ud_error;
4183 		}
4184 	} else {
4185 		/* Simply update the destination address if no source route */
4186 		if (ixa->ixa_flags & IXAF_IS_IPV4) {
4187 			ipha_t	*ipha = (ipha_t *)connp->conn_ht_iphc;
4188 
4189 			IN6_V4MAPPED_TO_IPADDR(&v6dst, ipha->ipha_dst);
4190 			if (ixa->ixa_flags & IXAF_PMTU_IPV4_DF) {
4191 				ipha->ipha_fragment_offset_and_flags |=
4192 				    IPH_DF_HTONS;
4193 			} else {
4194 				ipha->ipha_fragment_offset_and_flags &=
4195 				    ~IPH_DF_HTONS;
4196 			}
4197 		} else {
4198 			ip6_t *ip6h = (ip6_t *)connp->conn_ht_iphc;
4199 			ip6h->ip6_dst = v6dst;
4200 		}
4201 	}
4202 
4203 	/*
4204 	 * Remember the dst/dstport etc which corresponds to the built header
4205 	 * template and conn_ixa.
4206 	 */
4207 	oldixa = conn_replace_ixa(connp, ixa);
4208 	connp->conn_v6lastdst = v6dst;
4209 	connp->conn_lastipversion = ipversion;
4210 	connp->conn_lastdstport = dstport;
4211 	connp->conn_lastflowinfo = flowinfo;
4212 	connp->conn_lastscopeid = ixa->ixa_scopeid;
4213 	connp->conn_lastsrcid = srcid;
4214 	/* Also remember a source to use together with lastdst */
4215 	connp->conn_v6lastsrc = v6src;
4216 
4217 	data_mp = udp_prepend_header_template(connp, ixa, data_mp, &v6src,
4218 	    dstport, flowinfo, &error);
4219 
4220 	/* Done with conn_t */
4221 	mutex_exit(&connp->conn_lock);
4222 	ixa_refrele(oldixa);
4223 
4224 	if (data_mp == NULL) {
4225 		ASSERT(error != 0);
4226 		goto ud_error;
4227 	}
4228 
4229 	/* We're done.  Pass the packet to ip. */
4230 	BUMP_MIB(&us->us_udp_mib, udpHCOutDatagrams);
4231 
4232 	DTRACE_UDP5(send, mblk_t *, NULL, ip_xmit_attr_t *, ixa,
4233 	    void_ip_t *, data_mp->b_rptr, udp_t *, udp, udpha_t *,
4234 	    &data_mp->b_rptr[ixa->ixa_ip_hdr_length]);
4235 
4236 	error = conn_ip_output(data_mp, ixa);
4237 	/* No udpOutErrors if an error since IP increases its error counter */
4238 	switch (error) {
4239 	case 0:
4240 		break;
4241 	case EWOULDBLOCK:
4242 		(void) ixa_check_drain_insert(connp, ixa);
4243 		error = 0;
4244 		break;
4245 	case EADDRNOTAVAIL:
4246 		/*
4247 		 * IXAF_VERIFY_SOURCE tells us to pick a better source.
4248 		 * Don't have the application see that errno
4249 		 */
4250 		error = ENETUNREACH;
4251 		/* FALLTHRU */
4252 	default:
4253 		mutex_enter(&connp->conn_lock);
4254 		/*
4255 		 * Clear the source and v6lastdst so we call ip_attr_connect
4256 		 * for the next packet and try to pick a better source.
4257 		 */
4258 		if (connp->conn_mcbc_bind)
4259 			connp->conn_saddr_v6 = ipv6_all_zeros;
4260 		else
4261 			connp->conn_saddr_v6 = connp->conn_bound_addr_v6;
4262 		connp->conn_v6lastdst = ipv6_all_zeros;
4263 		mutex_exit(&connp->conn_lock);
4264 		break;
4265 	}
4266 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
4267 	ixa->ixa_cred = connp->conn_cred;	/* Restore */
4268 	ixa->ixa_cpid = connp->conn_cpid;
4269 	ixa_refrele(ixa);
4270 	return (error);
4271 
4272 ud_error:
4273 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
4274 	ixa->ixa_cred = connp->conn_cred;	/* Restore */
4275 	ixa->ixa_cpid = connp->conn_cpid;
4276 	ixa_refrele(ixa);
4277 
4278 	freemsg(data_mp);
4279 	BUMP_MIB(&us->us_udp_mib, udpOutErrors);
4280 	UDP_STAT(us, udp_out_err_output);
4281 	return (error);
4282 }
4283 
4284 /* ARGSUSED */
4285 static void
4286 udp_wput_fallback(queue_t *wq, mblk_t *mp)
4287 {
4288 #ifdef DEBUG
4289 	cmn_err(CE_CONT, "udp_wput_fallback: Message in fallback \n");
4290 #endif
4291 	freemsg(mp);
4292 }
4293 
4294 
4295 /*
4296  * Handle special out-of-band ioctl requests (see PSARC/2008/265).
4297  */
4298 static void
4299 udp_wput_cmdblk(queue_t *q, mblk_t *mp)
4300 {
4301 	void	*data;
4302 	mblk_t	*datamp = mp->b_cont;
4303 	conn_t	*connp = Q_TO_CONN(q);
4304 	udp_t	*udp = connp->conn_udp;
4305 	cmdblk_t *cmdp = (cmdblk_t *)mp->b_rptr;
4306 
4307 	if (datamp == NULL || MBLKL(datamp) < cmdp->cb_len) {
4308 		cmdp->cb_error = EPROTO;
4309 		qreply(q, mp);
4310 		return;
4311 	}
4312 	data = datamp->b_rptr;
4313 
4314 	mutex_enter(&connp->conn_lock);
4315 	switch (cmdp->cb_cmd) {
4316 	case TI_GETPEERNAME:
4317 		if (udp->udp_state != TS_DATA_XFER)
4318 			cmdp->cb_error = ENOTCONN;
4319 		else
4320 			cmdp->cb_error = conn_getpeername(connp, data,
4321 			    &cmdp->cb_len);
4322 		break;
4323 	case TI_GETMYNAME:
4324 		cmdp->cb_error = conn_getsockname(connp, data, &cmdp->cb_len);
4325 		break;
4326 	default:
4327 		cmdp->cb_error = EINVAL;
4328 		break;
4329 	}
4330 	mutex_exit(&connp->conn_lock);
4331 
4332 	qreply(q, mp);
4333 }
4334 
4335 static void
4336 udp_use_pure_tpi(udp_t *udp)
4337 {
4338 	conn_t	*connp = udp->udp_connp;
4339 
4340 	mutex_enter(&connp->conn_lock);
4341 	udp->udp_issocket = B_FALSE;
4342 	mutex_exit(&connp->conn_lock);
4343 	UDP_STAT(udp->udp_us, udp_sock_fallback);
4344 }
4345 
4346 static void
4347 udp_wput_other(queue_t *q, mblk_t *mp)
4348 {
4349 	uchar_t	*rptr = mp->b_rptr;
4350 	struct iocblk *iocp;
4351 	conn_t	*connp = Q_TO_CONN(q);
4352 	udp_t	*udp = connp->conn_udp;
4353 	cred_t	*cr;
4354 
4355 	switch (mp->b_datap->db_type) {
4356 	case M_CMD:
4357 		udp_wput_cmdblk(q, mp);
4358 		return;
4359 
4360 	case M_PROTO:
4361 	case M_PCPROTO:
4362 		if (mp->b_wptr - rptr < sizeof (t_scalar_t)) {
4363 			/*
4364 			 * If the message does not contain a PRIM_type,
4365 			 * throw it away.
4366 			 */
4367 			freemsg(mp);
4368 			return;
4369 		}
4370 		switch (((t_primp_t)rptr)->type) {
4371 		case T_ADDR_REQ:
4372 			udp_addr_req(q, mp);
4373 			return;
4374 		case O_T_BIND_REQ:
4375 		case T_BIND_REQ:
4376 			udp_tpi_bind(q, mp);
4377 			return;
4378 		case T_CONN_REQ:
4379 			udp_tpi_connect(q, mp);
4380 			return;
4381 		case T_CAPABILITY_REQ:
4382 			udp_capability_req(q, mp);
4383 			return;
4384 		case T_INFO_REQ:
4385 			udp_info_req(q, mp);
4386 			return;
4387 		case T_UNITDATA_REQ:
4388 			/*
4389 			 * If a T_UNITDATA_REQ gets here, the address must
4390 			 * be bad.  Valid T_UNITDATA_REQs are handled
4391 			 * in udp_wput.
4392 			 */
4393 			udp_ud_err(q, mp, EADDRNOTAVAIL);
4394 			return;
4395 		case T_UNBIND_REQ:
4396 			udp_tpi_unbind(q, mp);
4397 			return;
4398 		case T_SVR4_OPTMGMT_REQ:
4399 			/*
4400 			 * All Solaris components should pass a db_credp
4401 			 * for this TPI message, hence we ASSERT.
4402 			 * But in case there is some other M_PROTO that looks
4403 			 * like a TPI message sent by some other kernel
4404 			 * component, we check and return an error.
4405 			 */
4406 			cr = msg_getcred(mp, NULL);
4407 			ASSERT(cr != NULL);
4408 			if (cr == NULL) {
4409 				udp_err_ack(q, mp, TSYSERR, EINVAL);
4410 				return;
4411 			}
4412 			if (!snmpcom_req(q, mp, udp_snmp_set, ip_snmp_get,
4413 			    cr)) {
4414 				svr4_optcom_req(q, mp, cr, &udp_opt_obj);
4415 			}
4416 			return;
4417 
4418 		case T_OPTMGMT_REQ:
4419 			/*
4420 			 * All Solaris components should pass a db_credp
4421 			 * for this TPI message, hence we ASSERT.
4422 			 * But in case there is some other M_PROTO that looks
4423 			 * like a TPI message sent by some other kernel
4424 			 * component, we check and return an error.
4425 			 */
4426 			cr = msg_getcred(mp, NULL);
4427 			ASSERT(cr != NULL);
4428 			if (cr == NULL) {
4429 				udp_err_ack(q, mp, TSYSERR, EINVAL);
4430 				return;
4431 			}
4432 			tpi_optcom_req(q, mp, cr, &udp_opt_obj);
4433 			return;
4434 
4435 		case T_DISCON_REQ:
4436 			udp_tpi_disconnect(q, mp);
4437 			return;
4438 
4439 		/* The following TPI message is not supported by udp. */
4440 		case O_T_CONN_RES:
4441 		case T_CONN_RES:
4442 			udp_err_ack(q, mp, TNOTSUPPORT, 0);
4443 			return;
4444 
4445 		/* The following 3 TPI requests are illegal for udp. */
4446 		case T_DATA_REQ:
4447 		case T_EXDATA_REQ:
4448 		case T_ORDREL_REQ:
4449 			udp_err_ack(q, mp, TNOTSUPPORT, 0);
4450 			return;
4451 		default:
4452 			break;
4453 		}
4454 		break;
4455 	case M_FLUSH:
4456 		if (*rptr & FLUSHW)
4457 			flushq(q, FLUSHDATA);
4458 		break;
4459 	case M_IOCTL:
4460 		iocp = (struct iocblk *)mp->b_rptr;
4461 		switch (iocp->ioc_cmd) {
4462 		case TI_GETPEERNAME:
4463 			if (udp->udp_state != TS_DATA_XFER) {
4464 				/*
4465 				 * If a default destination address has not
4466 				 * been associated with the stream, then we
4467 				 * don't know the peer's name.
4468 				 */
4469 				iocp->ioc_error = ENOTCONN;
4470 				iocp->ioc_count = 0;
4471 				mp->b_datap->db_type = M_IOCACK;
4472 				qreply(q, mp);
4473 				return;
4474 			}
4475 			/* FALLTHRU */
4476 		case TI_GETMYNAME:
4477 			/*
4478 			 * For TI_GETPEERNAME and TI_GETMYNAME, we first
4479 			 * need to copyin the user's strbuf structure.
4480 			 * Processing will continue in the M_IOCDATA case
4481 			 * below.
4482 			 */
4483 			mi_copyin(q, mp, NULL,
4484 			    SIZEOF_STRUCT(strbuf, iocp->ioc_flag));
4485 			return;
4486 		case _SIOCSOCKFALLBACK:
4487 			/*
4488 			 * Either sockmod is about to be popped and the
4489 			 * socket would now be treated as a plain stream,
4490 			 * or a module is about to be pushed so we have
4491 			 * to follow pure TPI semantics.
4492 			 */
4493 			if (!udp->udp_issocket) {
4494 				DB_TYPE(mp) = M_IOCNAK;
4495 				iocp->ioc_error = EINVAL;
4496 			} else {
4497 				udp_use_pure_tpi(udp);
4498 
4499 				DB_TYPE(mp) = M_IOCACK;
4500 				iocp->ioc_error = 0;
4501 			}
4502 			iocp->ioc_count = 0;
4503 			iocp->ioc_rval = 0;
4504 			qreply(q, mp);
4505 			return;
4506 		default:
4507 			break;
4508 		}
4509 		break;
4510 	case M_IOCDATA:
4511 		udp_wput_iocdata(q, mp);
4512 		return;
4513 	default:
4514 		/* Unrecognized messages are passed through without change. */
4515 		break;
4516 	}
4517 	ip_wput_nondata(q, mp);
4518 }
4519 
4520 /*
4521  * udp_wput_iocdata is called by udp_wput_other to handle all M_IOCDATA
4522  * messages.
