xref: /titanic_44/usr/src/cmd/ssh/sshd/auth2.c (revision 9dd0f810214fdc8e1af881a9a5c4b6927629ff9e)
1 /*
2  * Copyright (c) 2000 Markus Friedl.  All rights reserved.
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  */
24 /*
25  * Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
26  * Use is subject to license terms.
27  */
28 
29 #include "includes.h"
30 RCSID("$OpenBSD: auth2.c,v 1.95 2002/08/22 21:33:58 markus Exp $");
31 
32 #pragma ident	"%Z%%M%	%I%	%E% SMI"
33 
34 #include "ssh2.h"
35 #include "xmalloc.h"
36 #include "packet.h"
37 #include "log.h"
38 #include "servconf.h"
39 #include "compat.h"
40 #include "misc.h"
41 #include "auth.h"
42 #include "dispatch.h"
43 #include "sshlogin.h"
44 #include "pathnames.h"
45 #include "monitor_wrap.h"
46 
47 #ifdef HAVE_BSM
48 #include "bsmaudit.h"
49 extern adt_session_data_t *ah;
50 #endif /* HAVE_BSM */
51 
52 #ifdef GSSAPI
53 #include "ssh-gss.h"
54 #endif
55 
56 /* import */
57 extern ServerOptions options;
58 extern u_char *session_id2;
59 extern int session_id2_len;
60 
61 Authctxt *x_authctxt = NULL;
62 
63 /* methods */
64 
65 extern Authmethod method_none;
66 extern Authmethod method_pubkey;
67 extern Authmethod method_passwd;
68 extern Authmethod method_kbdint;
69 extern Authmethod method_hostbased;
70 extern Authmethod method_external;
71 extern Authmethod method_gssapi;
72 
73 static Authmethod *authmethods[] = {
74 	&method_none,
75 #ifdef GSSAPI
76 	&method_external,
77 	&method_gssapi,
78 #endif
79 	&method_pubkey,
80 	&method_passwd,
81 	&method_kbdint,
82 	&method_hostbased,
83 	NULL
84 };
85 
86 /* protocol */
87 
88 static void input_service_request(int, u_int32_t, void *);
89 static void input_userauth_request(int, u_int32_t, void *);
90 
91 /* helper */
92 static Authmethod *authmethod_lookup(const char *);
93 static char *authmethods_get(void);
94 static char *authmethods_check_abandonment(Authctxt *authctxt,
95 					  Authmethod *method);
96 static void  authmethod_count_attempt(Authmethod *method);
97 /*static char *authmethods_get_kbdint(void);*/
98 int user_key_allowed(struct passwd *, Key *);
99 int hostbased_key_allowed(struct passwd *, const char *, char *, Key *);
100 static int   userauth_method_can_run(Authmethod *method);
101 static void  userauth_reset_methods(void);
102 
103 /*
104  * loop until authctxt->success == TRUE
105  */
106 
107 Authctxt *
108 do_authentication2(void)
109 {
110 	Authctxt *authctxt = authctxt_new();
111 
112 	x_authctxt = authctxt;		/*XXX*/
113 
114 #ifdef HAVE_BSM
115 	fatal_add_cleanup(audit_failed_login_cleanup, authctxt);
116 #endif /* HAVE_BSM */
117 
118 	/* challenge-response is implemented via keyboard interactive */
119 	if (options.challenge_response_authentication)
120 		options.kbd_interactive_authentication = 1;
121 	if (options.pam_authentication_via_kbd_int)
122 		options.kbd_interactive_authentication = 1;
123 	if (use_privsep)
124 		options.pam_authentication_via_kbd_int = 0;
125 
126 	dispatch_init(&dispatch_protocol_error);
127 	dispatch_set(SSH2_MSG_SERVICE_REQUEST, &input_service_request);
128 	dispatch_run(DISPATCH_BLOCK, &authctxt->success, authctxt);
129 
130 	return (authctxt);
131 }
132 
133 static void
134 input_service_request(int type, u_int32_t seq, void *ctxt)
135 {
136 	Authctxt *authctxt = ctxt;
137 	u_int len;
138 	int acceptit = 0;
139 	char *service = packet_get_string(&len);
140 	packet_check_eom();
141 
142 	if (authctxt == NULL)
143 		fatal("input_service_request: no authctxt");
144 
145 	if (strcmp(service, "ssh-userauth") == 0) {
146 		if (!authctxt->success) {
147 			acceptit = 1;
