xref: /titanic_41/usr/src/uts/sun/io/dada/targets/dad.c (revision ec5d0d675ffdbb09cd217abcd317e456ccc67846)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 /*
30  * Direct Attached  disk driver for SPARC machines.
31  */
32 
33 /*
34  * Includes, Declarations and Local Data
35  */
36 #include <sys/dada/dada.h>
37 #include <sys/dkbad.h>
38 #include <sys/dklabel.h>
39 #include <sys/dkio.h>
40 #include <sys/cdio.h>
41 #include <sys/vtoc.h>
42 #include <sys/dada/targets/daddef.h>
43 #include <sys/dada/targets/dadpriv.h>
44 #include <sys/file.h>
45 #include <sys/stat.h>
46 #include <sys/kstat.h>
47 #include <sys/vtrace.h>
48 #include <sys/aio_req.h>
49 #include <sys/note.h>
50 #include <sys/cmlb.h>
51 
52 /*
53  * Global Error Levels for Error Reporting
54  */
55 int dcd_error_level	= DCD_ERR_RETRYABLE;
56 /*
57  * Local Static Data
58  */
59 
60 static int dcd_io_time		= DCD_IO_TIME;
61 static int dcd_retry_count	= DCD_RETRY_COUNT;
62 #ifndef lint
63 static int dcd_report_pfa = 1;
64 #endif
65 static int dcd_rot_delay = 4;
66 static int dcd_poll_busycnt = DCD_POLL_TIMEOUT;
67 
68 /*
69  * Local Function Prototypes
70  */
71 
72 static int dcdopen(dev_t *dev_p, int flag, int otyp, cred_t *cred_p);
73 static int dcdclose(dev_t dev, int flag, int otyp, cred_t *cred_p);
74 static int dcdstrategy(struct buf *bp);
75 static int dcddump(dev_t dev, caddr_t addr, daddr_t blkno, int nblk);
76 static int dcdioctl(dev_t, int, intptr_t, int, cred_t *, int *);
77 static int dcdread(dev_t dev, struct uio *uio, cred_t *cred_p);
78 static int dcdwrite(dev_t dev, struct uio *uio, cred_t *cred_p);
79 static int dcd_prop_op(dev_t, dev_info_t *, ddi_prop_op_t, int,
80     char *, caddr_t, int *);
81 static int dcdaread(dev_t dev, struct aio_req *aio, cred_t *cred_p);
82 static int dcdawrite(dev_t dev, struct aio_req *aio, cred_t *cred_p);
83 
84 
85 static void dcd_free_softstate(struct dcd_disk *un, dev_info_t *devi);
86 static int dcd_doattach(dev_info_t *devi, int (*f)());
87 static int dcd_validate_geometry(struct dcd_disk *un);
88 static ddi_devid_t dcd_get_devid(struct dcd_disk *un);
89 static ddi_devid_t  dcd_create_devid(struct dcd_disk *un);
90 static int dcd_make_devid_from_serial(struct dcd_disk *un);
91 static void dcd_validate_model_serial(char *str, int *retlen, int totallen);
92 static int dcd_read_deviceid(struct dcd_disk *un);
93 static int dcd_write_deviceid(struct dcd_disk *un);
94 static int dcd_poll(struct dcd_pkt *pkt);
95 static char *dcd_rname(int reason);
96 static void dcd_flush_cache(struct dcd_disk *un);
97 
98 static int dcd_compute_dk_capacity(struct dcd_device *devp,
99     diskaddr_t *capacity);
100 static int dcd_send_lb_rw_cmd(dev_info_t *devinfo, void *bufaddr,
101     diskaddr_t start_block, size_t reqlength, uchar_t cmd);
102 
103 static void dcdmin(struct buf *bp);
104 
105 static int dcdioctl_cmd(dev_t, struct udcd_cmd *,
106     enum uio_seg, enum uio_seg);
107 
108 static void dcdstart(struct dcd_disk *un);
109 static void dcddone_and_mutex_exit(struct dcd_disk *un, struct buf *bp);
110 static void make_dcd_cmd(struct dcd_disk *un, struct buf *bp, int (*f)());
111 static void dcdudcdmin(struct buf *bp);
112 
113 static int dcdrunout(caddr_t);
114 static int dcd_check_wp(dev_t dev);
115 static int dcd_unit_ready(dev_t dev);
116 static void dcd_handle_tran_busy(struct buf *bp, struct diskhd *dp,
117     struct dcd_disk *un);
118 static void dcdintr(struct dcd_pkt *pkt);
119 static int dcd_handle_incomplete(struct dcd_disk *un, struct buf *bp);
120 static void dcd_offline(struct dcd_disk *un, int bechatty);
121 static int dcd_ready_and_valid(dev_t dev, struct dcd_disk *un);
122 static void dcd_reset_disk(struct dcd_disk *un, struct dcd_pkt *pkt);
123 static void dcd_translate(struct dadkio_status32 *statp, struct udcd_cmd *cmdp);
124 static int dcdflushdone(struct buf *bp);
125 
126 /* Function prototypes for cmlb */
127 
128 static int dcd_lb_rdwr(dev_info_t *devi, uchar_t cmd, void *bufaddr,
129     diskaddr_t start_block, size_t reqlength, void *tg_cookie);
130 
131 static int dcd_lb_getphygeom(dev_info_t *devi, cmlb_geom_t *phygeomp);
132 static int dcd_lb_getinfo(dev_info_t *devi, int cmd, void *arg,
133     void *tg_cookie);
134 
135 
136 static cmlb_tg_ops_t dcd_lb_ops = {
137 	TG_DK_OPS_VERSION_1,
138 	dcd_lb_rdwr,
139 	dcd_lb_getinfo
140 };
141 
142 /*
143  * Error and Logging Functions
144  */
145 #ifndef lint
146 static void clean_print(dev_info_t *dev, char *label, uint_t level,
147     char *title, char *data, int len);
148 static void dcdrestart(void *arg);
149 #endif /* lint */
150 
151 static int dcd_check_error(struct dcd_disk *un, struct buf *bp);
152 
153 /*
154  * Error statistics create/update functions
155  */
156 static int dcd_create_errstats(struct dcd_disk *, int);
157 
158 
159 
160 /*PRINTFLIKE4*/
161 extern void dcd_log(dev_info_t *, char *, uint_t, const char *, ...)
162     __KPRINTFLIKE(4);
163 extern void makecommand(struct dcd_pkt *, int, uchar_t, uint32_t,
164     uchar_t, uint32_t, uchar_t, uchar_t);
165 
166 
167 /*
168  * Configuration Routines
169  */
170 static int dcdinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
171     void **result);
172 static int dcdprobe(dev_info_t *devi);
173 static int dcdattach(dev_info_t *devi, ddi_attach_cmd_t cmd);
174 static int dcddetach(dev_info_t *devi, ddi_detach_cmd_t cmd);
175 static int dcdreset(dev_info_t *dip, ddi_reset_cmd_t cmd);
176 static int dcd_dr_detach(dev_info_t *devi);
177 static int dcdpower(dev_info_t *devi, int component, int level);
178 
179 static void *dcd_state;
180 static int dcd_max_instance;
181 static char *dcd_label = "dad";
182 
183 static char *diskokay = "disk okay\n";
184 
185 #if DEBUG || lint
186 #define	DCDDEBUG
187 #endif
188 
189 int dcd_test_flag = 0;
190 /*
191  * Debugging macros
192  */
193 #ifdef	DCDDEBUG
194 static int dcddebug = 0;
195 #define	DEBUGGING	(dcddebug > 1)
196 #define	DAD_DEBUG	if (dcddebug == 1) dcd_log
197 #define	DAD_DEBUG2	if (dcddebug > 1) dcd_log
198 #else	/* DCDDEBUG */
199 #define	dcddebug		(0)
200 #define	DEBUGGING	(0)
201 #define	DAD_DEBUG	if (0) dcd_log
202 #define	DAD_DEBUG2	if (0) dcd_log
203 #endif
204 
205 /*
206  * we use pkt_private area for storing bp and retry_count
207  * XXX: Really is this usefull.
208  */
209 struct dcd_pkt_private {
210 	struct buf	*dcdpp_bp;
211 	short		 dcdpp_retry_count;
212 	short		 dcdpp_victim_retry_count;
213 };
214 
215 
216 _NOTE(SCHEME_PROTECTS_DATA("Unique per pkt", dcd_pkt_private buf))
217 
218 #define	PP_LEN	(sizeof (struct dcd_pkt_private))
219 
220 #define	PKT_SET_BP(pkt, bp)	\
221 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_bp = bp
222 #define	PKT_GET_BP(pkt) \
223 	(((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_bp)
224 
225 
226 #define	PKT_SET_RETRY_CNT(pkt, n) \
227 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_retry_count = n
228 
229 #define	PKT_GET_RETRY_CNT(pkt) \
230 	(((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_retry_count)
231 
232 #define	PKT_INCR_RETRY_CNT(pkt, n) \
233 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_retry_count += n
234 
235 #define	PKT_SET_VICTIM_RETRY_CNT(pkt, n) \
236 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_victim_retry_count \
237 			= n
238 
239 #define	PKT_GET_VICTIM_RETRY_CNT(pkt) \
240 	(((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_victim_retry_count)
241 #define	PKT_INCR_VICTIM_RETRY_CNT(pkt, n) \
242 	((struct dcd_pkt_private *)pkt->pkt_private)->dcdpp_victim_retry_count \
243 			+= n
244 
245 #define	DISK_NOT_READY_RETRY_COUNT	(dcd_retry_count / 2)
246 
247 
248 /*
249  * Urk!
250  */
251 #define	SET_BP_ERROR(bp, err)	\
252 	bioerror(bp, err);
253 
254 #define	IOSP			KSTAT_IO_PTR(un->un_stats)
255 #define	IO_PARTITION_STATS	un->un_pstats[DCDPART(bp->b_edev)]
256 #define	IOSP_PARTITION		KSTAT_IO_PTR(IO_PARTITION_STATS)
257 
258 #define	DCD_DO_KSTATS(un, kstat_function, bp) \
259 	ASSERT(mutex_owned(DCD_MUTEX)); \
260 	if (bp != un->un_sbufp) { \
261 		if (un->un_stats) { \
262 			kstat_function(IOSP); \
263 		} \
264 		if (IO_PARTITION_STATS) { \
265 			kstat_function(IOSP_PARTITION); \
266 		} \
267 	}
268 
269 #define	DCD_DO_ERRSTATS(un, x) \
270 	if (un->un_errstats) { \
271 		struct dcd_errstats *dtp; \
272 		dtp = (struct dcd_errstats *)un->un_errstats->ks_data; \
273 		dtp->x.value.ui32++; \
274 	}
275 
276 #define	GET_SOFT_STATE(dev)						\
277 	struct dcd_disk *un;					\
278 	int instance, part;					\
279 	minor_t minor = getminor(dev);				\
280 									\
281 	part = minor & DCDPART_MASK;					\
282 	instance = minor >> DCDUNIT_SHIFT;				\
283 	if ((un = ddi_get_soft_state(dcd_state, instance)) == NULL)	\
284 		return (ENXIO);
285 
286 #define	LOGICAL_BLOCK_ALIGN(blkno, blknoshift) \
287 		(((blkno) & ((1 << (blknoshift)) - 1)) == 0)
288 
289 /*
290  * After the following number of sectors, the cylinder number spills over
291  * 0xFFFF if sectors = 63 and heads = 16.
292  */
293 #define	NUM_SECTORS_32G	0x3EFFC10
294 
295 /*
296  * Configuration Data
297  */
298 
299 /*
300  * Device driver ops vector
301  */
302 
303 static struct cb_ops dcd_cb_ops = {
304 	dcdopen,		/* open */
305 	dcdclose,		/* close */
306 	dcdstrategy,		/* strategy */
307 	nodev,			/* print */
308 	dcddump,		/* dump */
309 	dcdread,		/* read */
310 	dcdwrite,		/* write */
311 	dcdioctl,		/* ioctl */
312 	nodev,			/* devmap */
313 	nodev,			/* mmap */
314 	nodev,			/* segmap */
315 	nochpoll,		/* poll */
316 	dcd_prop_op,		/* cb_prop_op */
317 	0,			/* streamtab  */
318 	D_64BIT | D_MP | D_NEW,	/* Driver compatibility flag */
319 	CB_REV,			/* cb_rev */
320 	dcdaread, 		/* async I/O read entry point */
321 	dcdawrite		/* async I/O write entry point */
322 };
323 
324 static struct dev_ops dcd_ops = {
325 	DEVO_REV,		/* devo_rev, */
326 	0,			/* refcnt  */
327 	dcdinfo,		/* info */
328 	nulldev,		/* identify */
329 	dcdprobe,		/* probe */
330 	dcdattach,		/* attach */
331 	dcddetach,		/* detach */
332 	dcdreset,		/* reset */
333 	&dcd_cb_ops,		/* driver operations */
334 	(struct bus_ops *)0,	/* bus operations */
335 	dcdpower		/* power */
336 };
337 
338 
339 /*
340  * This is the loadable module wrapper.
341  */
342 #include <sys/modctl.h>
343 
344 static struct modldrv modldrv = {
345 	&mod_driverops,		/* Type of module. This one is a driver */
346 	"DAD Disk Driver %I%",	/* Name of the module. */
347 	&dcd_ops,	/* driver ops */
348 };
349 
350 
351 
352 static struct modlinkage modlinkage = {
353 	MODREV_1, &modldrv, NULL
354 };
355 
356 /*
357  * the dcd_attach_mutex only protects dcd_max_instance in multi-threaded
358  * attach situations
359  */
360 static kmutex_t dcd_attach_mutex;
361 
362 int
363 _init(void)
364 {
365 	int e;
366 
367 	if ((e = ddi_soft_state_init(&dcd_state, sizeof (struct dcd_disk),
368 	    DCD_MAXUNIT)) != 0)
369 		return (e);
370 
371 	mutex_init(&dcd_attach_mutex, NULL, MUTEX_DRIVER, NULL);
372 	e = mod_install(&modlinkage);
373 	if (e != 0) {
374 		mutex_destroy(&dcd_attach_mutex);
375 		ddi_soft_state_fini(&dcd_state);
376 		return (e);
377 	}
378 
379 	return (e);
380 }
381 
382 int
383 _fini(void)
384 {
385 	int e;
386 
387 	if ((e = mod_remove(&modlinkage)) != 0)
388 		return (e);
389 
390 	ddi_soft_state_fini(&dcd_state);
391 	mutex_destroy(&dcd_attach_mutex);
392 
393 	return (e);
394 }
395 
396 int
397 _info(struct modinfo *modinfop)
398 {
399 
400 	return (mod_info(&modlinkage, modinfop));
401 }
402 
403 static int
404 dcdprobe(dev_info_t *devi)
405 {
406 	struct dcd_device *devp;
407 	int rval = DDI_PROBE_PARTIAL;
408 	int instance;
409 
410 	devp = ddi_get_driver_private(devi);
411 	instance = ddi_get_instance(devi);
412 
413 	/*
414 	 * Keep a count of how many disks (ie. highest instance no) we have
415 	 * XXX currently not used but maybe useful later again
416 	 */
417 	mutex_enter(&dcd_attach_mutex);
418 	if (instance > dcd_max_instance)
419 		dcd_max_instance = instance;
420 	mutex_exit(&dcd_attach_mutex);
421 
422 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
423 		    "dcdprobe:\n");
424 
425 	if (ddi_get_soft_state(dcd_state, instance) != NULL)
426 		return (DDI_PROBE_PARTIAL);
427 
428 	/*
429 	 * Turn around and call utility probe routine
430 	 * to see whether we actually have a disk at
431 	 */
432 
433 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
434 	    "dcdprobe: %x\n", dcd_probe(devp, NULL_FUNC));
435 
436 	switch (dcd_probe(devp, NULL_FUNC)) {
437 	default:
438 	case DCDPROBE_NORESP:
439 	case DCDPROBE_NONCCS:
440 	case DCDPROBE_NOMEM:
441 	case DCDPROBE_FAILURE:
442 	case DCDPROBE_BUSY:
443 		break;
444 
445 	case DCDPROBE_EXISTS:
446 		/*
447 		 * Check whether it is a ATA device and then
448 		 * return  SUCCESS.
449 		 */
450 		DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
451 		    "config %x\n", devp->dcd_ident->dcd_config);
452 		if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
453 			if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
454 				rval = DDI_PROBE_SUCCESS;
455 			} else
456 				rval = DDI_PROBE_FAILURE;
457 		} else {
458 			rval = DDI_PROBE_FAILURE;
459 		}
460 		break;
461 	}
462 	dcd_unprobe(devp);
463 
464 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG,
465 	    "dcdprobe returns %x\n", rval);
466 
467 	return (rval);
468 }
469 
470 
471 /*ARGSUSED*/
472 static int
473 dcdattach(dev_info_t *devi, ddi_attach_cmd_t cmd)
474 {
475 	int instance, rval;
476 	struct dcd_device *devp;
477 	struct dcd_disk *un;
478 	struct diskhd *dp;
479 	char	*pm_comp[] =
480 	    { "NAME=ide-disk", "0=standby", "1=idle", "2=active" };
481 
482 	/* CONSTCOND */
483 	ASSERT(NO_COMPETING_THREADS);
484 
485 
486 	devp = ddi_get_driver_private(devi);
487 	instance = ddi_get_instance(devi);
488 	DAD_DEBUG2(devp->dcd_dev, dcd_label, DCD_DEBUG, "Attach Started\n");
489 
490 	switch (cmd) {
491 	case DDI_ATTACH:
492 		break;
493 
494 	case DDI_RESUME:
495 		if (!(un = ddi_get_soft_state(dcd_state, instance)))
496 			return (DDI_FAILURE);
497 		mutex_enter(DCD_MUTEX);
498 		Restore_state(un);
499 		/*
500 		 * Restore the state which was saved to give the
501 		 * the right state in un_last_state
502 		 */
503 		un->un_last_state = un->un_save_state;
504 		un->un_throttle = 2;
505 		cv_broadcast(&un->un_suspend_cv);
506 		/*
507 		 * Raise the power level of the device to active.
508 		 */
509 		mutex_exit(DCD_MUTEX);
510 		(void) pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE);
511 		mutex_enter(DCD_MUTEX);
512 
513 		/*
514 		 * start unit - if this is a low-activity device
515 		 * commands in queue will have to wait until new
516 		 * commands come in, which may take awhile.
517 		 * Also, we specifically don't check un_ncmds
518 		 * because we know that there really are no
519 		 * commands in progress after the unit was suspended
520 		 * and we could have reached the throttle level, been
521 		 * suspended, and have no new commands coming in for
522 		 * awhile.  Highly unlikely, but so is the low-
523 		 * activity disk scenario.
524 		 */
525 		dp = &un->un_utab;
526 		if (dp->b_actf && (dp->b_forw == NULL)) {
527 			dcdstart(un);
528 		}
529 
530 		mutex_exit(DCD_MUTEX);
531 		return (DDI_SUCCESS);
532 
533 	default:
534 		return (DDI_FAILURE);
535 	}
536 
537 	if (dcd_doattach(devi, SLEEP_FUNC) == DDI_FAILURE) {
538 		return (DDI_FAILURE);
539 	}
540 
541 	if (!(un = (struct dcd_disk *)
542 	    ddi_get_soft_state(dcd_state, instance))) {
543 		return (DDI_FAILURE);
544 	}
545 	devp->dcd_private = (ataopaque_t)un;
546 
547 	/*
548 	 * Add a zero-length attribute to tell the world we support
549 	 * kernel ioctls (for layered drivers)
550 	 */
551 	(void) ddi_prop_create(DDI_DEV_T_NONE, devi, DDI_PROP_CANSLEEP,
552 	    DDI_KERNEL_IOCTL, NULL, 0);
553 
554 	/*
555 	 * Since the dad device does not have the 'reg' property,
556 	 * cpr will not call its DDI_SUSPEND/DDI_RESUME entries.
557 	 * The following code is to tell cpr that this device
558 	 * does need to be suspended and resumed.
559 	 */
560 	(void) ddi_prop_update_string(DDI_DEV_T_NONE, devi,
561 	    "pm-hardware-state", (caddr_t)"needs-suspend-resume");
562 
563 	/*
564 	 * Initialize power management bookkeeping;
565 	 * Create components - In IDE case there are 3 levels and one
566 	 * component. The levels being - active, idle, standby.
567 	 */
568 
569 	rval = ddi_prop_update_string_array(DDI_DEV_T_NONE,
570 	    devi, "pm-components", pm_comp, 4);
571 	if (rval == DDI_PROP_SUCCESS) {
572 		/*
573 		 * Ignore the return value of pm_raise_power
574 		 * Even if we check the return values and
575 		 * remove the property created above, PM
576 		 * framework will not honour the change after
577 		 * first call to pm_raise_power. Hence, the
578 		 * removal of that property does not help if
579 		 * pm_raise_power fails.
580 		 */
581 		(void) pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE);
582 	}
583 
584 	ddi_report_dev(devi);
585 
586 	cmlb_alloc_handle(&un->un_dklbhandle);
587 
588 	if (cmlb_attach(devi,
589 		&dcd_lb_ops,
590 		0,
591 		0,
592 		0,
593 		DDI_NT_BLOCK_CHAN,
594 		CMLB_FAKE_GEOM_LABEL_IOCTLS_VTOC8,
595 		un->un_dklbhandle,
596 		0) != 0) {
597 		cmlb_free_handle(&un->un_dklbhandle);
598 		dcd_free_softstate(un, devi);
599 		return (DDI_FAILURE);
600 	}
601 
602 	mutex_enter(DCD_MUTEX);
603 	(void) dcd_validate_geometry(un);
604 
605 	/* Get devid; create a devid ONLY IF could not get ID */
606 	if (dcd_get_devid(un) == NULL) {
607 		/* Create the fab'd devid */
608 		(void) dcd_create_devid(un);
609 	}
610 	mutex_exit(DCD_MUTEX);
611 
612 	return (DDI_SUCCESS);
613 }
614 
615 static void
616 dcd_free_softstate(struct dcd_disk *un, dev_info_t *devi)
617 {
618 	struct dcd_device		*devp;
619 	int instance = ddi_get_instance(devi);
620 
621 	devp = ddi_get_driver_private(devi);
622 
623 	if (un) {
624 		sema_destroy(&un->un_semoclose);
625 		cv_destroy(&un->un_sbuf_cv);
626 		cv_destroy(&un->un_state_cv);
627 		cv_destroy(&un->un_disk_busy_cv);
628 		cv_destroy(&un->un_suspend_cv);
629 
630 		/*
631 		 * Deallocate command packet resources.
