1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 1993, 2010, Oracle and/or its affiliates. All rights reserved. 23 */ 24 /* 25 * Copyright (c) 2010, Intel Corporation. 26 * All rights reserved. 27 */ 28 29 #include <sys/types.h> 30 #include <sys/sysmacros.h> 31 #include <sys/disp.h> 32 #include <sys/promif.h> 33 #include <sys/clock.h> 34 #include <sys/cpuvar.h> 35 #include <sys/stack.h> 36 #include <vm/as.h> 37 #include <vm/hat.h> 38 #include <sys/reboot.h> 39 #include <sys/avintr.h> 40 #include <sys/vtrace.h> 41 #include <sys/proc.h> 42 #include <sys/thread.h> 43 #include <sys/cpupart.h> 44 #include <sys/pset.h> 45 #include <sys/copyops.h> 46 #include <sys/pg.h> 47 #include <sys/disp.h> 48 #include <sys/debug.h> 49 #include <sys/sunddi.h> 50 #include <sys/x86_archext.h> 51 #include <sys/privregs.h> 52 #include <sys/machsystm.h> 53 #include <sys/ontrap.h> 54 #include <sys/bootconf.h> 55 #include <sys/boot_console.h> 56 #include <sys/kdi_machimpl.h> 57 #include <sys/archsystm.h> 58 #include <sys/promif.h> 59 #include <sys/pci_cfgspace.h> 60 #ifdef __xpv 61 #include <sys/hypervisor.h> 62 #else 63 #include <sys/xpv_support.h> 64 #endif 65 66 /* 67 * some globals for patching the result of cpuid 68 * to solve problems w/ creative cpu vendors 69 */ 70 71 extern uint32_t cpuid_feature_ecx_include; 72 extern uint32_t cpuid_feature_ecx_exclude; 73 extern uint32_t cpuid_feature_edx_include; 74 extern uint32_t cpuid_feature_edx_exclude; 75 76 /* 77 * Dummy spl priority masks 78 */ 79 static unsigned char dummy_cpu_pri[MAXIPL + 1] = { 80 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 81 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf 82 }; 83 84 /* 85 * Set console mode 86 */ 87 static void 88 set_console_mode(uint8_t val) 89 { 90 struct bop_regs rp = {0}; 91 92 rp.eax.byte.ah = 0x0; 93 rp.eax.byte.al = val; 94 rp.ebx.word.bx = 0x0; 95 96 BOP_DOINT(bootops, 0x10, &rp); 97 } 98 99 100 /* 101 * Setup routine called right before main(). Interposing this function 102 * before main() allows us to call it in a machine-independent fashion. 103 */ 104 void 105 mlsetup(struct regs *rp) 106 { 107 u_longlong_t prop_value; 108 extern struct classfuncs sys_classfuncs; 109 extern disp_t cpu0_disp; 110 extern char t0stack[]; 111 extern int post_fastreboot; 112 extern int console; 113 extern uint64_t plat_dr_options; 114 115 ASSERT_STACK_ALIGNED(); 116 117 /* 118 * initialize cpu_self 119 */ 120 cpu[0]->cpu_self = cpu[0]; 121 122 #if defined(__xpv) 123 /* 124 * Point at the hypervisor's virtual cpu structure 125 */ 126 cpu[0]->cpu_m.mcpu_vcpu_info = &HYPERVISOR_shared_info->vcpu_info[0]; 127 #endif 128 129 /* 130 * Set up dummy cpu_pri_data values till psm spl code is 131 * installed. This allows splx() to work on amd64. 132 */ 133 134 cpu[0]->cpu_pri_data = dummy_cpu_pri; 135 136 /* 137 * check if we've got special bits to clear or set 138 * when checking cpu features 139 */ 140 141 if (bootprop_getval("cpuid_feature_ecx_include", &prop_value) != 0) 142 cpuid_feature_ecx_include = 0; 143 else 144 cpuid_feature_ecx_include = (uint32_t)prop_value; 145 146 if (bootprop_getval("cpuid_feature_ecx_exclude", &prop_value) != 0) 147 cpuid_feature_ecx_exclude = 0; 148 else 149 cpuid_feature_ecx_exclude = (uint32_t)prop_value; 150 151 if (bootprop_getval("cpuid_feature_edx_include", &prop_value) != 0) 152 cpuid_feature_edx_include = 0; 153 else 154 cpuid_feature_edx_include = (uint32_t)prop_value; 155 156 if (bootprop_getval("cpuid_feature_edx_exclude", &prop_value) != 0) 157 cpuid_feature_edx_exclude = 0; 158 else 159 cpuid_feature_edx_exclude = (uint32_t)prop_value; 160 161 /* 162 * Initialize idt0, gdt0, ldt0_default, ktss0 and dftss. 