xref: /titanic_44/usr/src/cmd/cmd-inet/usr.sbin/in.rshd.c (revision ea8dc4b6d2251b437950c0056bc626b311c73c27)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*	Copyright (c) 1983-1989 AT&T	*/
28 /*	  All Rights Reserved  	*/
29 
30 /*
31  * Portions of this source code were derived from Berkeley 4.3 BSD
32  * under license from the Regents of the University of California.
33  */
34 
35 #pragma ident	"%Z%%M%	%I%	%E% SMI"
36 
37 #define	_FILE_OFFSET_BITS 64
38 
39 /*
40  * remote shell server:
41  *	remuser\0
42  *	locuser\0
43  *	command\0
44  *	data
45  */
46 #include <sys/types.h>
47 #include <sys/ioctl.h>
48 #include <sys/telioctl.h>
49 #include <sys/param.h>
50 #include <sys/socket.h>
51 #include <sys/time.h>
52 #include <sys/stat.h>
53 #include <sys/file.h>
54 #include <sys/select.h>
55 
56 #include <netinet/in.h>
57 
58 #include <arpa/inet.h>
59 
60 #include <unistd.h>
61 #include <string.h>
62 #include <stdio.h>
63 #include <stdarg.h>
64 #include <errno.h>
65 #include <pwd.h>
66 #include <grp.h>
67 #include <signal.h>
68 #include <netdb.h>
69 #include <syslog.h>
70 #include <fcntl.h>
71 #include <ctype.h>
72 #include <locale.h>
73 
74 #include <sys/resource.h>
75 #include <sys/filio.h>
76 #include <shadow.h>
77 #include <stdlib.h>
78 
79 #include <security/pam_appl.h>
80 
81 #include <k5-int.h>
82 #include <krb5_repository.h>
83 #include <com_err.h>
84 #include <kcmd.h>
85 
86 #ifndef NCARGS
87 #define	NCARGS	5120
88 #endif /* !NCARGS */
89 
90 static void error(char *, ...);
91 static void doit(int, struct sockaddr_storage *, char **);
92 static void getstr(int, char *, int, char *);
93 
94 static int legalenvvar(char *);
95 static void add_to_envinit(char *);
96 static int locale_envmatch(char *, char *);
97 
98 /* Function decls. for functions not in any header file.  (Grrrr.) */
99 extern int audit_rshd_setup(void);
100 extern int audit_rshd_success(char *, char *, char *, char *);
101 extern int audit_rshd_fail(char *, char *, char *, char *, char *);
102 extern int audit_settid(int);
103 
104 static int do_encrypt = 0;
105 static pam_handle_t *pamh;
106 
107 /*
108  * This is the shell/kshell daemon. The very basic protocol for checking
109  * authentication and authorization is:
110  * 1) Check authentication.
111  * 2) Check authorization via the access-control files:
112  *    ~/.k5login (using krb5_kuserok) and/or
113  * Execute command if configured authoriztion checks pass, else deny
114  * permission.
115  *
116  * The configuration is done either by command-line arguments passed by inetd,
117  * or by the name of the daemon. If command-line arguments are present, they
118  * take priority. The options are:
119  * -k allow kerberos authentication (krb5 only; krb4 support is not provided)
120  * -5 same as `-k', mainly for compatability with MIT
121  * -e allow encrypted session
122  * -c demand authenticator checksum
123  * -i ignore authenticator checksum
124  * -U Refuse connections that cannot be mapped to a name via `gethostbyname'
125  * -s <tos>	Set the IP TOS option
126  * -S <keytab>	Set the keytab file to use
127  * -M <realm>	Set the Kerberos realm to use
128  */
129 
130 #define	ARGSTR	"ek5ciUD:M:S:L:?:"
131 #define	RSHD_BUFSIZ	(50 * 1024)
132 
133 static krb5_context bsd_context;
134 static krb5_keytab keytab = NULL;
135 static krb5_ccache ccache = NULL;
136 static krb5_keyblock *sessionkey = NULL;
137 
138 static int require_encrypt = 0;
139 static int resolve_hostname = 0;
140 static int krb5auth_flag = 0;	/* Flag set, when KERBEROS is enabled */
141 static enum kcmd_proto kcmd_protocol;
142 
143 #ifdef DEBUG
144 static int debug_port = 0;
145 #endif /* DEBUG */
146 
147 /*
148  * There are two authentication related masks:
149  * auth_ok and auth_sent.
150  * The auth_ok mask is the or'ing of authentication
151  * systems any one of which can be used.
152  * The auth_sent mask is the or'ing of one or more authentication/authorization
153  * systems that succeeded.  If the and'ing
154  * of these two masks is true, then authorization is successful.
155  */
156 
157 #define	AUTH_KRB5	(0x2)
158 static int auth_ok = 0;
159 static int auth_sent = 0;
160 static int checksum_required = 0;
161 static int checksum_ignored = 0;
162 
163 /*
164  * Leave room for 4 environment variables to be passed.
165  * The "-L env_var" option has been added primarily to
166  * maintain compatability with MIT.
167  */
168 #define	MAXENV	4
169 static char *save_env[MAXENV];
170 static int num_env = 0;
171 
172 static void usage(void);
173 static krb5_error_code recvauth(int, int *);
174 
175 /*ARGSUSED*/
176 int
177 main(int argc, char **argv, char **renvp)
178 {
179 	struct linger linger;
180 	int on = 1, fromlen;
181 	struct sockaddr_storage from;
182 	int fd = 0;
183 
184 	extern int opterr, optind;
185 	extern char *optarg;
186 	int ch;
187 	int tos = -1;
188 	krb5_error_code status;
189 
190 	openlog("rsh", LOG_PID | LOG_ODELAY, LOG_DAEMON);
191 	(void) audit_rshd_setup();	/* BSM */
192 	fromlen = sizeof (from);
193 
194 	(void) setlocale(LC_ALL, "");
195 
196 	/*
197 	 * Analyze parameters.
198 	 */
199 	opterr = 0;
200 	while ((ch = getopt(argc, argv, ARGSTR)) != EOF)
201 		switch (ch) {
202 		case '5':
203 		case 'k':
204 			auth_ok |= AUTH_KRB5;
205 			krb5auth_flag++;
206 			break;
207 
208 		case 'c':
209 			checksum_required = 1;
210 			krb5auth_flag++;
211 			break;
212 		case 'i':
213 			checksum_ignored = 1;
214 			krb5auth_flag++;
215 			break;
216 
217 		case 'e':
218 			require_encrypt = 1;
219 			krb5auth_flag++;
220 			break;
221 #ifdef DEBUG
222 		case 'D':
223 			debug_port = atoi(optarg);
224 			break;
225 #endif /* DEBUG */
226 		case 'U':
227 			resolve_hostname = 1;
228 			break;
229 
230 		case 'M':
231 			krb5_set_default_realm(bsd_context, optarg);
232 			krb5auth_flag++;
233 			break;
234 
235 		case 'S':
236 			if ((status = krb5_kt_resolve(bsd_context, optarg,
237 				&keytab))) {
238 				com_err("rsh", status,
239 					gettext("while resolving "
240 						"srvtab file %s"), optarg);
241 				exit(2);
242 			}
243 			krb5auth_flag++;
244 			break;
245 
246 		case 's':
247 			if (optarg == NULL || ((tos = atoi(optarg)) < 0) ||
248 				(tos > 255)) {
249 				syslog(LOG_ERR, "rshd: illegal tos value: "
250 				    "%s\n", optarg);
251 			}
252 			break;
253 
254 		case 'L':
255 			if (num_env < MAXENV) {
256 				save_env[num_env] = strdup(optarg);
257 				if (!save_env[num_env++]) {
258 					com_err("rsh", ENOMEM,
259 						gettext("in saving env"));
260 					exit(2);
261 				}
262 			} else {
263 				(void) fprintf(stderr, gettext("rshd: Only %d"
264 						" -L arguments allowed\n"),
265 						MAXENV);
266 				exit(2);
267 			}
268 			break;
269 
270 		case '?':
271 		default:
272 			usage();
273 			exit(1);
274 			break;
275 		}
276 
277 	if (optind == 0) {
278 		usage();
279 		exit(1);
280 	}
281 	argc -= optind;
282 	argv += optind;
283 
284 	if (krb5auth_flag > 0) {
285 		status = krb5_init_context(&bsd_context);
286 		if (status) {
287 			syslog(LOG_ERR, "Error initializing krb5: %s",
288 			    error_message(status));
289 			exit(1);
290 		}
291 	}
292 
293 	if (!checksum_required && !checksum_ignored)
294 		checksum_ignored = 1;
295 
296 	if (checksum_required && checksum_ignored) {
297 		syslog(LOG_CRIT, gettext("Checksums are required and ignored."
