1# 2# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 3# Use is subject to license terms. 4# 5# Copyright 2011 Nexenta Systems, Inc. All rights reserved. 6# 7 8PROG= safe_finger tcpd tcpdchk tcpdmatch try-from 9 10include ../Makefile.cmd 11 12CFLAGS += $(CCVERBOSE) 13CPPFLAGS += $(ACCESS) $(PARANOID) $(NETGROUP) $(TLI) \ 14 $(UMASK) $(STYLE) $(TABLES) $(KILL_OPT) $(BUGS) \ 15 -DRFC931_TIMEOUT=$(RFC931_TIMEOUT) \ 16 -DFACILITY=$(FACILITY) -DSEVERITY=$(SEVERITY) \ 17 -DREAL_DAEMON_DIR=\"$(REAL_DAEMON_DIR)\" \ 18 -I../../lib/libwrap 19tcpd tcpdmatch try-from := \ 20 LDLIBS += -lwrap 21tcpdchk := LDLIBS += -lwrap -lnsl 22 23CERRWARN += -erroff=E_FUNC_HAS_NO_RETURN_STMT 24CERRWARN += -erroff=E_IMPLICIT_DECL_FUNC_RETURN_INT 25CERRWARN += -_gcc=-Wno-unused-variable 26CERRWARN += -_gcc=-Wno-parentheses 27CERRWARN += -_gcc=-Wno-uninitialized 28CERRWARN += -_gcc=-Wno-implicit-function-declaration 29CERRWARN += -_gcc=-Wno-return-type 30CERRWARN += -_gcc=-Wno-clobbered 31 32# Various components must export interfaces, but also contain name-space 33# clashes with system libraries. 34MAPFILE.INT.D= $(MAPFILE.NGB) mapfile-intf-tcpdchk 35MAPFILE.INT.M= $(MAPFILE.NGB) mapfile-intf-tcpdmatch 36MAPFILE.INT.F= $(MAPFILE.NGB) mapfile-intf-tryfrom 37 38tcpdchk := LDFLAGS +=$(MAPFILE.INT.D:%=-M%) 39tcpdmatch := LDFLAGS +=$(MAPFILE.INT.M:%=-M%) 40try-from := LDFLAGS +=$(MAPFILE.INT.F:%=-M%) 41 42.KEEP_STATE: 43 44all: $(PROG) 45 46install: all $(ROOTUSRSBINPROG) 47 48clean: 49 $(RM) *.o 50 51lint: lint_PROG 52 53TCPDMATCH_OBJ= tcpdmatch.o fakelog.o inetcf.o scaffold.o 54 55tcpdmatch: $(TCPDMATCH_OBJ) $(LIB) $(MAPFILE.INTF.M) 56 $(LINK.c) -o $@ $(TCPDMATCH_OBJ) $(LDLIBS) 57 $(POST_PROCESS) 58 59try-from: try-from.o fakelog.o $(LIB) $(MAPFILE.INTF.F) 60 $(LINK.c) -o $@ try-from.o fakelog.o $(LDLIBS) 61 $(POST_PROCESS) 62 63TCPDCHK_OBJ= tcpdchk.o fakelog.o inetcf.o scaffold.o 64 65tcpdchk: $(TCPDCHK_OBJ) $(LIB) $(MAPFILE.INTF.C) 66 $(LINK.c) -o $@ $(TCPDCHK_OBJ) $(LDLIBS) 67 $(POST_PROCESS) 68 69include ../Makefile.targ 70 71# The rest of this file contains definitions more-or-less directly from the 72# original Makefile of the tcp_wrappers distribution. 73 74############################## 75# System parameters appropriate for Solaris 9 76 77REAL_DAEMON_DIR = /usr/sbin 78TLI = -DTLI 79NETGROUP = -DNETGROUP 80 81############################## 82# Start of the optional stuff. 83 84########################################### 85# Optional: Turning on language extensions 86# 87# Instead of the default access control language that is documented in 88# the hosts_access.5 document, the wrappers can be configured to 89# implement an extensible language documented in the hosts_options.5 90# document. This language is implemented by the "options.c" source 91# module, which also gives hints on how to add your own extensions. 92# Uncomment the next definition to turn on the language extensions 93# (examples: allow, deny, banners, twist and spawn). 94# 95STYLE = -DPROCESS_OPTIONS # Enable language extensions. 96 97################################################################ 98# Optional: Changing the default disposition of logfile records 99# 100# By default, logfile entries are written to the same file as used for 101# sendmail transaction logs. See your /etc/syslog.conf file for actual 102# path names of logfiles. The tutorial section in the README file 103# gives a brief introduction to the syslog daemon. 104# 105# Change the FACILITY definition below if you disagree with the default 106# disposition. Some syslog versions (including Ultrix 4.x) do not provide 107# this flexibility. 108# 109# If nothing shows up on your system, it may be that the syslog records 110# are sent to a dedicated loghost. It may also be that no syslog daemon 111# is running at all. The README file gives pointers to surrogate syslog 112# implementations for systems that have no syslog library routines or 113# no syslog daemons. When changing the syslog.conf file, remember that 114# there must be TABs between fields. 