1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _LIBTOPO_H 28 #define _LIBTOPO_H 29 30 #include <sys/nvpair.h> 31 #include <stdio.h> 32 33 #ifdef __cplusplus 34 extern "C" { 35 #endif 36 37 #define TOPO_VERSION 1 /* Library ABI Interface Version */ 38 39 typedef struct topo_hdl topo_hdl_t; 40 typedef struct topo_node tnode_t; 41 typedef struct topo_walk topo_walk_t; 42 typedef int32_t topo_instance_t; 43 typedef uint32_t topo_version_t; 44 45 typedef struct topo_list { 46 struct topo_list *l_prev; 47 struct topo_list *l_next; 48 } topo_list_t; 49 50 typedef struct topo_faclist { 51 topo_list_t tf_list; 52 tnode_t *tf_node; 53 } topo_faclist_t; 54 55 /* 56 * The following functions, error codes and data structures are private 57 * to libtopo snapshot consumers and enumerator modules. 58 */ 59 extern topo_hdl_t *topo_open(int, const char *, int *); 60 extern void topo_close(topo_hdl_t *); 61 extern char *topo_snap_hold(topo_hdl_t *, const char *, int *); 62 extern void topo_snap_release(topo_hdl_t *); 63 64 /* 65 * Snapshot walker support 66 */ 67 typedef int (*topo_walk_cb_t)(topo_hdl_t *, tnode_t *, void *); 68 69 extern topo_walk_t *topo_walk_init(topo_hdl_t *, const char *, topo_walk_cb_t, 70 void *, int *); 71 extern int topo_walk_step(topo_walk_t *, int); 72 extern void topo_walk_fini(topo_walk_t *); 73 74 /* 75 * Walk status returned from walker 76 */ 77 #define TOPO_WALK_ERR -1 78 #define TOPO_WALK_NEXT 0 79 #define TOPO_WALK_TERMINATE 1 80 81 /* 82 * Types of walks: depth-first (child) or breadth-first (sibling) 83 */ 84 #define TOPO_WALK_CHILD 0x0001 85 #define TOPO_WALK_SIBLING 0x0002 86 87 /* 88 * FMRI helper routines 89 */ 90 extern int topo_fmri_present(topo_hdl_t *, nvlist_t *, int *); 91 extern int topo_fmri_replaced(topo_hdl_t *, nvlist_t *, int *); 92 extern int topo_fmri_contains(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 93 extern int topo_fmri_expand(topo_hdl_t *, nvlist_t *, int *); 94 extern int topo_fmri_unusable(topo_hdl_t *, nvlist_t *, int *); 95 extern int topo_fmri_service_state(topo_hdl_t *, nvlist_t *, int *); 96 extern int topo_fmri_retire(topo_hdl_t *, nvlist_t *, int *); 97 extern int topo_fmri_unretire(topo_hdl_t *, nvlist_t *, int *); 98 extern int topo_fmri_nvl2str(topo_hdl_t *, nvlist_t *, char **, int *); 99 extern int topo_fmri_str2nvl(topo_hdl_t *, const char *, nvlist_t **, int *); 100 extern int topo_fmri_asru(topo_hdl_t *, nvlist_t *, nvlist_t **, int *); 101 extern int topo_fmri_fru(topo_hdl_t *, nvlist_t *, nvlist_t **, 102 int *); 103 extern int topo_fmri_label(topo_hdl_t *, nvlist_t *, char **, int *); 104 extern int topo_fmri_serial(topo_hdl_t *, nvlist_t *, char **, int *); 105 extern int topo_fmri_compare(topo_hdl_t *, nvlist_t *, nvlist_t *, int *); 106 extern int topo_fmri_facility(topo_hdl_t *, nvlist_t *, const char *, 107 uint32_t, topo_walk_cb_t, void *, int *); 108 109 /* 110 * Private utility functions for fmd 111 */ 112 extern ulong_t topo_fmri_strhash(topo_hdl_t *, const char *); 113 extern boolean_t topo_fmri_strcmp(topo_hdl_t *, const char *, const char *); 114 115 /* 116 * Topo node utilities: callable from topo_walk_step() callback or module 117 * enumeration, topo_mod_enumerate() 118 */ 119 extern char *topo_node_name(tnode_t *); 120 extern topo_instance_t topo_node_instance(tnode_t *); 121 extern tnode_t *topo_node_parent(tnode_t *); 122 extern void *topo_node_private(tnode_t *); 123 extern int topo_node_flags(tnode_t *); 124 extern int topo_node_asru(tnode_t *, nvlist_t **, nvlist_t *, int *); 125 extern int topo_node_fru(tnode_t *, nvlist_t **, nvlist_t *, int *); 126 extern int topo_node_resource(tnode_t *, nvlist_t **, int *); 127 extern int topo_node_label(tnode_t *, char **, int *); 128 extern tnode_t *topo_node_lookup(tnode_t *, const char *, topo_instance_t); 129 extern int topo_method_invoke(tnode_t *node, const char *, topo_version_t, 130 nvlist_t *, nvlist_t **, int *); 131 extern boolean_t topo_method_supported(tnode_t *, const char *, 132 topo_version_t); 133 extern int topo_node_facility(topo_hdl_t *, tnode_t *, const char *, 134 uint32_t, topo_faclist_t *, int *); 135 136 /* 137 * Node flags: denotes type of node 138 */ 139 #define TOPO_NODE_DEFAULT 0 140 #define TOPO_NODE_FACILITY 1 141 142 #define TOPO_FAC_TYPE_SENSOR "sensor" 143 #define TOPO_FAC_TYPE_INDICATOR "indicator" 144 145 /* 146 * Topo property get functions 147 */ 148 extern int topo_prop_get_int32(tnode_t *, const char *, const char *, 149 int32_t *, int *); 150 extern int topo_prop_get_uint32(tnode_t *, const char *, const char *, 151 uint32_t *, int *); 152 extern int topo_prop_get_int64(tnode_t *, const char *, const char *, 153 int64_t *, int *); 154 extern int topo_prop_get_uint64(tnode_t *, const char *, const char *, 155 uint64_t *, int *); 156 extern int