298 		"These options are mutually exclusive"
299 		"--check the documentation."));
300 		error("Configuration error: mutually exclusive "
301 				"options specified.\n");
302 		exit(1);
303 	}
304 
305 #ifdef DEBUG
306 	if (debug_port) {
307 		int s;
308 		struct sockaddr_in sin;
309 
310 		if ((s = socket(AF_INET, SOCK_STREAM, PF_UNSPEC)) < 0) {
311 			fprintf(stderr, gettext("Error in socket: %s\n"),
312 					strerror(errno));
313 			exit(2);
314 		}
315 		(void) memset((char *)&sin, 0, sizeof (sin));
316 		sin.sin_family = AF_INET;
317 		sin.sin_port = htons(debug_port);
318 		sin.sin_addr.s_addr = INADDR_ANY;
319 
320 		(void) setsockopt(s, SOL_SOCKET, SO_REUSEADDR,
321 			(char *)&on, sizeof (on));
322 
323 		if ((bind(s, (struct sockaddr *)&sin, sizeof (sin))) < 0) {
324 			(void) fprintf(stderr, gettext("Error in bind: %s\n"),
325 					strerror(errno));
326 			exit(2);
327 		}
328 		if ((listen(s, 5)) < 0) {
329 			(void) fprintf(stderr, gettext("Error in listen: %s\n"),
330 					strerror(errno));
331 			exit(2);
332 		}
333 		if ((fd = accept(s, (struct sockaddr *)&from,
334 					&fromlen)) < 0) {
335 			(void) fprintf(stderr, gettext("Error in accept: %s\n"),
336 					strerror(errno));
337 			exit(2);
338 		}
339 		(void) close(s);
340 	}
341 	else
342 #endif /* DEBUG */
343 	{
344 		if (getpeername(STDIN_FILENO, (struct sockaddr *)&from,
345 				(socklen_t *)&fromlen) < 0) {
346 			(void) fprintf(stderr, "rshd: ");
347 			perror("getpeername");
348 			_exit(1);
349 		}
350 		fd = STDIN_FILENO;
351 	}
352 
353 	if (audit_settid(fd) != 0) {
354 		perror("settid");
355 		exit(1);
356 	}
357 
358 	if (setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, (char *)&on,
359 	    sizeof (on)) < 0)
360 		syslog(LOG_WARNING, "setsockopt (SO_KEEPALIVE): %m");
361 	linger.l_onoff = 1;
362 	linger.l_linger = 60;			/* XXX */
363 	if (setsockopt(fd, SOL_SOCKET, SO_LINGER, (char *)&linger,
364 	    sizeof (linger)) < 0)
365 		syslog(LOG_WARNING, "setsockopt (SO_LINGER): %m");
366 
367 	if ((tos != -1) && (setsockopt(fd, IPPROTO_IP, IP_TOS, (char *)&tos,
368 				sizeof (tos)) < 0) &&
369 				(errno != ENOPROTOOPT)) {
370 		syslog(LOG_ERR, "setsockopt (IP_TOS %d): %m");
371 	}
372 
373 	doit(dup(fd), &from, renvp);
374 	return (0);
375 }
376 
377 /*
378  * locale environments to be passed to shells.
379  */
380 static char *localeenv[] = {
381 	"LANG",
382 	"LC_CTYPE", "LC_NUMERIC", "LC_TIME", "LC_COLLATE",
383 	"LC_MONETARY", "LC_MESSAGES", "LC_ALL", NULL};
384 
385 /*
386  * The following is for the environment variable list
387  * used in the call to execle().  envinit is declared here,
388  * but populated after the call to getpwnam().
389  */
390 static char	*homedir;	/* "HOME=" */
391 static char	*shell;		/* "SHELL=" */
392 static char	*username;	/* "USER=" */
393 static char	*tz;		/* "TZ=" */
394 
395 static char	homestr[] = "HOME=";
396 static char	shellstr[] = "SHELL=";
397 static char	userstr[] = "USER=";
398 static char	tzstr[] = "TZ=";
399 
400 static char	**envinit;
401 #define	PAM_ENV_ELIM	16	/* allow 16 PAM environment variables */
402 #define	USERNAME_LEN	16	/* maximum number of characters in user name */
403 
404 /*
405  *	See PSARC opinion 1992/025
406  */
407 static char	userpath[] = "PATH=/usr/bin:";
408 static char	rootpath[] = "PATH=/usr/sbin:/usr/bin";
409 
410 static char cmdbuf[NCARGS+1];
411 static char hostname [MAXHOSTNAMELEN + 1];
412 static char locuser[USERNAME_LEN + 1];
413 static char remuser[USERNAME_LEN + 1];
414 
415 #define	KRB5_RECVAUTH_V5	5
416 #define	SIZEOF_INADDR sizeof	(struct in_addr)
417 
418 #define	MAX_REPOSITORY_LEN	255
419 static char repository[MAX_REPOSITORY_LEN];
420 
421 static char *kremuser;
422 static krb5_principal client = NULL;
423 
424 static char	remote_addr[64];
425 static char	local_addr[64];
426 
427 static void
428 doit(int f, struct sockaddr_storage *fromp, char **renvp)
429 {
430 	char *cp;
431 
432 	struct passwd *pwd;
433 	char *path;
434 	char *tzenv;
435 	struct spwd *shpwd;
436 	struct stat statb;
437 	char **lenvp;
438 
439 	krb5_error_code status;
440 	int valid_checksum;
441 	int cnt;
442 	int sin_len;
443 	struct sockaddr_in localaddr;
444 
445 	int s;
446 	in_port_t port;
447 	pid_t pid;
448 	int pv[2], pw[2], px[2], cc;
449 	char buf[RSHD_BUFSIZ];
450 	char sig;
451 	int one = 1;
452 	int v = 0;
453 	int err = 0;
454 	int idx = 0;
455 	char **pam_env;
456 	char abuf[INET6_ADDRSTRLEN];
457 	struct sockaddr_in *sin;
458 	struct sockaddr_in6 *sin6;
459 	int fromplen;
460 	int homedir_len, shell_len, username_len, tz_len;
461 	int no_name;
462 	int bad_port;
463 	int netf = 0;
464 
465 	(void) signal(SIGINT, SIG_DFL);
466 	(void) signal(SIGQUIT, SIG_DFL);
467 	(void) signal(SIGTERM, SIG_DFL);
468 	(void) signal(SIGXCPU, SIG_DFL);
469 	(void) signal(SIGXFSZ, SIG_DFL);
470 	(void) sigset(SIGCHLD, SIG_IGN);
471 	(void) signal(SIGPIPE, SIG_DFL);
472 	(void) signal(SIGHUP, SIG_DFL);
473 
474 #ifdef DEBUG
475 	{ int t = open("/dev/tty", 2);
476 	    if (t >= 0) {
477 		(void) setsid();
478 		(void) close(t);
479 	    }
480 	}
481 #endif
482 	if (fromp->ss_family == AF_INET) {
483 		sin = (struct sockaddr_in *)fromp;
484 		port = ntohs((ushort_t)sin->sin_port);
485 		fromplen = sizeof (struct sockaddr_in);
486 	} else if (fromp->ss_family == AF_INET6) {
487 		sin6 = (struct sockaddr_in6 *)fromp;
488 		port = ntohs((ushort_t)sin6->sin6_port);
489 		fromplen = sizeof (struct sockaddr_in6);
490 	} else {
491 		syslog(LOG_ERR, "wrong address family\n");
492 		exit(1);
493 	}
494 
495 	sin_len = sizeof (struct sockaddr_in);
496 	if (getsockname(f, (struct sockaddr *)&localaddr,
497 			&sin_len) < 0) {
498 		perror("getsockname");
499 		exit(1);
500 	}
501 
502 	netf = f;
503 
504 	bad_port = (port >= IPPORT_RESERVED ||
505 		port < (uint_t)(IPPORT_RESERVED/2));
506 
507 	no_name = (getnameinfo((const struct sockaddr *) fromp, fromplen,
508 		hostname, sizeof (hostname), NULL, 0, 0) != 0);
509 
510 	/* Get the name of the client side host to use later */
511 	if (no_name == 1 || bad_port == 1) {
512 		if (no_name != 0) {
513 			/*
514 			 * If the '-U' option was given on the cmd line,
515 			 * we must be able to lookup the hostname
516 			 */
517 			if (resolve_hostname) {
518 				syslog(LOG_ERR, "rshd: Couldn't resolve your "
519 					"address into a host name.\r\n Please "
520 					"contact your net administrator");
521 				exit(1);
522 			} else {
523 				/*
524 				 * If there is no host name available and the
525 				 * -U option hasnt been used on the cmd line,
526 				 * use the IP address to identify the
527 				 * host in the pam call below.
