xref: /titanic_41/usr/src/uts/sun4v/os/suspend.c (revision 5545576a905a9b276b3ad8f0b4d03f7b62428a3e)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/mutex.h>
27 #include <sys/cpuvar.h>
28 #include <sys/cyclic.h>
29 #include <sys/disp.h>
30 #include <sys/ddi.h>
31 #include <sys/wdt.h>
32 #include <sys/callb.h>
33 #include <sys/cmn_err.h>
34 #include <sys/hypervisor_api.h>
35 #include <sys/membar.h>
36 #include <sys/x_call.h>
37 #include <sys/promif.h>
38 #include <sys/systm.h>
39 #include <sys/mach_descrip.h>
40 #include <sys/cpu_module.h>
41 #include <sys/pg.h>
42 #include <sys/lgrp.h>
43 #include <sys/sysmacros.h>
44 #include <sys/sunddi.h>
45 #include <sys/cpupart.h>
46 #include <sys/hsvc.h>
47 #include <vm/hat_sfmmu.h>
48 
49 /*
50  * Sun4v OS Suspend
51  *
52  * Provides a means to suspend a sun4v guest domain by pausing CPUs and then
53  * calling into the HV to initiate a suspension. Suspension is sequenced
54  * externally by calling suspend_pre, suspend_start, and suspend_post.
55  * suspend_pre and suspend_post are meant to perform any special operations
56  * that should be done before or after a suspend/resume operation. e.g.,
57  * callbacks to cluster software to disable heartbeat monitoring before the
58  * system is suspended. suspend_start prepares kernel services to be suspended
59  * and then suspends the domain by calling hv_guest_suspend.
60  *
61  * Special Handling for %tick and %stick Registers
62  *
63  * After a suspend/resume operation, the %tick and %stick registers may have
64  * jumped forwards or backwards. The delta is assumed to be consistent across
65  * all CPUs, within the negligible level of %tick and %stick variation
66  * acceptable on a cold boot. In order to maintain increasing %tick and %stick
67  * counter values without exposing large positive or negative jumps to kernel
68  * or user code, a %tick and %stick offset is used. Kernel reads of these
69  * counters return the sum of the hardware register counter and offset
70  * variable. After a suspend/resume operation, user reads of %tick or %stick
71  * are emulated. Suspend code enables emulation by setting the
72  * %{tick,stick}.NPT fields which trigger a privileged instruction access
73  * trap whenever the registers are read from user mode. If emulation has been
74  * enabled, the trap handler emulates the instruction. Emulation is only
75  * enabled during a successful suspend/resume operation. When emulation is
76  * enabled, CPUs that are DR'd into the system will have their
77  * %{tick,stick}.NPT bits set to 1 as well.
78  */
79 
80 extern u_longlong_t gettick(void);	/* returns %stick */
81 extern uint64_t gettick_counter(void);	/* returns %tick */
82 extern uint64_t gettick_npt(void);
83 extern uint64_t getstick_npt(void);
84 extern int mach_descrip_update(void);
85 extern cpuset_t cpu_ready_set;
86 extern uint64_t native_tick_offset;
87 extern uint64_t native_stick_offset;
88 
89 /*
90  * Global Sun Cluster pre/post callbacks.
91  */
92 const char *(*cl_suspend_error_decode)(int);
93 int (*cl_suspend_pre_callback)(void);
94 int (*cl_suspend_post_callback)(void);
95 #define	SC_PRE_FAIL_STR_FMT	"Sun Cluster pre-suspend failure: %d"
96 #define	SC_POST_FAIL_STR_FMT	"Sun Cluster post-suspend failure: %d"
97 #define	SC_FAIL_STR_MAX		256
98 
99 /*
100  * The minimum major and minor version of the HSVC_GROUP_CORE API group
101  * required in order to use OS suspend.
102  */
103 #define	SUSPEND_CORE_MAJOR	1
104 #define	SUSPEND_CORE_MINOR	2
105 
106 /*
107  * By default, sun4v OS suspend is supported if the required HV version
108  * is present. suspend_disabled should be set on platforms that do not
109  * allow OS suspend regardless of whether or not the HV supports it.
110  * It can also be set in /etc/system.
111  */
112 static int suspend_disabled = 0;
113 
114 /*
115  * Controls whether or not user-land tick and stick register emulation
116  * will be enabled following a successful suspend operation.