topo_prop_get_double(tnode_t *, const char *, const char *, 157 double *, int *); 158 extern int topo_prop_get_string(tnode_t *, const char *, const char *, 159 char **, int *); 160 extern int topo_prop_get_fmri(tnode_t *, const char *, const char *, 161 nvlist_t **, int *); 162 extern int topo_prop_get_int32_array(tnode_t *, const char *, const char *, 163 int32_t **, uint_t *, int *); 164 extern int topo_prop_get_uint32_array(tnode_t *, const char *, const char *, 165 uint32_t **, uint_t *, int *); 166 extern int topo_prop_get_int64_array(tnode_t *, const char *, const char *, 167 int64_t **, uint_t *, int *); 168 extern int topo_prop_get_uint64_array(tnode_t *, const char *, const char *, 169 uint64_t **, uint_t *, int *); 170 extern int topo_prop_get_string_array(tnode_t *, const char *, const char *, 171 char ***, uint_t *, int *); 172 extern int topo_prop_get_fmri_array(tnode_t *, const char *, const char *, 173 nvlist_t ***, uint_t *, int *); 174 175 /* 176 * Topo property set functions 177 */ 178 extern int topo_prop_set_int32(tnode_t *, const char *, const char *, int, 179 int32_t, int *); 180 extern int topo_prop_set_uint32(tnode_t *, const char *, const char *, int, 181 uint32_t, int *); 182 extern int topo_prop_set_int64(tnode_t *, const char *, const char *, 183 int, int64_t, int *); 184 extern int topo_prop_set_uint64(tnode_t *, const char *, const char *, 185 int, uint64_t, int *); 186 extern int topo_prop_set_double(tnode_t *, const char *, const char *, 187 int, double, int *); 188 extern int topo_prop_set_string(tnode_t *, const char *, const char *, 189 int, const char *, int *); 190 extern int topo_prop_set_fmri(tnode_t *, const char *, const char *, 191 int, const nvlist_t *, int *); 192 extern int topo_prop_set_int32_array(tnode_t *, const char *, const char *, int, 193 int32_t *, uint_t, int *); 194 extern int topo_prop_set_uint32_array(tnode_t *, const char *, const char *, 195 int, uint32_t *, uint_t, int *); 196 extern int topo_prop_set_int64_array(tnode_t *, const char *, const char *, 197 int, int64_t *, uint_t, int *); 198 extern int topo_prop_set_uint64_array(tnode_t *, const char *, const char *, 199 int, uint64_t *, uint_t, int *); 200 extern int topo_prop_set_string_array(tnode_t *, const char *, const char *, 201 int, const char **, uint_t, int *); 202 extern int topo_prop_set_fmri_array(tnode_t *, const char *, const char *, 203 int, const nvlist_t **, uint_t, int *); 204 205 #define TOPO_PROP_IMMUTABLE 0 206 #define TOPO_PROP_MUTABLE 1 207 208 /* Protocol property group and property names */ 209 #define TOPO_PGROUP_PROTOCOL "protocol" /* Required property group */ 210 #define TOPO_PROP_RESOURCE "resource" /* resource FMRI */ 211 #define TOPO_PROP_ASRU "ASRU" /* ASRU FMRI */ 212 #define TOPO_PROP_FRU "FRU" /* FRU FMRI */ 213 #define TOPO_PROP_MOD "module" /* software module FMRI */ 214 #define TOPO_PROP_PKG "package" /* software package FMRI */ 215 #define TOPO_PROP_LABEL "label" /* property LABEL */ 216 217 #define TOPO_METH_FAC_ENUM "fac_enum" 218 219 /* 220 * System property group 221 */ 222 #define TOPO_PGROUP_SYSTEM "system" 223 #define TOPO_PROP_ISA "isa" 224 #define TOPO_PROP_MACHINE "machine" 225 226 /* 227 * These enum definitions are used to define a set of error tags associated with 228 * libtopo error conditions occuring during the adminstration of 229 * properties, invocation of methods and fmri-based queries. The shell script 230 * mkerror.sh is used to parse this file and create a corresponding topo_error.c 231 * source file. 232 * 233 * If you do something other than add a new error tag here, you may need to 234 * update the mkerror shell script as it is based upon simple regexps. 235 */ 236 typedef enum topo_prop_errno { 237 ETOPO_PROP_UNKNOWN = 3000, /* unknown topo prop error */ 238 ETOPO_PROP_NOENT, /* undefined property or property group */ 239 ETOPO_PROP_DEFD, /* static property already defined */ 240 ETOPO_PROP_NOMEM, /* memory limit exceeded during property allocation */ 241 ETOPO_PROP_TYPE, /* invalid property type */ 242 ETOPO_PROP_NAME, /* invalid property name */ 243 ETOPO_PROP_NOINHERIT, /* can not inherit property */ 244 ETOPO_PROP_NVL, /* malformed property nvlist */ 245 ETOPO_PROP_METHOD, /* get property method failed */ 246 ETOPO_PROP_END /* end of prop errno list (to ease auto-merge) */ 247 } topo_prop_errno_t; 248 249 typedef enum topo_method_errno { 250 ETOPO_METHOD_UNKNOWN = 3100, /* unknown topo method error */ 251 ETOPO_METHOD_INVAL, /* invalid method registration */ 252 ETOPO_METHOD_NOTSUP, /* method not supported */ 253 ETOPO_METHOD_FAIL, /* method failed */ 254 ETOPO_METHOD_VEROLD, /* app is compiled to use obsolete method */ 255 ETOPO_METHOD_VERNEW, /* app is compiled to use obsolete method */ 256 ETOPO_METHOD_NOMEM, /* memory limit exceeded during