1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #pragma ident "%Z%%M% %I% %E% SMI" 27 28 /* 29 * SMB Locking library functions. 30 */ 31 32 #include <smbsrv/smb_incl.h> 33 #include <smbsrv/smb_fsops.h> 34 35 /* 36 * Oplock functionality enable/disable 37 */ 38 39 /* 40 * Magic 0xFF 'S' 'M' 'B' 41 * smb_com a byte, the "first" command 42 * Error a 4-byte union, ignored in a request 43 * smb_flg a one byte set of eight flags 44 * smb_flg2 a two byte set of 16 flags 45 * . twelve reserved bytes, have a role 46 * in connectionless transports (IPX, UDP?) 47 * smb_tid a 16-bit tree ID, a mount point sorta, 48 * 0xFFFF is this command does not have 49 * or require a tree context 50 * smb_pid a 16-bit process ID 51 * smb_uid a 16-bit user ID, specific to this "session" 52 * and mapped to a system (bona-fide) UID 53 * smb_mid a 16-bit multiplex ID, used to differentiate 54 * multiple simultaneous requests from the same 55 * process (pid) (ref RPC "xid") 56 * 57 * SMB_COM_LOCKING_ANDX allows both locking and/or unlocking of file range(s). 58 * 59 * Client Request Description 60 * ================================== ================================= 61 * 62 * UCHAR WordCount; Count of parameter words = 8 63 * UCHAR AndXCommand; Secondary (X) command; 0xFF = none 64 * UCHAR AndXReserved; Reserved (must be 0) 65 * USHORT AndXOffset; Offset to next command WordCount 66 * USHORT Fid; File handle 67 * UCHAR LockType; See LockType table below 68 * UCHAR OplockLevel; The new oplock level 69 * ULONG Timeout; Milliseconds to wait for unlock 70 * USHORT NumberOfUnlocks; Num. unlock range structs following 71 * USHORT NumberOfLocks; Num. lock range structs following 72 * USHORT ByteCount; Count of data bytes 73 * LOCKING_ANDX_RANGE Unlocks[]; Unlock ranges 74 * LOCKING_ANDX_RANGE Locks[]; Lock ranges 75 * 76 * LockType Flag Name Value Description 77 * ============================ ===== ================================ 78 * 79 * LOCKING_ANDX_SHARED_LOCK 0x01 Read-only lock 80 * LOCKING_ANDX_OPLOCK_RELEASE 0x02 Oplock break notification 81 * LOCKING_ANDX_CHANGE_LOCKTYPE 0x04 Change lock type 82 * LOCKING_ANDX_CANCEL_LOCK 0x08 Cancel outstanding request 83 * LOCKING_ANDX_LARGE_FILES 0x10 Large file locking format 84 * 85 * LOCKING_ANDX_RANGE Format 86 * ===================================================================== 87 * 88 * USHORT Pid; PID of process "owning" lock 89 * ULONG Offset; Offset to bytes to [un]lock 90 * ULONG Length; Number of bytes to [un]lock 91 * 92 * Large File LOCKING_ANDX_RANGE Format 93 * ===================================================================== 94 * 95 * USHORT Pid; PID of process "owning" lock 96 * USHORT Pad; Pad to DWORD align (mbz) 97 * ULONG OffsetHigh; Offset to bytes to [un]lock 98 * (high) 99 * ULONG OffsetLow; Offset to bytes to [un]lock (low) 100 * ULONG LengthHigh; Number of bytes to [un]lock 101 * (high) 102 * ULONG LengthLow; Number of bytes to [un]lock (low) 103 * 104 * Server Response Description 105 * ================================== ================================= 106 * 107 * UCHAR WordCount; Count of parameter words = 2 108 * UCHAR AndXCommand; Secondary (X) command; 0xFF = 109 * none 110 * UCHAR AndXReserved; Reserved (must be 0) 111 * USHORT AndXOffset; Offset to next command WordCount 112 * USHORT ByteCount; Count of data bytes = 0 113 * 114 */ 115 116 /* 117 * smb_oplock_acquire 118 * 119 * Attempt to acquire an oplock. Note that the oplock granted may be 120 * none, i.e. the oplock was not granted. 