4523  */
4524 static void
4525 udp_wput_iocdata(queue_t *q, mblk_t *mp)
4526 {
4527 	mblk_t		*mp1;
4528 	struct	iocblk *iocp = (struct iocblk *)mp->b_rptr;
4529 	STRUCT_HANDLE(strbuf, sb);
4530 	uint_t		addrlen;
4531 	conn_t		*connp = Q_TO_CONN(q);
4532 	udp_t		*udp = connp->conn_udp;
4533 
4534 	/* Make sure it is one of ours. */
4535 	switch (iocp->ioc_cmd) {
4536 	case TI_GETMYNAME:
4537 	case TI_GETPEERNAME:
4538 		break;
4539 	default:
4540 		ip_wput_nondata(q, mp);
4541 		return;
4542 	}
4543 
4544 	switch (mi_copy_state(q, mp, &mp1)) {
4545 	case -1:
4546 		return;
4547 	case MI_COPY_CASE(MI_COPY_IN, 1):
4548 		break;
4549 	case MI_COPY_CASE(MI_COPY_OUT, 1):
4550 		/*
4551 		 * The address has been copied out, so now
4552 		 * copyout the strbuf.
4553 		 */
4554 		mi_copyout(q, mp);
4555 		return;
4556 	case MI_COPY_CASE(MI_COPY_OUT, 2):
4557 		/*
4558 		 * The address and strbuf have been copied out.
4559 		 * We're done, so just acknowledge the original
4560 		 * M_IOCTL.
4561 		 */
4562 		mi_copy_done(q, mp, 0);
4563 		return;
4564 	default:
4565 		/*
4566 		 * Something strange has happened, so acknowledge
4567 		 * the original M_IOCTL with an EPROTO error.
4568 		 */
4569 		mi_copy_done(q, mp, EPROTO);
4570 		return;
4571 	}
4572 
4573 	/*
4574 	 * Now we have the strbuf structure for TI_GETMYNAME
4575 	 * and TI_GETPEERNAME.  Next we copyout the requested
4576 	 * address and then we'll copyout the strbuf.
4577 	 */
4578 	STRUCT_SET_HANDLE(sb, iocp->ioc_flag, (void *)mp1->b_rptr);
4579 
4580 	if (connp->conn_family == AF_INET)
4581 		addrlen = sizeof (sin_t);
4582 	else
4583 		addrlen = sizeof (sin6_t);
4584 
4585 	if (STRUCT_FGET(sb, maxlen) < addrlen) {
4586 		mi_copy_done(q, mp, EINVAL);
4587 		return;
4588 	}
4589 
4590 	switch (iocp->ioc_cmd) {
4591 	case TI_GETMYNAME:
4592 		break;
4593 	case TI_GETPEERNAME:
4594 		if (udp->udp_state != TS_DATA_XFER) {
4595 			mi_copy_done(q, mp, ENOTCONN);
4596 			return;
4597 		}
4598 		break;
4599 	}
4600 	mp1 = mi_copyout_alloc(q, mp, STRUCT_FGETP(sb, buf), addrlen, B_TRUE);
4601 	if (!mp1)
4602 		return;
4603 
4604 	STRUCT_FSET(sb, len, addrlen);
4605 	switch (((struct iocblk *)mp->b_rptr)->ioc_cmd) {
4606 	case TI_GETMYNAME:
4607 		(void) conn_getsockname(connp, (struct sockaddr *)mp1->b_wptr,
4608 		    &addrlen);
4609 		break;
4610 	case TI_GETPEERNAME:
4611 		(void) conn_getpeername(connp, (struct sockaddr *)mp1->b_wptr,
4612 		    &addrlen);
4613 		break;
4614 	}
4615 	mp1->b_wptr += addrlen;
4616 	/* Copy out the address */
4617 	mi_copyout(q, mp);
4618 }
4619 
4620 void
4621 udp_ddi_g_init(void)
4622 {
4623 	udp_max_optsize = optcom_max_optsize(udp_opt_obj.odb_opt_des_arr,
4624 	    udp_opt_obj.odb_opt_arr_cnt);
4625 
4626 	/*
4627 	 * We want to be informed each time a stack is created or
4628 	 * destroyed in the kernel, so we can maintain the
4629 	 * set of udp_stack_t's.
4630 	 */
4631 	netstack_register(NS_UDP, udp_stack_init, NULL, udp_stack_fini);
4632 }
4633 
4634 void
4635 udp_ddi_g_destroy(void)
4636 {
4637 	netstack_unregister(NS_UDP);
4638 }
4639 
4640 #define	INET_NAME	"ip"
4641 
4642 /*
4643  * Initialize the UDP stack instance.
4644  */
4645 static void *
4646 udp_stack_init(netstackid_t stackid, netstack_t *ns)
4647 {
4648 	udp_stack_t	*us;
4649 	int		i;
4650 	int		error = 0;
4651 	major_t		major;
4652 	size_t		arrsz;
4653 
4654 	us = (udp_stack_t *)kmem_zalloc(sizeof (*us), KM_SLEEP);
4655 	us->us_netstack = ns;
4656 
4657 	mutex_init(&us->us_epriv_port_lock, NULL, MUTEX_DEFAULT, NULL);
4658 	us->us_num_epriv_ports = UDP_NUM_EPRIV_PORTS;
4659 	us->us_epriv_ports[0] = ULP_DEF_EPRIV_PORT1;
4660 	us->us_epriv_ports[1] = ULP_DEF_EPRIV_PORT2;
4661 
4662 	/*
4663 	 * The smallest anonymous port in the priviledged port range which UDP
4664 	 * looks for free port.  Use in the option UDP_ANONPRIVBIND.
4665 	 */
4666 	us->us_min_anonpriv_port = 512;
4667 
4668 	us->us_bind_fanout_size = udp_bind_fanout_size;
4669 
4670 	/* Roundup variable that might have been modified in /etc/system */
4671 	if (us->us_bind_fanout_size & (us->us_bind_fanout_size - 1)) {
4672 		/* Not a power of two. Round up to nearest power of two */
4673 		for (i = 0; i < 31; i++) {
4674 			if (us->us_bind_fanout_size < (1 << i))
4675 				break;
4676 		}
4677 		us->us_bind_fanout_size = 1 << i;
4678 	}
4679 	us->us_bind_fanout = kmem_zalloc(us->us_bind_fanout_size *
4680 	    sizeof (udp_fanout_t), KM_SLEEP);
4681 	for (i = 0; i < us->us_bind_fanout_size; i++) {
4682 		mutex_init(&us->us_bind_fanout[i].uf_lock, NULL, MUTEX_DEFAULT,
4683 		    NULL);
4684 	}
4685 
4686 	arrsz = udp_propinfo_count * sizeof (mod_prop_info_t);
4687 	us->us_propinfo_tbl = (mod_prop_info_t *)kmem_alloc(arrsz,
4688 	    KM_SLEEP);
4689 	bcopy(udp_propinfo_tbl, us->us_propinfo_tbl, arrsz);
4690 
4691 	us->us_kstat = udp_kstat2_init(stackid, &us->us_statistics);
4692 	us->us_mibkp = udp_kstat_init(stackid);
4693 
4694 	major = mod_name_to_major(INET_NAME);
4695 	error = ldi_ident_from_major(major, &us->us_ldi_ident);
4696 	ASSERT(error == 0);
4697 	return (us);
4698 }
4699 
4700 /*
4701  * Free the UDP stack instance.
4702  */
4703 static void
4704 udp_stack_fini(netstackid_t stackid, void *arg)
4705 {
4706 	udp_stack_t *us = (udp_stack_t *)arg;
4707 	int i;
4708 
4709 	for (i = 0; i < us->us_bind_fanout_size; i++) {
4710 		mutex_destroy(&us->us_bind_fanout[i].uf_lock);
4711 	}
4712 
4713 	kmem_free(us->us_bind_fanout, us->us_bind_fanout_size *
4714 	    sizeof (udp_fanout_t));
4715 
4716 	us->us_bind_fanout = NULL;
4717 
4718 	kmem_free(us->us_propinfo_tbl,
4719 	    udp_propinfo_count * sizeof (mod_prop_info_t));
4720 	us->us_propinfo_tbl = NULL;
4721 
4722 	udp_kstat_fini(stackid, us->us_mibkp);
4723 	us->us_mibkp = NULL;
4724 
4725 	udp_kstat2_fini(stackid, us->us_kstat);
4726 	us->us_kstat = NULL;
4727 	bzero(&us->us_statistics, sizeof (us->us_statistics));
4728 
4729 	mutex_destroy(&us->us_epriv_port_lock);
4730 	ldi_ident_release(us->us_ldi_ident);
4731 	kmem_free(us, sizeof (*us));
4732 }
4733 
4734 static void *
4735 udp_kstat2_init(netstackid_t stackid, udp_stat_t *us_statisticsp)
4736 {
4737 	kstat_t *ksp;
4738 
4739 	udp_stat_t template = {
4740 		{ "udp_sock_fallback",		KSTAT_DATA_UINT64 },
4741 		{ "udp_out_opt",		KSTAT_DATA_UINT64 },
4742 		{ "udp_out_err_notconn",	KSTAT_DATA_UINT64 },
4743 		{ "udp_out_err_output",		KSTAT_DATA_UINT64 },
4744 		{ "udp_out_err_tudr",		KSTAT_DATA_UINT64 },
4745 #ifdef DEBUG
4746 		{ "udp_data_conn",		KSTAT_DATA_UINT64 },
4747 		{ "udp_data_notconn",		KSTAT_DATA_UINT64 },
4748 		{ "udp_out_lastdst",		KSTAT_DATA_UINT64 },
4749 		{ "udp_out_diffdst",		KSTAT_DATA_UINT64 },
4750 		{ "udp_out_ipv6",		KSTAT_DATA_UINT64 },
4751 		{ "udp_out_mapped",		KSTAT_DATA_UINT64 },
4752 		{ "udp_out_ipv4",		KSTAT_DATA_UINT64 },
4753 #endif
4754 	};
4755 
4756 	ksp = kstat_create_netstack(UDP_MOD_NAME, 0, "udpstat", "net",
4757 	    KSTAT_TYPE_NAMED, sizeof (template) / sizeof (kstat_named_t),
4758 	    KSTAT_FLAG_VIRTUAL, stackid);
4759 
4760 	if (ksp == NULL)
4761 		return (NULL);
4762 
4763 	bcopy(&template, us_statisticsp, sizeof (template));
4764 	ksp->ks_data = (void *)us_statisticsp;
4765 	ksp->ks_private = (void *)(uintptr_t)stackid;
4766 
4767 	kstat_install(ksp);
4768 	return (ksp);
4769 }
4770 
4771 static void
4772 udp_kstat2_fini(netstackid_t stackid, kstat_t *ksp)
4773 {
4774 	if (ksp != NULL) {
4775 		ASSERT(stackid == (netstackid_t)(uintptr_t)ksp->ks_private);
4776 		kstat_delete_netstack(ksp, stackid);
4777 	}
4778 }
4779 
4780 static void *
4781 udp_kstat_init(netstackid_t stackid)
4782 {
4783 	kstat_t	*ksp;
4784 
4785 	udp_named_kstat_t template = {
4786 		{ "inDatagrams",	KSTAT_DATA_UINT64, 0 },
4787 		{ "inErrors",		KSTAT_DATA_UINT32, 0 },
4788 		{ "outDatagrams",	KSTAT_DATA_UINT64, 0 },
4789 		{ "entrySize",		KSTAT_DATA_INT32, 0 },
4790 		{ "entry6Size",		KSTAT_DATA_INT32, 0 },
4791 		{ "outErrors",		KSTAT_DATA_UINT32, 0 },
4792 	};
4793 
4794 	ksp = kstat_create_netstack(UDP_MOD_NAME, 0, UDP_MOD_NAME, "mib2",
4795 	    KSTAT_TYPE_NAMED,
4796 	    NUM_OF_FIELDS(udp_named_kstat_t), 0, stackid);
4797 
4798 	if (ksp == NULL || ksp->ks_data == NULL)
4799 		return (NULL);
4800 
4801 	template.entrySize.value.ui32 = sizeof (mib2_udpEntry_t);
4802 	template.entry6Size.value.ui32 = sizeof (mib2_udp6Entry_t);
4803 
4804 	bcopy(&template, ksp->ks_data, sizeof (template));
4805 	ksp->ks_update = udp_kstat_update;
4806 	ksp->ks_private = (void *)(uintptr_t)stackid;
4807 
4808 	kstat_install(ksp);
4809 	return (ksp);
4810 }
4811 
4812 static void
4813 udp_kstat_fini(netstackid_t stackid, kstat_t *ksp)
4814 {
4815 	if (ksp != NULL) {
4816 		ASSERT(stackid == (netstackid_t)(uintptr_t)ksp->ks_private);
4817 		kstat_delete_netstack(ksp, stackid);
4818 	}
4819 }
4820 
4821 static int
4822 udp_kstat_update(kstat_t *kp, int rw)
4823 {
4824 	udp_named_kstat_t *udpkp;
4825 	netstackid_t	stackid = (netstackid_t)(uintptr_t)kp->ks_private;
4826 	netstack_t	*ns;
4827 	udp_stack_t	*us;
4828 
4829 	if ((kp == NULL) || (kp->ks_data == NULL))
4830 		return (EIO);
4831 
4832 	if (rw == KSTAT_WRITE)
4833 		return (EACCES);
4834 
4835 	ns = netstack_find_by_stackid(stackid);
4836 	if (ns == NULL)
4837 		return (-1);
4838 	us = ns->netstack_udp;
4839 	if (us == NULL) {
4840 		netstack_rele(ns);
4841 		return (-1);
4842 	}
4843 	udpkp = (udp_named_kstat_t *)kp->ks_data;
4844 
4845 	udpkp->inDatagrams.value.ui64 =	us->us_udp_mib.udpHCInDatagrams;
4846 	udpkp->inErrors.value.ui32 =	us->us_udp_mib.udpInErrors;
4847 	udpkp->outDatagrams.value.ui64 = us->us_udp_mib.udpHCOutDatagrams;
4848 	udpkp->outErrors.value.ui32 =	us->us_udp_mib.udpOutErrors;
4849 	netstack_rele(ns);
4850 	return (0);
4851 }
4852 
4853 static size_t
4854 udp_set_rcv_hiwat(udp_t *udp, size_t size)
4855 {
4856 	udp_stack_t *us = udp->udp_us;
4857 
4858 	/* We add a bit of extra buffering */
4859 	size += size >> 1;
4860 	if (size > us->us_max_buf)
4861 		size = us->us_max_buf;
4862 
4863 	udp->udp_rcv_hiwat = size;
4864 	return (size);
4865 }
4866 
4867 /*
4868  * For the lower queue so that UDP can be a dummy mux.