163 */ 164 init_desctbls(); 165 166 /* 167 * lgrp_init() and possibly cpuid_pass1() need PCI config 168 * space access 169 */ 170 #if defined(__xpv) 171 if (DOMAIN_IS_INITDOMAIN(xen_info)) 172 pci_cfgspace_init(); 173 #else 174 pci_cfgspace_init(); 175 #endif 176 177 /* 178 * The first lightweight pass (pass0) through the cpuid data 179 * was done in locore before mlsetup was called. Do the next 180 * pass in C code. 181 * 182 * The x86_featureset is initialized here based on the capabilities 183 * of the boot CPU. Note that if we choose to support CPUs that have 184 * different feature sets (at which point we would almost certainly 185 * want to set the feature bits to correspond to the feature 186 * minimum) this value may be altered. 187 */ 188 x86_featureset = cpuid_pass1(cpu[0]); 189 190 #if !defined(__xpv) 191 192 if (get_hwenv() == HW_XEN_HVM) 193 xen_hvm_init(); 194 195 /* 196 * Patch the tsc_read routine with appropriate set of instructions, 197 * depending on the processor family and architecure, to read the 198 * time-stamp counter while ensuring no out-of-order execution. 199 * Patch it while the kernel text is still writable. 200 * 201 * Note: tsc_read is not patched for intel processors whose family 202 * is >6 and for amd whose family >f (in case they don't support rdtscp 203 * instruction, unlikely). By default tsc_read will use cpuid for 204 * serialization in such cases. The following code needs to be 205 * revisited if intel processors of family >= f retains the 206 * instruction serialization nature of mfence instruction. 207 * Note: tsc_read is not patched for x86 processors which do 208 * not support "mfence". By default tsc_read will use cpuid for 209 * serialization in such cases. 210 * 211 * The Xen hypervisor does not correctly report whether rdtscp is 212 * supported or not, so we must assume that it is not. 213 */ 214 if (get_hwenv() != HW_XEN_HVM && 215 is_x86_feature(x86_featureset, X86FSET_TSCP)) 216 patch_tsc_read(X86_HAVE_TSCP); 217 else if (cpuid_getvendor(CPU) == X86_VENDOR_AMD && 218 cpuid_getfamily(CPU) <= 0xf && 219 is_x86_feature(x86_featureset, X86FSET_SSE2)) 220 patch_tsc_read(X86_TSC_MFENCE); 221 else if (cpuid_getvendor(CPU) == X86_VENDOR_Intel && 222 cpuid_getfamily(CPU) <= 6 && 223 is_x86_feature(x86_featureset, X86FSET_SSE2)) 224 patch_tsc_read(X86_TSC_LFENCE); 225 226 #endif /* !__xpv */ 227 228 #if defined(__i386) && !defined(__xpv) 229 /* 230 * Some i386 processors do not implement the rdtsc instruction, 231 * or at least they do not implement it correctly. Patch them to 232 * return 0. 233 */ 234 if (!is_x86_feature(x86_featureset, X86FSET_TSC)) 235 patch_tsc_read(X86_NO_TSC); 236 #endif /* __i386 && !__xpv */ 237 238 #if defined(__amd64) && !defined(__xpv) 239 patch_memops(cpuid_getvendor(CPU)); 240 #endif /* __amd64 && !