1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 24 * Copyright (c) 2011, 2014 by Delphix. All rights reserved. 25 * Copyright 2011 Nexenta Systems, Inc. All rights reserved. 26 * Copyright (c) 2012, Joyent, Inc. All rights reserved. 27 * Copyright 2013 DEY Storage Systems, Inc. 28 */ 29 30 /* Portions Copyright 2010 Robert Milkowski */ 31 32 #ifndef _SYS_DMU_H 33 #define _SYS_DMU_H 34 35 /* 36 * This file describes the interface that the DMU provides for its 37 * consumers. 38 * 39 * The DMU also interacts with the SPA. That interface is described in 40 * dmu_spa.h. 41 */ 42 43 #include <sys/inttypes.h> 44 #include <sys/types.h> 45 #include <sys/param.h> 46 #include <sys/cred.h> 47 #include <sys/time.h> 48 #include <sys/fs/zfs.h> 49 50 #ifdef __cplusplus 51 extern "C" { 52 #endif 53 54 struct uio; 55 struct xuio; 56 struct page; 57 struct vnode; 58 struct spa; 59 struct zilog; 60 struct zio; 61 struct blkptr; 62 struct zap_cursor; 63 struct dsl_dataset; 64 struct dsl_pool; 65 struct dnode; 66 struct drr_begin; 67 struct drr_end; 68 struct zbookmark_phys; 69 struct spa; 70 struct nvlist; 71 struct arc_buf; 72 struct zio_prop; 73 struct sa_handle; 74 75 typedef struct objset objset_t; 76 typedef struct dmu_tx dmu_tx_t; 77 typedef struct dsl_dir dsl_dir_t; 78 79 typedef enum dmu_object_byteswap { 80 DMU_BSWAP_UINT8, 81 DMU_BSWAP_UINT16, 82 DMU_BSWAP_UINT32, 83 DMU_BSWAP_UINT64, 84 DMU_BSWAP_ZAP, 85 DMU_BSWAP_DNODE, 86 DMU_BSWAP_OBJSET, 87 DMU_BSWAP_ZNODE, 88 DMU_BSWAP_OLDACL, 89 DMU_BSWAP_ACL, 90 /* 91 * Allocating a new byteswap type number makes the on-disk format 92 * incompatible with any other format that uses the same number. 93 * 94 * Data can usually be structured to work with one of the 95 * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types. 96 */ 97 DMU_BSWAP_NUMFUNCS 98 } dmu_object_byteswap_t; 99 100 #define DMU_OT_NEWTYPE 0x80 101 #define DMU_OT_METADATA 0x40 102 #define DMU_OT_BYTESWAP_MASK 0x3f 103 104 /* 105 * Defines a uint8_t object type. Object types specify if the data 106 * in the object is metadata (boolean) and how to byteswap the data 107 * (dmu_object_byteswap_t). 108 */ 109 #define DMU_OT(byteswap, metadata) \ 110 (DMU_OT_NEWTYPE | \ 111 ((metadata) ? DMU_OT_METADATA : 0) | \ 112 ((byteswap) & DMU_OT_BYTESWAP_MASK)) 113 114 #define DMU_OT_IS_VALID(ot) (((ot) & DMU_OT_NEWTYPE) ? \ 115 ((ot) & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS : \ 116 (ot) < DMU_OT_NUMTYPES) 117 118 #define DMU_OT_IS_METADATA(ot) (((ot) & DMU_OT_NEWTYPE) ? \ 119 ((ot) & DMU_OT_METADATA) : \ 120 dmu_ot[(ot)].ot_metadata) 121 122 /* 123 * These object types use bp_fill != 1 for their L0 bp's. Therefore they can't 124 * have their data embedded (i.e. use a BP_IS_EMBEDDED() bp), because bp_fill 125 * is repurposed for embedded BPs. 126 */ 127 #define DMU_OT_HAS_FILL(ot) \ 128 ((ot) == DMU_OT_DNODE || (ot) == DMU_OT_OBJSET) 129 130 #define DMU_OT_BYTESWAP(ot) (((ot) & DMU_OT_NEWTYPE) ? \ 131 ((ot) & DMU_OT_BYTESWAP_MASK) : \ 132 dmu_ot[(ot)].ot_byteswap) 133 134 typedef enum dmu_object_type { 135 DMU_OT_NONE, 136 /* general: */ 137 DMU_OT_OBJECT_DIRECTORY, /* ZAP */ 138 DMU_OT_OBJECT_ARRAY, /* UINT64 */ 139 DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ 140 DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ 141 DMU_OT_BPOBJ, /* UINT64 */ 142 DMU_OT_BPOBJ_HDR, /* UINT64 */ 143 /* spa: */ 144 DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ 145 DMU_OT_SPACE_MAP, /* UINT64 */ 146 /* zil: */ 147 DMU_OT_INTENT_LOG, /* UINT64 */ 148 /* dmu: */ 149 DMU_OT_DNODE, /* DNODE */ 150 DMU_OT_OBJSET, /* OBJSET */ 151 /* dsl: */ 152 DMU_OT_DSL_DIR, /* UINT64 */ 153 DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ 154 DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ 155 DMU_OT_DSL_PROPS, /* ZAP */ 156 DMU_OT_DSL_DATASET, /* UINT64 */ 157 /* zpl: */ 158 DMU_OT_ZNODE, /* ZNODE */ 159 DMU_OT_OLDACL, /* Old ACL */ 160 DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ 161 DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ 162 DMU_OT_MASTER_NODE, /* ZAP */ 163 DMU_OT_UNLINKED_SET, /* ZAP */ 164 /* zvol: */ 165 DMU_OT_ZVOL, /* UINT8 */ 166 DMU_OT_ZVOL_PROP, /* ZAP */ 167 /* other; for testing only! */ 168 DMU_OT_PLAIN_OTHER, /* UINT8 */ 169 DMU_OT_UINT64_OTHER, /* UINT64 */ 170 DMU_OT_ZAP_OTHER, /* ZAP */ 171 /* new object types: */ 172 DMU_OT_ERROR_LOG, /* ZAP */ 173 DMU_OT_SPA_HISTORY, /* UINT8 */ 174 DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ 175 DMU_OT_POOL_PROPS, /* ZAP */ 176 DMU_OT_DSL_PERMS, /* ZAP */ 177 DMU_OT_ACL, /* ACL */ 178 DMU_OT_SYSACL, /* SYSACL */ 179 DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ 180 DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ 181 DMU_OT_NEXT_CLONES, /* ZAP */ 182 DMU_OT_SCAN_QUEUE, /* ZAP */ 183 DMU_OT_USERGROUP_USED, /* ZAP */ 184 DMU_OT_USERGROUP_QUOTA, /* ZAP */ 185 DMU_OT_USERREFS, /* ZAP */ 186 DMU_OT_DDT_ZAP, /* ZAP */ 187 DMU_OT_DDT_STATS, /* ZAP */ 188 DMU_OT_SA, /* System attr */ 189 DMU_OT_SA_MASTER_NODE, /* ZAP */ 190 DMU_OT_SA_ATTR_REGISTRATION, /* ZAP */ 191 DMU_OT_SA_ATTR_LAYOUTS, /* ZAP */ 192 DMU_OT_SCAN_XLATE, /* ZAP */ 193 DMU_OT_DEDUP, /* fake dedup BP from ddt_bp_create() */ 194 DMU_OT_DEADLIST, /* ZAP */ 195 DMU_OT_DEADLIST_HDR, /* UINT64 */ 196 DMU_OT_DSL_CLONES, /* ZAP */ 197 DMU_OT_BPOBJ_SUBOBJ, /* UINT64 */ 198 /* 199 * Do not allocate new object types here. Doing so makes the on-disk 200 * format incompatible with any other format that uses the same object 201 * type number. 202 * 203 * When creating an object which does not have one of the above types 204 * use the DMU_OTN_* type with the correct byteswap and metadata 205 * values. 206 * 207 * The DMU_OTN_* types do not have entries in the dmu_ot table, 208 * use the DMU_OT_IS_METDATA() and DMU_OT_BYTESWAP() macros instead 209 * of indexing into dmu_ot directly (this works for both DMU_OT_* types 210 * and DMU_OTN_* types). 211 */ 212 DMU_OT_NUMTYPES, 213 214 /* 215 * Names for valid types declared with DMU_OT(). 216 */ 217 DMU_OTN_UINT8_DATA = DMU_OT(DMU_BSWAP_UINT8, B_FALSE), 218 DMU_OTN_UINT8_METADATA = DMU_OT(DMU_BSWAP_UINT8, B_TRUE), 219 DMU_OTN_UINT16_DATA = DMU_OT(DMU_BSWAP_UINT16, B_FALSE), 220 DMU_OTN_UINT16_METADATA = DMU_OT(DMU_BSWAP_UINT16, B_TRUE), 221 DMU_OTN_UINT32_DATA = DMU_OT(DMU_BSWAP_UINT32, B_FALSE), 222 DMU_OTN_UINT32_METADATA = DMU_OT(DMU_BSWAP_UINT32, B_TRUE), 223 DMU_OTN_UINT64_DATA = DMU_OT(DMU_BSWAP_UINT64, B_FALSE), 224 DMU_OTN_UINT64_METADATA = DMU_OT(DMU_BSWAP_UINT64, B_TRUE), 225 DMU_OTN_ZAP_DATA = DMU_OT(DMU_BSWAP_ZAP, B_FALSE), 226 DMU_OTN_ZAP_METADATA = DMU_OT(DMU_BSWAP_ZAP, B_TRUE), 227 } dmu_object_type_t; 228 229 typedef enum txg_how { 230 TXG_WAIT = 1, 231 TXG_NOWAIT, 232 TXG_WAITED, 233 } txg_how_t; 234 235 void byteswap_uint64_array(void *buf, size_t size); 236 void byteswap_uint32_array(void *buf, size_t size); 237 void byteswap_uint16_array(void *buf, size_t size); 238 void byteswap_uint8_array(void *buf, size_t size); 239 void zap_byteswap(void *buf, size_t size); 240 void zfs_oldacl_byteswap(void *buf, size_t size); 241 void zfs_acl_byteswap(void *buf, size_t size); 242 void zfs_znode_byteswap(void *buf, size_t size); 243 244 #define DS_FIND_SNAPSHOTS (1<<0) 245 #define DS_FIND_CHILDREN (1<<1) 246 247 /* 248 * The maximum number of bytes that can be accessed as part of one 249 * operation, including metadata. 250 */ 251 #define DMU_MAX_ACCESS (10<<20) /* 10MB */ 252 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */ 253 254 #define DMU_USERUSED_OBJECT (-1ULL) 255 #define DMU_GROUPUSED_OBJECT (-2ULL) 256 257 /* 258 * artificial blkids for bonus buffer and spill blocks 259 */ 260 #define DMU_BONUS_BLKID (-1ULL) 261 #define DMU_SPILL_BLKID (-2ULL) 262 /* 263 * Public routines to create, destroy, open, and close objsets. 