632 		 */
633 		if (un->un_sbufp)
634 			freerbuf(un->un_sbufp);
635 		if (un->un_dp) {
636 			kmem_free((caddr_t)un->un_dp, sizeof (*un->un_dp));
637 		}
638 		/*
639 		 * Unregister the devid and free devid resources allocated
640 		 */
641 		ddi_devid_unregister(DCD_DEVINFO);
642 		if (un->un_devid) {
643 			ddi_devid_free(un->un_devid);
644 			un->un_devid = NULL;
645 		}
646 
647 		/*
648 		 * Delete kstats. Kstats for non CD devices are deleted
649 		 * in dcdclose.
650 		 */
651 		if (un->un_stats) {
652 			kstat_delete(un->un_stats);
653 		}
654 
655 	}
656 
657 	/*
658 	 * Cleanup scsi_device resources.
659 	 */
660 	ddi_soft_state_free(dcd_state, instance);
661 	devp->dcd_private = (ataopaque_t)0;
662 	/* unprobe scsi device */
663 	dcd_unprobe(devp);
664 
665 	/* Remove properties created during attach */
666 	ddi_prop_remove_all(devi);
667 }
668 
669 static int
670 dcddetach(dev_info_t *devi, ddi_detach_cmd_t cmd)
671 {
672 	int instance;
673 	struct dcd_disk *un;
674 	clock_t	wait_cmds_complete;
675 	instance = ddi_get_instance(devi);
676 
677 	if (!(un = ddi_get_soft_state(dcd_state, instance)))
678 		return (DDI_FAILURE);
679 
680 	switch (cmd) {
681 	case DDI_DETACH:
682 		return (dcd_dr_detach(devi));
683 
684 	case DDI_SUSPEND:
685 		mutex_enter(DCD_MUTEX);
686 		if (un->un_state == DCD_STATE_SUSPENDED) {
687 			mutex_exit(DCD_MUTEX);
688 			return (DDI_SUCCESS);
689 		}
690 		un->un_throttle = 0;
691 		/*
692 		 * Save the last state first
693 		 */
694 		un->un_save_state = un->un_last_state;
695 
696 		New_state(un, DCD_STATE_SUSPENDED);
697 
698 		/*
699 		 * wait till current operation completed. If we are
700 		 * in the resource wait state (with an intr outstanding)
701 		 * then we need to wait till the intr completes and
702 		 * starts the next cmd. We wait for
703 		 * DCD_WAIT_CMDS_COMPLETE seconds before failing the
704 		 * DDI_SUSPEND.
705 		 */
706 		wait_cmds_complete = ddi_get_lbolt();
707 		wait_cmds_complete +=
708 			DCD_WAIT_CMDS_COMPLETE * drv_usectohz(1000000);
709 
710 		while (un->un_ncmds) {
711 			if (cv_timedwait(&un->un_disk_busy_cv,
712 			    DCD_MUTEX, wait_cmds_complete) == -1) {
713 				/*
714 				 * commands Didn't finish in the
715 				 * specified time, fail the DDI_SUSPEND.
716 				 */
717 				DAD_DEBUG2(DCD_DEVINFO, dcd_label,
718 				    DCD_DEBUG, "dcddetach: SUSPEND "
719 				    "failed due to outstanding cmds\n");
720 				Restore_state(un);
721 				mutex_exit(DCD_MUTEX);
722 				return (DDI_FAILURE);
723 			}
724 		}
725 		mutex_exit(DCD_MUTEX);
726 		return (DDI_SUCCESS);
727 	}
728 	return (DDI_FAILURE);
729 }
730 
731 /*
732  * The reset entry point gets invoked at the system shutdown time or through
733  * CPR code at system suspend.
734  * Will be flushing the cache and expect this to be last I/O operation to the
735  * disk before system reset/power off.
736  */
737 /*ARGSUSED*/
738 static int
739 dcdreset(dev_info_t *dip, ddi_reset_cmd_t cmd)
740 {
741 	struct dcd_disk *un;
742 	int instance;
743 
744 	instance = ddi_get_instance(dip);
745 
746 	if (!(un = ddi_get_soft_state(dcd_state, instance)))
747 		return (DDI_FAILURE);
748 
749 	dcd_flush_cache(un);
750 
751 	return (DDI_SUCCESS);
752 }
753 
754 
755 static int
756 dcd_dr_detach(dev_info_t *devi)
757 {
758 	struct dcd_device	*devp;
759 	struct dcd_disk		*un;
760 
761 	/*
762 	 * Get scsi_device structure for this instance.
763 	 */
764 	if ((devp = ddi_get_driver_private(devi)) == NULL)
765 		return (DDI_FAILURE);
766 
767 	/*
768 	 * Get dcd_disk structure containing target 'private' information
769 	 */
770 	un = (struct dcd_disk *)devp->dcd_private;
771 
772 	/*
773 	 * Verify there are NO outstanding commands issued to this device.
774 	 * ie, un_ncmds == 0.
775 	 * It's possible to have outstanding commands through the physio
776 	 * code path, even though everything's closed.
777 	 */
778 #ifndef lint
779 	_NOTE(COMPETING_THREADS_NOW);
780 #endif
781 	mutex_enter(DCD_MUTEX);
782 	if (un->un_ncmds) {
783 		mutex_exit(DCD_MUTEX);
784 		_NOTE(NO_COMPETING_THREADS_NOW);
785 		return (DDI_FAILURE);
786 	}
787 
788 	mutex_exit(DCD_MUTEX);
789 
790 	cmlb_detach(un->un_dklbhandle, 0);
791 	cmlb_free_handle(&un->un_dklbhandle);
792 
793 
794 	/*
795 	 * Lower the power state of the device
796 	 * i.e. the minimum power consumption state - sleep.
797 	 */
798 	(void) pm_lower_power(DCD_DEVINFO, 0, DCD_DEVICE_STANDBY);
799 
800 	_NOTE(NO_COMPETING_THREADS_NOW);
801 
802 	/*
803 	 * at this point there are no competing threads anymore
804 	 * release active MT locks and all device resources.
805 	 */
806 	dcd_free_softstate(un, devi);
807 
808 	return (DDI_SUCCESS);
809 }
810 
811 static int
812 dcdpower(dev_info_t *devi, int component, int level)
813 {
814 	struct dcd_pkt *pkt;
815 	struct dcd_disk *un;
816 	int	instance;
817 	uchar_t	cmd;
818 
819 
820 	instance = ddi_get_instance(devi);
821 
822 	if (!(un = ddi_get_soft_state(dcd_state, instance)) ||
823 		(DCD_DEVICE_STANDBY > level) || (level > DCD_DEVICE_ACTIVE) ||
824 		component != 0) {
825 		return (DDI_FAILURE);
826 	}
827 
828 	mutex_enter(DCD_MUTEX);
829 	/*
830 	 * if there are active commands for the device or device will be
831 	 * active soon. At the same time there is request to lower power
832 	 * return failure.
833 	 */
834 	if ((un->un_ncmds) && (level != DCD_DEVICE_ACTIVE)) {
835 		mutex_exit(DCD_MUTEX);
836 		return (DDI_FAILURE);
837 	}
838 
839 	if ((un->un_state == DCD_STATE_OFFLINE) ||
840 	    (un->un_state == DCD_STATE_FATAL)) {
841 		mutex_exit(DCD_MUTEX);
842 		return (DDI_FAILURE);
843 	}
844 
845 	if (level == DCD_DEVICE_ACTIVE) {
846 		/*
847 		 * No need to fire any command, just set the state structure
848 		 * to indicate previous state and set the level to active
849 		 */
850 		un->un_power_level = DCD_DEVICE_ACTIVE;
851 		if (un->un_state == DCD_STATE_PM_SUSPENDED)
852 			Restore_state(un);
853 		mutex_exit(DCD_MUTEX);
854 	} else {
855 		pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
856 		    NULL, (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
857 		    PKT_CONSISTENT, NULL_FUNC, NULL);
858 
859 		if (pkt == (struct dcd_pkt *)NULL) {
860 			mutex_exit(DCD_MUTEX);
861 			return (DDI_FAILURE);
862 		}
863 
864 		switch (level) {
865 		case DCD_DEVICE_IDLE:
866 			cmd = ATA_IDLE_IMMEDIATE;
867 			break;
868 
869 		case DCD_DEVICE_STANDBY:
870 			cmd = ATA_STANDBY_IMMEDIATE;
871 			break;
872 		}
873 
874 		makecommand(pkt, 0, cmd, 0, 0, 0, NO_DATA_XFER, 0);
875 		mutex_exit(DCD_MUTEX);
876 		/*
877 		 * Issue the appropriate command
878 		 */
879 		if ((dcd_poll(pkt)) || (SCBP_C(pkt) != STATUS_GOOD)) {
880 			dcd_destroy_pkt(pkt);
881 			return (DDI_FAILURE);
882 		}
883 		dcd_destroy_pkt(pkt);
884 		mutex_enter(DCD_MUTEX);
885 		if (un->un_state != DCD_STATE_PM_SUSPENDED)
886 			New_state(un, DCD_STATE_PM_SUSPENDED);
887 		un->un_power_level = level;
888 		mutex_exit(DCD_MUTEX);
889 	}
890 
891 	return (DDI_SUCCESS);
892 }
893 
894 static int
895 dcd_doattach(dev_info_t *devi, int (*canwait)())
896 {
897 	struct dcd_device *devp;
898 	struct dcd_disk *un = (struct dcd_disk *)0;
899 	int instance;
900 	int km_flags = (canwait != NULL_FUNC)? KM_SLEEP : KM_NOSLEEP;
901 	int rval;
902 	char *prop_template = "target%x-dcd-options";
903 	int options;
904 	char    prop_str[32];
905 	int target;
906 	diskaddr_t capacity;
907 
908 	devp = ddi_get_driver_private(devi);
909 
910 	/*
911 	 * Call the routine scsi_probe to do some of the dirty work.
912 	 * If the INQUIRY command succeeds, the field dcd_inq in the
913 	 * device structure will be filled in. The dcd_sense structure
914 	 * will also be allocated.
915 	 */
916 
917 	switch (dcd_probe(devp, canwait)) {
918 	default:
919 		return (DDI_FAILURE);
920 
921 	case DCDPROBE_EXISTS:
922 		if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
923 			if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
924 				rval = DDI_SUCCESS;
925 			} else {
926 				rval = DDI_FAILURE;
927 				goto error;
928 			}
929 		} else {
930 			rval = DDI_FAILURE;
931 			goto error;
932 		}
933 	}
934 
935 
936 	instance = ddi_get_instance(devp->dcd_dev);
937 
938 	if (ddi_soft_state_zalloc(dcd_state, instance) != DDI_SUCCESS) {
939 		rval = DDI_FAILURE;
940 		goto error;
941 	}
942 
943 	un = ddi_get_soft_state(dcd_state, instance);
944 
945 	un->un_sbufp = getrbuf(km_flags);
946 	if (un->un_sbufp == (struct buf *)NULL) {
947 		rval = DDI_FAILURE;
948 		goto error;
949 	}
950 
951 
952 	un->un_dcd = devp;
953 	un->un_power_level = -1;
954 	un->un_tgattribute.media_is_writable = 1;
955 
956 	sema_init(&un->un_semoclose, 1, NULL, SEMA_DRIVER, NULL);
957 	cv_init(&un->un_sbuf_cv, NULL, CV_DRIVER, NULL);
958 	cv_init(&un->un_state_cv, NULL, CV_DRIVER, NULL);
959 	/* Initialize power management conditional variable */
960 	cv_init(&un->un_disk_busy_cv, NULL, CV_DRIVER, NULL);
961 	cv_init(&un->un_suspend_cv, NULL, CV_DRIVER, NULL);
962 
963 	if (un->un_dp == 0) {
964 		/*
965 		 * Assume CCS drive, assume parity, but call
966 		 * it a CDROM if it is a RODIRECT device.
967 		 */
968 		un->un_dp = (struct dcd_drivetype *)
969 		    kmem_zalloc(sizeof (struct dcd_drivetype), km_flags);
970 		if (!un->un_dp) {
971 			rval = DDI_FAILURE;
972 			goto error;
973 		}
974 		if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
975 			if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
976 				un->un_dp->ctype = CTYPE_DISK;
977 			}
978 		} else  {
979 			rval = DDI_FAILURE;
980 			goto error;
981 		}
982 		un->un_dp->name = "CCS";
983 		un->un_dp->options = 0;
984 	}
985 
986 	/*
987 	 * Allow I/O requests at un_secsize offset in multiple of un_secsize.
988 	 */
989 	un->un_secsize = DEV_BSIZE;
990 
991 	/*
992 	 * If the device is not a removable media device, make sure that
993 	 * that the device is ready, by issuing the another identify but
994 	 * not needed. Get the capacity from identify data and store here.
995 	 */
996 	if (dcd_compute_dk_capacity(devp, &capacity) == 0) {
997 		un->un_diskcapacity = capacity;
998 		un->un_lbasize = DEV_BSIZE;
999 	}
1000 
1001 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "Geometry Data\n");
1002 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "cyls %x, heads %x",
1003 	    devp->dcd_ident->dcd_fixcyls,
1004 	    devp->dcd_ident->dcd_heads);
1005 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "sectors %x,",
1006 	    devp->dcd_ident->dcd_sectors);
1007 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "capacity %llx\n",
1008 	    capacity);
1009 
1010 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1011 	    "dcdprobe: drive selected\n");
1012 
1013 	/*
1014 	 * Check for the property target<n>-dcd-options to find the option
1015 	 * set by the HBA driver for this target so that we can set the
1016 	 * Unit structure variable so that we can send commands accordingly.
1017 	 */
1018 	target = devp->dcd_address->a_target;
1019 	(void) sprintf(prop_str, prop_template, target);
1020 	options = ddi_prop_get_int(DDI_DEV_T_ANY, devi, DDI_PROP_NOTPROM,
1021 	    prop_str, -1);
1022 	if (options < 0) {
1023 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1024 		    "No per target properties");
1025 	} else {
1026 		if ((options & DCD_DMA_MODE) == DCD_DMA_MODE) {
1027 			un->un_dp->options |= DMA_SUPPORTTED;
1028 			un->un_dp->dma_mode = (options >> 3) & 0x03;
1029 			DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1030 			    "mode %x\n", un->un_dp->dma_mode);
1031 		} else {
1032 			un->un_dp->options &= ~DMA_SUPPORTTED;
1033 			un->un_dp->pio_mode = options & 0x7;
1034 			if (options & DCD_BLOCK_MODE)
1035 				un->un_dp->options |= BLOCK_MODE;
1036 			DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1037 			    "mode %x\n", un->un_dp->pio_mode);
1038 		}
1039 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1040 		    "options %x,", un->un_dp->options);
1041 	}
1042 
1043 	un->un_throttle = 2;
1044 	/*
1045 	 * set default max_xfer_size - This should depend on whether the
1046 	 * Block mode is supported by the device or not.
1047 	 */
1048 	un->un_max_xfer_size = MAX_ATA_XFER_SIZE;
1049 
1050 	/*
1051 	 * Set write cache enable softstate
1052 	 *
1053 	 * WCE is only supported in ATAPI-4 or higher; for
1054 	 * lower rev devices, must assume write cache is
1055 	 * enabled.
1056 	 */
1057 	mutex_enter(DCD_MUTEX);
1058 	un->un_write_cache_enabled = (devp->dcd_ident->dcd_majvers == 0xffff) ||
1059 	    ((devp->dcd_ident->dcd_majvers & IDENTIFY_80_ATAPI_4) == 0) ||
1060 	    (devp->dcd_ident->dcd_features85 & IDENTIFY_85_WCE) != 0;
1061 	mutex_exit(DCD_MUTEX);
1062 
1063 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1064 	    "dcd_doattach returns good\n");
1065 
1066 	return (rval);
1067 
1068 error:
1069 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcd_doattach failed\n");
1070 	dcd_free_softstate(un, devi);
1071 	return (rval);
1072 }
1073 
1074 #ifdef NOTNEEDED
1075 /*
1076  * This routine is used to set the block mode of operation by issuing the
1077  * Set Block mode ata command with the maximum block mode possible
1078  */
1079 dcd_set_multiple(struct dcd_disk *un)
1080 {
1081 	int status;
1082 	struct udcd_cmd ucmd;
1083 	struct dcd_cmd cdb;
1084 	dev_t	dev;
1085 
1086 
1087 	/* Zero all the required structure */
1088 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
1089 
1090 	(void) bzero((caddr_t)&cdb, sizeof (struct dcd_cmd));
1091 
1092 	cdb.cmd = ATA_SET_MULTIPLE;
1093 	/*
1094 	 * Here we should pass what needs to go into sector count REGISTER.
1095 	 * Eventhough this field indicates the number of bytes to read we
1096 	 * need to specify the block factor in terms of bytes so that it
1097 	 * will be programmed by the HBA driver into the sector count register.
1098 	 */
1099 	cdb.size = un->un_lbasize * un->un_dp->block_factor;
1100 
1101 	cdb.sector_num.lba_num = 0;
1102 	cdb.address_mode = ADD_LBA_MODE;
1103 	cdb.direction = NO_DATA_XFER;
1104 
1105 	ucmd.udcd_flags = 0;
1106 	ucmd.udcd_cmd = &cdb;
1107 	ucmd.udcd_bufaddr = NULL;
1108 	ucmd.udcd_buflen = 0;
1109 	ucmd.udcd_flags |= UDCD_SILENT;
1110 
1111 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
1112 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
1113 
1114 
1115 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
1116 
1117 	return (status);
1118 }
1119 /*
1120  * The following routine is used only for setting the transfer mode
1121  * and it is not designed for transferring any other features subcommand.
1122  */
1123 dcd_set_features(struct dcd_disk *un, uchar_t mode)
1124 {
1125 	int status;
1126 	struct udcd_cmd ucmd;
1127 	struct dcd_cmd cdb;
1128 	dev_t	dev;
1129 
1130 
1131 	/* Zero all the required structure */
1132 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
1133 
1134 	(void) bzero((caddr_t)&cdb, sizeof (struct dcd_cmd));
1135 
1136 	cdb.cmd = ATA_SET_FEATURES;
1137 	/*
1138 	 * Here we need to pass what needs to go into the sector count register
1139 	 * But in the case of SET FEATURES command the value taken in the
1140 	 * sector count register depends what type of subcommand is
1141 	 * passed in the features register. Since we have defined the size to
1142 	 * be the size in bytes in this context it does not indicate bytes
1143 	 * instead it indicates the mode to be programmed.
1144 	 */
1145 	cdb.size = un->un_lbasize * mode;
1146 
1147 	cdb.sector_num.lba_num = 0;
1148 	cdb.address_mode = ADD_LBA_MODE;
1149 	cdb.direction = NO_DATA_XFER;
1150 	cdb.features = ATA_FEATURE_SET_MODE;
1151 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1152 	    "size %x, features %x, cmd %x\n",
1153 	    cdb.size, cdb.features, cdb.cmd);
1154 
1155 	ucmd.udcd_flags = 0;
1156 	ucmd.udcd_cmd = &cdb;
1157 	ucmd.udcd_bufaddr = NULL;
1158 	ucmd.udcd_buflen = 0;
1159 	ucmd.udcd_flags |= UDCD_SILENT;
1160 
1161 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
1162 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
1163 
1164 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
1165 
1166 	return (status);
1167 }
1168 #endif
1169 
1170 /*
1171  * Validate the geometry for this disk, e.g.,
1172  * see whether it has a valid label.
1173  */
1174 static int
1175 dcd_validate_geometry(struct dcd_disk *un)
1176 {
1177 	int secsize = 0;
1178 	struct  dcd_device *devp;
1179 	int secdiv;
1180 	int rval;
1181 
1182 	ASSERT(mutex_owned(DCD_MUTEX));
1183 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1184 	    "dcd_validate_geometry: started \n");
1185 
1186 	if (un->un_lbasize < 0) {
1187 		return (DCD_BAD_LABEL);
1188 	}
1189 
1190 	if (un->un_state == DCD_STATE_PM_SUSPENDED) {
1191 		mutex_exit(DCD_MUTEX);
1192 		if (pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE)
1193 			!= DDI_SUCCESS) {
1194 			mutex_enter(DCD_MUTEX);
1195 			return (DCD_BAD_LABEL);
1196 		}
1197 		mutex_enter(DCD_MUTEX);
1198 	}
1199 
1200 	secsize = un->un_secsize;
1201 
1202 	/*
1203 	 * take a log base 2 of sector size (sorry)
1204 	 */
1205 	for (secdiv = 0; secsize = secsize >> 1; secdiv++)
1206 		;
1207 	un->un_secdiv = secdiv;
1208 
1209 	/*
1210 	 * Only DIRECT ACCESS devices will have Sun labels.
1211 	 * CD's supposedly have a Sun label, too
1212 	 */
1213 
1214 	devp = un->un_dcd;
1215 
1216 	if (((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) &&
1217 	    (devp->dcd_ident->dcd_config & ATANON_REMOVABLE)) {
1218 		mutex_exit(DCD_MUTEX);
1219 		rval = cmlb_validate(un->un_dklbhandle, 0, 0);
1220 		mutex_enter(DCD_MUTEX);
1221 		if (rval == ENOMEM)
1222 			return (DCD_NO_MEM_FOR_LABEL);
1223 		else if (rval != 0)
1224 			return (DCD_BAD_LABEL);
1225 	} else {
1226 		/* it should never get here. */
1227 		return (DCD_BAD_LABEL);
1228 	}
1229 
1230 	/*
1231 	 * take a log base 2 of logical block size
1232 	 */
1233 	secsize = un->un_lbasize;
1234 	for (secdiv = 0; secsize = secsize >> 1; secdiv++)
1235 		;
1236 	un->un_lbadiv = secdiv;
1237 
1238 	/*
1239 	 * take a log base 2 of the multiple of DEV_BSIZE blocks that
1240 	 * make up one logical block
1241 	 */
1242 	secsize = un->un_lbasize >> DEV_BSHIFT;
1243 	for (secdiv = 0; secsize = secsize >> 1; secdiv++)
1244 		;
1245 	un->un_blknoshift = secdiv;
1246 	return (0);
1247 }
1248 
1249 /*
1250  * Unix Entry Points
1251  */
1252 
1253 /* ARGSUSED3 */
1254 static int
1255 dcdopen(dev_t *dev_p, int flag, int otyp, cred_t *cred_p)
1256 {
1257 	dev_t dev = *dev_p;
1258 	int rval = EIO;
1259 	int partmask;
1260 	int nodelay = (flag & (FNDELAY | FNONBLOCK));
1261 	int i;
1262 	char kstatname[KSTAT_STRLEN];
1263 	diskaddr_t lblocks;
1264 	char *partname;
1265 
1266 	GET_SOFT_STATE(dev);
1267 
1268 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1269 	    "Inside Open flag %x, otyp %x\n", flag, otyp);
1270 
1271 	if (otyp >= OTYPCNT) {
1272 		return (EINVAL);
1273 	}
1274 
1275 	partmask = 1 << part;
1276 
1277 	/*
1278 	 * We use a semaphore here in order to serialize
1279 	 * open and close requests on the device.