__xpv */ 241 242 #if !defined(__xpv) 243 /* XXPV what, if anything, should be dorked with here under xen? */ 244 245 /* 246 * While we're thinking about the TSC, let's set up %cr4 so that 247 * userland can issue rdtsc, and initialize the TSC_AUX value 248 * (the cpuid) for the rdtscp instruction on appropriately 249 * capable hardware. 250 */ 251 if (is_x86_feature(x86_featureset, X86FSET_TSC)) 252 setcr4(getcr4() & ~CR4_TSD); 253 254 if (is_x86_feature(x86_featureset, X86FSET_TSCP)) 255 (void) wrmsr(MSR_AMD_TSCAUX, 0); 256 257 if (is_x86_feature(x86_featureset, X86FSET_DE)) 258 setcr4(getcr4() | CR4_DE); 259 #endif /* __xpv */ 260 261 /* 262 * initialize t0 263 */ 264 t0.t_stk = (caddr_t)rp - MINFRAME; 265 t0.t_stkbase = t0stack; 266 t0.t_pri = maxclsyspri - 3; 267 t0.t_schedflag = TS_LOAD | TS_DONT_SWAP; 268 t0.t_procp = &p0; 269 t0.t_plockp = &p0lock.pl_lock; 270 t0.t_lwp = &lwp0; 271 t0.t_forw = &t0; 272 t0.t_back = &t0; 273 t0.t_next = &t0; 274 t0.t_prev = &t0; 275 t0.t_cpu = cpu[0]; 276 t0.t_disp_queue = &cpu0_disp; 277 t0.t_bind_cpu = PBIND_NONE; 278 t0.t_bind_pset = PS_NONE; 279 t0.t_bindflag = (uchar_t)default_binding_mode; 280 t0.t_cpupart = &cp_default; 281 t0.t_clfuncs = &sys_classfuncs.thread; 282 t0.t_copyops = NULL; 283 THREAD_ONPROC(&t0, CPU); 284 285 lwp0.lwp_thread = &t0; 286 lwp0.lwp_regs = (void *)rp; 287 lwp0.lwp_procp = &p0; 288 t0.t_tid = p0.p_lwpcnt = p0.p_lwprcnt = p0.p_lwpid = 1; 289 290 p0.p_exec = NULL; 291 p0.p_stat = SRUN; 292 p0.p_flag = SSYS; 293 p0.p_tlist = &t0; 294 p0.p_stksize = 2*PAGESIZE; 295 p0.p_stkpageszc = 0; 296 p0.p_as = &kas; 297 p0.p_lockp = &p0lock; 298 p0.p_brkpageszc = 0; 299 p0.p_t1_lgrpid = LGRP_NONE; 300 p0.p_tr_lgrpid = LGRP_NONE; 301 sigorset(&p0.p_ignore, &ignoredefault); 302 303 CPU->cpu_thread = &t0; 304 bzero(&cpu0_disp, sizeof (disp_t)); 305 CPU->cpu_disp = &cpu0_disp; 306 CPU->cpu_disp->disp_cpu = CPU; 307 CPU->cpu_dispthread = &t0; 308 CPU->cpu_idle_thread = &t0; 309 CPU->cpu_flags = CPU_READY | CPU_RUNNING | CPU_EXISTS | CPU_ENABLE; 310 CPU->cpu_dispatch_pri = t0.t_pri; 311 312 CPU->cpu_id = 0; 313 314 CPU->cpu_pri = 12; /* initial PIL for the boot CPU */ 315 316 /* 317 * The kernel doesn't use LDTs unless a process explicitly requests one. 318 */ 319 p0.p_ldt_desc = null_sdesc; 320 321 /* 322 * Initialize thread/cpu microstate accounting 323 */ 324 init_mstate(&t0, LMS_SYSTEM); 325 init_cpu_mstate(CPU, CMS_SYSTEM); 326 327 /* 328 * Initialize lists of available and active CPUs. 329 */ 330 cpu_list_init(CPU); 331 332 pg_cpu_bootstrap(CPU); 333 334 /* 335 * Now that we have taken over the GDT, IDT and have initialized 336 * active CPU list it's time to inform kmdb if present. 337 */ 338 if (boothowto & RB_DEBUG) 339 kdi_idt_sync(); 340 341 /* 342 * Explicitly set console to text mode (0x3) if this is a boot 343 * post Fast Reboot, and the console is set to CONS_SCREEN_TEXT. 344 */ 345 if (post_fastreboot && console == CONS_SCREEN_TEXT) 346 set_console_mode(0x3); 347 348 /* 349 * If requested (boot -d) drop into kmdb. 350 * 351 * This must be done after cpu_list_init() on the 64-bit kernel 352 * since taking a trap requires that we re-compute gsbase based 353 * on the cpu list. 354 */ 355 if (boothowto & RB_DEBUGENTER) 356 kmdb_enter(); 357 358 cpu_vm_data_init(CPU); 359 360 rp->r_fp = 0; /* terminate kernel stack traces! */ 361 362 prom_init("kernel", (void *)NULL); 363 364 /* User-set