264 */ 265 int dmu_objset_hold(const char *name, void *tag, objset_t **osp); 266 int dmu_objset_own(const char *name, dmu_objset_type_t type, 267 boolean_t readonly, void *tag, objset_t **osp); 268 void dmu_objset_rele(objset_t *os, void *tag); 269 void dmu_objset_disown(objset_t *os, void *tag); 270 int dmu_objset_open_ds(struct dsl_dataset *ds, objset_t **osp); 271 272 void dmu_objset_evict_dbufs(objset_t *os); 273 int dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags, 274 void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg); 275 int dmu_objset_clone(const char *name, const char *origin); 276 int dsl_destroy_snapshots_nvl(struct nvlist *snaps, boolean_t defer, 277 struct nvlist *errlist); 278 int dmu_objset_snapshot_one(const char *fsname, const char *snapname); 279 int dmu_objset_snapshot_tmp(const char *, const char *, int); 280 int dmu_objset_find(char *name, int func(const char *, void *), void *arg, 281 int flags); 282 void dmu_objset_byteswap(void *buf, size_t size); 283 int dsl_dataset_rename_snapshot(const char *fsname, 284 const char *oldsnapname, const char *newsnapname, boolean_t recursive); 285 286 typedef struct dmu_buf { 287 uint64_t db_object; /* object that this buffer is part of */ 288 uint64_t db_offset; /* byte offset in this object */ 289 uint64_t db_size; /* size of buffer in bytes */ 290 void *db_data; /* data in buffer */ 291 } dmu_buf_t; 292 293 typedef void dmu_buf_evict_func_t(struct dmu_buf *db, void *user_ptr); 294 295 /* 296 * The names of zap entries in the DIRECTORY_OBJECT of the MOS. 297 */ 298 #define DMU_POOL_DIRECTORY_OBJECT 1 299 #define DMU_POOL_CONFIG "config" 300 #define DMU_POOL_FEATURES_FOR_WRITE "features_for_write" 301 #define DMU_POOL_FEATURES_FOR_READ "features_for_read" 302 #define DMU_POOL_FEATURE_DESCRIPTIONS "feature_descriptions" 303 #define DMU_POOL_FEATURE_ENABLED_TXG "feature_enabled_txg" 304 #define DMU_POOL_ROOT_DATASET "root_dataset" 305 #define DMU_POOL_SYNC_BPOBJ "sync_bplist" 306 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" 307 #define DMU_POOL_ERRLOG_LAST "errlog_last" 308 #define DMU_POOL_SPARES "spares" 309 #define DMU_POOL_DEFLATE "deflate" 310 #define DMU_POOL_HISTORY "history" 311 #define DMU_POOL_PROPS "pool_props" 312 #define DMU_POOL_L2CACHE "l2cache" 313 #define DMU_POOL_TMP_USERREFS "tmp_userrefs" 314 #define DMU_POOL_DDT "DDT-%s-%s-%s" 315 #define DMU_POOL_DDT_STATS "DDT-statistics" 316 #define DMU_POOL_CREATION_VERSION "creation_version" 317 #define DMU_POOL_SCAN "scan" 318 #define DMU_POOL_FREE_BPOBJ "free_bpobj" 319 #define DMU_POOL_BPTREE_OBJ "bptree_obj" 320 #define DMU_POOL_EMPTY_BPOBJ "empty_bpobj" 321 322 /* 323 * Allocate an object from this objset. The range of object numbers 324 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode. 325 * 326 * The transaction must be assigned to a txg. The newly allocated 327 * object will be "held" in the transaction (ie. you can modify the 328 * newly allocated object in this transaction). 329 * 330 * dmu_object_alloc() chooses an object and returns it in *objectp. 331 * 332 * dmu_object_claim() allocates a specific object number. If that 333 * number is already allocated, it fails and returns EEXIST. 334 * 335 * Return 0 on success, or ENOSPC or EEXIST as specified above. 336 */ 337 uint64_t dmu_object_alloc(objset_t *os, dmu_object_type_t ot, 338 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 339 int dmu_object_claim(objset_t *os, uint64_t object, dmu_object_type_t ot, 340 int blocksize, dmu_object_type_t bonus_type, int bonus_len, dmu_tx_t *tx); 341 int dmu_object_reclaim(objset_t *os, uint64_t object, dmu_object_type_t ot, 342 int blocksize, dmu_object_type_t bonustype, int bonuslen); 343 344 /* 345 * Free an object from this objset. 346 * 347 * The object's data will be freed as well (ie. you don't need to call 348 * dmu_free(object, 0, -1, tx)). 