1280 	 */
1281 	sema_p(&un->un_semoclose);
1282 
1283 	mutex_enter(DCD_MUTEX);
1284 
1285 	if ((un->un_state & DCD_STATE_FATAL) == DCD_STATE_FATAL) {
1286 		rval = ENXIO;
1287 		goto done;
1288 	}
1289 
1290 	while (un->un_state == DCD_STATE_SUSPENDED) {
1291 		cv_wait(&un->un_suspend_cv, DCD_MUTEX);
1292 	}
1293 
1294 	if ((un->un_state == DCD_STATE_PM_SUSPENDED) && (!nodelay)) {
1295 		mutex_exit(DCD_MUTEX);
1296 		if (pm_raise_power(DCD_DEVINFO, 0, DCD_DEVICE_ACTIVE)
1297 		    != DDI_SUCCESS) {
1298 			mutex_enter(DCD_MUTEX);
1299 			rval = EIO;
1300 			goto done;
1301 		}
1302 		mutex_enter(DCD_MUTEX);
1303 	}
1304 
1305 	/*
1306 	 * set make_dcd_cmd() flags and stat_size here since these
1307 	 * are unlikely to change
1308 	 */
1309 	un->un_cmd_flags = 0;
1310 
1311 	un->un_cmd_stat_size = 2;
1312 
1313 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdopen un=0x%p\n",
1314 	    (void *)un);
1315 	/*
1316 	 * check for previous exclusive open
1317 	 */
1318 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1319 	    "exclopen=%x, flag=%x, regopen=%x\n",
1320 	    un->un_exclopen, flag, un->un_ocmap.regopen[otyp]);
1321 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1322 	    "Exclusive open flag %x, partmask %x\n",
1323 	    un->un_exclopen, partmask);
1324 
1325 	if (un->un_exclopen & (partmask)) {
1326 failed_exclusive:
1327 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1328 		    "exclusive open fails\n");
1329 		rval = EBUSY;
1330 		goto done;
1331 	}
1332 
1333 	if (flag & FEXCL) {
1334 		int i;
1335 		if (un->un_ocmap.lyropen[part]) {
1336 			goto failed_exclusive;
1337 		}
1338 		for (i = 0; i < (OTYPCNT - 1); i++) {
1339 			if (un->un_ocmap.regopen[i] & (partmask)) {
1340 				goto failed_exclusive;
1341 			}
1342 		}
1343 	}
1344 	if (flag & FWRITE) {
1345 		mutex_exit(DCD_MUTEX);
1346 		if (dcd_check_wp(dev)) {
1347 			sema_v(&un->un_semoclose);
1348 			return (EROFS);
1349 		}
1350 		mutex_enter(DCD_MUTEX);
1351 	}
1352 
1353 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1354 	    "Check Write Protect handled\n");
1355 
1356 	if (!nodelay) {
1357 		mutex_exit(DCD_MUTEX);
1358 		if ((rval = dcd_ready_and_valid(dev, un)) != 0) {
1359 			rval = EIO;
1360 		}
1361 		(void) pm_idle_component(DCD_DEVINFO, 0);
1362 		/*
1363 		 * Fail if device is not ready or if the number of disk
1364 		 * blocks is zero or negative for non CD devices.
1365 		 */
1366 		if (rval || cmlb_partinfo(un->un_dklbhandle,
1367 		    part, &lblocks, NULL, &partname, NULL, 0) ||
1368 		    lblocks <= 0) {
1369 			rval = EIO;
1370 			mutex_enter(DCD_MUTEX);
1371 			goto done;
1372 		}
1373 		mutex_enter(DCD_MUTEX);
1374 	}
1375 
1376 	if (otyp == OTYP_LYR) {
1377 		un->un_ocmap.lyropen[part]++;
1378 	} else {
1379 		un->un_ocmap.regopen[otyp] |= partmask;
1380 	}
1381 
1382 	/*
1383 	 * set up open and exclusive open flags
1384 	 */
1385 	if (flag & FEXCL) {
1386 		un->un_exclopen |= (partmask);
1387 	}
1388 
1389 
1390 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1391 	    "open of part %d type %d\n",
1392 	    part, otyp);
1393 
1394 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1395 	    "Kstats getting updated\n");
1396 	/*
1397 	 * only create kstats for disks, CD kstats created in dcdattach
1398 	 */
1399 	_NOTE(NO_COMPETING_THREADS_NOW);
1400 	mutex_exit(DCD_MUTEX);
1401 	if (un->un_stats == (kstat_t *)0) {
1402 		un->un_stats = kstat_create("dad", instance,
1403 		    NULL, "disk", KSTAT_TYPE_IO, 1,
1404 		    KSTAT_FLAG_PERSISTENT);
1405 		if (un->un_stats) {
1406 			un->un_stats->ks_lock = DCD_MUTEX;
1407 			kstat_install(un->un_stats);
1408 		}
1409 
1410 		/*
1411 		 * set up partition statistics for each partition
1412 		 * with number of blocks > 0
1413 		 */
1414 		if (!nodelay) {
1415 			for (i = 0; i < NDKMAP; i++) {
1416 				if ((un->un_pstats[i] == (kstat_t *)0) &&
1417 				    (cmlb_partinfo(un->un_dklbhandle,
1418 				    i, &lblocks, NULL, &partname,
1419 				    NULL, 0) == 0) && lblocks > 0) {
1420 					(void) sprintf(kstatname, "dad%d,%s",
1421 					    instance, partname);
1422 					un->un_pstats[i] = kstat_create("dad",
1423 					    instance,
1424 					    kstatname,
1425 					    "partition",
1426 					    KSTAT_TYPE_IO,
1427 					    1,
1428 					    KSTAT_FLAG_PERSISTENT);
1429 					if (un->un_pstats[i]) {
1430 						un->un_pstats[i]->ks_lock =
1431 						    DCD_MUTEX;
1432 						kstat_install(un->un_pstats[i]);
1433 					}
1434 				}
1435 			}
1436 		}
1437 		/*
1438 		 * set up error kstats
1439 		 */
1440 		(void) dcd_create_errstats(un, instance);
1441 	}
1442 #ifndef lint
1443 	_NOTE(COMPETING_THREADS_NOW);
1444 #endif
1445 
1446 	sema_v(&un->un_semoclose);
1447 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "Open success\n");
1448 	return (0);
1449 
1450 done:
1451 	mutex_exit(DCD_MUTEX);
1452 	sema_v(&un->un_semoclose);
1453 	return (rval);
1454 
1455 }
1456 
1457 /*
1458  * Test if disk is ready and has a valid geometry.
1459  */
1460 static int
1461 dcd_ready_and_valid(dev_t dev, struct dcd_disk *un)
1462 {
1463 	int rval = 1;
1464 	int g_error = 0;
1465 
1466 	mutex_enter(DCD_MUTEX);
1467 	/*
1468 	 * cmds outstanding
1469 	 */
1470 	if (un->un_ncmds == 0) {
1471 		(void) dcd_unit_ready(dev);
1472 	}
1473 
1474 	/*
1475 	 * If device is not yet ready here, inform it is offline
1476 	 */
1477 	if (un->un_state == DCD_STATE_NORMAL) {
1478 		rval = dcd_unit_ready(dev);
1479 		if (rval != 0 && rval != EACCES) {
1480 			dcd_offline(un, 1);
1481 			goto done;
1482 		}
1483 	}
1484 
1485 	if (un->un_format_in_progress == 0) {
1486 		g_error = dcd_validate_geometry(un);
1487 	}
1488 
1489 	/*
1490 	 * check if geometry was valid. We don't check the validity of
1491 	 * geometry for CDROMS.
1492 	 */
1493 
1494 	if (g_error == DCD_BAD_LABEL) {
1495 		rval = 1;
1496 		goto done;
1497 	}
1498 
1499 
1500 	/*
1501 	 * the state has changed; inform the media watch routines
1502 	 */
1503 	un->un_mediastate = DKIO_INSERTED;
1504 	cv_broadcast(&un->un_state_cv);
1505 	rval = 0;
1506 
1507 done:
1508 	mutex_exit(DCD_MUTEX);
1509 	return (rval);
1510 }
1511 
1512 
1513 /*ARGSUSED*/
1514 static int
1515 dcdclose(dev_t dev, int flag, int otyp, cred_t *cred_p)
1516 {
1517 	uchar_t *cp;
1518 	int i;
1519 
1520 	GET_SOFT_STATE(dev);
1521 
1522 
1523 	if (otyp >= OTYPCNT)
1524 		return (ENXIO);
1525 
1526 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1527 	    "close of part %d type %d\n",
1528 	    part, otyp);
1529 	sema_p(&un->un_semoclose);
1530 
1531 	mutex_enter(DCD_MUTEX);
1532 
1533 	if (un->un_exclopen & (1<<part)) {
1534 		un->un_exclopen &= ~(1<<part);
1535 	}
1536 
1537 	if (otyp == OTYP_LYR) {
1538 		un->un_ocmap.lyropen[part] -= 1;
1539 	} else {
1540 		un->un_ocmap.regopen[otyp] &= ~(1<<part);
1541 	}
1542 
1543 	cp = &un->un_ocmap.chkd[0];
1544 	while (cp < &un->un_ocmap.chkd[OCSIZE]) {
1545 		if (*cp != (uchar_t)0) {
1546 			break;
1547 		}
1548 		cp++;
1549 	}
1550 
1551 	if (cp == &un->un_ocmap.chkd[OCSIZE]) {
1552 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "last close\n");
1553 		if (un->un_state == DCD_STATE_OFFLINE) {
1554 			dcd_offline(un, 1);
1555 		}
1556 
1557 		mutex_exit(DCD_MUTEX);
1558 		(void) cmlb_close(un->un_dklbhandle, 0);
1559 
1560 		_NOTE(NO_COMPETING_THREADS_NOW);
1561 		if (un->un_stats) {
1562 			kstat_delete(un->un_stats);
1563 			un->un_stats = 0;
1564 		}
1565 		for (i = 0; i < NDKMAP; i++) {
1566 			if (un->un_pstats[i]) {
1567 				kstat_delete(un->un_pstats[i]);
1568 				un->un_pstats[i] = (kstat_t *)0;
1569 			}
1570 		}
1571 
1572 		if (un->un_errstats) {
1573 			kstat_delete(un->un_errstats);
1574 			un->un_errstats = (kstat_t *)0;
1575 		}
1576 		mutex_enter(DCD_MUTEX);
1577 
1578 #ifndef lint
1579 		_NOTE(COMPETING_THREADS_NOW);
1580 #endif
1581 	}
1582 
1583 	mutex_exit(DCD_MUTEX);
1584 	sema_v(&un->un_semoclose);
1585 	return (0);
1586 }
1587 
1588 static void
1589 dcd_offline(struct dcd_disk *un, int bechatty)
1590 {
1591 	if (bechatty)
1592 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN, "offline\n");
1593 
1594 	mutex_exit(DCD_MUTEX);
1595 	cmlb_invalidate(un->un_dklbhandle, 0);
1596 	mutex_enter(DCD_MUTEX);
1597 }
1598 
1599 /*
1600  * Given the device number return the devinfo pointer
1601  * from the scsi_device structure.
1602  */
1603 /*ARGSUSED*/
1604 static int
1605 dcdinfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
1606 {
1607 	dev_t dev;
1608 	struct dcd_disk *un;
1609 	int instance, error;
1610 
1611 
1612 	switch (infocmd) {
1613 	case DDI_INFO_DEVT2DEVINFO:
1614 		dev = (dev_t)arg;
1615 		instance = DCDUNIT(dev);
1616 		if ((un = ddi_get_soft_state(dcd_state, instance)) == NULL)
1617 			return (DDI_FAILURE);
1618 		*result = (void *) DCD_DEVINFO;
1619 		error = DDI_SUCCESS;
1620 		break;
1621 	case DDI_INFO_DEVT2INSTANCE:
1622 		dev = (dev_t)arg;
1623 		instance = DCDUNIT(dev);
1624 		*result = (void *)(uintptr_t)instance;
1625 		error = DDI_SUCCESS;
1626 		break;
1627 	default:
1628 		error = DDI_FAILURE;
1629 	}
1630 	return (error);
1631 }
1632 
1633 /*
1634  * property operation routine.	return the number of blocks for the partition
1635  * in question or forward the request to the propery facilities.
1636  */
1637 static int
1638 dcd_prop_op(dev_t dev, dev_info_t *dip, ddi_prop_op_t prop_op, int mod_flags,
1639     char *name, caddr_t valuep, int *lengthp)
1640 {
1641 	int		instance = ddi_get_instance(dip);
1642 	struct dcd_disk	*un;
1643 	uint64_t	nblocks64;
1644 	diskaddr_t lblocks;
1645 
1646 	/*
1647 	 * Our dynamic properties are all device specific and size oriented.
1648 	 * Requests issued under conditions where size is valid are passed
1649 	 * to ddi_prop_op_nblocks with the size information, otherwise the
1650 	 * request is passed to ddi_prop_op. Size depends on valid geometry.
1651 	 */
1652 	un = ddi_get_soft_state(dcd_state, instance);
1653 	if ((dev == DDI_DEV_T_ANY) || (un == NULL)) {
1654 		return (ddi_prop_op(dev, dip, prop_op, mod_flags,
1655 		    name, valuep, lengthp));
1656 	} else {
1657 		if (cmlb_partinfo(
1658 		    un->un_dklbhandle,
1659 		    DCDPART(dev),
1660 		    &lblocks,
1661 		    NULL,
1662 		    NULL,
1663 		    NULL,
1664 		    0)) {
1665 			return (ddi_prop_op(dev, dip, prop_op, mod_flags,
1666 			    name, valuep, lengthp));
1667 		}
1668 
1669 		/* get nblocks value */
1670 		nblocks64 = (ulong_t)lblocks;
1671 
1672 		return (ddi_prop_op_nblocks(dev, dip, prop_op, mod_flags,
1673 		    name, valuep, lengthp, nblocks64));
1674 	}
1675 }
1676 
1677 /*
1678  * These routines perform raw i/o operations.
1679  */
1680 /*ARGSUSED*/
1681 void
1682 dcduscsimin(struct buf *bp)
1683 {
1684 
1685 }
1686 
1687 
1688 static void
1689 dcdmin(struct buf *bp)
1690 {
1691 	struct dcd_disk *un;
1692 	int instance;
1693 	minor_t minor = getminor(bp->b_edev);
1694 	instance = minor >> DCDUNIT_SHIFT;
1695 	un = ddi_get_soft_state(dcd_state, instance);
1696 
1697 	if (bp->b_bcount > un->un_max_xfer_size)
1698 		bp->b_bcount = un->un_max_xfer_size;
1699 }
1700 
1701 
1702 /* ARGSUSED2 */
1703 static int
1704 dcdread(dev_t dev, struct uio *uio, cred_t *cred_p)
1705 {
1706 	int secmask;
1707 	GET_SOFT_STATE(dev);
1708 #ifdef lint
1709 	part = part;
1710 #endif /* lint */
1711 	secmask = un->un_secsize - 1;
1712 
1713 	if (uio->uio_loffset & ((offset_t)(secmask))) {
1714 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1715 		    "file offset not modulo %d\n",
1716 		    un->un_secsize);
1717 		return (EINVAL);
1718 	} else if (uio->uio_iov->iov_len & (secmask)) {
1719 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1720 		    "transfer length not modulo %d\n", un->un_secsize);
1721 		return (EINVAL);
1722 	}
1723 	return (physio(dcdstrategy, (struct buf *)0, dev, B_READ, dcdmin, uio));
1724 }
1725 
1726 /* ARGSUSED2 */
1727 static int
1728 dcdaread(dev_t dev, struct aio_req *aio, cred_t *cred_p)
1729 {
1730 	int secmask;
1731 	struct uio *uio = aio->aio_uio;
1732 	GET_SOFT_STATE(dev);
1733 #ifdef lint
1734 	part = part;
1735 #endif /* lint */
1736 	secmask = un->un_secsize - 1;
1737 
1738 	if (uio->uio_loffset & ((offset_t)(secmask))) {
1739 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1740 		    "file offset not modulo %d\n",
1741 		    un->un_secsize);
1742 		return (EINVAL);
1743 	} else if (uio->uio_iov->iov_len & (secmask)) {
1744 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1745 		    "transfer length not modulo %d\n", un->un_secsize);
1746 		return (EINVAL);
1747 	}
1748 	return (aphysio(dcdstrategy, anocancel, dev, B_READ, dcdmin, aio));
1749 }
1750 
1751 /* ARGSUSED2 */
1752 static int
1753 dcdwrite(dev_t dev, struct uio *uio, cred_t *cred_p)
1754 {
1755 	int secmask;
1756 	GET_SOFT_STATE(dev);
1757 #ifdef lint
1758 	part = part;
1759 #endif /* lint */
1760 	secmask = un->un_secsize - 1;
1761 
1762 	if (uio->uio_loffset & ((offset_t)(secmask))) {
1763 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1764 		    "file offset not modulo %d\n",
1765 		    un->un_secsize);
1766 		return (EINVAL);
1767 	} else if (uio->uio_iov->iov_len & (secmask)) {
1768 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1769 		    "transfer length not modulo %d\n", un->un_secsize);
1770 		return (EINVAL);
1771 	}
1772 	return (physio(dcdstrategy, (struct buf *)0, dev, B_WRITE, dcdmin,
1773 	    uio));
1774 }
1775 
1776 /* ARGSUSED2 */
1777 static int
1778 dcdawrite(dev_t dev, struct aio_req *aio, cred_t *cred_p)
1779 {
1780 	int secmask;
1781 	struct uio *uio = aio->aio_uio;
1782 	GET_SOFT_STATE(dev);
1783 #ifdef lint
1784 	part = part;
1785 #endif /* lint */
1786 	secmask = un->un_secsize - 1;
1787 
1788 	if (uio->uio_loffset & ((offset_t)(secmask))) {
1789 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1790 		    "file offset not modulo %d\n",
1791 		    un->un_secsize);
1792 		return (EINVAL);
1793 	} else if (uio->uio_iov->iov_len & (secmask)) {
1794 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1795 		    "transfer length not modulo %d\n", un->un_secsize);
1796 		return (EINVAL);
1797 	}
1798 	return (aphysio(dcdstrategy, anocancel, dev, B_WRITE, dcdmin, aio));
1799 }
1800 
1801 /*
1802  * strategy routine
1803  */
1804 static int
1805 dcdstrategy(struct buf *bp)
1806 {
1807 	struct dcd_disk *un;
1808 	struct diskhd *dp;
1809 	int i;
1810 	minor_t minor = getminor(bp->b_edev);
1811 	diskaddr_t p_lblksrt;
1812 	diskaddr_t lblocks;
1813 	diskaddr_t bn;
1814 
1815 	if ((un = ddi_get_soft_state(dcd_state,
1816 	    minor >> DCDUNIT_SHIFT)) == NULL ||
1817 	    un->un_state == DCD_STATE_DUMPING ||
1818 	    ((un->un_state  & DCD_STATE_FATAL) == DCD_STATE_FATAL)) {
1819 		SET_BP_ERROR(bp, ((un) ? ENXIO : EIO));
1820 error:
1821 		bp->b_resid = bp->b_bcount;
1822 		biodone(bp);
1823 		return (0);
1824 	}
1825 
1826 	/*
1827 	 * If the request size (buf->b_bcount)is greater than the size
1828 	 * (un->un_max_xfer_size) supported by the target driver fail
1829 	 * the request with EINVAL error code.
1830 	 *
1831 	 * We are not supposed to receive requests exceeding
1832 	 * un->un_max_xfer_size size because the caller is expected to
1833 	 * check what is the maximum size that is supported by this
1834 	 * driver either through ioctl or dcdmin routine(which is private
1835 	 * to this driver).
1836 	 * But we have seen cases (like meta driver(md))where dcdstrategy
1837 	 * called with more than supported size and cause data corruption.
1838 	 */
1839 
1840 	if (bp->b_bcount > un->un_max_xfer_size) {
1841 		SET_BP_ERROR(bp, EINVAL);
1842 		goto error;
1843 	}
1844 
1845 	TRACE_2(TR_FAC_DADA, TR_DCDSTRATEGY_START,
1846 	    "dcdstrategy_start: bp 0x%p un 0x%p", bp, un);
1847 
1848 	/*
1849 	 * Commands may sneak in while we released the mutex in
1850 	 * DDI_SUSPEND, we should block new commands.
1851 	 */
1852 	mutex_enter(DCD_MUTEX);
1853 	while (un->un_state == DCD_STATE_SUSPENDED) {
1854 		cv_wait(&un->un_suspend_cv, DCD_MUTEX);
1855 	}
1856 
1857 	if (un->un_state == DCD_STATE_PM_SUSPENDED) {
1858 		mutex_exit(DCD_MUTEX);
1859 		(void) pm_idle_component(DCD_DEVINFO, 0);
1860 		if (pm_raise_power(DCD_DEVINFO, 0,
1861 			DCD_DEVICE_ACTIVE) !=  DDI_SUCCESS) {
1862 			SET_BP_ERROR(bp, EIO);
1863 			goto error;
1864 		}
1865 		mutex_enter(DCD_MUTEX);
1866 	}
1867 	mutex_exit(DCD_MUTEX);
1868 
1869 	/*
1870 	 * Map-in the buffer in case starting address is not word aligned.
1871 	 */
1872 
1873 	if (((uintptr_t)bp->b_un.b_addr) & 0x1)
1874 		bp_mapin(bp);
1875 
1876 	bp->b_flags &= ~(B_DONE|B_ERROR);
1877 	bp->b_resid = 0;
1878 	bp->av_forw = 0;
1879 
1880 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1881 	    "bp->b_bcount %lx\n", bp->b_bcount);
1882 
1883 	if (bp != un->un_sbufp) {
1884 validated:	if (cmlb_partinfo(un->un_dklbhandle,
1885 		    minor & DCDPART_MASK,
1886 		    &lblocks,
1887 		    &p_lblksrt,
1888 		    NULL,
1889 		    NULL,
1890 		    0) == 0) {
1891 
1892 			bn = dkblock(bp);
1893 
1894 			DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
1895 			    "dkblock(bp) is %llu\n", bn);
1896 
1897 			i = 0;
1898 			if (bn < 0) {
1899 				i = -1;
1900 			} else if (bn >= lblocks) {
1901 				/*
1902 				 * For proper comparison, file system block
1903 				 * number has to be scaled to actual CD
1904 				 * transfer size.
1905 				 * Since all the CDROM operations
1906 				 * that have Sun Labels are in the correct
1907 				 * block size this will work for CD's.	This
1908 				 * will have to change when we have different
1909 				 * sector sizes.
