1 /****************************************************************************** 2 * 3 * Name: actbl2.h - ACPI Specification Revision 2.0 Tables 4 * $Revision: 1.45 $ 5 * 6 *****************************************************************************/ 7 8 /****************************************************************************** 9 * 10 * 1. Copyright Notice 11 * 12 * Some or all of this work - Copyright (c) 1999 - 2005, Intel Corp. 13 * All rights reserved. 14 * 15 * 2. License 16 * 17 * 2.1. This is your license from Intel Corp. under its intellectual property 18 * rights. You may have additional license terms from the party that provided 19 * you this software, covering your right to use that party's intellectual 20 * property rights. 21 * 22 * 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a 23 * copy of the source code appearing in this file ("Covered Code") an 24 * irrevocable, perpetual, worldwide license under Intel's copyrights in the 25 * base code distributed originally by Intel ("Original Intel Code") to copy, 26 * make derivatives, distribute, use and display any portion of the Covered 27 * Code in any form, with the right to sublicense such rights; and 28 * 29 * 2.3. Intel grants Licensee a non-exclusive and non-transferable patent 30 * license (with the right to sublicense), under only those claims of Intel 31 * patents that are infringed by the Original Intel Code, to make, use, sell, 32 * offer to sell, and import the Covered Code and derivative works thereof 33 * solely to the minimum extent necessary to exercise the above copyright 34 * license, and in no event shall the patent license extend to any additions 35 * to or modifications of the Original Intel Code. No other license or right 36 * is granted directly or by implication, estoppel or otherwise; 37 * 38 * The above copyright and patent license is granted only if the following 39 * conditions are met: 40 * 41 * 3. Conditions 42 * 43 * 3.1. Redistribution of Source with Rights to Further Distribute Source. 44 * Redistribution of source code of any substantial portion of the Covered 45 * Code or modification with rights to further distribute source must include 46 * the above Copyright Notice, the above License, this list of Conditions, 47 * and the following Disclaimer and Export Compliance provision. In addition, 48 * Licensee must cause all Covered Code to which Licensee contributes to 49 * contain a file documenting the changes Licensee made to create that Covered 50 * Code and the date of any change. Licensee must include in that file the 51 * documentation of any changes made by any predecessor Licensee. Licensee 52 * must include a prominent statement that the modification is derived, 53 * directly or indirectly, from Original Intel Code. 54 * 55 * 3.2. Redistribution of Source with no Rights to Further Distribute Source. 56 * Redistribution of source code of any substantial portion of the Covered 57 * Code or modification without rights to further distribute source must 58 * include the following Disclaimer and Export Compliance provision in the 59 * documentation and/or other materials provided with distribution. In 60 * addition, Licensee may not authorize further sublicense of source of any 61 * portion of the Covered Code, and must include terms to the effect that the 62 * license from Licensee to its licensee is limited to the intellectual 63 * property embodied in the software Licensee provides to its licensee, and 64 * not to intellectual property embodied in modifications its licensee may 65 * make. 66 * 67 * 3.3. Redistribution of Executable. Redistribution in executable form of any 68 * substantial portion of the Covered Code or modification must reproduce the 69 * above Copyright Notice, and the following Disclaimer and Export Compliance 70 * provision in the documentation and/or other materials provided with the 71 * distribution. 