1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# Copyright 2006 Sun Microsystems, Inc. All rights reserved. 23# Use is subject to license terms. 24# 25# ident "%Z%%M% %I% %E% SMI" 26# 27# lib/libc/sparcv9/Makefile 28# 29LIBCBASE=. 30 31LIBRARY= libc.a 32LIB_PIC= libc_pic.a 33VERS= .1 34CPP= /usr/lib/cpp 35TARGET_ARCH= sparc 36 37# objects are grouped by source directory 38 39# local objects 40STRETS= 41 42CRTOBJS= \ 43 __align_cpy_2.o \ 44 __align_cpy_4.o \ 45 __align_cpy_8.o \ 46 _ftou.o \ 47 cerror.o 48 49DYNOBJS= 50 51FPOBJS= \ 52 _D_cplx_div.o \ 53 _D_cplx_div_ix.o \ 54 _D_cplx_div_rx.o \ 55 _D_cplx_mul.o \ 56 _F_cplx_div.o \ 57 _F_cplx_div_ix.o \ 58 _F_cplx_div_rx.o \ 59 _F_cplx_mul.o \ 60 _Q_add.o \ 61 _Q_cmp.o \ 62 _Q_cmpe.o \ 63 _Q_cplx_div.o \ 64 _Q_cplx_div_ix.o \ 65 _Q_cplx_div_rx.o \ 66 _Q_cplx_lr_div.o \ 67 _Q_cplx_lr_div_ix.o \ 68 _Q_cplx_lr_div_rx.o \ 69 _Q_cplx_lr_mul.o \ 70 _Q_cplx_mul.o \ 71 _Q_div.o \ 72 _Q_dtoq.o \ 73 _Q_fcc.o \ 74 _Q_itoq.o \ 75 _Q_mul.o \ 76 _Q_neg.o \ 77 _Q_qtod.o \ 78 _Q_qtoi.o \ 79 _Q_qtos.o \ 80 _Q_qtou.o \ 81 _Q_scl.o \ 82 _Q_sqrt.o \ 83 _Q_stoq.o \ 84 _Q_sub.o \ 85 _Q_utoq.o 86 87FPOBJS64= \ 88 _Qp_qtox.o \ 89 _Qp_qtoux.o \ 90 _Qp_xtoq.o \ 91 _Qp_uxtoq.o \ 92 __dtoul.o \ 93 __ftoul.o 94 95FPASMOBJS= \ 96 _Q_get_rp_rd.o \ 97 __quad_mag64.o \ 98 fpgetmask.o \ 99 fpgetrnd.o \ 100 fpgetsticky.o \ 101 fpsetmask.o \ 102 fpsetrnd.o \ 103 fpsetsticky.o 104 105$(__GNUC)FPASMOBJS += \ 106 __quad.o 107 108ATOMICOBJS= \ 109 atomic.o 110 111COMOBJS= \ 112 bcmp.o \ 113 bcopy.o \ 114 bsearch.o \ 115 bzero.o \ 116 memccpy.o \ 117 qsort.o \ 118 strtol.o \ 119 strtoul.o 120 121GENOBJS= \ 122 _getsp.o \ 123 _xregs_clrptr.o \ 124 abs.o \ 125 alloca.o \ 126 cuexit.o \ 127 ecvt.o \ 128 getctxt.o \ 129 lexp10.o \ 130 llog10.o \ 131 lock.o \ 132 makectxt.o \ 133 memchr.o \ 134 memcmp.o \ 135 memcpy.o \ 136 memmove.o \ 137 memset.o \ 138 new_list.o \ 139 setjmp.o \ 140 siginfolst.o \ 141 siglongjmp.o \ 142 sparc_data.o \ 143 strcasecmp.o \ 144 strchr.o \ 145 strcmp.o \ 146 strcpy.o \ 147 strlcpy.o \ 148 strlen.o \ 149 strncmp.o \ 150 strncpy.o \ 151 swapctxt.o \ 152 sync_instruction_memory.o 153 154# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 155# This macro should ALWAYS be empty; native APIs are already 'large file'. 156COMSYSOBJS64= 157 158SYSOBJS64= 159 160COMSYSOBJS= \ 161 __clock_timer.o \ 162 __fcntl.o \ 163 __getloadavg.o \ 164 __rusagesys.o \ 165 __signotify.o \ 166 __sigrt.o \ 167 __time.o \ 168 _lgrp_home_fast.o \ 169 _lgrpsys.o \ 170 _nfssys.o \ 171 _portfs.o \ 172 _pset.o \ 173 _rename.o \ 174 _rpcsys.o \ 175 _sigaction.o \ 176 _so_accept.o \ 177 _so_bind.o \ 178 _so_connect.o \ 179 _so_getpeername.o \ 180 _so_getsockname.o \ 181 _so_getsockopt.o \ 182 _so_listen.o \ 183 _so_recv.o \ 184 _so_recvfrom.o \ 185 _so_recvmsg.o \ 186 _so_send.o \ 187 _so_sendmsg.o \ 188 _so_sendto.o \ 189 _so_setsockopt.o \ 190 _so_shutdown.o \ 191 _so_socket.o \ 192 _so_socketpair.o \ 193 _sockconfig.o \ 194 access.o \ 195 acct.o \ 196 acl.o \ 197 adjtime.o \ 198 alarm.o \ 199 brk.o \ 200 chdir.o \ 201 chmod.o \ 202 chown.o \ 203 chroot.o \ 204 cladm.o \ 205 close.o \ 206 creat.o \ 207 dup.o \ 208 execve.o \ 209 exit.o \ 210 facl.o \ 211 fchdir.o \ 212 fchmod.o \ 213 fchown.o \ 214 fchroot.o \ 215 fdsync.o \ 216 fpathconf.o \ 217 fstat.o \ 218 fstatfs.o \ 219 fstatvfs.o \ 220 getcpuid.o \ 221 getdents.o \ 222 getegid.o \ 223 geteuid.o \ 224 getgid.o \ 225 getgroups.o \ 226 gethrtime.o \ 227 getitimer.o \ 228 getmsg.o \ 229 getpagesizes.o \ 230 getpid.o \ 231 getpmsg.o \ 232 getppid.o \ 233 getrlimit.o \ 234 getuid.o \ 235 gtty.o \ 236 install_utrap.o \ 237 ioctl.o \ 238 kaio.o \ 239 kill.o \ 240 lchown.o \ 241 link.o \ 242 llseek.o \ 243 lseek.o \ 244 lstat.o \ 245 memcntl.o \ 246 mincore.o \ 247 mkdir.o \ 248 mknod.o \ 249 mmap.o \ 250 modctl.o \ 251 mount.o \ 252 mprotect.o \ 253 munmap.o \ 254 nice.o \ 255 ntp_adjtime.o \ 256 ntp_gettime.o \ 257 open.o \ 258 p_online.o \ 259 pathconf.o \ 260 pause.o \ 261 pcsample.o \ 262 pollsys.o \ 263 pread.o \ 264 priocntlset.o \ 265 processor_bind.o \ 266 processor_info.o \ 267 profil.o \ 268 putmsg.o \ 269 putpmsg.o \ 270 pwrite.o \ 271 read.o \ 272 readlink.o \ 273 readv.o \ 274 resolvepath.o \ 275 rmdir.o \ 276 seteguid.o \ 277 setgid.o \ 278 setgroups.o \ 279 setitimer.o \ 280 setreid.o \ 281 setrlimit.o \ 282 setuid.o \ 283 sigaltstk.o \ 284 sigprocmsk.o \ 285 sigsendset.o \ 286 sigsuspend.o \ 287 stat.o \ 288 statfs.o \ 289 statvfs.o \ 290 stty.o \ 291 symlink.o \ 292 sync.o \ 293 sysconfig.o \ 294 sysfs.o \ 295 sysinfo.o \ 296 syslwp.o \ 297 times.o \ 298 ulimit.o \ 299 umask.o \ 300 umount2.o \ 301 unlink.o \ 302 utime.o \ 303 utimes.o \ 304 utssys.o \ 305 vhangup.o \ 306 waitid.o \ 307 write.o \ 308 writev.o \ 309 yield.o 310 311SYSOBJS= \ 312 __clock_gettime.o \ 313 __getcontext.o \ 314 _lwp_mutex_unlock.o \ 315 _stack_grow.o \ 316 door.o \ 317 fork1.o \ 318 forkall.o \ 319 gettimeofday.o \ 320 pipe.o \ 321 sparc_utrap_install.o \ 322 syscall.o \ 323 syssun.o \ 324 tls_get_addr.o \ 325 uadmin.o \ 326 umount.o \ 327 uname.o \ 328 vfork.o 329 330# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 331# This macro should ALWAYS be empty; native APIs are already 'large file'. 332PORTGEN64= 333 334# objects from source under ../port 335PORTFP= \ 336 __flt_decim.o \ 337 __flt_rounds.o \ 338 __tbl_10_b.o \ 339 __tbl_10_h.o \ 340 __tbl_10_s.o \ 341 __tbl_2_b.o \ 342 __tbl_2_h.o \ 343 __tbl_2_s.o \ 344 __tbl_fdq.o \ 345 __tbl_tens.o \ 346 __x_power.o \ 347 _base_sup.o \ 348 aconvert.o \ 349 decimal_bin.o \ 350 double_decim.o \ 351 econvert.o \ 352 fconvert.o \ 353 file_decim.o \ 354 finite.o \ 355 fp_data.o \ 356 func_decim.o \ 357 gconvert.o \ 358 hex_bin.o \ 359 ieee_globals.o \ 360 pack_float.o \ 361 sigfpe.o \ 362 string_decim.o 363 364PORTGEN= \ 365 _env_data.o \ 366 _xftw.o \ 367 a64l.o \ 368 abort.o \ 369 addsev.o \ 370 assert.o \ 371 atof.o \ 372 atoi.o \ 373 atol.o \ 374 atoll.o \ 375 attropen.o \ 376 atexit.o \ 377 atfork.o \ 378 basename.o \ 379 calloc.o \ 380 catgets.o \ 381 catopen.o \ 382 cfgetispeed.o \ 383 cfgetospeed.o \ 384 cfree.o \ 385 cfsetispeed.o \ 386 cfsetospeed.o \ 387 cftime.o \ 388 clock.o \ 389 closedir.o \ 390 closefrom.o \ 391 confstr.o \ 392 crypt.o \ 393 csetlen.o \ 394 ctime.o \ 395 ctime_r.o \ 396 directio.o \ 397 dirname.o \ 398 div.o \ 399 drand48.o \ 400 dup2.o \ 401 env_data.o \ 402 errno.o \ 403 euclen.o \ 404 event_port.o \ 405 execvp.o \ 406 fattach.o \ 407 fdetach.o \ 408 fdopendir.o \ 409 ffs.o \ 410 fmtmsg.o \ 411 ftime.o \ 412 ftok.o \ 413 ftw.o \ 414 gcvt.o \ 415 getauxv.o \ 416 getcwd.o \ 417 getdate_err.o \ 418 getdtblsize.o \ 419 getenv.o \ 420 getexecname.o \ 421 getgrnam.o \ 422 getgrnam_r.o \ 423 gethostid.o \ 424 gethostname.o \ 425 gethz.o \ 426 getisax.o \ 427 getloadavg.o \ 428 getlogin.o \ 429 getmntent.o \ 430 getnetgrent.o \ 431 getopt.o \ 432 getopt_long.o \ 433 getpagesize.o \ 434 getpw.o \ 435 getpwnam.o \ 436 getpwnam_r.o \ 437 getrusage.o \ 438 getspent.o \ 439 getspent_r.o \ 440 getsubopt.o \ 441 gettxt.o \ 442 getusershell.o \ 443 getut.o \ 444 getutx.o \ 445 getvfsent.o \ 446 getwd.o \ 447 getwidth.o \ 448 getxby_door.o \ 449 gtxt.o \ 450 hsearch.o \ 451 iconv.o \ 452 imaxabs.o \ 453 imaxdiv.o \ 454 index.o \ 455 initgroups.o \ 456 insque.o \ 457 isaexec.o \ 458 isastream.o \ 459 isatty.o \ 460 killpg.o \ 461 l64a.o \ 462 lckpwdf.o \ 463 lconstants.o \ 464 ldivide.o \ 465 lfind.o \ 466 lfmt.o \ 467 lfmt_log.o \ 468 lldiv.o \ 469 lltostr.o \ 470 lmath.o \ 471 localtime.o \ 472 lsearch.o \ 473 madvise.o \ 474 malloc.o \ 475 memalign.o \ 476 mkdev.o \ 477 mkdtemp.o \ 478 mkfifo.o \ 479 mkstemp.o \ 480 mktemp.o \ 481 mlock.o \ 482 mlockall.o \ 483 mon.o \ 484 msync.o \ 485 munlock.o \ 486 munlockall.o \ 487 ndbm.o \ 488 nftw.o \ 489 nlspath_checks.o \ 490 nsparse.o \ 491 nss_common.o \ 492 nss_dbdefs.o \ 493 nss_deffinder.o \ 494 opendir.o \ 495 opt_data.o \ 496 perror.o \ 497 pfmt.o \ 498 pfmt_data.o \ 499 pfmt_print.o \ 500 plock.o \ 501 poll.o \ 502 priocntl.o \ 503 privlib.o \ 504 priv_str_xlate.o \ 505 psiginfo.o \ 506 psignal.o \ 507 pt.o \ 508 putpwent.o \ 509 putspent.o \ 510 raise.o \ 511 rand.o \ 512 random.o \ 513 rctlops.o \ 514 readdir.o \ 515 readdir_r.o \ 516 realpath.o \ 517 reboot.o \ 518 regexpr.o \ 519 rename.o \ 520 rewinddir.o \ 521 rindex.o \ 522 scandir.o \ 523 seekdir.o \ 524 select.o \ 525 setlabel.o \ 526 setpriority.o \ 527 settimeofday.o \ 528 sh_locks.o \ 529 sigflag.o \ 530 siglist.o \ 531 sigsend.o \ 532 sigsetops.o \ 533 ssignal.o \ 534 stack.o \ 535 str2sig.o \ 536 strcase_charmap.o \ 537 strcat.o \ 538 strcspn.o \ 539 strdup.o \ 540 strerror.o \ 541 strncat.o \ 542 strlcat.o \ 543 strncasecmp.o \ 544 strpbrk.o \ 545 strrchr.o \ 546 strsignal.o \ 547 strspn.o \ 548 strstr.o \ 549 strtod.o \ 550 strtoimax.o \ 551 strtok.o \ 552 strtok_r.o \ 553 strtoll.o \ 554 strtoull.o \ 555 strtoumax.o \ 556 swab.o \ 557 swapctl.o \ 558 sysconf.o \ 559 syslog.o \ 560 tcdrain.o \ 561 tcflow.o \ 562 tcflush.o \ 563 tcgetattr.o \ 564 tcgetpgrp.o \ 565 tcgetsid.o \ 566 tcsendbreak.o \ 567 tcsetattr.o \ 568 tcsetpgrp.o \ 569 tell.o \ 570 telldir.o \ 571 tfind.o \ 572 time_data.o \ 573 time_gdata.o \ 574 truncate.o \ 575 tsdalloc.o \ 576 tsearch.o \ 577 ttyname.o \ 578 ttyslot.o \ 579 ualarm.o \ 580 ucred.o \ 581 valloc.o \ 582 vlfmt.o \ 583 vpfmt.o \ 584 wait3.o \ 585 wait4.o \ 586 waitpid.o \ 587 walkstack.o \ 588 wdata.o \ 589 xgetwidth.o \ 590 xpg4.o \ 591 xpg6.o 592 593PORTPRINT_W= \ 594 doprnt_w.o 595 596PORTPRINT= \ 597 doprnt.o \ 598 fprintf.o \ 599 printf.o \ 600 snprintf.o \ 601 sprintf.o \ 602 vfprintf.o \ 603 vprintf.o \ 604 vsnprintf.o \ 605 vsprintf.o \ 606 vwprintf.o \ 607 wprintf.o 608 609# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 610# This macro should ALWAYS be empty; native APIs are already 'large file'. 611PORTSTDIO64= 612 613PORTSTDIO_W= \ 614 doscan_w.o 615 616PORTSTDIO= \ 617 __extensions.o \ 618 _endopen.o \ 619 _filbuf.o \ 620 _findbuf.o \ 621 _flsbuf.o \ 622 _wrtchk.o \ 623 clearerr.o \ 624 ctermid.o \ 625 ctermid_r.o \ 626 cuserid.o \ 627 data.o \ 628 doscan.o \ 629 fdopen.o \ 630 feof.o \ 631 ferror.o \ 632 fgetc.o \ 633 fgets.o \ 634 fileno.o \ 635 flockf.o \ 636 flush.o \ 637 fopen.o \ 638 fpos.o \ 639 fputc.o \ 640 fputs.o \ 641 fread.o \ 642 fseek.o \ 643 fseeko.o \ 644 ftell.o \ 645 ftello.o \ 646 fwrite.o \ 647 getc.o \ 648 getchar.o \ 649 getpass.o \ 650 gets.o \ 651 getw.o \ 652 popen.o \ 653 putc.o \ 654 putchar.o \ 655 puts.o \ 656 putw.o \ 657 rewind.o \ 658 scanf.o \ 659 setbuf.o \ 660 setbuffer.o \ 661 setvbuf.o \ 662 system.o \ 663 tempnam.o \ 664 tmpfile.o \ 665 tmpnam_r.o \ 666 ungetc.o \ 667 mse.o \ 668 vscanf.o \ 669 vwscanf.o \ 670 wscanf.o 671 672PORTI18N= \ 673 __fgetwc_xpg5.o \ 674 __fgetws_xpg5.o \ 675 __fputwc_xpg5.o \ 676 __fputws_xpg5.o \ 677 __ungetwc_xpg5.o \ 678 getwchar.o \ 679 putwchar.o \ 680 putws.o \ 681 strtows.o \ 682 wcstoimax.o \ 683 wcstol.o \ 684 wcstoul.o \ 685 wcswcs.o \ 686 wscasecmp.o \ 687 wscat.o \ 688 wschr.o \ 689 wscmp.o \ 690 wscpy.o \ 691 wscspn.o \ 692 wsdup.o \ 693 wslen.o \ 694 wsncasecmp.o \ 695 wsncat.o \ 696 wsncmp.o \ 697 wsncpy.o \ 698 wspbrk.o \ 699 wsprintf.o \ 700 wsrchr.o \ 701 wsscanf.o \ 702 wsspn.o \ 703 wstod.o \ 704 wstok.o \ 705 wstol.o \ 706 wstoll.o \ 707 wsxfrm.o \ 708 wmemchr.o \ 709 wmemcmp.o \ 710 wmemcpy.o \ 711 wmemmove.o \ 712 wmemset.o \ 713 wcsstr.o \ 714 gettext.o \ 715 gettext_real.o \ 716 gettext_util.o \ 717 