1910 				 *
1911 				 * if bn == lblocks,
1912 				 * Not an error, resid == count
1913 				 */
1914 				if (bn > lblocks) {
1915 					i = -1;
1916 				} else {
1917 					i = 1;
1918 				}
1919 			} else if (bp->b_bcount & (un->un_secsize-1)) {
1920 				/*
1921 				 * This should really be:
1922 				 *
1923 				 * ... if (bp->b_bcount & (un->un_lbasize-1))
1924 				 *
1925 				 */
1926 				i = -1;
1927 			} else {
1928 				if (!bp->b_bcount) {
1929 					printf("Waring : Zero read or Write\n");
1930 					goto error;
1931 				}
1932 				/*
1933 				 * sort by absolute block number.
1934 				 */
1935 				bp->b_resid = bn;
1936 				bp->b_resid += p_lblksrt;
1937 				/*
1938 				 * zero out av_back - this will be a signal
1939 				 * to dcdstart to go and fetch the resources
1940 				 */
1941 				bp->av_back = NO_PKT_ALLOCATED;
1942 			}
1943 
1944 			/*
1945 			 * Check to see whether or not we are done
1946 			 * (with or without errors).
1947 			 */
1948 
1949 			if (i != 0) {
1950 				if (i < 0) {
1951 					bp->b_flags |= B_ERROR;
1952 				}
1953 				goto error;
1954 			}
1955 		} else {
1956 			/*
1957 			 * opened in NDELAY/NONBLOCK mode?
1958 			 * Check if disk is ready and has a valid geometry
1959 			 */
1960 			if (dcd_ready_and_valid(bp->b_edev, un) == 0) {
1961 				goto validated;
1962 			} else {
1963 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
1964 				    "i/o to invalid geometry\n");
1965 				SET_BP_ERROR(bp, EIO);
1966 				goto error;
1967 			}
1968 		}
1969 	} else if (BP_HAS_NO_PKT(bp)) {
1970 		struct udcd_cmd *tscmdp;
1971 		struct dcd_cmd *tcmdp;
1972 		/*
1973 		 * This indicates that it is a special buffer
1974 		 * This could be a udcd-cmd and hence call bp_mapin just
1975 		 * in case that it could be a PIO command issued.
1976 		 */
1977 		tscmdp = (struct udcd_cmd *)bp->b_forw;
1978 		tcmdp = tscmdp->udcd_cmd;
1979 		if ((tcmdp->cmd != ATA_READ_DMA) && (tcmdp->cmd != 0xc9) &&
1980 		    (tcmdp->cmd != ATA_WRITE_DMA) && (tcmdp->cmd != 0xcb) &&
1981 		    (tcmdp->cmd != IDENTIFY_DMA) &&
1982 		    (tcmdp->cmd != ATA_FLUSH_CACHE)) {
1983 			bp_mapin(bp);
1984 		}
1985 	}
1986 
1987 	/*
1988 	 * We are doing it a bit non-standard. That is, the
1989 	 * head of the b_actf chain is *not* the active command-
1990 	 * it is just the head of the wait queue. The reason
1991 	 * we do this is that the head of the b_actf chain is
1992 	 * guaranteed to not be moved by disksort(), so that
1993 	 * our restart command (pointed to by
1994 	 * b_forw) and the head of the wait queue (b_actf) can
1995 	 * have resources granted without it getting lost in
1996 	 * the queue at some later point (where we would have
1997 	 * to go and look for it).
1998 	 */
1999 	mutex_enter(DCD_MUTEX);
2000 
2001 	DCD_DO_KSTATS(un, kstat_waitq_enter, bp);
2002 
2003 	dp = &un->un_utab;
2004 
2005 	if (dp->b_actf == NULL) {
2006 		dp->b_actf = bp;
2007 		dp->b_actl = bp;
2008 	} else if ((un->un_state == DCD_STATE_SUSPENDED) &&
2009 	    bp == un->un_sbufp) {
2010 		bp->b_actf = dp->b_actf;
2011 		dp->b_actf = bp;
2012 	} else {
2013 		TRACE_3(TR_FAC_DADA, TR_DCDSTRATEGY_DISKSORT_START,
2014 		    "dcdstrategy_disksort_start: dp 0x%p bp 0x%p un 0x%p",
2015 		    dp, bp, un);
2016 		disksort(dp, bp);
2017 		TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_DISKSORT_END,
2018 		    "dcdstrategy_disksort_end");
2019 	}
2020 
2021 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2022 	    "ncmd %x , throttle %x, forw 0x%p\n",
2023 	    un->un_ncmds, un->un_throttle, (void *)dp->b_forw);
2024 	ASSERT(un->un_ncmds >= 0);
2025 	ASSERT(un->un_throttle >= 0);
2026 	if ((un->un_ncmds < un->un_throttle) && (dp->b_forw == NULL)) {
2027 		dcdstart(un);
2028 	} else if (BP_HAS_NO_PKT(dp->b_actf)) {
2029 		struct buf *cmd_bp;
2030 
2031 		cmd_bp = dp->b_actf;
2032 		cmd_bp->av_back = ALLOCATING_PKT;
2033 		mutex_exit(DCD_MUTEX);
2034 		/*
2035 		 * try and map this one
2036 		 */
2037 		TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_SMALL_WINDOW_START,
2038 		    "dcdstrategy_small_window_call (begin)");
2039 
2040 		make_dcd_cmd(un, cmd_bp, NULL_FUNC);
2041 
2042 		TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_SMALL_WINDOW_END,
2043 		    "dcdstrategy_small_window_call (end)");
2044 
2045 		/*
2046 		 * there is a small window where the active cmd
2047 		 * completes before make_dcd_cmd returns.
2048 		 * consequently, this cmd never gets started so
2049 		 * we start it from here
2050 		 */
2051 		mutex_enter(DCD_MUTEX);
2052 		if ((un->un_ncmds < un->un_throttle) &&
2053 		    (dp->b_forw == NULL)) {
2054 			dcdstart(un);
2055 		}
2056 	}
2057 	mutex_exit(DCD_MUTEX);
2058 
2059 done:
2060 	TRACE_0(TR_FAC_DADA, TR_DCDSTRATEGY_END, "dcdstrategy_end");
2061 	return (0);
2062 }
2063 
2064 
2065 /*
2066  * Unit start and Completion
2067  * NOTE: we assume that the caller has at least checked for:
2068  *		(un->un_ncmds < un->un_throttle)
2069  *	if not, there is no real harm done, dcd_transport() will
2070  *	return BUSY
2071  */
2072 static void
2073 dcdstart(struct dcd_disk *un)
2074 {
2075 	int status, sort_key;
2076 	struct buf *bp;
2077 	struct diskhd *dp;
2078 	uchar_t state = un->un_last_state;
2079 
2080 	TRACE_1(TR_FAC_DADA, TR_DCDSTART_START, "dcdstart_start: un 0x%p", un);
2081 
2082 retry:
2083 	ASSERT(mutex_owned(DCD_MUTEX));
2084 
2085 	dp = &un->un_utab;
2086 	if (((bp = dp->b_actf) == NULL) || (bp->av_back == ALLOCATING_PKT) ||
2087 	    (dp->b_forw != NULL)) {
2088 		TRACE_0(TR_FAC_DADA, TR_DCDSTART_NO_WORK_END,
2089 		    "dcdstart_end (no work)");
2090 		return;
2091 	}
2092 
2093 	/*
2094 	 * remove from active queue
2095 	 */
2096 	dp->b_actf = bp->b_actf;
2097 	bp->b_actf = 0;
2098 
2099 	/*
2100 	 * increment ncmds before calling dcd_transport because dcdintr
2101 	 * may be called before we return from dcd_transport!
2102 	 */
2103 	un->un_ncmds++;
2104 
2105 	/*
2106 	 * If measuring stats, mark exit from wait queue and
2107 	 * entrance into run 'queue' if and only if we are
2108 	 * going to actually start a command.
2109 	 * Normally the bp already has a packet at this point
2110 	 */
2111 	DCD_DO_KSTATS(un, kstat_waitq_to_runq, bp);
2112 
2113 	mutex_exit(DCD_MUTEX);
2114 
2115 	if (BP_HAS_NO_PKT(bp)) {
2116 		make_dcd_cmd(un, bp, dcdrunout);
2117 		if (BP_HAS_NO_PKT(bp) && !(bp->b_flags & B_ERROR)) {
2118 			mutex_enter(DCD_MUTEX);
2119 			DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
2120 
2121 			bp->b_actf = dp->b_actf;
2122 			dp->b_actf = bp;
2123 			New_state(un, DCD_STATE_RWAIT);
2124 			un->un_ncmds--;
2125 			TRACE_0(TR_FAC_DADA, TR_DCDSTART_NO_RESOURCES_END,
2126 			    "dcdstart_end (No Resources)");
2127 			goto done;
2128 
2129 		} else if (bp->b_flags & B_ERROR) {
2130 			mutex_enter(DCD_MUTEX);
2131 			DCD_DO_KSTATS(un, kstat_runq_exit, bp);
2132 
2133 			un->un_ncmds--;
2134 			bp->b_resid = bp->b_bcount;
2135 			if (bp->b_error == 0) {
2136 				SET_BP_ERROR(bp, EIO);
2137 			}
2138 
2139 			/*
2140 			 * restore old state
2141 			 */
2142 			un->un_state = un->un_last_state;
2143 			un->un_last_state = state;
2144 
2145 			mutex_exit(DCD_MUTEX);
2146 
2147 			biodone(bp);
2148 			mutex_enter(DCD_MUTEX);
2149 			if (un->un_state == DCD_STATE_SUSPENDED) {
2150 				cv_broadcast(&un->un_disk_busy_cv);
2151 			}
2152 
2153 			if ((un->un_ncmds < un->un_throttle) &&
2154 			    (dp->b_forw == NULL)) {
2155 				goto retry;
2156 			} else {
2157 				goto done;
2158 			}
2159 		}
2160 	}
2161 
2162 	/*
2163 	 * Restore resid from the packet, b_resid had been the
2164 	 * disksort key.
2165 	 */
2166 	sort_key = bp->b_resid;
2167 	bp->b_resid = BP_PKT(bp)->pkt_resid;
2168 	BP_PKT(bp)->pkt_resid = 0;
2169 
2170 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2171 	    "bp->b_resid %lx, pkt_resid %lx\n",
2172 	    bp->b_resid, BP_PKT(bp)->pkt_resid);
2173 
2174 	/*
2175 	 * We used to check whether or not to try and link commands here.
2176 	 * Since we have found that there is no performance improvement
2177 	 * for linked commands, this has not made much sense.
2178 	 */
2179 	if ((status = dcd_transport((struct dcd_pkt *)BP_PKT(bp)))
2180 	    != TRAN_ACCEPT) {
2181 		mutex_enter(DCD_MUTEX);
2182 		un->un_ncmds--;
2183 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2184 		    "transport returned %x\n", status);
2185 		if (status == TRAN_BUSY) {
2186 			DCD_DO_ERRSTATS(un, dcd_transerrs);
2187 			DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
2188 			dcd_handle_tran_busy(bp, dp, un);
2189 			if (un->un_ncmds > 0) {
2190 				bp->b_resid = sort_key;
2191 			}
2192 		} else {
2193 			DCD_DO_KSTATS(un, kstat_runq_exit, bp);
2194 			mutex_exit(DCD_MUTEX);
2195 
2196 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2197 			    "transport rejected (%d)\n",
2198 			    status);
2199 			SET_BP_ERROR(bp, EIO);
2200 			bp->b_resid = bp->b_bcount;
2201 			if (bp != un->un_sbufp) {
2202 				dcd_destroy_pkt(BP_PKT(bp));
2203 			}
2204 			biodone(bp);
2205 
2206 			mutex_enter(DCD_MUTEX);
2207 			if (un->un_state == DCD_STATE_SUSPENDED) {
2208 				cv_broadcast(&un->un_disk_busy_cv);
2209 			}
2210 			if ((un->un_ncmds < un->un_throttle) &&
2211 			    (dp->b_forw == NULL)) {
2212 					goto retry;
2213 			}
2214 		}
2215 	} else {
2216 		mutex_enter(DCD_MUTEX);
2217 
2218 		if (dp->b_actf && BP_HAS_NO_PKT(dp->b_actf)) {
2219 			struct buf *cmd_bp;
2220 
2221 			cmd_bp = dp->b_actf;
2222 			cmd_bp->av_back = ALLOCATING_PKT;
2223 			mutex_exit(DCD_MUTEX);
2224 			/*
2225 			 * try and map this one
2226 			 */
2227 			TRACE_0(TR_FAC_DADA, TR_DCASTART_SMALL_WINDOW_START,
2228 			    "dcdstart_small_window_start");
2229 
2230 			make_dcd_cmd(un, cmd_bp, NULL_FUNC);
2231 
2232 			TRACE_0(TR_FAC_DADA, TR_DCDSTART_SMALL_WINDOW_END,
2233 			    "dcdstart_small_window_end");
2234 			/*
2235 			 * there is a small window where the active cmd
2236 			 * completes before make_dcd_cmd returns.
2237 			 * consequently, this cmd never gets started so
2238 			 * we start it from here
2239 			 */
2240 			mutex_enter(DCD_MUTEX);
2241 			if ((un->un_ncmds < un->un_throttle) &&
2242 			    (dp->b_forw == NULL)) {
2243 				goto retry;
2244 			}
2245 		}
2246 	}
2247 
2248 done:
2249 	ASSERT(mutex_owned(DCD_MUTEX));
2250 	TRACE_0(TR_FAC_DADA, TR_DCDSTART_END, "dcdstart_end");
2251 }
2252 
2253 /*
2254  * make_dcd_cmd: create a pkt
2255  */
2256 static void
2257 make_dcd_cmd(struct dcd_disk *un, struct buf *bp, int (*func)())
2258 {
2259 	auto int count, com, direction;
2260 	struct dcd_pkt *pkt;
2261 	int flags, tval;
2262 
2263 	_NOTE(DATA_READABLE_WITHOUT_LOCK(dcd_disk::un_dp))
2264 	TRACE_3(TR_FAC_DADA, TR_MAKE_DCD_CMD_START,
2265 	    "make_dcd_cmd_start: un 0x%p bp 0x%p un 0x%p", un, bp, un);
2266 
2267 
2268 	flags = un->un_cmd_flags;
2269 
2270 	if (bp != un->un_sbufp) {
2271 		int partition = DCDPART(bp->b_edev);
2272 		diskaddr_t p_lblksrt;
2273 		diskaddr_t lblocks;
2274 		long secnt;
2275 		uint32_t blkno;
2276 		int dkl_nblk, delta;
2277 		long resid;
2278 
2279 		if (cmlb_partinfo(un->un_dklbhandle,
2280 		    partition,
2281 		    &lblocks,
2282 		    &p_lblksrt,
2283 		    NULL,
2284 		    NULL,
2285 		    0) != NULL) {
2286 			lblocks = 0;
2287 			p_lblksrt = 0;
2288 		}
2289 
2290 		dkl_nblk = (int)lblocks;
2291 
2292 		/*
2293 		 * Make sure we don't run off the end of a partition.
2294 		 *
2295 		 * Put this test here so that we can adjust b_count
2296 		 * to accurately reflect the actual amount we are
2297 		 * goint to transfer.
2298 		 */
2299 
2300 		/*
2301 		 * First, compute partition-relative block number
2302 		 */
2303 		blkno = dkblock(bp);
2304 		secnt = (bp->b_bcount + (un->un_secsize - 1)) >> un->un_secdiv;
2305 		count = MIN(secnt, dkl_nblk - blkno);
2306 		if (count != secnt) {
2307 			/*
2308 			 * We have an overrun
2309 			 */
2310 			resid = (secnt - count) << un->un_secdiv;
2311 			DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2312 			    "overrun by %ld sectors\n",
2313 			    secnt - count);
2314 			bp->b_bcount -= resid;
2315 		} else {
2316 			resid = 0;
2317 		}
2318 
2319 		/*
2320 		 * Adjust block number to absolute
2321 		 */
2322 		delta = (int)p_lblksrt;
2323 		blkno += delta;
2324 
2325 		mutex_enter(DCD_MUTEX);
2326 		/*
2327 		 * This is for devices having block size different from
2328 		 * from DEV_BSIZE (e.g. 2K CDROMs).
2329 		 */
2330 		if (un->un_lbasize != un->un_secsize) {
2331 			blkno >>= un->un_blknoshift;
2332 			count >>= un->un_blknoshift;
2333 		}
2334 		mutex_exit(DCD_MUTEX);
2335 
2336 		TRACE_0(TR_FAC_DADA, TR_MAKE_DCD_CMD_INIT_PKT_START,
2337 		    "make_dcd_cmd_init_pkt_call (begin)");
2338 		pkt = dcd_init_pkt(ROUTE, NULL, bp,
2339 		    (uint32_t)sizeof (struct dcd_cmd),
2340 		    un->un_cmd_stat_size, PP_LEN, PKT_CONSISTENT,
2341 		    func, (caddr_t)un);
2342 		TRACE_1(TR_FAC_DADA, TR_MAKE_DCD_CMD_INIT_PKT_END,
2343 		    "make_dcd_cmd_init_pkt_call (end): pkt 0x%p", pkt);
2344 		if (!pkt) {
2345 			bp->b_bcount += resid;
2346 			bp->av_back = NO_PKT_ALLOCATED;
2347 			TRACE_0(TR_FAC_DADA,
2348 			    TR_MAKE_DCD_CMD_NO_PKT_ALLOCATED1_END,
2349 			    "make_dcd_cmd_end (NO_PKT_ALLOCATED1)");
2350 			return;
2351 		}
2352 		if (bp->b_flags & B_READ) {
2353 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
2354 			    DMA_SUPPORTTED) {
2355 				com = ATA_READ_DMA;
2356 			} else {
2357 				if (un->un_dp->options & BLOCK_MODE)
2358 					com = ATA_READ_MULTIPLE;
2359 				else
2360 					com = ATA_READ;
2361 			}
2362 			direction = DATA_READ;
2363 		} else {
2364 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
2365 			    DMA_SUPPORTTED) {
2366 				com = ATA_WRITE_DMA;
2367 			} else {
2368 				if (un->un_dp->options & BLOCK_MODE)
2369 					com = ATA_WRITE_MULTIPLE;
2370 				else
2371 					com = ATA_WRITE;
2372 			}
2373 			direction = DATA_WRITE;
2374 		}
2375 
2376 		/*
2377 		 * Save the resid in the packet, temporarily until
2378 		 * we transport the command.
2379 		 */
2380 		pkt->pkt_resid = resid;
2381 
2382 		makecommand(pkt, flags, com, blkno, ADD_LBA_MODE,
2383 		    bp->b_bcount, direction, 0);
2384 		tval = dcd_io_time;
2385 	} else {
2386 
2387 		struct udcd_cmd *scmd = (struct udcd_cmd *)bp->b_forw;
2388 
2389 		/*
2390 		 * set options
2391 		 */
2392 		if ((scmd->udcd_flags & UDCD_SILENT) && !(DEBUGGING)) {
2393 			flags |= FLAG_SILENT;
2394 		}
2395 		if (scmd->udcd_flags &  UDCD_DIAGNOSE)
2396 			flags |= FLAG_DIAGNOSE;
2397 
2398 		if (scmd->udcd_flags & UDCD_NOINTR)
2399 			flags |= FLAG_NOINTR;
2400 
2401 		pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
2402 		    (bp->b_bcount)? bp: NULL,
2403 		    (uint32_t)sizeof (struct dcd_cmd),
2404 		    2, PP_LEN, PKT_CONSISTENT, func, (caddr_t)un);
2405 
2406 		if (!pkt) {
2407 			bp->av_back = NO_PKT_ALLOCATED;
2408 			return;
2409 		}
2410 
2411 		makecommand(pkt, 0, scmd->udcd_cmd->cmd,
2412 		    scmd->udcd_cmd->sector_num.lba_num,
2413 		    scmd->udcd_cmd->address_mode,
2414 		    scmd->udcd_cmd->size,
2415 		    scmd->udcd_cmd->direction, scmd->udcd_cmd->features);
2416 
2417 		pkt->pkt_flags = flags;
2418 		if (scmd->udcd_timeout == 0)
2419 			tval = dcd_io_time;
2420 		else
2421 			tval = scmd->udcd_timeout;
2422 		/* UDAD interface should be decided. */
2423 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2424 		    "udcd interface\n");
2425 	}
2426 
2427 	pkt->pkt_comp = dcdintr;
2428 	pkt->pkt_time = tval;
2429 	PKT_SET_BP(pkt, bp);
2430 	bp->av_back = (struct buf *)pkt;
2431 
2432 	TRACE_0(TR_FAC_DADA, TR_MAKE_DCD_CMD_END, "make_dcd_cmd_end");
2433 }
2434 
2435 /*
2436  * Command completion processing
2437  */
2438 static void
2439 dcdintr(struct dcd_pkt *pkt)
2440 {
2441 	struct dcd_disk *un;
2442 	struct buf *bp;
2443 	int action;
2444 	int status;
2445 
2446 	bp = PKT_GET_BP(pkt);
2447 	un = ddi_get_soft_state(dcd_state, DCDUNIT(bp->b_edev));
2448 
2449 	TRACE_1(TR_FAC_DADA, TR_DCDINTR_START, "dcdintr_start: un 0x%p", un);
2450 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdintr\n");
2451 
2452 	mutex_enter(DCD_MUTEX);
2453 	un->un_ncmds--;
2454 	DCD_DO_KSTATS(un, kstat_runq_exit, bp);
2455 	ASSERT(un->un_ncmds >= 0);
2456 
2457 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2458 	    "reason %x and Status %x\n", pkt->pkt_reason, SCBP_C(pkt));
2459 
2460 	/*
2461 	 * do most common case first
2462 	 */
2463 	if ((pkt->pkt_reason == CMD_CMPLT) && (SCBP_C(pkt) == 0)) {
2464 		int com = GETATACMD((struct dcd_cmd *)pkt->pkt_cdbp);
2465 
2466 		if (un->un_state == DCD_STATE_OFFLINE) {
2467 			un->un_state = un->un_last_state;
2468 			dcd_log(DCD_DEVINFO, dcd_label, CE_NOTE,
2469 			    (const char *) diskokay);
2470 		}
2471 		/*
2472 		 * If the command is a read or a write, and we have
2473 		 * a non-zero pkt_resid, that is an error. We should
2474 		 * attempt to retry the operation if possible.
2475 		 */
2476 		action = COMMAND_DONE;
2477 		if (pkt->pkt_resid && (com == ATA_READ || com == ATA_WRITE)) {
2478 			DCD_DO_ERRSTATS(un, dcd_harderrs);
2479 			if ((int)PKT_GET_RETRY_CNT(pkt) < dcd_retry_count) {
2480 				PKT_INCR_RETRY_CNT(pkt, 1);
2481 				action = QUE_COMMAND;
2482 			} else {
2483 				/*
2484 				 * if we have exhausted retries
2485 				 * a command with a residual is in error in
2486 				 * this case.
