xref: /titanic_44/usr/src/cmd/sgs/Makefile.targ (revision b7f45089ccbe01bab3d7c7377b49d80d2ae18a69) 
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License, Version 1.0 only
6# (the "License").  You may not use this file except in compliance
7# with the License.
8#
9# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10# or http://www.opensolaris.org/os/licensing.
11# See the License for the specific language governing permissions
12# and limitations under the License.
13#
14# When distributing Covered Code, include this CDDL HEADER in each
15# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16# If applicable, add the following below this CDDL HEADER, with the
17# fields enclosed by brackets "[]" replaced with your own identifying
18# information: Portions Copyright [yyyy] [name of copyright owner]
19#
20# CDDL HEADER END
21#
22#
23# Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# ident	"%Z%%M%	%I%	%E% SMI"
27#
28# cmd/sgs/Makefile.targ
29
30
31################################################################################
32#
33# Linting the Linker Libraries
34#
35#  Several of the linker's libraries are, in whole or in part,
36#  are built in two passes, once as Elf32 and once as Elf64,
37#  i.e. with -D_ELF64 defined.  Lint needs to be able to do
38#  both passes, but combining the two is problematic for the
39#  2nd pass of lint, as it sees many interfaces as being defined
40#  both ways and considers them to be incompatible.  The targets
41#  defined here allow for both passes to live independently.
42#  This means that both the lint.out, and the lint library itself
43#  get generated separately, to different output files.  The
44#  lint.out's get combined into a single lint.out report, and
45#  the lint libraries get generated with a 32/64 suffix.  The
46#  dependents on these lint libraries, then, choose which version
47#  the need to use.  Substitutions can be made automatically if
48#  the macro's defined in ./Makefile.com are used to specify
49#  the dependency, for those libs that need them.
50#
51# Don't
52#
53#  Don't use the /*LINTLIBRARY*/ directive in linker libraries,
54#  this disables some important checks, including the ability
55#  to test format strings from the msg.h files.
56#
57#  Don't use the `-x' option to lint when linting linker libraries.
58#  This masks all the dead wood in our own header files.  Instead,
59#  there has been added to the relevant common directories a file
60#  called `lintsup.c' which is used to mask out the headers that
61#  we aren't interested in.  This method is used for libraries, like
62#  libld, which have their own header files, but is irrelevant to
63#  libraries like libldstab which exports no interface of it's own.
64#
65#  The `lintsup.c' file can also be used, in some cases, to mask
66#  out other issues that lint won't otherwise shut up about.
67#
68# Other Lint Options
69#
70#  `-m' has been added to the LINTFLAGS.  Warnings about globals
71#  that could be static are irrelevant because we use mapfiles to
72#  scope down unnecessary globals.
73#
74#  `-u' is used in the LINTFLAGS for libraries, otherwise lint
75#  tends to be very noisy.
76#
77#  `-x' is avoided for libraries, but is used for executables
78#  because all we care about is that what we use is defined,
79#  not about declarations in public headers that we don't use.
80#
81# Relevant variables:
82#
83# */Makefile.com
84#	SRCS=		../common/llib-l<libname>
85#	LINTSRCS=	<source files>
86#	LDLIBS=		... [$(LDDBG_LIB) $(LD_LIB)]
87#	LINTFLAGS=	...
88#	LINTFLAGS64=	...
89#	CLEANFILES +=	... $(LINTOUTS)
90#	CLOBBERFILES +=	... $(LINTLIBS)
91#
92# Relevant targets:
93#
94# */Makefile.targ
95#	# this file for SGS lint targets.
96#	include		$(SRC)/cmd/sgs/Makefile.targ
97#
98#	lint:		<choose the desired functionality> $(SGSLINTOUT)
99#
100#		$(LINTLIB32),
101#		$(LINTLIB64)	Create an Elf32 or Elf64 lint library from
102#				a proto file indicated by the $(SRCS) variable.
103#
104#		$(LINTOUT32),
105#		$(LINTOUT64)	Run lint on the sources indicated by the
106#				$(LINTSRCS) variable with respect to Elf32
107#				or Elf64.  Dependencies are gathered from
108#				the $(LDLIBS) variable.
109#
110#		$(SGSLINTOUT)	Create a `lint.out' file as the concatination
111#				of the lint output from the previous targets.
112#				This should be specified *last* in the list.
113#
114################################################################################
115
116#
117# Override the OS's $(LINTOUT) target to avoid confusion.
118#
119LINTOUT =	$(LINTOUT1)
120
121#
122# If LD_LIB or LDDBG_LIB is added to LDLIBS, then the
123# right lint library should be picked up automatically.
