1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21 22# 23# Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# ident "%Z%%M% %I% %E% SMI" 27# 28 29# Configuration variables for the runtime environment of the nightly 30# build script and other tools for construction and packaging of releases. 31# This script is sourced by 'nightly' and 'bldenv' to set up the environment 32# for the build. This example is suitable for building a developers workspace, 33# which will contain the resulting packages and archives. It is based off 34# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 35# creates cpio archives for bfu (-a) 36# runs 'make check' (-C) 37# DEBUG and non-DEBUG builds (-D) 38# runs lint in usr/src (-l plus the LINTDIRS variable) 39# sends mail on completion (-m and the MAILTO variable) 40# creates packages for PIT/RE (-p) 41# checks for changes in ELF runpaths (-r) 42# 43NIGHTLY_OPTIONS="-aCDlmpr"; export NIGHTLY_OPTIONS 44 45# This is a variable for the rest of the script - GATE doesn't matter to 46# nightly itself 47GATE=onnv-bugfixes; export GATE 48 49# CODEMGR_WS - where is your workspace at (or what should nightly name it) 50CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 51 52# PARENT_WS is used to determine the parent of this workspace. This is 53# for the options that deal with the parent workspace (such as where the 54# proto area will go). 55PARENT_WS="/ws/onnv-gate"; export PARENT_WS 56 57# CLONE_WS is the workspace nightly should do a bringover from. Since it's 58# going to bringover usr/src, this could take a while, so we use the 59# clone instead of the gate (see the gate's README). 60CLONE_WS="/ws/onnv-clone"; export CLONE_WS 61 62# This flag controls whether to build the closed source. If 63# undefined, nightly(1) and bldenv(1) will set it according to whether 64# the closed source tree is present. CLOSED_IS_PRESENT="no" means not 65# building the closed sources. 66# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 67 68# The bringover, if any, is done as STAFFER. 69# Set STAFFER to your own login as gatekeeper or developer 70# The point is to use group "staff" and avoid referencing the parent 71# workspace as root. 72# Some scripts optionally send mail messages to MAILTO. 73# 74STAFFER=nobody; export STAFFER 75MAILTO=$STAFFER; export MAILTO 76 77# The project (see project(4)) under which to run this build. If not 78# specified, the build is simply run in a new task in the current project. 79BUILD_PROJECT=; export BUILD_PROJECT 80 81# You should not need to change the next four lines 82LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 83ATLOG="$CODEMGR_WS/log"; export ATLOG 84LOGFILE="$ATLOG/nightly.log"; export LOGFILE 85MACH=`uname -p`; export MACH 86 87# REF_PROTO_LIST - for comparing the list of stuff in your proto area 88# with. Generally this should be left alone, since you want to see differences 89# from your parent (the gate). 90# 91REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 92 93# where cpio archives of the OS are placed. Usually this should be left 94# alone too. 95CPIODIR="${CODEMGR_WS}/archives/${MACH}/nightly"; export CPIODIR 96 97# 98# build environment variables, including version info for mcs, motd, 99# motd, uname and boot messages. Mostly you shouldn't change this except 100# when the release slips (nah) or you move an environment file to a new 101# release 102# 103ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 104SRC="$CODEMGR_WS/usr/src"; export SRC 105VERSION="$GATE"; export VERSION 106 107# 108# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 109# there might be special reasons to override them here, but that 110# should not be the case in general 111# 112# RELEASE="5.10.1"; export RELEASE 113# RELEASE_DATE="October 2007"; export RELEASE_DATE 114 115# proto area in parent for optionally depositing a copy of headers and 116# libraries corresponding to the protolibs target 117# not applicable given the NIGHTLY_OPTIONS 118# 119PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 120 121# 122# package creation variable. you probably shouldn't change this either. 123# 124PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 125 126# we want make to do as much as it can, just in case there's more than 127# one problem. 128MAKEFLAGS=k; export MAKEFLAGS 129 130# Magic variable to prevent the devpro compilers/teamware from sending 131# mail back to devpro on every use. 132UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 133 134# Build tools - don't set these unless you know what you're doing. These 135# variables allows you to get the compilers and onbld files locally or 136# through cachefs. Set BUILD_TOOLS to pull everything from one location. 137# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 138# SUNWonbld and SPRO_ROOT to where you keep the compilers. 139# 140#BUILD_TOOLS=/opt; export BUILD_TOOLS 141#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 142#SPRO_ROOT=/opt/SUNWspro; export SPRO_ROOT 143 144# This goes along with lint - it is a series of the form "A [y|n]" which 145# means "go to directory A and run 'make lint'" Then mail me (y) the 146# difference in the lint output. 'y' should only be used if the area you're 147# linting is actually lint clean or you'll get lots of mail. 148# You shouldn't need to change this though. 149#LINTDIRS="$SRC y"; export LINTDIRS 150 151# 152# Reference to IA32 IHV workspace, proto area and packages 153# 154#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 155#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 156#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 157 158# 159# Reference to binary-only IA32 IHV packages 160# 161#IA32_IHV_BINARY_PKGS=/ws/${GATE}-ihv-bin 162#export IA32_IHV_BINARY_PKGS 163 164# 165# Destination for sparc realmode package SUNWrmodu 166# 167#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 168#export SPARC_RM_PKGARCHIVE 169 170# Set this flag to 'n' to disable the automatic validation of the dmake 171# version in use. The default is to check it. 172#CHECK_DMAKE=y 173 174# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 175# if the 'N' option is not specified, is to run this test. 176#CHECK_PATHS=y 177 178# Set this flag to 'y' to enable the use of elfsigncmp to validate the 179# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 180# The default is to not verify them. 181#VERIFY_ELFSIGN=n 182 183# BRINGOVER_FILES is the list of files nightly passes to bringover. 184# If not set the default is "usr", but it can be used for bringing 185# over deleted_files or other nifty directories. 186#BRINGOVER_FILES="usr deleted_files" 187 188# POST_NIGHTLY can be any command to be run at the end of nightly. See 189# nightly(1) for interactions between environment variables and this command. 190#POST_NIGHTLY= 191