xref: /titanic_41/usr/src/uts/intel/io/pciex/pcie_nvidia.c (revision f3312ec0e8acbd249df97358fb8c3ca92f4e089c)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
24  */
25 
26 /*
27  *	Library file that has code for PCIe booting
28  */
29 
30 #include <sys/conf.h>
31 #include <sys/pci.h>
32 #include <sys/sunndi.h>
33 #include <sys/pcie.h>
34 #include <sys/pcie_impl.h>
35 #include <sys/pci_cfgspace.h>
36 #include <io/pciex/pcie_nvidia.h>
37 
38 /*
39  * PCI Configuration (Nvidia chipsets, PCIe) related library functions
40  */
41 
42 /* Globals */
43 extern int pci_boot_debug;
44 
45 extern uint64_t mcfg_mem_base;
46 
47 boolean_t
48 check_if_device_is_pciex(dev_info_t *cdip, uchar_t bus, uchar_t dev,
49     uchar_t func, boolean_t *slot_valid, ushort_t *slot_number,
50     ushort_t *is_pci_bridge)
51 {
52 	boolean_t found_pciex = B_FALSE;
53 	ushort_t cap;
54 	ushort_t capsp;
55 	ushort_t cap_count = PCI_CAP_MAX_PTR;
56 	ushort_t status;
57 	uint32_t slot_cap;
58 
59 	*slot_valid = B_FALSE;
60 
61 	status = (*pci_getw_func)(bus, dev, func, PCI_CONF_STAT);
62 	if (!(status & PCI_STAT_CAP))
63 		return (B_FALSE);
64 
65 	capsp = (*pci_getb_func)(bus, dev, func, PCI_CONF_CAP_PTR);
66 	while (cap_count-- && capsp >= PCI_CAP_PTR_OFF) {
67 		capsp &= PCI_CAP_PTR_MASK;
68 		cap = (*pci_getb_func)(bus, dev, func, capsp);
69 
70 		if (cap == PCI_CAP_ID_PCI_E) {
71 #ifdef	DEBUG
72 			if (pci_boot_debug)
73 				cmn_err(CE_CONT, "PCI-Express (%x,%x,%x) "
74 				    "capability found\n", bus, dev, func);
75 #endif	/* DEBUG */
76 
77 			status = (*pci_getw_func)(bus, dev, func, capsp + 2);
78 			/*
79 			 * See section 7.8.2 of PCI-Express Base Spec v1.0a
80 			 * for Device/Port Type.
81 			 * PCIE_PCIECAP_DEV_TYPE_PCIE2PCI implies that the
82 			 * device is a PCIe2PCI bridge
83 			 */
84 			*is_pci_bridge =
85 			    ((status & PCIE_PCIECAP_DEV_TYPE_MASK) ==
86 			    PCIE_PCIECAP_DEV_TYPE_PCIE2PCI) ? 1 : 0;
87 
88 			/*
89 			 * Check for "Slot  Implemented" bit
90 			 * PCIE_PCIECAP_SLOT_IMPL implies that.
91 			 */
92 			if (status & PCIE_PCIECAP_SLOT_IMPL) {
93 				/* offset 14h is Slot Cap Register */
94 				slot_cap = (*pci_getl_func)(bus, dev, func,
95 				    capsp + PCIE_SLOTCAP);
96 				*slot_valid = B_TRUE;
97 				*slot_number =
98 				    PCIE_SLOTCAP_PHY_SLOT_NUM(slot_cap);
99 
100 				/* Is PCI Express HotPlug capability set? */
101 				if (cdip &&
102 				    (slot_cap & PCIE_SLOTCAP_HP_CAPABLE)) {
103 					(void) ndi_prop_update_int(
104 					    DDI_DEV_T_NONE, cdip,
105 					    "pci-hotplug-type",
106 					    INBAND_HPC_PCIE);
107 				}
108 			}
109 
110 			found_pciex = B_TRUE;
111 		}
112 
113 		if (cdip && (cap == PCI_CAP_ID_PCI_HOTPLUG)) {
114 			(void) ndi_prop_update_int(DDI_DEV_T_NONE, cdip,
115 			    "pci-hotplug-type", INBAND_HPC_SHPC);
116 		}
117 
118 		capsp = (*pci_getb_func)(bus, dev, func,
119 		    capsp + PCI_CAP_NEXT_PTR);
120 	}
121 
122 	return (found_pciex);
123 }
124 
125 
126 /*
127  * scan all buses, devices, functions to look for any
128  * PCI-Express device in the system.