124#
125$(LINTOUT32) :=	LD_LIB=$(LD_LIB32)
126$(LINTOUT32) :=	LDDBG_LIB=$(LDDBG_LIB32)
127$(LINTOUT64) :=	LD_LIB=$(LD_LIB64)
128$(LINTOUT64) :=	LDDBG_LIB=$(LDDBG_LIB64)
129
130#
131# Force $(LINTLIB) in order to help the $(SGSLINTOUT)
132# target produce the same output on successive runs.
133#
134$(LINTLIB):	FRC
135
136$(LINTLIB32):	$(SRCS)
137	$(LINT.c) -o $(LIBNAME32) $(SRCS)
138
139$(LINTLIB64):	$(SRCS)
140	$(LINT.c) -D_ELF64 -o $(LIBNAME64) $(SRCS)
141
142$(LINTOUT32):	$(LINTSRCS) $(LINTSRCS32)
143	$(LINT.c) $(LINTSRCS) $(LINTSRCS32) $(LDLIBS) > $(LINTOUT32) 2>&1
144
145$(LINTOUT64):	$(LINTSRCS) $(LINTSRCS64)
146	$(LINT.c) -D_ELF64 $(LINTSRCS) $(LINTSRCS64) \
147	    $(LDLIBS) > $(LINTOUT64) 2>&1
148
149$(SGSLINTOUT): FRC
150	@ rm -f $(SGSLINTOUT)
151	@ if [ -r $(LINTOUT1) ]; then			\
152		echo "\n"$(LINTLIB) >> $(SGSLINTOUT);	\
153		echo $(DASHES) >> $(SGSLINTOUT);	\
154		cat $(LINTOUT1) >> $(SGSLINTOUT);	\
155	fi
156	@ if [ -r $(LINTOUT32) ]; then			\
157		if [ -n "$(DYNLIB)" ] ; then		\
158			echo "\nElf32 - $(DYNLIB)" >> $(SGSLINTOUT);	\
159		elif [ -n "$(RTLD)" ] ; then		\
160			echo "\nElf32 - $(RTLD)" >> $(SGSLINTOUT);	\
161		else echo "\nElf32 - $(PROG)" >> $(SGSLINTOUT);	\
162		fi; \
163		echo $(DASHES) >> $(SGSLINTOUT);	\
164		cat $(LINTOUT32) >> $(SGSLINTOUT);	\
165	fi
166	@ if [ -r $(LINTOUT64) ]; then			\
167		if [ -n "$(DYNLIB)" ] ; then		\
168			if [ $(DYNLIB) = "libld.so.2" ] ; then \
169				echo "\nElf64 - libld.so.3" >> $(SGSLINTOUT);	\
170			else \
171				echo "\nElf64 - $(DYNLIB)" >> $(SGSLINTOUT);	\
172			fi; \
173		elif [ -n "$(RTLD)" ] ; then		\
174			echo "\nElf64 - $(RTLD)" >> $(SGSLINTOUT);	\
175		else echo "\nElf64 - $(PROG)" >> $(SGSLINTOUT);	\
176		fi; \
177		echo $(DASHES) >> $(SGSLINTOUT);	\
178		cat $(LINTOUT64) >> $(SGSLINTOUT);	\
179	fi
180	@ rm -f $(LINTOUT1) $(LINTOUT32) $(LINTOUT64)
181
182#
183# For those that install the lint library source file.
184#
185$(ROOTLIBDIR)/$(LINTLIBSRC): ../common/$(LINTLIBSRC)
186	$(INS.file) ../common/$(LINTLIBSRC)
187
188$(VAR_POUND_1)$(ROOTFS_LIBDIR)/$(LIBLINKS): $(ROOTFS_LIBDIR)/$(LIBLINKS)$(VERS)
189$(VAR_POUND_1)	$(INS.liblink)
190
191$(VAR_POUND_1)$(ROOTFS_LIBDIR64)/$(LIBLINKS): $(ROOTFS_LIBDIR64)/$(LIBLINKS)$(VERS)
192$(VAR_POUND_1)	$(INS.liblink64)
193
194$(VAR_POUND_1)$(ROOTFS_LIBDIR)/$(LIBLINKSCCC): $(ROOTFS_LIBDIR)/$(LIBLINKSCCC)$(VERS)
195$(VAR_POUND_1)	$(INS.liblinkccc)
196
197$(VAR_POUND_1)$(ROOTFS_LIBDIR64)/$(LIBLINKSCCC): $(ROOTFS_LIBDIR64)/$(LIBLINKSCCC)$(VERS)
198$(VAR_POUND_1)	$(INS.liblinkccc64)
199
200FRC:
201