1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License, Version 1.0 only 6# (the "License"). You may not use this file except in compliance 7# with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23#ident "%Z%%M% %I% %E% SMI" 24# 25# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 26# Use is subject to license terms. 27# 28# Configuration variables for the runtime environment of the nightly 29# build script and other tools for construction and packaging of releases. 30# This script is sourced by 'nightly' and 'bldenv' to set up the environment 31# for the build. This example is suitable for building a gate, 32# which will contain the resulting packages and archives (builds of the gate 33# are done in children and then the resulting archives, packages, and proto 34# area are put into the parent for everyone to use). It is based off 35# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 36# DEBUG and non-DEBUG builds (-D) 37# creates cpio archives for bfu (-a) 38# creates packages for PIT/RE (-p) 39# checks for new interfaces in libraries (-A) 40# runs 'make check' (-C) 41# runs lint in usr/src (-l plus the LINTDIRS variable) 42# sends mail on completion (-m and the MAILTO variable) 43# updates the protolist in the parent for children to compare with (-u) 44# updates the proto area in the parent when done (-U) 45# checks for changes in ELF runpaths (-r) 46# checks for changes in unreferenced files (-f) 47# use dmake instead of pmake (-d) 48# 49NIGHTLY_OPTIONS="-aADClmpuUrfd"; export NIGHTLY_OPTIONS 50 51# This is a variable for the rest of the script - GATE doesn't matter to 52# nightly itself 53GATE=onnv-gate; export GATE 54 55# CODEMGR_WS - where is your workspace at (or what should nightly name it) 56# there is only one definition here, which assumes all the gate build machines 57# (sparc and x86) are set up the same. But remember, this is a script, so 58# you _could_ look at $MACH or `uname -n` and set these variables differently. 59CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 60 61# PARENT_WS is used to determine the parent of this workspace. This is 62# for the options that deal with the parent workspace (such as where the 63# proto area will go). 64PARENT_WS="/ws/$GATE"; export PARENT_WS 65 66# CLONE_WS is the workspace nightly should do a bringover from. Since it's 67# going to bringover usr/src, this could take a while, so we use the 68# clone instead of the gate (see the gate's README). 69CLONE_WS="/ws/onnv-clone"; export CLONE_WS 70 71# The bringover, if any, is done as STAFFER. 72# Set STAFFER to your own login as gatekeeper or integration engineer. 73# The point is to use group "staff" and avoid referencing the parent 74# workspace as root. 75# Some scripts optionally send mail messages to MAILTO. 76# 77STAFFER=nobody; export STAFFER 78MAILTO=$STAFFER; export MAILTO 79 80# The project (see project(4)) under which to run this build. If not 81# specified, the build is simply run in a new task in the current project. 82BUILD_PROJECT=; export BUILD_PROJECT 83 84# You should not need to change the next four lines 85LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 86ATLOG="$CODEMGR_WS/log"; export ATLOG 87LOGFILE="$ATLOG/nightly.log"; export LOGFILE 88MACH=`uname -p`; export MACH 89 90# REF_PROTO_LIST - for comparing the list of stuff in your proto area 91# with. Generally this should be left alone, since you want to see differences 92# between todays build and yesterdays. 93# 94REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 95 96# where cpio archives of the OS are placed. Usually this should be left 97# alone too. Here they don't go in the build workspace, but in the parent. 98# Since this is done as root, the build machine needs root acces to 99# the parent over NFS. 100CPIODIR="${PARENT_WS}/archives/${MACH}/nightly"; export CPIODIR 101 102# 103# build environment variables, including version info for mcs, motd, 104# motd, uname and boot messages. Mostly you shouldn't change this except 105# when the release slips (nah) or when starting a new release. 106# 107ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 108SRC="$CODEMGR_WS/usr/src"; export SRC 109VERSION="$GATE"; export VERSION 110 111# the source product has no SCCS history, and is modified to remove source 112# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then 113# modified with 'make EXPORT_SRC'. 114EXPORT_SRC="$CODEMGR_WS/export_src"; export EXPORT_SRC 115 116# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in 117# xmod/cry_files are saved. They are dropped on the exportable source to create 118# the domestic build. 119CRYPT_SRC="$CODEMGR_WS/crypt_src"; export CRYPT_SRC 120 121# 122# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 123# there might be special reasons to override them here, but that 124# should not be the case in general 125# 126# RELEASE="5.10.1"; export RELEASE 127# RELEASE_DATE="October 2007"; export RELEASE_DATE 128 129# proto area in parent for optionally depositing a copy of headers and 130# libraries corresponding to the protolibs target 131# 132PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 133 134# 135# package creation variable. This put the packages in the parent. 136# 137PKGARCHIVE="${PARENT_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 138 139# we want make to do as much as it can, just in case there's more than 140# one problem. This is especially important with the gate, since multiple 141# unrelated broken things can be integrated. 142MAKEFLAGS=k; export MAKEFLAGS 143 144# Magic variable to prevent the devpro compilers/teamware from sending 145# mail back to devpro on every use. 146UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 147 148# Build tools - don't set these unless you know what you're doing. These 149# variables allows you to get the compilers and onbld files locally or 150# through cachefs. Set BUILD_TOOLS to pull everything from one location. 151# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 152# SUNWonbld and SPRO_ROOT to where you keep the compilers. 153# 154#BUILD_TOOLS=/opt; export BUILD_TOOLS 155#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 156#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 157 158# This goes along with lint - it is a series of the form "A [y|n]" which 159# means "go to directory A and run 'make lint'" Then mail me (y) the 160# difference in the lint output. 'y' should only be used if the area you're 161# linting is actually lint clean or you'll get lots of mail. 162# You shouldn't need to change this though. 163#LINTDIRS="$SRC y"; export LINTDIRS 164 165# 166# NT server for realmode builds 167# 168#NTSERVER=<hostname>; export NTSERVER 169 170# 171# Reference to IA32 IHV workspace, proto area and packages 172# 173#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 174#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 175#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 176 177# 178# Reference to binary-only IA32 IHV packages (for boot floppy construction) 179# 180#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin 181#export IA32_IHV_BINARY_PKGS 182 183# 184# Boot floppy proto area 185# 186#DCB_ROOT="${CODEMGR_WS}/proto/root_dcb_${MACH}" 187#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}" 188#export DCB_ROOT 189#export BOOTFLOPPY_ROOT 190 191# 192# Destination for sparc realmode package SUNWrmodu 193# 194#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 195#export SPARC_RM_PKGARCHIVE 196 197# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY 198# To compare the list of stuff in your DCB and BootFloppy proto areas 199# against. Generally this should be left alone, since you want to see 200# differences between todays build and yesterdays. 201# 202#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH} 203#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH} 204#export REF_PROTO_LIST_DCB 205#export REF_PROTO_LIST_BOOTFLOPPY 206 207# Set this flag to 'n' to disable the automatic validation of the dmake 208# version in use. The default is to check it. 209#CHECK_DMAKE=y 210 211# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 212# if the 'N' option is not specified, is to run this test. 213#CHECK_PATHS=y 214 215# Set this flag to 'y' to enable the use of elfsigncmp to validate the 216# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 217# The default is to not verify them. 218#VERIFY_ELFSIGN=n 219