xref: /titanic_41/usr/src/uts/sun4u/sys/todm5819p.h (revision 7c478bd95313f5f23a4c958a745db2134aa03244)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2002-2003 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#ifndef	_TODM5819P_H
#define	_TODM5819P_H

#pragma ident	"%Z%%M%	%I%	%E% SMI"

#ifdef	__cplusplus
extern "C" {
#endif

extern  char    *v_rtc_addr_reg;
extern  volatile uint8_t *v_rtc_data_reg;

#ifdef	DEBUG
#include <sys/promif.h>
#define	DPRINTF if (m5819p_debug_flags) prom_printf
#else
#define	DPRINTF
#endif /* DEBUG */

#define	M5819P_ADDR_REG		*(volatile uint8_t *)v_rtc_addr_reg
#define	M5819P_DATA_REG		*(volatile uint8_t *)v_rtc_data_reg

/*
 * Definitions for Real Time Clock driver (ALI M5819P chip).
 */
#define	RTC_SEC		0x0	/* Seconds */
#define	RTC_ASEC	0x1	/* Seconds Alarm */
#define	RTC_MIN		0x2	/* Minutes */
#define	RTC_AMIN	0x3	/* Minutes Alarm */
#define	RTC_HRS		0x4	/* Hours */
#define	RTC_AHRS	0x5	/* Hours Alarm */
#define	RTC_DOW		0x6	/* Day-of-Week */
#define	RTC_DOM		0x7	/* Day-of-Month */
#define	RTC_MON		0x8	/* Month */
#define	RTC_YEAR	0x9	/* Year */
#define	RTC_CENTURY	0x32	/* Century */


#define	RTC_A		0xa	/* Control Register A */
#define	RTC_B		0xb	/* Control Register B */
#define	RTC_C		0xc	/* Control Register C */
#define	RTC_D		0xd	/* Control Register D */

/*
 * Control register A definitions
 */
#define	RTC_RS		0x0f	/* Rate select for periodic interrupt */
#define	RTC_DIV		0x70	/* Divider control */
#define	RTC_UIP		0x80	/* Update in progress bit */

#define	RTC_DIV_OPERATE	0x50	/* dividor value for operate mode */

/*
 * Control register B definitions
 */
#define	RTC_DSE		0x01	/* Daylight Savings Enable */
#define	RTC_HM		0x02	/* Hour mode, 1 = 24 hour, 0 = 12 hour */
#define	RTC_DM		0x04	/* Date mode, 1 = binary, 0 = BCD */
#define	RTC_UIE		0x10	/* Update-ended Interrupt Enable */
#define	RTC_AIE		0x20	/* Alarm Interrupt Enable */
#define	RTC_PIE		0x40	/* Periodic Interrupt Enable */
#define	RTC_SET		0x80	/* Stop updates for time set */

/*
 * Control Register C definitions
 */
#define	RTC_UF		0x10	/* UF flag bit */
#define	RTC_AF		0x20	/* AF flag bit */
#define	RTC_PF		0x40	/* PF flag bit */
#define	RTC_IRQF	0x80	/* IRQ flag */

/*
 * Control Register D definitions
 */
#define	RTC_ADOM_REG	RTC_D
#define	RTC_ADOM	0x3f	/*  Day-of-Month Alarm */


/*
 * The following two definitions are used in conjunction to wait
 * for the UIP bit to clear.
 */
#define	TODM5819_UIP_RETRY_THRESH	6
#define	TODM5819_UIP_WAIT_USEC		56


struct	rtc_t {
	uint8_t	rtc_sec;	/* seconds */
	uint8_t	rtc_asec;	/* alarm seconds */
	uint8_t	rtc_min;	/* mins */
	uint8_t	rtc_amin;	/* alarm mins */
	uint8_t	rtc_hrs;	/* hours */
	uint8_t	rtc_ahrs;	/* alarm hours */
	uint8_t	rtc_dow;	/* day of the week */
	uint8_t	rtc_dom;	/* day of the month */
	uint8_t	rtc_mon;	/* month */
	uint8_t	rtc_year;	/* year */
	uint8_t	rtc_rega;	/* REG A */
	uint8_t	rtc_regb;	/* REG B */
	uint8_t	rtc_regc;	/* REG C */
	uint8_t	rtc_regd;	/* REG D */
	uint8_t	rtc_century;	/* century */
	uint8_t	rtc_adom;	/* alarm  day */
};

#ifdef	__cplusplus
}
#endif

#endif	/* _TODM5819P_H */