349 * 350 * The object need not be held in the transaction. 351 * 352 * If there are any holds on this object's buffers (via dmu_buf_hold()), 353 * or tx holds on the object (via dmu_tx_hold_object()), you can not 354 * free it; it fails and returns EBUSY. 355 * 356 * If the object is not allocated, it fails and returns ENOENT. 357 * 358 * Return 0 on success, or EBUSY or ENOENT as specified above. 359 */ 360 int dmu_object_free(objset_t *os, uint64_t object, dmu_tx_t *tx); 361 362 /* 363 * Find the next allocated or free object. 364 * 365 * The objectp parameter is in-out. It will be updated to be the next 366 * object which is allocated. Ignore objects which have not been 367 * modified since txg. 368 * 369 * XXX Can only be called on a objset with no dirty data. 370 * 371 * Returns 0 on success, or ENOENT if there are no more objects. 372 */ 373 int dmu_object_next(objset_t *os, uint64_t *objectp, 374 boolean_t hole, uint64_t txg); 375 376 /* 377 * Set the data blocksize for an object. 378 * 379 * The object cannot have any blocks allcated beyond the first. If 380 * the first block is allocated already, the new size must be greater 381 * than the current block size. If these conditions are not met, 382 * ENOTSUP will be returned. 383 * 384 * Returns 0 on success, or EBUSY if there are any holds on the object 385 * contents, or ENOTSUP as described above. 386 */ 387 int dmu_object_set_blocksize(objset_t *os, uint64_t object, uint64_t size, 388 int ibs, dmu_tx_t *tx); 389 390 /* 391 * Set the checksum property on a dnode. The new checksum algorithm will 392 * apply to all newly written blocks; existing blocks will not be affected. 393 */ 394 void dmu_object_set_checksum(objset_t *os, uint64_t object, uint8_t checksum, 395 dmu_tx_t *tx); 396 397 /* 398 * Set the compress property on a dnode. The new compression algorithm will 399 * apply to all newly written blocks; existing blocks will not be affected. 400 */ 401 void dmu_object_set_compress(objset_t *os, uint64_t object, uint8_t compress, 402 dmu_tx_t *tx); 403 404 void 405 dmu_write_embedded(objset_t *os, uint64_t object, uint64_t offset, 406 void *data, uint8_t etype, uint8_t comp, int uncompressed_size, 407 int compressed_size, int byteorder, dmu_tx_t *tx); 408 409 /* 410 * Decide how to write a block: checksum, compression, number of copies, etc. 411 */ 412 #define WP_NOFILL 0x1 413 #define WP_DMU_SYNC 0x2 414 #define WP_SPILL 0x4 415 416 void dmu_write_policy(objset_t *os, struct dnode *dn, int level, int wp, 417 struct zio_prop *zp); 418 /* 419 * The bonus data is accessed more or less like a regular buffer. 420 * You must dmu_bonus_hold() to get the buffer, which will give you a 421 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus 422 * data. As with any normal buffer, you must call dmu_buf_read() to 423 * read db_data, dmu_buf_will_dirty() before modifying it, and the 424 * object must be held in an assigned transaction before calling 425 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus 426 * buffer as well. You must release your hold with dmu_buf_rele(). 427 * 428 * Returns ENOENT, EIO, or 0. 429 */ 430 int dmu_bonus_hold(objset_t *os, uint64_t object, void *tag, dmu_buf_t **); 431 int dmu_bonus_max(void); 432 int dmu_set_bonus(dmu_buf_t *, int, dmu_tx_t *); 433 int dmu_set_bonustype(dmu_buf_t *, dmu_object_type_t, dmu_tx_t *); 434 dmu_object_type_t dmu_get_bonustype(dmu_buf_t *); 435 int dmu_rm_spill(objset_t *, uint64_t, dmu_tx_t *); 436 437 /* 438 * Special spill buffer support used by "SA" framework 439 */ 440 441 int dmu_spill_hold_by_bonus(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp); 442 int dmu_spill_hold_by_dnode(struct dnode *dn, uint32_t flags, 443 void *tag, dmu_buf_t **dbp); 444 int dmu_spill_hold_existing(dmu_buf_t *bonus, void *tag, dmu_buf_t **dbp); 445 