xref: /titanic_44/usr/src/cmd/vi/port/ex_v.c (revision f6db9f272f0061301cfaa1c0001b7d636eae31f4)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T	*/
/*	  All Rights Reserved  	*/


/* Copyright (c) 1981 Regents of the University of California */

#pragma ident	"%Z%%M%	%I%	%E% SMI"

#include "ex.h"
#include "ex_re.h"
#include "ex_tty.h"
#include "ex_vis.h"

/*
 * Entry points to open and visual from command mode processor.
 * The open/visual code breaks down roughly as follows:
 *
 * ex_v.c	entry points, checking of terminal characteristics
 *
 * ex_vadj.c	logical screen control, use of intelligent operations
 *		insert/delete line and coordination with screen image;
 *		updating of screen after changes.
 *
 * ex_vget.c	input of single keys and reading of input lines
 *		from the echo area, handling of \ escapes on input for
 *		uppercase only terminals, handling of memory for repeated
 *		commands and small saved texts from inserts and partline
 *		deletes, notification of multi line changes in the echo
 *		area.
 *
 * ex_vmain.c	main command decoding, some command processing.
 *
 * ex_voperate.c   decoding of operator/operand sequences and
 *		contextual scans, implementation of word motions.
 *
 * ex_vops.c	major operator interfaces, undos, motions, deletes,
 *		changes, opening new lines, shifts, replacements and yanks
 *		coordinating logical and physical changes.
 *
 * ex_vops2.c	subroutines for operator interfaces in ex_vops.c,
 *		insert mode, read input line processing at lowest level.
 *
 * ex_vops3.c	structured motion definitions of ( ) { } and [ ] operators,
 *		indent for lisp routines, () and {} balancing.
 *
 * ex_vput.c	output routines, clearing, physical mapping of logical cursor
 *		positioning, cursor motions, handling of insert character
 *		and delete character functions of intelligent and unintelligent
 *		terminals, visual mode tracing routines (for debugging),
 *		control of screen image and its updating.
 *
 * ex_vwind.c	window level control of display, forward and backward rolls,
 *		absolute motions, contextual displays, line depth determination
 */

void setsize();
void winch();
void vintr();
void ovend(ttymode);

wchar_t	atube[TUBESIZE];
jmp_buf	venv;
int windowchg;
int sigok;

/* reinitialize window size after SIGWINCH */
void windowinit()
{
	windowchg = 0;
	setsize();
	if(value(vi_WINDOW) >= lines || options[vi_WINDOW].odefault == value(vi_WINDOW))
		value(vi_WINDOW) = lines -1;
	options[vi_WINDOW].odefault = lines - 1;
	if(options[vi_SCROLL].odefault == value(vi_SCROLL))
		value(vi_SCROLL) = value(vi_WINDOW)/2;
	options[vi_SCROLL].odefault = (lines - 1)/2;
	vsetsiz(value(vi_WINDOW));
	setwind();
	vok(atube, 1);
}

void redraw()
{
	vsave();
	windowinit();
	vclear();
	vdirty(0, lines);
	if(state != VISUAL) {
		vclean();
		vmoveto(dot, cursor, 0);
	} else {
		vredraw(WTOP);
		vrepaint(cursor);
		vfixcurs();
	}
}

/*ARGSUSED*/
void
#ifdef __STDC__
winch(int sig)
#else
winch(sig)
int sig;
#endif
{
	struct winsize jwin;
	int l;

	if(ioctl(0, TIOCGWINSZ, &jwin) != -1) {
#ifdef XPG4
		oldlines = jwin.ws_row;
		oldcolumns = jwin.ws_col;
#endif /* XPG4 */
		if (sigok) {
			if (columns != jwin.ws_col || lines != jwin.ws_row)
			    redraw();
		}
	}
	else
		windowchg++;
	(void)signal(SIGWINCH, winch);
}

void
setsize()
{
	struct winsize jwin;
	int l;

	if(ioctl(0, TIOCGWINSZ, &jwin) != -1) {
		if (jwin.ws_col > 0)
			columns = jwin.ws_col;
		if (jwin.ws_row > 0)
			lines = jwin.ws_row;
	}

#ifdef XPG4
	if (envlines != -1) {
		lines = envlines;
	}

	if (envcolumns != -1) {
		columns = envcolumns;
	}

	if (envlines != -1 || envcolumns != -1) {
		jwin.ws_row = lines;
		jwin.ws_col = columns;

		if (ioctl(0, TIOCSWINSZ, &jwin) == -1) {
			jwin.ws_row = oldlines;
			jwin.ws_col = oldcolumns;

			ioctl(0, TIOCSWINSZ, &jwin);
		}
	}
#endif /* XPG4 */

	if (lines <= 1)
		lines = 24;
	l = lines;
	if (columns <= 4)
		columns = 1000;
	value(vi_WINDOW) = options[vi_WINDOW].odefault = l - 1;
}