148 			/* now we can handle user-auth requests */
149 			dispatch_set(SSH2_MSG_USERAUTH_REQUEST, &input_userauth_request);
150 		}
151 	}
152 	/* XXX all other service requests are denied */
153 
154 	if (acceptit) {
155 		packet_start(SSH2_MSG_SERVICE_ACCEPT);
156 		packet_put_cstring(service);
157 		packet_send();
158 		packet_write_wait();
159 	} else {
160 		debug("bad service request %s", service);
161 		packet_disconnect("bad service request %s", service);
162 	}
163 	xfree(service);
164 }
165 
166 static void
167 input_userauth_request(int type, u_int32_t seq, void *ctxt)
168 {
169 	Authctxt *authctxt = ctxt;
170 	Authmethod *m = NULL;
171 	char *user, *service, *method, *style = NULL;
172 
173 	if (authctxt == NULL)
174 		fatal("input_userauth_request: no authctxt");
175 
176 	user = packet_get_string(NULL);
177 	service = packet_get_string(NULL);
178 	method = packet_get_string(NULL);
179 	debug("userauth-request for user %s service %s method %s", user,
180 		service, method);
181 	debug("attempt %d initial attempt %d failures %d initial failures %d",
182 		authctxt->attempt, authctxt->init_attempt,
183 		authctxt->failures, authctxt->init_failures);
184 
185 	m = authmethod_lookup(method);
186 
187 	if ((style = strchr(user, ':')) != NULL)
188 		*style++ = 0;
189 
190 	authctxt->attempt++;
191 	if (m != NULL && m->is_initial)
192 		authctxt->init_attempt++;
193 
194 	if (authctxt->attempt == 1) {
195 		/* setup auth context */
196 		authctxt->pw = PRIVSEP(getpwnamallow(user));
197 		/* May want to abstract SSHv2 services someday */
198 		if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
199 			/* enforced in userauth_finish() below */
200 			authctxt->valid = 1;
201 			debug2("input_userauth_request: setting up authctxt for %s", user);
202 		} else {
203 			log("input_userauth_request: illegal user %s", user);
204 		}
205 		setproctitle("%s%s", authctxt->pw ? user : "unknown",
206 		    use_privsep ? " [net]" : "");
207 		authctxt->user = xstrdup(user);
208 		authctxt->service = xstrdup(service);
209 		authctxt->style = style ? xstrdup(style) : NULL;
210 		userauth_reset_methods();
211 		if (use_privsep)
212 			mm_inform_authserv(service, style);
213 	} else {
214 		char *abandoned;
215 
216 		/*
217 		 * Check for abandoned [multi-round-trip] userauths
218 		 * methods (e.g., kbdint).  Userauth method abandonment
219 		 * should be treated as userauth method failure and
220 		 * counted against max_auth_tries.
221 		 */
222 		abandoned = authmethods_check_abandonment(authctxt, m);
223 
224 		if (abandoned != NULL &&
225 		    authctxt->failures > options.max_auth_tries) {
226 			/* userauth_finish() will now packet_disconnect() */
227 			userauth_finish(authctxt, abandoned);
228 			/* NOTREACHED */
229 		}
230 
231 		/* Handle user|service changes, possibly packet_disconnect() */
232 		userauth_user_svc_change(authctxt, user, service);
233 	}
234 
235 	authctxt->method = m;
236 
237 	/* run userauth method, try to authenticate user */
238 	if (m != NULL && userauth_method_can_run(m)) {
239 		debug2("input_userauth_request: try method %s", method);
240 
241 		m->postponed = 0;
242 		m->abandoned = 0;
243 		m->authenticated = 0;
244 
245 		if (!m->is_initial ||
246 		    authctxt->init_failures < options.max_init_auth_tries)
247 			m->userauth(authctxt);
248 
249 		authmethod_count_attempt(m);
250 
251 		if (authctxt->unwind_dispatch_loop) {
252 			/*
253 			 * Method ran nested dispatch loop but was
254 			 * abandoned.  Cleanup and return without doing
255 			 * anything else; we're just unwinding the stack.
