xref: /titanic_41/usr/src/uts/intel/io/pciex/pcie_nvidia.c (revision cde2885fdf538266ee2a3b08dee2d5075ce8fa2b)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  *	Library file that has code for PCIe booting
29  */
30 
31 #include <sys/conf.h>
32 #include <sys/pci.h>
33 #include <sys/sunndi.h>
34 #include <sys/pcie.h>
35 #include <sys/pci_cfgspace.h>
36 #include <io/pciex/pcie_nvidia.h>
37 
38 /*
39  * PCI Configuration (Nvidia chipsets, PCIe) related library functions
40  */
41 static boolean_t	look_for_any_pciex_device(uchar_t);
42 
43 /* Globals */
44 extern int pci_boot_debug;
45 
46 boolean_t
47 check_if_device_is_pciex(dev_info_t *cdip, uchar_t bus, uchar_t dev,
48     uchar_t func, ushort_t *slot_number, ushort_t *is_pci_bridge)
49 {
50 	boolean_t found_pciex = B_FALSE;
51 	ushort_t cap;
52 	ushort_t capsp;
53 	ushort_t cap_count = PCI_CAP_MAX_PTR;
54 	ushort_t status;
55 	uint32_t slot_cap;
56 
57 	*slot_number = 0;
58 
59 	status = (*pci_getw_func)(bus, dev, func, PCI_CONF_STAT);
60 	if (!(status & PCI_STAT_CAP))
61 		return (B_FALSE);
62 
63 	capsp = (*pci_getb_func)(bus, dev, func, PCI_CONF_CAP_PTR);
64 	while (cap_count-- && capsp >= PCI_CAP_PTR_OFF) {
65 		capsp &= PCI_CAP_PTR_MASK;
66 		cap = (*pci_getb_func)(bus, dev, func, capsp);
67 
68 		if (cap == PCI_CAP_ID_PCI_E) {
69 #ifdef	DEBUG
70 			if (pci_boot_debug)
71 				cmn_err(CE_CONT, "PCI-Express (%x,%x,%x) "
72 				    "capability found\n", bus, dev, func);
73 #endif	/* DEBUG */
74 
75 			status = (*pci_getw_func)(bus, dev, func, capsp + 2);
76 			/*
77 			 * See section 7.8.2 of PCI-Express Base Spec v1.0a
78 			 * for Device/Port Type.
79 			 * PCIE_PCIECAP_DEV_TYPE_PCIE2PCI implies that the
80 			 * device is a PCIe2PCI bridge
81 			 */
82 			*is_pci_bridge =
83 			    ((status & PCIE_PCIECAP_DEV_TYPE_MASK) ==
84 			    PCIE_PCIECAP_DEV_TYPE_PCIE2PCI) ? 1 : 0;
85 
86 			/*
87 			 * Check for "Slot  Implemented" bit
88 			 * PCIE_PCIECAP_SLOT_IMPL implies that.
89 			 */
90 			if (status & PCIE_PCIECAP_SLOT_IMPL) {
91 				/* offset 14h is Slot Cap Register */
92 				slot_cap = (*pci_getl_func)(bus, dev, func,
93 				    capsp + PCIE_SLOTCAP);
94 				*slot_number =
95 				    PCIE_SLOTCAP_PHY_SLOT_NUM(slot_cap);
96 
97 				/* Is PCI Express HotPlug capability set? */
98 				if (cdip &&
99 				    (slot_cap & PCIE_SLOTCAP_HP_CAPABLE)) {
100 					(void) ndi_prop_update_int(
101 					    DDI_DEV_T_NONE, cdip,
102 					    "pci-hotplug-type",
103 					    INBAND_HPC_PCIE);
104 				}
105 			}
106 
107 			found_pciex = B_TRUE;
108 		}
109 
110 		if (cdip && (cap == PCI_CAP_ID_PCI_HOTPLUG)) {
111 			(void) ndi_prop_update_int(DDI_DEV_T_NONE, cdip,
112 			    "pci-hotplug-type", INBAND_HPC_SHPC);
113 		}
114 
115 		capsp = (*pci_getb_func)(bus, dev, func,
116 		    capsp + PCI_CAP_NEXT_PTR);
117 	}
118 
119 	return (found_pciex);
120 }
121 
122 
123 /*
124  * scan all buses, devices, functions to look for any
125  * PCI-Express device in the system.