121 * 122 * Grant an oplock to the requestor if this session is the only one 123 * that has the file open, regardless of the number of instances of 124 * the file opened by this session. 125 * 126 * However, if there is no oplock on this file and there is already 127 * at least one open, we will not grant an oplock, even if the only 128 * existing opens are from the same client. This is "server discretion." 129 * 130 * An oplock may need to be broken in order for one to be granted, and 131 * depending on what action is taken by the other client (unlock or close), 132 * an oplock may or may not be granted. (The breaking of an oplock is 133 * done earlier in the calling path.) 134 * 135 * XXX: Node synchronization is not yet implemented. However, racing 136 * opens are handled thus: 137 * 138 * A racing oplock acquire can happen in the open path between 139 * smb_oplock_break() and smb_fsop_open(), but no later. (Once 140 * the file is open via smb_fsop_open()/VOP_OPEN, 141 * smb_fsop_oplock_install() will not be able to install an oplock, 142 * which requires an open count of 1.) 143 * 144 * Hence, we can safely break any oplock that came in after the 145 * smb_oplock_break() done previously in the open path, knowing that 146 * no other racing oplock acquisitions should be able to succeed 147 * because we already have the file open (see above). 148 * 149 * The type of oplock being requested is passed in op->my_flags. The result 150 * is also returned in op->my_flags. 151 * 152 * (Note that exclusive and batch oplocks are treated interchangeably.) 153 * 154 * The Returns NT status codes: 155 * NT_STATUS_SUCCESS 156 * NT_STATUS_CONNECTION_DISCONNECTED 157 */ 158 DWORD 159 smb_oplock_acquire( 160 smb_request_t *sr, 161 smb_ofile_t *of, 162 struct open_param *op) 163 { 164 smb_node_t *node; 165 unsigned int level; 166 167 ASSERT(sr); 168 ASSERT(of); 169 ASSERT(op); 170 ASSERT(op->fqi.last_attr.sa_vattr.va_type == VREG); 171 172 level = op->my_flags & MYF_OPLOCK_MASK; 173 174 op->my_flags &= ~MYF_OPLOCK_MASK; 175 176 if ((sr->sr_cfg->skc_oplock_enable == 0) || 177 (fsd_chkcap(&of->f_tree->t_fsd, FSOLF_DISABLE_OPLOCKS) > 0)) 178 return (NT_STATUS_SUCCESS); 179 180 if (!((MYF_IS_EXCLUSIVE_OPLOCK(level)) || 181 (MYF_IS_BATCH_OPLOCK(level)))) 182 return (NT_STATUS_SUCCESS); 183 184 node = of->f_node; 185 186 smb_rwx_rwenter(&node->n_lock, RW_WRITER); 187 188 if (EXCLUSIVE_OPLOCK_IN_FORCE(node) || 189 BATCH_OPLOCK_IN_FORCE(node)) { 190 191 smb_rwx_rwexit(&node->n_lock); 192 193 if (SMB_SAME_SESSION(sr->session, 194 node->n_oplock.op_ofile->f_session)) { 195 op->my_flags |= level; 196 return (NT_STATUS_SUCCESS); 197 } else if (SMB_ATTR_ONLY_OPEN(op)) { 198 ASSERT(!