2487 				 */
2488 				action = COMMAND_DONE_ERROR;
2489 			}
2490 			dcd_log(DCD_DEVINFO, dcd_label,
2491 			    CE_WARN, "incomplete %s- %s\n",
2492 			    (bp->b_flags & B_READ)? "read" : "write",
2493 			    (action == QUE_COMMAND)? "retrying" :
2494 			    "giving up");
2495 		}
2496 
2497 		/*
2498 		 * pkt_resid will reflect, at this point, a residual
2499 		 * of how many bytes left to be transferred there were
2500 		 * from the actual scsi command. Add this to b_resid i.e
2501 		 * the amount this driver could not see to transfer,
2502 		 * to get the total number of bytes not transfered.
2503 		 */
2504 		if (action != QUE_COMMAND) {
2505 			bp->b_resid += pkt->pkt_resid;
2506 		}
2507 
2508 	} else if (pkt->pkt_reason != CMD_CMPLT) {
2509 		action = dcd_handle_incomplete(un, bp);
2510 	}
2511 
2512 	/*
2513 	 * If we are in the middle of syncing or dumping, we have got
2514 	 * here because dcd_transport has called us explictly after
2515 	 * completing the command in a polled mode. We don't want to
2516 	 * have a recursive call into dcd_transport again.
2517 	 */
2518 	if (ddi_in_panic() && (action == QUE_COMMAND)) {
2519 		action = COMMAND_DONE_ERROR;
2520 	}
2521 
2522 	/*
2523 	 * save pkt reason; consecutive failures are not reported unless
2524 	 * fatal
2525 	 * do not reset last_pkt_reason when the cmd was retried and
2526 	 * succeeded because
2527 	 * there maybe more commands comming back with last_pkt_reason
2528 	 */
2529 	if ((un->un_last_pkt_reason != pkt->pkt_reason) &&
2530 	    ((pkt->pkt_reason != CMD_CMPLT) ||
2531 	    (PKT_GET_RETRY_CNT(pkt) == 0))) {
2532 		un->un_last_pkt_reason = pkt->pkt_reason;
2533 	}
2534 
2535 	switch (action) {
2536 	case COMMAND_DONE_ERROR:
2537 error:
2538 		if (bp->b_resid == 0) {
2539 			bp->b_resid = bp->b_bcount;
2540 		}
2541 		if (bp->b_error == 0) {
2542 			struct	dcd_cmd *cdbp = (struct dcd_cmd *)pkt->pkt_cdbp;
2543 			if (cdbp->cmd == ATA_FLUSH_CACHE &&
2544 			    (pkt->pkt_scbp[0] & STATUS_ATA_ERR) &&
2545 			    (pkt->pkt_scbp[1] & ERR_ABORT)) {
2546 				SET_BP_ERROR(bp, ENOTSUP);
2547 				un->un_flush_not_supported = 1;
2548 			} else {
2549 				SET_BP_ERROR(bp, EIO);
2550 			}
2551 		}
2552 		bp->b_flags |= B_ERROR;
2553 		/*FALLTHROUGH*/
2554 	case COMMAND_DONE:
2555 		dcddone_and_mutex_exit(un, bp);
2556 
2557 		TRACE_0(TR_FAC_DADA, TR_DCDINTR_COMMAND_DONE_END,
2558 		    "dcdintr_end (COMMAND_DONE)");
2559 		return;
2560 
2561 	case QUE_COMMAND:
2562 		if (un->un_ncmds >= un->un_throttle) {
2563 			struct diskhd *dp = &un->un_utab;
2564 
2565 			bp->b_actf = dp->b_actf;
2566 			dp->b_actf = bp;
2567 
2568 			DCD_DO_KSTATS(un, kstat_waitq_enter, bp);
2569 
2570 			mutex_exit(DCD_MUTEX);
2571 			goto exit;
2572 		}
2573 
2574 		un->un_ncmds++;
2575 		/* reset the pkt reason again */
2576 		pkt->pkt_reason = 0;
2577 		DCD_DO_KSTATS(un, kstat_runq_enter, bp);
2578 		mutex_exit(DCD_MUTEX);
2579 		if ((status = dcd_transport(BP_PKT(bp))) != TRAN_ACCEPT) {
2580 			struct diskhd *dp = &un->un_utab;
2581 
2582 			mutex_enter(DCD_MUTEX);
2583 			un->un_ncmds--;
2584 			if (status == TRAN_BUSY) {
2585 				DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
2586 				dcd_handle_tran_busy(bp, dp, un);
2587 				mutex_exit(DCD_MUTEX);
2588 				goto exit;
2589 			}
2590 			DCD_DO_ERRSTATS(un, dcd_transerrs);
2591 			DCD_DO_KSTATS(un, kstat_runq_exit, bp);
2592 
2593 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2594 			    "requeue of command fails (%x)\n", status);
2595 			SET_BP_ERROR(bp, EIO);
2596 			bp->b_resid = bp->b_bcount;
2597 
2598 			dcddone_and_mutex_exit(un, bp);
2599 			goto exit;
2600 		}
2601 		break;
2602 
2603 	case JUST_RETURN:
2604 	default:
2605 		DCD_DO_KSTATS(un, kstat_waitq_enter, bp);
2606 		mutex_exit(DCD_MUTEX);
2607 		break;
2608 	}
2609 
2610 exit:
2611 	TRACE_0(TR_FAC_DADA, TR_DCDINTR_END, "dcdintr_end");
2612 }
2613 
2614 
2615 /*
2616  * Done with a command.
2617  */
2618 static void
2619 dcddone_and_mutex_exit(struct dcd_disk *un, register struct buf *bp)
2620 {
2621 	struct diskhd *dp;
2622 
2623 	TRACE_1(TR_FAC_DADA, TR_DCDONE_START, "dcddone_start: un 0x%p", un);
2624 
2625 	_NOTE(LOCK_RELEASED_AS_SIDE_EFFECT(&un->un_dcd->dcd_mutex));
2626 
2627 	dp = &un->un_utab;
2628 	if (bp == dp->b_forw) {
2629 		dp->b_forw = NULL;
2630 	}
2631 
2632 	if (un->un_stats) {
2633 		ulong_t n_done = bp->b_bcount - bp->b_resid;
2634 		if (bp->b_flags & B_READ) {
2635 			IOSP->reads++;
2636 			IOSP->nread += n_done;
2637 		} else {
2638 			IOSP->writes++;
2639 			IOSP->nwritten += n_done;
2640 		}
2641 	}
2642 	if (IO_PARTITION_STATS) {
2643 		ulong_t n_done = bp->b_bcount - bp->b_resid;
2644 		if (bp->b_flags & B_READ) {
2645 			IOSP_PARTITION->reads++;
2646 			IOSP_PARTITION->nread += n_done;
2647 		} else {
2648 			IOSP_PARTITION->writes++;
2649 			IOSP_PARTITION->nwritten += n_done;
2650 		}
2651 	}
2652 
2653 	/*
2654 	 * Start the next one before releasing resources on this one
2655 	 */
2656 	if (un->un_state == DCD_STATE_SUSPENDED) {
2657 		cv_broadcast(&un->un_disk_busy_cv);
2658 	} else if (dp->b_actf && (un->un_ncmds < un->un_throttle) &&
2659 	    (dp->b_forw == NULL && un->un_state != DCD_STATE_SUSPENDED)) {
2660 		dcdstart(un);
2661 	}
2662 
2663 	mutex_exit(DCD_MUTEX);
2664 
2665 	if (bp != un->un_sbufp) {
2666 		dcd_destroy_pkt(BP_PKT(bp));
2667 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2668 		    "regular done: resid %ld\n", bp->b_resid);
2669 	} else {
2670 		ASSERT(un->un_sbuf_busy);
2671 	}
2672 	TRACE_0(TR_FAC_DADA, TR_DCDDONE_BIODONE_CALL, "dcddone_biodone_call");
2673 
2674 	biodone(bp);
2675 
2676 	(void) pm_idle_component(DCD_DEVINFO, 0);
2677 
2678 	TRACE_0(TR_FAC_DADA, TR_DCDDONE_END, "dcddone end");
2679 }
2680 
2681 
2682 /*
2683  * reset the disk unless the transport layer has already
2684  * cleared the problem
2685  */
2686 #define	C1	(STAT_ATA_BUS_RESET|STAT_ATA_DEV_RESET|STAT_ATA_ABORTED)
2687 static void
2688 dcd_reset_disk(struct dcd_disk *un, struct dcd_pkt *pkt)
2689 {
2690 
2691 	if ((pkt->pkt_statistics & C1) == 0) {
2692 		mutex_exit(DCD_MUTEX);
2693 		if (!dcd_reset(ROUTE, RESET_ALL)) {
2694 			DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2695 			    "Reset failed");
2696 		}
2697 		mutex_enter(DCD_MUTEX);
2698 	}
2699 }
2700 
2701 static int
2702 dcd_handle_incomplete(struct dcd_disk *un, struct buf *bp)
2703 {
2704 	static char *fail = "ATA transport failed: reason '%s': %s\n";
2705 	static char *notresp = "disk not responding to selection\n";
2706 	int rval = COMMAND_DONE_ERROR;
2707 	int action = COMMAND_SOFT_ERROR;
2708 	struct dcd_pkt *pkt = BP_PKT(bp);
2709 	int be_chatty = (un->un_state != DCD_STATE_SUSPENDED) &&
2710 	    (bp != un->un_sbufp || !(pkt->pkt_flags & FLAG_SILENT));
2711 
2712 	ASSERT(mutex_owned(DCD_MUTEX));
2713 
2714 	switch (pkt->pkt_reason) {
2715 
2716 	case CMD_TIMEOUT:
2717 		/*
2718 		 * This Indicates the already the HBA would  have reset
2719 		 * so Just indicate to retry the command
2720 		 */
2721 		break;
2722 
2723 	case CMD_INCOMPLETE:
2724 		action = dcd_check_error(un, bp);
2725 		DCD_DO_ERRSTATS(un, dcd_transerrs);
2726 		(void) dcd_reset_disk(un, pkt);
2727 		break;
2728 
2729 	case CMD_FATAL:
2730 		/*
2731 		 * Something drastic has gone wrong
2732 		 */
2733 		break;
2734 	case CMD_DMA_DERR:
2735 	case CMD_DATA_OVR:
2736 		/* FALLTHROUGH */
2737 
2738 	default:
2739 		/*
2740 		 * the target may still be running the	command,
2741 		 * so we should try and reset that target.
2742 		 */
2743 		DCD_DO_ERRSTATS(un, dcd_transerrs);
2744 		if ((pkt->pkt_reason != CMD_RESET) &&
2745 			(pkt->pkt_reason != CMD_ABORTED)) {
2746 			(void) dcd_reset_disk(un, pkt);
2747 		}
2748 		break;
2749 	}
2750 
2751 	/*
2752 	 * If pkt_reason is CMD_RESET/ABORTED, chances are that this pkt got
2753 	 * reset/aborted because another disk on this bus caused it.
2754 	 * The disk that caused it, should get CMD_TIMEOUT with pkt_statistics
2755 	 * of STAT_TIMEOUT/STAT_DEV_RESET
2756 	 */
2757 	if ((pkt->pkt_reason == CMD_RESET) ||(pkt->pkt_reason == CMD_ABORTED)) {
2758 		/* To be written : XXX */
2759 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2760 		    "Command aborted\n");
2761 	}
2762 
2763 	if (bp == un->un_sbufp && (pkt->pkt_flags & FLAG_DIAGNOSE)) {
2764 		rval = COMMAND_DONE_ERROR;
2765 	} else {
2766 		if ((rval == COMMAND_DONE_ERROR) &&
2767 		    (action == COMMAND_SOFT_ERROR) &&
2768 		    ((int)PKT_GET_RETRY_CNT(pkt) < dcd_retry_count)) {
2769 			PKT_INCR_RETRY_CNT(pkt, 1);
2770 			rval = QUE_COMMAND;
2771 		}
2772 	}
2773 
2774 	if (pkt->pkt_reason == CMD_INCOMPLETE && rval == COMMAND_DONE_ERROR) {
2775 		/*
2776 		 * Looks like someone turned off this shoebox.
2777 		 */
2778 		if (un->un_state != DCD_STATE_OFFLINE) {
2779 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2780 			(const char *) notresp);
2781 			New_state(un, DCD_STATE_OFFLINE);
2782 		}
2783 	} else if (pkt->pkt_reason == CMD_FATAL) {
2784 		/*
2785 		 * Suppressing the following message for the time being
2786 		 * dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2787 		 * (const char *) notresp);
2788 		 */
2789 		PKT_INCR_RETRY_CNT(pkt, 6);
2790 		rval = COMMAND_DONE_ERROR;
2791 		New_state(un, DCD_STATE_FATAL);
2792 	} else if (be_chatty) {
2793 		int in_panic = ddi_in_panic();
2794 		if (!in_panic || (rval == COMMAND_DONE_ERROR)) {
2795 			if (((pkt->pkt_reason != un->un_last_pkt_reason) &&
2796 			    (pkt->pkt_reason != CMD_RESET)) ||
2797 			    (rval == COMMAND_DONE_ERROR) ||
2798 			    (dcd_error_level == DCD_ERR_ALL)) {
2799 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2800 				    fail, dcd_rname(pkt->pkt_reason),
2801 				    (rval == COMMAND_DONE_ERROR) ?
2802 				    "giving up": "retrying command");
2803 				DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2804 				    "retrycount=%x\n",
2805 				    PKT_GET_RETRY_CNT(pkt));
2806 			}
2807 		}
2808 	}
2809 error:
2810 	return (rval);
2811 }
2812 
2813 static int
2814 dcd_check_error(struct dcd_disk *un, struct buf *bp)
2815 {
2816 	struct diskhd *dp = &un->un_utab;
2817 	struct dcd_pkt *pkt = BP_PKT(bp);
2818 	int rval = 0;
2819 	unsigned char status;
2820 	unsigned char error;
2821 
2822 	TRACE_0(TR_FAC_DADA, TR_DCD_CHECK_ERROR_START, "dcd_check_error_start");
2823 	ASSERT(mutex_owned(DCD_MUTEX));
2824 
2825 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
2826 	    "Pkt: 0x%p dp: 0x%p\n", (void *)pkt, (void *)dp);
2827 
2828 	/*
2829 	 * Here we need to check status first and then if error is indicated
2830 	 * Then the error register.
2831 	 */
2832 
2833 	status = (pkt->pkt_scbp)[0];
2834 	if ((status & STATUS_ATA_DWF) == STATUS_ATA_DWF) {
2835 		/*
2836 		 * There has been a Device Fault  - reason for such error
2837 		 * is vendor specific
2838 		 * Action to be taken is - Indicate error and reset device.
2839 		 */
2840 
2841 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN, "Device Fault\n");
2842 		rval = COMMAND_HARD_ERROR;
2843 	} else if ((status & STATUS_ATA_CORR) == STATUS_ATA_CORR) {
2844 
2845 		/*
2846 		 * The sector read or written is marginal and hence ECC
2847 		 * Correction has been applied. Indicate to repair
2848 		 * Here we need to probably re-assign based on the badblock
2849 		 * mapping.
2850 		 */
2851 
2852 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2853 		    "Soft Error on block %x\n",
2854 		    ((struct dcd_cmd *)pkt->pkt_cdbp)->sector_num.lba_num);
2855 		rval = COMMAND_SOFT_ERROR;
2856 	} else if ((status & STATUS_ATA_ERR) == STATUS_ATA_ERR) {
2857 		error = pkt->pkt_scbp[1];
2858 
2859 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2860 		    "Command:0x%x,Error:0x%x,Status:0x%x\n",
2861 		    GETATACMD((struct dcd_cmd *)pkt->pkt_cdbp),
2862 		    error, status);
2863 		if ((error &  ERR_AMNF) == ERR_AMNF) {
2864 			/* Address make not found */
2865 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2866 			    "Address Mark Not Found");
2867 		} else if ((error & ERR_TKONF) == ERR_TKONF) {
2868 			/* Track 0 Not found */
2869 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2870 			    "Track 0 Not found \n");
2871 		} else if ((error & ERR_IDNF) == ERR_IDNF) {
2872 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2873 			    " ID not found \n");
2874 		} else if ((error &  ERR_UNC) == ERR_UNC) {
2875 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2876 			    "Uncorrectable data Error: Block %x\n",
2877 		((struct dcd_cmd *)pkt->pkt_cdbp)->sector_num.lba_num);
2878 		} else if ((error & ERR_BBK) == ERR_BBK) {
2879 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2880 			    "Bad block detected: Block %x\n",
2881 			((struct dcd_cmd *)pkt->pkt_cdbp)->sector_num.lba_num);
2882 		} else if ((error & ERR_ABORT) == ERR_ABORT) {
2883 			/* Aborted Command */
2884 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2885 			    " Aborted Command \n");
2886 		}
2887 		/*
2888 		 * Return the soft error so that the command
2889 		 * will be retried.
2890 		 */
2891 		rval = COMMAND_SOFT_ERROR;
2892 	}
2893 
2894 	TRACE_0(TR_FAC_DADA, TR_DCD_CHECK_ERROR_END, "dcd_check_error_end");
2895 	return (rval);
2896 }
2897 
2898 
2899 /*
2900  *	System Crash Dump routine
2901  */
2902 
2903 #define	NDUMP_RETRIES	5
2904 
2905 static int
2906 dcddump(dev_t dev, caddr_t addr, daddr_t blkno, int nblk)
2907 {
2908 	struct dcd_pkt *pkt;
2909 	int i;
2910 	struct buf local, *bp;
2911 	int err;
2912 	unsigned char com;
2913 	diskaddr_t p_lblksrt;
2914 	diskaddr_t lblocks;
2915 
2916 	GET_SOFT_STATE(dev);
2917 #ifdef lint
2918 	part = part;
2919 #endif /* lint */
2920 
2921 	_NOTE(NOW_INVISIBLE_TO_OTHER_THREADS(*un))
2922 
2923 	if ((un->un_state & DCD_STATE_FATAL) == DCD_STATE_FATAL)
2924 		return (ENXIO);
2925 
2926 	if (cmlb_partinfo(un->un_dklbhandle, DCDPART(dev),
2927 	    &lblocks, &p_lblksrt, NULL, NULL, 0))
2928 		return (ENXIO);
2929 
2930 	if (blkno+nblk > lblocks) {
2931 		return (EINVAL);
2932 	}
2933 
2934 
2935 	if ((un->un_state == DCD_STATE_SUSPENDED) ||
2936 	    (un->un_state == DCD_STATE_PM_SUSPENDED)) {
2937 		if (pm_raise_power(DCD_DEVINFO, 0,
2938 		    DCD_DEVICE_ACTIVE) != DDI_SUCCESS) {
2939 			return (EIO);
2940 		}
2941 	}
2942 
2943 	/*
2944 	 * When cpr calls dcddump, we know that dad is in a
2945 	 * a good state, so no bus reset is required
2946 	 */
2947 	un->un_throttle = 0;
2948 
2949 	if ((un->un_state != DCD_STATE_SUSPENDED) &&
2950 	    (un->un_state != DCD_STATE_DUMPING)) {
2951 
2952 		New_state(un, DCD_STATE_DUMPING);
2953 
2954 		/*
2955 		 * Reset the bus. I'd like to not have to do this,
2956 		 * but this is the safest thing to do...
2957 		 */
2958 
2959 		if (dcd_reset(ROUTE, RESET_ALL) == 0) {
2960 			return (EIO);
2961 		}
2962 
2963 	}
2964 
2965 	blkno += p_lblksrt;
2966 
2967 	/*
2968 	 * It should be safe to call the allocator here without
2969 	 * worrying about being locked for DVMA mapping because
2970 	 * the address we're passed is already a DVMA mapping
2971 	 *
2972 	 * We are also not going to worry about semaphore ownership
2973 	 * in the dump buffer. Dumping is single threaded at present.
2974 	 */
2975 
2976 	bp = &local;
2977 	bzero((caddr_t)bp, sizeof (*bp));
2978 	bp->b_flags = B_BUSY;
2979 	bp->b_un.b_addr = addr;
2980 	bp->b_bcount = nblk << DEV_BSHIFT;
2981 	bp->b_resid = 0;
2982 
2983 	for (i = 0; i < NDUMP_RETRIES; i++) {
2984 		bp->b_flags &= ~B_ERROR;
2985 		if ((pkt = dcd_init_pkt(ROUTE, NULL, bp,
2986 		    (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
2987 		    PKT_CONSISTENT, NULL_FUNC, NULL)) != NULL) {
2988 			break;
2989 		}
2990 		if (i == 0) {
2991 			if (bp->b_flags & B_ERROR) {
2992 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2993 				    "no resources for dumping; "
2994 				    "error code: 0x%x, retrying",
2995 				    geterror(bp));
2996 			} else {
2997 				dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
2998 				    "no resources for dumping; retrying");
2999 			}
3000 		} else if (i != (NDUMP_RETRIES - 1)) {
3001 			if (bp->b_flags & B_ERROR) {
3002 				dcd_log(DCD_DEVINFO, dcd_label, CE_CONT, "no "
3003 				    "resources for dumping; error code: 0x%x, "
3004 				    "retrying\n", geterror(bp));
3005 			}
3006 		} else {
3007 			if (bp->b_flags & B_ERROR) {
3008 				dcd_log(DCD_DEVINFO, dcd_label, CE_CONT,
3009 				    "no resources for dumping; "
3010 				    "error code: 0x%x, retries failed, "
3011 				    "giving up.\n", geterror(bp));
3012 			} else {
3013 				dcd_log(DCD_DEVINFO, dcd_label, CE_CONT,
3014 				    "no resources for dumping; "
3015 				    "retries failed, giving up.\n");
3016 			}
3017 			return (EIO);
3018 		}
3019 		delay(10);
3020 	}
3021 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
3022 		com = ATA_WRITE_DMA;
3023 	} else {
3024 		if (un->un_dp->options & BLOCK_MODE)
3025 			com = ATA_WRITE_MULTIPLE;
3026 		else
3027 			com = ATA_WRITE;
3028 	}
3029 
3030 	makecommand(pkt, 0, com, blkno, ADD_LBA_MODE,
3031 	    (int)nblk*un->un_secsize, DATA_WRITE, 0);
3032 
3033 	for (err = EIO, i = 0; i < NDUMP_RETRIES && err == EIO; i++) {
3034 
3035 		if (dcd_poll(pkt) == 0) {
3036 			switch (SCBP_C(pkt)) {
3037 			case STATUS_GOOD:
3038 				if (pkt->pkt_resid == 0) {
3039 					err = 0;
3040 				}
3041 				break;
3042 			case STATUS_ATA_BUSY:
3043 				(void) dcd_reset(ROUTE, RESET_TARGET);
3044 				break;
3045 			default:
3046 				mutex_enter(DCD_MUTEX);
3047 				(void) dcd_reset_disk(un, pkt);
3048 				mutex_exit(DCD_MUTEX);
3049 				break;
3050 			}
3051 		} else if (i > NDUMP_RETRIES/2) {
3052 			(void) dcd_reset(ROUTE, RESET_ALL);
3053 		}
3054 
3055 	}
3056 	dcd_destroy_pkt(pkt);
3057 	return (err);
3058 }
3059 
3060 /*
3061  * This routine implements the ioctl calls.  It is called
3062  * from the device switch at normal priority.