method op */ 257 ETOPO_METHOD_DEFD, /* method op already defined */ 258 ETOPO_METHOD_END /* end of method errno list */ 259 } topo_method_errno_t; 260 261 typedef enum topo_fmri_errno { 262 ETOPO_FMRI_UNKNOWN = 3200, /* unknown topo fmri error */ 263 ETOPO_FMRI_NVL, /* nvlist allocation failure for FMRI */ 264 ETOPO_FMRI_VERSION, /* invalid FMRI scheme version */ 265 ETOPO_FMRI_MALFORM, /* malformed FMRI */ 266 ETOPO_FMRI_NOMEM, /* memory limit exceeded */ 267 ETOPO_FMRI_END /* end of fmri errno list */ 268 } topo_fmri_errno_t; 269 270 typedef enum topo_hdl_errno { 271 ETOPO_HDL_UNKNOWN = 3300, /* unknown topo handle error */ 272 ETOPO_HDL_ABIVER, /* handle opened with invalid ABI version */ 273 ETOPO_HDL_SNAP, /* snapshot already taken */ 274 ETOPO_HDL_INVAL, /* invalid argument specified */ 275 ETOPO_HDL_UUID, /* uuid already set */ 276 ETOPO_HDL_NOMEM, /* memory limit exceeded */ 277 ETOPO_HDL_END /* end of handle errno list */ 278 } topo_hdl_errno_t; 279 280 extern const char *topo_strerror(int); 281 extern void topo_hdl_strfree(topo_hdl_t *, char *); 282 extern void topo_debug_set(topo_hdl_t *, const char *, const char *); 283 284 /* 285 * The following functions and data structures to support property 286 * observability are private to the fmtopo command. 287 */ 288 289 /* 290 * Each topology node advertises the name and data stability of each of its 291 * modules and properties. (see attributes(5)). 292 */ 293 294 /* 295 * Topo stability attributes 296 */ 297 typedef enum topo_stability { 298 TOPO_STABILITY_UNKNOWN = 0, /* private to libtopo */ 299 TOPO_STABILITY_INTERNAL, /* private to libtopo */ 300 TOPO_STABILITY_PRIVATE, /* private to Sun */ 301 TOPO_STABILITY_OBSOLETE, /* scheduled for removal */ 302 TOPO_STABILITY_EXTERNAL, /* not controlled by Sun */ 303 TOPO_STABILITY_UNSTABLE, /* new or rapidly changing */ 304 TOPO_STABILITY_EVOLVING, /* less rapidly changing */ 305 TOPO_STABILITY_STABLE, /* mature interface from Sun */ 306 TOPO_STABILITY_STANDARD /* industry standard */ 307 } topo_stability_t; 308 309 #define TOPO_STABILITY_MAX TOPO_STABILITY_STANDARD /* max valid stab */ 310 311 typedef struct topo_pgroup_info { 312 const char *tpi_name; /* property group name */ 313 topo_stability_t tpi_namestab; /* stability of group name */ 314 topo_stability_t tpi_datastab; /* stability of all property values */ 315 topo_version_t tpi_version; /* version of pgroup definition */ 316 } topo_pgroup_info_t; 317 318 extern topo_stability_t topo_name2stability(const char *); 319 extern const char *topo_stability2name(topo_stability_t); 320 extern void topo_pgroup_destroy(tnode_t *, const char *); 321 extern topo_pgroup_info_t *topo_pgroup_info(tnode_t *, const char *, int *); 322 323 typedef enum { 324 TOPO_TYPE_INVALID = 0, 325 TOPO_TYPE_BOOLEAN, /* boolean */ 326 TOPO_TYPE_INT32, /* int32_t */ 327 TOPO_TYPE_UINT32, /* uint32_t */ 328 TOPO_TYPE_INT64, /* int64_t */ 329 TOPO_TYPE_UINT64, /* uint64_t */ 330 TOPO_TYPE_STRING, /* const char* */ 331 TOPO_TYPE_TIME, /* uint64_t */ 332 TOPO_TYPE_SIZE, /* uint64_t */ 333 TOPO_TYPE_FMRI, /* nvlist_t */ 334 TOPO_TYPE_INT32_ARRAY, /* array of int32_t */ 335 TOPO_TYPE_UINT32_ARRAY, /* array of uint32_t */ 336 TOPO_TYPE_INT64_ARRAY, /* array of int64_t */ 337 TOPO_TYPE_UINT64_ARRAY, /* array of uint64_t */ 338 TOPO_TYPE_STRING_ARRAY, /* array of const char* */ 339 TOPO_TYPE_FMRI_ARRAY, /* array of nvlist_t */ 340 TOPO_TYPE_DOUBLE /* double */ 341 } topo_type_t; 342 343 extern nvlist_t *topo_prop_getprops(tnode_t *, int *err); 344 extern int topo_prop_getprop(tnode_t *, const char *, const char *, 345 nvlist_t *, nvlist_t **, int *); 346 extern int topo_prop_getpgrp(tnode_t *, const char *, nvlist_t **, int *); 347 extern int topo_prop_setprop(tnode_t *, const char *, nvlist_t *, 348 int, nvlist_t *, int *); 349 extern int topo_fmri_getprop(topo_hdl_t *, nvlist_t *, const char *, 350 const char *, nvlist_t *, nvlist_t **, int *); 351 extern int topo_fmri_getpgrp(topo_hdl_t *, nvlist_t *, const char *, 352 nvlist_t **, int *); 353 extern int topo_fmri_setprop(topo_hdl_t *, nvlist_t *, const char *, 354 nvlist_t *, int, nvlist_t *, int *); 355 356 /* Property node NVL names used in topo_prop_getprops */ 357 #define TOPO_PROP_GROUP "property-group" 358 #define TOPO_PROP_GROUP_NAME "property-group-name" 359 #define TOPO_PROP_GROUP_DSTAB "property-group-data-stability" 360 #define TOPO_PROP_GROUP_NSTAB "property-group-name-stability" 361 #define TOPO_PROP_GROUP_VERSION "property-group-version" 362 #define TOPO_PROP_VAL "property" 363 #define TOPO_PROP_VAL_NAME "property-name" 364 #define TOPO_PROP_VAL_VAL "property-value" 365 #define TOPO_PROP_VAL_TYPE "property-type" 366 #define TOPO_PROP_FLAG "property-flag" 367 368 /* 369 * ARGS list used in topo property methods 370 */ 371 #define