528 				 */
529 				(void) strncpy(hostname, abuf,
530 						sizeof (hostname));
531 			}
532 		}
533 
534 		if (fromp->ss_family == AF_INET6) {
535 			if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) {
536 				struct in_addr ipv4_addr;
537 
538 				IN6_V4MAPPED_TO_INADDR(&sin6->sin6_addr,
539 				    &ipv4_addr);
540 				(void) inet_ntop(AF_INET, &ipv4_addr, abuf,
541 					    sizeof (abuf));
542 			} else {
543 				(void) inet_ntop(AF_INET6, &sin6->sin6_addr,
544 					    abuf, sizeof (abuf));
545 			}
546 		} else if (fromp->ss_family == AF_INET) {
547 			(void) inet_ntop(AF_INET, &sin->sin_addr,
548 				    abuf, sizeof (abuf));
549 		}
550 	}
551 
552 	if (!krb5auth_flag && bad_port) {
553 		if (no_name)
554 			syslog(LOG_NOTICE, "connection from %s - "
555 			    "bad port\n", abuf);
556 		else
557 			syslog(LOG_NOTICE, "connection from %s (%s) - "
558 			    "bad port\n", hostname, abuf);
559 		exit(1);
560 	}
561 
562 	(void) alarm(60);
563 	port = 0;
564 	for (;;) {
565 		char c;
566 		if ((cc = read(f, &c, 1)) != 1) {
567 			if (cc < 0)
568 				syslog(LOG_NOTICE, "read: %m");
569 			(void) shutdown(f, 1+1);
570 			exit(1);
571 		}
572 		if (c == 0)
573 			break;
574 		port = port * 10 + c - '0';
575 	}
576 	(void) alarm(0);
577 	if (port != 0) {
578 		int lport = 0;
579 		struct sockaddr_storage ctl_addr;
580 		int addrlen;
581 
582 		(void) memset(&ctl_addr, 0, sizeof (ctl_addr));
583 		addrlen = sizeof (ctl_addr);
584 		if (getsockname(f, (struct sockaddr *)&ctl_addr,
585 			&addrlen) < 0) {
586 			syslog(LOG_ERR, "getsockname: %m");
587 			exit(1);
588 		}
589 get_port:
590 		/*
591 		 * 0 means that rresvport_addr() will bind to a port in
592 		 * the anonymous priviledged port range.
593 		 */
594 		if (krb5auth_flag) {
595 			/*
596 			 * Kerberos does not support IPv6 yet.
597 			 */
598 			lport = IPPORT_RESERVED - 1;
599 		}
600 		s = rresvport_addr(&lport, &ctl_addr);
601 
602 		if (s < 0) {
603 			syslog(LOG_ERR, "can't get stderr port: %m");
604 			exit(1);
605 		}
606 		if (!krb5auth_flag && (port >= IPPORT_RESERVED)) {
607 			syslog(LOG_ERR, "2nd port not reserved\n");
608 			exit(1);
609 		}
610 		if (fromp->ss_family == AF_INET) {
611 			sin->sin_port = htons((ushort_t)port);
612 		} else if (fromp->ss_family == AF_INET6) {
613 			sin6->sin6_port = htons((ushort_t)port);
614 		}
615 		if (connect(s, (struct sockaddr *)fromp, fromplen) < 0) {
616 			if (errno == EADDRINUSE) {
617 				(void) close(s);
618 				goto get_port;
619 			}
620 			syslog(LOG_INFO, "connect second port: %m");
621 			exit(1);
622 		}
623 	}
624 	(void) dup2(f, 0);
625 	(void) dup2(f, 1);
626 	(void) dup2(f, 2);
627 
628 #ifdef DEBUG
629 	syslog(LOG_NOTICE, "rshd: Client hostname = %s", hostname);
630 	if (debug_port)
631 		syslog(LOG_NOTICE, "rshd: Debug port is %d", debug_port);
632 	if (krb5auth_flag > 0)
633 		syslog(LOG_NOTICE, "rshd: Kerberos mode is ON");
634 	else
635 		syslog(LOG_NOTICE, "rshd: Kerberos mode is OFF");
636 #endif /* DEBUG */
637 
638 	if (krb5auth_flag > 0) {
639 		if ((status = recvauth(f, &valid_checksum))) {
640 			syslog(LOG_ERR, gettext("Kerberos Authentication "
641 					"failed \n"));
642 			error("Authentication failed: %s\n",
643 					error_message(status));
644 			(void) audit_rshd_fail("Kerberos Authentication "
645 				"failed", hostname, remuser, locuser, cmdbuf);
646 			exit(1);
647 		}
648 
649 		if (checksum_required && !valid_checksum &&
650 			kcmd_protocol == KCMD_OLD_PROTOCOL) {
651 			syslog(LOG_WARNING, "Client did not supply required"
652 					" checksum--connection rejected.");
653 			error("Client did not supply required"
654 				"checksum--connection rejected.\n");
655 			(void) audit_rshd_fail("Client did not supply required"
656 				" checksum--connection rejected.", hostname,
657 				remuser, locuser, cmdbuf);	/* BSM */
658 			goto signout;
659 		}
660 
661 		/*
662 		 * Authentication has succeeded, we now need
663 		 * to check authorization.
664 		 *
665 		 * krb5_kuserok returns 1 if OK.