3063  */
3064 /* ARGSUSED3 */
3065 static int
3066 dcdioctl(dev_t dev, int cmd, intptr_t arg, int flag,
3067 	cred_t *cred_p, int *rval_p)
3068 {
3069 	auto int32_t data[512 / (sizeof (int32_t))];
3070 	struct dk_cinfo *info;
3071 	struct dk_minfo media_info;
3072 	struct udcd_cmd *scmd;
3073 	int i, err;
3074 	enum uio_seg uioseg = 0;
3075 	enum dkio_state state = 0;
3076 #ifdef _MULTI_DATAMODEL
3077 	struct dadkio_rwcmd rwcmd;
3078 #endif
3079 	struct dadkio_rwcmd32 rwcmd32;
3080 	struct dcd_cmd dcdcmd;
3081 
3082 	GET_SOFT_STATE(dev);
3083 #ifdef lint
3084 	part = part;
3085 	state = state;
3086 	uioseg = uioseg;
3087 #endif  /* lint */
3088 
3089 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
3090 	    "dcd_ioctl : cmd %x, arg %lx\n", cmd, arg);
3091 
3092 	bzero((caddr_t)data, sizeof (data));
3093 
3094 	switch (cmd) {
3095 
3096 #ifdef DCDDEBUG
3097 /*
3098  * Following ioctl are for testing RESET/ABORTS
3099  */
3100 #define	DKIOCRESET	(DKIOC|14)
3101 #define	DKIOCABORT	(DKIOC|15)
3102 
3103 	case DKIOCRESET:
3104 		if (ddi_copyin((caddr_t)arg, (caddr_t)data, 4, flag))
3105 			return (EFAULT);
3106 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
3107 		    "DKIOCRESET: data = 0x%x\n", data[0]);
3108 		if (dcd_reset(ROUTE, data[0])) {
3109 			return (0);
3110 		} else {
3111 			return (EIO);
3112 		}
3113 	case DKIOCABORT:
3114 		DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG,
3115 		    "DKIOCABORT:\n");
3116 		if (dcd_abort(ROUTE, (struct dcd_pkt *)0)) {
3117 			return (0);
3118 		} else {
3119 			return (EIO);
3120 		}
3121 #endif
3122 
3123 	case DKIOCINFO:
3124 		/*
3125 		 * Controller Information
3126 		 */
3127 		info = (struct dk_cinfo *)data;
3128 
3129 		mutex_enter(DCD_MUTEX);
3130 		switch (un->un_dp->ctype) {
3131 		default:
3132 			info->dki_ctype = DKC_DIRECT;
3133 			break;
3134 		}
3135 		mutex_exit(DCD_MUTEX);
3136 		info->dki_cnum = ddi_get_instance(ddi_get_parent(DCD_DEVINFO));
3137 		(void) strcpy(info->dki_cname,
3138 		    ddi_get_name(ddi_get_parent(DCD_DEVINFO)));
3139 		/*
3140 		 * Unit Information
3141 		 */
3142 		info->dki_unit = ddi_get_instance(DCD_DEVINFO);
3143 		info->dki_slave = (Tgt(DCD_DCD_DEVP)<<3);
3144 		(void) strcpy(info->dki_dname, ddi_driver_name(DCD_DEVINFO));
3145 		info->dki_flags = DKI_FMTVOL;
3146 		info->dki_partition = DCDPART(dev);
3147 
3148 		/*
3149 		 * Max Transfer size of this device in blocks
3150 		 */
3151 		info->dki_maxtransfer = un->un_max_xfer_size / DEV_BSIZE;
3152 
3153 		/*
3154 		 * We can't get from here to there yet
3155 		 */
3156 		info->dki_addr = 0;
3157 		info->dki_space = 0;
3158 		info->dki_prio = 0;
3159 		info->dki_vec = 0;
3160 
3161 		i = sizeof (struct dk_cinfo);
3162 		if (ddi_copyout((caddr_t)data, (caddr_t)arg, i, flag))
3163 			return (EFAULT);
3164 		else
3165 			return (0);
3166 
3167 	case DKIOCGMEDIAINFO:
3168 		/*
3169 		 * As dad target driver is used for IDE disks only
3170 		 * Can keep the return value hardcoded to FIXED_DISK
3171 		 */
3172 		media_info.dki_media_type = DK_FIXED_DISK;
3173 
3174 		mutex_enter(DCD_MUTEX);
3175 		media_info.dki_lbsize = un->un_lbasize;
3176 		media_info.dki_capacity = un->un_diskcapacity;
3177 		mutex_exit(DCD_MUTEX);
3178 
3179 		if (ddi_copyout(&media_info, (caddr_t)arg,
3180 		    sizeof (struct dk_minfo), flag))
3181 			return (EFAULT);
3182 		else
3183 			return (0);
3184 
3185 	case DKIOCGGEOM:
3186 	case DKIOCGVTOC:
3187 	case DKIOCGETEFI:
3188 
3189 		mutex_enter(DCD_MUTEX);
3190 		if (un->un_ncmds == 0) {
3191 			if ((err = dcd_unit_ready(dev)) != 0) {
3192 				mutex_exit(DCD_MUTEX);
3193 				return (err);
3194 			}
3195 		}
3196 
3197 		mutex_exit(DCD_MUTEX);
3198 		err = cmlb_ioctl(un->un_dklbhandle, dev, cmd,
3199 		    arg, flag, cred_p, rval_p, 0);
3200 		return (err);
3201 
3202 	case DKIOCGAPART:
3203 	case DKIOCSAPART:
3204 	case DKIOCSGEOM:
3205 	case DKIOCSVTOC:
3206 	case DKIOCSETEFI:
3207 	case DKIOCPARTITION:
3208 	case DKIOCPARTINFO:
3209 	case DKIOCGMBOOT:
3210 	case DKIOCSMBOOT:
3211 
3212 		err = cmlb_ioctl(un->un_dklbhandle, dev, cmd,
3213 		    arg, flag, cred_p, rval_p, 0);
3214 		return (err);
3215 
3216 	case DIOCTL_RWCMD:
3217 		if (drv_priv(cred_p) != 0) {
3218 			return (EPERM);
3219 		}
3220 
3221 #ifdef _MULTI_DATAMODEL
3222 		switch (ddi_model_convert_from(flag & FMODELS)) {
3223 		case DDI_MODEL_NONE:
3224 			if (ddi_copyin((caddr_t)arg, (caddr_t)&rwcmd,
3225 			    sizeof (struct dadkio_rwcmd), flag)) {
3226 				return (EFAULT);
3227 			}
3228 			rwcmd32.cmd = rwcmd.cmd;
3229 			rwcmd32.flags = rwcmd.flags;
3230 			rwcmd32.blkaddr = rwcmd.blkaddr;
3231 			rwcmd32.buflen = rwcmd.buflen;
3232 			rwcmd32.bufaddr = (caddr32_t)(uintptr_t)rwcmd.bufaddr;
3233 			break;
3234 		case DDI_MODEL_ILP32:
3235 			if (ddi_copyin((caddr_t)arg, (caddr_t)&rwcmd32,
3236 			    sizeof (struct dadkio_rwcmd32), flag)) {
3237 				return (EFAULT);
3238 			}
3239 			break;
3240 		}
3241 #else
3242 		if (ddi_copyin((caddr_t)arg, (caddr_t)&rwcmd32,
3243 		    sizeof (struct dadkio_rwcmd32), flag)) {
3244 			return (EFAULT);
3245 		}
3246 #endif
3247 		mutex_enter(DCD_MUTEX);
3248 
3249 		uioseg  = UIO_SYSSPACE;
3250 		scmd = (struct udcd_cmd *)data;
3251 		scmd->udcd_cmd = &dcdcmd;
3252 		/*
3253 		 * Convert the dadkio_rwcmd structure to udcd_cmd so that
3254 		 * it can take the normal path to get the io done
3255 		 */
3256 		if (rwcmd32.cmd == DADKIO_RWCMD_READ) {
3257 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
3258 			    DMA_SUPPORTTED)
3259 				scmd->udcd_cmd->cmd = ATA_READ_DMA;
3260 			else
3261 				scmd->udcd_cmd->cmd = ATA_READ;
3262 			scmd->udcd_cmd->address_mode = ADD_LBA_MODE;
3263 			scmd->udcd_cmd->direction = DATA_READ;
3264 			scmd->udcd_flags |= UDCD_READ|UDCD_SILENT;
3265 		} else if (rwcmd32.cmd == DADKIO_RWCMD_WRITE) {
3266 			if ((un->un_dp->options & DMA_SUPPORTTED) ==
3267 			    DMA_SUPPORTTED)
3268 				scmd->udcd_cmd->cmd = ATA_WRITE_DMA;
3269 			else
3270 				scmd->udcd_cmd->cmd = ATA_WRITE;
3271 			scmd->udcd_cmd->direction = DATA_WRITE;
3272 			scmd->udcd_flags |= UDCD_WRITE|UDCD_SILENT;
3273 		} else {
3274 			mutex_exit(DCD_MUTEX);
3275 			return (EINVAL);
3276 		}
3277 
3278 		scmd->udcd_cmd->address_mode = ADD_LBA_MODE;
3279 		scmd->udcd_cmd->features = 0;
3280 		scmd->udcd_cmd->size = rwcmd32.buflen;
3281 		scmd->udcd_cmd->sector_num.lba_num = rwcmd32.blkaddr;
3282 		scmd->udcd_bufaddr = (caddr_t)(uintptr_t)rwcmd32.bufaddr;
3283 		scmd->udcd_buflen = rwcmd32.buflen;
3284 		scmd->udcd_timeout = (ushort_t)dcd_io_time;
3285 		scmd->udcd_resid = 0ULL;
3286 		scmd->udcd_status = 0;
3287 		scmd->udcd_error_reg = 0;
3288 		scmd->udcd_status_reg = 0;
3289 
3290 		mutex_exit(DCD_MUTEX);
3291 
3292 		i = dcdioctl_cmd(dev, scmd, UIO_SYSSPACE, UIO_USERSPACE);
3293 		mutex_enter(DCD_MUTEX);
3294 		/*
3295 		 * After return convert the status from scmd to
3296 		 * dadkio_status
3297 		 */
3298 		(void) dcd_translate(&(rwcmd32.status), scmd);
3299 		rwcmd32.status.resid = scmd->udcd_resid;
3300 		mutex_exit(DCD_MUTEX);
3301 
3302 #ifdef _MULTI_DATAMODEL
3303 		switch (ddi_model_convert_from(flag & FMODELS)) {
3304 		case DDI_MODEL_NONE: {
3305 			int counter;
3306 			rwcmd.status.status = rwcmd32.status.status;
3307 			rwcmd.status.resid  = rwcmd32.status.resid;
3308 			rwcmd.status.failed_blk_is_valid =
3309 			    rwcmd32.status.failed_blk_is_valid;
3310 			rwcmd.status.failed_blk = rwcmd32.status.failed_blk;
3311 			rwcmd.status.fru_code_is_valid =
3312 			    rwcmd32.status.fru_code_is_valid;
3313 			rwcmd.status.fru_code = rwcmd32.status.fru_code;
3314 			for (counter = 0;
3315 			    counter < DADKIO_ERROR_INFO_LEN; counter++)
3316 				rwcmd.status.add_error_info[counter] =
3317 				    rwcmd32.status.add_error_info[counter];
3318 			}
3319 			/* Copy out the result back to the user program */
3320 			if (ddi_copyout((caddr_t)&rwcmd, (caddr_t)arg,
3321 			    sizeof (struct dadkio_rwcmd), flag)) {
3322 				if (i != 0) {
3323 					i = EFAULT;
3324 				}
3325 			}
3326 			break;
3327 		case DDI_MODEL_ILP32:
3328 			/* Copy out the result back to the user program */
3329 			if (ddi_copyout((caddr_t)&rwcmd32, (caddr_t)arg,
3330 			    sizeof (struct dadkio_rwcmd32), flag)) {
3331 				if (i != 0) {
3332 					i = EFAULT;
3333 				}
3334 			}
3335 			break;
3336 		}
3337 #else
3338 		/* Copy out the result back to the user program  */
3339 		if (ddi_copyout((caddr_t)&rwcmd32, (caddr_t)arg,
3340 		    sizeof (struct dadkio_rwcmd32), flag)) {
3341 			if (i != 0)
3342 				i = EFAULT;
3343 		}
3344 #endif
3345 		return (i);
3346 
3347 	case UDCDCMD:	{
3348 #ifdef	_MULTI_DATAMODEL
3349 		/*
3350 		 * For use when a 32 bit app makes a call into a
3351 		 * 64 bit ioctl
3352 		 */
3353 		struct udcd_cmd32	udcd_cmd_32_for_64;
3354 		struct udcd_cmd32	*ucmd32 = &udcd_cmd_32_for_64;
3355 		model_t			model;
3356 #endif /* _MULTI_DATAMODEL */
3357 
3358 		if (drv_priv(cred_p) != 0) {
3359 			return (EPERM);
3360 		}
3361 
3362 		scmd = (struct udcd_cmd *)data;
3363 
3364 #ifdef _MULTI_DATAMODEL
3365 		switch (model = ddi_model_convert_from(flag & FMODELS)) {
3366 		case DDI_MODEL_ILP32:
3367 			if (ddi_copyin((caddr_t)arg, ucmd32,
3368 			    sizeof (struct udcd_cmd32), flag)) {
3369 				return (EFAULT);
3370 			}
3371 			/*
3372 			 * Convert the ILP32 uscsi data from the
3373 			 * application to LP64 for internal use.
3374 			 */
3375 			udcd_cmd32toudcd_cmd(ucmd32, scmd);
3376 			break;
3377 		case DDI_MODEL_NONE:
3378 			if (ddi_copyin((caddr_t)arg, scmd, sizeof (*scmd),
3379 			    flag)) {
3380 				return (EFAULT);
3381 			}
3382 			break;
3383 		}
3384 #else /* ! _MULTI_DATAMODEL */
3385 		if (ddi_copyin((caddr_t)arg, (caddr_t)scmd,
3386 		    sizeof (*scmd), flag)) {
3387 			return (EFAULT);
3388 		}
3389 #endif /* ! _MULTI_DATAMODEL */
3390 
3391 		scmd->udcd_flags &= ~UDCD_NOINTR;
3392 		uioseg = (flag & FKIOCTL)? UIO_SYSSPACE: UIO_USERSPACE;
3393 
3394 		i = dcdioctl_cmd(dev, scmd, uioseg, uioseg);
3395 #ifdef _MULTI_DATAMODEL
3396 		switch (model) {
3397 		case DDI_MODEL_ILP32:
3398 			/*
3399 			 * Convert back to ILP32 before copyout to the
3400 			 * application
3401 			 */
3402 			udcd_cmdtoudcd_cmd32(scmd, ucmd32);
3403 			if (ddi_copyout(ucmd32, (caddr_t)arg,
3404 			    sizeof (*ucmd32), flag)) {
3405 				if (i != 0)
3406 					i = EFAULT;
3407 			}
3408 			break;
3409 		case DDI_MODEL_NONE:
3410 			if (ddi_copyout(scmd, (caddr_t)arg, sizeof (*scmd),
3411 			    flag)) {
3412 				if (i != 0)
3413 					i = EFAULT;
3414 			}
3415 			break;
3416 		}
3417 #else /* ! _MULTI_DATAMODE */
3418 		if (ddi_copyout((caddr_t)scmd, (caddr_t)arg,
3419 		    sizeof (*scmd), flag)) {
3420 			if (i != 0)
3421 				i = EFAULT;
3422 		}
3423 #endif
3424 		return (i);
3425 	}
3426 	case DKIOCFLUSHWRITECACHE:	{
3427 		struct dk_callback *dkc = (struct dk_callback *)arg;
3428 		struct dcd_pkt *pkt;
3429 		struct buf *bp;
3430 		int is_sync = 1;
3431 
3432 		mutex_enter(DCD_MUTEX);
3433 		if (un->un_flush_not_supported ||
3434 		    ! un->un_write_cache_enabled) {
3435 			i = un->un_flush_not_supported ? ENOTSUP : 0;
3436 			mutex_exit(DCD_MUTEX);
3437 			/*
3438 			 * If a callback was requested: a callback will
3439 			 * always be done if the caller saw the
3440 			 * DKIOCFLUSHWRITECACHE ioctl return 0, and
3441 			 * never done if the caller saw the ioctl return
3442 			 * an error.
3443 			 */
3444 			if ((flag & FKIOCTL) && dkc != NULL &&
3445 			    dkc->dkc_callback != NULL) {
3446 				(*dkc->dkc_callback)(dkc->dkc_cookie, i);
3447 				/*
3448 				 * Did callback and reported error.
3449 				 * Since we did a callback, ioctl
3450 				 * should return 0.
3451 				 */
3452 				i = 0;
3453 			}
3454 			return (i);
3455 		}
3456 
3457 		/*
3458 		 * Get the special buffer
3459 		 */
3460 		while (un->un_sbuf_busy) {
3461 			cv_wait(&un->un_sbuf_cv, DCD_MUTEX);
3462 		}
3463 		un->un_sbuf_busy = 1;
3464 		bp  = un->un_sbufp;
3465 		mutex_exit(DCD_MUTEX);
3466 
3467 		pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
3468 		    NULL, (uint32_t)sizeof (struct dcd_cmd),
3469 		    2, PP_LEN, PKT_CONSISTENT, SLEEP_FUNC, (caddr_t)un);
3470 		ASSERT(pkt != NULL);
3471 
3472 		makecommand(pkt, un->un_cmd_flags | FLAG_SILENT,
3473 		    ATA_FLUSH_CACHE, 0, ADD_LBA_MODE, 0, NO_DATA_XFER, 0);
3474 
3475 		pkt->pkt_comp = dcdintr;
3476 		pkt->pkt_time = DCD_FLUSH_TIME;
3477 		PKT_SET_BP(pkt, bp);
3478 
3479 		bp->av_back = (struct buf *)pkt;
3480 		bp->b_forw = NULL;
3481 		bp->b_flags = B_BUSY;
3482 		bp->b_error = 0;
3483 		bp->b_edev = dev;
3484 		bp->b_dev = cmpdev(dev);
3485 		bp->b_bcount = 0;
3486 		bp->b_blkno = 0;
3487 		bp->b_un.b_addr = 0;
3488 		bp->b_iodone = NULL;
3489 		bp->b_list = NULL;
3490 
3491 		if ((flag & FKIOCTL) && dkc != NULL &&
3492 		    dkc->dkc_callback != NULL) {
3493 			struct dk_callback *dkc2 = (struct dk_callback *)
3494 			    kmem_zalloc(sizeof (*dkc2), KM_SLEEP);
3495 			bcopy(dkc, dkc2, sizeof (*dkc2));
3496 
3497 			bp->b_list = (struct buf *)dkc2;
3498 			bp->b_iodone = dcdflushdone;
3499 			is_sync = 0;
3500 		}
3501 
3502 		(void) dcdstrategy(bp);
3503 
3504 		i = 0;
3505 		if (is_sync) {
3506 			i = biowait(bp);
3507 			(void) dcdflushdone(bp);
3508 		}
3509 
3510 		return (i);
3511 	}
3512 	default:
3513 		break;
3514 	}
3515 	return (ENOTTY);
3516 }
3517 
3518 
3519 static int
3520 dcdflushdone(struct buf *bp)
3521 {
3522 	struct dcd_disk *un = ddi_get_soft_state(dcd_state,
3523 	    DCDUNIT(bp->b_edev));
3524 	struct dcd_pkt *pkt = BP_PKT(bp);
3525 	struct dk_callback *dkc = (struct dk_callback *)bp->b_list;
3526 
3527 	ASSERT(un != NULL);
3528 	ASSERT(bp == un->un_sbufp);
3529 	ASSERT(pkt != NULL);
3530 
3531 	dcd_destroy_pkt(pkt);
3532 	bp->av_back = NO_PKT_ALLOCATED;
3533 
3534 	if (dkc != NULL) {
3535 		ASSERT(bp->b_iodone != NULL);
3536 		(*dkc->dkc_callback)(dkc->dkc_cookie, geterror(bp));
3537 		kmem_free(dkc, sizeof (*dkc));
3538 		bp->b_iodone = NULL;
3539 		bp->b_list = NULL;
3540 	}
3541 
3542 	/*
3543 	 * Tell anybody who cares that the buffer is now free
3544 	 */
3545 	mutex_enter(DCD_MUTEX);
3546 	un->un_sbuf_busy = 0;
3547 	cv_signal(&un->un_sbuf_cv);
3548 	mutex_exit(DCD_MUTEX);
3549 	return (0);
3550 }
3551 
3552 /*
3553  * dcdrunout:
3554  *	the callback function for resource allocation
3555  *
3556  * XXX it would be preferable that dcdrunout() scans the whole
3557  *	list for possible candidates for dcdstart(); this avoids
3558  *	that a bp at the head of the list whose request cannot be
3559  *	satisfied is retried again and again
3560  */
3561 /*ARGSUSED*/
3562 static int
3563 dcdrunout(caddr_t arg)
3564 {
3565 	int serviced;
3566 	struct dcd_disk *un;
3567 	struct diskhd *dp;
3568 
3569 	TRACE_1(TR_FAC_DADA, TR_DCDRUNOUT_START, "dcdrunout_start: arg 0x%p",
3570 	    arg);
3571 	serviced = 1;
3572 
3573 	un = (struct dcd_disk *)arg;
3574 	dp = &un->un_utab;
3575 
3576 	/*
3577 	 * We now support passing a structure to the callback
3578 	 * routine.
3579 	 */
3580 	ASSERT(un != NULL);
3581 	mutex_enter(DCD_MUTEX);
3582 	if ((un->un_ncmds < un->un_throttle) && (dp->b_forw == NULL)) {
3583 		dcdstart(un);
3584 	}
3585 	if (un->un_state == DCD_STATE_RWAIT) {
3586 		serviced = 0;
3587 	}
3588 	mutex_exit(DCD_MUTEX);
3589 	TRACE_1(TR_FAC_DADA, TR_DCDRUNOUT_END,
3590 	    "dcdrunout_end: serviced %d", serviced);
3591 	return (serviced);
3592 }
3593 
3594 
3595 /*
3596  * This routine called to see whether unit is (still) there. Must not
3597  * be called when un->un_sbufp is in use, and must not be called with
3598  * an unattached disk. Soft state of disk is restored to what it was
3599  * upon entry- up to caller to set the correct state.