gettext_gnu.o \ 718 plural_parser.o \ 719 wdresolve.o \ 720 _ctype.o \ 721 isascii.o \ 722 toascii.o 723 724PORTI18N_COND= \ 725 wcstol_longlong.o \ 726 wcstoul_longlong.o 727 728THREADSOBJS= \ 729 alloc.o \ 730 assfail.o \ 731 cancel.o \ 732 door_calls.o \ 733 pthr_attr.o \ 734 pthr_barrier.o \ 735 pthr_cond.o \ 736 pthr_mutex.o \ 737 pthr_rwlock.o \ 738 pthread.o \ 739 rtsched.o \ 740 rwlock.o \ 741 scalls.o \ 742 sema.o \ 743 sigaction.o \ 744 spawn.o \ 745 synch.o \ 746 tdb_agent.o \ 747 thr.o \ 748 thread_interface.o \ 749 tls.o \ 750 tsd.o 751 752THREADSMACHOBJS= \ 753 machdep.o 754 755THREADSASMOBJS= \ 756 asm_subr.o 757 758UNWINDMACHOBJS= \ 759 unwind.o 760 761UNWINDASMOBJS= \ 762 unwind_frame.o 763 764# Preserved solely to ease maintenance of 32-bit and 64-bit library builds 765# This macro should ALWAYS be empty; native APIs are already 'large file'. 766PORTSYS64= 767 768PORTSYS= \ 769 _autofssys.o \ 770 acctctl.o \ 771 bsd_signal.o \ 772 corectl.o \ 773 exacctsys.o \ 774 execl.o \ 775 execle.o \ 776 execv.o \ 777 fcntl.o \ 778 fsmisc.o \ 779 fstatat.o \ 780 fsync.o \ 781 getpeerucred.o \ 782 inst_sync.o \ 783 issetugid.o \ 784 libc_link.o \ 785 libc_open.o \ 786 lockf.o \ 787 lwp.o \ 788 lwp_cond.o \ 789 lwp_rwlock.o \ 790 lwp_sigmask.o \ 791 meminfosys.o \ 792 msgsys.o \ 793 nfssys.o \ 794 openat.o \ 795 pgrpsys.o \ 796 posix_sigwait.o \ 797 ppriv.o \ 798 psetsys.o \ 799 rctlsys.o \ 800 sbrk.o \ 801 semsys.o \ 802 set_errno.o \ 803 shmsys.o \ 804 siginterrupt.o \ 805 signal.o \ 806 sigpending.o \ 807 sigstack.o \ 808 tasksys.o \ 809 time.o \ 810 time_util.o \ 811 ucontext.o \ 812 ustat.o \ 813 zone.o 814 815PORTREGEX= \ 816 glob.o \ 817 regcmp.o \ 818 regex.o \ 819 wordexp.o 820 821MOSTOBJS= \ 822 $(STRETS) \ 823 $(CRTOBJS) \ 824 $(DYNOBJS) \ 825 $(FPOBJS) \ 826 $(FPOBJS64) \ 827 $(FPASMOBJS) \ 828 $(ATOMICOBJS) \ 829 $(COMOBJS) \ 830 $(GENOBJS) \ 831 $(PORTFP) \ 832 $(PORTGEN) \ 833 $(PORTGEN64) \ 834 $(PORTI18N) \ 835 $(PORTI18N_COND) \ 836 $(PORTPRINT) \ 837 $(PORTPRINT_W) \ 838 $(PORTREGEX) \ 839 $(PORTSTDIO) \ 840 $(PORTSTDIO64) \ 841 $(PORTSTDIO_W) \ 842 $(PORTSYS) \ 843 $(PORTSYS64) \ 844 $(THREADSOBJS) \ 845 $(THREADSMACHOBJS) \ 846 $(THREADSASMOBJS) \ 847 $(UNWINDMACHOBJS) \ 848 $(UNWINDASMOBJS) \ 849 $(COMSYSOBJS) \ 850 $(SYSOBJS) \ 851 $(COMSYSOBJS64) \ 852 $(SYSOBJS64) 853 854TRACEOBJS= \ 855 plockstat.o 856 857# NOTE: libc.so.1 must be linked with the minimal crti.o and crtn.o 858# modules whose source is provided in the $(SRC)/lib/common directory. 859# This must be done because otherwise the Sun C compiler would insert 860# its own versions of these modules and those versions contain code 861# to call out to C++ initialization functions. Such C++ initialization 862# functions can call back into libc before thread initialization is 863# complete and this leads to segmentation violations and other problems. 