126  * If found, return B_TRUE else B_FALSE
127  */
128 static boolean_t
129 look_for_any_pciex_device(uchar_t bus)
130 {
131 	uchar_t dev, func;
132 	uchar_t nfunc, header;
133 	ushort_t venid, slot_num, is_pci_bridge = 0;
134 
135 	for (dev = 0; dev < 32; dev++) {
136 		nfunc = 1;
137 		for (func = 0; func < nfunc; func++) {
138 #ifdef	DEBUG
139 			if (pci_boot_debug)
140 				cmn_err(CE_NOTE, "pciex dev 0x%x, func 0x%x",
141 				    dev, func);
142 #endif	/* DEBUG */
143 
144 			venid = (*pci_getw_func)(bus, dev, func,
145 			    PCI_CONF_VENID);
146 			/* no function at this address */
147 			if ((venid == 0xffff) || (venid == 0))
148 				continue;
149 
150 			header = (*pci_getb_func)(bus, dev, func,
151 			    PCI_CONF_HEADER);
152 			if (header == 0xff)
153 				continue; /* illegal value */
154 
155 			/*
156 			 * according to some mail from Microsoft posted to
157 			 * the pci-drivers alias, their only requirement for
158 			 * a multifunction device is for the 1st function to
159 			 * have to PCI_HEADER_MULTI bit set.
160 			 */
161 			if ((func == 0) && (header & PCI_HEADER_MULTI))
162 				nfunc = 8;
163 
164 			if (check_if_device_is_pciex(NULL, bus, dev, func,
165 			    &slot_num, &is_pci_bridge) == B_TRUE)
166 				return (B_TRUE);
167 		} /* end of func */
168 	} /* end of dev */
169 
170 	return (B_FALSE);
171 }
172 
173 
174 boolean_t
175 create_pcie_root_bus(uchar_t bus, dev_info_t *dip)
176 {
177 	/*
178 	 * Currently this is being hard-coded.
179 	 * We need to figure out if the root bus does indeed
180 	 * have PCI-Ex in the path by looking for MCFG in
181 	 * the ACPI tables
182 	 */
183 	if (look_for_any_pciex_device(bus) == B_FALSE)
184 		return (B_FALSE);
185 
186 #ifdef	DEBUG
187 	if (pci_boot_debug)
188 		cmn_err(CE_CONT, "Found PCI-Ex in the system\n");
189 #endif	/* DEBUG */
190 	(void) ndi_prop_update_string(DDI_DEV_T_NONE, dip,
191 	    "device_type", "pciex");
192 	(void) ndi_prop_update_string(DDI_DEV_T_NONE, dip,
193 	    "compatible", "pciex_root_complex");
194 
195 	return (B_TRUE);
196 }
197 
198 
199 /*
200  * add_nvidia_isa_bridge_props():
201  *	To enable native hotplug; we need to map in two I/O BARs
202  *	from ISA bridge's config space
203  *
204  * NOTE: For now, this function is only used for Nvidia's CrushK 8-04 chipsets.
205  */
206 void
207 add_nvidia_isa_bridge_props(dev_info_t *dip, uchar_t bus, uchar_t dev,
208     uchar_t func)
209 {
210 	uint_t devloc, base;
211 	pci_regspec_t regs[2] = {{0}};
212 	pci_regspec_t assigned[2] = {{0}};
213 
214 	devloc = (uint_t)bus << PCI_REG_BUS_SHIFT |
215 	    (uint_t)dev << PCI_REG_DEV_SHIFT |
216 	    (uint_t)func << PCI_REG_FUNC_SHIFT;
217 	regs[0].pci_phys_hi = devloc;
218 
219 	/* System Control BAR i/o space */
220 	base = (*pci_getl_func)(bus, dev, func,
221 	    NVIDIA_CK804_ISA_SYSCTRL_BAR_OFF);
222 	regs[0].pci_size_low = assigned[0].pci_size_low = PCI_CONF_HDR_SIZE;
223 	assigned[0].pci_phys_hi = regs[0].pci_phys_hi = (PCI_RELOCAT_B |
224 	    PCI_ADDR_IO | devloc | NVIDIA_CK804_ISA_SYSCTRL_BAR_OFF);
225 	assigned[0].pci_phys_low = regs[0].pci_phys_low =
226 	    base & PCI_BASE_IO_ADDR_M;
227 
228 	/* Analog BAR i/o space */
229 	base = (*pci_getl_func)(bus, dev, func,
230 	    NVIDIA_CK804_ISA_ANALOG_BAR_OFF);
231 	regs[1].pci_size_low = assigned[1].pci_size_low = PCI_CONF_HDR_SIZE;
232 	assigned[1].pci_phys_hi = regs[1].pci_phys_hi = (PCI_RELOCAT_B |
233 	    PCI_ADDR_IO | devloc | NVIDIA_CK804_ISA_ANALOG_BAR_OFF);
234 	assigned[1].pci_phys_low = regs[1].pci_phys_low =
235 	    base & PCI_BASE_IO_ADDR_M;
236 
237 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "reg",
238 	    (int *)regs, 2 * sizeof (pci_regspec_t) / sizeof (int));
239 	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip,
240 	    "assigned-addresses",
241 	    (int *)assigned, 2 * sizeof (pci_regspec_t) / sizeof (int));
242 }
243