72 * 73 * 3.4. Intel retains all right, title, and interest in and to the Original 74 * Intel Code. 75 * 76 * 3.5. Neither the name Intel nor any other trademark owned or controlled by 77 * Intel shall be used in advertising or otherwise to promote the sale, use or 78 * other dealings in products derived from or relating to the Covered Code 79 * without prior written authorization from Intel. 80 * 81 * 4. Disclaimer and Export Compliance 82 * 83 * 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED 84 * HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE 85 * IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, 86 * INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY 87 * UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY 88 * IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A 89 * PARTICULAR PURPOSE. 90 * 91 * 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES 92 * OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR 93 * COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, 94 * SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY 95 * CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL 96 * HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS 97 * SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY 98 * LIMITED REMEDY. 99 * 100 * 4.3. Licensee shall not export, either directly or indirectly, any of this 101 * software or system incorporating such software without first obtaining any 102 * required license or other approval from the U. S. Department of Commerce or 103 * any other agency or department of the United States Government. In the 104 * event Licensee exports any such software from the United States or 105 * re-exports any such software from a foreign destination, Licensee shall 106 * ensure that the distribution and export/re-export of the software is in 107 * compliance with all laws, regulations, orders, or other restrictions of the 108 * U.S. Export Administration Regulations. Licensee agrees that neither it nor 109 * any of its subsidiaries will export/re-export any technical data, process, 110 * software, or service, directly or indirectly, to any country for which the 111 * United States government or any agency thereof requires an export license, 112 * other governmental approval, or letter of assurance, without first obtaining 113 * such license, approval or letter. 114 * 115 *****************************************************************************/ 116 117 #ifndef __ACTBL2_H__ 118 #define __ACTBL2_H__ 119 120 /* 121 * Prefered Power Management Profiles 122 */ 123 #define PM_UNSPECIFIED 0 124 #define PM_DESKTOP 1 125 #define PM_MOBILE 2 126 #define PM_WORKSTATION 3 127 #define PM_ENTERPRISE_SERVER 4 128 #define PM_SOHO_SERVER 5 129 #define PM_APPLIANCE_PC 6 130 131 /* 132 * ACPI Boot Arch Flags 133 */ 134 #define BAF_LEGACY_DEVICES 0x0001 135 #define BAF_8042_KEYBOARD_CONTROLLER 0x0002 136 137 #define FADT2_REVISION_ID 3 138 #define FADT2_MINUS_REVISION_ID 2 139 140 141 #pragma pack(1) 142 143 /* 144 * ACPI 2.0 Root System Description Table (RSDT) 