115# 116# The LOG_XXX names below are taken from the /usr/include/syslog.h file. 117 118FACILITY= LOG_MAIL # LOG_MAIL is what most sendmail daemons use 119 120# The syslog priority at which successful connections are logged. 121 122SEVERITY= LOG_INFO # LOG_INFO is normally not logged to the console 123 124###################################################### 125# Optional: Changing the default file protection mask 126# 127# On many systems, network daemons and other system processes are started 128# with a zero umask value, so that world-writable files may be produced. 129# It is a good idea to edit your /etc/rc* files so that they begin with 130# an explicit umask setting. On our site we use `umask 022' because it 131# does not break anything yet gives adequate protection against tampering. 132# 133# The following macro specifies the default umask for processes run under 134# control of the daemon wrappers. Comment it out only if you are certain 135# that inetd and its children are started with a safe umask value. 136 137UMASK = -DDAEMON_UMASK=022 138 139####################################### 140# Optional: Turning off access control 141# 142# By default, host access control is enabled. To disable host access 143# control, comment out the following definition. Host access control 144# can also be turned off at runtime by providing no or empty access 145# control tables. 146 147ACCESS = -DHOSTS_ACCESS 148 149#################################################### 150# Optional: dealing with host name/address conflicts 151# 152# By default, the software tries to protect against hosts that claim to 153# have someone elses host name. This is relevant for network services 154# whose authentication depends on host names, such as rsh and rlogin. 155# 156# With paranoid mode on, connections will be rejected when the host name 157# does not match the host address. Connections will also be rejected when 158# the host name is available but cannot be verified. 159# 160# Comment out the following definition if you want more control over such 161# requests. When paranoid mode is off and a host name double check fails, 162# the client can be matched with the PARANOID access control pattern. 163# 164# Paranoid mode implies hostname lookup. In order to disable hostname 165# lookups altogether, see the next section. 166 167PARANOID= -DPARANOID 168 169# The default username lookup timeout is 10 seconds. This may not be long 170# enough for slow hosts or networks, but is enough to irritate PC users. 171 172RFC931_TIMEOUT = 10 173 174######################################################## 175# Optional: Changing the access control table pathnames 176# 177# The HOSTS_ALLOW and HOSTS_DENY macros define where the programs will 178# look for access control information. Watch out for the quotes and 179# backslashes when you make changes. 180 181TABLES = -DHOSTS_DENY=\"/etc/hosts.deny\" -DHOSTS_ALLOW=\"/etc/hosts.allow\" 182 183############################################# 184# Optional: Turning on host ADDRESS checking 185# 186# Optionally, the software tries to protect against hosts that pretend to 187# have someone elses host address. This is relevant for network services 188# whose authentication depends on host names, such as rsh and rlogin, 189# because the network address is used to look up the remote host name. 190# 191# The protection is to refuse TCP connections with IP source routing 192# options. 193# 194# This feature cannot be used with SunOS 4.x because of a kernel bug in 195# the implementation of the getsockopt() system call. Kernel panics have 196# been observed for SunOS 4.1.[1-3]. Symptoms are "BAD TRAP" and "Data 197# fault" while executing the tcp_ctloutput() kernel function. 198# 199# Reportedly, Sun patch 100804-03 or 101790 fixes this for SunOS 4.1.x. 200# 201# Uncomment the following macro definition if your getsockopt() is OK. 202# 203# -DKILL_IP_OPTIONS is not needed on modern UNIX systems that can stop 204# source-routed traffic in the kernel. Examples: 4.4BSD derivatives, 205# Solaris 2.x, and Linux. See your system documentation for details. 206# 207# KILL_OPT= -DKILL_IP_OPTIONS 208 209## End configuration options 210############################ 211