TOPO_PROP_ARGS "args" 372 #define TOPO_PROP_PARGS "private-args" 373 374 extern int topo_xml_print(topo_hdl_t *, FILE *, const char *scheme, int *); 375 376 extern void *topo_hdl_alloc(topo_hdl_t *, size_t); 377 extern void *topo_hdl_zalloc(topo_hdl_t *, size_t); 378 extern void topo_hdl_free(topo_hdl_t *, void *, size_t); 379 extern int topo_hdl_nvalloc(topo_hdl_t *, nvlist_t **, uint_t); 380 extern int topo_hdl_nvdup(topo_hdl_t *, nvlist_t *, nvlist_t **); 381 extern char *topo_hdl_strdup(topo_hdl_t *, const char *); 382 383 /* 384 * Interfaces for converting sensor/indicator types, units, states, etc to 385 * a string 386 */ 387 void topo_sensor_type_name(uint32_t type, char *buf, size_t len); 388 void topo_sensor_units_name(uint8_t type, char *buf, size_t len); 389 void topo_led_type_name(uint8_t type, char *buf, size_t len); 390 void topo_led_state_name(uint8_t type, char *buf, size_t len); 391 void topo_sensor_state_name(uint32_t sensor_type, uint8_t state, char *buf, 392 size_t len); 393 394 /* 395 * Defines for standard properties for sensors and indicators 396 */ 397 #define TOPO_PGROUP_FACILITY "facility" 398 399 #define TOPO_SENSOR_READING "reading" 400 #define TOPO_SENSOR_STATE "state" 401 #define TOPO_SENSOR_CLASS "sensor-class" 402 #define TOPO_FACILITY_TYPE "type" 403 #define TOPO_SENSOR_UNITS "units" 404 #define TOPO_LED_MODE "mode" 405 406 /* 407 * Sensor Classes 408 * 409 * The "sensor-class" property in the "facility" propgroup on 410 * facility nodes of type "sensor" should be set to one of these 411 * two values. 412 * 413 * Threshold sensors provide an analog sensor reading via the 414 * "reading" property in the facility propgroup. They will also 415 * provide one or more discrete states via the "state" property 416 * in the facility propgroup. 417 * 418 * Discrete sensors will not provide an analog reading by will 419 * provide one or more discrete states via the "state" property 420 * in the facility propgroup. 421 */ 422 #define TOPO_SENSOR_CLASS_THRESHOLD "threshold" 423 #define TOPO_SENSOR_CLASS_DISCRETE "discrete" 424 425 /* 426 * Sensor unit types. We're using the unit types and corresponding 427 * codes described in the IPMI 2.0 spec as a reference as it seems to be a 428 * reasonably comprehensive list. This also simplifies the IPMI provider code 429 * since the unit type codes will map exactly to what libtopo uses (so no 430 * conversion necessary). 431 */ 432 typedef enum topo_sensor_unit { 433 TOPO_SENSOR_UNITS_UNSPECIFIED = 0, 434 TOPO_SENSOR_UNITS_DEGREES_C, 435 TOPO_SENSOR_UNITS_DEGREES_F, 436 TOPO_SENSOR_UNITS_DEGREES_K, 437 TOPO_SENSOR_UNITS_VOLTS, 438 TOPO_SENSOR_UNITS_AMPS, 439 TOPO_SENSOR_UNITS_WATTS, 440 TOPO_SENSOR_UNITS_JOULES, 441 TOPO_SENSOR_UNITS_COULOMBS, 442 TOPO_SENSOR_UNITS_VA, 443 TOPO_SENSOR_UNITS_NITS, 444 TOPO_SENSOR_UNITS_LUMEN, 445 TOPO_SENSOR_UNITS_LUX, 446 TOPO_SENSOR_UNITS_CANDELA, 447 TOPO_SENSOR_UNITS_KPA, 448 TOPO_SENSOR_UNITS_PSI, 449 450 TOPO_SENSOR_UNITS_NEWTON, 451 TOPO_SENSOR_UNITS_CFM, 452 TOPO_SENSOR_UNITS_RPM, 453 TOPO_SENSOR_UNITS_HZ, 454 TOPO_SENSOR_UNITS_MICROSEC, 455 TOPO_SENSOR_UNITS_MILLISEC, 456 TOPO_SENSOR_UNITS_SECS, 457 TOPO_SENSOR_UNITS_MIN, 458 TOPO_SENSOR_UNITS_HOUR, 459 TOPO_SENSOR_UNITS_DAY, 460 TOPO_SENSOR_UNITS_WEEK, 461 TOPO_SENSOR_UNITS_MIL, 462 TOPO_SENSOR_UNITS_INCHES, 463 TOPO_SENSOR_UNITS_FEET, 464 TOPO_SENSOR_UNITS_CUB_INCH, 465 TOPO_SENSOR_UNITS_CUB_FEET, 466 467 TOPO_SENSOR_UNITS_MM, 468 TOPO_SENSOR_UNITS_CM, 469 TOPO_SENSOR_UNITS_METERS, 470 TOPO_SENSOR_UNITS_CUB_CM, 471 TOPO_SENSOR_UNITS_CUB_METER, 472 TOPO_SENSOR_UNITS_LITERS, 473 TOPO_SENSOR_UNITS_FLUID_OUNCE, 474 TOPO_SENSOR_UNITS_RADIANS, 475 TOPO_SENSOR_UNITS_STERADIANS, 476 TOPO_SENSOR_UNITS_REVOLUTIONS, 477 TOPO_SENSOR_UNITS_CYCLES, 478 TOPO_SENSOR_UNITS_GRAVITIES, 479 TOPO_SENSOR_UNITS_OUNCE, 480 TOPO_SENSOR_UNITS_POUND, 481 TOPO_SENSOR_UNITS_FOOT_POUND, 482 TOPO_SENSOR_UNITS_OZ_INCH, 483 484 TOPO_SENSOR_UNITS_GAUSS, 485 TOPO_SENSOR_UNITS_GILBERTS, 486 TOPO_SENSOR_UNITS_HENRY, 487 TOPO_SENSOR_UNITS_MILHENRY, 488 TOPO_SENSOR_UNITS_FARAD, 489 TOPO_SENSOR_UNITS_MICROFARAD, 490 TOPO_SENSOR_UNITS_OHMS, 491 TOPO_SENSOR_UNITS_SIEMENS, 492 TOPO_SENSOR_UNITS_MOLE, 493 TOPO_SENSOR_UNITS_BECQUEREL, 494 TOPO_SENSOR_UNITS_PPM, 495 TOPO_SENSOR_UNITS_RESERVED1, 496 TOPO_SENSOR_UNITS_DECIBELS, 497 TOPO_SENSOR_UNITS_DBA, 498 TOPO_SENSOR_UNITS_DBC, 499 TOPO_SENSOR_UNITS_GRAY, 500 501 TOPO_SENSOR_UNITS_SIEVERT, 502 TOPO_SENSOR_UNITS_COLOR_TEMP_K, 503 TOPO_SENSOR_UNITS_BIT, 504 TOPO_SENSOR_UNITS_KILOBIT, 505 TOPO_SENSOR_UNITS_MEGABIT, 506 TOPO_SENSOR_UNITS_GIGABIT, 507 TOPO_SENSOR_UNITS_BYTE, 508 TOPO_SENSOR_UNITS_KILOBYTE, 509 TOPO_SENSOR_UNITS_MEGABYTE, 510 TOPO_SENSOR_UNITS_GIGABYTE, 511 TOPO_SENSOR_UNITS_WORD, 512 TOPO_SENSOR_UNITS_DWORD, 513 TOPO_SENSOR_UNITS_QWORD, 514 TOPO_SENSOR_UNITS_MEMLINE, 515 TOPO_SENSOR_UNITS_HIT, 516 TOPO_SENSOR_UNITS_MISS, 517 518 TOPO_SENSOR_UNITS_RETRY, 519 TOPO_SENSOR_UNITS_RESET, 520 TOPO_SENSOR_UNITS_OVERFLOW, 521 TOPO_SENSOR_UNITS_UNDERRUN, 522 TOPO_SENSOR_UNITS_COLLISION, 523 TOPO_SENSOR_UNITS_PACKETS, 524 TOPO_SENSOR_UNITS_MESSAGES, 525 TOPO_SENSOR_UNITS_CHARACTERS, 526 TOPO_SENSOR_UNITS_ERROR, 527 TOPO_SENSOR_UNITS_CE, 528 TOPO_SENSOR_UNITS_UE, 529 TOPO_SENSOR_UNITS_FATAL_ERROR, 530 TOPO_SENSOR_UNITS_GRAMS 531 } topo_sensor_unit_t; 532 533 /* 534 * Sensor Types amd the associated sensor-type-specific states 535 * 536 * These are used to decode the type and state properties in the facility 537 * propgroup on facility nodes of type sensor. 