1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 23 */ 24 25 /* Portions Copyright 2010 Robert Milkowski */ 26 27 #ifndef _SYS_DMU_H 28 #define _SYS_DMU_H 29 30 /* 31 * This file describes the interface that the DMU provides for its 32 * consumers. 33 * 34 * The DMU also interacts with the SPA. That interface is described in 35 * dmu_spa.h. 36 */ 37 38 #include <sys/inttypes.h> 39 #include <sys/types.h> 40 #include <sys/param.h> 41 #include <sys/cred.h> 42 #include <sys/time.h> 43 44 #ifdef __cplusplus 45 extern "C" { 46 #endif 47 48 struct uio; 49 struct xuio; 50 struct page; 51 struct vnode; 52 struct spa; 53 struct zilog; 54 struct zio; 55 struct blkptr; 56 struct zap_cursor; 57 struct dsl_dataset; 58 struct dsl_pool; 59 struct dnode; 60 struct drr_begin; 61 struct drr_end; 62 struct zbookmark; 63 struct spa; 64 struct nvlist; 65 struct arc_buf; 66 struct zio_prop; 67 struct sa_handle; 68 69 typedef struct objset objset_t; 70 typedef struct dmu_tx dmu_tx_t; 71 typedef struct dsl_dir dsl_dir_t; 72 73 typedef enum dmu_object_type { 74 DMU_OT_NONE, 75 /* general: */ 76 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 77 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 78 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 79 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 80 DMU_OT_BPOBJ, /* UINT64 */ 81 DMU_OT_BPOBJ_HDR, /* UINT64 */ 82 /* spa: */ 83 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 84 DMU_OT_SPACE_MAP, /* UINT64 */ 85 /* zil: */ 86 DMU_OT_INTENT_LOG, /* UINT64 */ 87 /* dmu: */ 88 DMU_OT_DNODE, /* DNODE */ 89 DMU_OT_OBJSET, /* OBJSET */ 90 /* dsl: */ 91 DMU_OT_DSL_DIR, /* UINT64 */ 92 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 93 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 94 DMU_OT_DSL_PROPS, /* ZAP */ 95 DMU_OT_DSL_DATASET, /* UINT64 */ 96 /* zpl: */ 97 DMU_OT_ZNODE, /* ZNODE */ 98 DMU_OT_OLDACL, /* Old ACL */ 99 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 100 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 101 DMU_OT_MASTER_NODE, /* ZAP */ 102 DMU_OT_UNLINKED_SET, /* ZAP */ 103 /* zvol: */ 104 DMU_OT_ZVOL, /* UINT8 */ 105 DMU_OT_ZVOL_PROP, /* ZAP */ 106 /* other; for testing only! */ 107 DMU_OT_PLAIN_OTHER, /* UINT8 */ 108 DMU_OT_UINT64_OTHER, /* UINT64 */ 109 DMU_OT_ZAP_OTHER, /* ZAP */ 110 /* new object types: */ 111 DMU_OT_ERROR_LOG, /* ZAP */ 112 DMU_OT_SPA_HISTORY, /* UINT8 */ 113 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 114 DMU_OT_POOL_PROPS, /* ZAP */ 115 DMU_OT_DSL_PERMS, /* ZAP */ 116 DMU_OT_ACL, /* ACL */ 117 DMU_OT_SYSACL, /* SYSACL */ 118 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 119 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 120 DMU_OT_NEXT_CLONES, /* ZAP */ 121 DMU_OT_SCAN_QUEUE, /* ZAP */ 122 DMU_OT_USERGROUP_USED, /* ZAP */ 123 DMU_OT_USERGROUP_QUOTA, /* ZAP */ 124 DMU_OT_USERREFS, /* ZAP */ 125 DMU_OT_DDT_ZAP, /* ZAP */ 126 DMU_OT_DDT_STATS, /* ZAP */ 127 DMU_OT_SA, /* System attr */ 128 DMU_OT_SA_MASTER_NODE, /* ZAP */ 129 DMU_OT_SA_ATTR_REGISTRATION, /* ZAP */ 130 DMU_OT_SA_ATTR_LAYOUTS, /* ZAP */ 131 DMU_OT_SCAN_XLATE, /* ZAP */ 132 DMU_OT_DEDUP, /* fake dedup BP from ddt_bp_create() */ 133 DMU_OT_DEADLIST, /* ZAP */ 134 DMU_OT_DEADLIST_HDR, /* UINT64 */ 135 DMU_OT_DSL_CLONES, /* ZAP */ 136 DMU_OT_BPOBJ_SUBOBJ, /* UINT64 */ 137 DMU_OT_NUMTYPES 138 } dmu_object_type_t; 139 140 typedef enum dmu_objset_type { 141 DMU_OST_NONE, 142 DMU_OST_META, 143 DMU_OST_ZFS, 144 DMU_OST_ZVOL, 145 DMU_OST_OTHER, /* For testing only! */ 146 DMU_OST_ANY, /* Be careful! */ 147 DMU_OST_NUMTYPES 148 } dmu_objset_type_t; 149 150 void byteswap_uint64_array(void *buf, size_t size); 151 void byteswap_uint32_array(void *buf, size_t size); 152 void byteswap_uint16_array(void *buf, size_t size); 153 void byteswap_uint8_array(void *buf, size_t size); 154 void zap_byteswap(void *buf, size_t size); 155 void zfs_oldacl_byteswap(void *buf, size_t size); 156 void zfs_acl_byteswap(void *buf, size_t size); 157 void zfs_znode_byteswap(void *buf, size_t size); 158 159 #define DS_FIND_SNAPSHOTS (1<<0) 160 #define DS_FIND_CHILDREN (1<<1) 161 162 /* 163 * The maximum number of bytes that can be accessed as part of one 164 * operation, including metadata. 