(op->my_flags & MYF_OPLOCK_MASK)); 199 return (NT_STATUS_SUCCESS); 200 } 201 202 smb_oplock_break(node); 203 204 smb_rwx_rwenter(&node->n_lock, RW_WRITER); 205 } 206 207 if (smb_fsop_oplock_install(node, of->f_mode) != 0) { 208 smb_rwx_rwexit(&node->n_lock); 209 return (NT_STATUS_SUCCESS); 210 } 211 212 node->n_oplock.op_ofile = of; 213 node->n_oplock.op_ipaddr = sr->session->ipaddr; 214 node->n_oplock.op_kid = sr->session->s_kid; 215 node->flags &= ~NODE_OPLOCKS_IN_FORCE; 216 217 if (MYF_IS_EXCLUSIVE_OPLOCK(level)) 218 node->flags |= NODE_EXCLUSIVE_OPLOCK; 219 220 if (MYF_IS_BATCH_OPLOCK(level)) 221 node->flags |= NODE_BATCH_OPLOCK; 222 223 op->my_flags |= level; 224 225 smb_rwx_rwexit(&node->n_lock); 226 227 return (NT_STATUS_SUCCESS); 228 } 229 230 /* 231 * smb_oplock_break 232 * 233 * The oplock break may succeed for multiple reasons: file close, oplock 234 * release, holder connection dropped, requesting client disconnect etc. 235 * Whatever the reason, the oplock should be broken when this function 236 * returns. The exceptions are when the client making this request gets 237 * disconnected or when another client is handling the break and it gets 238 * disconnected. 239 * 240 * Returns NT status codes: 241 * NT_STATUS_SUCCESS No oplock in force, i.e. the 242 * oplock has been broken. 243 * NT_STATUS_CONNECTION_DISCONNECTED Requesting client disconnected. 244 * NT_STATUS_INTERNAL_ERROR 245 */ 246 247 void 248 smb_oplock_break(smb_node_t *node) 249 { 250 smb_session_t *oplock_session; 251 smb_ofile_t *oplock_ofile; 252 struct mbuf_chain mbc; 253 int retries = 0; 254 clock_t elapsed_time; 255 clock_t max_time; 256 boolean_t flag; 257 258 smb_rwx_rwenter(&node->n_lock, RW_WRITER); 259 260 if (!OPLOCKS_IN_FORCE(node)) { 261 smb_rwx_rwexit(&node->n_lock); 262 return; 263 } 264 265 if (node->n_oplock.op_flags & OPLOCK_FLAG_BREAKING) { 266 elapsed_time = 0; 267 max_time = MSEC_TO_TICK(smb_oplock_timeout * OPLOCK_RETRIES); 268 /* 269 * Another client is already attempting to break the oplock. 270 * We wait for it to finish. If the caller was trying to 271 * acquire an oplock, he should retry in case the client's 272 * connection was dropped while trying to break the oplock. 273 * 274 * If the holder's connection has been dropped, we yield to 275 * allow the thread handling the break to detect it and set 276 * the flags. 277 */ 278 while ((node->n_oplock.op_flags & OPLOCK_FLAG_BREAKING) && 279 (elapsed_time < max_time)) { 280 clock_t timeleft; 281 282 timeleft = smb_rwx_rwwait(&node->n_lock, max_time); 283 if (timeleft == -1) { 284 elapsed_time = max_time; 285 } else { 286 elapsed_time += max_time - timeleft; 287 } 288 } 289 /* 290 * If there are no oplocks in force we're done. 291 */ 292 if (!OPLOCKS_IN_FORCE(node)) { 293 smb_rwx_rwexit(&node->n_lock); 294 return; 295 } else { 296 /* 297 * This is an anomalous condition. 298 * Cancel/release the oplock. 299 */ 300 smb_oplock_release(node, B_TRUE); 301 smb_rwx_rwexit(&node->n_lock); 302 return; 303 } 304 } 305 306 oplock_ofile = node->n_oplock.op_ofile; 307 ASSERT(oplock_ofile); 308 309 oplock_session = oplock_ofile->f_session; 310 ASSERT(oplock_session); 311 312 /* 313 * Start oplock break. 314 */ 315 316 node->n_oplock.op_flags |= OPLOCK_FLAG_BREAKING; 317 318 smb_rwx_rwexit(&node->n_lock); 319 320 max_time = MSEC_TO_TICK(smb_oplock_timeout); 321 do { 322 MBC_INIT(&mbc, MLEN); 323 (void) smb_encode_mbc(&mbc, "Mb19.wwwwbb3.ww10.", 324 SMB_COM_LOCKING_ANDX, oplock_ofile->f_tree->t_tid, 325 0xffff, 0, 0xffff, 8, 0xff, oplock_ofile->f_fid, 326 LOCKING_ANDX_OPLOCK_RELEASE); 327 328 flag = B_TRUE; 329 smb_rwx_rwenter(&oplock_session->s_lock, RW_WRITER); 330 while (flag) { 331 switch (oplock_session->s_state) { 332 case SMB_SESSION_STATE_DISCONNECTED: 333 case SMB_SESSION_STATE_TERMINATED: 334 smb_rwx_rwexit(&oplock_session->s_lock); 