1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2007 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_ZIL_H 27 #define _SYS_ZIL_H 28 29 #pragma ident "%Z%%M% %I% %E% SMI" 30 31 #include <sys/types.h> 32 #include <sys/spa.h> 33 #include <sys/zio.h> 34 #include <sys/dmu.h> 35 36 #ifdef __cplusplus 37 extern "C" { 38 #endif 39 40 /* 41 * Intent log format: 42 * 43 * Each objset has its own intent log. The log header (zil_header_t) 44 * for objset N's intent log is kept in the Nth object of the SPA's 45 * intent_log objset. The log header points to a chain of log blocks, 46 * each of which contains log records (i.e., transactions) followed by 47 * a log block trailer (zil_trailer_t). The format of a log record 48 * depends on the record (or transaction) type, but all records begin 49 * with a common structure that defines the type, length, and txg. 50 */ 51 52 /* 53 * Intent log header - this on disk structure holds fields to manage 54 * the log. All fields are 64 bit to easily handle cross architectures. 55 */ 56 typedef struct zil_header { 57 uint64_t zh_claim_txg; /* txg in which log blocks were claimed */ 58 uint64_t zh_replay_seq; /* highest replayed sequence number */ 59 blkptr_t zh_log; /* log chain */ 60 uint64_t zh_claim_seq; /* highest claimed sequence number */ 61 uint64_t zh_pad[5]; 62 } zil_header_t; 63 64 /* 65 * Log block trailer - structure at the end of the header and each log block 66 * 67 * The zit_bt contains a zbt_cksum which for the intent log is 68 * the sequence number of this log block. A seq of 0 is invalid. 69 * The zbt_cksum is checked by the SPA against the sequence 70 * number passed in the blk_cksum field of the blkptr_t 71 */ 72 typedef struct zil_trailer { 73 uint64_t zit_pad; 74 blkptr_t zit_next_blk; /* next block in chain */ 75 uint64_t zit_nused; /* bytes in log block used */ 76 zio_block_tail_t zit_bt; /* block trailer */ 77 } zil_trailer_t; 78 79 #define ZIL_MIN_BLKSZ 4096ULL 80 #define ZIL_MAX_BLKSZ SPA_MAXBLOCKSIZE 81 #define ZIL_BLK_DATA_SZ(lwb) ((lwb)->lwb_sz - sizeof (zil_trailer_t)) 82 83 /* 84 * The words of a log block checksum. 85 */ 86 #define ZIL_ZC_GUID_0 0 87 #define ZIL_ZC_GUID_1 1 88 #define ZIL_ZC_OBJSET 2 89 #define ZIL_ZC_SEQ 3 90 91 typedef enum zil_create { 92 Z_FILE, 93 Z_DIR, 94 Z_XATTRDIR, 95 } zil_create_t; 96 97 /* 98 * size of xvattr log section. 99 * its composed of lr_attr_t + xvattr bitmap + 2 64 bit timestamps 100 * for create time and a single 64 bit integer for all of the attributes, 101 * and 4 64 bit integers (32 bytes) for the scanstamp. 102 * 103 */ 104 105 #define ZIL_XVAT_SIZE(mapsize) \ 106 sizeof (lr_attr_t) + (sizeof (uint32_t) * (mapsize - 1)) + \ 107 (sizeof (uint64_t) * 7) 108 109 /* 110 * Size of ACL in log. The ACE data is padded out to properly align 111 * on 8 byte boundary. 112 */ 113 114 #define ZIL_ACE_LENGTH(x) (roundup(x, sizeof (uint64_t))) 115 116 /* 117 * Intent log transaction types and record structures 118 */ 119 #define TX_CREATE 1 /* Create file */ 120 #define TX_MKDIR 2 /* Make directory */ 121 #define TX_MKXATTR 3 /* Make XATTR directory */ 122 #define TX_SYMLINK 4 /* Create symbolic link to a file */ 123 #define TX_REMOVE 5 /* Remove file */ 124 #define TX_RMDIR 6 /* Remove directory */ 125 #define TX_LINK 7 /* Create hard link to a file */ 126 #define TX_RENAME 8 /* Rename a