256 			 */
257 			authctxt->unwind_dispatch_loop = 0;
258 			goto done;
259 		}
260 
261 		if (m->postponed)
262 			goto done; /* multi-round trip userauth not finished */
263 
264 		if (m->abandoned) {
265 			/* multi-round trip userauth abandoned, log failure */
266 			auth_log(authctxt, 0, method, " ssh2");
267 			goto done;
268 		}
269 	}
270 
271 	userauth_finish(authctxt, method);
272 
273 done:
274 	xfree(service);
275 	xfree(user);
276 	xfree(method);
277 }
278 
279 void
280 userauth_finish(Authctxt *authctxt, char *method)
281 {
282 	int authenticated, partial;
283 
284 	if (authctxt == NULL)
285 		fatal("%s: missing context", __func__);
286 
287 	/* unknown method handling -- must elicit userauth failure msg */
288 	if (authctxt->method == NULL) {
289 		authenticated = 0;
290 		partial = 0;
291 		goto done_checking;
292 	}
293 
294 #ifndef USE_PAM
295 	/* Special handling for root (done elsewhere for PAM) */
296 	if (!use_privsep &&
297 	    authctxt->method->authenticated &&
298 	    authctxt->pw != NULL && authctxt->pw->pw_uid == 0 &&
299 	    !auth_root_allowed(method))
300 		authctxt->method->authenticated = 0;
301 #endif /* USE_PAM */
302 
303 #ifdef _UNICOS
304 	if (authctxt->method->authenticated &&
305 	    cray_access_denied(authctxt->user)) {
306 		authctxt->method->authenticated = 0;
307 		fatal("Access denied for user %s.",authctxt->user);
308 	}
309 #endif /* _UNICOS */
310 
311 	partial = userauth_check_partial_failure(authctxt);
312 	authenticated = authctxt->method->authenticated;
313 
314 #ifdef USE_PAM
315 	/*
316 	 * If the userauth method failed to complete PAM work then force
317 	 * partial failure.
318 	 */
319 	if (authenticated && !AUTHPAM_DONE(authctxt))
320 		partial = 1;
321 #endif /* USE_PAM */
322 
323 	/*
324 	 * To properly support invalid userauth method names we set
325 	 * authenticated=0, partial=0 above and know that
326 	 * authctxt->method == NULL.
327 	 *
328 	 * No unguarded reference to authctxt->method allowed from here.
329 	 * Checking authenticated != 0 is a valid guard; authctxt->method
330 	 * MUST NOT be NULL if authenticated.
331 	 */
332 done_checking:
333 	if (!authctxt->valid && authenticated) {
334 		/*
335 		 * Should never happen -- if it does PAM's at fault
336 		 * but we need not panic, just treat as a failure.
337 		 */
338 		authctxt->method->authenticated = 0;
339 		authenticated = 0;
340 		log("Ignoring authenticated invalid user %s",
341 		    authctxt->user);
342 		auth_log(authctxt, 0, method, " ssh2");
343 	}
344 
345 	/* Log before sending the reply */
346 	auth_log(authctxt, authenticated, method, " ssh2");
347 
348 	if (authenticated && !partial) {
349 
350 		/* turn off userauth */
351 		dispatch_set(SSH2_MSG_USERAUTH_REQUEST, &dispatch_protocol_ignore);
352 		packet_start(SSH2_MSG_USERAUTH_SUCCESS);
353 		packet_send();
354 		packet_write_wait();
355 		/* now we can break out */
356 		authctxt->success = 1;
357 	} else {
358 		char *methods;
359 
360 		if (authctxt->method && authctxt->method->is_initial)
361 			authctxt->init_failures++;
362 
363 		authctxt->method = NULL;
364 
365 #ifdef USE_PAM
366 		/*
367 		 * Keep track of last PAM error (or PERM_DENIED) for BSM
368 		 * login failure auditing, which may run after the PAM
369 		 * state has been cleaned up.
370 		 */
371 		authctxt->pam_retval = AUTHPAM_ERROR(authctxt, PAM_PERM_DENIED);
372 #endif /* USE_PAM */
373 
374 		if (authctxt->failures++ > options.max_auth_tries) {
375 #ifdef HAVE_BSM
376 			fatal_remove_cleanup(audit_failed_login_cleanup,
377 				authctxt);
378 			audit_sshd_login_failure(&ah, PAM_MAXTRIES);
379 #endif /* HAVE_BSM */
380 			packet_disconnect(AUTH_FAIL_MSG, authctxt->user);
381 		}
382 
383 #ifdef _UNICOS
384 		if (strcmp(method, "password") == 0)
385 			cray_login_failure(authctxt->user, IA_UDBERR);
386 #endif /* _UNICOS */
387 		packet_start(SSH2_MSG_USERAUTH_FAILURE);
388 
389 		/*
390 		 * If (partial) then authmethods_get() will return only
391 		 * required methods, likely only "keyboard-interactive;"
392 		 * (methods == NULL) implies failure, even if (partial == 1)
393 		 */
394 		methods = authmethods_get();
395 		packet_put_cstring(methods);
396 		packet_put_char((authenticated && partial && methods) ? 1 : 0);
397 		if (methods)
398 			xfree(methods);
399 		packet_send();
400 		packet_write_wait();
401 	}
402 }
403 
404 /* get current user */
405 
406 struct passwd*
407 auth_get_user(void)
408 {
409 	return (x_authctxt != NULL && x_authctxt->valid) ? x_authctxt->pw : NULL;
410 }
411 
412 #define	DELIM	","
413 
414 #if 0
415 static char *
416 authmethods_get_kbdint(void)
417 {
418 	Buffer b;
419 	int i;
420 
421 	for (i = 0; authmethods[i] != NULL; i++) {
422 		if (strcmp(authmethods[i]->name, "keyboard-interactive") != 0)
423 			continue;
424 		return xstrdup(authmethods[i]->name);
425 	}
426 	return NULL;
427 }
428 #endif
429 
430 void
431 userauth_user_svc_change(Authctxt *authctxt, char *user, char *service)
432 {
433 	/*
434 	 * NOTE:
435 	 *
436 	 * SSHv2 services should be abstracted and service changes during
437 	 * userauth should be supported as per the userauth draft.  In the PAM
438 	 * case, support for multiple SSHv2 services means that we have to
439 	 * format the PAM service name according to the SSHv2 service *and* the
440 	 * SSHv2 userauth being attempted ("passwd", "kbdint" and "other").