/*
 * Enter open mode
 */
void
oop(void)
{
	unsigned char *ic;
	ttymode f;	/* was register */
	int resize;

	windowchg = 0;
	(void)signal(SIGWINCH, winch);
	ovbeg();
	if (peekchar() == '/') {
		(void)vi_compile(getchar(), 1);
		savere(&scanre);
		if (execute(0, dot) == 0)
			error(value(vi_TERSE) ? gettext("Fail") :
gettext("Pattern not found on addressed line"));
		ic = (unsigned char *)loc1;
		if (ic > linebuf && *ic == 0)
			ic--;
	} else {
		getDOT();
		ic = vskipwh(linebuf);
	}
	donewline();

	/*
	 * If overstrike then have to HARDOPEN
	 * else if can move cursor up off current line can use CRTOPEN (~~vi1)
	 * otherwise have to use ONEOPEN (like adm3)
	 */
	if (over_strike && !erase_overstrike)
		bastate = HARDOPEN;
	else if (cursor_address || cursor_up)
		bastate = CRTOPEN;
	else
		bastate = ONEOPEN;
	setwind();

	/*
	 * To avoid bombing on glass-crt's when the line is too long
	 * pretend that such terminals are 160 columns wide.
	 * If a line is too wide for display, we will dynamically
	 * switch to hardcopy open mode.
	 */
	if (state != CRTOPEN)
		WCOLS = TUBECOLS;
	if (!inglobal)
		savevis();
	vok(atube, 0);
	if (state != CRTOPEN)
		columns = WCOLS;
	Outchar = vputchar;
	f = ostart();
	if (state == CRTOPEN) {
		if (outcol == UKCOL)
			outcol = 0;
		vmoveitup(1, 1);
	} else
		outline = destline = WBOT;
	vshow(dot, NOLINE);
	vnline(ic);
	vmain();
	if (state != CRTOPEN)
		vclean();
	Command = (unsigned char *)"open";
	ovend(f);
	(void)signal(SIGWINCH, SIG_DFL);
}

void
ovbeg(void)
{

	if (inopen)
		error(gettext("Recursive open/visual not allowed"));
	Vlines = lineDOL();
	fixzero();
	setdot();
	pastwh();
	dot = addr2;
}

void
ovend(ttymode f)
{

	splitw++;
	vgoto(WECHO, 0);
	vclreol();
	vgoto(WECHO, 0);
	holdcm = 0;
	splitw = 0;
	ostop(f);
	setoutt();
	undvis();
	columns = OCOLUMNS;
	inopen = 0;
	flusho();
	netchHAD(Vlines);
}

/*
 * Enter visual mode
 */
void
vop(void)
{
	int c;
	ttymode f;	/* was register */
	extern unsigned char termtype[];

	if (!cursor_address && !cursor_up) {
		if (initev) {
toopen:
			if (generic_type)
				merror(gettext("I don't know what kind of terminal you are on - all I have is '%s'."), termtype);
			putNFL();
			merror(gettext("[Using open mode]"));
			putNFL();
			oop();
			return;
		}
		error(gettext("Visual needs addressable cursor or upline capability"));
	}
	if (over_strike && !erase_overstrike) {
		if (initev)
			goto toopen;
		error(gettext("Can't use visual on a terminal which overstrikes"));
	}
	if (!clear_screen) {
		if (initev)
			goto toopen;
		error(gettext("Visual requires clear screen capability"));
	}
	if (!scroll_forward) {
		if (initev)
			goto toopen;
		error(gettext("Visual requires scrolling"));
	}
	windowchg = 0;
	(void)signal(SIGWINCH, winch);
	ovbeg();
	bastate = VISUAL;
	c = 0;
	if (any(peekchar(), "+-^."))
		c = getchar();
	pastwh();
	vsetsiz(isdigit(peekchar()) ? getnum() : value(vi_WINDOW));
	setwind();
	donewline();
	vok(atube, 0);
	if (!inglobal)
		savevis();
	Outchar = vputchar;
	vmoving = 0;
	f = ostart();
	if (initev == 0) {
		vcontext(dot, c);
		vnline((unsigned char *)NOSTR);
	}
	vmain();
	Command = (unsigned char *)"visual";
	ovend(f);
	(void)signal(SIGWINCH, SIG_DFL);
}