165 */ 166 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 167 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 168 169 #define DMU_USERUSED_OBJECT (-1ULL) 170 #define DMU_GROUPUSED_OBJECT (-2ULL) 171 #define DMU_DEADLIST_OBJECT (-3ULL) 172 173 /* 174 * artificial blkids for bonus buffer and spill blocks 175 */ 176 #define DMU_BONUS_BLKID (-1ULL) 177 #define DMU_SPILL_BLKID (-2ULL) 178 /* 179 * Public routines to create, destroy, open, and close objsets. 180 */ 181 int dmu_objset_hold(const char *name, void *tag, objset_t **osp); 182 int dmu_objset_own(const char *name, dmu_objset_type_t type, 183 boolean_t readonly, void *tag, objset_t **osp); 184 void dmu_objset_rele(objset_t *os, void *tag); 185 void dmu_objset_disown(objset_t *os, void *tag); 186 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp); 187 188 int dmu_objset_evict_dbufs(objset_t *os); 189 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags, 190 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 191 int dmu_objset_clone(const char *name, struct dsl_dataset *clone_origin, 192 uint64_t flags); 193 int dmu_objset_destroy(const char *name, boolean_t defer); 194 int dmu_snapshots_destroy(char *fsname, char *snapname, boolean_t defer); 195 int dmu_objset_snapshot(char *fsname, char *snapname, struct nvlist *props, 196 boolean_t recursive); 197 int dmu_objset_rename(const char *name, const char *newname, 198 boolean_t recursive); 199 int dmu_objset_find(char *name, int func(const char *, void *), void *arg, 200 int flags); 201 void dmu_objset_byteswap(void *buf, size_t size); 202 203 typedef struct dmu_buf { 204 uint64_t db_object; /* object that this buffer is part of */ 205 uint64_t db_offset; /* byte offset in this object */ 206 uint64_t db_size; /* size of buffer in bytes */ 207 void *db_data; /* data in buffer */ 208 } dmu_buf_t; 209 210 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 211 212 /* 213 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 214 */ 215 #define DMU_POOL_DIRECTORY_OBJECT 1 216 #define DMU_POOL_CONFIG "config" 217 #define DMU_POOL_ROOT_DATASET "root_dataset" 218 #define DMU_POOL_SYNC_BPOBJ "sync_bplist" 219 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 220 #define DMU_POOL_ERRLOG_LAST "errlog_last" 221 #define DMU_POOL_SPARES "spares" 222 #define DMU_POOL_DEFLATE "deflate" 223 #define DMU_POOL_HISTORY "history" 224 #define DMU_POOL_PROPS "pool_props" 225 #define DMU_POOL_L2CACHE "l2cache" 226 #define DMU_POOL_TMP_USERREFS "tmp_userrefs" 227 #define DMU_POOL_DDT "DDT-%s-%s-%s" 228 #define DMU_POOL_DDT_STATS "DDT-statistics" 229 #define DMU_POOL_CREATION_VERSION "creation_version" 230 #define DMU_POOL_SCAN "scan" 231 #define DMU_POOL_FREE_BPOBJ "free_bpobj" 232 233 /* 234 * Allocate an object from this objset. The range of object numbers 235 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 236 * 237 * The transaction must be assigned to a txg. The newly allocated 238 * object will be "held" in the transaction (ie. you can modify the 239 * newly allocated object in this transaction). 240 * 241 * dmu_object_alloc() chooses an object and returns it in *objectp. 242 * 243 * dmu_object_claim() allocates a specific object number. If that 244 * number is already allocated, it fails and returns EEXIST. 245 * 246 * Return 0 on success, or ENOSPC or EEXIST as specified above. 247 */ 248 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 249 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 250 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 251 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 252 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 253 int blocksize, dmu_object_type_t bonustype, int bonuslen); 254 255 /* 256 * Free an object from this objset. 257 * 258 * The object's data will be freed as well (ie. you don't need to call 259 * dmu_free(object, 0, -1, tx)). 260 * 261 * The object need not be held in the transaction. 262 * 263 * If there are any holds on this object's buffers (via dmu_buf_hold()), 264 * or tx holds on the object (via dmu_tx_hold_object()), you can not 265 * free it; it fails and returns EBUSY. 266 * 267 * If the object is not allocated, it fails and returns ENOENT. 268 * 269 * Return 0 on success, or EBUSY or ENOENT as specified above. 270 */ 271 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 272 273 /* 274 * Find the next allocated or free object. 