xref: /titanic_41/usr/src/uts/intel/scsa2usb/Makefile (revision aa98ce2c4ecbce8afe8b7b253a911ab24fdded32)
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# uts/intel/scsa2usb/Makefile
23# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24# Use is subject to license terms.
25#
26# Copyright 2014 Garrett D'Amore <garrett@damore.org>
27#
28#	This makefile drives the production of the scsa2usb driver
29#	kernel module. intel architecture dependent
30#
31
32#
33#	Path to the base of the uts directory tree (usually /usr/src/uts).
34#
35UTSBASE	= ../..
36
37#
38#	Define the module and object file sets.
39#
40MODULE		= scsa2usb
41OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
42LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
43ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
44CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
45WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
46WARLOCK_OK	= $(MODULE).ok
47WLCMD_DIR	= $(UTSBASE)/common/io/warlock
48
49#
50#	Include common rules.
51#
52include $(UTSBASE)/intel/Makefile.intel
53
54#
55#	Define targets
56#
57ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
58LINT_TARGET	= $(MODULE).lint
59INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
60
61#
62#	Override defaults to build a unique, local modstubs.o.
63#
64MODSTUBS_DIR	 = $(OBJS_DIR)
65CLEANFILES	+= $(MODSTUBS_O)
66
67#
68# depends on misc/usba misc/scsi
69#
70LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
71
72#
73# For now, disable these lint checks; maintainers should endeavor
74# to investigate and remove these for maximum lint coverage.
75# Please do not carry these forward to new Makefiles.
76#
77LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
78
79CERRWARN	+= -_gcc=-Wno-unused-label
80CERRWARN	+= -_gcc=-Wno-uninitialized
81
82#
83#	Default build targets.
84#
85.KEEP_STATE:
86
87def:		$(DEF_DEPS)
88
89all:		$(ALL_DEPS)
90
91clean:		$(CLEAN_DEPS)
92		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
93
94clobber:	$(CLOBBER_DEPS)
95		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
96
97lint:		$(LINT_DEPS)
98
99modlintlib:	$(MODLINTLIB_DEPS)
100
101clean.lint:	$(CLEAN_LINT_DEPS)
102
103install:	$(INSTALL_DEPS)
104
105#
106#	Include common targets.
107#
108include $(UTSBASE)/intel/Makefile.targ
109
110#
111#	Defines for local commands.
112#
113WARLOCK		= warlock
114WLCC		= wlcc
115TOUCH		= touch
116TEST		= test
117
118#
119#	lock_lint rules
120#
121USBA_FILES = $(USBA_OBJS:%.o=../usba/%.ll)
122UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
123OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
124EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
125SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
126ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
127SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
128CMLB_FILES = $(CMLB_OBJS:%.o=-l ../cmlb/%.ll)
129
130warlock: $(WARLOCK_OK) warlock_with_usba
131
132$(WARLOCK_OK): $(WARLOCK_OUT) $(WLCMD_DIR)/scsa2usb.wlcmd warlock_ddi.files \
133	scsi.files
134	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT)  \
135		../warlock/scsi.ll \
136		$(SCSI_FILES) \
137		-l ../warlock/ddi_dki_impl.ll
138	$(TOUCH) $@
139
140%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
141		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
142		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
143		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
144	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
145
146warlock_with_usba: $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
147	$(WARLOCK_OUT) usba_files \
148	ohci_files ehci_files uhci_files warlock_ddi.files sd.files st.files \
149	cmlb.files scsi.files
150	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
151		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
152		$(SD_FILES) \
153		$(ST_FILES) \
154		$(CMLB_FILES) \
155		$(SCSI_FILES) \
156		$(WARLOCK_OUT) \
157		-l ../warlock/ddi_dki_impl.ll
158
159usba_files:
160	@cd ../usba;pwd; $(MAKE) warlock
161
162uhci_files:
163	@cd ../uhci;pwd; $(MAKE) warlock
164
165ohci_files:
166	@cd ../ohci;pwd; $(MAKE) warlock
167
168ehci_files:
169	@cd ../ehci;pwd; $(MAKE) warlock
170
171warlock_ddi.files:
172	@cd ../warlock; pwd; $(MAKE) warlock
173
174scsi.files:
175	@cd ../scsi; pwd; $(MAKE) warlock
176
177sd.files:
178	@cd ../sd; pwd; $(MAKE) warlock_alone
179
180st.files:
181	@cd ../st; pwd; $(MAKE) warlock_alone
182
183cmlb.files:
184	 @cd ../cmlb; pwd; $(MAKE) warlock
185