864# Since libc contains no C++ code, linking with the minimal crti.o and 865# crtn.o modules is safe and avoids the problems described above. 866OBJECTS= $(CRTI) $(MOSTOBJS) $(CRTN) 867CRTSRCS= ../../common/sparcv9 868 869# include common library definitions 870include ../../Makefile.lib 871include ../../Makefile.lib.64 872 873# NOTE: libc_i18n.a will be part of libc.so.1. Therefore, the compilation 874# conditions such as the settings of CFLAGS and CPPFLAGS for the libc_i18n stuff 875# need to be compatible with the ones for the libc stuff. Whenever the changes 876# that affect the compilation conditions of libc happened, those for libc_i18n 877# also need to be updated. 878 879CFLAGS64 += $(CCVERBOSE) 880 881# This is necessary to avoid problems with calling _ex_unwind(). 882# We probably don't want any inlining anyway. 883CFLAGS64 += -xinline= 884 885# Setting THREAD_DEBUG = -DTHREAD_DEBUG (make THREAD_DEBUG=-DTHREAD_DEBUG ...) 886# enables ASSERT() checking in the threads portion of the library. 887# This is automatically enabled for DEBUG builds, not for non-debug builds. 888THREAD_DEBUG = 889$(NOT_RELEASE_BUILD)THREAD_DEBUG = -DTHREAD_DEBUG 890 891CFLAGS64 += $(THREAD_DEBUG) 892 893ALTPICS= $(TRACEOBJS:%=pics/%) 894 895$(DYNLIB) := PICS += $(ROOTFS_LIBDIR64)/libc_i18n.a 896$(DYNLIB) := BUILD.SO = $(LD) -o $@ -G $(DYNFLAGS) $(PICS) $(ALTPICS) 897 898MAPDIR= ../spec/sparcv9 899MAPFILE= $(MAPDIR)/mapfile 900 901sparcv9_C_PICFLAGS= -K PIC 902CFLAGS64 += $(EXTN_CFLAGS) 903CPPFLAGS= -D_REENTRANT -Dsparc $(EXTN_CPPFLAGS) \ 904 -I$(LIBCBASE)/inc -I../inc $(CPPFLAGS.master) 905ASFLAGS= -K PIC -P -D__STDC__ -D_ASM -D__sparcv9 $(CPPFLAGS) \ 906 $(sparcv9_XARCH) 907 908# Inform the run-time linker about libc specialized initialization 909RTLDINFO = -z rtldinfo=tls_rtldinfo 910 911DYNFLAGS += -M $(MAPFILE) $(RTLDINFO) 912DYNFLAGS += $(EXTN_DYNFLAGS) 913 914BUILD.s= $(AS) $(ASFLAGS) $< -o $@ 915 916# Override this top level flag so the compiler builds in its native 917# C99 mode. This has been enabled to support the complex arithmetic 918# added to libc. 919C99MODE= $(C99_ENABLE) 920 921# libc method of building an archive 922BUILD.AR= $(RM) $@ ; \ 923 $(AR) q $@ `$(LORDER) $(MOSTOBJS:%=$(DIR)/%)| $(TSORT)` 924 925# extra files for the clean target 926CLEANFILES= \ 927 ../port/gen/errlst.c \ 928 ../port/gen/new_list.c \ 929 assym.h \ 930 genassym \ 931 pics/crti.o \ 932 pics/crtn.o \ 933 pics/values-Xa.o \ 934 $(ALTPICS) 935 936CLOBBERFILES += $(MAPFILE) $(LIB_PIC) 937 938# list of C source for lint 939SRCS= \ 940 $(ATOMICOBJS:%.o=$(SRC)/common/atomic/%.c) \ 941 $(COMOBJS:%.o=$(SRC)/common/util/%.c) \ 942 $(PORTFP:%.o=../port/fp/%.c) \ 943 $(PORTGEN:%.o=../port/gen/%.c) \ 944 $(PORTI18N:%.o=../port/i18n/%.c) \ 945 $(PORTPRINT:%.o=../port/print/%.c) \ 946 $(PORTREGEX:%.o=../port/regex/%.c) \ 947 $(PORTSTDIO:%.o=../port/stdio/%.c) \ 