1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License, Version 1.0 only 6# (the "License"). You may not use this file except in compliance 7# with the License. 8# 9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10# or http://www.opensolaris.org/os/licensing. 11# See the License for the specific language governing permissions 12# and limitations under the License. 13# 14# When distributing Covered Code, include this CDDL HEADER in each 15# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16# If applicable, add the following below this CDDL HEADER, with the 17# fields enclosed by brackets "[]" replaced with your own identifying 18# information: Portions Copyright [yyyy] [name of copyright owner] 19# 20# CDDL HEADER END 21# 22# 23#ident "%Z%%M% %I% %E% SMI" 24# 25# Copyright 2005 Sun Microsystems, Inc. All rights reserved. 26# Use is subject to license terms. 27# 28# Configuration variables for the runtime environment of the nightly 29# build script and other tools for construction and packaging of releases. 30# This script is sourced by 'nightly' and 'bldenv' to set up the environment 31# for the build. This example is suitable for building a developers workspace, 32# which will contain the resulting packages and archives. It is based off 33# the onnv release. It sets NIGHTLY_OPTIONS to make nightly do: 34# creates cpio archives for bfu (-a) 35# runs 'make check' (-C) 36# DEBUG and non-DEBUG builds (-D) 37# runs lint in usr/src (-l plus the LINTDIRS variable) 38# sends mail on completion (-m and the MAILTO variable) 39# creates packages for PIT/RE (-p) 40# checks for changes in ELF runpaths (-r) 41# use dmake instead of pmake (-d) 42# 43NIGHTLY_OPTIONS="-aCDlmprd"; export NIGHTLY_OPTIONS 44 45# This is a variable for the rest of the script - GATE doesn't matter to 46# nightly itself 47GATE=onnv-bugfixes; export GATE 48 49# CODEMGR_WS - where is your workspace at (or what should nightly name it) 50CODEMGR_WS="/builds/$GATE"; export CODEMGR_WS 51 52# PARENT_WS is used to determine the parent of this workspace. This is 53# for the options that deal with the parent workspace (such as where the 54# proto area will go). 55PARENT_WS="/ws/onnv-gate"; export PARENT_WS 56 57# CLONE_WS is the workspace nightly should do a bringover from. Since it's 58# going to bringover usr/src, this could take a while, so we use the 59# clone instead of the gate (see the gate's README). 60CLONE_WS="/ws/onnv-clone"; export CLONE_WS 61 62# This flag controls whether to build the closed source. If 63# undefined, nightly(1) and bldenv(1) will set it according to whether 64# the closed tree is present. 65# CLOSED_IS_PRESENT="yes"; export CLOSED_IS_PRESENT 66 67# The bringover, if any, is done as STAFFER. 68# Set STAFFER to your own login as gatekeeper or developer 69# The point is to use group "staff" and avoid referencing the parent 70# workspace as root. 71# Some scripts optionally send mail messages to MAILTO. 72# 73STAFFER=nobody; export STAFFER 74MAILTO=$STAFFER; export MAILTO 75 76# The project (see project(4)) under which to run this build. If not 77# specified, the build is simply run in a new task in the current project. 78BUILD_PROJECT=; export BUILD_PROJECT 79 80# You should not need to change the next four lines 81LOCKNAME="`basename $CODEMGR_WS`_nightly.lock"; export LOCKNAME 82ATLOG="$CODEMGR_WS/log"; export ATLOG 83LOGFILE="$ATLOG/nightly.log"; export LOGFILE 84MACH=`uname -p`; export MACH 85 86# REF_PROTO_LIST - for comparing the list of stuff in your proto area 87# with. Generally this should be left alone, since you want to see differences 88# from your parent (the gate). 89# 90REF_PROTO_LIST=$PARENT_WS/usr/src/proto_list_${MACH}; export REF_PROTO_LIST 91 92# where cpio archives of the OS are placed. Usually this should be left 93# alone too. 94CPIODIR="${CODEMGR_WS}/archives/${MACH}/nightly"; export CPIODIR 95 96# 97# build environment variables, including version info for mcs, motd, 98# motd, uname and boot messages. Mostly you shouldn't change this except 99# when the release slips (nah) or you move an environment file to a new 100# release 101# 102ROOT="$CODEMGR_WS/proto/root_${MACH}"; export ROOT 103SRC="$CODEMGR_WS/usr/src"; export SRC 104VERSION="$GATE"; export VERSION 105 106# the source product has no SCCS history, and is modified to remove source 107# that cannot be shipped. EXPORT_SRC is where the clear files are copied, then 108# modified with 'make EXPORT_SRC'. 