446 /* 447 * Obtain the DMU buffer from the specified object which contains the 448 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so 449 * that it will remain in memory. You must release the hold with 450 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your 451 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU. 452 * 453 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill 454 * on the returned buffer before reading or writing the buffer's 455 * db_data. The comments for those routines describe what particular 456 * operations are valid after calling them. 457 * 458 * The object number must be a valid, allocated object number. 459 */ 460 int dmu_buf_hold(objset_t *os, uint64_t object, uint64_t offset, 461 void *tag, dmu_buf_t **, int flags); 462 void dmu_buf_add_ref(dmu_buf_t *db, void* tag); 463 void dmu_buf_rele(dmu_buf_t *db, void *tag); 464 uint64_t dmu_buf_refcount(dmu_buf_t *db); 465 466 /* 467 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a 468 * range of an object. A pointer to an array of dmu_buf_t*'s is 469 * returned (in *dbpp). 470 * 471 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and 472 * frees the array. The hold on the array of buffers MUST be released 473 * with dmu_buf_rele_array. You can NOT release the hold on each buffer 474 * individually with dmu_buf_rele. 475 */ 476 int dmu_buf_hold_array_by_bonus(dmu_buf_t *db, uint64_t offset, 477 uint64_t length, int read, void *tag, int *numbufsp, dmu_buf_t ***dbpp); 478 void dmu_buf_rele_array(dmu_buf_t **, int numbufs, void *tag); 479 480 /* 481 * Returns NULL on success, or the existing user ptr if it's already 482 * been set. 483 * 484 * user_ptr is for use by the user and can be obtained via dmu_buf_get_user(). 485 * 486 * user_data_ptr_ptr should be NULL, or a pointer to a pointer which 487 * will be set to db->db_data when you are allowed to access it. Note 488 * that db->db_data (the pointer) can change when you do dmu_buf_read(), 489 * dmu_buf_tryupgrade(), dmu_buf_will_dirty(), or dmu_buf_will_fill(). 490 * *user_data_ptr_ptr will be set to the new value when it changes. 491 * 492 * If non-NULL, pageout func will be called when this buffer is being 493 * excised from the cache, so that you can clean up the data structure 494 * pointed to by user_ptr. 495 * 496 * dmu_evict_user() will call the pageout func for all buffers in a 497 * objset with a given pageout func. 498 */ 499 void *dmu_buf_set_user(dmu_buf_t *db, void *user_ptr, void *user_data_ptr_ptr, 500 dmu_buf_evict_func_t *pageout_func); 501 /* 502 * set_user_ie is the same as set_user, but request immediate eviction 503 * when hold count goes to zero. 504 */ 505 void *dmu_buf_set_user_ie(dmu_buf_t *db, void *user_ptr, 506 void *user_data_ptr_ptr, dmu_buf_evict_func_t *pageout_func); 507 void *dmu_buf_update_user(dmu_buf_t *db_fake, void *old_user_ptr, 508 void *user_ptr, void *user_data_ptr_ptr, 509 dmu_buf_evict_func_t *pageout_func); 510 void dmu_evict_user(objset_t *os, dmu_buf_evict_func_t *func); 511 512 /* 513 * Returns the user_ptr set with dmu_buf_set_user(), or NULL if not set. 514 */ 515 void *dmu_buf_get_user(dmu_buf_t *db); 516 517 /* 518 * Returns the blkptr associated with this dbuf, or NULL if not set. 519 */ 520 struct blkptr *dmu_buf_get_blkptr(dmu_buf_t *db); 521 522 /* 523 * Indicate that you are going to modify the buffer's data (db_data). 524 * 525 * The transaction (tx) must be assigned to a txg (ie. you've called 526 * dmu_tx_assign()). The buffer's object must be held in the tx 527 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)). 528 */ 529 void dmu_buf_will_dirty(dmu_buf_t *db, dmu_tx_t *tx); 530 531 /* 532 * Tells if the given dbuf is freeable. 