145 */ 146 typedef struct rsdt_descriptor_rev2 147 { 148 ACPI_TABLE_HEADER_DEF /* ACPI common table header */ 149 UINT32 TableOffsetEntry[1]; /* Array of pointers to ACPI tables */ 150 151 } RSDT_DESCRIPTOR_REV2; 152 153 154 /* 155 * ACPI 2.0 Extended System Description Table (XSDT) 156 */ 157 typedef struct xsdt_descriptor_rev2 158 { 159 ACPI_TABLE_HEADER_DEF /* ACPI common table header */ 160 UINT64 TableOffsetEntry[1]; /* Array of pointers to ACPI tables */ 161 162 } XSDT_DESCRIPTOR_REV2; 163 164 165 /* 166 * ACPI 2.0 Firmware ACPI Control Structure (FACS) 167 */ 168 typedef struct facs_descriptor_rev2 169 { 170 char Signature[4]; /* ASCII table signature */ 171 UINT32 Length; /* Length of structure, in bytes */ 172 UINT32 HardwareSignature; /* Hardware configuration signature */ 173 UINT32 FirmwareWakingVector; /* 32-bit physical address of the Firmware Waking Vector. */ 174 UINT32 GlobalLock; /* Global Lock used to synchronize access to shared hardware resources */ 175 176 /* Flags (32 bits) */ 177 178 UINT8_BIT S4Bios_f : 1; /* 00: S4BIOS support is present */ 179 UINT8_BIT : 7; /* 01-07: Reserved, must be zero */ 180 UINT8 Reserved1[3]; /* 08-31: Reserved, must be zero */ 181 182 UINT64 XFirmwareWakingVector; /* 64-bit physical address of the Firmware Waking Vector. */ 183 UINT8 Version; /* Version of this table */ 184 UINT8 Reserved3[31]; /* Reserved, must be zero */ 185 186 } FACS_DESCRIPTOR_REV2; 187 188 189 /* 190 * ACPI 2.0+ Generic Address Structure (GAS) 191 */ 192 typedef struct acpi_generic_address 193 { 194 UINT8 AddressSpaceId; /* Address space where struct or register exists. */ 195 UINT8 RegisterBitWidth; /* Size in bits of given register */ 196 UINT8 RegisterBitOffset; /* Bit offset within the register */ 197 UINT8 AccessWidth; /* Minimum Access size (ACPI 3.0) */ 198 UINT64 Address; /* 64-bit address of struct or register */ 199 200 } ACPI_GENERIC_ADDRESS; 201 202 203 #define FADT_REV2_COMMON \ 204 UINT32 V1_FirmwareCtrl; /* 32-bit physical address of FACS */ \ 205 UINT32 V1_Dsdt; /* 32-bit physical address of DSDT */ \ 206 UINT8 Reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \ 207 UINT8 Prefer_PM_Profile; /* Conveys preferred power management profile to OSPM. */ \ 208 UINT16 SciInt; /* System vector of SCI interrupt */ \ 209 UINT32 SmiCmd; /* Port address of SMI command port */ \ 210 UINT8 AcpiEnable; /* Value to write to smi_cmd to enable ACPI */ \ 211 UINT8 AcpiDisable; /* Value to write to smi_cmd to disable ACPI */ \ 212 UINT8 S4BiosReq; /* Value to write to SMI CMD to enter S4BIOS state */ \ 213 UINT8 PstateCnt; /* Processor performance state control*/ \ 214 UINT32 V1_Pm1aEvtBlk; /* Port address of Power Mgt 1a AcpiEvent Reg Blk */ \ 215 UINT32 V1_Pm1bEvtBlk; /* Port address of Power Mgt 1b AcpiEvent Reg Blk */ \ 216 UINT32 V1_Pm1aCntBlk; /* Port address of Power Mgt 1a Control Reg Blk */ \ 217 UINT32 V1_Pm1bCntBlk; /* Port address of Power Mgt 1b Control Reg Blk */ \ 218 UINT32 V1_Pm2CntBlk; /* Port address of Power Mgt 2 Control Reg Blk */ \ 219 UINT32 V1_PmTmrBlk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \ 220 UINT32 V1_Gpe0Blk; /* Port addr of General Purpose AcpiEvent 0 Reg Blk */ \ 221 UINT32 V1_Gpe1Blk; /* Port addr of General Purpose AcpiEvent 1 Reg Blk */ \ 222 UINT8 Pm1EvtLen; /* Byte Length of ports at pm1X_evt_blk */ \ 223 UINT8 Pm1CntLen; /* Byte Length of ports at pm1X_cnt_blk */ \ 224 UINT8 Pm2CntLen; /* Byte Length of ports at pm2_cnt_blk */ \ 225 UINT8 PmTmLen; /* Byte Length of ports at pm_tm_blk */ \ 226 UINT8 Gpe0BlkLen; /* Byte Length of ports at gpe0_blk */ \ 227 UINT8 Gpe1BlkLen; /* Byte Length of ports at gpe1_blk */ \ 228 UINT8 Gpe1Base; /* Offset in gpe model where gpe1 events start */ \ 229 UINT8 CstCnt; /* Support for the _CST object and C States change notification.