275 * 276 * The objectp parameter is in-out. It will be updated to be the next 277 * object which is allocated. Ignore objects which have not been 278 * modified since txg. 279 * 280 * XXX Can only be called on a objset with no dirty data. 281 * 282 * Returns 0 on success, or ENOENT if there are no more objects. 283 */ 284 int dmu_object_next(objset_t *os, uint64_t *objectp, 285 boolean_t hole, uint64_t txg); 286 287 /* 288 * Set the data blocksize for an object. 289 * 290 * The object cannot have any blocks allcated beyond the first. If 291 * the first block is allocated already, the new size must be greater 292 * than the current block size. If these conditions are not met, 293 * ENOTSUP will be returned. 294 * 295 * Returns 0 on success, or EBUSY if there are any holds on the object 296 * contents, or ENOTSUP as described above. 297 */ 298 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 299 int ibs, dmu_tx_t *tx); 300 301 /* 302 * Set the checksum property on a dnode. The new checksum algorithm will 303 * apply to all newly written blocks; existing blocks will not be affected. 304 */ 305 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 306 dmu_tx_t *tx); 307 308 /* 309 * Set the compress property on a dnode. The new compression algorithm will 310 * apply to all newly written blocks; existing blocks will not be affected. 311 */ 312 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 313 dmu_tx_t *tx); 314 315 /* 316 * Decide how to write a block: checksum, compression, number of copies, etc. 317 */ 318 #define WP_NOFILL 0x1 319 #define WP_DMU_SYNC 0x2 320 #define WP_SPILL 0x4 321 322 void dmu_write_policy(objset_t *os, struct dnode *dn, int level, int wp, 323 struct zio_prop *zp); 324 /* 325 * The bonus data is accessed more or less like a regular buffer. 326 * You must dmu_bonus_hold() to get the buffer, which will give you a 327 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 328 * data. As with any normal buffer, you must call dmu_buf_read() to 329 * read db_data, dmu_buf_will_dirty() before modifying it, and the 330 * object must be held in an assigned transaction before calling 331 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 332 * buffer as well. You must release your hold with dmu_buf_rele(). 333 */ 334 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 335 int dmu_bonus_max(void); 336 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 337 int dmu_set_bonustype(dmu_buf_t *, dmu_object_type_t, dmu_tx_t *); 338 int dmu_rm_spill(objset_t *, uint64_t, dmu_tx_t *); 339 340 /* 341 * Special spill buffer support used by "SA" framework 342 */ 343 344 int dmu_spill_hold_by_bonus(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp); 345 int dmu_spill_hold_by_dnode(struct dnode *dn, uint32_t flags, 346 void *tag, dmu_buf_t **dbp); 347 int dmu_spill_hold_existing(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp); 348 349 /* 350 * Obtain the DMU buffer from the specified object which contains the 351 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 352 * that it will remain in memory. You must release the hold with 353 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 354 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 355 * 356 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 357 * on the returned buffer before reading or writing the buffer's 358 * db_data. The comments for those routines describe what particular 359 * operations are valid after calling them. 360 * 361 * The object number must be a valid, allocated object number. 362 */ 363 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 364 void *tag, dmu_buf_t **, int flags); 365 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 366 void dmu_buf_rele(dmu_buf_t *db, void *tag); 367 uint64_t dmu_buf_refcount(dmu_buf_t *db); 368 369 /* 370 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 371 * range of an object. A pointer to an array of dmu_buf_t*'s is 372 * returned (in *dbpp). 373 * 374 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 375 * frees the array. The hold on the array of buffers MUST be released 376 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 377 * individually with dmu_buf_rele. 378 */ 379 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 380 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 381 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 382 383 /* 384 * Returns NULL on success, or the existing user ptr if it's already 385 * been set. 386 * 387 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 388 * 389 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 390 * will be set to db->db_data when you are allowed to access it. Note 391 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 392 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 393 * *user_data_ptr_ptr will be set to the new value when it changes. 