3600  *
3601  * We enter with the disk mutex held.
3602  */
3603 
3604 /* ARGSUSED0 */
3605 static int
3606 dcd_unit_ready(dev_t dev)
3607 {
3608 #ifndef lint
3609 	auto struct udcd_cmd dcmd, *com = &dcmd;
3610 	auto struct dcd_cmd cmdblk;
3611 #endif
3612 	int error;
3613 #ifndef lint
3614 	GET_SOFT_STATE(dev);
3615 #endif
3616 
3617 	/*
3618 	 * Now that we protect the special buffer with
3619 	 * a mutex, we could probably do a mutex_tryenter
3620 	 * on it here and return failure if it were held...
3621 	 */
3622 
3623 	error = 0;
3624 	return (error);
3625 }
3626 
3627 /* ARGSUSED0 */
3628 int
3629 dcdioctl_cmd(dev_t devp, struct udcd_cmd *in, enum uio_seg cdbspace,
3630     enum uio_seg dataspace)
3631 {
3632 
3633 	struct buf *bp;
3634 	struct	udcd_cmd *scmd;
3635 	struct dcd_pkt *pkt;
3636 	int	err, rw;
3637 	caddr_t	cdb;
3638 	int	flags = 0;
3639 
3640 	GET_SOFT_STATE(devp);
3641 
3642 #ifdef lint
3643 	part = part;
3644 #endif
3645 
3646 	/*
3647 	 * Is this a request to reset the bus?
3648 	 * if so, we need to do reseting.
3649 	 */
3650 
3651 	if (in->udcd_flags & UDCD_RESET) {
3652 		int flag = RESET_TARGET;
3653 		err = dcd_reset(ROUTE, flag) ? 0: EIO;
3654 		return (err);
3655 	}
3656 
3657 	scmd = in;
3658 
3659 
3660 	/* Do some sanity checks */
3661 	if (scmd->udcd_buflen <= 0) {
3662 		if (scmd->udcd_flags & (UDCD_READ | UDCD_WRITE)) {
3663 			return (EINVAL);
3664 		} else {
3665 			scmd->udcd_buflen = 0;
3666 		}
3667 	}
3668 
3669 	/* Make a copy of the dcd_cmd passed  */
3670 	cdb = kmem_zalloc(sizeof (struct dcd_cmd), KM_SLEEP);
3671 	if (cdbspace == UIO_SYSSPACE) {
3672 		flags |= FKIOCTL;
3673 	}
3674 
3675 	if (ddi_copyin((void *)scmd->udcd_cmd, cdb, sizeof (struct dcd_cmd),
3676 	    flags)) {
3677 		kmem_free(cdb, sizeof (struct dcd_cmd));
3678 		return (EFAULT);
3679 	}
3680 	scmd = (struct udcd_cmd *)kmem_alloc(sizeof (*scmd), KM_SLEEP);
3681 	bcopy((caddr_t)in, (caddr_t)scmd, sizeof (*scmd));
3682 	scmd->udcd_cmd = (struct dcd_cmd *)cdb;
3683 	rw = (scmd->udcd_flags & UDCD_READ) ? B_READ: B_WRITE;
3684 
3685 
3686 	/*
3687 	 * Get the special buffer
3688 	 */
3689 
3690 	mutex_enter(DCD_MUTEX);
3691 	while (un->un_sbuf_busy) {
3692 		if (cv_wait_sig(&un->un_sbuf_cv, DCD_MUTEX) == 0) {
3693 			kmem_free(scmd->udcd_cmd, sizeof (struct dcd_cmd));
3694 			kmem_free((caddr_t)scmd, sizeof (*scmd));
3695 			mutex_exit(DCD_MUTEX);
3696 			return (EINTR);
3697 		}
3698 	}
3699 
3700 	un->un_sbuf_busy = 1;
3701 	bp  = un->un_sbufp;
3702 	mutex_exit(DCD_MUTEX);
3703 
3704 
3705 	/*
3706 	 * If we are going to do actual I/O, let physio do all the
3707 	 * things
3708 	 */
3709 	DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
3710 	    "dcdioctl_cmd : buflen %x\n", scmd->udcd_buflen);
3711 
3712 	if (scmd->udcd_buflen) {
3713 		auto struct iovec aiov;
3714 		auto struct uio auio;
3715 		struct uio *uio = &auio;
3716 
3717 		bzero((caddr_t)&auio, sizeof (struct uio));
3718 		bzero((caddr_t)&aiov, sizeof (struct iovec));
3719 
3720 		aiov.iov_base = scmd->udcd_bufaddr;
3721 		aiov.iov_len = scmd->udcd_buflen;
3722 
3723 		uio->uio_iov = &aiov;
3724 		uio->uio_iovcnt = 1;
3725 		uio->uio_resid = scmd->udcd_buflen;
3726 		uio->uio_segflg = dataspace;
3727 
3728 		/*
3729 		 * Let physio do the rest...
3730 		 */
3731 		bp->av_back = NO_PKT_ALLOCATED;
3732 		bp->b_forw = (struct buf *)scmd;
3733 		err = physio(dcdstrategy, bp, devp, rw, dcdudcdmin, uio);
3734 	} else {
3735 		/*
3736 		 * We have to mimic what physio would do here.
3737 		 */
3738 		bp->av_back = NO_PKT_ALLOCATED;
3739 		bp->b_forw = (struct buf *)scmd;
3740 		bp->b_flags = B_BUSY | rw;
3741 		bp->b_edev = devp;
3742 		bp->b_dev = cmpdev(devp);
3743 		bp->b_bcount = bp->b_blkno = 0;
3744 		(void) dcdstrategy(bp);
3745 		err = biowait(bp);
3746 	}
3747 
3748 done:
3749 	if ((pkt = BP_PKT(bp)) != NULL) {
3750 		bp->av_back = NO_PKT_ALLOCATED;
3751 		/* we need to update the completion status of udcd command */
3752 		in->udcd_resid = bp->b_resid;
3753 		in->udcd_status_reg = SCBP_C(pkt);
3754 		/* XXX: we need to give error_reg also */
3755 		dcd_destroy_pkt(pkt);
3756 	}
3757 	/*
3758 	 * Tell anybody who cares that the buffer is now free
3759 	 */
3760 	mutex_enter(DCD_MUTEX);
3761 	un->un_sbuf_busy = 0;
3762 	cv_signal(&un->un_sbuf_cv);
3763 	mutex_exit(DCD_MUTEX);
3764 
3765 	kmem_free(scmd->udcd_cmd, sizeof (struct dcd_cmd));
3766 	kmem_free((caddr_t)scmd, sizeof (*scmd));
3767 	return (err);
3768 }
3769 
3770 static void
3771 dcdudcdmin(struct buf *bp)
3772 {
3773 
3774 #ifdef lint
3775 	bp = bp;
3776 #endif
3777 
3778 }
3779 
3780 /*
3781  * restart a cmd from timeout() context
3782  *
3783  * the cmd is expected to be in un_utab.b_forw. If this pointer is non-zero
3784  * a restart timeout request has been issued and no new timeouts should
3785  * be requested. b_forw is reset when the cmd eventually completes in
3786  * dcddone_and_mutex_exit()
3787  */
3788 void
3789 dcdrestart(void *arg)
3790 {
3791 	struct dcd_disk *un = (struct dcd_disk *)arg;
3792 	struct buf *bp;
3793 	int status;
3794 
3795 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdrestart\n");
3796 
3797 	mutex_enter(DCD_MUTEX);
3798 	bp = un->un_utab.b_forw;
3799 	if (bp) {
3800 		un->un_ncmds++;
3801 		DCD_DO_KSTATS(un, kstat_waitq_to_runq, bp);
3802 	}
3803 
3804 
3805 	if (bp) {
3806 		struct dcd_pkt *pkt = BP_PKT(bp);
3807 
3808 		mutex_exit(DCD_MUTEX);
3809 
3810 		pkt->pkt_flags = 0;
3811 
3812 		if ((status = dcd_transport(pkt)) != TRAN_ACCEPT) {
3813 			mutex_enter(DCD_MUTEX);
3814 			DCD_DO_KSTATS(un, kstat_runq_back_to_waitq, bp);
3815 			un->un_ncmds--;
3816 			if (status == TRAN_BUSY) {
3817 				/* XXX : To be checked */
3818 				/*
3819 				 * if (un->un_throttle > 1) {
3820 				 *	ASSERT(un->un_ncmds >= 0);
3821 				 *	un->un_throttle = un->un_ncmds;
3822 				 * }
3823 				 */
3824 				un->un_reissued_timeid =
3825 				timeout(dcdrestart, (caddr_t)un,
3826 				    DCD_BSY_TIMEOUT/500);
3827 				mutex_exit(DCD_MUTEX);
3828 				return;
3829 			}
3830 			DCD_DO_ERRSTATS(un, dcd_transerrs);
3831 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
3832 			    "dcdrestart transport failed (%x)\n", status);
3833 			bp->b_resid = bp->b_bcount;
3834 			SET_BP_ERROR(bp, EIO);
3835 
3836 			DCD_DO_KSTATS(un, kstat_waitq_exit, bp);
3837 			un->un_reissued_timeid = 0L;
3838 			dcddone_and_mutex_exit(un, bp);
3839 			return;
3840 		}
3841 		mutex_enter(DCD_MUTEX);
3842 	}
3843 	un->un_reissued_timeid = 0L;
3844 	mutex_exit(DCD_MUTEX);
3845 	DAD_DEBUG(DCD_DEVINFO, dcd_label, DCD_DEBUG, "dcdrestart done\n");
3846 }
3847 
3848 /*
3849  * This routine gets called to reset the throttle to its saved
3850  * value wheneven we lower the throttle.
3851  */
3852 void
3853 dcd_reset_throttle(caddr_t arg)
3854 {
3855 	struct dcd_disk *un = (struct dcd_disk *)arg;
3856 	struct diskhd *dp;
3857 
3858 	mutex_enter(DCD_MUTEX);
3859 	dp = &un->un_utab;
3860 
3861 	/*
3862 	 * start any commands that didn't start while throttling.
3863 	 */
3864 	if (dp->b_actf && (un->un_ncmds < un->un_throttle) &&
3865 	    (dp->b_forw == NULL)) {
3866 		dcdstart(un);
3867 	}
3868 	mutex_exit(DCD_MUTEX);
3869 }
3870 
3871 
3872 /*
3873  * This routine handles the case when a TRAN_BUSY is
3874  * returned by HBA.
3875  *
3876  * If there are some commands already in the transport, the
3877  * bp can be put back on queue and it will
3878  * be retried when the queue is emptied after command
3879  * completes. But if there is no command in the tranport
3880  * and it still return busy, we have to retry the command
3881  * after some time like 10ms.
3882  */
3883 /* ARGSUSED0 */
3884 static void
3885 dcd_handle_tran_busy(struct buf *bp, struct diskhd *dp, struct dcd_disk *un)
3886 {
3887 	ASSERT(mutex_owned(DCD_MUTEX));
3888 
3889 
3890 	if (dp->b_forw == NULL || dp->b_forw == bp) {
3891 		dp->b_forw = bp;
3892 	} else if (dp->b_forw != bp) {
3893 		bp->b_actf = dp->b_actf;
3894 		dp->b_actf = bp;
3895 
3896 	}
3897 	if (!un->un_reissued_timeid) {
3898 		un->un_reissued_timeid =
3899 			timeout(dcdrestart, (caddr_t)un, DCD_BSY_TIMEOUT/500);
3900 	}
3901 }
3902 
3903 static int
3904 dcd_write_deviceid(struct dcd_disk *un)
3905 {
3906 
3907 	int 	status;
3908 	diskaddr_t blk;
3909 	struct udcd_cmd ucmd;
3910 	struct dcd_cmd cdb;
3911 	struct dk_devid	*dkdevid;
3912 	uint_t *ip, chksum;
3913 	int	i;
3914 	dev_t	dev;
3915 
3916 	mutex_exit(DCD_MUTEX);
3917 	if (cmlb_get_devid_block(un->un_dklbhandle, &blk, 0)) {
3918 		mutex_enter(DCD_MUTEX);
3919 		return (EINVAL);
3920 	}
3921 	mutex_enter(DCD_MUTEX);
3922 
3923 	/* Allocate the buffer */
3924 	dkdevid = kmem_zalloc(un->un_secsize, KM_SLEEP);
3925 
3926 	/* Fill in the revision */
3927 	dkdevid->dkd_rev_hi = DK_DEVID_REV_MSB;
3928 	dkdevid->dkd_rev_lo = DK_DEVID_REV_LSB;
3929 
3930 	/* Copy in the device id */
3931 	bcopy(un->un_devid, &dkdevid->dkd_devid,
3932 	    ddi_devid_sizeof(un->un_devid));
3933 
3934 	/* Calculate the chksum */
3935 	chksum = 0;
3936 	ip = (uint_t *)dkdevid;
3937 	for (i = 0; i < ((un->un_secsize - sizeof (int))/sizeof (int)); i++)
3938 		chksum ^= ip[i];
3939 
3940 	/* Fill in the checksum */
3941 	DKD_FORMCHKSUM(chksum, dkdevid);
3942 
3943 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
3944 	(void) bzero((caddr_t)&cdb, sizeof (struct dcd_cmd));
3945 
3946 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
3947 		cdb.cmd = ATA_WRITE_DMA;
3948 	} else {
3949 		if (un->un_dp->options & BLOCK_MODE)
3950 			cdb.cmd = ATA_WRITE_MULTIPLE;
3951 		else
3952 			cdb.cmd = ATA_WRITE;
3953 	}
3954 	cdb.size = un->un_secsize;
3955 	cdb.sector_num.lba_num = blk;
3956 	cdb.address_mode = ADD_LBA_MODE;
3957 	cdb.direction = DATA_WRITE;
3958 
3959 	ucmd.udcd_flags = UDCD_WRITE;
3960 	ucmd.udcd_cmd =  &cdb;
3961 	ucmd.udcd_bufaddr = (caddr_t)dkdevid;
3962 	ucmd.udcd_buflen = un->un_secsize;
3963 	ucmd.udcd_flags |= UDCD_SILENT;
3964 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
3965 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
3966 	mutex_exit(DCD_MUTEX);
3967 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
3968 	mutex_enter(DCD_MUTEX);
3969 
3970 	kmem_free(dkdevid, un->un_secsize);
3971 	return (status);
3972 }
3973 
3974 static int
3975 dcd_read_deviceid(struct dcd_disk *un)
3976 {
3977 	int status;
3978 	diskaddr_t blk;
3979 	struct udcd_cmd ucmd;
3980 	struct dcd_cmd cdb;
3981 	struct dk_devid *dkdevid;
3982 	uint_t *ip;
3983 	int chksum;
3984 	int i, sz;
3985 	dev_t dev;
3986 
3987 	mutex_exit(DCD_MUTEX);
3988 	if (cmlb_get_devid_block(un->un_dklbhandle, &blk, 0)) {
3989 		mutex_enter(DCD_MUTEX);
3990 		return (EINVAL);
3991 	}
3992 	mutex_enter(DCD_MUTEX);
3993 
3994 	dkdevid = kmem_alloc(un->un_secsize, KM_SLEEP);
3995 
3996 	(void) bzero((caddr_t)&ucmd, sizeof (ucmd));
3997 	(void) bzero((caddr_t)&cdb, sizeof (cdb));
3998 
3999 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
4000 		cdb.cmd = ATA_READ_DMA;
4001 	} else {
4002 		if (un->un_dp->options & BLOCK_MODE)
4003 			cdb.cmd = ATA_READ_MULTIPLE;
4004 		else
4005 			cdb.cmd = ATA_READ;
4006 	}
4007 	cdb.size = un->un_secsize;
4008 	cdb.sector_num.lba_num = blk;
4009 	cdb.address_mode = ADD_LBA_MODE;
4010 	cdb.direction = DATA_READ;
4011 
4012 	ucmd.udcd_flags = UDCD_READ;
4013 	ucmd.udcd_cmd =  &cdb;
4014 	ucmd.udcd_bufaddr = (caddr_t)dkdevid;
4015 	ucmd.udcd_buflen = un->un_secsize;
4016 	ucmd.udcd_flags |= UDCD_SILENT;
4017 	dev = makedevice(ddi_driver_major(DCD_DEVINFO),
4018 	    ddi_get_instance(DCD_DEVINFO) << DCDUNIT_SHIFT);
4019 	mutex_exit(DCD_MUTEX);
4020 	status = dcdioctl_cmd(dev, &ucmd, UIO_SYSSPACE, UIO_SYSSPACE);
4021 	mutex_enter(DCD_MUTEX);
4022 
4023 	if (status != 0) {
4024 		kmem_free((caddr_t)dkdevid, un->un_secsize);
4025 		return (status);
4026 	}
4027 
4028 	/* Validate the revision */
4029 
4030 	if ((dkdevid->dkd_rev_hi != DK_DEVID_REV_MSB) ||
4031 	    (dkdevid->dkd_rev_lo != DK_DEVID_REV_LSB)) {
4032 		kmem_free((caddr_t)dkdevid, un->un_secsize);
4033 		return (EINVAL);
4034 	}
4035 
4036 	/* Calculate the checksum */
4037 	chksum = 0;
4038 	ip = (uint_t *)dkdevid;
4039 	for (i = 0; i < ((un->un_secsize - sizeof (int))/sizeof (int)); i++)
4040 		chksum ^= ip[i];
4041 
4042 	/* Compare the checksums */
4043 
4044 	if (DKD_GETCHKSUM(dkdevid) != chksum) {
4045 		kmem_free((caddr_t)dkdevid, un->un_secsize);
4046 		return (EINVAL);
4047 	}
4048 
4049 	/* VAlidate the device id */
4050 	if (ddi_devid_valid((ddi_devid_t)&dkdevid->dkd_devid) != DDI_SUCCESS) {
4051 		kmem_free((caddr_t)dkdevid, un->un_secsize);
4052 		return (EINVAL);
4053 	}
4054 
4055 	/* return a copy of the device id */
4056 	sz = ddi_devid_sizeof((ddi_devid_t)&dkdevid->dkd_devid);
4057 	un->un_devid = (ddi_devid_t)kmem_alloc(sz, KM_SLEEP);
4058 	bcopy(&dkdevid->dkd_devid, un->un_devid, sz);
4059 	kmem_free((caddr_t)dkdevid, un->un_secsize);
4060 
4061 	return (0);
4062 }
4063 
4064 /*
4065  * Return the device id for the device.
4066  * 1. If the device ID exists then just return it - nothing to do in that case.
4067  * 2. Build one from the drives model number and serial number.
4068  * 3. If there is a problem in building it from serial/model #, then try
4069  * to read it from the acyl region of the disk.
4070  * Note: If this function is unable to return a valid ID then the calling
4071  * point will invoke the routine to create a fabricated ID ans stor it on the
4072  * acyl region of the disk.
4073  */
4074 static ddi_devid_t
4075 dcd_get_devid(struct dcd_disk *un)
4076 {
4077 	int		rc;
4078 
4079 	/* If already registered, return that value */
4080 	if (un->un_devid != NULL)
4081 		return (un->un_devid);
4082 
4083 	/* Build a devid from model and serial number, if present */
4084 	rc = dcd_make_devid_from_serial(un);
4085 
4086 	if (rc != DDI_SUCCESS) {
4087 		/* Read the devid from the disk. */
4088 		if (dcd_read_deviceid(un))
4089 			return (NULL);
4090 	}
4091 
4092 	(void) ddi_devid_register(DCD_DEVINFO, un->un_devid);
4093 	return (un->un_devid);
4094 }
4095 
4096 
4097 static ddi_devid_t
4098 dcd_create_devid(struct dcd_disk *un)
4099 {
4100 	if (ddi_devid_init(DCD_DEVINFO, DEVID_FAB, 0, NULL, (ddi_devid_t *)
4101 	    &un->un_devid) == DDI_FAILURE)
4102 		return (NULL);
4103 
4104 	if (dcd_write_deviceid(un)) {
4105 		ddi_devid_free(un->un_devid);
4106 		un->un_devid = NULL;
4107 		return (NULL);
4108 	}
4109 
4110 	(void) ddi_devid_register(DCD_DEVINFO, un->un_devid);
4111 	return (un->un_devid);
4112 }
4113 
4114 /*
4115  * Build a devid from the model and serial number, if present
4116  * Return DDI_SUCCESS or DDI_FAILURE.
4117  */
4118 static int
4119 dcd_make_devid_from_serial(struct dcd_disk *un)
4120 {
4121 	int	rc = DDI_SUCCESS;
4122 	char	*hwid;
4123 	char	*model;
4124 	int	model_len;
4125 	char	*serno;
4126 	int	serno_len;
4127 	int	total_len;
4128 
4129 	/* initialize the model and serial number information */
4130 	model = un->un_dcd->dcd_ident->dcd_model;
4131 	model_len = DCD_MODEL_NUMBER_LENGTH;
4132 	serno = un->un_dcd->dcd_ident->dcd_drvser;
4133 	serno_len = DCD_SERIAL_NUMBER_LENGTH;
4134 
4135 	/* Verify the model and serial number */
4136 	dcd_validate_model_serial(model, &model_len, model_len);
4137 	if (model_len == 0) {
4138 		rc = DDI_FAILURE;
4139 		goto out;
4140 	}
4141 	dcd_validate_model_serial(serno, &serno_len, serno_len);
4142 	if (serno_len == 0) {
4143 		rc = DDI_FAILURE;
4144 		goto out;
4145 	}
4146 
4147 	/*
4148 	 * The device ID will be concatenation of the model number,
4149 	 * the '=' separator, the serial number. Allocate
4150 	 * the string and concatenate the components.
4151 	 */
4152 	total_len = model_len + 1 + serno_len;
4153 	hwid = kmem_alloc(total_len, KM_SLEEP);
4154 	bcopy((caddr_t)model, (caddr_t)hwid, model_len);
4155 	bcopy((caddr_t)"=", (caddr_t)&hwid[model_len], 1);
4156 	bcopy((caddr_t)serno, (caddr_t)&hwid[model_len + 1], serno_len);
4157 
4158 	/* Initialize the device ID, trailing NULL not included */
4159 	rc = ddi_devid_init(DCD_DEVINFO, DEVID_ATA_SERIAL, total_len,
4160 	    hwid, (ddi_devid_t *)&un->un_devid);
4161 
4162 	/* Free the allocated string */
4163 	kmem_free(hwid, total_len);
4164 
4165 out:	return (rc);
4166 }
4167 
4168 /*
4169  * Test for a valid model or serial number. Assume that a valid representation
4170  * contains at least one character that is neither a space, 0 digit, or NULL.