117  */
118 static int enable_user_tick_stick_emulation = 1;
119 
120 /*
121  * Indicates whether or not tick and stick emulation is currently active.
122  * After a successful suspend operation, if emulation is enabled, this
123  * variable is set to B_TRUE. Global scope to allow emulation code to
124  * check if emulation is active.
125  */
126 boolean_t tick_stick_emulation_active = B_FALSE;
127 
128 /*
129  * When non-zero, after a successful suspend and resume, cpunodes, CPU HW
130  * sharing data structures, and processor groups will be updated using
131  * information from the updated MD.
132  */
133 static int suspend_update_cpu_mappings = 1;
134 
135 /*
136  * DBG and DBG_PROM() macro.
137  */
138 #ifdef	DEBUG
139 
140 static int suspend_debug_flag = 0;
141 
142 #define	DBG_PROM		\
143 if (suspend_debug_flag)		\
144 	prom_printf
145 
146 #define	DBG			\
147 if (suspend_debug_flag)		\
148 	suspend_debug
149 
150 static void
151 suspend_debug(const char *fmt, ...)
152 {
153 	char	buf[512];
154 	va_list	ap;
155 
156 	va_start(ap, fmt);
157 	(void) vsprintf(buf, fmt, ap);
158 	va_end(ap);
159 
160 	cmn_err(CE_NOTE, "%s", buf);
161 }
162 
163 #else /* DEBUG */
164 
165 #define	DBG_PROM
166 #define	DBG
167 
168 #endif /* DEBUG */
169 
170 /*
171  * Return true if the HV supports OS suspend and if suspend has not been
172  * disabled on this platform.
173  */
174 boolean_t
175 suspend_supported(void)
176 {
177 	uint64_t major, minor;
178 
179 	if (suspend_disabled)
180 		return (B_FALSE);
181 
182 	if (hsvc_version(HSVC_GROUP_CORE, &major, &minor) != 0)
183 		return (B_FALSE);
184 
185 	return ((major == SUSPEND_CORE_MAJOR && minor >= SUSPEND_CORE_MINOR) ||
186 	    (major > SUSPEND_CORE_MAJOR));
187 }
188 
189 /*
190  * Given a source tick and stick value, set the tick and stick offsets such
191  * that the (current physical register value + offset == source value).
192  */
193 static void
194 set_tick_offsets(uint64_t source_tick, uint64_t source_stick)
195 {
196 	uint64_t target_tick;
197 	uint64_t target_stick;
198 
199 	native_tick_offset = 0;
200 	native_stick_offset = 0;
201 
202 	target_tick = gettick_counter();	/* returns %tick */
203 	target_stick = gettick();		/* returns %stick */
204 
205 	native_tick_offset = source_tick - target_tick;
206 	native_stick_offset = source_stick - target_stick;
207 }
208 
209 /*
210  * Set the {tick,stick}.NPT field to 1 on this CPU.
211  */
212 static void
213 enable_tick_stick_npt(void)
214 {
215 	(void) hv_stick_set_npt(1);
216 	(void) hv_tick_set_npt(1);
217 }
218 
219 /*
220  * Synchronize a CPU's {tick,stick}.NPT fields with the current state
221  * of the system. This is used when a CPU is DR'd into the system.
222  */
223 void
224 suspend_sync_tick_stick_npt(void)
225 {
226 	if (tick_stick_emulation_active) {
227 		DBG("enabling {%%tick/%%stick}.NPT on CPU 0x%x", CPU->cpu_id);
228 		(void) hv_stick_set_npt(1);
229 		(void) hv_tick_set_npt(1);
230 	} else {
231 		ASSERT(gettick_npt() == 0);
232 		ASSERT(getstick_npt() == 0);
233 	}
234 }
235 
236 /*
237  * Obtain an updated MD from the hypervisor and update cpunodes, CPU HW
238  * sharing data structures, and processor groups.