538 * 539 * Again we're basically using the same defines as for IPMI as it's serves 540 * as a good starting point and simplifies the IPMI provider code. Of course 541 * other facility providers will need to convert from their native codes 542 * to the topo code when they set the type and state properties. 543 */ 544 #define TOPO_SENSOR_TYPE_RESERVED 0x0000 545 #define TOPO_SENSOR_TYPE_TEMP 0x0001 546 #define TOPO_SENSOR_TYPE_VOLTAGE 0x0002 547 #define TOPO_SENSOR_TYPE_CURRENT 0x0003 548 #define TOPO_SENSOR_TYPE_FAN 0x0004 549 #define TOPO_SENSOR_TYPE_PHYSICAL 0x0005 550 551 #define TOPO_SENSOR_STATE_PHYSICAL_GENERAL 0x0001 552 #define TOPO_SENSOR_STATE_PHYSICAL_BAY 0x0002 553 #define TOPO_SENSOR_STATE_PHYSICAL_CARD 0x0004 554 #define TOPO_SENSOR_STATE_PHYSICAL_PROCESSOR 0x0008 555 #define TOPO_SENSOR_STATE_PHYSICAL_LAN 0x0010 556 #define TOPO_SENSOR_STATE_PHYSICAL_DOCK 0x0020 557 #define TOPO_SENSOR_STATE_PHYSICAL_FAN 0x0040 558 559 #define TOPO_SENSOR_TYPE_PLATFORM 0x0006 560 561 #define TOPO_SENSOR_STATE_PLATFORM_SECURE 0x0001 562 #define TOPO_SENSOR_STATE_PLATFORM_USER_PASS 0x0002 563 #define TOPO_SENSOR_STATE_PLATFORM_SETUP_PASS 0x0004 564 #define TOPO_SENSOR_STATE_PLATFORM_NETWORK_PASS 0x0008 565 #define TOPO_SENSOR_STATE_PLATFORM_OTHER_PASS 0x0010 566 #define TOPO_SENSOR_STATE_PLATFORM_OUT_OF_BAND 0x0020 567 568 #define TOPO_SENSOR_TYPE_PROCESSOR 0x0007 569 570 #define TOPO_SENSOR_STATE_PROCESSOR_IERR 0x0001 571 #define TOPO_SENSOR_STATE_PROCESSOR_THERMAL 0x0002 572 #define TOPO_SENSOR_STATE_PROCESSOR_FRB1 0x0004 573 #define TOPO_SENSOR_STATE_PROCESSOR_FRB2 0x0008 574 #define TOPO_SENSOR_STATE_PROCESSOR_FRB3 0x0010 575 #define TOPO_SENSOR_STATE_PROCESSOR_CONFIG 0x0020 576 #define TOPO_SENSOR_STATE_PROCESSOR_SMBIOS 0x0040 577 #define TOPO_SENSOR_STATE_PROCESSOR_PRESENT 0x0080 578 #define TOPO_SENSOR_STATE_PROCESSOR_DISABLED 0x0100 579 #define TOPO_SENSOR_STATE_PROCESSOR_TERMINATOR 0x0200 580 #define TOPO_SENSOR_STATE_PROCESSOR_THROTTLED 0x0400 581 582 #define TOPO_SENSOR_TYPE_POWER_SUPPLY 0x0008 583 584 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PRESENT 0x0001 585 #define TOPO_SENSOR_STATE_POWER_SUPPLY_FAILURE 0x0002 586 #define TOPO_SENSOR_STATE_POWER_SUPPLY_PREDFAIL 0x0004 587 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_LOST 0x0008 588 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE 0x0010 589 #define TOPO_SENSOR_STATE_POWER_SUPPLY_INPUT_RANGE_PRES 0x0020 590 #define TOPO_SENSOR_STATE_POWER_SUPPLY_CONFIG_ERR 0x0040 591 592 #define TOPO_SENSOR_TYPE_POWER_UNIT 0x0009 593 594 #define TOPO_SENSOR_STATE_POWER_UNIT_OFF 0x0001 595 #define TOPO_SENSOR_STATE_POWER_UNIT_CYCLE 0x0002 596 #define TOPO_SENSOR_STATE_POWER_UNIT_240_DOWN 0x0004 597 #define TOPO_SENSOR_STATE_POWER_UNIT_INTERLOCK_DOWN 0x0008 598 #define TOPO_SENSOR_STATE_POWER_UNIT_AC_LOST 0x0010 599 #define TOPO_SENSOR_STATE_POWER_UNIT_SOFT_FAILURE 0x0020 600 #define TOPO_SENSOR_STATE_POWER_UNIT_FAIL 0x0040 601 #define TOPO_SENSOR_STATE_POWER_UNIT_PREDFAIL 0x0080 602 603 #define TOPO_SENSOR_TYPE_COOLING 0x000A 604 #define TOPO_SENSOR_TYPE_OTHER 0x000B 605 606 #define TOPO_SENSOR_TYPE_MEMORY 0x000C 607 608 #define TOPO_SENSOR_STATE_MEMORY_CE 0x0001 609 #define TOPO_SENSOR_STATE_MEMORY_UE 0x0002 610 #define TOPO_SENSOR_STATE_MEMORY_PARITY 0x0004 611 #define TOPO_SENSOR_STATE_MEMORY_SCRUB_FAIL 0x0008 612 #define TOPO_SENSOR_STATE_MEMORY_DISABLED 0x0010 613 #define TOPO_SENSOR_STATE_MEMORY_CE_LOG_LIMIT 0x0020 614 #define TOPO_SENSOR_STATE_MEMORY_PRESENT 0x0040 615 #define TOPO_SENSOR_STATE_MEMORY_CONFIG_ERR 0x0080 616 #define TOPO_SENSOR_STATE_MEMORY_SPARE 0x0100 617 #define TOPO_SENSOR_STATE_MEMORY_THROTTLED 0x0200 618 #define TOPO_SENSOR_STATE_MEMORY_OVERTEMP 0x0400 619 620 #define TOPO_SENSOR_TYPE_BAY 0x000D 621 622 #define TOPO_SENSOR_STATE_BAY_PRESENT 0x0001 623 #define TOPO_SENSOR_STATE_BAY_FAULT 0x0002 624 #define TOPO_SENSOR_STATE_BAY_PREDFAIL 0x0004 625 #define TOPO_SENSOR_STATE_BAY_SPARE 0x0008 626 #define TOPO_SENSOR_STATE_BAY_CHECK 0x0010 627 #define TOPO_SENSOR_STATE_BAY_CRITICAL 0x0020 628 #define TOPO_SENSOR_STATE_BAY_FAILED 0x0040 629 #define TOPO_SENSOR_STATE_BAY_REBUILDING 0x0080 630 #define TOPO_SENSOR_STATE_BAY_ABORTED 0x0100 631 632 #define TOPO_SENSOR_TYPE_POST_RESIZE 0x000E 633 634 #define TOPO_SENSOR_TYPE_FIRMWARE 0x000F 635 636 #define TOPO_SENSOR_STATE_FIRMWARE_ERROR 0x0001 637 #define TOPO_SENSOR_STATE_FIRMWARE_HANG 0x0002 638 #define TOPO_SENSOR_STATE_FIRMWARE_PROGRESS 0x0004 639 640 #define TOPO_SENSOR_TYPE_EVENT_LOG 0x0010 641 642 #define TOPO_SENSOR_STATE_EVENT_LOG_CE 0x0001 643 #define TOPO_SENSOR_STATE_EVENT_LOG_TYPE 0x0002 644 #define TOPO_SENSOR_STATE_EVENT_LOG_RESET 0x0004 645 #define TOPO_SENSOR_STATE_EVENT_LOG_ALL 0x0008 646 #define TOPO_SENSOR_STATE_EVENT_LOG_FULL 0x0010 647 #define TOPO_SENSOR_STATE_EVENT_LOG_ALMOST_FULL 0x0020 648 649 #define TOPO_SENSOR_TYPE_WATCHDOG1 0x0011 650 651 #define TOPO_SENSOR_STATE_WATCHDOG_BIOS_RESET 0x0001 652 #define TOPO_SENSOR_STATE_WATCHDOG_OS_RESET 0x0002 653 #define TOPO_SENSOR_STATE_WATCHDOG_OS_SHUTDOWN 0x0004 654 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_DOWN 0x0008 655 #define TOPO_SENSOR_STATE_WATCHDOG_OS_PWR_CYCLE 0x0010 656 #define TOPO_SENSOR_STATE_WATCHDOG_OS_NMI_DIAG 0x0020 657 #define TOPO_SENSOR_STATE_WATCHDOG_EXPIRED 0x0040 658 #define TOPO_SENSOR_STATE_WATCHDOG_PRE_TIMEOUT_INT 0x0080 659 660 #define TOPO_SENSOR_TYPE_SYSTEM 0x0012 661 662 #define TOPO_SENSOR_STATE_SYSTEM_RECONF 0x0001 663 #define TOPO_SENSOR_STATE_SYSTEM_BOOT 0x0002 664 #define TOPO_SENSOR_STATE_SYSTEM_UNKNOWN_HW_FAILURE 0x0004 665 #define TOPO_SENSOR_STATE_SYSTEM_AUX_LOG_UPDATED 0x0008 666 #define TOPO_SENSOR_STATE_SYSTEM_PEF_ACTION 0x0010 667 #define TOPO_SENSOR_STATE_SYSTEM_TIMETAMP_CLOCKSYNC 0x0020 668 669 #define TOPO_SENSOR_TYPE_CRITICAL 0x0013 670 671 #define TOPO_SENSOR_STATE_CRITICAL_EXT_NMI 0x0001 672 #define TOPO_SENSOR_STATE_CRITICAL_BUS_TIMEOUT 0x0002 673 #define TOPO_SENSOR_STATE_CRITICAL_IO_NMI 0x0004 674 #define TOPO_SENSOR_STATE_CRITICAL_SW_NMI 0x0008 675 #define TOPO_SENSOR_STATE_CRITICAL_PCI_PERR 0x0010 676 #define TOPO_SENSOR_STATE_CRITICAL_PCI_SERR 0x0020 677 #define TOPO_SENSOR_STATE_CRITICAL_EISA_FAILSAFE 0x0040 678 #define TOPO_SENSOR_STATE_CRITICAL_BUS_CE 0x0080 679 #define TOPO_SENSOR_STATE_CRITICAL_BUS_UE 0x0100 680 #define TOPO_SENSOR_STATE_CRITICAL_FATAL_NMI 0x0200 681 #define TOPO_SENSOR_STATE_CRITICAL_BUS_FATAL_ERR 0x0400 682 #define TOPO_SENSOR_STATE_CRITICAL_BUS_DEGRADED 0x0800 683 684 #define TOPO_SENSOR_TYPE_BUTTON 0x0014 685 686 #define TOPO_SENSOR_STATE_BUTTON_PWR 0x0001 687 #define TOPO_SENSOR_STATE_BUTTON_SLEEP 0x0002 688 #define TOPO_SENSOR_STATE_BUTTON_RESET 0x0004 689 #define TOPO_SENSOR_STATE_BUTTON_FRU_LATCH 0x0008 690 #define TOPO_SENSOR_STATE_BUTTON_FRU_SERVICE 0x0010 691 692 #define TOPO_SENSOR_TYPE_MODULE 0x0015 693 #define TOPO_SENSOR_TYPE_MICROCONTROLLER 0x0016 694 #define TOPO_SENSOR_TYPE_CARD 0x0017 695 #define TOPO_SENSOR_TYPE_CHASSIS 0x0018 696 697 #define TOPO_SENSOR_TYPE_CHIPSET 0x0019 698 699 #define TOPO_SENSOR_STATE_CHIPSET_PWR_CTL_FAIL 0x0001 700 701 #define TOPO_SENSOR_TYPE_FRU 0x001A 702 703 #define TOPO_SENSOR_TYPE_CABLE 0x001B 704 705 #define TOPO_SENSOR_STATE_CABLE_CONNECTED 0x0001 706 #define TOPO_SENSOR_STATE_CABLE_CONFIG_ERR 0x0002 707 708 #define TOPO_SENSOR_TYPE_TERMINATOR 0x001C 709 710 #define TOPO_SENSOR_TYPE_BOOT_STATE 0x001D 711 712 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_PWR_UP 0x0001 713 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_HARD_RESET 0x0002 714 #define TOPO_SENSOR_STATE_BOOT_STATE_BIOS_WARM_RESET 0x0004 715 #define TOPO_SENSOR_STATE_BOOT_STATE_PXE_BOOT 0x0008 716 #define TOPO_SENSOR_STATE_BOOT_STATE_DIAG_BOOT 0x0010 717 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_HARD_RESET 0x0020 718 #define TOPO_SENSOR_STATE_BOOT_STATE_OS_WARM_RESET 0x0040 719 #define TOPO_SENSOR_STATE_BOOT_STATE_SYS_RESTART 0x0080 720 721 #define TOPO_SENSOR_TYPE_BOOT_ERROR 0x001E 722 723 #define TOPO_SENSOR_STATE_BOOT_ERROR_NOMEDIA 0x0001 724 #define TOPO_SENSOR_STATE_BOOT_ERROR_NON_BOOTABLE_DISK 0x0002 725 #define TOPO_SENSOR_STATE_BOOT_ERROR_NO_PXE_SERVER 0x0004 726 #define TOPO_SENSOR_STATE_BOOT_ERROR_INV_BOOT_SECT 0x0008 727 #define TOPO_SENSOR_STATE_BOOT_ERROR_USR_SELECT_TIMEOUT 0x0010 728 729 #define TOPO_SENSOR_TYPE_BOOT_OS 0x001F 730 731 #define TOPO_SENSOR_STATE_BOOT_OS_A_DRV_BOOT_COMPLETE 0x0001 732 #define TOPO_SENSOR_STATE_BOOT_OS_C_DRV_BOOT_COMPLETE 0x0002 733 #define TOPO_SENSOR_STATE_BOOT_OS_PXE_BOOT_COMPLETE 0x0004 734 #define TOPO_SENSOR_STATE_BOOT_OS_DIAG_BOOT_COMPLETE 0x0008 735 #define TOPO_SENSOR_STATE_BOOT_OS_CDROM_BOOT_COMPLETE 0x0010 736 #define TOPO_SENSOR_STATE_BOOT_OS_ROM_BOOT_COMPLETE 0x0020 737 #define TOPO_SENSOR_STATE_BOOT_OS_UNSPEC_BOOT_COMPLETE 0x0040 738 739 #define TOPO_SENSOR_TYPE_OS_SHUTDOWN 0x0020 740 741 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_LOADING 0x0001 742 