666 		 */
667 		if (client && krb5_kuserok(bsd_context, client, locuser)) {
668 			auth_sent |= AUTH_KRB5;
669 		} else {
670 			syslog(LOG_ERR, "Principal %s (%s@%s) for local user "
671 				"%s failed krb5_kuserok.\n",
672 				kremuser, remuser, hostname, locuser);
673 		}
674 	} else {
675 		getstr(netf, remuser, sizeof (remuser), "remuser");
676 		getstr(netf, locuser, sizeof (locuser), "locuser");
677 		getstr(netf, cmdbuf, sizeof (cmdbuf), "command");
678 	}
679 
680 #ifdef DEBUG
681 	syslog(LOG_NOTICE, "rshd: locuser = %s, remuser = %s, cmdbuf = %s",
682 			locuser, remuser, cmdbuf);
683 #endif /* DEBUG */
684 
685 	/*
686 	 * Note that there is no rsh conv functions at present.
687 	 */
688 	if (krb5auth_flag > 0) {
689 		if ((err = pam_start("krsh", locuser, NULL, &pamh))
690 				!= PAM_SUCCESS) {
691 			syslog(LOG_ERR, "pam_start() failed: %s\n",
692 				pam_strerror(0, err));
693 			exit(1);
694 		}
695 	}
696 	else
697 	{
698 		if ((err = pam_start("rsh", locuser, NULL, &pamh))
699 				!= PAM_SUCCESS) {
700 			syslog(LOG_ERR, "pam_start() failed: %s\n",
701 				pam_strerror(0, err));
702 			exit(1);
703 		}
704 	}
705 	if ((err = pam_set_item(pamh, PAM_RHOST, hostname)) != PAM_SUCCESS) {
706 		syslog(LOG_ERR, "pam_set_item() failed: %s\n",
707 			pam_strerror(pamh, err));
708 		exit(1);
709 	}
710 	if ((err = pam_set_item(pamh, PAM_RUSER, remuser)) != PAM_SUCCESS) {
711 		syslog(LOG_ERR, "pam_set_item() failed: %s\n",
712 			pam_strerror(pamh, err));
713 		exit(1);
714 	}
715 
716 	pwd = getpwnam(locuser);
717 	shpwd = getspnam(locuser);
718 	if ((pwd == NULL) || (shpwd == NULL)) {
719 		if (krb5auth_flag > 0)
720 			syslog(LOG_ERR, "Principal %s (%s@%s) for local user "
721 				"%s has no account.\n", kremuser, remuser,
722 							hostname, locuser);
723 		error("permission denied.\n");
724 		(void) audit_rshd_fail("Login incorrect", hostname,
725 			remuser, locuser, cmdbuf);	/* BSM */
726 		exit(1);
727 	}
728 
729 	if (krb5auth_flag > 0) {
730 		(void) snprintf(repository, sizeof (repository),
731 					KRB5_REPOSITORY_NAME);
732 		/*
733 		 * We currently only support special handling of the
734 		 * KRB5 PAM repository
735 		 */
736 		if (strlen(locuser) != 0) {
737 			krb5_repository_data_t krb5_data;
738 			pam_repository_t pam_rep_data;
739 
740 			krb5_data.principal = locuser;
741 			krb5_data.flags = SUNW_PAM_KRB5_ALREADY_AUTHENTICATED;
742 
743 			pam_rep_data.type = repository;
744 			pam_rep_data.scope = (void *)&krb5_data;
745 			pam_rep_data.scope_len = sizeof (krb5_data);
746 
747 			(void) pam_set_item(pamh, PAM_REPOSITORY,
748 					(void *)&pam_rep_data);
749 		}
750 	}
751 
752 	/*
753 	 * maintain 2.1 and 4.* and BSD semantics with anonymous rshd
754 	 */
755 	if (shpwd->sp_pwdp != 0 && *shpwd->sp_pwdp != '\0' &&
756 	    (v = pam_authenticate(pamh, 0)) != PAM_SUCCESS) {
757 		error("permission denied\n");
758 		(void) audit_rshd_fail("Permission denied", hostname,
759 			remuser, locuser, cmdbuf);	/* BSM */
760 		(void) pam_end(pamh, v);
761 		exit(1);
762 	}
763 
764 	if (krb5auth_flag > 0) {
765 		if (require_encrypt && (!do_encrypt)) {
766 			error("You must use encryption.\n");
767 			(void) audit_rshd_fail("You must use encryption.",
768 				hostname, remuser, locuser, cmdbuf); /* BSM */
769 			goto signout;
770 		}
771 
772 		if (!(auth_ok & auth_sent)) {
773 			if (auth_sent) {
774 				error("Another authentication mechanism "
775 				    "must be used to access this host.\n");
776 				(void) audit_rshd_fail("Another authentication"
777 					" mechanism must be used to access"
778 					" this host.\n", hostname, remuser,
779 					locuser, cmdbuf); /* BSM */
780 				goto signout;
781 			} else {
782 				error("Permission denied.\n");
783 				(void) audit_rshd_fail("Permission denied.",
784 					hostname, remuser, locuser, cmdbuf);
785 					/* BSM */
786 				goto signout;
787 			}
788 		}
789 
790 
791 		if (pwd->pw_uid && !access("/etc/nologin", F_OK)) {
792 			error("Logins currently disabled.\n");
793 			(void) audit_rshd_fail("Logins currently disabled.",
794 				hostname, remuser, locuser, cmdbuf);
795 			goto signout;
796 		}
797 
798 		/* Log access to account */
799 		if (pwd && (pwd->pw_uid == 0)) {
800 			syslog(LOG_NOTICE, "Executing %s for user %s (%s@%s)"
801 			    " as ROOT", cmdbuf,
802 			    kremuser, remuser, hostname);
803 		}
804 	}
805 
806 	if ((v = pam_acct_mgmt(pamh, 0)) != PAM_SUCCESS) {
807 		switch (v) {
808 		case PAM_NEW_AUTHTOK_REQD:
809 			error("password expired\n");
810 			(void) audit_rshd_fail("Password expired", hostname,
811 				remuser, locuser, cmdbuf); /* BSM */
812 			break;
813 		case PAM_PERM_DENIED:
814 			error("account expired\n");
815 			(void) audit_rshd_fail("Account expired", hostname,
816 				remuser, locuser, cmdbuf); /* BSM */
817 			break;
818 		case PAM_AUTHTOK_EXPIRED:
819 			error("password expired\n");
820 			(void) audit_rshd_fail("Password expired", hostname,
821 				remuser, locuser, cmdbuf); /* BSM */
822 			break;
823 		default:
824 			error("login incorrect\n");
825 			(void) audit_rshd_fail("Permission denied", hostname,
826 				remuser, locuser, cmdbuf); /* BSM */
827 			break;
828 		}
829 		(void) pam_end(pamh, PAM_ABORT);
830 		exit(1);
831 	}
832 
833 	if (chdir(pwd->pw_dir) < 0) {
834 		(void) chdir("/");
835 #ifdef notdef
836 		error("No remote directory.\n");
837 
838 		exit(1);
839 #endif
840 	}
841 
842 	/*
843 	 * XXX There is no session management currently being done
844 	 */
845 
846 	(void) write(STDERR_FILENO, "\0", 1);
847 	if (port || do_encrypt) {
848 		if ((pipe(pv) < 0)) {
849 			error("Can't make pipe.\n");
850 			(void) pam_end(pamh, PAM_ABORT);
851 			exit(1);
852 		}
853 		if (do_encrypt) {
854 			if (pipe(pw) < 0) {
855 				error("Can't make pipe 2.\n");
856 				(void) pam_end(pamh, PAM_ABORT);
857 				exit(1);
858 			}
859 			if (pipe(px) < 0) {
860 				error("Can't make pipe 3.\n");
861 				(void) pam_end(pamh, PAM_ABORT);
862 				exit(1);
863 			}
864 		}
865 		pid = fork();