239  */
240 static void
241 update_cpu_mappings(void)
242 {
243 	md_t		*mdp;
244 	processorid_t	id;
245 	cpu_t		*cp;
246 	cpu_pg_t	*pgps[NCPU];
247 
248 	if ((mdp = md_get_handle()) == NULL) {
249 		DBG("suspend: md_get_handle failed");
250 		return;
251 	}
252 
253 	DBG("suspend: updating CPU mappings");
254 
255 	mutex_enter(&cpu_lock);
256 
257 	setup_chip_mappings(mdp);
258 	setup_exec_unit_mappings(mdp);
259 	for (id = 0; id < NCPU; id++) {
260 		if ((cp = cpu_get(id)) == NULL)
261 			continue;
262 		cpu_map_exec_units(cp);
263 	}
264 
265 	/*
266 	 * Re-calculate processor groups.
267 	 *
268 	 * First tear down all PG information before adding any new PG
269 	 * information derived from the MD we just downloaded. We must
270 	 * call pg_cpu_inactive and pg_cpu_active with CPUs paused and
271 	 * we want to minimize the number of times pause_cpus is called.
272 	 * Inactivating all CPUs would leave PGs without any active CPUs,
273 	 * so while CPUs are paused, call pg_cpu_inactive and swap in the
274 	 * bootstrap PG structure saving the original PG structure to be
275 	 * fini'd afterwards. This prevents the dispatcher from encountering
276 	 * PGs in which all CPUs are inactive.
277 	 */
278 	pause_cpus(NULL);
279 	for (id = 0; id < NCPU; id++) {
280 		if ((cp = cpu_get(id)) == NULL)
281 			continue;
282 		pg_cpu_inactive(cp);
283 		pgps[id] = cp->cpu_pg;
284 		pg_cpu_bootstrap(cp);
285 	}
286 	start_cpus();
287 
288 	/*
289 	 * pg_cpu_fini* and pg_cpu_init* must be called while CPUs are
290 	 * not paused. Use two separate loops here so that we do not
291 	 * initialize PG data for CPUs until all the old PG data structures
292 	 * are torn down.
293 	 */
294 	for (id = 0; id < NCPU; id++) {
295 		if ((cp = cpu_get(id)) == NULL)
296 			continue;
297 		pg_cpu_fini(cp, pgps[id]);
298 	}
299 
300 	/*
301 	 * Initialize PG data for each CPU, but leave the bootstrapped
302 	 * PG structure in place to avoid running with any PGs containing
303 	 * nothing but inactive CPUs.
304 	 */
305 	for (id = 0; id < NCPU; id++) {
306 		if ((cp = cpu_get(id)) == NULL)
307 			continue;
308 		pgps[id] = pg_cpu_init(cp, B_TRUE);
309 	}
310 
311 	/*
312 	 * Now that PG data has been initialized for all CPUs in the
313 	 * system, replace the bootstrapped PG structure with the
314 	 * initialized PG structure and call pg_cpu_active for each CPU.
315 	 */
316 	pause_cpus(NULL);
317 	for (id = 0; id < NCPU; id++) {
318 		if ((cp = cpu_get(id)) == NULL)
319 			continue;
320 		cp->cpu_pg = pgps[id];
321 		pg_cpu_active(cp);
322 	}
323 	start_cpus();
324 
325 	mutex_exit(&cpu_lock);
326 
327 	(void) md_fini_handle(mdp);
328 }
329 
330 /*
331  * Wrapper for the Sun Cluster error decoding function.
332  */
333 static int
334 cluster_error_decode(int error, char *error_reason, size_t max_reason_len)
335 {
336 	const char	*decoded;
337 	size_t		decoded_len;
338 
339 	ASSERT(error_reason != NULL);
340 	ASSERT(max_reason_len > 0);
341 
342 	max_reason_len = MIN(max_reason_len, SC_FAIL_STR_MAX);
343 
344 	if (cl_suspend_error_decode == NULL)
345 		return (-1);
346 
347 	if ((decoded = (*cl_suspend_error_decode)(error)) == NULL)
348 		return (-1);
349 
350 	/* Get number of non-NULL bytes */
351 	if ((decoded_len = strnlen(decoded, max_reason_len - 1)) == 0)
352 		return (-1);
353 
354 	bcopy(decoded, error_reason, decoded_len);
355 
356 	/*
357 	 * The error string returned from cl_suspend_error_decode
358 	 * should be NULL-terminated, but set the terminator here
359 	 * because we only copied non-NULL bytes. If the decoded
360 	 * string was not NULL-terminated, this guarantees that
361 	 * error_reason will be.