394 * 395 * If non-NULL, pageout func will be called when this buffer is being 396 * excised from the cache, so that you can clean up the data structure 397 * pointed to by user_ptr. 398 * 399 * dmu_evict_user() will call the pageout func for all buffers in a 400 * objset with a given pageout func. 401 */ 402 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 403 dmu_buf_evict_func_t *pageout_func); 404 /* 405 * set_user_ie is the same as set_user, but request immediate eviction 406 * when hold count goes to zero. 407 */ 408 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 409 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 410 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 411 void *user_ptr, void *user_data_ptr_ptr, 412 dmu_buf_evict_func_t *pageout_func); 413 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 414 415 /* 416 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 417 */ 418 void *dmu_buf_get_user(dmu_buf_t *db); 419 420 /* 421 * Indicate that you are going to modify the buffer's data (db_data). 422 * 423 * The transaction (tx) must be assigned to a txg (ie. you've called 424 * dmu_tx_assign()). The buffer's object must be held in the tx 425 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 426 */ 427 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 428 429 /* 430 * Tells if the given dbuf is freeable. 431 */ 432 boolean_t dmu_buf_freeable(dmu_buf_t *); 433 434 /* 435 * You must create a transaction, then hold the objects which you will 436 * (or might) modify as part of this transaction. Then you must assign 437 * the transaction to a transaction group. Once the transaction has 438 * been assigned, you can modify buffers which belong to held objects as 439 * part of this transaction. You can't modify buffers before the 440 * transaction has been assigned; you can't modify buffers which don't 441 * belong to objects which this transaction holds; you can't hold 442 * objects once the transaction has been assigned. You may hold an 443 * object which you are going to free (with dmu_object_free()), but you 444 * don't have to. 445 * 446 * You can abort the transaction before it has been assigned. 447 * 448 * Note that you may hold buffers (with dmu_buf_hold) at any time, 449 * regardless of transaction state. 450 */ 451 452 #define DMU_NEW_OBJECT (-1ULL) 453 #define DMU_OBJECT_END (-1ULL) 454 455 dmu_tx_t *dmu_tx_create(objset_t *os); 456 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 457 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 458 uint64_t len); 459 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name); 460 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 461 void dmu_tx_hold_spill(dmu_tx_t *tx, uint64_t object); 462 void dmu_tx_hold_sa(dmu_tx_t *tx, struct sa_handle *hdl, boolean_t may_grow); 463 void dmu_tx_hold_sa_create(dmu_tx_t *tx, int total_size); 464 void dmu_tx_abort(dmu_tx_t *tx); 465 int dmu_tx_assign(dmu_tx_t *tx, uint64_t txg_how); 466 void dmu_tx_wait(dmu_tx_t *tx); 467 void dmu_tx_commit(dmu_tx_t *tx); 468 469 /* 470 * To register a commit callback, dmu_tx_callback_register() must be called. 471 * 472 * dcb_data is a pointer to caller private data that is passed on as a 473 * callback parameter. The caller is responsible for properly allocating and 474 * freeing it. 475 * 476 * When registering a callback, the transaction must be already created, but 477 * it cannot be committed or aborted. It can be assigned to a txg or not. 478 * 479 * The callback will be called after the transaction has been safely written 480 * to stable storage and will also be called if the dmu_tx is aborted. 481 * If there is any error which prevents the transaction from being committed to 482 * disk, the callback will be called with a value of error != 0. 483 */ 484 typedef void dmu_tx_callback_func_t(void *dcb_data, int error); 485 486 void dmu_tx_callback_register(dmu_tx_t *tx, dmu_tx_callback_func_t *dcb_func, 487 void *dcb_data); 488 489 /* 490 * Free up the data blocks for a defined range of a file. If size is 491 * zero, the range from offset to end-of-file is freed. 