*/ \ 230 UINT16 Plvl2Lat; /* Worst case HW latency to enter/exit C2 state */ \ 231 UINT16 Plvl3Lat; /* Worst case HW latency to enter/exit C3 state */ \ 232 UINT16 FlushSize; /* Number of flush strides that need to be read */ \ 233 UINT16 FlushStride; /* Processor's memory cache line width, in bytes */ \ 234 UINT8 DutyOffset; /* Processor's duty cycle index in processor's P_CNT reg*/ \ 235 UINT8 DutyWidth; /* Processor's duty cycle value bit width in P_CNT register.*/ \ 236 UINT8 DayAlrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \ 237 UINT8 MonAlrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \ 238 UINT8 Century; /* Index to century in RTC CMOS RAM */ \ 239 UINT16 IapcBootArch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/ 240 241 /* 242 * ACPI 2.0+ Fixed ACPI Description Table (FADT) 243 */ 244 typedef struct fadt_descriptor_rev2 245 { 246 ACPI_TABLE_HEADER_DEF /* ACPI common table header */ 247 FADT_REV2_COMMON 248 UINT8 Reserved2; /* Reserved, must be zero */ 249 250 /* Flags (32 bits) */ 251 252 UINT8_BIT WbInvd : 1; /* 00: The wbinvd instruction works properly */ 253 UINT8_BIT WbInvdFlush : 1; /* 01: The wbinvd flushes but does not invalidate */ 254 UINT8_BIT ProcC1 : 1; /* 02: All processors support C1 state */ 255 UINT8_BIT Plvl2Up : 1; /* 03: C2 state works on MP system */ 256 UINT8_BIT PwrButton : 1; /* 04: Power button is handled as a generic feature */ 257 UINT8_BIT SleepButton : 1; /* 05: Sleep button is handled as a generic feature, or not present */ 258 UINT8_BIT FixedRTC : 1; /* 06: RTC wakeup stat not in fixed register space */ 259 UINT8_BIT Rtcs4 : 1; /* 07: RTC wakeup stat not possible from S4 */ 260 UINT8_BIT TmrValExt : 1; /* 08: tmr_val is 32 bits 0=24-bits */ 261 UINT8_BIT DockCap : 1; /* 09: Docking supported */ 262 UINT8_BIT ResetRegSup : 1; /* 10: System reset via the FADT RESET_REG supported */ 263 UINT8_BIT SealedCase : 1; /* 11: No internal expansion capabilities and case is sealed */ 264 UINT8_BIT Headless : 1; /* 12: No local video capabilities or local input devices */ 265 UINT8_BIT CpuSwSleep : 1; /* 13: Must execute native instruction after writing SLP_TYPx register */ 266 267 UINT8_BIT PciExpWak : 1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ 268 UINT8_BIT UsePlatformClock : 1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */ 269 UINT8_BIT S4RtcStsValid : 1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ 270 UINT8_BIT RemotePowerOnCapable : 1; /* 17: System is compatible with remote power on (ACPI 3.0) */ 271 UINT8_BIT ForceApicClusterModel : 1; /* 18: All local APICs must use cluster model (ACPI 3.0) */ 272 UINT8_BIT ForceApicPhysicalDestinationMode : 1; /* 19: All local xAPICs must use physical dest mode (ACPI 3.0) */ 273 UINT8_BIT : 4; /* 20-23: Reserved, must be zero */ 274 UINT8 Reserved3; /* 24-31: Reserved, must be zero */ 275 276 ACPI_GENERIC_ADDRESS ResetRegister; /* Reset register address in GAS format */ 277 UINT8 ResetValue; /* Value to write to the ResetRegister port to reset the system */ 278 UINT8 Reserved4[3]; /* These three bytes must be zero */ 279 UINT64 XFirmwareCtrl; /* 64-bit physical address of FACS */ 280 UINT64 XDsdt; /* 