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_CRASH 0x0002 743 #define TOPO_SENSOR_STATE_OS_STOP_GRACEFUL 0x0004 744 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_GRACEFUL 0x0008 745 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_PEF 0x0010 746 #define TOPO_SENSOR_STATE_OS_SHUTDOWN_BMC 0x0020 747 748 #define TOPO_SENSOR_TYPE_SLOT 0x0021 749 750 #define TOPO_SENSOR_STATE_SLOT_FAULT_ASSERTED 0x0001 751 #define TOPO_SENSOR_STATE_SLOT_IDENTIFY_ASSERTED 0x0002 752 #define TOPO_SENSOR_STATE_SLOT_CONNECTED 0x0004 753 #define TOPO_SENSOR_STATE_SLOT_INSTALL_READY 0x0008 754 #define TOPO_SENSOR_STATE_SLOT_REMOVE_READY 0x0010 755 #define TOPO_SENSOR_STATE_SLOT_PWR_OFF 0x0020 756 #define TOPO_SENSOR_STATE_SLOT_REMOVED 0x0040 757 #define TOPO_SENSOR_STATE_SLOT_INTERLOCK_ASSERTED 0x0080 758 #define TOPO_SENSOR_STATE_SLOT_DISABLED 0x0100 759 #define TOPO_SENSOR_STATE_SLOT_SPARE_DEVICE 0x0200 760 761 #define TOPO_SENSOR_TYPE_ACPI 0x0022 762 763 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S0_G0 0x0001 764 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1 0x0002 765 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S2 0x0004 766 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S3 0x0008 767 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4 0x0010 768 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_G2_SOFT_OFF 0x0020 769 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S4_S5_SOFT_OFF 0x0040 770 #define TOPO_SENSOR_STATE_ACPI_PSATTE_G3_MECH_OFF 0x0080 771 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S1_S2_S3_SLEEP 0x0100 772 #define TOPO_SENSOR_STATE_ACPI_PSTATE_G1_SLEEP 0x0200 773 #define TOPO_SENSOR_STATE_ACPI_PSTATE_S5_OVERRIDE 0x0400 774 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_ON 0x0800 775 #define TOPO_SENSOR_STATE_ACPI_PSTATE_LEGACY_OFF 0x1000 776 #define TOPO_SENSOR_STATE_ACPI_PSTATE_UNKNOWN 0x2000 777 778 #define TOPO_SENSOR_TYPE_WATCHDOG2 0x0023 779 780 #define TOPO_SENSOR_STATE_WATCHDOG2_EXPIRED 0x0001 781 #define TOPO_SENSOR_STATE_WATCHDOG2_HARD_RESET 0x0002 782 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_DOWN 0x0004 783 #define TOPO_SENSOR_STATE_WATCHDOG2_PWR_CYCLE 0x0008 784 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED1 0x0010 785 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED2 0x0020 786 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED3 0x0040 787 #define TOPO_SENSOR_STATE_WATCHDOG2_RESERVED4 0x0080 788 #define TOPO_SENSOR_STATE_WATCHDOG2_TIMEOUT_INT 0x0100 789 790 #define TOPO_SENSOR_TYPE_ALERT 0x0024 791 792 #define TOPO_SENSOR_STATE_ALERT_PLAT_PAGE 0x0001 793 #define TOPO_SENSOR_STATE_ALERT_PLAT_LAN_ALERT 0x0002 794 #define TOPO_SENSOR_STATE_ALERT_PLAT_EVT_TRAP 0x0004 795 #define TOPO_SENSOR_STATE_ALERT_PLAT_SNMP_TRAP 0x0008 796 797 #define TOPO_SENSOR_TYPE_PRESENCE 0x0025 798 799 #define TOPO_SENSOR_STATE_PRESENCE_PRESENT 0x0001 800 #define TOPO_SENSOR_STATE_PRESENCE_ABSENT 0x0002 801 #define TOPO_SENSOR_STATE_PRESENCE_DISABLED 0x0004 802 803 #define TOPO_SENSOR_TYPE_ASIC 0x0026 804 805 #define TOPO_SENSOR_TYPE_LAN 0x0027 806 807 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT_LOST 0x0001 808 #define TOPO_SENSOR_STATE_LAN_HEARTBEAT 0x0002 809 810 #define TOPO_SENSOR_TYPE_HEALTH 0x0028 811 812 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_ACC_DEGRADED 0x0001 813 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_ACC_DEGRADED 0x0002 814 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_OFFLINE 0x0004 815 #define TOPO_SENSOR_STATE_HEALTH_CNTLR_UNAVAIL 0x0008 816 #define TOPO_SENSOR_STATE_HEALTH_SENSOR_FAILURE 0x0010 817 #define TOPO_SENSOR_STATE_HEALTH_FRU_FAILURE 0x0020 818 819 #define TOPO_SENSOR_TYPE_BATTERY 0x0029 820 821 #define TOPO_SENSOR_STATE_BATTERY_LOW 0x0001 822 #define TOPO_SENSOR_STATE_BATTERY_FAILED 0x0002 823 #define TOPO_SENSOR_STATE_BATTERY_PRESENCE 0x0004 824 825 #define TOPO_SENSOR_TYPE_AUDIT 0x002A 826 827 #define TOPO_SENSOR_STATE_AUDIT_SESSION_ACTIVATED 0x0001 828 #define TOPO_SENSOR_STATE_AUDIT_SESSION_DEACTIVATED 0x0002 829 830 #define TOPO_SENSOR_TYPE_VERSION 0x002B 831 832 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE 0x0001 833 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE 0x0002 834 #define TOPO_SENSOR_STATE_VERSION_HW_INCOMPATIBLE 0x0004 835 #define TOPO_SENSOR_STATE_VERSION_SW_INCOMPATIBLE 0x0008 836 #define TOPO_SENSOR_STATE_VERSION_HW_INVAL 0x0010 837 #define TOPO_SENSOR_STATE_VERSION_SW_INVAL 0x0020 838 #define TOPO_SENSOR_STATE_VERSION_HW_CHANGE_SUCCESS 0x0040 839 #define TOPO_SENSOR_STATE_VERSION_SW_CHANGE_SUCCESS 0x0080 840 841 #define TOPO_SENSOR_TYPE_FRU_STATE 0x002C 842 843 #define TOPO_SENSOR_STATE_FRU_STATE_NOT_INSTALLED 0x0001 844 #define TOPO_SENSOR_STATE_FRU_STATE_INACTIVE 0x0002 845 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_REQ 