4869  * Nobody should be sending
4870  * packets up this stream
4871  */
4872 static void
4873 udp_lrput(queue_t *q, mblk_t *mp)
4874 {
4875 	switch (mp->b_datap->db_type) {
4876 	case M_FLUSH:
4877 		/* Turn around */
4878 		if (*mp->b_rptr & FLUSHW) {
4879 			*mp->b_rptr &= ~FLUSHR;
4880 			qreply(q, mp);
4881 			return;
4882 		}
4883 		break;
4884 	}
4885 	freemsg(mp);
4886 }
4887 
4888 /*
4889  * For the lower queue so that UDP can be a dummy mux.
4890  * Nobody should be sending packets down this stream.
4891  */
4892 /* ARGSUSED */
4893 void
4894 udp_lwput(queue_t *q, mblk_t *mp)
4895 {
4896 	freemsg(mp);
4897 }
4898 
4899 /*
4900  * Below routines for UDP socket module.
4901  */
4902 
4903 static conn_t *
4904 udp_do_open(cred_t *credp, boolean_t isv6, int flags, int *errorp)
4905 {
4906 	udp_t		*udp;
4907 	conn_t		*connp;
4908 	zoneid_t 	zoneid;
4909 	netstack_t 	*ns;
4910 	udp_stack_t 	*us;
4911 	int		len;
4912 
4913 	ASSERT(errorp != NULL);
4914 
4915 	if ((*errorp = secpolicy_basic_net_access(credp)) != 0)
4916 		return (NULL);
4917 
4918 	ns = netstack_find_by_cred(credp);
4919 	ASSERT(ns != NULL);
4920 	us = ns->netstack_udp;
4921 	ASSERT(us != NULL);
4922 
4923 	/*
4924 	 * For exclusive stacks we set the zoneid to zero
4925 	 * to make UDP operate as if in the global zone.
4926 	 */
4927 	if (ns->netstack_stackid != GLOBAL_NETSTACKID)
4928 		zoneid = GLOBAL_ZONEID;
4929 	else
4930 		zoneid = crgetzoneid(credp);
4931 
4932 	ASSERT(flags == KM_SLEEP || flags == KM_NOSLEEP);
4933 
4934 	connp = ipcl_conn_create(IPCL_UDPCONN, flags, ns);
4935 	if (connp == NULL) {
4936 		netstack_rele(ns);
4937 		*errorp = ENOMEM;
4938 		return (NULL);
4939 	}
4940 	udp = connp->conn_udp;
4941 
4942 	/*
4943 	 * ipcl_conn_create did a netstack_hold. Undo the hold that was
4944 	 * done by netstack_find_by_cred()
4945 	 */
4946 	netstack_rele(ns);
4947 
4948 	/*
4949 	 * Since this conn_t/udp_t is not yet visible to anybody else we don't
4950 	 * need to lock anything.
4951 	 */
4952 	ASSERT(connp->conn_proto == IPPROTO_UDP);
4953 	ASSERT(connp->conn_udp == udp);
4954 	ASSERT(udp->udp_connp == connp);
4955 
4956 	/* Set the initial state of the stream and the privilege status. */
4957 	udp->udp_state = TS_UNBND;
4958 	connp->conn_ixa->ixa_flags |= IXAF_VERIFY_SOURCE;
4959 	if (isv6) {
4960 		connp->conn_family = AF_INET6;
4961 		connp->conn_ipversion = IPV6_VERSION;
4962 		connp->conn_ixa->ixa_flags &= ~IXAF_IS_IPV4;
4963 		connp->conn_default_ttl = us->us_ipv6_hoplimit;
4964 		len = sizeof (ip6_t) + UDPH_SIZE;
4965 	} else {
4966 		connp->conn_family = AF_INET;
4967 		connp->conn_ipversion = IPV4_VERSION;
4968 		connp->conn_ixa->ixa_flags |= IXAF_IS_IPV4;
4969 		connp->conn_default_ttl = us->us_ipv4_ttl;
4970 		len = sizeof (ipha_t) + UDPH_SIZE;
4971 	}
4972 
4973 	ASSERT(connp->conn_ixa->ixa_protocol == connp->conn_proto);
4974 	connp->conn_xmit_ipp.ipp_unicast_hops = connp->conn_default_ttl;
4975 
4976 	connp->conn_ixa->ixa_multicast_ttl = IP_DEFAULT_MULTICAST_TTL;
4977 	connp->conn_ixa->ixa_flags |= IXAF_MULTICAST_LOOP | IXAF_SET_ULP_CKSUM;
4978 	/* conn_allzones can not be set this early, hence no IPCL_ZONEID */
4979 	connp->conn_ixa->ixa_zoneid = zoneid;
4980 
4981 	connp->conn_zoneid = zoneid;
4982 
4983 	/*
4984 	 * If the caller has the process-wide flag set, then default to MAC
4985 	 * exempt mode.  This allows read-down to unlabeled hosts.
4986 	 */
4987 	if (getpflags(NET_MAC_AWARE, credp) != 0)
4988 		connp->conn_mac_mode = CONN_MAC_AWARE;
4989 
4990 	connp->conn_zone_is_global = (crgetzoneid(credp) == GLOBAL_ZONEID);
4991 
4992 	udp->udp_us = us;
4993 
4994 	connp->conn_rcvbuf = us->us_recv_hiwat;
4995 	connp->conn_sndbuf = us->us_xmit_hiwat;
4996 	connp->conn_sndlowat = us->us_xmit_lowat;
4997 	connp->conn_rcvlowat = udp_mod_info.mi_lowat;
4998 
4999 	connp->conn_wroff = len + us->us_wroff_extra;
5000 	connp->conn_so_type = SOCK_DGRAM;
5001 
5002 	connp->conn_recv = udp_input;
5003 	connp->conn_recvicmp = udp_icmp_input;
5004 	crhold(credp);
5005 	connp->conn_cred = credp;
5006 	connp->conn_cpid = curproc->p_pid;
5007 	connp->conn_open_time = ddi_get_lbolt64();
5008 	/* Cache things in ixa without an extra refhold */
5009 	ASSERT(!(connp->conn_ixa->ixa_free_flags & IXA_FREE_CRED));
5010 	connp->conn_ixa->ixa_cred = connp->conn_cred;
5011 	connp->conn_ixa->ixa_cpid = connp->conn_cpid;
5012 	if (is_system_labeled())
5013 		connp->conn_ixa->ixa_tsl = crgetlabel(connp->conn_cred);
5014 
5015 	*((sin6_t *)&udp->udp_delayed_addr) = sin6_null;
5016 
5017 	if (us->us_pmtu_discovery)
5018 		connp->conn_ixa->ixa_flags |= IXAF_PMTU_DISCOVERY;
5019 
5020 	return (connp);
5021 }
5022 
5023 sock_lower_handle_t
5024 udp_create(int family, int type, int proto, sock_downcalls_t **sock_downcalls,
5025     uint_t *smodep, int *errorp, int flags, cred_t *credp)
5026 {
5027 	udp_t		*udp = NULL;
5028 	udp_stack_t	*us;
5029 	conn_t		*connp;
5030 	boolean_t	isv6;
5031 
5032 	if (type != SOCK_DGRAM || (family != AF_INET && family != AF_INET6) ||
5033 	    (proto != 0 && proto != IPPROTO_UDP)) {
5034 		*errorp = EPROTONOSUPPORT;
5035 		return (NULL);
5036 	}
5037 
5038 	if (family == AF_INET6)
5039 		isv6 = B_TRUE;
5040 	else
5041 		isv6 = B_FALSE;
5042 
5043 	connp = udp_do_open(credp, isv6, flags, errorp);
5044 	if (connp == NULL)
5045 		return (NULL);
5046 
5047 	udp = connp->conn_udp;
5048 	ASSERT(udp != NULL);
5049 	us = udp->udp_us;
5050 	ASSERT(us != NULL);
5051 
5052 	udp->udp_issocket = B_TRUE;
5053 	connp->conn_flags |= IPCL_NONSTR;
5054 
5055 	/*
5056 	 * Set flow control
5057 	 * Since this conn_t/udp_t is not yet visible to anybody else we don't
5058 	 * need to lock anything.
5059 	 */
5060 	(void) udp_set_rcv_hiwat(udp, connp->conn_rcvbuf);
5061 	udp->udp_rcv_disply_hiwat = connp->conn_rcvbuf;
5062 
5063 	connp->conn_flow_cntrld = B_FALSE;
5064 
5065 	mutex_enter(&connp->conn_lock);
5066 	connp->conn_state_flags &= ~CONN_INCIPIENT;
5067 	mutex_exit(&connp->conn_lock);
5068 
5069 	*errorp = 0;
5070 	*smodep = SM_ATOMIC;
5071 	*sock_downcalls = &sock_udp_downcalls;
5072 	return ((sock_lower_handle_t)connp);
5073 }
5074 
5075 /* ARGSUSED3 */
5076 void
5077 udp_activate(sock_lower_handle_t proto_handle, sock_upper_handle_t sock_handle,
5078     sock_upcalls_t *sock_upcalls, int flags, cred_t *cr)
5079 {
5080 	conn_t 		*connp = (conn_t *)proto_handle;
5081 	struct sock_proto_props sopp;
5082 
5083 	/* All Solaris components should pass a cred for this operation. */
5084 	ASSERT(cr != NULL);
5085 
5086 	connp->conn_upcalls = sock_upcalls;
5087 	connp->conn_upper_handle = sock_handle;
5088 
5089 	sopp.sopp_flags = SOCKOPT_WROFF | SOCKOPT_RCVHIWAT | SOCKOPT_RCVLOWAT |
5090 	    SOCKOPT_MAXBLK | SOCKOPT_MAXPSZ | SOCKOPT_MINPSZ;
5091 	sopp.sopp_wroff = connp->conn_wroff;
5092 	sopp.sopp_maxblk = INFPSZ;
5093 	sopp.sopp_rxhiwat = connp->conn_rcvbuf;
5094 	sopp.sopp_rxlowat = connp->conn_rcvlowat;
5095 	sopp.sopp_maxaddrlen = sizeof (sin6_t);
5096 	sopp.sopp_maxpsz =
5097 	    (connp->conn_family == AF_INET) ? UDP_MAXPACKET_IPV4 :
5098 	    UDP_MAXPACKET_IPV6;
5099 	sopp.sopp_minpsz = (udp_mod_info.mi_minpsz == 1) ? 0 :
5100 	    udp_mod_info.mi_minpsz;
5101 
5102 	(*connp->conn_upcalls->su_set_proto_props)(connp->conn_upper_handle,
5103 	    &sopp);
5104 }
5105 
5106 static void
5107 udp_do_close(conn_t *connp)
5108 {
5109 	udp_t	*udp;
5110 
5111 	ASSERT(connp != NULL && IPCL_IS_UDP(connp));
5112 	udp = connp->conn_udp;
5113 
5114 	if (cl_inet_unbind != NULL && udp->udp_state == TS_IDLE) {
5115 		/*
5116 		 * Running in cluster mode - register unbind information
5117 		 */
5118 		if (connp->conn_ipversion == IPV4_VERSION) {
5119 			(*cl_inet_unbind)(
5120 			    connp->conn_netstack->netstack_stackid,
5121 			    IPPROTO_UDP, AF_INET,
5122 			    (uint8_t *)(&V4_PART_OF_V6(connp->conn_laddr_v6)),
5123 			    (in_port_t)connp->conn_lport, NULL);
5124 		} else {
5125 			(*cl_inet_unbind)(
5126 			    connp->conn_netstack->netstack_stackid,
5127 			    IPPROTO_UDP, AF_INET6,
5128 			    (uint8_t *)&(connp->conn_laddr_v6),
5129 			    (in_port_t)connp->conn_lport, NULL);
5130 		}
5131 	}
5132 
5133 	udp_bind_hash_remove(udp, B_FALSE);
5134 
5135 	ip_quiesce_conn(connp);
5136 
5137 	if (!IPCL_IS_NONSTR(connp)) {
5138 		ASSERT(connp->conn_wq != NULL);
5139 		ASSERT(connp->conn_rq != NULL);
5140 		qprocsoff(connp->conn_rq);
5141 	}
5142 
5143 	udp_close_free(connp);
5144 
5145 	/*
5146 	 * Now we are truly single threaded on this stream, and can
5147 	 * delete the things hanging off the connp, and finally the connp.
5148 	 * We removed this connp from the fanout list, it cannot be
5149 	 * accessed thru the fanouts, and we already waited for the
5150 	 * conn_ref to drop to 0. We are already in close, so
5151 	 * there cannot be any other thread from the top. qprocsoff
5152 	 * has completed, and service has completed or won't run in
5153 	 * future.