533 */ 534 boolean_t dmu_buf_freeable(dmu_buf_t *); 535 536 /* 537 * You must create a transaction, then hold the objects which you will 538 * (or might) modify as part of this transaction. Then you must assign 539 * the transaction to a transaction group. Once the transaction has 540 * been assigned, you can modify buffers which belong to held objects as 541 * part of this transaction. You can't modify buffers before the 542 * transaction has been assigned; you can't modify buffers which don't 543 * belong to objects which this transaction holds; you can't hold 544 * objects once the transaction has been assigned. You may hold an 545 * object which you are going to free (with dmu_object_free()), but you 546 * don't have to. 547 * 548 * You can abort the transaction before it has been assigned. 549 * 550 * Note that you may hold buffers (with dmu_buf_hold) at any time, 551 * regardless of transaction state. 552 */ 553 554 #define DMU_NEW_OBJECT (-1ULL) 555 #define DMU_OBJECT_END (-1ULL) 556 557 dmu_tx_t *dmu_tx_create(objset_t *os); 558 void dmu_tx_hold_write(dmu_tx_t *tx, uint64_t object, uint64_t off, int len); 559 void dmu_tx_hold_free(dmu_tx_t *tx, uint64_t object, uint64_t off, 560 uint64_t len); 561 void dmu_tx_hold_zap(dmu_tx_t *tx, uint64_t object, int add, const char *name); 562 void dmu_tx_hold_bonus(dmu_tx_t *tx, uint64_t object); 563 void dmu_tx_hold_spill(dmu_tx_t *tx, uint64_t object); 564 void dmu_tx_hold_sa(dmu_tx_t *tx, struct sa_handle *hdl, boolean_t may_grow); 565 void dmu_tx_hold_sa_create(dmu_tx_t *tx, int total_size); 566 void dmu_tx_abort(dmu_tx_t *tx); 567 int dmu_tx_assign(dmu_tx_t *tx, enum txg_how txg_how); 568 void dmu_tx_wait(dmu_tx_t *tx); 569 void dmu_tx_commit(dmu_tx_t *tx); 570 void dmu_tx_mark_netfree(dmu_tx_t *tx); 571 572 /* 573 * To register a commit callback, dmu_tx_callback_register() must be called. 574 * 575 * dcb_data is a pointer to caller private data that is passed on as a 576 * callback parameter. The caller is responsible for properly allocating and 577 * freeing it. 578 * 579 * When registering a callback, the transaction must be already created, but 580 * it cannot be committed or aborted. It can be assigned to a txg or not. 581 * 582 * The callback will be called after the transaction has been safely written 583 * to stable storage and will also be called if the dmu_tx is aborted. 584 * If there is any error which prevents the transaction from being committed to 585 * disk, the callback will be called with a value of error != 0. 586 */ 587 typedef void dmu_tx_callback_func_t(void *dcb_data, int error); 588 589 void dmu_tx_callback_register(dmu_tx_t *tx, dmu_tx_callback_func_t *dcb_func, 590 void *dcb_data); 591 592 /* 593 * Free up the data blocks for a defined range of a file. If size is 594 * -1, the range from offset to end-of-file is freed. 595 */ 596 int dmu_free_range(objset_t *os, uint64_t object, uint64_t offset, 597 uint64_t size, dmu_tx_t *tx); 598 int dmu_free_long_range(objset_t *os, uint64_t object, uint64_t offset, 599 uint64_t size); 600 int dmu_free_long_object(objset_t *os, uint64_t object); 601 602 /* 603 * Convenience functions. 604 * 605 * Canfail routines will return 0 on success, or an errno if there is a 606 * nonrecoverable I/O error. 607 */ 608 #define DMU_READ_PREFETCH 0 /* prefetch */ 609 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */ 610 int dmu_read(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 611 void *buf, uint32_t flags); 612 void dmu_write(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 613 const void *buf, dmu_tx_t *tx); 614 void dmu_prealloc(objset_t *os, uint64_t object, uint64_t offset, uint64_t size, 615 dmu_tx_t *tx); 616 int dmu_read_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size); 617 int dmu_write_uio(objset_t *os, uint64_t object, struct uio *uio, uint64_t size, 618 dmu_tx_t *tx); 619 int dmu_write_uio_dbuf(dmu_buf_t *zdb, struct uio *uio, uint64_t size, 620 dmu_tx_t *tx); 621 int dmu_write_pages(objset_t *os, uint64_t object, uint64_t