109EXPORT_SRC="$CODEMGR_WS/export_src"; export EXPORT_SRC 110 111# CRYPT_SRC is similar to EXPORT_SRC, but after 'make CRYPT_SRC' the files in 112# xmod/cry_files are saved. They are dropped on the exportable source to create 113# the domestic build. 114CRYPT_SRC="$CODEMGR_WS/crypt_src"; export CRYPT_SRC 115 116# 117# the RELEASE and RELEASE_DATE variables are set in Makefile.master; 118# there might be special reasons to override them here, but that 119# should not be the case in general 120# 121# RELEASE="5.10.1"; export RELEASE 122# RELEASE_DATE="October 2007"; export RELEASE_DATE 123 124# proto area in parent for optionally depositing a copy of headers and 125# libraries corresponding to the protolibs target 126# not applicable given the NIGHTLY_OPTIONS 127# 128PARENT_ROOT=$PARENT_WS/proto/root_$MACH; export PARENT_ROOT 129 130# 131# package creation variable. you probably shouldn't change this either. 132# 133PKGARCHIVE="${CODEMGR_WS}/packages/${MACH}/nightly"; export PKGARCHIVE 134 135# we want make to do as much as it can, just in case there's more than 136# one problem. 137MAKEFLAGS=k; export MAKEFLAGS 138 139# Magic variable to prevent the devpro compilers/teamware from sending 140# mail back to devpro on every use. 141UT_NO_USAGE_TRACKING="1"; export UT_NO_USAGE_TRACKING 142 143# Build tools - don't set these unless you know what you're doing. These 144# variables allows you to get the compilers and onbld files locally or 145# through cachefs. Set BUILD_TOOLS to pull everything from one location. 146# Alternately, you can set ONBLD_TOOLS to where you keep the contents of 147# SUNWonbld and SPRO_ROOT to where you keep the compilers. 148# 149#BUILD_TOOLS=/opt; export BUILD_TOOLS 150#ONBLD_TOOLS=/opt/onbld; export ONBLD_TOOLS 151#SPRO_ROOT=/opt/SUNspro; export SPRO_ROOT 152 153# This goes along with lint - it is a series of the form "A [y|n]" which 154# means "go to directory A and run 'make lint'" Then mail me (y) the 155# difference in the lint output. 'y' should only be used if the area you're 156# linting is actually lint clean or you'll get lots of mail. 157# You shouldn't need to change this though. 158#LINTDIRS="$SRC y"; export LINTDIRS 159 160# 161# NT server for realmode builds 162# 163#NTSERVER=<hostname>; export NTSERVER 164 165# 166# Reference to IA32 IHV workspace, proto area and packages 167# 168#IA32_IHV_WS=/ws/${GATE}-ihv; export IA32_IHV_WS 169#IA32_IHV_ROOT=$IA32_IHV_WS/proto/root_i386; export IA32_IHV_ROOT 170#IA32_IHV_PKGS=$IA32_IHV_WS/packages/i386/nightly; export IA32_IHV_PKGS 171 172# 173# Reference to binary-only IA32 IHV packages (for boot floppy construction) 174# 175#IA32_IHV_BINARY_PKGS=/ws/${GATE}_ihv_bin 176#export IA32_IHV_BINARY_PKGS 177 178# 179# Boot floppy proto area 180# 181#DCB_ROOT="${CODEMGR_WS}/proto/root_dcb_${MACH}" 182#BOOTFLOPPY_ROOT="${CODEMGR_WS}/proto/root_BootFloppy_${MACH}" 183#export DCB_ROOT 184#export BOOTFLOPPY_ROOT 185 186# 187# Destination for sparc realmode package SUNWrmodu 188# 189#SPARC_RM_PKGARCHIVE="${CODEMGR_WS}/packages/sparc_realmode/nightly" 190#export SPARC_RM_PKGARCHIVE 191 192# REF_PROTO_LIST_DCB & REF_PROTO_LIST_BOOTFLOPPY 193# To compare the list of stuff in your DCB and BootFloppy proto areas 194# against. Generally this should be left alone, since you want to see 195# differences from your parent (the gate). 196# 197#REF_PROTO_LIST_DCB=$PARENT_WS/usr/src/realmode/proto_list_dcb_${MACH} 198#REF_PROTO_LIST_BOOTFLOPPY=$PARENT_WS/usr/src/realmode/proto_list_bootfloppy_${MACH} 199#export REF_PROTO_LIST_DCB 200#export REF_PROTO_LIST_BOOTFLOPPY 201 202# Set this flag to 'n' to disable the automatic validation of the dmake 203# version in use. The default is to check it. 204#CHECK_DMAKE=y 205 206# Set this flag to 'n' to disable the use of 'checkpaths'. The default, 207# if the 'N' option is not specified, is to run this test. 208#CHECK_PATHS=y 209 210# Set this flag to 'y' to enable the use of elfsigncmp to validate the 211# output of elfsign. Doing so requires that 't' be set in NIGHTLY_OPTIONS. 212# The default is to not verify them. 213#VERIFY_ELFSIGN=n 214 215# BRINGOVER_FILES is the list of files nightly passes to bringover. 216# If not set the default is "usr", but it can be used for bringing 217# over deleted_files or other nifty directories. 218#BRINGOVER_FILES="usr deleted_files" 219