5154 	 */
5155 	ASSERT(connp->conn_ref == 1);
5156 
5157 	if (!IPCL_IS_NONSTR(connp)) {
5158 		inet_minor_free(connp->conn_minor_arena, connp->conn_dev);
5159 	} else {
5160 		ip_free_helper_stream(connp);
5161 	}
5162 
5163 	connp->conn_ref--;
5164 	ipcl_conn_destroy(connp);
5165 }
5166 
5167 /* ARGSUSED1 */
5168 int
5169 udp_close(sock_lower_handle_t proto_handle, int flags, cred_t *cr)
5170 {
5171 	conn_t	*connp = (conn_t *)proto_handle;
5172 
5173 	/* All Solaris components should pass a cred for this operation. */
5174 	ASSERT(cr != NULL);
5175 
5176 	udp_do_close(connp);
5177 	return (0);
5178 }
5179 
5180 static int
5181 udp_do_bind(conn_t *connp, struct sockaddr *sa, socklen_t len, cred_t *cr,
5182     boolean_t bind_to_req_port_only)
5183 {
5184 	sin_t		*sin;
5185 	sin6_t		*sin6;
5186 	udp_t		*udp = connp->conn_udp;
5187 	int		error = 0;
5188 	ip_laddr_t	laddr_type = IPVL_UNICAST_UP;	/* INADDR_ANY */
5189 	in_port_t	port;		/* Host byte order */
5190 	in_port_t	requested_port;	/* Host byte order */
5191 	int		count;
5192 	ipaddr_t	v4src;		/* Set if AF_INET */
5193 	in6_addr_t	v6src;
5194 	int		loopmax;
5195 	udp_fanout_t	*udpf;
5196 	in_port_t	lport;		/* Network byte order */
5197 	uint_t		scopeid = 0;
5198 	zoneid_t	zoneid = IPCL_ZONEID(connp);
5199 	ip_stack_t	*ipst = connp->conn_netstack->netstack_ip;
5200 	boolean_t	is_inaddr_any;
5201 	mlp_type_t	addrtype, mlptype;
5202 	udp_stack_t	*us = udp->udp_us;
5203 
5204 	switch (len) {
5205 	case sizeof (sin_t):	/* Complete IPv4 address */
5206 		sin = (sin_t *)sa;
5207 
5208 		if (sin == NULL || !OK_32PTR((char *)sin))
5209 			return (EINVAL);
5210 
5211 		if (connp->conn_family != AF_INET ||
5212 		    sin->sin_family != AF_INET) {
5213 			return (EAFNOSUPPORT);
5214 		}
5215 		v4src = sin->sin_addr.s_addr;
5216 		IN6_IPADDR_TO_V4MAPPED(v4src, &v6src);
5217 		if (v4src != INADDR_ANY) {
5218 			laddr_type = ip_laddr_verify_v4(v4src, zoneid, ipst,
5219 			    B_TRUE);
5220 		}
5221 		port = ntohs(sin->sin_port);
5222 		break;
5223 
5224 	case sizeof (sin6_t):	/* complete IPv6 address */
5225 		sin6 = (sin6_t *)sa;
5226 
5227 		if (sin6 == NULL || !OK_32PTR((char *)sin6))
5228 			return (EINVAL);
5229 
5230 		if (connp->conn_family != AF_INET6 ||
5231 		    sin6->sin6_family != AF_INET6) {
5232 			return (EAFNOSUPPORT);
5233 		}
5234 		v6src = sin6->sin6_addr;
5235 		if (IN6_IS_ADDR_V4MAPPED(&v6src)) {
5236 			if (connp->conn_ipv6_v6only)
5237 				return (EADDRNOTAVAIL);
5238 
5239 			IN6_V4MAPPED_TO_IPADDR(&v6src, v4src);
5240 			if (v4src != INADDR_ANY) {
5241 				laddr_type = ip_laddr_verify_v4(v4src,
5242 				    zoneid, ipst, B_FALSE);
5243 			}
5244 		} else {
5245 			if (!IN6_IS_ADDR_UNSPECIFIED(&v6src)) {
5246 				if (IN6_IS_ADDR_LINKSCOPE(&v6src))
5247 					scopeid = sin6->sin6_scope_id;
5248 				laddr_type = ip_laddr_verify_v6(&v6src,
5249 				    zoneid, ipst, B_TRUE, scopeid);
5250 			}
5251 		}
5252 		port = ntohs(sin6->sin6_port);
5253 		break;
5254 
5255 	default:		/* Invalid request */
5256 		(void) strlog(UDP_MOD_ID, 0, 1, SL_ERROR|SL_TRACE,
5257 		    "udp_bind: bad ADDR_length length %u", len);
5258 		return (-TBADADDR);
5259 	}
5260 
5261 	/* Is the local address a valid unicast, multicast, or broadcast? */
5262 	if (laddr_type == IPVL_BAD)
5263 		return (EADDRNOTAVAIL);
5264 
5265 	requested_port = port;
5266 
5267 	if (requested_port == 0 || !bind_to_req_port_only)
5268 		bind_to_req_port_only = B_FALSE;
5269 	else		/* T_BIND_REQ and requested_port != 0 */
5270 		bind_to_req_port_only = B_TRUE;
5271 
5272 	if (requested_port == 0) {
5273 		/*
5274 		 * If the application passed in zero for the port number, it
5275 		 * doesn't care which port number we bind to. Get one in the
5276 		 * valid range.
5277 		 */
5278 		if (connp->conn_anon_priv_bind) {
5279 			port = udp_get_next_priv_port(udp);
5280 		} else {
5281 			port = udp_update_next_port(udp,
5282 			    us->us_next_port_to_try, B_TRUE);
5283 		}
5284 	} else {
5285 		/*
5286 		 * If the port is in the well-known privileged range,
5287 		 * make sure the caller was privileged.
5288 		 */
5289 		int i;
5290 		boolean_t priv = B_FALSE;
5291 
5292 		if (port < us->us_smallest_nonpriv_port) {
5293 			priv = B_TRUE;
5294 		} else {
5295 			for (i = 0; i < us->us_num_epriv_ports; i++) {
5296 				if (port == us->us_epriv_ports[i]) {
5297 					priv = B_TRUE;
5298 					break;
5299 				}
5300 			}
5301 		}
5302 
5303 		if (priv) {
5304 			if (secpolicy_net_privaddr(cr, port, IPPROTO_UDP) != 0)
5305 				return (-TACCES);
5306 		}
5307 	}
5308 
5309 	if (port == 0)
5310 		return (-TNOADDR);
5311 
5312 	/*
5313 	 * The state must be TS_UNBND. TPI mandates that users must send
5314 	 * TPI primitives only 1 at a time and wait for the response before
5315 	 * sending the next primitive.
5316 	 */
5317 	mutex_enter(&connp->conn_lock);
5318 	if (udp->udp_state != TS_UNBND) {
5319 		mutex_exit(&connp->conn_lock);
5320 		(void) strlog(UDP_MOD_ID, 0, 1, SL_ERROR|SL_TRACE,
5321 		    "udp_bind: bad state, %u", udp->udp_state);
5322 		return (-TOUTSTATE);
5323 	}
5324 	/*
5325 	 * Copy the source address into our udp structure. This address
5326 	 * may still be zero; if so, IP will fill in the correct address
5327 	 * each time an outbound packet is passed to it. Since the udp is
5328 	 * not yet in the bind hash list, we don't grab the uf_lock to
5329 	 * change conn_ipversion
5330 	 */
5331 	if (connp->conn_family == AF_INET) {
5332 		ASSERT(sin != NULL);
5333 		ASSERT(connp->conn_ixa->ixa_flags & IXAF_IS_IPV4);
5334 	} else {
5335 		if (IN6_IS_ADDR_V4MAPPED(&v6src)) {
5336 			/*
5337 			 * no need to hold the uf_lock to set the conn_ipversion
5338 			 * since we are not yet in the fanout list
5339 			 */
5340 			connp->conn_ipversion = IPV4_VERSION;
5341 			connp->conn_ixa->ixa_flags |= IXAF_IS_IPV4;
5342 		} else {
5343 			connp->conn_ipversion = IPV6_VERSION;
5344 			connp->conn_ixa->ixa_flags &= ~IXAF_IS_IPV4;
5345 		}
5346 	}
5347 
5348 	/*
5349 	 * If conn_reuseaddr is not set, then we have to make sure that
5350 	 * the IP address and port number the application requested
5351 	 * (or we selected for the application) is not being used by
5352 	 * another stream.  If another stream is already using the
5353 	 * requested IP address and port, the behavior depends on
5354 	 * "bind_to_req_port_only". If set the bind fails; otherwise we
5355 	 * search for any an unused port to bind to the stream.
5356 	 *
5357 	 * As per the BSD semantics, as modified by the Deering multicast
5358 	 * changes, if udp_reuseaddr is set, then we allow multiple binds
5359 	 * to the same port independent of the local IP address.
5360 	 *
5361 	 * This is slightly different than in SunOS 4.X which did not
5362 	 * support IP multicast. Note that the change implemented by the
5363 	 * Deering multicast code effects all binds - not only binding
5364 	 * to IP multicast addresses.
5365 	 *
5366 	 * Note that when binding to port zero we ignore SO_REUSEADDR in
5367 	 * order to guarantee a unique port.
5368 	 */
5369 
5370 	count = 0;
5371 	if (connp->conn_anon_priv_bind) {
5372 		/*
5373 		 * loopmax = (IPPORT_RESERVED-1) -
5374 		 *    us->us_min_anonpriv_port + 1
5375 		 */
5376 		loopmax = IPPORT_RESERVED - us->us_min_anonpriv_port;
5377 	} else {
5378 		loopmax = us->us_largest_anon_port -
5379 		    us->us_smallest_anon_port + 1;
5380 	}
5381 
5382 	is_inaddr_any = V6_OR_V4_INADDR_ANY(v6src);
5383 
5384 	for (;;) {
5385 		udp_t		*udp1;
5386 		boolean_t	found_exclbind = B_FALSE;
5387 		conn_t		*connp1;
5388 
5389 		/*
5390 		 * Walk through the list of udp streams bound to
5391 		 * requested port with the same IP address.
5392 		 */
5393 		lport = htons(port);
5394 		udpf = &us->us_bind_fanout[UDP_BIND_HASH(lport,
5395 		    us->us_bind_fanout_size)];
5396 		mutex_enter(&udpf->uf_lock);
5397 		for (udp1 = udpf->uf_udp; udp1 != NULL;
5398 		    udp1 = udp1->udp_bind_hash) {
5399 			connp1 = udp1->udp_connp;
5400 
5401 			if (lport != connp1->conn_lport)
5402 				continue;
5403 
5404 			/*
5405 			 * On a labeled system, we must treat bindings to ports
5406 			 * on shared IP addresses by sockets with MAC exemption
5407 			 * privilege as being in all zones, as there's
5408 			 * otherwise no way to identify the right receiver.
5409 			 */
5410 			if (!IPCL_BIND_ZONE_MATCH(connp1, connp))
5411 				continue;
5412 
5413 			/*
5414 			 * If UDP_EXCLBIND is set for either the bound or
5415 			 * binding endpoint, the semantics of bind
5416 			 * is changed according to the following chart.
5417 			 *
5418 			 * spec = specified address (v4 or v6)
5419 			 * unspec = unspecified address (v4 or v6)
5420 			 * A = specified addresses are different for endpoints
5421 			 *
5422 			 * bound	bind to		allowed?
5423 			 * -------------------------------------
5424 			 * unspec	unspec		no
5425 			 * unspec	spec		no
5426 			 * spec		unspec		no
5427 			 * spec		spec		yes if A
5428 			 *
5429 			 * For labeled systems, SO_MAC_EXEMPT behaves the same
5430 			 * as UDP_EXCLBIND, except that zoneid is ignored.
5431 			 */
5432 			if (connp1->conn_exclbind || connp->conn_exclbind ||
5433 			    IPCL_CONNS_MAC(udp1->udp_connp, connp)) {
5434 				if (V6_OR_V4_INADDR_ANY(
5435 				    connp1->conn_bound_addr_v6) ||
5436 				    is_inaddr_any ||
5437 				    IN6_ARE_ADDR_EQUAL(
5438 				    &connp1->conn_bound_addr_v6,
5439 				    &v6src)) {
5440 					found_exclbind = B_TRUE;
5441 					break;
5442 				}
5443 				continue;
5444 			}
5445 
5446 			/*
5447 			 * Check ipversion to allow IPv4 and IPv6 sockets to
5448 			 * have disjoint port number spaces.
5449 			 */
5450 			if (connp->conn_ipversion != connp1->conn_ipversion) {
5451 
5452 				/*
5453 				 * On the first time through the loop, if the
5454 				 * the user intentionally specified a
5455 				 * particular port number, then ignore any
5456 				 * bindings of the other protocol that may
5457 				 * conflict. This allows the user to bind IPv6
5458 				 * alone and get both v4 and v6, or bind both
5459 				 * both and get each seperately. On subsequent
5460 				 * times through the loop, we're checking a
5461 				 * port that we chose (not the user) and thus
5462 				 * we do not allow casual duplicate bindings.
5463 				 */
5464 				if (count == 0 && requested_port != 0)
5465 					continue;
5466 			}
5467 
5468 			/*
5469 			 * No difference depending on SO_REUSEADDR.
5470 			 *
5471 			 * If existing port is bound to a
5472 			 * non-wildcard IP address and
5473 			 * the requesting stream is bound to
5474 			 * a distinct different IP addresses
5475 			 * (non-wildcard, also), keep going.
5476 			 */
5477 			if (!is_inaddr_any &&
5478 			    !V6_OR_V4_INADDR_ANY(connp1->conn_bound_addr_v6) &&
5479 			    !IN6_ARE_ADDR_EQUAL(&connp1->conn_laddr_v6,
5480 			    &v6src)) {
5481 				continue;
5482 			}
5483 			break;
5484 		}
5485 
5486 		if (!found_exclbind &&
5487 		    (connp->conn_reuseaddr && requested_port != 0)) {
5488 			break;
5489 		}
5490 
5491 		if (udp1 == NULL) {
5492 			/*
5493 			 * No other stream has this IP address
5494 			 * and port number. We can use it.
5495 			 */
5496 			break;
5497 		}
5498 		mutex_exit(&udpf->uf_lock);
5499 		if (bind_to_req_port_only) {
5500 			/*
5501 			 * We get here only when requested port
5502 			 * is bound (and only first  of the for()
5503 			 * loop iteration).
5504 			 *
5505 			 * The semantics of this bind request
5506 			 * require it to fail so we return from
5507 			 * the routine (and exit the loop).