866 		if (pid == (pid_t)-1)  {
867 			error("Fork (to start shell) failed on server.  "
868 				"Please try again later.\n");
869 			(void) pam_end(pamh, PAM_ABORT);
870 			exit(1);
871 		}
872 		if (pid) {
873 			fd_set ready;
874 			fd_set readfrom;
875 
876 			(void) close(STDIN_FILENO);
877 			(void) close(STDOUT_FILENO);
878 			(void) close(STDERR_FILENO);
879 			(void) close(pv[1]);
880 			if (do_encrypt) {
881 				(void) close(pw[1]);
882 				(void) close(px[0]);
883 			} else {
884 				(void) close(f);
885 			}
886 
887 			(void) FD_ZERO(&readfrom);
888 
889 			FD_SET(pv[0], &readfrom);
890 			if (do_encrypt) {
891 				FD_SET(pw[0], &readfrom);
892 				FD_SET(f, &readfrom);
893 			}
894 			if (port)
895 				FD_SET(s, &readfrom);
896 
897 			/* read f (net), write to px[1] (child stdin) */
898 			/* read pw[0] (child stdout), write to f (net) */
899 			/* read s (alt. channel), signal child */
900 			/* read pv[0] (child stderr), write to s */
901 			if (ioctl(pv[0], FIONBIO, (char *)&one) == -1)
902 				syslog(LOG_INFO, "ioctl FIONBIO: %m");
903 			if (do_encrypt &&
904 				ioctl(pw[0], FIONBIO, (char *)&one) == -1)
905 				syslog(LOG_INFO, "ioctl FIONBIO: %m");
906 			do {
907 				ready = readfrom;
908 				if (select(FD_SETSIZE, &ready, NULL,
909 					NULL, NULL) < 0) {
910 					if (errno == EINTR) {
911 						continue;
912 					} else {
913 						break;
914 					}
915 				}
916 				/*
917 				 * Read from child stderr, write to net
918 				 */
919 				if (port && FD_ISSET(pv[0], &ready)) {
920 					errno = 0;
921 					cc = read(pv[0], buf, sizeof (buf));
922 					if (cc <= 0) {
923 						(void) shutdown(s, 2);
924 						FD_CLR(pv[0], &readfrom);
925 					} else {
926 						(void) deswrite(s, buf, cc, 1);
927 					}
928 				}
929 				/*
930 				 * Read from alternate channel, signal child
931 				 */
932 				if (port && FD_ISSET(s, &ready)) {
933 					if ((int)desread(s, &sig, 1, 1) <= 0)
934 						FD_CLR(s, &readfrom);
935 					else
936 						(void) killpg(pid, sig);
937 				}
938 				/*
939 				 * Read from child stdout, write to net
940 				 */
941 				if (do_encrypt && FD_ISSET(pw[0], &ready)) {
942 					errno = 0;
943 					cc = read(pw[0], buf, sizeof (buf));
944 					if (cc <= 0) {
945 						(void) shutdown(f, 2);
946 						FD_CLR(pw[0], &readfrom);
947 					} else {
948 						(void) deswrite(f, buf, cc, 0);
949 					}
950 				}
951 				/*
952 				 * Read from the net, write to child stdin
953 				 */
954 				if (do_encrypt && FD_ISSET(f, &ready)) {
955 					errno = 0;
956 					cc = desread(f, buf, sizeof (buf), 0);
957 					if (cc <= 0) {
958 						(void) close(px[1]);
959 						FD_CLR(f, &readfrom);
960 					} else {
961 						int wcc;
962 						wcc = write(px[1], buf, cc);
963 						if (wcc == -1) {
964 							/*
965 							 * pipe closed,
966 							 * don't read any
967 							 * more
968 							 *
969 							 * might check for
970 							 * EPIPE
971 							 */
972 						    (void) close(px[1]);
973 						    FD_CLR(f, &readfrom);
974 						} else if (wcc != cc) {
975 						    /* CSTYLED */
976 						    syslog(LOG_INFO, gettext("only wrote %d/%d to child"),
977 						    wcc, cc);
978 						}
979 					}
980 				}
981 			} while ((port && FD_ISSET(s, &readfrom)) ||
982 				(port && FD_ISSET(pv[0], &readfrom)) ||
983 				(do_encrypt && FD_ISSET(f, &readfrom)) ||
984 				(do_encrypt && FD_ISSET(pw[0], &readfrom)));
985 #ifdef DEBUG
986 			syslog(LOG_INFO, "Shell process completed.");
987 #endif /* DEBUG */
988 			if (ccache)
989 				(void) pam_close_session(pamh, 0);
990 			(void) pam_end(pamh, PAM_SUCCESS);
991 
992 			exit(0);
993 		} /* End of Parent block */
994 
995 		(void) setsid();	/* Should be the same as above. */
996 		(void) close(pv[0]);
997 		(void) dup2(pv[1], 2);
998 		(void) close(pv[1]);
999 		if (port)
1000 			(void) close(s);
1001 		if (do_encrypt) {
1002 			(void) close(f);
1003 			(void) close(pw[0]);
1004 			(void) close(px[1]);
1005 
1006 			(void) dup2(px[0], 0);
1007 			(void) dup2(pw[1], 1);
1008 
1009 			(void) close(px[0]);
1010 			(void) close(pw[1]);
1011 		}
1012 	}
1013 
1014 	if (*pwd->pw_shell == '\0')
1015 		pwd->pw_shell = "/bin/sh";
1016 	if (!do_encrypt)
1017 		(void) close(f);
1018 	/*
1019 	 * write audit record before making uid switch
1020 	 */
1021 	(void) audit_rshd_success(hostname, remuser, locuser, cmdbuf); /* BSM */
1022 
1023 	/* set the real (and effective) GID */
1024 	if (setgid(pwd->pw_gid) == -1) {
1025 		error("Invalid gid.\n");
1026 		(void) pam_end(pamh, PAM_ABORT);
1027 		exit(1);
1028 	}
1029 
1030 	/*
1031 	 * Initialize the supplementary group access list.
1032 	 */
1033 	if (strlen(locuser) == 0) {
1034 		error("No local user.\n");
1035 		(void) pam_end(pamh, PAM_ABORT);
1036 		exit(1);
1037 	}
1038 	if (initgroups(locuser, pwd->pw_gid) == -1) {
1039 		error("Initgroup failed.\n");
1040 		(void) pam_end(pamh, PAM_ABORT);
1041 		exit(1);
1042 	}
1043 
1044 	if ((v = pam_setcred(pamh, PAM_ESTABLISH_CRED)) != PAM_SUCCESS) {
1045 		error("Insufficient credentials.\n");
1046 		(void) pam_end(pamh, v);
1047 		exit(1);
1048 	}
1049 
1050 	/* set the real (and effective) UID */
1051 	if (setuid(pwd->pw_uid) == -1) {
1052 		error("Invalid uid.\n");
1053 		(void) pam_end(pamh, PAM_ABORT);
1054 		exit(1);
1055 	}
1056 
1057 	/* Change directory only after becoming the appropriate user. */
1058 	if (chdir(pwd->pw_dir) < 0) {
1059 		(void) chdir("/");
1060 		if (krb5auth_flag > 0) {
1061 			syslog(LOG_ERR, "Principal %s  (%s@%s) for local user"
1062 				" %s has no home directory.",
1063 				kremuser, remuser, hostname, locuser);
1064 			error("No remote directory.\n");
1065 			goto signout;
1066 		}
1067 #ifdef notdef
1068 		error("No remote directory.\n");
1069 		exit(1);
1070 #endif
1071 	}
1072 
1073 	path = (pwd->pw_uid == 0) ? rootpath : userpath;
1074 
1075 	/*
1076 	 * Space for the following environment variables are dynamically
1077 	 * allocated because their lengths are not known before calling
1078 	 * getpwnam().