362 	 */
363 	error_reason[decoded_len] = '\0';
364 
365 	return (0);
366 }
367 
368 /*
369  * Wrapper for the Sun Cluster pre-suspend callback.
370  */
371 static int
372 cluster_pre_wrapper(char *error_reason, size_t max_reason_len)
373 {
374 	int rv = 0;
375 
376 	if (cl_suspend_pre_callback != NULL) {
377 		rv = (*cl_suspend_pre_callback)();
378 		DBG("suspend: cl_suspend_pre_callback returned %d", rv);
379 		if (rv != 0 && error_reason != NULL && max_reason_len > 0) {
380 			if (cluster_error_decode(rv, error_reason,
381 			    max_reason_len)) {
382 				(void) snprintf(error_reason, max_reason_len,
383 				    SC_PRE_FAIL_STR_FMT, rv);
384 			}
385 		}
386 	}
387 
388 	return (rv);
389 }
390 
391 /*
392  * Wrapper for the Sun Cluster post-suspend callback.
393  */
394 static int
395 cluster_post_wrapper(char *error_reason, size_t max_reason_len)
396 {
397 	int rv = 0;
398 
399 	if (cl_suspend_post_callback != NULL) {
400 		rv = (*cl_suspend_post_callback)();
401 		DBG("suspend: cl_suspend_post_callback returned %d", rv);
402 		if (rv != 0 && error_reason != NULL && max_reason_len > 0) {
403 			if (cluster_error_decode(rv, error_reason,
404 			    max_reason_len)) {
405 				(void) snprintf(error_reason,
406 				    max_reason_len, SC_POST_FAIL_STR_FMT, rv);
407 			}
408 		}
409 	}
410 
411 	return (rv);
412 }
413 
414 /*
415  * Execute pre-suspend callbacks preparing the system for a suspend operation.
416  * Returns zero on success, non-zero on failure. Sets the recovered argument
417  * to indicate whether or not callbacks could be undone in the event of a
418  * failure--if callbacks were successfully undone, *recovered is set to B_TRUE,
419  * otherwise *recovered is set to B_FALSE. Must be called successfully before
420  * suspend_start can be called. Callers should first call suspend_support to
421  * determine if OS suspend is supported.
422  */
423 int
424 suspend_pre(char *error_reason, size_t max_reason_len, boolean_t *recovered)
425 {
426 	int rv;
427 
428 	ASSERT(recovered != NULL);
429 
430 	/*
431 	 * Return an error if suspend_pre is erreoneously called
432 	 * when OS suspend is not supported.
433 	 */
434 	ASSERT(suspend_supported());
435 	if (!suspend_supported()) {
436 		DBG("suspend: suspend_pre called without suspend support");
437 		*recovered = B_TRUE;
438 		return (ENOTSUP);
439 	}
440 	DBG("suspend: %s", __func__);
441 
442 	rv = cluster_pre_wrapper(error_reason, max_reason_len);
443 
444 	/*
445 	 * At present, only one pre-suspend operation exists.
446 	 * If it fails, no recovery needs to be done.
447 	 */
448 	if (rv != 0 && recovered != NULL)
449 		*recovered = B_TRUE;
450 
451 	return (rv);
452 }
453 
454 /*
455  * Execute post-suspend callbacks. Returns zero on success, non-zero on
456  * failure. Must be called after suspend_start is called, regardless of
457  * whether or not suspend_start is successful.
458  */
459 int
460 suspend_post(char *error_reason, size_t max_reason_len)
461 {
462 	ASSERT(suspend_supported());
463 	DBG("suspend: %s", __func__);
464 	return (cluster_post_wrapper(error_reason, max_reason_len));
465 }
466 
467 /*
468  * Suspends the OS by pausing CPUs and calling into the HV to initiate
469  * the suspend. When the HV routine hv_guest_suspend returns, the system
470  * will be resumed. Must be called after a successful call to suspend_pre.
471  * suspend_post must be called after suspend_start, whether or not
472  * suspend_start returns an error.