64-bit physical address of DSDT */ 281 ACPI_GENERIC_ADDRESS XPm1aEvtBlk; /* Extended Power Mgt 1a AcpiEvent Reg Blk address */ 282 ACPI_GENERIC_ADDRESS XPm1bEvtBlk; /* Extended Power Mgt 1b AcpiEvent Reg Blk address */ 283 ACPI_GENERIC_ADDRESS XPm1aCntBlk; /* Extended Power Mgt 1a Control Reg Blk address */ 284 ACPI_GENERIC_ADDRESS XPm1bCntBlk; /* Extended Power Mgt 1b Control Reg Blk address */ 285 ACPI_GENERIC_ADDRESS XPm2CntBlk; /* Extended Power Mgt 2 Control Reg Blk address */ 286 ACPI_GENERIC_ADDRESS XPmTmrBlk; /* Extended Power Mgt Timer Ctrl Reg Blk address */ 287 ACPI_GENERIC_ADDRESS XGpe0Blk; /* Extended General Purpose AcpiEvent 0 Reg Blk address */ 288 ACPI_GENERIC_ADDRESS XGpe1Blk; /* Extended General Purpose AcpiEvent 1 Reg Blk address */ 289 290 } FADT_DESCRIPTOR_REV2; 291 292 293 /* "Down-revved" ACPI 2.0 FADT descriptor */ 294 295 typedef struct fadt_descriptor_rev2_minus 296 { 297 ACPI_TABLE_HEADER_DEF /* ACPI common table header */ 298 FADT_REV2_COMMON 299 UINT8 Reserved2; /* Reserved, must be zero */ 300 UINT32 Flags; 301 ACPI_GENERIC_ADDRESS ResetRegister; /* Reset register address in GAS format */ 302 UINT8 ResetValue; /* Value to write to the ResetRegister port to reset the system. */ 303 UINT8 Reserved7[3]; /* Reserved, must be zero */ 304 305 } FADT_DESCRIPTOR_REV2_MINUS; 306 307 308 /* ECDT - Embedded Controller Boot Resources Table */ 309 310 typedef struct ec_boot_resources 311 { 312 ACPI_TABLE_HEADER_DEF 313 ACPI_GENERIC_ADDRESS EcControl; /* Address of EC command/status register */ 314 ACPI_GENERIC_ADDRESS EcData; /* Address of EC data register */ 315 UINT32 Uid; /* Unique ID - must be same as the EC _UID method */ 316 UINT8 GpeBit; /* The GPE for the EC */ 317 UINT8 EcId[1]; /* Full namepath of the EC in the ACPI namespace */ 318 319 } EC_BOOT_RESOURCES; 320 321 322 /* SRAT - System Resource Affinity Table */ 323 324 typedef struct static_resource_alloc 325 { 326 UINT8 Type; 327 UINT8 Length; 328 UINT8 ProximityDomainLo; 329 UINT8 ApicId; 330 331 /* Flags (32 bits) */ 332 333 UINT8_BIT Enabled :1; /* 00: Use affinity structure */ 334 UINT8_BIT :7; /* 01-07: Reserved, must be zero */ 335 UINT8 Reserved3[3]; /* 08-31: Reserved, must be zero */ 336 337 UINT8 LocalSapicEid; 338 UINT8 ProximityDomainHi[3]; 339 UINT32 Reserved4; /* Reserved, must be zero */ 340 341 } STATIC_RESOURCE_ALLOC; 342 343 typedef struct memory_affinity 344 { 345 UINT8 Type; 346 UINT8 Length; 347 UINT32 ProximityDomain; 348 UINT16 Reserved3; 349 UINT64 BaseAddress; 350 UINT64 AddressLength; 351 UINT32 Reserved4; 352 353 /* Flags (32 bits) */ 354 355 UINT8_BIT Enabled :1; /* 00: Use affinity structure */ 356 UINT8_BIT HotPluggable :1; /* 01: Memory region is hot pluggable */ 357 UINT8_BIT NonVolatile :1; /* 02: Memory is non-volatile */ 358 UINT8_BIT :5; /* 03-07: Reserved, must be zero */ 359 UINT8 Reserved5[3]; /* 08-31: Reserved, must be zero */ 360 361 UINT64 Reserved6; /* Reserved, must be zero */ 362 363 } MEMORY_AFFINITY; 364 365 typedef struct system_resource_affinity 366 { 367 ACPI_TABLE_HEADER_DEF 368 UINT32 Reserved1; /* Must be value '1' */ 369 UINT64 Reserved2; /* Reserved, must be zero */ 370 371 } SYSTEM_RESOURCE_AFFINITY; 372 373 374 /* SLIT - System Locality Distance Information Table */ 375 376 typedef struct system_locality_info 377 { 378 ACPI_TABLE_HEADER_DEF 379 UINT64 LocalityCount; 380 UINT8 Entry[1][1]; 381 382 } SYSTEM_LOCALITY_INFO; 383 384 385 #pragma pack() 386 387 #endif /* __ACTBL2_H__ */ 388 389