492 */ 493 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 494 uint64_t size, dmu_tx_t *tx); 495 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 496 uint64_t size); 497 int dmu_free_object(objset_t *os, uint64_t object); 498 499 /* 500 * Convenience functions. 501 * 502 * Canfail routines will return 0 on success, or an errno if there is a 503 * nonrecoverable I/O error. 504 */ 505 #define DMU_READ_PREFETCH 0 /* prefetch */ 506 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */ 507 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 508 void *buf, uint32_t flags); 509 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 510 const void *buf, dmu_tx_t *tx); 511 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 512 dmu_tx_t *tx); 513 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 514 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 515 dmu_tx_t *tx); 516 int dmu_write_uio_dbuf(dmu_buf_t *zdb, struct uio *uio, uint64_t size, 517 dmu_tx_t *tx); 518 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 519 uint64_t size, struct page *pp, dmu_tx_t *tx); 520 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size); 521 void dmu_return_arcbuf(struct arc_buf *buf); 522 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf, 523 dmu_tx_t *tx); 524 int dmu_xuio_init(struct xuio *uio, int niov); 525 void dmu_xuio_fini(struct xuio *uio); 526 int dmu_xuio_add(struct xuio *uio, struct arc_buf *abuf, offset_t off, 527 size_t n); 528 int dmu_xuio_cnt(struct xuio *uio); 529 struct arc_buf *dmu_xuio_arcbuf(struct xuio *uio, int i); 530 void dmu_xuio_clear(struct xuio *uio, int i); 531 void xuio_stat_wbuf_copied(); 532 void xuio_stat_wbuf_nocopy(); 533 534 extern int zfs_prefetch_disable; 535 536 /* 537 * Asynchronously try to read in the data. 538 */ 539 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 540 uint64_t len); 541 542 typedef struct dmu_object_info { 543 /* All sizes are in bytes unless otherwise indicated. */ 544 uint32_t doi_data_block_size; 545 uint32_t doi_metadata_block_size; 546 dmu_object_type_t doi_type; 547 dmu_object_type_t doi_bonus_type; 548 uint64_t doi_bonus_size; 549 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 550 uint8_t doi_checksum; 551 uint8_t doi_compress; 552 uint8_t doi_pad[5]; 553 uint64_t doi_physical_blocks_512; /* data + metadata, 512b blks */ 554 uint64_t doi_max_offset; 555 uint64_t doi_fill_count; /* number of non-empty blocks */ 556 } dmu_object_info_t; 557 558 typedef void arc_byteswap_func_t(void *buf, size_t size); 559 560 typedef struct dmu_object_type_info { 561 arc_byteswap_func_t *ot_byteswap; 562 boolean_t ot_metadata; 563 char *ot_name; 564 } dmu_object_type_info_t; 565 566 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 567 568 /* 569 * Get information on a DMU object. 570 * 571 * Return 0 on success or ENOENT if object is not allocated. 572 * 573 * If doi is NULL, just indicates whether the object exists. 574 */ 575 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 576 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 577 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 578 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 579 u_longlong_t *nblk512); 580 581 typedef struct dmu_objset_stats { 582 uint64_t dds_num_clones; /* number of clones of this */ 583 uint64_t dds_creation_txg; 584 uint64_t dds_guid; 585 dmu_objset_type_t dds_type; 586 uint8_t dds_is_snapshot; 587 uint8_t dds_inconsistent; 588 char dds_origin[MAXNAMELEN]; 589 } dmu_objset_stats_t; 590 591 /* 592 * Get stats on a dataset. 593 */ 594 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 595 596 /* 597 * Add entries to the nvlist for all the objset's properties. See 598 * zfs_prop_table[] and zfs(1m) for details on the properties. 599 */ 600 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 601 602 /* 603 * Get the space usage statistics for statvfs(). 604 * 605 * refdbytes is the amount of space "referenced" by this objset. 606 * availbytes is the amount of space available to this objset, taking 607 * into account quotas & reservations, assuming that no other objsets 608 * use the space first. These values correspond to the 'referenced' and 609 * 'available' properties, described in the zfs(1m) manpage. 610 * 611 * usedobjs and availobjs are the number of objects currently allocated, 612 * and available. 