file */ 127 #define TX_WRITE 9 /* File write */ 128 #define TX_TRUNCATE 10 /* Truncate a file */ 129 #define TX_SETATTR 11 /* Set file attributes */ 130 #define TX_ACL_V0 12 /* Set old formatted ACL */ 131 #define TX_ACL 13 /* Set ACL */ 132 #define TX_CREATE_ACL 14 /* create with ACL */ 133 #define TX_CREATE_ATTR 15 /* create + attrs */ 134 #define TX_CREATE_ACL_ATTR 16 /* create with ACL + attrs */ 135 #define TX_MKDIR_ACL 17 /* mkdir with ACL */ 136 #define TX_MKDIR_ATTR 18 /* mkdir with attr */ 137 #define TX_MKDIR_ACL_ATTR 19 /* mkdir with ACL + attrs */ 138 #define TX_MAX_TYPE 20 /* Max transaction type */ 139 140 /* 141 * The transactions for mkdir, symlink, remove, rmdir, link, and rename 142 * may have the following bit set, indicating the original request 143 * specified case-insensitive handling of names. 144 */ 145 #define TX_CI ((uint64_t)0x1 << 63) /* case-insensitive behavior requested */ 146 147 /* 148 * Format of log records. 149 * The fields are carefully defined to allow them to be aligned 150 * and sized the same on sparc & intel architectures. 151 * Each log record has a common structure at the beginning. 152 * 153 * Note, lrc_seq holds two different sequence numbers. Whilst in memory 154 * it contains the transaction sequence number. The log record on 155 * disk holds the sequence number of all log records which is used to 156 * ensure we don't replay the same record. The two sequence numbers are 157 * different because the transactions can now be pushed out of order. 158 */ 159 typedef struct { /* common log record header */ 160 uint64_t lrc_txtype; /* intent log transaction type */ 161 uint64_t lrc_reclen; /* transaction record length */ 162 uint64_t lrc_txg; /* dmu transaction group number */ 163 uint64_t lrc_seq; /* see comment above */ 164 } lr_t; 165 166 /* 167 * Handle option extended vattr attributes. 168 * 169 * Whenever new attributes are added the version number 170 * will need to be updated as will code in 171 * zfs_log.c and zfs_replay.c 172 */ 173 typedef struct { 174 uint32_t lr_attr_masksize; /* number of elements in array */ 175 uint32_t lr_attr_bitmap; /* First entry of array */ 176 /* remainder of array and any additional fields */ 177 } lr_attr_t; 178 179 /* 180 * log record for creates without optional ACL. 181 * This log record does support optional xvattr_t attributes. 182 */ 183 typedef struct { 184 lr_t lr_common; /* common portion of log record */ 185 uint64_t lr_doid; /* object id of directory */ 186 uint64_t lr_foid; /* object id of created file object */ 187 uint64_t lr_mode; /* mode of object */ 188 uint64_t lr_uid; /* uid of object */ 189 uint64_t lr_gid; /* gid of object */ 190 uint64_t lr_gen; /* generation (txg of creation) */ 191 uint64_t lr_crtime[2]; /* creation time */ 192 uint64_t lr_rdev; /* rdev of object to create */ 193 /* name of object to create follows this */ 194 /* for symlinks, link content follows name */ 195 /* for creates with xvattr data, the name follows the xvattr info */ 196 } lr_create_t; 197 198 /* 199 * FUID ACL record will be an array of ACEs from the original ACL. 200 * If this array includes ephemeral IDs, the record will also include 201 * an array of log-specific FUIDs to replace the ephemeral IDs. 202 * Only one copy of each unique domain will be present, so the log-specific 203 * FUIDs will use an index into a compressed domain table. On replay this 204 * information will be used to construct real FUIDs (and bypass idmap, 205 * since it may not be available). 