1079 	 */
1080 	homedir_len = strlen(pwd->pw_dir) + strlen(homestr) + 1;
1081 	shell_len = strlen(pwd->pw_shell) + strlen(shellstr) + 1;
1082 	username_len = strlen(pwd->pw_name) + strlen(userstr) + 1;
1083 	homedir = (char *)malloc(homedir_len);
1084 	shell = (char *)malloc(shell_len);
1085 	username = (char *)malloc(username_len);
1086 	if (homedir == NULL || shell == NULL || username == NULL) {
1087 		perror("malloc");
1088 		exit(1);
1089 	}
1090 	(void) snprintf(homedir, homedir_len, "%s%s", homestr, pwd->pw_dir);
1091 	(void) snprintf(shell, shell_len, "%s%s", shellstr, pwd->pw_shell);
1092 	(void) snprintf(username, username_len, "%s%s", userstr, pwd->pw_name);
1093 
1094 	/* Pass timezone to executed command. */
1095 	if (tzenv = getenv("TZ")) {
1096 		tz_len = strlen(tzenv) + strlen(tzstr) + 1;
1097 		tz = malloc(tz_len);
1098 		if (tz != NULL)
1099 			(void) snprintf(tz, tz_len, "%s%s", tzstr, tzenv);
1100 	}
1101 
1102 	add_to_envinit(homedir);
1103 	add_to_envinit(shell);
1104 	add_to_envinit(path);
1105 	add_to_envinit(username);
1106 	add_to_envinit(tz);
1107 
1108 	if (krb5auth_flag > 0) {
1109 		int length;
1110 		char *buffer;
1111 
1112 		/*
1113 		 * If we have KRB5CCNAME set, then copy into the child's
1114 		 * environment.  This can't really have a fixed position
1115 		 * because `tz' may or may not be set.
1116 		 */
1117 		if (getenv("KRB5CCNAME")) {
1118 			length = (int)strlen(getenv("KRB5CCNAME")) +
1119 					(int)strlen("KRB5CCNAME=") + 1;
1120 			buffer = (char *)malloc(length);
1121 
1122 			if (buffer) {
1123 				(void) snprintf(buffer, length, "KRB5CCNAME=%s",
1124 						getenv("KRB5CCNAME"));
1125 				add_to_envinit(buffer);
1126 			}
1127 		} {
1128 			/* These two are covered by ADDRPAD */
1129 			length = strlen(inet_ntoa(localaddr.sin_addr)) + 1 +
1130 					strlen("KRB5LOCALADDR=");
1131 			(void) snprintf(local_addr, length, "KRB5LOCALADDR=%s",
1132 				inet_ntoa(localaddr.sin_addr));
1133 			add_to_envinit(local_addr);
1134 
1135 			length = strlen(inet_ntoa(sin->sin_addr)) + 1 +
1136 					strlen("KRB5REMOTEADDR=");
1137 			(void) snprintf(remote_addr, length,
1138 				"KRB5REMOTEADDR=%s", inet_ntoa(sin->sin_addr));
1139 			add_to_envinit(remote_addr);
1140 		}
1141 
1142 		/*
1143 		 * If we do anything else, make sure there is
1144 		 * space in the array.
1145 		 */
1146 		for (cnt = 0; cnt < num_env; cnt++) {
1147 			char *buf;
1148 
1149 			if (getenv(save_env[cnt])) {
1150 				length = (int)strlen(getenv(save_env[cnt])) +
1151 					(int)strlen(save_env[cnt]) + 2;
1152 
1153 				buf = (char *)malloc(length);
1154 				if (buf) {
1155 					(void) snprintf(buf, length, "%s=%s",
1156 						save_env[cnt],
1157 						getenv(save_env[cnt]));
1158 					add_to_envinit(buf);
1159 				}
1160 			}
1161 		}
1162 
1163 	}
1164 
1165 	/*
1166 	 * add PAM environment variables set by modules
1167 	 * -- only allowed 16 (PAM_ENV_ELIM)
1168 	 * -- check to see if the environment variable is legal
1169 	 */
1170 	if ((pam_env = pam_getenvlist(pamh)) != 0) {
1171 		while (pam_env[idx] != 0) {
1172 			if (idx < PAM_ENV_ELIM &&
1173 			    legalenvvar(pam_env[idx])) {
1174 				add_to_envinit(pam_env[idx]);
1175 			}
1176 			idx++;
1177 		}
1178 	}
1179 
1180 	(void) pam_end(pamh, PAM_SUCCESS);
1181 
1182 	/*
1183 	 * Pick up locale environment variables, if any.
1184 	 */
1185 	lenvp = renvp;
1186 	while (*lenvp != NULL) {
1187 		int	index;
1188 
1189 		for (index = 0; localeenv[index] != NULL; index++)
1190 			/*
1191 			 * locale_envmatch() returns 1 if
1192 			 * *lenvp is localenev[index] and valid.
1193 			 */
1194 			if (locale_envmatch(localeenv[index], *lenvp)) {
1195 				add_to_envinit(*lenvp);
1196 				break;
1197 			}
1198 
1199 		lenvp++;
1200 	}
1201 
1202 	cp = strrchr(pwd->pw_shell, '/');
1203 	if (cp != NULL)
1204 		cp++;
1205 	else
1206 		cp = pwd->pw_shell;
1207 	/*
1208 	 * rdist has been moved to /usr/bin, so /usr/ucb/rdist might not
1209 	 * be present on a system.  So if it doesn't exist we fall back
1210 	 * and try for it in /usr/bin.  We take care to match the space
1211 	 * after the name because the only purpose of this is to protect
1212 	 * the internal call from old rdist's, not humans who type
1213 	 * "rsh foo /usr/ucb/rdist".
1214 	 */
1215 #define	RDIST_PROG_NAME	"/usr/ucb/rdist -Server"
1216 	if (strncmp(cmdbuf, RDIST_PROG_NAME, strlen(RDIST_PROG_NAME)) == 0) {
1217 		if (stat("/usr/ucb/rdist", &statb) != 0) {
1218 			(void) strncpy(cmdbuf + 5, "bin", 3);
1219 		}
1220 	}
1221 
1222 #ifdef DEBUG
1223 	syslog(LOG_NOTICE, "rshd: cmdbuf = %s", cmdbuf);
1224 	if (do_encrypt)
1225 		syslog(LOG_NOTICE, "rshd: cmd to be exec'ed = %s",
1226 			((char *)cmdbuf + 3));
1227 #endif /* DEBUG */
1228 
1229 	if (do_encrypt && (strncmp(cmdbuf, "-x ", 3) == 0)) {
1230 		(void) execle(pwd->pw_shell, cp, "-c", (char *)cmdbuf + 3,
1231 				NULL, envinit);
1232 	} else {
1233 		(void) execle(pwd->pw_shell, cp, "-c", cmdbuf, NULL,
1234 				envinit);
1235 	}
1236 
1237 	perror(pwd->pw_shell);
1238 	exit(1);
1239 
1240 signout:
1241 	if (ccache)
1242 		(void) pam_close_session(pamh, 0);
1243 	ccache = NULL;
1244 	(void) pam_end(pamh, PAM_ABORT);
1245 	exit(1);
1246 }
1247 
1248 static void
1249 getstr(fd, buf, cnt, err)
1250 	int fd;
1251 	char *buf;
1252 	int cnt;
1253 	char *err;
1254 {
1255 	char c;
1256 
1257 	do {
1258 		if (read(fd, &c, 1) != 1)
1259 			exit(1);
1260 		if (cnt-- == 0) {
1261 			error("%s too long\n", err);
1262 			exit(1);
1263 		}
1264 		*buf++ = c;
1265 	} while (c != 0);
1266 }
1267 
1268 /*PRINTFLIKE1*/
1269 static void
1270 error(char *fmt, ...)