613 */ 614 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 615 uint64_t *usedobjsp, uint64_t *availobjsp); 616 617 /* 618 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 619 * (Contrast with the ds_guid which is a 64-bit ID that will never 620 * change, so there is a small probability that it will collide.) 621 */ 622 uint64_t dmu_objset_fsid_guid(objset_t *os); 623 624 /* 625 * Get the [cm]time for an objset's snapshot dir 626 */ 627 timestruc_t dmu_objset_snap_cmtime(objset_t *os); 628 629 int dmu_objset_is_snapshot(objset_t *os); 630 631 extern struct spa *dmu_objset_spa(objset_t *os); 632 extern struct zilog *dmu_objset_zil(objset_t *os); 633 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 634 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 635 extern void dmu_objset_name(objset_t *os, char *buf); 636 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 637 extern uint64_t dmu_objset_id(objset_t *os); 638 extern uint64_t dmu_objset_syncprop(objset_t *os); 639 extern uint64_t dmu_objset_logbias(objset_t *os); 640 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 641 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 642 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 643 int maxlen, boolean_t *conflict); 644 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 645 uint64_t *idp, uint64_t *offp); 646 647 typedef int objset_used_cb_t(dmu_object_type_t bonustype, 648 void *bonus, uint64_t *userp, uint64_t *groupp); 649 extern void dmu_objset_register_type(dmu_objset_type_t ost, 650 objset_used_cb_t *cb); 651 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 652 extern void *dmu_objset_get_user(objset_t *os); 653 654 /* 655 * Return the txg number for the given assigned transaction. 656 */ 657 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 658 659 /* 660 * Synchronous write. 661 * If a parent zio is provided this function initiates a write on the 662 * provided buffer as a child of the parent zio. 663 * In the absence of a parent zio, the write is completed synchronously. 664 * At write completion, blk is filled with the bp of the written block. 665 * Note that while the data covered by this function will be on stable 666 * storage when the write completes this new data does not become a 667 * permanent part of the file until the associated transaction commits. 668 */ 669 670 /* 671 * {zfs,zvol,ztest}_get_done() args 672 */ 673 typedef struct zgd { 674 struct zilog *zgd_zilog; 675 struct blkptr *zgd_bp; 676 dmu_buf_t *zgd_db; 677 struct rl *zgd_rl; 678 void *zgd_private; 679 } zgd_t; 680 681 typedef void dmu_sync_cb_t(zgd_t *arg, int error); 682 int dmu_sync(struct zio *zio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd); 683 684 /* 685 * Find the next hole or data block in file starting at *off 686 * Return found offset in *off. Return ESRCH for end of file. 687 */ 688 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 689 uint64_t *off); 690 691 /* 692 * Initial setup and final teardown. 693 */ 694 extern void dmu_init(void); 695 extern void dmu_fini(void); 696 697 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 698 uint64_t object, uint64_t offset, int len); 699 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 700 dmu_traverse_cb_t cb, void *arg); 701 702 int dmu_sendbackup(objset_t *tosnap, objset_t *fromsnap, boolean_t fromorigin, 703 struct vnode *vp, offset_t *off); 704 705 typedef struct dmu_recv_cookie { 706 /* 707 * This structure is opaque! 708 * 709 * If logical and real are different, we are recving the stream 710 * into the "real" temporary clone, and then switching it with 711 * the "logical" target. 712 */ 713 struct dsl_dataset *drc_logical_ds; 714 struct dsl_dataset *drc_real_ds; 715 struct drr_begin *drc_drrb; 716 char *drc_tosnap; 717 char *drc_top_ds; 718 boolean_t drc_newfs; 719 boolean_t drc_force; 720 } dmu_recv_cookie_t; 721 722 int dmu_recv_begin(char *tofs, char *tosnap, char *topds, struct drr_begin *, 723 boolean_t force, objset_t *origin, dmu_recv_cookie_t *); 724 int dmu_recv_stream(dmu_recv_cookie_t *drc, struct vnode *vp, offset_t *voffp); 725 int dmu_recv_end(dmu_recv_cookie_t *drc); 726 727 /* CRC64 table */ 728 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 729 extern uint64_t zfs_crc64_table[256]; 730 731 #ifdef __cplusplus 732 } 733 #endif 734 735 #endif /* _SYS_DMU_H */ 736