5508 			 *
5509 			 */
5510 			mutex_exit(&connp->conn_lock);
5511 			return (-TADDRBUSY);
5512 		}
5513 
5514 		if (connp->conn_anon_priv_bind) {
5515 			port = udp_get_next_priv_port(udp);
5516 		} else {
5517 			if ((count == 0) && (requested_port != 0)) {
5518 				/*
5519 				 * If the application wants us to find
5520 				 * a port, get one to start with. Set
5521 				 * requested_port to 0, so that we will
5522 				 * update us->us_next_port_to_try below.
5523 				 */
5524 				port = udp_update_next_port(udp,
5525 				    us->us_next_port_to_try, B_TRUE);
5526 				requested_port = 0;
5527 			} else {
5528 				port = udp_update_next_port(udp, port + 1,
5529 				    B_FALSE);
5530 			}
5531 		}
5532 
5533 		if (port == 0 || ++count >= loopmax) {
5534 			/*
5535 			 * We've tried every possible port number and
5536 			 * there are none available, so send an error
5537 			 * to the user.
5538 			 */
5539 			mutex_exit(&connp->conn_lock);
5540 			return (-TNOADDR);
5541 		}
5542 	}
5543 
5544 	/*
5545 	 * Copy the source address into our udp structure.  This address
5546 	 * may still be zero; if so, ip_attr_connect will fill in the correct
5547 	 * address when a packet is about to be sent.
5548 	 * If we are binding to a broadcast or multicast address then
5549 	 * we just set the conn_bound_addr since we don't want to use
5550 	 * that as the source address when sending.
5551 	 */
5552 	connp->conn_bound_addr_v6 = v6src;
5553 	connp->conn_laddr_v6 = v6src;
5554 	if (scopeid != 0) {
5555 		connp->conn_ixa->ixa_flags |= IXAF_SCOPEID_SET;
5556 		connp->conn_ixa->ixa_scopeid = scopeid;
5557 		connp->conn_incoming_ifindex = scopeid;
5558 	} else {
5559 		connp->conn_ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
5560 		connp->conn_incoming_ifindex = connp->conn_bound_if;
5561 	}
5562 
5563 	switch (laddr_type) {
5564 	case IPVL_UNICAST_UP:
5565 	case IPVL_UNICAST_DOWN:
5566 		connp->conn_saddr_v6 = v6src;
5567 		connp->conn_mcbc_bind = B_FALSE;
5568 		break;
5569 	case IPVL_MCAST:
5570 	case IPVL_BCAST:
5571 		/* ip_set_destination will pick a source address later */
5572 		connp->conn_saddr_v6 = ipv6_all_zeros;
5573 		connp->conn_mcbc_bind = B_TRUE;
5574 		break;
5575 	}
5576 
5577 	/* Any errors after this point should use late_error */
5578 	connp->conn_lport = lport;
5579 
5580 	/*
5581 	 * Now reset the next anonymous port if the application requested
5582 	 * an anonymous port, or we handed out the next anonymous port.
5583 	 */
5584 	if ((requested_port == 0) && (!connp->conn_anon_priv_bind)) {
5585 		us->us_next_port_to_try = port + 1;
5586 	}
5587 
5588 	/* Initialize the T_BIND_ACK. */
5589 	if (connp->conn_family == AF_INET) {
5590 		sin->sin_port = connp->conn_lport;
5591 	} else {
5592 		sin6->sin6_port = connp->conn_lport;
5593 	}
5594 	udp->udp_state = TS_IDLE;
5595 	udp_bind_hash_insert(udpf, udp);
5596 	mutex_exit(&udpf->uf_lock);
5597 	mutex_exit(&connp->conn_lock);
5598 
5599 	if (cl_inet_bind) {
5600 		/*
5601 		 * Running in cluster mode - register bind information
5602 		 */
5603 		if (connp->conn_ipversion == IPV4_VERSION) {
5604 			(*cl_inet_bind)(connp->conn_netstack->netstack_stackid,
5605 			    IPPROTO_UDP, AF_INET, (uint8_t *)&v4src,
5606 			    (in_port_t)connp->conn_lport, NULL);
5607 		} else {
5608 			(*cl_inet_bind)(connp->conn_netstack->netstack_stackid,
5609 			    IPPROTO_UDP, AF_INET6, (uint8_t *)&v6src,
5610 			    (in_port_t)connp->conn_lport, NULL);
5611 		}
5612 	}
5613 
5614 	mutex_enter(&connp->conn_lock);
5615 	connp->conn_anon_port = (is_system_labeled() && requested_port == 0);
5616 	if (is_system_labeled() && (!connp->conn_anon_port ||
5617 	    connp->conn_anon_mlp)) {
5618 		uint16_t mlpport;
5619 		zone_t *zone;
5620 
5621 		zone = crgetzone(cr);
5622 		connp->conn_mlp_type =
5623 		    connp->conn_recv_ancillary.crb_recvucred ? mlptBoth :
5624 		    mlptSingle;
5625 		addrtype = tsol_mlp_addr_type(
5626 		    connp->conn_allzones ? ALL_ZONES : zone->zone_id,
5627 		    IPV6_VERSION, &v6src, us->us_netstack->netstack_ip);
5628 		if (addrtype == mlptSingle) {
5629 			error = -TNOADDR;
5630 			mutex_exit(&connp->conn_lock);
5631 			goto late_error;
5632 		}
5633 		mlpport = connp->conn_anon_port ? PMAPPORT : port;
5634 		mlptype = tsol_mlp_port_type(zone, IPPROTO_UDP, mlpport,
5635 		    addrtype);
5636 
5637 		/*
5638 		 * It is a coding error to attempt to bind an MLP port
5639 		 * without first setting SOL_SOCKET/SCM_UCRED.
5640 		 */
5641 		if (mlptype != mlptSingle &&
5642 		    connp->conn_mlp_type == mlptSingle) {
5643 			error = EINVAL;
5644 			mutex_exit(&connp->conn_lock);
5645 			goto late_error;
5646 		}
5647 
5648 		/*
5649 		 * It is an access violation to attempt to bind an MLP port
5650 		 * without NET_BINDMLP privilege.
5651 		 */
5652 		if (mlptype != mlptSingle &&
5653 		    secpolicy_net_bindmlp(cr) != 0) {
5654 			if (connp->conn_debug) {
5655 				(void) strlog(UDP_MOD_ID, 0, 1,
5656 				    SL_ERROR|SL_TRACE,
5657 				    "udp_bind: no priv for multilevel port %d",
5658 				    mlpport);
5659 			}
5660 			error = -TACCES;
5661 			mutex_exit(&connp->conn_lock);
5662 			goto late_error;
5663 		}
5664 
5665 		/*
5666 		 * If we're specifically binding a shared IP address and the
5667 		 * port is MLP on shared addresses, then check to see if this
5668 		 * zone actually owns the MLP.  Reject if not.
5669 		 */
5670 		if (mlptype == mlptShared && addrtype == mlptShared) {
5671 			/*
5672 			 * No need to handle exclusive-stack zones since
5673 			 * ALL_ZONES only applies to the shared stack.
5674 			 */
5675 			zoneid_t mlpzone;
5676 
5677 			mlpzone = tsol_mlp_findzone(IPPROTO_UDP,
5678 			    htons(mlpport));
5679 			if (connp->conn_zoneid != mlpzone) {
5680 				if (connp->conn_debug) {
5681 					(void) strlog(UDP_MOD_ID, 0, 1,
5682 					    SL_ERROR|SL_TRACE,
5683 					    "udp_bind: attempt to bind port "
5684 					    "%d on shared addr in zone %d "
5685 					    "(should be %d)",
5686 					    mlpport, connp->conn_zoneid,
5687 					    mlpzone);
5688 				}
5689 				error = -TACCES;
5690 				mutex_exit(&connp->conn_lock);
5691 				goto late_error;
5692 			}
5693 		}
5694 		if (connp->conn_anon_port) {
5695 			error = tsol_mlp_anon(zone, mlptype, connp->conn_proto,
5696 			    port, B_TRUE);
5697 			if (error != 0) {
5698 				if (connp->conn_debug) {
5699 					(void) strlog(UDP_MOD_ID, 0, 1,
5700 					    SL_ERROR|SL_TRACE,
5701 					    "udp_bind: cannot establish anon "
5702 					    "MLP for port %d", port);
5703 				}
5704 				error = -TACCES;
5705 				mutex_exit(&connp->conn_lock);
5706 				goto late_error;
5707 			}
5708 		}
5709 		connp->conn_mlp_type = mlptype;
5710 	}
5711 
5712 	/*
5713 	 * We create an initial header template here to make a subsequent
5714 	 * sendto have a starting point. Since conn_last_dst is zero the
5715 	 * first sendto will always follow the 'dst changed' code path.
5716 	 * Note that we defer massaging options and the related checksum
5717 	 * adjustment until we have a destination address.
5718 	 */
5719 	error = udp_build_hdr_template(connp, &connp->conn_saddr_v6,
5720 	    &connp->conn_faddr_v6, connp->conn_fport, connp->conn_flowinfo);
5721 	if (error != 0) {
5722 		mutex_exit(&connp->conn_lock);
5723 		goto late_error;
5724 	}
5725 	/* Just in case */
5726 	connp->conn_faddr_v6 = ipv6_all_zeros;
5727 	connp->conn_fport = 0;
5728 	connp->conn_v6lastdst = ipv6_all_zeros;
5729 	mutex_exit(&connp->conn_lock);
5730 
5731 	error = ip_laddr_fanout_insert(connp);
5732 	if (error != 0)
5733 		goto late_error;
5734 
5735 	/* Bind succeeded */
5736 	return (0);
5737 
5738 late_error:
5739 	/* We had already picked the port number, and then the bind failed */
5740 	mutex_enter(&connp->conn_lock);
5741 	udpf = &us->us_bind_fanout[
5742 	    UDP_BIND_HASH(connp->conn_lport,
5743 	    us->us_bind_fanout_size)];
5744 	mutex_enter(&udpf->uf_lock);
5745 	connp->conn_saddr_v6 = ipv6_all_zeros;
5746 	connp->conn_bound_addr_v6 = ipv6_all_zeros;
5747 	connp->conn_laddr_v6 = ipv6_all_zeros;
5748 	if (scopeid != 0) {
5749 		connp->conn_ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
5750 		connp->conn_incoming_ifindex = connp->conn_bound_if;
5751 	}
5752 	udp->udp_state = TS_UNBND;
5753 	udp_bind_hash_remove(udp, B_TRUE);
5754 	connp->conn_lport = 0;
5755 	mutex_exit(&udpf->uf_lock);
5756 	connp->conn_anon_port = B_FALSE;
5757 	connp->conn_mlp_type = mlptSingle;
5758 
5759 	connp->conn_v6lastdst = ipv6_all_zeros;
5760 
5761 	/* Restore the header that was built above - different source address */
5762 	(void) udp_build_hdr_template(connp, &connp->conn_saddr_v6,
5763 	    &connp->conn_faddr_v6, connp->conn_fport, connp->conn_flowinfo);
5764 	mutex_exit(&connp->conn_lock);
5765 	return (error);
5766 }
5767 
5768 int
5769 udp_bind(sock_lower_handle_t proto_handle, struct sockaddr *sa,
5770     socklen_t len, cred_t *cr)
5771 {
5772 	int		error;
5773 	conn_t		*connp;
5774 
5775 	/* All Solaris components should pass a cred for this operation. */
5776 	ASSERT(cr != NULL);
5777 
5778 	connp = (conn_t *)proto_handle;
5779 
5780 	if (sa == NULL)
5781 		error = udp_do_unbind(connp);
5782 	else
5783 		error = udp_do_bind(connp, sa, len, cr, B_TRUE);
5784 
5785 	if (error < 0) {
5786 		if (error == -TOUTSTATE)
5787 			error = EINVAL;
5788 		else
5789 			error = proto_tlitosyserr(-error);
5790 	}
5791 
5792 	return (error);
5793 }
5794 
5795 static int
5796 udp_implicit_bind(conn_t *connp, cred_t *cr)
5797 {
5798 	sin6_t sin6addr;
5799 	sin_t *sin;
5800 	sin6_t *sin6;
5801 	socklen_t len;
5802 	int error;
5803 
5804 	/* All Solaris components should pass a cred for this operation. */
5805 	ASSERT(cr != NULL);
5806 
5807 	if (connp->conn_family == AF_INET) {
5808 		len = sizeof (struct sockaddr_in);
5809 		sin = (sin_t *)&sin6addr;
5810 		*sin = sin_null;
5811 		sin->sin_family = AF_INET;
5812 		sin->sin_addr.s_addr = INADDR_ANY;
5813 	} else {
5814 		ASSERT(connp->conn_family == AF_INET6);
5815 		len = sizeof (sin6_t);
5816 		sin6 = (sin6_t *)&sin6addr;
5817 		*sin6 = sin6_null;
5818 		sin6->sin6_family = AF_INET6;
5819 		V6_SET_ZERO(sin6->sin6_addr);
5820 	}
5821 
5822 	error = udp_do_bind(connp, (struct sockaddr *)&sin6addr, len,
5823 	    cr, B_FALSE);
5824 	return ((error < 0) ? proto_tlitosyserr(-error) : error);
5825 }
5826 
5827 /*
5828  * This routine removes a port number association from a stream. It
5829  * is called by udp_unbind and udp_tpi_unbind.