1271 {
1272 	va_list ap;
1273 	char buf[RSHD_BUFSIZ];
1274 
1275 	buf[0] = 1;
1276 	va_start(ap, fmt);
1277 	(void) vsnprintf(&buf[1], sizeof (buf) - 1, fmt, ap);
1278 	va_end(ap);
1279 	(void) write(STDERR_FILENO, buf, strlen(buf));
1280 }
1281 
1282 static char *illegal[] = {
1283 	"SHELL=",
1284 	"HOME=",
1285 	"LOGNAME=",
1286 #ifndef NO_MAIL
1287 	"MAIL=",
1288 #endif
1289 	"CDPATH=",
1290 	"IFS=",
1291 	"PATH=",
1292 	"USER=",
1293 	"TZ=",
1294 	0
1295 };
1296 
1297 /*
1298  * legalenvvar - can PAM modules insert this environmental variable?
1299  */
1300 
1301 static int
1302 legalenvvar(char *s)
1303 {
1304 	register char **p;
1305 
1306 	for (p = illegal; *p; p++)
1307 		if (strncmp(s, *p, strlen(*p)) == 0)
1308 			return (0);
1309 
1310 	if (s[0] == 'L' && s[1] == 'D' && s[2] == '_')
1311 		return (0);
1312 
1313 	return (1);
1314 }
1315 
1316 /*
1317  * Add a string to the environment of the new process.
1318  */
1319 
1320 static void
1321 add_to_envinit(char *string)
1322 {
1323 	/*
1324 	 * Reserve space for 2 * 8 = 16 environment entries initially which
1325 	 * should be enough to avoid reallocation of "envinit" in most cases.
1326 	 */
1327 	static int	size = 8;
1328 	static int	index = 0;
1329 
1330 	if (string == NULL)
1331 		return;
1332 
1333 	if ((envinit == NULL) || (index == size)) {
1334 		size *= 2;
1335 		envinit = realloc(envinit, (size + 1) * sizeof (char *));
1336 		if (envinit == NULL) {
1337 			perror("malloc");
1338 			exit(1);
1339 		}
1340 	}
1341 
1342 	envinit[index++] = string;
1343 	envinit[index] = NULL;
1344 }
1345 
1346 /*
1347  * Check if lenv and penv matches or not.
1348  */
1349 static int
1350 locale_envmatch(char *lenv, char *penv)
1351 {
1352 	while ((*lenv == *penv) && (*lenv != '\0') && (*penv != '=')) {
1353 		lenv++;
1354 		penv++;
1355 	}
1356 
1357 	/*
1358 	 * '/' is eliminated for security reason.
1359 	 */
1360 	return ((*lenv == '\0' && *penv == '=' && *(penv + 1) != '/'));
1361 }
1362 
1363 #ifndef	KRB_SENDAUTH_VLEN
1364 #define	KRB_SENDAUTH_VLEN	8	/* length for version strings */
1365 #endif
1366 
1367 /* MUST be KRB_SENDAUTH_VLEN chars */
1368 #define	KRB_SENDAUTH_VERS	"AUTHV0.1"
1369 #define	SIZEOF_INADDR sizeof (struct in_addr)
1370 
1371 static krb5_error_code
1372 recvauth(int netf, int *valid_checksum)
1373 {
1374 	krb5_auth_context auth_context = NULL;
1375 	krb5_error_code status;
1376 	struct sockaddr_in laddr;
1377 	int len;
1378 	krb5_data inbuf;
1379 	krb5_authenticator *authenticator;
1380 	krb5_ticket *ticket;
1381 	krb5_rcache rcache;
1382 	krb5_data version;
1383 	krb5_encrypt_block eblock;	/* eblock for encrypt/decrypt */
1384 	krb5_data desinbuf;
1385 	krb5_data desoutbuf;
1386 	char des_inbuf[2 * RSHD_BUFSIZ];
1387 			/* needs to be > largest read size */
1388 	char des_outbuf[2 * RSHD_BUFSIZ + 4];
1389 			/* needs to be > largest write size */
1390 
1391 	*valid_checksum = 0;
1392 	len = sizeof (laddr);
1393 
1394 	if (getsockname(netf, (struct sockaddr *)&laddr, &len)) {
1395 		exit(1);
1396 	}
1397 
1398 	if (status = krb5_auth_con_init(bsd_context, &auth_context))
1399 		return (status);
1400 
1401 	if (status = krb5_auth_con_genaddrs(bsd_context, auth_context, netf,
1402 		KRB5_AUTH_CONTEXT_GENERATE_REMOTE_FULL_ADDR))
1403 		return (status);
1404 
1405 	status = krb5_auth_con_getrcache(bsd_context, auth_context, &rcache);
1406 	if (status)
1407 		return (status);
1408 
1409 	if (!rcache) {
1410 		krb5_principal server;
1411 
1412 		status = krb5_sname_to_principal(bsd_context, 0, 0,
1413 			KRB5_NT_SRV_HST, &server);
1414 		if (status)
1415 			return (status);
1416 
1417 		status = krb5_get_server_rcache(bsd_context,
1418 			krb5_princ_component(bsd_context, server, 0),
1419 			&rcache);
1420 		krb5_free_principal(bsd_context, server);
1421 		if (status)
1422 			return (status);
1423 
1424 		status = krb5_auth_con_setrcache(bsd_context, auth_context,
1425 							rcache);
1426 		if (status)
1427 			return (status);
1428 	}
1429 
1430 	status = krb5_recvauth_version(bsd_context, &auth_context, &netf,
1431 		NULL,		/* Specify daemon principal */
1432 		0,		/* no flags */
1433 		keytab,		/* normally NULL to use v5srvtab */
1434 		&ticket,	/* return ticket */
1435 		&version);	/* application version string */
1436 
1437 
1438 	if (status) {
1439 		getstr(netf, locuser, sizeof (locuser), "locuser");
1440 		getstr(netf, cmdbuf, sizeof (cmdbuf), "command");
1441 		getstr(netf, remuser, sizeof (locuser), "remuser");
1442 		return (status);
1443 	}
1444 	getstr(netf, locuser, sizeof (locuser), "locuser");
1445 	getstr(netf, cmdbuf, sizeof (cmdbuf), "command");
1446 
1447 	/* Must be V5  */
1448 
1449 	kcmd_protocol = KCMD_UNKNOWN_PROTOCOL;
1450 	if (version.length != 9 || version.data == NULL) {
1451 		syslog(LOG_ERR, "bad application version length");
1452 		error(gettext("bad application version length\n"));
1453 		exit(1);
1454 	}
1455 	if (strncmp(version.data, "KCMDV0.1", 9) == 0) {
1456 		kcmd_protocol = KCMD_OLD_PROTOCOL;
1457 	} else if (strncmp(version.data, "KCMDV0.2", 9) == 0) {
1458 		kcmd_protocol = KCMD_NEW_PROTOCOL;
1459 	} else {
1460 		syslog(LOG_ERR, "Unrecognized KCMD protocol (%s)",
1461 			(char *)version.data);
1462 		error(gettext("Unrecognized KCMD protocol (%s)"),
1463 			(char *)version.data);
1464 		exit(1);
1465 	}
1466 	getstr(netf, remuser, sizeof (locuser), "remuser");
1467 
1468 	if ((status = krb5_unparse_name(bsd_context, ticket->enc_part2->client,
1469 			&kremuser)))
1470 		return (status);
1471 
1472 	if ((status = krb5_copy_principal(bsd_context,
1473 				ticket->enc_part2->client, &client)))
1474 		return (status);
1475 
1476 
1477 	if (checksum_required && (kcmd_protocol == KCMD_OLD_PROTOCOL)) {