/*
 * Hack to allow entry to visual with
 * empty buffer since routines internally
 * demand at least one line.
 */
void
fixzero(void)
{

	if (dol == zero) {
		bool ochng = chng;

		vdoappend((unsigned char *)"");
		if (!ochng)
			sync();
		addr1 = addr2 = one;
	} else if (addr2 == zero)
		addr2 = one;
}

/*
 * Save lines before visual between unddol and truedol.
 * Accomplish this by throwing away current [unddol,truedol]
 * and then saving all the lines in the buffer and moving
 * unddol back to dol.  Don't do this if in a global.
 *
 * If you do
 *	g/xxx/vi.
 * and then do a
 *	:e xxxx
 * at some point, and then quit from the visual and undo
 * you get the old file back.  Somewhat weird.
 */
void
savevis(void)
{

	if (inglobal)
		return;
	truedol = unddol;
	saveall();
	unddol = dol;
	undkind = UNDNONE;
}

/*
 * Restore a sensible state after a visual/open, moving the saved
 * stuff back to [unddol,dol], and killing the partial line kill indicators.
 */
void
undvis(void)
{

	if (ruptible)
		signal(SIGINT, onintr);
	squish();
	pkill[0] = pkill[1] = 0;
	unddol = truedol;
	unddel = zero;
	undap1 = one;
	undap2 = dol + 1;
	undkind = UNDALL;
	if (undadot <= zero || undadot > dol)
		undadot = zero+1;
}

/*
 * Set the window parameters based on the base state bastate
 * and the available buffer space.
 */
void
setwind(void)
{

	WCOLS = columns;
	switch (bastate) {

	case ONEOPEN:
		if (auto_right_margin)
			WCOLS--;
		/* fall into ... */

	case HARDOPEN:
		basWTOP = WTOP = WBOT = WECHO = 0;
		ZERO = 0;
		holdcm++;
		break;

	case CRTOPEN:
		basWTOP = lines - 2;
		/* fall into */

	case VISUAL:
		ZERO = lines - TUBESIZE / WCOLS;
		if (ZERO < 0)
			ZERO = 0;
		if (ZERO > basWTOP)
			error(gettext("Screen too large for internal buffer"));
		WTOP = basWTOP; WBOT = lines - 2; WECHO = lines - 1;
		break;
	}
	state = bastate;
	basWLINES = WLINES = WBOT - WTOP + 1;
}

/*
 * Can we hack an open/visual on this terminal?
 * If so, then divide the screen buffer up into lines,
 * and initialize a bunch of state variables before we start.
 */
static unsigned char vlinebuf[LBSIZE];

void
vok(wchar_t *atube, int undo)
{
	int i;
	static int beenhere;

	if (WCOLS == 1000)
		serror((unsigned char *)
		    gettext("Don't know enough about your terminal to use %s"),
		    Command);
	if (WCOLS > TUBECOLS)
		error(gettext("Terminal too wide"));
	if (WLINES >= TUBELINES || WCOLS * (WECHO - ZERO + 1) > TUBESIZE)
		error(gettext("Screen too large"));

	vtube0 = atube;
	if(beenhere)
		vclrbyte(atube, WCOLS * (WECHO - ZERO + 1));
	for (i = 0; i < ZERO; i++)
		vtube[i] = (wchar_t *) 0;
	for (; i <= WECHO; i++)
		vtube[i] = atube, atube += WCOLS;
	if(beenhere++) {
		for (; i < TUBELINES; i++)
			vtube[i] = (wchar_t *) 0;
	}
	vutmp = vlinebuf;
	if(!undo) {
		vundkind = VNONE;
		vUNDdot = 0;
	}
	OCOLUMNS = columns;
	inopen = 1;
#ifdef CBREAK
	signal(SIGINT, vintr);
#endif
	vmoving = 0;
	splitw = 0;
	doomed = 0;
	holdupd = 0;
	if(!undo)
		Peekkey = 0;
	vcnt = vcline = 0;
	if (vSCROLL == 0)
		vSCROLL = value(vi_SCROLL);
}

#ifdef CBREAK
/*ARGSUSED*/
void
#ifdef __STDC__
vintr(int sig)
#else
vintr(sig)
int sig;
#endif
{

	signal(SIGINT, vintr);
	if (vcatch)
		onintr(0);
	ungetkey(ATTN);
	draino();
}
#endif

/*
 * Set the size of the screen to size lines, to take effect the
 * next time the screen is redrawn.
 */
void
vsetsiz(int size)
{
	int b;

	if (bastate != VISUAL)
		return;
	b = lines - 1 - size;
	if (b >= lines - 1)
		b = lines - 2;
	if (b < 0)
		b = 0;
	basWTOP = b;
	basWLINES = WBOT - b + 1;
}