335 smb_rwx_rwenter(&node->n_lock, RW_WRITER); 336 337 node->flags &= ~NODE_OPLOCKS_IN_FORCE; 338 node->n_oplock.op_flags &= 339 ~OPLOCK_FLAG_BREAKING; 340 node->n_oplock.op_ofile = NULL; 341 node->n_oplock.op_ipaddr = 0; 342 node->n_oplock.op_kid = 0; 343 344 smb_rwx_rwexit(&node->n_lock); 345 346 return; 347 348 case SMB_SESSION_STATE_OPLOCK_BREAKING: 349 flag = B_FALSE; 350 break; 351 352 case SMB_SESSION_STATE_NEGOTIATED: 353 oplock_session->s_state = 354 SMB_SESSION_STATE_OPLOCK_BREAKING; 355 flag = B_FALSE; 356 break; 357 358 default: 359 (void) smb_rwx_rwwait(&oplock_session->s_lock, 360 -1); 361 break; 362 } 363 } 364 smb_rwx_rwexit(&oplock_session->s_lock); 365 366 (void) smb_session_send(oplock_session, 0, &mbc); 367 368 elapsed_time = 0; 369 370 smb_rwx_rwenter(&node->n_lock, RW_WRITER); 371 while ((node->n_oplock.op_flags & OPLOCK_FLAG_BREAKING) && 372 (elapsed_time < max_time)) { 373 clock_t timeleft; 374 375 timeleft = smb_rwx_rwwait(&node->n_lock, max_time); 376 if (timeleft == -1) { 377 elapsed_time = max_time; 378 } else { 379 elapsed_time += max_time - timeleft; 380 } 381 } 382 383 if (!OPLOCKS_IN_FORCE(node)) { 384 /* 385 * smb_oplock_release() was called 386 */ 387 smb_rwx_rwexit(&node->n_lock); 388 return; 389 } 390 } while (++retries < OPLOCK_RETRIES); 391 392 /* 393 * Retries exhausted and timed out. 394 * Cancel the oplock and continue. 395 */ 396 397 smb_oplock_release(node, B_TRUE); 398 399 smb_rwx_rwexit(&node->n_lock); 400 } 401 402 /* 403 * smb_oplock_release 404 * 405 * This function uninstalls the FEM oplock monitors and 406 * clears all flags in relation to an oplock on the 407 * given node. 408 * 409 * The function can be called with the node->n_lock held 410 * or not held. 411 */ 412 413 void /*ARGSUSED*/ 414 smb_oplock_release(smb_node_t *node, boolean_t have_rwx) 415 { 416 if (!have_rwx) 417 smb_rwx_rwenter(&node->n_lock, RW_WRITER); 418 419 if (!OPLOCKS_IN_FORCE(node)) { 420 if (!have_rwx) 421 smb_rwx_rwexit(&node->n_lock); 422 return; 423 } 424 425 smb_fsop_oplock_uninstall(node); 426 427 node->flags &= ~NODE_OPLOCKS_IN_FORCE; 428 node->n_oplock.op_flags &= ~OPLOCK_FLAG_BREAKING; 429 node->n_oplock.op_ofile = NULL; 430 node->n_oplock.op_ipaddr = 0; 431 node->n_oplock.op_kid = 0; 432 433 if (!have_rwx) 434 smb_rwx_rwexit(&node->n_lock); 435 } 436 437 /* 438 * smb_oplock_conflict 439 * 440 * The two checks on "session" and "op" are primarily for the open path. 441 * Other CIFS functions may call smb_oplock_conflict() with a session 442 * pointer so as to do the session check. 443 */ 444 445 boolean_t 446 smb_oplock_conflict(smb_node_t *node, smb_session_t *session, 447 struct open_param *op) 448 { 449 smb_session_t *oplock_session; 450 smb_ofile_t *oplock_ofile; 451 452 smb_rwx_rwenter(&node->n_lock, RW_READER); 453 454 if (!OPLOCKS_IN_FORCE(node)) { 455 smb_rwx_rwexit(&node->n_lock); 456 return (B_FALSE); 457 } 458 459 oplock_ofile = node->n_oplock.op_ofile; 460 ASSERT(oplock_ofile); 461 462 oplock_session = oplock_ofile->f_session; 463 ASSERT(oplock_session); 464 465 if (SMB_SAME_SESSION(session, oplock_session)) { 466 smb_rwx_rwexit(&node->n_lock); 467 return (B_FALSE); 468 } 469 470 if (SMB_ATTR_ONLY_OPEN(op)) { 471 smb_rwx_rwexit(&node->n_lock); 472 return (B_FALSE); 473 } 474 475 smb_rwx_rwexit(&node->n_lock); 476 return (B_TRUE); 477 } 478