441 	 *
442 	 * We'll cross that bridge when we come to it.  For now disallow service
443 	 * changes during userauth if using PAM, but allow username changes.
444 	 */
445 
446 	/* authctxt->service must == ssh-connection here */
447 	if (service != NULL && strcmp(service, authctxt->service) != 0) {
448 		packet_disconnect("Change of service not "
449 				  "allowed: %s and %s",
450 				  authctxt->service, service);
451 	}
452 	if (user != NULL && authctxt->user != NULL &&
453 	    strcmp(user, authctxt->user) == 0)
454 		return;
455 
456 	/* All good; update authctxt */
457 	xfree(authctxt->user);
458 	authctxt->user = xstrdup(user);
459 	pwfree(&authctxt->pw);
460 	authctxt->pw = PRIVSEP(getpwnamallow(user));
461 	authctxt->valid = (authctxt->pw != NULL);
462 
463 	/* Forget method state; abandon postponed userauths */
464 	userauth_reset_methods();
465 }
466 
467 int
468 userauth_check_partial_failure(Authctxt *authctxt)
469 {
470 	int i;
471 	int required = 0;
472 	int sufficient = 0;
473 
474 	/*
475 	 * v1 does not set authctxt->method
476 	 * partial userauth failure is a v2 concept
477 	 */
478 	if (authctxt->method == NULL)
479 		return 0;
480 
481 	for (i = 0; authmethods[i] != NULL; i++) {
482 		if (authmethods[i]->required)
483 			required++;
484 		if (authmethods[i]->sufficient)
485 			sufficient++;
486 	}
487 
488 	if (required == 0 && sufficient == 0)
489 		return !authctxt->method->authenticated;
490 
491 	if (required == 1 && authctxt->method->required)
492 		return !authctxt->method->authenticated;
493 
494 	if (sufficient && authctxt->method->sufficient)
495 		return !authctxt->method->authenticated;
496 
497 	return 1;
498 }
499 
500 int
501 userauth_method_can_run(Authmethod *method)
502 {
503 	if (method->not_again)
504 		return 0;
505 
506 	return 1;
507 }
508 
509 static
510 void
511 userauth_reset_methods(void)
512 {
513 	int i;
514 
515 	for (i = 0; authmethods[i] != NULL; i++) {
516 		/* note: counters not reset */
517 		authmethods[i]->required = 0;
518 		authmethods[i]->sufficient = 0;
519 		authmethods[i]->authenticated = 0;
520 		authmethods[i]->not_again = 0;
521 		authmethods[i]->postponed = 0;
522 		authmethods[i]->abandoned = 0;
523 	}
524 }
525 
526 void
527 userauth_force_kbdint(void)
528 {
529 	int i;
530 
531 	for (i = 0; authmethods[i] != NULL; i++) {
532 		authmethods[i]->required = 0;
533 		authmethods[i]->sufficient = 0;
534 	}
535 	method_kbdint.required = 1;
536 }
537 
538 /*
539  * Check to see if a previously run multi-round trip userauth method has
540  * been abandoned and call its cleanup function.
541  *
542  * Abandoned userauth method invocations are counted as userauth failures.