5830  */
5831 static int
5832 udp_do_unbind(conn_t *connp)
5833 {
5834 	udp_t 		*udp = connp->conn_udp;
5835 	udp_fanout_t	*udpf;
5836 	udp_stack_t	*us = udp->udp_us;
5837 
5838 	if (cl_inet_unbind != NULL) {
5839 		/*
5840 		 * Running in cluster mode - register unbind information
5841 		 */
5842 		if (connp->conn_ipversion == IPV4_VERSION) {
5843 			(*cl_inet_unbind)(
5844 			    connp->conn_netstack->netstack_stackid,
5845 			    IPPROTO_UDP, AF_INET,
5846 			    (uint8_t *)(&V4_PART_OF_V6(connp->conn_laddr_v6)),
5847 			    (in_port_t)connp->conn_lport, NULL);
5848 		} else {
5849 			(*cl_inet_unbind)(
5850 			    connp->conn_netstack->netstack_stackid,
5851 			    IPPROTO_UDP, AF_INET6,
5852 			    (uint8_t *)&(connp->conn_laddr_v6),
5853 			    (in_port_t)connp->conn_lport, NULL);
5854 		}
5855 	}
5856 
5857 	mutex_enter(&connp->conn_lock);
5858 	/* If a bind has not been done, we can't unbind. */
5859 	if (udp->udp_state == TS_UNBND) {
5860 		mutex_exit(&connp->conn_lock);
5861 		return (-TOUTSTATE);
5862 	}
5863 	udpf = &us->us_bind_fanout[UDP_BIND_HASH(connp->conn_lport,
5864 	    us->us_bind_fanout_size)];
5865 	mutex_enter(&udpf->uf_lock);
5866 	udp_bind_hash_remove(udp, B_TRUE);
5867 	connp->conn_saddr_v6 = ipv6_all_zeros;
5868 	connp->conn_bound_addr_v6 = ipv6_all_zeros;
5869 	connp->conn_laddr_v6 = ipv6_all_zeros;
5870 	connp->conn_mcbc_bind = B_FALSE;
5871 	connp->conn_lport = 0;
5872 	/* In case we were also connected */
5873 	connp->conn_faddr_v6 = ipv6_all_zeros;
5874 	connp->conn_fport = 0;
5875 	mutex_exit(&udpf->uf_lock);
5876 
5877 	connp->conn_v6lastdst = ipv6_all_zeros;
5878 	udp->udp_state = TS_UNBND;
5879 
5880 	(void) udp_build_hdr_template(connp, &connp->conn_saddr_v6,
5881 	    &connp->conn_faddr_v6, connp->conn_fport, connp->conn_flowinfo);
5882 	mutex_exit(&connp->conn_lock);
5883 
5884 	ip_unbind(connp);
5885 
5886 	return (0);
5887 }
5888 
5889 /*
5890  * It associates a default destination address with the stream.
5891  */
5892 static int
5893 udp_do_connect(conn_t *connp, const struct sockaddr *sa, socklen_t len,
5894     cred_t *cr, pid_t pid)
5895 {
5896 	sin6_t		*sin6;
5897 	sin_t		*sin;
5898 	in6_addr_t 	v6dst;
5899 	ipaddr_t 	v4dst;
5900 	uint16_t 	dstport;
5901 	uint32_t 	flowinfo;
5902 	udp_fanout_t	*udpf;
5903 	udp_t		*udp, *udp1;
5904 	ushort_t	ipversion;
5905 	udp_stack_t	*us;
5906 	int		error;
5907 	conn_t		*connp1;
5908 	ip_xmit_attr_t	*ixa;
5909 	ip_xmit_attr_t	*oldixa;
5910 	uint_t		scopeid = 0;
5911 	uint_t		srcid = 0;
5912 	in6_addr_t	v6src = connp->conn_saddr_v6;
5913 
5914 	udp = connp->conn_udp;
5915 	us = udp->udp_us;
5916 
5917 	/*
5918 	 * Address has been verified by the caller
5919 	 */
5920 	switch (len) {
5921 	default:
5922 		/*
5923 		 * Should never happen
5924 		 */
5925 		return (EINVAL);
5926 
5927 	case sizeof (sin_t):
5928 		sin = (sin_t *)sa;
5929 		v4dst = sin->sin_addr.s_addr;
5930 		dstport = sin->sin_port;
5931 		IN6_IPADDR_TO_V4MAPPED(v4dst, &v6dst);
5932 		ASSERT(connp->conn_ipversion == IPV4_VERSION);
5933 		ipversion = IPV4_VERSION;
5934 		break;
5935 
5936 	case sizeof (sin6_t):
5937 		sin6 = (sin6_t *)sa;
5938 		v6dst = sin6->sin6_addr;
5939 		dstport = sin6->sin6_port;
5940 		srcid = sin6->__sin6_src_id;
5941 		if (srcid != 0 && IN6_IS_ADDR_UNSPECIFIED(&v6src)) {
5942 			ip_srcid_find_id(srcid, &v6src, IPCL_ZONEID(connp),
5943 			    connp->conn_netstack);
5944 		}
5945 		if (IN6_IS_ADDR_V4MAPPED(&v6dst)) {
5946 			if (connp->conn_ipv6_v6only)
5947 				return (EADDRNOTAVAIL);
5948 
5949 			/*
5950 			 * Destination adress is mapped IPv6 address.
5951 			 * Source bound address should be unspecified or
5952 			 * IPv6 mapped address as well.
5953 			 */
5954 			if (!IN6_IS_ADDR_UNSPECIFIED(
5955 			    &connp->conn_bound_addr_v6) &&
5956 			    !IN6_IS_ADDR_V4MAPPED(&connp->conn_bound_addr_v6)) {
5957 				return (EADDRNOTAVAIL);
5958 			}
5959 			IN6_V4MAPPED_TO_IPADDR(&v6dst, v4dst);
5960 			ipversion = IPV4_VERSION;
5961 			flowinfo = 0;
5962 		} else {
5963 			ipversion = IPV6_VERSION;
5964 			flowinfo = sin6->sin6_flowinfo;
5965 			if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr))
5966 				scopeid = sin6->sin6_scope_id;
5967 		}
5968 		break;
5969 	}
5970 
5971 	if (dstport == 0)
5972 		return (-TBADADDR);
5973 
5974 	/*
5975 	 * If there is a different thread using conn_ixa then we get a new
5976 	 * copy and cut the old one loose from conn_ixa. Otherwise we use
5977 	 * conn_ixa and prevent any other thread from using/changing it.
5978 	 * Once connect() is done other threads can use conn_ixa since the
5979 	 * refcnt will be back at one.
5980 	 * We defer updating conn_ixa until later to handle any concurrent
5981 	 * conn_ixa_cleanup thread.
5982 	 */
5983 	ixa = conn_get_ixa(connp, B_FALSE);
5984 	if (ixa == NULL)
5985 		return (ENOMEM);
5986 
5987 	ASSERT(ixa->ixa_refcnt >= 2);
5988 	ASSERT(ixa == connp->conn_ixa);
5989 
5990 	mutex_enter(&connp->conn_lock);
5991 	/*
5992 	 * This udp_t must have bound to a port already before doing a connect.
5993 	 * Reject if a connect is in progress (we drop conn_lock during
5994 	 * udp_do_connect).
5995 	 */
5996 	if (udp->udp_state == TS_UNBND || udp->udp_state == TS_WCON_CREQ) {
5997 		mutex_exit(&connp->conn_lock);
5998 		(void) strlog(UDP_MOD_ID, 0, 1, SL_ERROR|SL_TRACE,
5999 		    "udp_connect: bad state, %u", udp->udp_state);
6000 		ixa_refrele(ixa);
6001 		return (-TOUTSTATE);
6002 	}
6003 	ASSERT(connp->conn_lport != 0 && udp->udp_ptpbhn != NULL);
6004 
6005 	udpf = &us->us_bind_fanout[UDP_BIND_HASH(connp->conn_lport,
6006 	    us->us_bind_fanout_size)];
6007 
6008 	mutex_enter(&udpf->uf_lock);
6009 	if (udp->udp_state == TS_DATA_XFER) {
6010 		/* Already connected - clear out state */
6011 		if (connp->conn_mcbc_bind)
6012 			connp->conn_saddr_v6 = ipv6_all_zeros;
6013 		else
6014 			connp->conn_saddr_v6 = connp->conn_bound_addr_v6;
6015 		connp->conn_laddr_v6 = connp->conn_bound_addr_v6;
6016 		connp->conn_faddr_v6 = ipv6_all_zeros;
6017 		connp->conn_fport = 0;
6018 		udp->udp_state = TS_IDLE;
6019 	}
6020 
6021 	connp->conn_fport = dstport;
6022 	connp->conn_ipversion = ipversion;
6023 	if (ipversion == IPV4_VERSION) {
6024 		/*
6025 		 * Interpret a zero destination to mean loopback.
6026 		 * Update the T_CONN_REQ (sin/sin6) since it is used to
6027 		 * generate the T_CONN_CON.
6028 		 */
6029 		if (v4dst == INADDR_ANY) {
6030 			v4dst = htonl(INADDR_LOOPBACK);
6031 			IN6_IPADDR_TO_V4MAPPED(v4dst, &v6dst);
6032 			if (connp->conn_family == AF_INET) {
6033 				sin->sin_addr.s_addr = v4dst;
6034 			} else {
6035 				sin6->sin6_addr = v6dst;
6036 			}
6037 		}
6038 		connp->conn_faddr_v6 = v6dst;
6039 		connp->conn_flowinfo = 0;
6040 	} else {
6041 		ASSERT(connp->conn_ipversion == IPV6_VERSION);
6042 		/*
6043 		 * Interpret a zero destination to mean loopback.
6044 		 * Update the T_CONN_REQ (sin/sin6) since it is used to
6045 		 * generate the T_CONN_CON.
6046 		 */
6047 		if (IN6_IS_ADDR_UNSPECIFIED(&v6dst)) {
6048 			v6dst = ipv6_loopback;
6049 			sin6->sin6_addr = v6dst;
6050 		}
6051 		connp->conn_faddr_v6 = v6dst;
6052 		connp->conn_flowinfo = flowinfo;
6053 	}
6054 	mutex_exit(&udpf->uf_lock);
6055 
6056 	/*
6057 	 * We update our cred/cpid based on the caller of connect
6058 	 */
6059 	if (connp->conn_cred != cr) {
6060 		crhold(cr);
6061 		crfree(connp->conn_cred);
6062 		connp->conn_cred = cr;
6063 	}
6064 	connp->conn_cpid = pid;
6065 	ASSERT(!(ixa->ixa_free_flags & IXA_FREE_CRED));
6066 	ixa->ixa_cred = cr;
6067 	ixa->ixa_cpid = pid;
6068 	if (is_system_labeled()) {
6069 		/* We need to restart with a label based on the cred */
6070 		ip_xmit_attr_restore_tsl(ixa, ixa->ixa_cred);
6071 	}
6072 
6073 	if (scopeid != 0) {
6074 		ixa->ixa_flags |= IXAF_SCOPEID_SET;
6075 		ixa->ixa_scopeid = scopeid;
6076 		connp->conn_incoming_ifindex = scopeid;
6077 	} else {
6078 		ixa->ixa_flags &= ~IXAF_SCOPEID_SET;
6079 		connp->conn_incoming_ifindex = connp->conn_bound_if;
6080 	}
6081 	/*
6082 	 * conn_connect will drop conn_lock and reacquire it.
6083 	 * To prevent a send* from messing with this udp_t while the lock
6084 	 * is dropped we set udp_state and clear conn_v6lastdst.
6085 	 * That will make all send* fail with EISCONN.
6086 	 */
6087 	connp->conn_v6lastdst = ipv6_all_zeros;
6088 	udp->udp_state = TS_WCON_CREQ;
6089 
6090 	error = conn_connect(connp, NULL, IPDF_ALLOW_MCBC);
6091 	mutex_exit(&connp->conn_lock);
6092 	if (error != 0)
6093 		goto connect_failed;
6094 
6095 	/*
6096 	 * The addresses have been verified. Time to insert in
6097 	 * the correct fanout list.
6098 	 */
6099 	error = ipcl_conn_insert(connp);
6100 	if (error != 0)
6101 		goto connect_failed;
6102 
6103 	mutex_enter(&connp->conn_lock);
6104 	error = udp_build_hdr_template(connp, &connp->conn_saddr_v6,
6105 	    &connp->conn_faddr_v6, connp->conn_fport, connp->conn_flowinfo);
6106 	if (error != 0) {
6107 		mutex_exit(&connp->conn_lock);
6108 		goto connect_failed;
6109 	}
6110 
6111 	udp->udp_state = TS_DATA_XFER;
6112 	/* Record this as the "last" send even though we haven't sent any */
6113 	connp->conn_v6lastdst = connp->conn_faddr_v6;
6114 	connp->conn_lastipversion = connp->conn_ipversion;
6115 	connp->conn_lastdstport = connp->conn_fport;
6116 	connp->conn_lastflowinfo = connp->conn_flowinfo;
6117 	connp->conn_lastscopeid = scopeid;
6118 	connp->conn_lastsrcid = srcid;
6119 	/* Also remember a source to use together with lastdst */
6120 	connp->conn_v6lastsrc = v6src;
6121 
6122 	oldixa = conn_replace_ixa(connp, ixa);
6123 	mutex_exit(&connp->conn_lock);
6124 	ixa_refrele(oldixa);
6125 
6126 	/*
6127 	 * We've picked a source address above. Now we can
6128 	 * verify that the src/port/dst/port is unique for all
6129 	 * connections in TS_DATA_XFER, skipping ourselves.