offset, 622 uint64_t size, struct page *pp, dmu_tx_t *tx); 623 struct arc_buf *dmu_request_arcbuf(dmu_buf_t *handle, int size); 624 void dmu_return_arcbuf(struct arc_buf *buf); 625 void dmu_assign_arcbuf(dmu_buf_t *handle, uint64_t offset, struct arc_buf *buf, 626 dmu_tx_t *tx); 627 int dmu_xuio_init(struct xuio *uio, int niov); 628 void dmu_xuio_fini(struct xuio *uio); 629 int dmu_xuio_add(struct xuio *uio, struct arc_buf *abuf, offset_t off, 630 size_t n); 631 int dmu_xuio_cnt(struct xuio *uio); 632 struct arc_buf *dmu_xuio_arcbuf(struct xuio *uio, int i); 633 void dmu_xuio_clear(struct xuio *uio, int i); 634 void xuio_stat_wbuf_copied(); 635 void xuio_stat_wbuf_nocopy(); 636 637 extern int zfs_prefetch_disable; 638 639 /* 640 * Asynchronously try to read in the data. 641 */ 642 void dmu_prefetch(objset_t *os, uint64_t object, uint64_t offset, 643 uint64_t len); 644 645 typedef struct dmu_object_info { 646 /* All sizes are in bytes unless otherwise indicated. */ 647 uint32_t doi_data_block_size; 648 uint32_t doi_metadata_block_size; 649 dmu_object_type_t doi_type; 650 dmu_object_type_t doi_bonus_type; 651 uint64_t doi_bonus_size; 652 uint8_t doi_indirection; /* 2 = dnode->indirect->data */ 653 uint8_t doi_checksum; 654 uint8_t doi_compress; 655 uint8_t doi_pad[5]; 656 uint64_t doi_physical_blocks_512; /* data + metadata, 512b blks */ 657 uint64_t doi_max_offset; 658 uint64_t doi_fill_count; /* number of non-empty blocks */ 659 } dmu_object_info_t; 660 661 typedef void arc_byteswap_func_t(void *buf, size_t size); 662 663 typedef struct dmu_object_type_info { 664 dmu_object_byteswap_t ot_byteswap; 665 boolean_t ot_metadata; 666 char *ot_name; 667 } dmu_object_type_info_t; 668 669 typedef struct dmu_object_byteswap_info { 670 arc_byteswap_func_t *ob_func; 671 char *ob_name; 672 } dmu_object_byteswap_info_t; 673 674 extern const dmu_object_type_info_t dmu_ot[DMU_OT_NUMTYPES]; 675 extern const dmu_object_byteswap_info_t dmu_ot_byteswap[DMU_BSWAP_NUMFUNCS]; 676 677 /* 678 * Get information on a DMU object. 679 * 680 * Return 0 on success or ENOENT if object is not allocated. 681 * 682 * If doi is NULL, just indicates whether the object exists. 683 */ 684 int dmu_object_info(objset_t *os, uint64_t object, dmu_object_info_t *doi); 685 /* Like dmu_object_info, but faster if you have a held dnode in hand. */ 686 void dmu_object_info_from_dnode(struct dnode *dn, dmu_object_info_t *doi); 687 /* Like dmu_object_info, but faster if you have a held dbuf in hand. */ 688 void dmu_object_info_from_db(dmu_buf_t *db, dmu_object_info_t *doi); 689 /* 690 * Like dmu_object_info_from_db, but faster still when you only care about 691 * the size. This is specifically optimized for zfs_getattr(). 692 */ 693 void dmu_object_size_from_db(dmu_buf_t *db, uint32_t *blksize, 694 u_longlong_t *nblk512); 695 696 typedef struct dmu_objset_stats { 697 uint64_t dds_num_clones; /* number of clones of this */ 698 uint64_t dds_creation_txg; 699 uint64_t dds_guid; 700 dmu_objset_type_t dds_type; 701 uint8_t dds_is_snapshot; 702 uint8_t dds_inconsistent; 703 char dds_origin[MAXNAMELEN]; 704 } dmu_objset_stats_t; 705 706 /* 707 * Get stats on a dataset. 708 */ 709 void dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat); 710 711 /* 712 * Add entries to the nvlist for all the objset's properties. See 713 * zfs_prop_table[] and zfs(1m) for details on the properties. 714 */ 715 void dmu_objset_stats(objset_t *os, struct nvlist *nv); 716 717 /* 718 * Get the space usage statistics for statvfs(). 719 * 720 * refdbytes is the amount of space "referenced" by this objset. 721 * availbytes is the amount of space available to this objset, taking 722 * into account quotas & reservations, assuming that no other objsets 723 * use the space first. These values correspond to the 'referenced' and 724 * 'available' properties, described in the zfs(1m) manpage. 