1# 2# CDDL HEADER START 3# 4# The contents of this file are subject to the terms of the 5# Common Development and Distribution License (the "License"). 6# You may not use this file except in compliance with the License. 7# 8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9# or http://www.opensolaris.org/os/licensing. 10# See the License for the specific language governing permissions 11# and limitations under the License. 12# 13# When distributing Covered Code, include this CDDL HEADER in each 14# file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15# If applicable, add the following below this CDDL HEADER, with the 16# fields enclosed by brackets "[]" replaced with your own identifying 17# information: Portions Copyright [yyyy] [name of copyright owner] 18# 19# CDDL HEADER END 20# 21# 22# uts/intel/scsa2usb/Makefile 23# Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24# Use is subject to license terms. 25# 26# 27# This makefile drives the production of the scsa2usb driver 28# kernel module. intel architecture dependent 29# 30 31# 32# Path to the base of the uts directory tree (usually /usr/src/uts). 33# 34UTSBASE = ../.. 35 36# 37# Define the module and object file sets. 38# 39MODULE = scsa2usb 40OBJECTS = $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%) 41LINTS = $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln) 42ROOTMODULE = $(ROOT_DRV_DIR)/$(MODULE) 43CONF_SRCDIR = $(UTSBASE)/common/io/usb/scsa2usb 44WARLOCK_OUT = $(SCSA2USB_OBJS:%.o=%.ll) 45WARLOCK_OK = $(MODULE).ok 46WLCMD_DIR = $(UTSBASE)/common/io/warlock 47 48# 49# Include common rules. 50# 51include $(UTSBASE)/intel/Makefile.intel 52 53# 54# Define targets 55# 56ALL_TARGET = $(BINARY) $(SRC_CONFILE) 57LINT_TARGET = $(MODULE).lint 58INSTALL_TARGET = $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE) 59 60# 61# Override defaults to build a unique, local modstubs.o. 62# 63MODSTUBS_DIR = $(OBJS_DIR) 64CLEANFILES += $(MODSTUBS_O) 65 66# 67# depends on misc/usba misc/scsi 68# 69LDFLAGS += -dy -Nmisc/usba -Nmisc/scsi 70 71# 72# For now, disable these lint checks; maintainers should endeavor 73# to investigate and remove these for maximum lint coverage. 74# Please do not carry these forward to new Makefiles. 75# 76LINTTAGS += -erroff=E_BAD_PTR_CAST_ALIGN 77 78CERRWARN += -_gcc=-Wno-unused-label 79CERRWARN += -_gcc=-Wno-uninitialized 80 81# 82# Default build targets. 83# 84.KEEP_STATE: 85 86def: $(DEF_DEPS) 87 88all: $(ALL_DEPS) 89 90clean: $(CLEAN_DEPS) 91 $(RM) $(WARLOCK_OUT) $(WARLOCK_OK) 92 93clobber: $(CLOBBER_DEPS) 94 $(RM) $(WARLOCK_OUT) $(WARLOCK_OK) 95 96lint: $(LINT_DEPS) 97 98modlintlib: $(MODLINTLIB_DEPS) 99 100clean.lint: $(CLEAN_LINT_DEPS) 101 102install: $(INSTALL_DEPS) 103 104# 105# Include common targets. 106# 107include $(UTSBASE)/intel/Makefile.targ 108 109# 110# Defines for local commands. 111# 112WARLOCK = warlock 113WLCC = wlcc 114TOUCH = touch 115TEST = test 116 117# 118# lock_lint rules 119# 120USBA_FILES = $(USBA_WITHOUT_WUSB_OBJS:%.o=../usba/%.ll) 121UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll) 122OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll) 123EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll) 124SD_FILES = $(SD_OBJS:%.o=../sd/%.ll) 125ST_FILES = $(ST_OBJS:%.o=../st/%.ll) 126SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll) 127CMLB_FILES = $(CMLB_OBJS:%.o=-l ../cmlb/%.ll) 128 129warlock: $(WARLOCK_OK) warlock_with_usba 130 131$(WARLOCK_OK): $(WARLOCK_OUT) $(WLCMD_DIR)/scsa2usb.wlcmd warlock_ddi.files \ 132 scsi.files 133 $(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT) \ 134 ../warlock/scsi.ll \ 135 $(SCSI_FILES) \ 136 -l ../warlock/ddi_dki_impl.ll 137 $(TOUCH) $@ 138 139%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \ 140 $(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \ 141 $(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \ 142 $(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h 143 $(WLCC) $(CPPFLAGS) -DDEBUG -o $@ $< 144 145warlock_with_usba: $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \ 146 $(WARLOCK_OUT) usba_files \ 147 ohci_files ehci_files uhci_files warlock_ddi.files sd.files st.files \ 148 cmlb.files scsi.files 149 $(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \ 150 $(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \ 151 $(SD_FILES) \ 152 $(ST_FILES) \ 153 $(CMLB_FILES) \ 154 $(SCSI_FILES) \ 155 $(WARLOCK_OUT) \ 156 -l ../warlock/ddi_dki_impl.ll 157 158usba_files: 159 @cd ../usba;pwd; $(MAKE) warlock 160 161uhci_files: 162 @cd ../uhci;pwd; $(MAKE) warlock 163 164ohci_files: 165 @cd ../ohci;pwd; $(MAKE) warlock 166 167ehci_files: 168 @cd ../ehci;pwd; $(MAKE) warlock 169 170warlock_ddi.files: 171 @cd ../warlock; pwd; $(MAKE) warlock 172 173scsi.files: 174 @cd ../scsi; pwd; $(MAKE) warlock 175 176sd.files: 177 @cd ../sd; pwd; $(MAKE) warlock_alone 178 179st.files: 180 @cd ../st; pwd; $(MAKE) warlock_alone 181 182cmlb.files: 183 @cd ../cmlb; pwd; $(MAKE) warlock 184