6130 	 */
6131 	mutex_enter(&udpf->uf_lock);
6132 	for (udp1 = udpf->uf_udp; udp1 != NULL; udp1 = udp1->udp_bind_hash) {
6133 		if (udp1->udp_state != TS_DATA_XFER)
6134 			continue;
6135 
6136 		if (udp1 == udp)
6137 			continue;
6138 
6139 		connp1 = udp1->udp_connp;
6140 		if (connp->conn_lport != connp1->conn_lport ||
6141 		    connp->conn_ipversion != connp1->conn_ipversion ||
6142 		    dstport != connp1->conn_fport ||
6143 		    !IN6_ARE_ADDR_EQUAL(&connp->conn_laddr_v6,
6144 		    &connp1->conn_laddr_v6) ||
6145 		    !IN6_ARE_ADDR_EQUAL(&v6dst, &connp1->conn_faddr_v6) ||
6146 		    !(IPCL_ZONE_MATCH(connp, connp1->conn_zoneid) ||
6147 		    IPCL_ZONE_MATCH(connp1, connp->conn_zoneid)))
6148 			continue;
6149 		mutex_exit(&udpf->uf_lock);
6150 		error = -TBADADDR;
6151 		goto connect_failed;
6152 	}
6153 	if (cl_inet_connect2 != NULL) {
6154 		CL_INET_UDP_CONNECT(connp, B_TRUE, &v6dst, dstport, error);
6155 		if (error != 0) {
6156 			mutex_exit(&udpf->uf_lock);
6157 			error = -TBADADDR;
6158 			goto connect_failed;
6159 		}
6160 	}
6161 	mutex_exit(&udpf->uf_lock);
6162 
6163 	ixa_refrele(ixa);
6164 	return (0);
6165 
6166 connect_failed:
6167 	if (ixa != NULL)
6168 		ixa_refrele(ixa);
6169 	mutex_enter(&connp->conn_lock);
6170 	mutex_enter(&udpf->uf_lock);
6171 	udp->udp_state = TS_IDLE;
6172 	connp->conn_faddr_v6 = ipv6_all_zeros;
6173 	connp->conn_fport = 0;
6174 	/* In case the source address was set above */
6175 	if (connp->conn_mcbc_bind)
6176 		connp->conn_saddr_v6 = ipv6_all_zeros;
6177 	else
6178 		connp->conn_saddr_v6 = connp->conn_bound_addr_v6;
6179 	connp->conn_laddr_v6 = connp->conn_bound_addr_v6;
6180 	mutex_exit(&udpf->uf_lock);
6181 
6182 	connp->conn_v6lastdst = ipv6_all_zeros;
6183 	connp->conn_flowinfo = 0;
6184 
6185 	(void) udp_build_hdr_template(connp, &connp->conn_saddr_v6,
6186 	    &connp->conn_faddr_v6, connp->conn_fport, connp->conn_flowinfo);
6187 	mutex_exit(&connp->conn_lock);
6188 	return (error);
6189 }
6190 
6191 static int
6192 udp_connect(sock_lower_handle_t proto_handle, const struct sockaddr *sa,
6193     socklen_t len, sock_connid_t *id, cred_t *cr)
6194 {
6195 	conn_t	*connp = (conn_t *)proto_handle;
6196 	udp_t	*udp = connp->conn_udp;
6197 	int	error;
6198 	boolean_t did_bind = B_FALSE;
6199 	pid_t	pid = curproc->p_pid;
6200 
6201 	/* All Solaris components should pass a cred for this operation. */
6202 	ASSERT(cr != NULL);
6203 
6204 	if (sa == NULL) {
6205 		/*
6206 		 * Disconnect
6207 		 * Make sure we are connected
6208 		 */
6209 		if (udp->udp_state != TS_DATA_XFER)
6210 			return (EINVAL);
6211 
6212 		error = udp_disconnect(connp);
6213 		return (error);
6214 	}
6215 
6216 	error = proto_verify_ip_addr(connp->conn_family, sa, len);
6217 	if (error != 0)
6218 		goto done;
6219 
6220 	/* do an implicit bind if necessary */
6221 	if (udp->udp_state == TS_UNBND) {
6222 		error = udp_implicit_bind(connp, cr);
6223 		/*
6224 		 * We could be racing with an actual bind, in which case
6225 		 * we would see EPROTO. We cross our fingers and try
6226 		 * to connect.
6227 		 */
6228 		if (!(error == 0 || error == EPROTO))
6229 			goto done;
6230 		did_bind = B_TRUE;
6231 	}
6232 	/*
6233 	 * set SO_DGRAM_ERRIND
6234 	 */
6235 	connp->conn_dgram_errind = B_TRUE;
6236 
6237 	error = udp_do_connect(connp, sa, len, cr, pid);
6238 
6239 	if (error != 0 && did_bind) {
6240 		int unbind_err;
6241 
6242 		unbind_err = udp_do_unbind(connp);
6243 		ASSERT(unbind_err == 0);
6244 	}
6245 
6246 	if (error == 0) {
6247 		*id = 0;
6248 		(*connp->conn_upcalls->su_connected)
6249 		    (connp->conn_upper_handle, 0, NULL, -1);
6250 	} else if (error < 0) {
6251 		error = proto_tlitosyserr(-error);
6252 	}
6253 
6254 done:
6255 	if (error != 0 && udp->udp_state == TS_DATA_XFER) {
6256 		/*
6257 		 * No need to hold locks to set state
6258 		 * after connect failure socket state is undefined
6259 		 * We set the state only to imitate old sockfs behavior
6260 		 */
6261 		udp->udp_state = TS_IDLE;
6262 	}
6263 	return (error);
6264 }
6265 
6266 int
6267 udp_send(sock_lower_handle_t proto_handle, mblk_t *mp, struct nmsghdr *msg,
6268     cred_t *cr)
6269 {
6270 	sin6_t		*sin6;
6271 	sin_t		*sin = NULL;
6272 	uint_t		srcid;
6273 	conn_t		*connp = (conn_t *)proto_handle;
6274 	udp_t		*udp = connp->conn_udp;
6275 	int		error = 0;
6276 	udp_stack_t	*us = udp->udp_us;
6277 	ushort_t	ipversion;
6278 	pid_t		pid = curproc->p_pid;
6279 	ip_xmit_attr_t	*ixa;
6280 
6281 	ASSERT(DB_TYPE(mp) == M_DATA);
6282 
6283 	/* All Solaris components should pass a cred for this operation. */
6284 	ASSERT(cr != NULL);
6285 
6286 	/* do an implicit bind if necessary */
6287 	if (udp->udp_state == TS_UNBND) {
6288 		error = udp_implicit_bind(connp, cr);
6289 		/*
6290 		 * We could be racing with an actual bind, in which case
6291 		 * we would see EPROTO. We cross our fingers and try
6292 		 * to connect.
6293 		 */
6294 		if (!(error == 0 || error == EPROTO)) {
6295 			freemsg(mp);
6296 			return (error);
6297 		}
6298 	}
6299 
6300 	/* Connected? */
6301 	if (msg->msg_name == NULL) {
6302 		if (udp->udp_state != TS_DATA_XFER) {
6303 			BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6304 			return (EDESTADDRREQ);
6305 		}
6306 		if (msg->msg_controllen != 0) {
6307 			error = udp_output_ancillary(connp, NULL, NULL, mp,
6308 			    NULL, msg, cr, pid);
6309 		} else {
6310 			error = udp_output_connected(connp, mp, cr, pid);
6311 		}
6312 		if (us->us_sendto_ignerr)
6313 			return (0);
6314 		else
6315 			return (error);
6316 	}
6317 	if (udp->udp_state == TS_DATA_XFER) {
6318 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6319 		return (EISCONN);
6320 	}
6321 	error = proto_verify_ip_addr(connp->conn_family,
6322 	    (struct sockaddr *)msg->msg_name, msg->msg_namelen);
6323 	if (error != 0) {
6324 		BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6325 		return (error);
6326 	}
6327 	switch (connp->conn_family) {
6328 	case AF_INET6:
6329 		sin6 = (sin6_t *)msg->msg_name;
6330 
6331 		srcid = sin6->__sin6_src_id;
6332 
6333 		if (!IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
6334 			/*
6335 			 * Destination is a non-IPv4-compatible IPv6 address.
6336 			 * Send out an IPv6 format packet.
6337 			 */
6338 
6339 			/*
6340 			 * If the local address is a mapped address return
6341 			 * an error.
6342 			 * It would be possible to send an IPv6 packet but the
6343 			 * response would never make it back to the application
6344 			 * since it is bound to a mapped address.
6345 			 */
6346 			if (IN6_IS_ADDR_V4MAPPED(&connp->conn_saddr_v6)) {
6347 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6348 				return (EADDRNOTAVAIL);
6349 			}
6350 			if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
6351 				sin6->sin6_addr = ipv6_loopback;
6352 			ipversion = IPV6_VERSION;
6353 		} else {
6354 			if (connp->conn_ipv6_v6only) {
6355 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6356 				return (EADDRNOTAVAIL);
6357 			}
6358 
6359 			/*
6360 			 * If the local address is not zero or a mapped address
6361 			 * return an error.  It would be possible to send an
6362 			 * IPv4 packet but the response would never make it
6363 			 * back to the application since it is bound to a
6364 			 * non-mapped address.
6365 			 */
6366 			if (!IN6_IS_ADDR_V4MAPPED(&connp->conn_saddr_v6) &&
6367 			    !IN6_IS_ADDR_UNSPECIFIED(&connp->conn_saddr_v6)) {
6368 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6369 				return (EADDRNOTAVAIL);
6370 			}
6371 
6372 			if (V4_PART_OF_V6(sin6->sin6_addr) == INADDR_ANY) {
6373 				V4_PART_OF_V6(sin6->sin6_addr) =
6374 				    htonl(INADDR_LOOPBACK);
6375 			}
6376 			ipversion = IPV4_VERSION;
6377 		}
6378 
6379 		/*
6380 		 * We have to allocate an ip_xmit_attr_t before we grab
6381 		 * conn_lock and we need to hold conn_lock once we've check
6382 		 * conn_same_as_last_v6 to handle concurrent send* calls on a
6383 		 * socket.
6384 		 */
6385 		if (msg->msg_controllen == 0) {
6386 			ixa = conn_get_ixa(connp, B_FALSE);
6387 			if (ixa == NULL) {
6388 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6389 				return (ENOMEM);
6390 			}
6391 		} else {
6392 			ixa = NULL;
6393 		}
6394 		mutex_enter(&connp->conn_lock);
6395 		if (udp->udp_delayed_error != 0) {
6396 			sin6_t  *sin2 = (sin6_t *)&udp->udp_delayed_addr;
6397 
6398 			error = udp->udp_delayed_error;
6399 			udp->udp_delayed_error = 0;
6400 
6401 			/* Compare IP address, port, and family */
6402 
6403 			if (sin6->sin6_port == sin2->sin6_port &&
6404 			    IN6_ARE_ADDR_EQUAL(&sin6->sin6_addr,
6405 			    &sin2->sin6_addr) &&
6406 			    sin6->sin6_family == sin2->sin6_family) {
6407 				mutex_exit(&connp->conn_lock);
6408 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6409 				if (ixa != NULL)
6410 					ixa_refrele(ixa);
6411 				return (error);
6412 			}
6413 		}
6414 
6415 		if (msg->msg_controllen != 0) {
6416 			mutex_exit(&connp->conn_lock);
6417 			ASSERT(ixa == NULL);
6418 			error = udp_output_ancillary(connp, NULL, sin6, mp,
6419 			    NULL, msg, cr, pid);
6420 		} else if (conn_same_as_last_v6(connp, sin6) &&
6421 		    connp->conn_lastsrcid == srcid &&
6422 		    ipsec_outbound_policy_current(ixa)) {
6423 			/* udp_output_lastdst drops conn_lock */
6424 			error = udp_output_lastdst(connp, mp, cr, pid, ixa);
6425 		} else {
6426 			/* udp_output_newdst drops conn_lock */
6427 			error = udp_output_newdst(connp, mp, NULL, sin6,
6428 			    ipversion, cr, pid, ixa);
6429 		}
6430 		ASSERT(MUTEX_NOT_HELD(&connp->conn_lock));
6431 		if (us->us_sendto_ignerr)
6432 			return (0);
6433 		else
6434 			return (error);
6435 	case AF_INET:
6436 		sin = (sin_t *)msg->msg_name;
6437 
6438 		ipversion = IPV4_VERSION;
6439 
6440 		if (sin->sin_addr.s_addr == INADDR_ANY)
6441 			sin->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
6442 
6443 		/*
6444 		 * We have to allocate an ip_xmit_attr_t before we grab
6445 		 * conn_lock and we need to hold conn_lock once we've check
6446 		 * conn_same_as_last_v6 to handle concurrent send* on a socket.