725 * 726 * usedobjs and availobjs are the number of objects currently allocated, 727 * and available. 728 */ 729 void dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp, 730 uint64_t *usedobjsp, uint64_t *availobjsp); 731 732 /* 733 * The fsid_guid is a 56-bit ID that can change to avoid collisions. 734 * (Contrast with the ds_guid which is a 64-bit ID that will never 735 * change, so there is a small probability that it will collide.) 736 */ 737 uint64_t dmu_objset_fsid_guid(objset_t *os); 738 739 /* 740 * Get the [cm]time for an objset's snapshot dir 741 */ 742 timestruc_t dmu_objset_snap_cmtime(objset_t *os); 743 744 int dmu_objset_is_snapshot(objset_t *os); 745 746 extern struct spa *dmu_objset_spa(objset_t *os); 747 extern struct zilog *dmu_objset_zil(objset_t *os); 748 extern struct dsl_pool *dmu_objset_pool(objset_t *os); 749 extern struct dsl_dataset *dmu_objset_ds(objset_t *os); 750 extern void dmu_objset_name(objset_t *os, char *buf); 751 extern dmu_objset_type_t dmu_objset_type(objset_t *os); 752 extern uint64_t dmu_objset_id(objset_t *os); 753 extern zfs_sync_type_t dmu_objset_syncprop(objset_t *os); 754 extern zfs_logbias_op_t dmu_objset_logbias(objset_t *os); 755 extern int dmu_snapshot_list_next(objset_t *os, int namelen, char *name, 756 uint64_t *id, uint64_t *offp, boolean_t *case_conflict); 757 extern int dmu_snapshot_realname(objset_t *os, char *name, char *real, 758 int maxlen, boolean_t *conflict); 759 extern int dmu_dir_list_next(objset_t *os, int namelen, char *name, 760 uint64_t *idp, uint64_t *offp); 761 762 typedef int objset_used_cb_t(dmu_object_type_t bonustype, 763 void *bonus, uint64_t *userp, uint64_t *groupp); 764 extern void dmu_objset_register_type(dmu_objset_type_t ost, 765 objset_used_cb_t *cb); 766 extern void dmu_objset_set_user(objset_t *os, void *user_ptr); 767 extern void *dmu_objset_get_user(objset_t *os); 768 769 /* 770 * Return the txg number for the given assigned transaction. 771 */ 772 uint64_t dmu_tx_get_txg(dmu_tx_t *tx); 773 774 /* 775 * Synchronous write. 776 * If a parent zio is provided this function initiates a write on the 777 * provided buffer as a child of the parent zio. 778 * In the absence of a parent zio, the write is completed synchronously. 779 * At write completion, blk is filled with the bp of the written block. 780 * Note that while the data covered by this function will be on stable 781 * storage when the write completes this new data does not become a 782 * permanent part of the file until the associated transaction commits. 783 */ 784 785 /* 786 * {zfs,zvol,ztest}_get_done() args 787 */ 788 typedef struct zgd { 789 struct zilog *zgd_zilog; 790 struct blkptr *zgd_bp; 791 dmu_buf_t *zgd_db; 792 struct rl *zgd_rl; 793 void *zgd_private; 794 } zgd_t; 795 796 typedef void dmu_sync_cb_t(zgd_t *arg, int error); 797 int dmu_sync(struct zio *zio, uint64_t txg, dmu_sync_cb_t *done, zgd_t *zgd); 798 799 /* 800 * Find the next hole or data block in file starting at *off 801 * Return found offset in *off. Return ESRCH for end of file. 802 */ 803 int dmu_offset_next(objset_t *os, uint64_t object, boolean_t hole, 804 uint64_t *off); 805 806 /* 807 * Initial setup and final teardown. 808 */ 809 extern void dmu_init(void); 810 extern void dmu_fini(void); 811 812 typedef void (*dmu_traverse_cb_t)(objset_t *os, void *arg, struct blkptr *bp, 813 uint64_t object, uint64_t offset, int len); 814 void dmu_traverse_objset(objset_t *os, uint64_t txg_start, 815 dmu_traverse_cb_t cb, void *arg); 816 817 int dmu_diff(const char *tosnap_name, const char *fromsnap_name, 818 struct vnode *vp, offset_t *offp); 819 820 /* CRC64 table */ 821 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ 822 extern uint64_t zfs_crc64_table[256]; 823 824 extern int zfs_mdcomp_disable; 825 826 #ifdef __cplusplus 827 } 828 #endif 829 830 #endif /* _SYS_DMU_H */ 831