948 $(PORTSYS:%.o=../port/sys/%.c) \ 949 $(THREADSOBJS:%.o=../port/threads/%.c) \ 950 $(THREADSMACHOBJS:%.o=../$(MACH)/threads/%.c) \ 951 $(UNWINDMACHOBJS:%.o=../port/unwind/%.c) \ 952 $(FPOBJS:%.o=../$(MACH)/fp/%.c) \ 953 $(FPOBJS64:%.o=$(LIBCBASE)/fp/%.c) \ 954 $(LIBCBASE)/crt/_ftou.c \ 955 $(LIBCBASE)/gen/_xregs_clrptr.c \ 956 $(LIBCBASE)/gen/ecvt.c \ 957 $(LIBCBASE)/gen/getctxt.c \ 958 $(LIBCBASE)/gen/lexp10.c \ 959 $(LIBCBASE)/gen/llog10.c \ 960 $(LIBCBASE)/gen/makectxt.c \ 961 $(LIBCBASE)/gen/siginfolst.c \ 962 $(LIBCBASE)/gen/siglongjmp.c \ 963 $(LIBCBASE)/gen/swapctxt.c 964 965# conditional assignments 966# $(DYNLIB) $(LIB_PIC) := DYNOBJS = _rtbootld.o 967$(DYNLIB) := CRTI = crti.o values-Xa.o 968$(DYNLIB) := CRTN = crtn.o 969 970$(DYNLIB): $(MAPFILE) 971 972$(MAPFILE): 973 @cd $(MAPDIR); $(MAKE) mapfile 974 975# Files which need the threads .il inline template 976TIL= \ 977 alloc.o \ 978 assfail.o \ 979 atexit.o \ 980 atfork.o \ 981 cancel.o \ 982 door_calls.o \ 983 errno.o \ 984 getctxt.o \ 985 lwp.o \ 986 machdep.o \ 987 pthr_attr.o \ 988 pthr_barrier.o \ 989 pthr_cond.o \ 990 pthr_mutex.o \ 991 pthr_rwlock.o \ 992 pthread.o \ 993 rand.o \ 994 rtsched.o \ 995 rwlock.o \ 996 scalls.o \ 997 sema.o \ 998 sigaction.o \ 999 spawn.o \ 1000 stack.o \ 1001 swapctxt.o \ 1002 synch.o \ 1003 tdb_agent.o \ 1004 thr.o \ 1005 thread_interface.o \ 1006 tls.o \ 1007 tsd.o \ 1008 unwind.o 1009 1010$(TIL:%=pics/%) := CFLAGS64 += $(LIBCBASE)/threads/sparcv9.il 1011 1012# Files in fp, port/fp subdirectories that need base.il inline template 1013IL= \ 1014 __flt_decim.o \ 1015 decimal_bin.o 1016 1017$(IL:%=pics/%) := CFLAGS64 += $(LIBCBASE)/fp/base.il 1018 1019# Files in fp subdirectory which need __quad.il inline template 1020QIL= \ 1021 _Q_add.o \ 1022 _Q_cmp.o \ 1023 _Q_cmpe.o \ 1024 _Q_div.o \ 1025 _Q_dtoq.o \ 1026 _Q_fcc.o \ 1027 _Q_mul.o \ 1028 _Q_qtod.o \ 1029 _Q_qtoi.o \ 1030 _Q_qtos.o \ 1031 _Q_qtou.o \ 1032 _Q_sqrt.o \ 1033 _Q_stoq.o \ 1034 _Q_sub.o \ 1035 _Qp_qtox.o \ 1036 _Qp_qtoux.o 1037 1038$(QIL:%=pics/%) := CFLAGS64 += ../$(MACH)/fp/__quad.il 1039pics/_Qp%.o := CFLAGS64 += -I../$(MACH)/fp 1040pics/_Q%.o := sparcv9_COPTFLAG = -xO4 -xchip=ultra 1041 1042# Files in crt subdirectory which need muldiv64.il inline template 1043#CIL= mul64.o divrem64.o 1044#$(CIL:%=pics/%) := CFLAGS += $(LIBCBASE)/crt/mul64.il 1045 1046# large-file-aware components that should be built large 1047 1048#$(COMSYSOBJS64:%=pics/%) := \ 1049# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1050 1051#$(SYSOBJS64:%=pics/%) := \ 1052# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1053 1054#$(PORTGEN64:%=pics/%) := \ 1055# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1056 1057#$(PORTSTDIO64:%=pics/%) := \ 1058# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1059 1060#$(PORTSYS64:%=pics/%) := \ 1061# CPPFLAGS += -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 1062 1063$(PORTSTDIO_W:%=pics/%) := \ 1064 CPPFLAGS += -D_WIDE 1065 1066$(PORTPRINT_W:%=pics/%) := \ 1067 CPPFLAGS += -D_WIDE 1068 1069$(PORTI18N_COND:%=pics/%) := \ 1070 CPPFLAGS += -D_WCS_LONGLONG 1071 1072# Files which need extra optimization 1073pics/getenv.o := sparcv9_COPTFLAG = -xO4 1074 1075.KEEP_STATE: 1076 1077all: $(LIBS) $(LIB_PIC) 1078 1079lint := CPPFLAGS += -I../$(MACH)/fp 1080lint := CPPFLAGS += -D_MSE_INT_H -D_LCONV_C99 1081lint := LINTFLAGS64 += -mn 1082 1083lint: 1084 @echo $(LINT.c) ... $(LDLIBS) 1085 @$(LINT.c) $(SRCS) $(LDLIBS) 1086 1087# these aren't listed as $(PICS), so we need to force CTF 1088pics/values-Xa.o := CFLAGS64 += $(CTF_FLAGS) 1089pics/values-Xa.o := CTFCONVERT_POST = $(CTFCONVERT_O) 1090 1091$(LINTLIB):= SRCS=../port/llib-lc 1092$(LINTLIB):= CPPFLAGS += -D_MSE_INT_H 1093$(LINTLIB):= LINTFLAGS64=-nvx -Xarch=v9 1094 1095# object files that depend on inline template 1096$(TIL:%=pics/%): $(LIBCBASE)/threads/sparcv9.il 1097$(IL:%=pics/%): $(LIBCBASE)/fp/base.il 1098$(QIL:%=pics/%): ../$(MACH)/fp/__quad.il 1099#$(CIL:%=pics/%): $(LIBCBASE)/crt/muldiv64.il 1100 1101# include common libc targets 1102include ../Makefile.targ 1103 1104# We need to strip out all CTF and DOF data from the static library 1105$(LIB_PIC) := DIR = pics 1106$(LIB_PIC): pics $$(PICS) 1107 $(BUILD.AR) 1108 $(MCS) -d -n .SUNW_ctf $@ > /dev/null 2>&1 1109 $(MCS) -d -n .SUNW_dof $@ > /dev/null 2>&1 1110 $(AR) -ts $@ > /dev/null 1111 $(POST_PROCESS_A) 1112 1113# special cases 1114#$(STRETS:%=pics/%): crt/stret.s 1115# $(AS) $(ASFLAGS) -DSTRET$(@F:stret%.o=%) crt/stret.s -o $@ 1116# $(POST_PROCESS_O) 1117 1118#crt/_rtbootld.s: crt/_rtboot.s crt/_rtld.c 1119# $(CC) $(CPPFLAGS) -O -S -K pic crt/_rtld.c -o crt/_rtld.s 1120# $(CAT) crt/_rtboot.s crt/_rtld.s > $@ 1121# $(RM) crt/_rtld.s 1122 1123ASSYMDEP_OBJS= \ 1124 _lwp_mutex_unlock.o \ 1125 _stack_grow.o \ 1126 asm_subr.o \ 1127 tls_get_addr.o \ 1128 unwind_frame.o \ 1129 vfork.o 1130 1131$(ASSYMDEP_OBJS:%=pics/%) := CPPFLAGS += -I. 1132 1133$(ASSYMDEP_OBJS:%=pics/%): assym.h 1134 1135# assym.h build rules 1136 1137GENASSYM_C = ../$(MACH)/genassym.c 1138 1139# XXX A hack. Perhaps this should be 'CPPFLAGS.native' and 1140# live in Makefile.master 1141 1142CPPFLAGS.genassym = \ 1143 $(ENVCPPFLAGS1) $(ENVCPPFLAGS2) $(ENVCPPFLAGS3) $(ENVCPPFLAGS4) 1144 1145genassym: $(GENASSYM_C) 1146 $(NATIVECC) -I$(LIBCBASE)/inc -I../inc \ 1147 $(CPPFLAGS.genassym) -o $@ $(GENASSYM_C) 1148 1149OFFSETS = ../$(MACH)/offsets.in 1150 1151assym.h: $(OFFSETS) genassym 1152 $(OFFSETS_CREATE) <$(OFFSETS) >$@ 1153 ./genassym >>$@ 1154 1155# derived C source and related explicit dependencies 1156../port/gen/new_list.c: ../port/gen/errlist ../port/gen/errlist.awk 1157 cd ../port/gen; pwd; $(AWK) -f errlist.awk < errlist 1158 1159pics/new_list.o: ../port/gen/new_list.c 1160