543  */
544 static
545 char *
546 authmethods_check_abandonment(Authctxt *authctxt, Authmethod *method)
547 {
548 	int i;
549 
550 	/* optimization: check current method first */
551 	if (method && method->postponed) {
552 		method->postponed = 0;
553 		if (method->abandon)
554 			method->abandon(authctxt, method);
555 		else
556 			method->abandons++;
557 		authctxt->failures++; /* abandonment -> failure */
558 		if (method->is_initial)
559 			authctxt->init_failures++;
560 
561 		/*
562 		 * Since we check for abandonment whenever a userauth is
563 		 * requested we know only one method could have been
564 		 * in postponed state, so we can return now.
565 		 */
566 		return (method->name);
567 	}
568 	for (i = 0; authmethods[i] != NULL; i++) {
569 		if (!authmethods[i]->postponed)
570 			continue;
571 
572 		/* some method was postponed and a diff one is being started */
573 		if (method != authmethods[i]) {
574 			authmethods[i]->postponed = 0;
575 			if (authmethods[i]->abandon)
576 				authmethods[i]->abandon(authctxt,
577 							authmethods[i]);
578 			else
579 				authmethods[i]->abandons++;
580 			authctxt->failures++;
581 			if (authmethods[i]->is_initial)
582 				authctxt->init_failures++;
583 			return (authmethods[i]->name); /* see above */
584 		}
585 	}
586 
587 	return NULL;
588 }
589 
590 static char *
591 authmethods_get(void)
592 {
593 	Buffer b;
594 	char *list;
595 	int i;
596 	int sufficient = 0;
597 	int required = 0;
598 	int authenticated = 0;
599 	int partial = 0;
600 
601 	/*
602 	 * If at least one method succeeded partially then at least one
603 	 * authmethod will be required and only required methods should
604 	 * continue.
605 	 */
606 	for (i = 0; authmethods[i] != NULL; i++) {
607 		if (authmethods[i]->authenticated)
608 			authenticated++;
609 		if (authmethods[i]->required)
610 			required++;
611 		if (authmethods[i]->sufficient)
612 			sufficient++;
613 	}
614 
615 	partial = (required + sufficient) > 0;
616 
617 	buffer_init(&b);
618 	for (i = 0; authmethods[i] != NULL; i++) {
619 		if (strcmp(authmethods[i]->name, "none") == 0)
620 			continue;
621 		if (required && !authmethods[i]->required)
622 			continue;
623 		if (sufficient && !required && !authmethods[i]->sufficient)
624 			continue;
625 		if (authmethods[i]->not_again)
626 			continue;
627 
628 		if (authmethods[i]->required) {
629 			if (buffer_len(&b) > 0)
630 				buffer_append(&b, ",", 1);
631 			buffer_append(&b, authmethods[i]->name,
632 			    strlen(authmethods[i]->name));
633 			continue;
634 		}
635 
636 		/*
637 		 * A method can be enabled (marked sufficient)
638 		 * dynamically provided that at least one other method
639 		 * has succeeded partially.
640 		 */
641 		if ((partial && authmethods[i]->sufficient) ||
642 		    (authmethods[i]->enabled != NULL &&
643 		    *(authmethods[i]->enabled) != 0)) {
644 			if (buffer_len(&b) > 0)
645 				buffer_append(&b, ",", 1);
646 			buffer_append(&b, authmethods[i]->name,
647 			    strlen(authmethods[i]->name));
648 		}
649 	}
650 	buffer_append(&b, "\0", 1);
651 	list = xstrdup(buffer_ptr(&b));
652 	buffer_free(&b);
653 	return list;
654 }
655 
656 static Authmethod *
657 authmethod_lookup(const char *name)
658 {
659 	int i;
660 
661 	/*
662 	 * Method must be sufficient, required or enabled and must not
663 	 * be marked as not able to run again
664 	 */
665 	if (name != NULL)
666 		for (i = 0; authmethods[i] != NULL; i++)
667 			if (((authmethods[i]->sufficient ||
668 			      authmethods[i]->required) ||
669 			     (authmethods[i]->enabled != NULL &&
670 			      *(authmethods[i]->enabled) != 0)) &&
671 			    !authmethods[i]->not_again &&
672 			    strcmp(name, authmethods[i]->name) == 0)
673 				return authmethods[i];
674 	debug2("Unrecognized authentication method name: %s",
675 	    name ? name : "NULL");
676 	return NULL;
677 }
678 
679 static void
680 authmethod_count_attempt(Authmethod *method)
681 {
682 	if (!method)
683 		fatal("Internal error in authmethod_count_attempt()");
684 
685 	if (method->postponed)
686 		return;
687 
688 	method->attempts++;
689 
690 	if (method->abandoned)
691 		method->abandons++;
692 	else if (method->authenticated)
693 		method->successes++;
694 	else
695 		method->failures++;
696 
697 	return;
698 }
699