6447 		 */
6448 		if (msg->msg_controllen == 0) {
6449 			ixa = conn_get_ixa(connp, B_FALSE);
6450 			if (ixa == NULL) {
6451 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6452 				return (ENOMEM);
6453 			}
6454 		} else {
6455 			ixa = NULL;
6456 		}
6457 		mutex_enter(&connp->conn_lock);
6458 		if (udp->udp_delayed_error != 0) {
6459 			sin_t  *sin2 = (sin_t *)&udp->udp_delayed_addr;
6460 
6461 			error = udp->udp_delayed_error;
6462 			udp->udp_delayed_error = 0;
6463 
6464 			/* Compare IP address and port */
6465 
6466 			if (sin->sin_port == sin2->sin_port &&
6467 			    sin->sin_addr.s_addr == sin2->sin_addr.s_addr) {
6468 				mutex_exit(&connp->conn_lock);
6469 				BUMP_MIB(&us->us_udp_mib, udpOutErrors);
6470 				if (ixa != NULL)
6471 					ixa_refrele(ixa);
6472 				return (error);
6473 			}
6474 		}
6475 		if (msg->msg_controllen != 0) {
6476 			mutex_exit(&connp->conn_lock);
6477 			ASSERT(ixa == NULL);
6478 			error = udp_output_ancillary(connp, sin, NULL, mp,
6479 			    NULL, msg, cr, pid);
6480 		} else if (conn_same_as_last_v4(connp, sin) &&
6481 		    ipsec_outbound_policy_current(ixa)) {
6482 			/* udp_output_lastdst drops conn_lock */
6483 			error = udp_output_lastdst(connp, mp, cr, pid, ixa);
6484 		} else {
6485 			/* udp_output_newdst drops conn_lock */
6486 			error = udp_output_newdst(connp, mp, sin, NULL,
6487 			    ipversion, cr, pid, ixa);
6488 		}
6489 		ASSERT(MUTEX_NOT_HELD(&connp->conn_lock));
6490 		if (us->us_sendto_ignerr)
6491 			return (0);
6492 		else
6493 			return (error);
6494 	default:
6495 		return (EINVAL);
6496 	}
6497 }
6498 
6499 int
6500 udp_fallback(sock_lower_handle_t proto_handle, queue_t *q,
6501     boolean_t issocket, so_proto_quiesced_cb_t quiesced_cb,
6502     sock_quiesce_arg_t *arg)
6503 {
6504 	conn_t 	*connp = (conn_t *)proto_handle;
6505 	udp_t	*udp;
6506 	struct T_capability_ack tca;
6507 	struct sockaddr_in6 laddr, faddr;
6508 	socklen_t laddrlen, faddrlen;
6509 	short opts;
6510 	struct stroptions *stropt;
6511 	mblk_t *mp, *stropt_mp;
6512 	int error;
6513 
6514 	udp = connp->conn_udp;
6515 
6516 	stropt_mp = allocb_wait(sizeof (*stropt), BPRI_HI, STR_NOSIG, NULL);
6517 
6518 	/*
6519 	 * setup the fallback stream that was allocated
6520 	 */
6521 	connp->conn_dev = (dev_t)RD(q)->q_ptr;
6522 	connp->conn_minor_arena = WR(q)->q_ptr;
6523 
6524 	RD(q)->q_ptr = WR(q)->q_ptr = connp;
6525 
6526 	WR(q)->q_qinfo = &udp_winit;
6527 
6528 	connp->conn_rq = RD(q);
6529 	connp->conn_wq = WR(q);
6530 
6531 	/* Notify stream head about options before sending up data */
6532 	stropt_mp->b_datap->db_type = M_SETOPTS;
6533 	stropt_mp->b_wptr += sizeof (*stropt);
6534 	stropt = (struct stroptions *)stropt_mp->b_rptr;
6535 	stropt->so_flags = SO_WROFF | SO_HIWAT;
6536 	stropt->so_wroff = connp->conn_wroff;
6537 	stropt->so_hiwat = udp->udp_rcv_disply_hiwat;
6538 	putnext(RD(q), stropt_mp);
6539 
6540 	/*
6541 	 * Free the helper stream
6542 	 */
6543 	ip_free_helper_stream(connp);
6544 
6545 	if (!issocket)
6546 		udp_use_pure_tpi(udp);
6547 
6548 	/*
6549 	 * Collect the information needed to sync with the sonode
6550 	 */
6551 	udp_do_capability_ack(udp, &tca, TC1_INFO);
6552 
6553 	laddrlen = faddrlen = sizeof (sin6_t);
6554 	(void) udp_getsockname((sock_lower_handle_t)connp,
6555 	    (struct sockaddr *)&laddr, &laddrlen, CRED());
6556 	error = udp_getpeername((sock_lower_handle_t)connp,
6557 	    (struct sockaddr *)&faddr, &faddrlen, CRED());
6558 	if (error != 0)
6559 		faddrlen = 0;
6560 
6561 	opts = 0;
6562 	if (connp->conn_dgram_errind)
6563 		opts |= SO_DGRAM_ERRIND;
6564 	if (connp->conn_ixa->ixa_flags & IXAF_DONTROUTE)
6565 		opts |= SO_DONTROUTE;
6566 
6567 	mp = (*quiesced_cb)(connp->conn_upper_handle, arg, &tca,
6568 	    (struct sockaddr *)&laddr, laddrlen,
6569 	    (struct sockaddr *)&faddr, faddrlen, opts);
6570 
6571 	mutex_enter(&udp->udp_recv_lock);
6572 	/*
6573 	 * Attempts to send data up during fallback will result in it being
6574 	 * queued in udp_t. First push up the datagrams obtained from the
6575 	 * socket, then any packets queued in udp_t.
6576 	 */
6577 	if (mp != NULL) {
6578 		mp->b_next = udp->udp_fallback_queue_head;
6579 		udp->udp_fallback_queue_head = mp;
6580 	}
6581 	while (udp->udp_fallback_queue_head != NULL) {
6582 		mp = udp->udp_fallback_queue_head;
6583 		udp->udp_fallback_queue_head = mp->b_next;
6584 		mutex_exit(&udp->udp_recv_lock);
6585 		mp->b_next = NULL;
6586 		putnext(RD(q), mp);
6587 		mutex_enter(&udp->udp_recv_lock);
6588 	}
6589 	udp->udp_fallback_queue_tail = udp->udp_fallback_queue_head;
6590 	/*
6591 	 * No longer a streams less socket
6592 	 */
6593 	mutex_enter(&connp->conn_lock);
6594 	connp->conn_flags &= ~IPCL_NONSTR;
6595 	mutex_exit(&connp->conn_lock);
6596 
6597 	mutex_exit(&udp->udp_recv_lock);
6598 
6599 	ASSERT(connp->conn_ref >= 1);
6600 
6601 	return (0);
6602 }
6603 
6604 /* ARGSUSED3 */
6605 int
6606 udp_getpeername(sock_lower_handle_t proto_handle, struct sockaddr *sa,
6607     socklen_t *salenp, cred_t *cr)
6608 {
6609 	conn_t	*connp = (conn_t *)proto_handle;
6610 	udp_t	*udp = connp->conn_udp;
6611 	int error;
6612 
6613 	/* All Solaris components should pass a cred for this operation. */
6614 	ASSERT(cr != NULL);
6615 
6616 	mutex_enter(&connp->conn_lock);
6617 	if (udp->udp_state != TS_DATA_XFER)
6618 		error = ENOTCONN;
6619 	else
6620 		error = conn_getpeername(connp, sa, salenp);
6621 	mutex_exit(&connp->conn_lock);
6622 	return (error);
6623 }
6624 
6625 /* ARGSUSED3 */
6626 int
6627 udp_getsockname(sock_lower_handle_t proto_handle, struct sockaddr *sa,
6628     socklen_t *salenp, cred_t *cr)
6629 {
6630 	conn_t	*connp = (conn_t *)proto_handle;
6631 	int error;
6632 
6633 	/* All Solaris components should pass a cred for this operation. */
6634 	ASSERT(cr != NULL);
6635 
6636 	mutex_enter(&connp->conn_lock);
6637 	error = conn_getsockname(connp, sa, salenp);
6638 	mutex_exit(&connp->conn_lock);
6639 	return (error);
6640 }
6641 
6642 int
6643 udp_getsockopt(sock_lower_handle_t proto_handle, int level, int option_name,
6644     void *optvalp, socklen_t *optlen, cred_t *cr)
6645 {
6646 	conn_t		*connp = (conn_t *)proto_handle;
6647 	int		error;
6648 	t_uscalar_t	max_optbuf_len;
6649 	void		*optvalp_buf;
6650 	int		len;
6651 
6652 	/* All Solaris components should pass a cred for this operation. */
6653 	ASSERT(cr != NULL);
6654 
6655 	error = proto_opt_check(level, option_name, *optlen, &max_optbuf_len,
6656 	    udp_opt_obj.odb_opt_des_arr,
6657 	    udp_opt_obj.odb_opt_arr_cnt,
6658 	    B_FALSE, B_TRUE, cr);
6659 	if (error != 0) {
6660 		if (error < 0)
6661 			error = proto_tlitosyserr(-error);
6662 		return (error);
6663 	}
6664 
6665 	optvalp_buf = kmem_alloc(max_optbuf_len, KM_SLEEP);
6666 	len = udp_opt_get(connp, level, option_name, optvalp_buf);
6667 	if (len == -1) {
6668 		kmem_free(optvalp_buf, max_optbuf_len);
6669 		return (EINVAL);
6670 	}
6671 
6672 	/*
6673 	 * update optlen and copy option value
6674 	 */
6675 	t_uscalar_t size = MIN(len, *optlen);
6676 
6677 	bcopy(optvalp_buf, optvalp, size);
6678 	bcopy(&size, optlen, sizeof (size));
6679 
6680 	kmem_free(optvalp_buf, max_optbuf_len);
6681 	return (0);
6682 }
6683 
6684 int
6685 udp_setsockopt(sock_lower_handle_t proto_handle, int level, int option_name,
6686     const void *optvalp, socklen_t optlen, cred_t *cr)
6687 {
6688 	conn_t		*connp = (conn_t *)proto_handle;
6689 	int		error;
6690 
6691 	/* All Solaris components should pass a cred for this operation. */
6692 	ASSERT(cr != NULL);
6693 
6694 	error = proto_opt_check(level, option_name, optlen, NULL,
6695 	    udp_opt_obj.odb_opt_des_arr,
6696 	    udp_opt_obj.odb_opt_arr_cnt,
6697 	    B_TRUE, B_FALSE, cr);
6698 
6699 	if (error != 0) {
6700 		if (error < 0)
6701 			error = proto_tlitosyserr(-error);
6702 		return (error);
6703 	}
6704 
6705 	error = udp_opt_set(connp, SETFN_OPTCOM_NEGOTIATE, level, option_name,
6706 	    optlen, (uchar_t *)optvalp, (uint_t *)&optlen, (uchar_t *)optvalp,
6707 	    NULL, cr);
6708 
6709 	ASSERT(error >= 0);
6710 
6711 	return (error);
6712 }
6713 
6714 void
6715 udp_clr_flowctrl(sock_lower_handle_t proto_handle)
6716 {
6717 	conn_t	*connp = (conn_t *)proto_handle;
6718 	udp_t	*udp = connp->conn_udp;
6719 
6720 	mutex_enter(&udp->udp_recv_lock);
6721 	connp->conn_flow_cntrld = B_FALSE;
6722 	mutex_exit(&udp->udp_recv_lock);
6723 }
6724 
6725 /* ARGSUSED2 */
6726 int
6727 udp_shutdown(sock_lower_handle_t proto_handle, int how, cred_t *cr)
6728 {
6729 	conn_t	*connp = (conn_t *)proto_handle;
6730 
6731 	/* All Solaris components should pass a cred for this operation. */
6732 	ASSERT(cr != NULL);
6733 
6734 	/* shut down the send side */
6735 	if (how != SHUT_RD)
6736 		(*connp->conn_upcalls->su_opctl)(connp->conn_upper_handle,
6737 		    SOCK_OPCTL_SHUT_SEND, 0);
6738 	/* shut down the recv side */
6739 	if (how != SHUT_WR)
6740 		(*connp->conn_upcalls->su_opctl)(connp->conn_upper_handle,
6741 		    SOCK_OPCTL_SHUT_RECV, 0);
6742 	return (0);
6743 }
6744 
6745 int
6746 udp_ioctl(sock_lower_handle_t proto_handle, int cmd, intptr_t arg,
6747     int mode, int32_t *rvalp, cred_t *cr)
6748 {
6749 	conn_t  	*connp = (conn_t *)proto_handle;
6750 	int		error;
6751 
6752 	/* All Solaris components should pass a cred for this operation. */
6753 	ASSERT(cr != NULL);
6754 
6755 	/*
6756 	 * If we don't have a helper stream then create one.
6757 	 * ip_create_helper_stream takes care of locking the conn_t,
6758 	 * so this check for NULL is just a performance optimization.
6759 	 */
6760 	if (connp->conn_helper_info == NULL) {
6761 		udp_stack_t *us = connp->conn_udp->udp_us;
6762 
6763 		ASSERT(us->us_ldi_ident != NULL);
6764 
6765 		/*
6766 		 * Create a helper stream for non-STREAMS socket.
6767 		 */
6768 		error = ip_create_helper_stream(connp, us->us_ldi_ident);
6769 		if (error != 0) {
6770 			ip0dbg(("tcp_ioctl: create of IP helper stream "
6771 			    "failed %d\n", error));
6772 			return (error);
6773 		}
6774 	}
6775 
6776 	switch (cmd) {
6777 		case _SIOCSOCKFALLBACK:
6778 		case TI_GETPEERNAME:
6779 		case TI_GETMYNAME:
6780 			ip1dbg(("udp_ioctl: cmd 0x%x on non streams socket",
6781 			    cmd));
6782 			error = EINVAL;
6783 			break;
6784 		default:
6785 			/*
6786 			 * Pass on to IP using helper stream
6787 			 */
6788 			error = ldi_ioctl(connp->conn_helper_info->iphs_handle,
6789 			    cmd, arg, mode, cr, rvalp);
6790 			break;
6791 	}
6792 	return (error);
6793 }
6794 
6795 /* ARGSUSED */
6796 int
6797 udp_accept(sock_lower_handle_t lproto_handle,
6798     sock_lower_handle_t eproto_handle, sock_upper_handle_t sock_handle,
6799     cred_t *cr)
6800 {
6801 	return (EOPNOTSUPP);
6802 }
6803 
6804 /* ARGSUSED */
6805 int
6806 udp_listen(sock_lower_handle_t proto_handle, int backlog, cred_t *cr)
6807 {
6808 	return (EOPNOTSUPP);
6809 }
6810 
6811 sock_downcalls_t sock_udp_downcalls = {
6812 	udp_activate,		/* sd_activate */
6813 	udp_accept,		/* sd_accept */
6814 	udp_bind,		/* sd_bind */
6815 	udp_listen,		/* sd_listen */
6816 	udp_connect,		/* sd_connect */
6817 	udp_getpeername,	/* sd_getpeername */
6818 	udp_getsockname,	/* sd_getsockname */
6819 	udp_getsockopt,		/* sd_getsockopt */
6820 	udp_setsockopt,		/* sd_setsockopt */
6821 	udp_send,		/* sd_send */
6822 	NULL,			/* sd_send_uio */
6823 	NULL,			/* sd_recv_uio */
6824 	NULL,			/* sd_poll */
6825 	udp_shutdown,		/* sd_shutdown */
6826 	udp_clr_flowctrl,	/* sd_setflowctrl */
6827 	udp_ioctl,		/* sd_ioctl */
6828 	udp_close		/* sd_close */
6829 };
6830