206 */ 207 208 /* 209 * Log record for creates with optional ACL 210 * This log record is also used for recording any FUID 211 * information needed for replaying the create. If the 212 * file doesn't have any actual ACEs then the lr_aclcnt 213 * would be zero. 214 */ 215 typedef struct { 216 lr_create_t lr_create; /* common create portion */ 217 uint64_t lr_aclcnt; /* number of ACEs in ACL */ 218 uint64_t lr_domcnt; /* number of unique domains */ 219 uint64_t lr_fuidcnt; /* number of real fuids */ 220 uint64_t lr_acl_bytes; /* number of bytes in ACL */ 221 uint64_t lr_acl_flags; /* ACL flags */ 222 /* lr_acl_bytes number of variable sized ace's follows */ 223 /* if create is also setting xvattr's, then acl data follows xvattr */ 224 /* if ACE FUIDs are needed then they will follow the xvattr_t */ 225 /* Following the FUIDs will be the domain table information. */ 226 /* The FUIDs for the owner and group will be in the lr_create */ 227 /* portion of the record. */ 228 /* name follows ACL data */ 229 } lr_acl_create_t; 230 231 typedef struct { 232 lr_t lr_common; /* common portion of log record */ 233 uint64_t lr_doid; /* obj id of directory */ 234 /* name of object to remove follows this */ 235 } lr_remove_t; 236 237 typedef struct { 238 lr_t lr_common; /* common portion of log record */ 239 uint64_t lr_doid; /* obj id of directory */ 240 uint64_t lr_link_obj; /* obj id of link */ 241 /* name of object to link follows this */ 242 } lr_link_t; 243 244 typedef struct { 245 lr_t lr_common; /* common portion of log record */ 246 uint64_t lr_sdoid; /* obj id of source directory */ 247 uint64_t lr_tdoid; /* obj id of target directory */ 248 /* 2 strings: names of source and destination follow this */ 249 } lr_rename_t; 250 251 typedef struct { 252 lr_t lr_common; /* common portion of log record */ 253 uint64_t lr_foid; /* file object to write */ 254 uint64_t lr_offset; /* offset to write to */ 255 uint64_t lr_length; /* user data length to write */ 256 uint64_t lr_blkoff; /* offset represented by lr_blkptr */ 257 blkptr_t lr_blkptr; /* spa block pointer for replay */ 258 /* write data will follow for small writes */ 259 } lr_write_t; 260 261 typedef struct { 262 lr_t lr_common; /* common portion of log record */ 263 uint64_t lr_foid; /* object id of file to truncate */ 264 uint64_t lr_offset; /* offset to truncate from */ 265 uint64_t lr_length; /* length to truncate */ 266 } lr_truncate_t; 267 268 typedef struct { 269 lr_t lr_common; /* common portion of log record */ 270 uint64_t lr_foid; /* file object to change attributes */ 271 uint64_t lr_mask; /* mask of attributes to set */ 272 uint64_t lr_mode; /* mode to set */ 273 uint64_t lr_uid; /* uid to set */ 274 uint64_t lr_gid; /* gid to set */ 275 uint64_t lr_size; /* size to set */ 276 uint64_t lr_atime[2]; /* access time */ 277 uint64_t lr_mtime[2]; /* modification time */ 278 /* optional attribute lr_attr_t may be here */ 279 } lr_setattr_t; 280 281 typedef struct { 282 lr_t lr_common; /* common portion of log record */ 283 uint64_t lr_foid; /* obj id of file */ 284 uint64_t lr_aclcnt; /* number of acl entries */ 285 /* lr_aclcnt number of ace_t entries follow this */ 286 } lr_acl_v0_t; 287 288 typedef struct { 289 lr_t lr_common; /* common portion of log record */ 290 uint64_t lr_foid; /* obj id of file */ 291 uint64_t lr_aclcnt; /* number of ACEs in ACL */ 292 uint64_t lr_domcnt; /* number of unique domains */ 293 uint64_t lr_fuidcnt; /* number of real fuids */ 294 uint64_t lr_acl_bytes; /* number of bytes in ACL */ 295 uint64_t lr_acl_flags; /* ACL flags */ 296 /* lr_acl_bytes number of variable sized ace's follows */ 297 } lr_acl_t; 298 299 /* 300 * ZIL structure definitions, interface function prototype and globals. 301 */ 302 303 /* 304 * ZFS intent log transaction structure 305 */ 306 typedef enum { 307 WR_INDIRECT, /* indirect - a large write (dmu_sync() data */ 308 /* and put blkptr in log, rather than actual data) */ 309 WR_COPIED, /* immediate - data is copied into lr_write_t */ 310 WR_NEED_COPY, /* immediate - data needs to be copied if pushed */ 311 } itx_wr_state_t; 312 313 typedef struct itx { 314 list_node_t itx_node; /* linkage on zl_itx_list */ 315 void *itx_private; /* type-specific opaque data */ 316 itx_wr_state_t itx_wr_state; /* write state */ 317 uint8_t itx_sync; /* synchronous transaction */ 318 lr_t itx_lr; /* common part of log record */ 319 /* followed by type-specific part of lr_xx_t and its immediate data */ 320 } itx_t; 321 322 323 /* 324 * zgd_t is passed through dmu_sync() to the callback routine zfs_get_done() 325 * to handle the cleanup of the dmu_sync() buffer write 326 */ 327 typedef struct { 328 zilog_t *zgd_zilog; /* zilog */ 329 blkptr_t *zgd_bp; /* block pointer */ 330 struct rl *zgd_rl; /* range lock */ 331 } zgd_t; 332 333 334 typedef void zil_parse_blk_func_t(zilog_t *zilog, blkptr_t *bp, void *arg, 335 uint64_t txg); 336 typedef void zil_parse_lr_func_t(zilog_t *zilog, lr_t *lr, void *arg, 337 uint64_t txg); 338 typedef int zil_replay_func_t(); 339 typedef int zil_get_data_t(void *arg, lr_write_t *lr, char *dbuf, zio_t *zio); 340 341 extern uint64_t zil_parse(zilog_t *zilog, zil_parse_blk_func_t *parse_blk_func, 342 zil_parse_lr_func_t *parse_lr_func, void *arg, uint64_t txg); 343 344 extern void zil_init(void); 345 extern void zil_fini(void); 346 347 extern zilog_t *zil_alloc(objset_t *os, zil_header_t *zh_phys); 348 extern void zil_free(zilog_t *zilog); 349 350 extern zilog_t *zil_open(objset_t *os, zil_get_data_t *get_data); 351 extern void zil_close(zilog_t *zilog); 352 353 extern void zil_replay(objset_t *os, void *arg, uint64_t *txgp, 354 zil_replay_func_t *replay_func[TX_MAX_TYPE]); 355 extern void zil_destroy(zilog_t *zilog, boolean_t keep_first); 356 extern void zil_rollback_destroy(zilog_t *zilog, dmu_tx_t *tx); 357 358 extern itx_t *zil_itx_create(uint64_t txtype, size_t lrsize); 359 extern uint64_t zil_itx_assign(zilog_t *zilog, itx_t *itx, dmu_tx_t *tx); 360 361 extern void zil_commit(zilog_t *zilog, uint64_t seq, uint64_t oid); 362 363 extern int zil_claim(char *osname, void *txarg); 364 extern void zil_sync(zilog_t *zilog, dmu_tx_t *tx); 365 extern void zil_clean(zilog_t *zilog); 366 extern int zil_is_committed(zilog_t *zilog); 367 368 extern int zil_suspend(zilog_t *zilog); 369 extern void zil_resume(zilog_t *zilog); 370 371 extern void zil_add_block(zilog_t *zilog, blkptr_t *bp); 372 373 extern int zil_disable; 374 375 #ifdef __cplusplus 376 } 377 #endif 378 379 #endif /* _SYS_ZIL_H */ 380