1478 		if ((status = krb5_auth_con_getauthenticator(bsd_context,
1479 			auth_context, &authenticator)))
1480 			return (status);
1481 
1482 		if (authenticator->checksum && checksum_required) {
1483 			struct sockaddr_in adr;
1484 			int adr_length = sizeof (adr);
1485 			int chksumsize = strlen(cmdbuf) + strlen(locuser) + 32;
1486 			krb5_data input;
1487 			krb5_keyblock key;
1488 
1489 			char *chksumbuf = (char *)malloc(chksumsize);
1490 
1491 			if (chksumbuf == 0)
1492 				goto error_cleanup;
1493 			if (getsockname(netf, (struct sockaddr *)&adr,
1494 					&adr_length) != 0)
1495 				goto error_cleanup;
1496 
1497 			(void) snprintf(chksumbuf, chksumsize, "%u:",
1498 					ntohs(adr.sin_port));
1499 			if (strlcat(chksumbuf, cmdbuf,
1500 					chksumsize) >= chksumsize) {
1501 				syslog(LOG_ERR, "cmd buffer too long.");
1502 				free(chksumbuf);
1503 				return (-1);
1504 			}
1505 			if (strlcat(chksumbuf, locuser,
1506 					chksumsize) >= chksumsize) {
1507 				syslog(LOG_ERR, "locuser too long.");
1508 				free(chksumbuf);
1509 				return (-1);
1510 			}
1511 
1512 			input.data = chksumbuf;
1513 			input.length = strlen(chksumbuf);
1514 			key.magic = ticket->enc_part2->session->magic;
1515 			key.enctype = ticket->enc_part2->session->enctype;
1516 			key.contents = ticket->enc_part2->session->contents;
1517 			key.length = ticket->enc_part2->session->length;
1518 
1519 			status = krb5_c_verify_checksum(bsd_context,
1520 			    &key, 0, &input, authenticator->checksum,
1521 			    (unsigned int *)valid_checksum);
1522 
1523 			if (status == 0 && *valid_checksum == 0)
1524 			    status = KRB5KRB_AP_ERR_BAD_INTEGRITY;
1525 error_cleanup:
1526 			if (chksumbuf)
1527 				krb5_xfree(chksumbuf);
1528 			if (status) {
1529 				krb5_free_authenticator(bsd_context,
1530 						authenticator);
1531 				return (status);
1532 			}
1533 		}
1534 		krb5_free_authenticator(bsd_context, authenticator);
1535 	}
1536 
1537 
1538 	if ((strncmp(cmdbuf, "-x ", 3) == 0)) {
1539 		if (krb5_privacy_allowed()) {
1540 			do_encrypt = 1;
1541 		} else {
1542 			syslog(LOG_ERR, "rshd: Encryption not supported");
1543 			error("rshd: Encryption not supported. \n");
1544 			exit(2);
1545 		}
1546 
1547 		status = krb5_auth_con_getremotesubkey(bsd_context,
1548 						    auth_context,
1549 						    &sessionkey);
1550 		if (status) {
1551 			syslog(LOG_ERR, "Error getting KRB5 session subkey");
1552 			error(gettext("Error getting KRB5 session subkey"));
1553 			exit(1);
1554 		}
1555 		/*
1556 		 * The "new" protocol requires that a subkey be sent.
1557 		 */
1558 		if (sessionkey == NULL && kcmd_protocol == KCMD_NEW_PROTOCOL) {
1559 			syslog(LOG_ERR, "No KRB5 session subkey sent");
1560 			error(gettext("No KRB5 session subkey sent"));
1561 			exit(1);
1562 		}
1563 		/*
1564 		 * The "old" protocol does not permit an authenticator subkey.
1565 		 * The key is taken from the ticket instead (see below).
1566 		 */
1567 		if (sessionkey != NULL && kcmd_protocol == KCMD_OLD_PROTOCOL) {
1568 			syslog(LOG_ERR, "KRB5 session subkey not permitted "
1569 				"with old KCMD protocol");
1570 			error(gettext("KRB5 session subkey not permitted "
1571 				"with old KCMD protocol"));
1572 			exit(1);
1573 		}
1574 		/*
1575 		 * If no key at this point, use the session key from
1576 		 * the ticket.
1577 		 */
1578 		if (sessionkey == NULL) {
1579 			/*
1580 			 * Save the session key so we can configure the crypto
1581 			 * module later.
1582 			 */
1583 			status = krb5_copy_keyblock(bsd_context,
1584 						ticket->enc_part2->session,
1585 						&sessionkey);
1586 			if (status) {
1587 				syslog(LOG_ERR, "krb5_copy_keyblock failed");
1588 				error(gettext("krb5_copy_keyblock failed"));
1589 				exit(1);
1590 			}
1591 		}
1592 		/*
1593 		 * If session key still cannot be found, we must
1594 		 * exit because encryption is required here
1595 		 * when encr_flag (-x) is set.
1596 		 */
1597 		if (sessionkey == NULL) {
1598 			syslog(LOG_ERR, "Could not find an encryption key");
1599 			error(gettext("Could not find an encryption key"));
1600 			exit(1);
1601 		}
1602 
1603 		/*
1604 		 * Initialize parameters/buffers for desread & deswrite here.
1605 		 */
1606 		desinbuf.data = des_inbuf;
1607 		desoutbuf.data = des_outbuf;
1608 		desinbuf.length = sizeof (des_inbuf);
1609 		desoutbuf.length = sizeof (des_outbuf);
1610 
1611 		eblock.crypto_entry = sessionkey->enctype;
1612 		eblock.key = (krb5_keyblock *)sessionkey;
1613 
1614 		init_encrypt(do_encrypt, bsd_context, kcmd_protocol,
1615 				&desinbuf, &desoutbuf, SERVER, &eblock);
1616 	}
1617 
1618 	ticket->enc_part2->session = 0;
1619 
1620 	if ((status = krb5_read_message(bsd_context, (krb5_pointer) & netf,
1621 				&inbuf))) {
1622 		error(gettext("Error reading message: %s\n"),
1623 				error_message(status));
1624 		exit(1);
1625 	}
1626 
1627 	if (inbuf.length) {
1628 		/* Forwarding being done, read creds */
1629 		if ((status = rd_and_store_for_creds(bsd_context,
1630 				auth_context, &inbuf, ticket, locuser,
1631 				&ccache))) {
1632 			error("Can't get forwarded credentials: %s\n",
1633 				error_message(status));
1634 			exit(1);
1635 		}
1636 
1637 	}
1638 	krb5_free_ticket(bsd_context, ticket);
1639 	return (0);
1640 }
1641 
1642 static void
1643 usage(void)
1644 {
1645 	(void) fprintf(stderr, gettext("%s: rshd [-k5eciU] "
1646 			"[-P path] [-M realm] [-s tos] "
1647 #ifdef DEBUG
1648 			"[-D port] "
1649 #endif /* DEBUG */
1650 			"[-S keytab]"), gettext("usage"));
1651 
1652 	syslog(LOG_ERR, "%s: rshd [-k5eciU] [-P path] [-M realm] [-s tos] "
1653 #ifdef DEBUG
1654 			"[-D port] "
1655 #endif /* DEBUG */
1656 			"[-S keytab]", gettext("usage"));
1657 }
1658