0x0004 846 #define TOPO_SENSOR_STATE_FRU_STATE_ACT_INPROGRESS 0x0008 847 #define TOPO_SENSOR_STATE_FRU_STATE_ACTIVE 0x0010 848 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_REQ 0x0020 849 #define TOPO_SENSOR_STATE_FRU_STATE_DEACT_INPROGRESS 0x0040 850 #define TOPO_SENSOR_STATE_FRU_STATE_COMM_LOST 0x0080 851 852 /* 853 * We simplify the IPMI sensor type code defines by combining the generic 854 * and sensor-specific codes into a single range. Because there's overlap 855 * between the two ranges we offset the generic type codes by 0x0100 856 * which allows ample room in the hole for future expansion of the table to 857 * accomodate either additions to the IPMI spec or to support new sensor types 858 * for alternate provider modules. 859 */ 860 #define TOPO_SENSOR_TYPE_THRESHOLD_STATE 0x0101 861 862 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONCRIT 0x0001 863 #define TOPO_SENSOR_STATE_THRESH_LOWER_CRIT 0x0002 864 #define TOPO_SENSOR_STATE_THRESH_LOWER_NONREC 0x0004 865 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONCRIT 0x0008 866 #define TOPO_SENSOR_STATE_THRESH_UPPER_CRIT 0x0010 867 #define TOPO_SENSOR_STATE_THRESH_UPPER_NONREC 0x0020 868 869 #define TOPO_SENSOR_TYPE_GENERIC_USAGE 0x0102 870 871 #define TOPO_SENSOR_STATE_GENERIC_USAGE_IDLE 0x0001 872 #define TOPO_SENSOR_STATE_GENERIC_USAGE_ACTIVE 0x0002 873 #define TOPO_SENSOR_STATE_GENERIC_USAGE_BUSY 0x0004 874 875 #define TOPO_SENSOR_TYPE_GENERIC_STATE 0x0103 876 877 #define TOPO_SENSOR_STATE_GENERIC_STATE_DEASSERTED 0x0001 878 #define TOPO_SENSOR_STATE_GENERIC_STATE_ASSERTED 0x0002 879 880 #define TOPO_SENSOR_TYPE_GENERIC_PREDFAIL 0x0104 881 882 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_DEASSERTED 0x0001 883 #define TOPO_SENSOR_STATE_GENERIC_PREDFAIL_ASSERTED 0x0002 884 885 #define TOPO_SENSOR_TYPE_GENERIC_LIMIT 0x0105 886 887 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_NOT_EXCEEDED 0x0001 888 #define TOPO_SENSOR_STATE_GENERIC_LIMIT_EXCEEDED 0x0002 889 890 #define TOPO_SENSOR_TYPE_GENERIC_PERFORMANCE 0x0106 891 892 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_MET 0x0001 893 #define TOPO_SENSOR_STATE_GENERIC_PERFORMANCE_LAGS 0x0002 894 895 #define TOPO_SENSOR_TYPE_SEVERITY 0x0107 896 897 #define TOPO_SENSOR_STATE_SEVERITY_OK 0x0001 898 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_HIGH 0x0002 899 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_HIGH 0x0004 900 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_HIGH 0x0008 901 #define TOPO_SENSOR_STATE_SEVERITY_NONCRIT_GOING_LOW 0x0010 902 #define TOPO_SENSOR_STATE_SEVERITY_CRIT_GOING_LOW 0x0020 903 #define TOPO_SENSOR_STATE_SEVERITY_NONREC_GOING_LOW 0x0020 904 #define TOPO_SENSOR_STATE_SEVERITY_MONITOR 0x0040 905 #define TOPO_SENSOR_STATE_SEVERITY_INFORMATIONAL 0x0080 906 907 #define TOPO_SENSOR_TYPE_GENERIC_PRESENCE 0x0108 908 909 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_DEASSERTED 0x0001 910 #define TOPO_SENSOR_STATE_GENERIC_PRESENCE_ASSERTED 0x0002 911 912 #define TOPO_SENSOR_TYPE_GENERIC_AVAILABILITY 0x0109 913 914 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_DEASSERTED 0x0001 915 #define TOPO_SENSOR_STATE_GENERIC_AVAIL_ASSERTED 0x0002 916 917 #define TOPO_SENSOR_TYPE_GENERIC_STATUS 0x010A 918 919 #define TOPO_SENSOR_STATE_GENERIC_STATUS_RUNNING 0x0001 920 #define TOPO_SENSOR_STATE_GENERIC_STATUS_IN_TEST 0x0002 921 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_OFF 0x0004 922 #define TOPO_SENSOR_STATE_GENERIC_STATUS_ONLINE 0x0008 923 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFFLINE 0x0010 924 #define TOPO_SENSOR_STATE_GENERIC_STATUS_OFF_DUTY 0x0020 925 #define TOPO_SENSOR_STATE_GENERIC_STATUS_DEGRADED 0x0040 926 #define TOPO_SENSOR_STATE_GENERIC_STATUS_POWER_SAVE 0x0080 927 #define TOPO_SENSOR_STATE_GENERIC_STATUS_INSTALL_ERR 0x0100 928 929 #define TOPO_SENSOR_TYPE_GENERIC_REDUNDANCY 0x010B 930 931 /* 932 * ACPI power state 933 */ 934 #define TOPO_SENSOR_TYPE_GENERIC_ACPI 0x010C 935 936 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D0 0x0001 937 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D1 0x0002 938 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D2 0x0004 939 #define TOPO_SENSOR_STATE_GENERIC_ACPI_D3 0x0008 940 941 /* 942 * Indicator modes and types 943 */ 944 typedef enum topo_led_state { 945 TOPO_LED_STATE_OFF = 0, 946 TOPO_LED_STATE_ON 947 } topo_led_state_t; 948 949 /* 950 * This list is limited to the set of LED's that we're likely to manage through 951 * FMA. Thus is does not include things like power or activity LED's 952 */ 953 typedef enum topo_led_type { 954 TOPO_LED_TYPE_SERVICE = 0, 955 TOPO_LED_TYPE_LOCATE, 956 TOPO_LED_TYPE_OK2RM, 957 TOPO_LED_TYPE_PRESENT 958 } topo_led_type_t; 959 960 961 #ifdef __cplusplus 962 } 963 #endif 964 965 #endif /* _LIBTOPO_H */ 966