473  */
474 /*ARGSUSED*/
475 int
476 suspend_start(char *error_reason, size_t max_reason_len)
477 {
478 	uint64_t	source_tick;
479 	uint64_t	source_stick;
480 	uint64_t	rv;
481 	timestruc_t	source_tod;
482 	int		spl;
483 
484 	ASSERT(suspend_supported());
485 	DBG("suspend: %s", __func__);
486 
487 	sfmmu_ctxdoms_lock();
488 
489 	mutex_enter(&cpu_lock);
490 
491 	/* Suspend the watchdog */
492 	watchdog_suspend();
493 
494 	/* Record the TOD */
495 	mutex_enter(&tod_lock);
496 	source_tod = tod_get();
497 	mutex_exit(&tod_lock);
498 
499 	/* Pause all other CPUs */
500 	pause_cpus(NULL);
501 	DBG_PROM("suspend: CPUs paused\n");
502 
503 	/* Suspend cyclics and disable interrupts */
504 	cyclic_suspend();
505 	DBG_PROM("suspend: cyclics suspended\n");
506 	spl = spl8();
507 
508 	source_tick = gettick_counter();
509 	source_stick = gettick();
510 	DBG_PROM("suspend: source_tick: 0x%lx\n", source_tick);
511 	DBG_PROM("suspend: source_stick: 0x%lx\n", source_stick);
512 
513 	/*
514 	 * Call into the HV to initiate the suspend.
515 	 * hv_guest_suspend() returns after the guest has been
516 	 * resumed or if the suspend operation failed or was
517 	 * cancelled. After a successful suspend, the %tick and
518 	 * %stick registers may have changed by an amount that is
519 	 * not proportional to the amount of time that has passed.
520 	 * They may have jumped forwards or backwards. This jump
521 	 * must be uniform across all CPUs and we operate under
522 	 * the assumption that it is (maintaining two global offset
523 	 * variables--one for %tick and one for %stick.)
524 	 */
525 	DBG_PROM("suspend: suspending... \n");
526 	rv = hv_guest_suspend();
527 	if (rv != 0) {
528 		splx(spl);
529 		cyclic_resume();
530 		start_cpus();
531 		watchdog_resume();
532 		mutex_exit(&cpu_lock);
533 		sfmmu_ctxdoms_unlock();
534 		DBG("suspend: failed, rv: %ld\n", rv);
535 		return (rv);
536 	}
537 
538 	/* Update the global tick and stick offsets */
539 	set_tick_offsets(source_tick, source_stick);
540 
541 	/* Ensure new offsets are globally visible before resuming CPUs */
542 	membar_sync();
543 
544 	/* Enable interrupts */
545 	splx(spl);
546 
547 	/* Set the {%tick,%stick}.NPT bits on all CPUs */
548 	if (enable_user_tick_stick_emulation) {
549 		xc_all((xcfunc_t *)enable_tick_stick_npt, NULL, NULL);
550 		xt_sync(cpu_ready_set);
551 		ASSERT(gettick_npt() != 0);
552 		ASSERT(getstick_npt() != 0);
553 	}
554 
555 	/* If emulation is enabled, but not currently active, enable it */
556 	if (enable_user_tick_stick_emulation && !tick_stick_emulation_active) {
557 		tick_stick_emulation_active = B_TRUE;
558 	}
559 
560 	sfmmu_ctxdoms_remove();
561 
562 	/* Resume cyclics, unpause CPUs */
563 	cyclic_resume();
564 	start_cpus();
565 
566 	/* Set the TOD */
567 	mutex_enter(&tod_lock);
568 	tod_set(source_tod);
569 	mutex_exit(&tod_lock);
570 
571 	/* Re-enable the watchdog */
572 	watchdog_resume();
573 
574 	mutex_exit(&cpu_lock);
575 
576 	/* Download the latest MD */
577 	if ((rv = mach_descrip_update()) != 0)
578 		cmn_err(CE_PANIC, "suspend: mach_descrip_update failed: %ld",
579 		    rv);
580 
581 	sfmmu_ctxdoms_update();
582 	sfmmu_ctxdoms_unlock();
583 
584 	/* Get new MD, update CPU mappings/relationships */
585 	if (suspend_update_cpu_mappings)
586 		update_cpu_mappings();
587 
588 	DBG("suspend: target tick: 0x%lx", gettick_counter());
589 	DBG("suspend: target stick: 0x%llx", gettick());
590 	DBG("suspend: user %%tick/%%stick emulation is %d",
591 	    tick_stick_emulation_active);
592 	DBG("suspend: finished");
593 
594 	return (0);
595 }
596