4171  * Trim trailing blanks and NULLS from returned length.
4172  */
4173 static void
4174 dcd_validate_model_serial(char *str, int *retlen, int totallen)
4175 {
4176 	char		ch;
4177 	boolean_t	ret = B_FALSE;
4178 	int		i;
4179 	int		tb;
4180 
4181 	for (i = 0, tb = 0; i < totallen; i++) {
4182 		ch = *str++;
4183 		if ((ch != ' ') && (ch != '\0') && (ch != '0'))
4184 			ret = B_TRUE;
4185 		if ((ch == ' ') || (ch == '\0'))
4186 			tb++;
4187 		else
4188 			tb = 0;
4189 	}
4190 
4191 	if (ret == B_TRUE) {
4192 		/* Atleast one non 0 or blank character. */
4193 		*retlen = totallen - tb;
4194 	} else {
4195 		*retlen = 0;
4196 	}
4197 }
4198 
4199 #ifndef lint
4200 void
4201 clean_print(dev_info_t *dev, char *label, uint_t level,
4202 	char *title, char *data, int len)
4203 {
4204 	int	i;
4205 	char	buf[256];
4206 
4207 	(void) sprintf(buf, "%s:", title);
4208 	for (i = 0; i < len; i++) {
4209 		(void) sprintf(&buf[strlen(buf)], "0x%x ", (data[i] & 0xff));
4210 	}
4211 	(void) sprintf(&buf[strlen(buf)], "\n");
4212 
4213 	dcd_log(dev, label, level, "%s", buf);
4214 }
4215 #endif /* Not lint */
4216 
4217 #ifndef lint
4218 /*
4219  * Print a piece of inquiry data- cleaned up for non-printable characters
4220  * and stopping at the first space character after the beginning of the
4221  * passed string;
4222  */
4223 
4224 void
4225 inq_fill(char *p, int l, char *s)
4226 {
4227 	unsigned i = 0;
4228 	char c;
4229 
4230 	while (i++ < l) {
4231 		if ((c = *p++) < ' ' || c >= 0177) {
4232 			c = '*';
4233 		} else if (i != 1 && c == ' ') {
4234 			break;
4235 		}
4236 		*s++ = c;
4237 	}
4238 	*s++ = 0;
4239 }
4240 #endif /* Not lint */
4241 
4242 char *
4243 dcd_sname(uchar_t status)
4244 {
4245 	switch (status & STATUS_ATA_MASK) {
4246 	case STATUS_GOOD:
4247 		return ("good status");
4248 
4249 	case STATUS_ATA_BUSY:
4250 		return ("busy");
4251 
4252 	default:
4253 		return ("<unknown status>");
4254 	}
4255 }
4256 
4257 /* ARGSUSED0 */
4258 char *
4259 dcd_rname(int reason)
4260 {
4261 	static char *rnames[] = {
4262 		"cmplt",
4263 		"incomplete",
4264 		"dma_derr",
4265 		"tran_err",
4266 		"reset",
4267 		"aborted",
4268 		"timeout",
4269 		"data_ovr",
4270 	};
4271 	if (reason > CMD_DATA_OVR) {
4272 		return ("<unknown reason>");
4273 	} else {
4274 		return (rnames[reason]);
4275 	}
4276 }
4277 
4278 
4279 
4280 /* ARGSUSED0 */
4281 int
4282 dcd_check_wp(dev_t dev)
4283 {
4284 
4285 	return (0);
4286 }
4287 
4288 /*
4289  * Create device error kstats
4290  */
4291 static int
4292 dcd_create_errstats(struct dcd_disk *un, int instance)
4293 {
4294 
4295 	char kstatname[KSTAT_STRLEN];
4296 
4297 	if (un->un_errstats == (kstat_t *)0) {
4298 		(void) sprintf(kstatname, "dad%d,error", instance);
4299 		un->un_errstats = kstat_create("daderror", instance, kstatname,
4300 		    "device_error", KSTAT_TYPE_NAMED,
4301 		    sizeof (struct dcd_errstats)/ sizeof (kstat_named_t),
4302 		    KSTAT_FLAG_PERSISTENT);
4303 
4304 		if (un->un_errstats) {
4305 			struct dcd_errstats *dtp;
4306 
4307 			dtp = (struct dcd_errstats *)un->un_errstats->ks_data;
4308 			kstat_named_init(&dtp->dcd_softerrs, "Soft Errors",
4309 			    KSTAT_DATA_UINT32);
4310 			kstat_named_init(&dtp->dcd_harderrs, "Hard Errors",
4311 			    KSTAT_DATA_UINT32);
4312 			kstat_named_init(&dtp->dcd_transerrs,
4313 			    "Transport Errors", KSTAT_DATA_UINT32);
4314 			kstat_named_init(&dtp->dcd_model, "Model",
4315 			    KSTAT_DATA_CHAR);
4316 			kstat_named_init(&dtp->dcd_revision, "Revision",
4317 			    KSTAT_DATA_CHAR);
4318 			kstat_named_init(&dtp->dcd_serial, "Serial No",
4319 			    KSTAT_DATA_CHAR);
4320 			kstat_named_init(&dtp->dcd_capacity, "Size",
4321 			    KSTAT_DATA_ULONGLONG);
4322 			kstat_named_init(&dtp->dcd_rq_media_err, "Media Error",
4323 			    KSTAT_DATA_UINT32);
4324 			kstat_named_init(&dtp->dcd_rq_ntrdy_err,
4325 			    "Device Not Ready", KSTAT_DATA_UINT32);
4326 			kstat_named_init(&dtp->dcd_rq_nodev_err, " No Device",
4327 			    KSTAT_DATA_UINT32);
4328 			kstat_named_init(&dtp->dcd_rq_recov_err, "Recoverable",
4329 			    KSTAT_DATA_UINT32);
4330 			kstat_named_init(&dtp->dcd_rq_illrq_err,
4331 			    "Illegal Request", KSTAT_DATA_UINT32);
4332 
4333 			un->un_errstats->ks_private = un;
4334 			un->un_errstats->ks_update = nulldev;
4335 			kstat_install(un->un_errstats);
4336 
4337 			(void) strncpy(&dtp->dcd_model.value.c[0],
4338 			    un->un_dcd->dcd_ident->dcd_model, 16);
4339 			(void) strncpy(&dtp->dcd_serial.value.c[0],
4340 			    un->un_dcd->dcd_ident->dcd_drvser, 16);
4341 			(void) strncpy(&dtp->dcd_revision.value.c[0],
4342 			    un->un_dcd->dcd_ident->dcd_fw, 8);
4343 			dtp->dcd_capacity.value.ui64 =
4344 			    (uint64_t)((uint64_t)un->un_diskcapacity *
4345 			    (uint64_t)un->un_lbasize);
4346 		}
4347 	}
4348 	return (0);
4349 }
4350 
4351 
4352 /*
4353  * This has been moved from DADA layer as this does not do anything other than
4354  * retrying the command when it is busy or it does not complete
4355  */
4356 int
4357 dcd_poll(struct dcd_pkt *pkt)
4358 {
4359 	int	busy_count, rval = -1, savef;
4360 	clock_t	savet;
4361 	void	(*savec)();
4362 
4363 
4364 	/*
4365 	 * Save old flags
4366 	 */
4367 	savef = pkt->pkt_flags;
4368 	savec = pkt->pkt_comp;
4369 	savet = pkt->pkt_time;
4370 
4371 	pkt->pkt_flags |= FLAG_NOINTR;
4372 
4373 
4374 	/*
4375 	 * Set the Pkt_comp to NULL
4376 	 */
4377 
4378 	pkt->pkt_comp = 0;
4379 
4380 	/*
4381 	 * Set the Pkt time for the polled command
4382 	 */
4383 	if (pkt->pkt_time == 0) {
4384 		pkt->pkt_time = DCD_POLL_TIMEOUT;
4385 	}
4386 
4387 
4388 	/* Now transport the command */
4389 	for (busy_count = 0; busy_count < dcd_poll_busycnt; busy_count++) {
4390 		if ((rval = dcd_transport(pkt)) == TRAN_ACCEPT) {
4391 			if (pkt->pkt_reason == CMD_INCOMPLETE &&
4392 			    pkt->pkt_state == 0) {
4393 				delay(100);
4394 			} else if (pkt->pkt_reason  == CMD_CMPLT) {
4395 				rval = 0;
4396 				break;
4397 			}
4398 		}
4399 		if (rval == TRAN_BUSY)  {
4400 			delay(100);
4401 			continue;
4402 		}
4403 	}
4404 
4405 	pkt->pkt_flags = savef;
4406 	pkt->pkt_comp = savec;
4407 	pkt->pkt_time = savet;
4408 	return (rval);
4409 }
4410 
4411 
4412 void
4413 dcd_translate(struct dadkio_status32 *statp, struct udcd_cmd *cmdp)
4414 {
4415 	if (cmdp->udcd_status_reg & STATUS_ATA_BUSY)
4416 		statp->status = DADKIO_STAT_NOT_READY;
4417 	else if (cmdp->udcd_status_reg & STATUS_ATA_DWF)
4418 		statp->status = DADKIO_STAT_HARDWARE_ERROR;
4419 	else if (cmdp->udcd_status_reg & STATUS_ATA_CORR)
4420 		statp->status = DADKIO_STAT_SOFT_ERROR;
4421 	else if (cmdp->udcd_status_reg & STATUS_ATA_ERR) {
4422 		/*
4423 		 * The error register is valid only when BSY and DRQ not set
4424 		 * Assumed that HBA has checked this before it gives the data
4425 		 */
4426 		if (cmdp->udcd_error_reg & ERR_AMNF)
4427 			statp->status = DADKIO_STAT_NOT_FORMATTED;
4428 		else if (cmdp->udcd_error_reg & ERR_TKONF)
4429 			statp->status = DADKIO_STAT_NOT_FORMATTED;
4430 		else if (cmdp->udcd_error_reg & ERR_ABORT)
4431 			statp->status = DADKIO_STAT_ILLEGAL_REQUEST;
4432 		else if (cmdp->udcd_error_reg & ERR_IDNF)
4433 			statp->status = DADKIO_STAT_NOT_FORMATTED;
4434 		else if (cmdp->udcd_error_reg & ERR_UNC)
4435 			statp->status = DADKIO_STAT_BUS_ERROR;
4436 		else if (cmdp->udcd_error_reg & ERR_BBK)
4437 			statp->status = DADKIO_STAT_MEDIUM_ERROR;
4438 	} else
4439 		statp->status = DADKIO_STAT_NO_ERROR;
4440 }
4441 
4442 static void
4443 dcd_flush_cache(struct dcd_disk *un)
4444 {
4445 	struct dcd_pkt *pkt;
4446 	int retry_count;
4447 
4448 
4449 	if ((pkt = dcd_init_pkt(ROUTE, NULL, NULL,
4450 	    (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
4451 	    PKT_CONSISTENT, NULL_FUNC, NULL)) == NULL) {
4452 		return;
4453 	}
4454 
4455 	makecommand(pkt, 0, ATA_FLUSH_CACHE, 0, ADD_LBA_MODE, 0,
4456 	    NO_DATA_XFER, 0);
4457 
4458 	/*
4459 	 * Send the command. There are chances it might fail on some
4460 	 * disks since it is not a mandatory command as per ata-4. Try
4461 	 * 3 times if it fails. The retry count has been randomly selected.
4462 	 * There is a need for retry since as per the spec FLUSH CACHE can fail
4463 	 * as a result of unrecoverable error encountered during execution
4464 	 * of writing data and subsequent command should continue flushing
4465 	 * cache.
4466 	 */
4467 	for (retry_count = 0; retry_count < 3; retry_count++) {
4468 		/*
4469 		 * Set the packet fields.
4470 		 */
4471 		pkt->pkt_comp = 0;
4472 		pkt->pkt_time = DCD_POLL_TIMEOUT;
4473 		pkt->pkt_flags |= FLAG_FORCENOINTR;
4474 		pkt->pkt_flags |= FLAG_NOINTR;
4475 		if (dcd_transport(pkt) == TRAN_ACCEPT) {
4476 			if (pkt->pkt_reason  == CMD_CMPLT) {
4477 				break;
4478 			}
4479 		}
4480 		/*
4481 		 * Note the wait time value of 100ms is same as in the
4482 		 * dcd_poll routine.
4483 		 */
4484 		drv_usecwait(1000000);
4485 	}
4486 	(void) dcd_destroy_pkt(pkt);
4487 }
4488 
4489 static int
4490 dcd_send_lb_rw_cmd(dev_info_t *devi, void *bufaddr,
4491     diskaddr_t start_block, size_t reqlength, uchar_t cmd)
4492 {
4493 	struct dcd_pkt *pkt;
4494 	struct buf *bp;
4495 	diskaddr_t real_addr = start_block;
4496 	size_t buffer_size = reqlength;
4497 	uchar_t command, tmp;
4498 	int i, rval = 0;
4499 	struct dcd_disk *un;
4500 
4501 	un = ddi_get_soft_state(dcd_state, ddi_get_instance(devi));
4502 	if (un == NULL)
4503 		return (ENXIO);
4504 
4505 	bp = dcd_alloc_consistent_buf(ROUTE, (struct buf *)NULL,
4506 	    buffer_size, B_READ, NULL_FUNC, NULL);
4507 	if (!bp) {
4508 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
4509 		    "no bp for disk label\n");
4510 		return (ENOMEM);
4511 	}
4512 
4513 	pkt = dcd_init_pkt(ROUTE, (struct dcd_pkt *)NULL,
4514 	    bp, (uint32_t)sizeof (struct dcd_cmd), 2, PP_LEN,
4515 	    PKT_CONSISTENT, NULL_FUNC, NULL);
4516 
4517 	if (!pkt) {
4518 		dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
4519 		    "no memory for disk label\n");
4520 		dcd_free_consistent_buf(bp);
4521 		return (ENOMEM);
4522 	}
4523 
4524 	if (cmd == TG_READ) {
4525 		bzero(bp->b_un.b_addr, buffer_size);
4526 		tmp = DATA_READ;
4527 	} else {
4528 		bcopy((caddr_t)bufaddr, bp->b_un.b_addr, buffer_size);
4529 		tmp = DATA_WRITE;
4530 	}
4531 
4532 	mutex_enter(DCD_MUTEX);
4533 	if ((un->un_dp->options & DMA_SUPPORTTED) == DMA_SUPPORTTED) {
4534 		if (cmd == TG_READ) {
4535 			command = ATA_READ_DMA;
4536 		} else {
4537 			command = ATA_WRITE_DMA;
4538 		}
4539 	} else {
4540 		if (cmd == TG_READ) {
4541 			if (un->un_dp->options & BLOCK_MODE)
4542 				command = ATA_READ_MULTIPLE;
4543 			else
4544 				command = ATA_READ;
4545 		} else {
4546 			if (un->un_dp->options & BLOCK_MODE)
4547 				command = ATA_READ_MULTIPLE;
4548 			else
4549 				command = ATA_WRITE;
4550 		}
4551 	}
4552 	mutex_exit(DCD_MUTEX);
4553 	(void) makecommand(pkt, 0, command, real_addr, ADD_LBA_MODE,
4554 	    buffer_size, tmp, 0);
4555 
4556 	for (i = 0; i < 3; i++) {
4557 		if (dcd_poll(pkt) || SCBP_C(pkt) != STATUS_GOOD ||
4558 		    (pkt->pkt_state & STATE_XFERRED_DATA) == 0 ||
4559 		    (pkt->pkt_resid != 0)) {
4560 			DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
4561 			    "Status %x, state %x, resid %lx\n",
4562 			    SCBP_C(pkt), pkt->pkt_state, pkt->pkt_resid);
4563 			rval = EIO;
4564 		} else {
4565 			break;
4566 		}
4567 	}
4568 
4569 	if (rval != 0) {
4570 		dcd_destroy_pkt(pkt);
4571 		dcd_free_consistent_buf(bp);
4572 		return (EIO);
4573 	}
4574 
4575 	if (cmd == TG_READ) {
4576 		bcopy(bp->b_un.b_addr, bufaddr, reqlength);
4577 		rval = 0;
4578 	}
4579 
4580 	dcd_destroy_pkt(pkt);
4581 	dcd_free_consistent_buf(bp);
4582 	return (rval);
4583 }
4584 
4585 static int dcd_compute_dk_capacity(struct dcd_device *devp,
4586     diskaddr_t *capacity)
4587 {
4588 	diskaddr_t cap;
4589 	diskaddr_t no_of_lbasec;
4590 
4591 	cap = devp->dcd_ident->dcd_fixcyls *
4592 	    devp->dcd_ident->dcd_heads *
4593 	    devp->dcd_ident->dcd_sectors;
4594 	no_of_lbasec = devp->dcd_ident->dcd_addrsec[1];
4595 	no_of_lbasec = no_of_lbasec << 16;
4596 	no_of_lbasec = no_of_lbasec | devp->dcd_ident->dcd_addrsec[0];
4597 
4598 	if (no_of_lbasec > cap) {
4599 		cap = no_of_lbasec;
4600 	}
4601 
4602 	if (cap != ((uint32_t)-1))
4603 		*capacity = cap;
4604 	else
4605 		return (EINVAL);
4606 	return (0);
4607 }
4608 
4609 /*ARGSUSED5*/
4610 static int
4611 dcd_lb_rdwr(dev_info_t *devi, uchar_t cmd, void *bufaddr,
4612     diskaddr_t start_block, size_t reqlength, void *tg_cookie)
4613 {
4614 	if (cmd != TG_READ && cmd != TG_WRITE)
4615 		return (EINVAL);
4616 
4617 	return (dcd_send_lb_rw_cmd(devi, bufaddr, start_block,
4618 	    reqlength, cmd));
4619 }
4620 
4621 static int
4622 dcd_lb_getphygeom(dev_info_t *devi, cmlb_geom_t *phygeomp)
4623 {
4624 	struct dcd_device *devp;
4625 	uint32_t no_of_lbasec, capacity, calculated_cylinders;
4626 
4627 	devp = ddi_get_driver_private(devi);
4628 
4629 	if ((devp->dcd_ident->dcd_config & ATAPI_DEVICE) == 0) {
4630 		if (devp->dcd_ident->dcd_config & ATANON_REMOVABLE) {
4631 			phygeomp->g_ncyl = devp->dcd_ident->dcd_fixcyls - 2;
4632 			phygeomp->g_acyl = 2;
4633 			phygeomp->g_nhead = devp->dcd_ident->dcd_heads;
4634 			phygeomp->g_nsect = devp->dcd_ident->dcd_sectors;
4635 
4636 			no_of_lbasec = devp->dcd_ident->dcd_addrsec[1];
4637 			no_of_lbasec = no_of_lbasec << 16;
4638 			no_of_lbasec = no_of_lbasec |
4639 			    devp->dcd_ident->dcd_addrsec[0];
4640 			capacity = devp->dcd_ident->dcd_fixcyls *
4641 			    devp->dcd_ident->dcd_heads *
4642 			    devp->dcd_ident->dcd_sectors;
4643 			if (no_of_lbasec > capacity) {
4644 				capacity = no_of_lbasec;
4645 				if (capacity > NUM_SECTORS_32G) {
4646 					/*
4647 					 * if the capacity is greater than 32G,
4648 					 * then 255 is the sectors per track.
4649 					 * This should be good until 128G disk
4650 					 * capacity, which is the current ATA-4
4651 					 * limitation.
4652 					 */
4653 					phygeomp->g_nsect = 255;
4654 				}
4655 
4656 				/*
4657 				 * If the disk capacity is >= 128GB then no. of
4658 				 * addressable sectors will be set to 0xfffffff
4659 				 * in the IDENTIFY info. In that case set the
4660 				 *  no. of pcyl to the Max. 16bit value.
4661 				 */
4662 
4663 				calculated_cylinders = (capacity) /
4664 				    (phygeomp->g_nhead * phygeomp->g_nsect);
4665 				if (calculated_cylinders >= USHRT_MAX) {
4666 					phygeomp->g_ncyl = USHRT_MAX - 2;
4667 				} else {
4668 					phygeomp->g_ncyl =
4669 					    calculated_cylinders - 2;
4670 				}
4671 			}
4672 
4673 			phygeomp->g_capacity = capacity;
4674 			phygeomp->g_intrlv = 0;
4675 			phygeomp->g_rpm = 5400;
4676 			phygeomp->g_secsize = devp->dcd_ident->dcd_secsiz;
4677 
4678 			return (0);
4679 		} else
4680 			return (ENOTSUP);
4681 	} else {
4682 		return (EINVAL);
4683 	}
4684 }
4685 
4686 
4687 /*ARGSUSED3*/
4688 static int
4689 dcd_lb_getinfo(dev_info_t *devi, int cmd,  void *arg, void *tg_cookie)
4690 {
4691 	struct dcd_disk *un;
4692 
4693 	un = ddi_get_soft_state(dcd_state, ddi_get_instance(devi));
4694 
4695 	if (un == NULL)
4696 		return (ENXIO);
4697 
4698 	switch (cmd) {
4699 	case TG_GETPHYGEOM:
4700 		return (dcd_lb_getphygeom(devi, (cmlb_geom_t *)arg));
4701 
4702 	case TG_GETVIRTGEOM:
4703 		return (-1);
4704 
4705 	case TG_GETCAPACITY:
4706 	case TG_GETBLOCKSIZE:
4707 		mutex_enter(DCD_MUTEX);
4708 		if (un->un_diskcapacity <= 0) {
4709 			mutex_exit(DCD_MUTEX);
4710 			dcd_log(DCD_DEVINFO, dcd_label, CE_WARN,
4711 				"invalid disk capacity\n");
4712 			return (EIO);
4713 		}
4714 		if (cmd == TG_GETCAPACITY)
4715 			*(diskaddr_t *)arg = un->un_diskcapacity;
4716 		else
4717 			*(uint32_t *)arg = DEV_BSIZE;
4718 
4719 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG, "capacity %x\n",
4720 		    un->un_diskcapacity);
4721 		mutex_exit(DCD_MUTEX);
4722 		return (0);
4723 
4724 	case TG_GETATTR:
4725 		mutex_enter(DCD_MUTEX);
4726 		*(tg_attribute_t *)arg = un->un_tgattribute;
4727 		DAD_DEBUG2(DCD_DEVINFO, dcd_label, DCD_DEBUG,
4728 		    "media_is_writable %x\n",
4729 		    un->un_tgattribute.media_is_writable);
4730 		mutex_exit(DCD_MUTEX);
4731 		return (0);
4732 	default:
4733 		return (ENOTTY);
4734 	}
4735 }
4736