option overrides firmware value. */ 365 if (bootprop_getval(PLAT_DR_OPTIONS_NAME, &prop_value) == 0) { 366 plat_dr_options = (uint64_t)prop_value; 367 } 368 #if defined(__xpv) 369 /* No support of DR operations on xpv */ 370 plat_dr_options = 0; 371 #else /* __xpv */ 372 /* Flag PLAT_DR_FEATURE_ENABLED should only be set by DR driver. */ 373 plat_dr_options &= ~PLAT_DR_FEATURE_ENABLED; 374 #ifndef __amd64 375 /* Only enable CPU/memory DR on 64 bits kernel. */ 376 plat_dr_options &= ~PLAT_DR_FEATURE_MEMORY; 377 plat_dr_options &= ~PLAT_DR_FEATURE_CPU; 378 #endif /* __amd64 */ 379 #endif /* __xpv */ 380 381 /* 382 * Get value of "plat_dr_physmax" boot option. 383 * It overrides values calculated from MSCT or SRAT table. 384 */ 385 if (bootprop_getval(PLAT_DR_PHYSMAX_NAME, &prop_value) == 0) { 386 plat_dr_physmax = ((uint64_t)prop_value) >> PAGESHIFT; 387 } 388 389 /* Get value of boot_ncpus. */ 390 if (bootprop_getval(BOOT_NCPUS_NAME, &prop_value) != 0) { 391 boot_ncpus = NCPU; 392 } else { 393 boot_ncpus = (int)prop_value; 394 if (boot_ncpus <= 0 || boot_ncpus > NCPU) 395 boot_ncpus = NCPU; 396 } 397 398 /* 399 * Set max_ncpus and boot_max_ncpus to boot_ncpus if platform doesn't 400 * support CPU DR operations. 401 */ 402 if (plat_dr_support_cpu() == 0) { 403 max_ncpus = boot_max_ncpus = boot_ncpus; 404 } else { 405 if (bootprop_getval(PLAT_MAX_NCPUS_NAME, &prop_value) != 0) { 406 max_ncpus = NCPU; 407 } else { 408 max_ncpus = (int)prop_value; 409 if (max_ncpus <= 0 || max_ncpus > NCPU) { 410 max_ncpus = NCPU; 411 } 412 if (boot_ncpus > max_ncpus) { 413 boot_ncpus = max_ncpus; 414 } 415 } 416 417 if (bootprop_getval(BOOT_MAX_NCPUS_NAME, &prop_value) != 0) { 418 boot_max_ncpus = boot_ncpus; 419 } else { 420 boot_max_ncpus = (int)prop_value; 421 if (boot_max_ncpus <= 0 || boot_max_ncpus > NCPU) { 422 boot_max_ncpus = boot_ncpus; 423 } else if (boot_max_ncpus > max_ncpus) { 424 boot_max_ncpus = max_ncpus; 425 } 426 } 427 } 428 429 /* 430 * Initialize the lgrp framework 431 */ 432 lgrp_init(LGRP_INIT_STAGE1); 433 434 if (boothowto & RB_HALT) { 435 prom_printf("unix: kernel halted by -h flag\n"); 436 prom_enter_mon(); 437 } 438 439 ASSERT_STACK_ALIGNED(); 440 441 /* 442 * Fill out cpu_ucode_info. Update microcode if necessary. 443 */ 444 ucode_check(CPU); 445 446 if (workaround_errata(CPU) != 0) 447 panic("critical workaround(s) missing for boot cpu"); 448 } 449 450 451 void 452 mach_modpath(char *path, const char *filename) 453 { 454 /* 455 * Construct the directory path from the filename. 456 */ 457 458 int len; 459 char *p; 460 const char isastr[] = "/amd64"; 461 size_t isalen = strlen(isastr); 462 463 if ((p = strrchr(filename, '/')) == NULL) 464 return; 465 466 while (p > filename && *(p - 1) == '/') 467 p--; /* remove trailing '/' characters */ 468 if (p == filename) 469 p++; /* so "/" -is- the modpath in this case */ 470 471 /* 472 * Remove optional isa-dependent directory name - the module 473 * subsystem will put this back again (!) 474 */ 475 len = p - filename; 476 if (len > isalen && 477 strncmp(&filename[len - isalen], isastr, isalen) == 0) 478 p -= isalen; 479 480 /* 481 * "/platform/mumblefrotz" + " " + MOD_DEFPATH 482 */ 483 len += (p - filename) + 1 + strlen(MOD_DEFPATH) + 1; 484 (void) strncpy(path, filename, p - filename); 485 } 486