129  * If found, return B_TRUE else B_FALSE
130  */
131 boolean_t
132 look_for_any_pciex_device(uchar_t bus)
133 {
134 	uchar_t dev, func;
135 	uchar_t nfunc, header;
136 	ushort_t venid, slot_num, is_pci_bridge = 0;
137 	boolean_t slot_valid;
138 
139 	for (dev = 0; dev < 32; dev++) {
140 		nfunc = 1;
141 		for (func = 0; func < nfunc; func++) {
142 #ifdef	DEBUG
143 			if (pci_boot_debug)
144 				cmn_err(CE_NOTE, "pciex dev 0x%x, func 0x%x",
145 				    dev, func);
146 #endif	/* DEBUG */
147 
148 			venid = (*pci_getw_func)(bus, dev, func,
149 			    PCI_CONF_VENID);
150 			/* no function at this address */
151 			if ((venid == 0xffff) || (venid == 0))
152 				continue;
153 
154 			header = (*pci_getb_func)(bus, dev, func,
155 			    PCI_CONF_HEADER);
156 			if (header == 0xff)
157 				continue; /* illegal value */
158 
159 			/*
160 			 * according to some mail from Microsoft posted to
161 			 * the pci-drivers alias, their only requirement for
162 			 * a multifunction device is for the 1st function to
163 			 * have to PCI_HEADER_MULTI bit set.
164 			 */
165 			if ((func == 0) && (header & PCI_HEADER_MULTI))
166 				nfunc = 8;
167 
168 			if (check_if_device_is_pciex(NULL, bus, dev, func,
169 			    &slot_valid, &slot_num, &is_pci_bridge) == B_TRUE)
170 				return (B_TRUE);
171 		} /* end of func */
172 	} /* end of dev */
173 
174 	return (B_FALSE);
175 }
176 
177 boolean_t
178 create_pcie_root_bus(uchar_t bus, dev_info_t *dip)
179 {
180 	pcie_bus_t *bus_p;
181 
182 	/*
183 	 * Currently this is being hard-coded.
184 	 * We need to figure out if the root bus does indeed
185 	 * have PCI-Ex in the path by looking for MCFG in
186 	 * the ACPI tables
187 	 */
188 	if (look_for_any_pciex_device(bus) == B_FALSE)
189 		return (B_FALSE);
190 
191 #ifdef	DEBUG
192 	if (pci_boot_debug)
193 		cmn_err(CE_CONT, "Found PCI-Ex in the system\n");
194 #endif	/* DEBUG */
195 	(void) ndi_prop_update_string(DDI_DEV_T_NONE, dip,
196 	    "device_type", "pciex");
197 	(void) ndi_prop_update_string(DDI_DEV_T_NONE, dip,
198 	    "compatible", "pciex_root_complex");
199 
200 	pcie_rc_init_bus(dip);
201 
202 	/* save base addr in bus_t for pci_cfgacc_xxx() */
203 	bus_p = PCIE_DIP2BUS(dip);
204 	bus_p->bus_cfgacc_base = mcfg_mem_base;
205 
206 	return (B_TRUE);
207 }
208 
209 
210 /*
211  * add_nvidia_isa_bridge_props():
212  *	To enable native hotplug; we need to map in two I/O BARs
213  *	from ISA bridge's config space
214  *
215  * NOTE: For now, this function is only used for Nvidia's CrushK 8-04 chipsets.
216  */
217 void
218 add_nvidia_isa_bridge_props(dev_info_t *dip, uchar_t bus, uchar_t dev,
219     uchar_t func)
220 {
221 	uint_t devloc, base;
222 	pci_regspec_t regs[2] = {{0}};
223 	pci_regspec_t assigned[2] = {{0}};
224 
225 	devloc = (uint_t)bus << PCI_REG_BUS_SHIFT |
226 	    (uint_t)dev << PCI_REG_DEV_SHIFT |
227 	    (uint_t)func << PCI_REG_FUNC_SHIFT;
228 	regs[0].pci_phys_hi = devloc;
229 
230 	/* System Control BAR i/o space */
231 	base = (*pci_getl_func)(bus, dev, func,
232 	    NVIDIA_CK804_ISA_SYSCTRL_BAR_OFF);
233 	regs[0].pci_size_low = assigned[0].pci_size_low = PCI_CONF_HDR_SIZE;
234 	assigned[0].pci_phys_hi = regs[0].pci_phys_hi = (PCI_RELOCAT_B |
235 	    PCI_ADDR_IO | devloc | NVIDIA_CK804_ISA_SYSCTRL_BAR_OFF);
236 	assigned[0].pci_phys_low = regs[0].pci_phys_low =
237 	    base & PCI_BASE_IO_ADDR_M;
238 
239 	/* Analog BAR i/o space */
240 	base = (*pci_getl_func)(bus, dev, func,
241 	    NVIDIA_CK804_ISA_ANALOG_BAR_OFF);
242 	regs[1].pci_size_low = assigned[1].pci_size_low = PCI_CONF_HDR_SIZE;
243 	assigned[1].pci_phys_hi = regs[1].pci_phys_hi = (PCI_RELOCAT_B |
244 	    PCI_ADDR_IO | devloc | NVIDIA_CK804_ISA_ANALOG_BAR_OFF);
245 	assigned[1].pci_phys_low = regs[1].pci_phys_low =
246 	    base & PCI_BASE_IO_ADDR_M;
247 
248 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg",
249 	    (int *)regs, 2 * sizeof (pci_regspec_t) / sizeof (int));
250 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
251 	    "assigned-addresses",
252 	    (int *)assigned, 2 * sizeof (pci_regspec_t) / sizeof (int));
253 }
254