xref: /titanic_41/usr/src/uts/i86pc/io/pciex/npe_misc.c (revision a7df97bafe5a886e6ddb3fe8170b2d547cd3b029)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  *	Library file that has miscellaneous support for npe(7d)
29  */
30 
31 #include <sys/conf.h>
32 #include <sys/pci.h>
33 #include <sys/sunndi.h>
34 #include <sys/acpi/acpi.h>
35 #include <sys/acpi/acpi_pci.h>
36 #include <sys/acpica.h>
37 #include <sys/pci_cap.h>
38 #include <sys/pcie_impl.h>
39 #include <sys/x86_archext.h>
40 #include <io/pciex/pcie_nvidia.h>
41 #include <io/pciex/pcie_nb5000.h>
42 
43 /*
44  * Prototype declaration
45  */
46 void	npe_query_acpi_mcfg(dev_info_t *dip);
47 void	npe_ck804_fix_aer_ptr(ddi_acc_handle_t cfg_hdl);
48 int	npe_disable_empty_bridges_workaround(dev_info_t *child);
49 void	npe_nvidia_error_mask(ddi_acc_handle_t cfg_hdl);
50 void	npe_intel_error_mask(ddi_acc_handle_t cfg_hdl);
51 boolean_t npe_is_child_pci(dev_info_t *dip);
52 
53 /*
54  * Default ecfga base address
55  */
56 int64_t npe_default_ecfga_base = 0xE0000000;
57 
58 extern uint32_t	npe_aer_uce_mask;
59 extern boolean_t pcie_full_scan;
60 
61 /* AMD's northbridges vendor-id and device-ids */
62 #define	AMD_NTBRDIGE_VID		0x1022	/* AMD vendor-id */
63 #define	AMD_HT_NTBRIDGE_DID		0x1100	/* HT Configuration */
64 #define	AMD_AM_NTBRIDGE_DID		0x1101	/* Address Map */
65 #define	AMD_DC_NTBRIDGE_DID		0x1102	/* DRAM Controller */
66 #define	AMD_MC_NTBRIDGE_DID		0x1103	/* Misc Controller */
67 #define	AMD_K10_NTBRIDGE_DID_0		0x1200
68 #define	AMD_K10_NTBRIDGE_DID_1		0x1201
69 #define	AMD_K10_NTBRIDGE_DID_2		0x1202
70 #define	AMD_K10_NTBRIDGE_DID_3		0x1203
71 #define	AMD_K10_NTBRIDGE_DID_4		0x1204
72 
73 /*
74  * Check if the given device is an AMD northbridge
75  */
76 #define	IS_BAD_AMD_NTBRIDGE(vid, did) \
77 	    (((vid) == AMD_NTBRDIGE_VID) && \
78 	    (((did) == AMD_HT_NTBRIDGE_DID) || \
79 	    ((did) == AMD_AM_NTBRIDGE_DID) || \
80 	    ((did) == AMD_DC_NTBRIDGE_DID) || \
81 	    ((did) == AMD_MC_NTBRIDGE_DID)))
82 
83 #define	IS_K10_AMD_NTBRIDGE(vid, did) \
84 	    (((vid) == AMD_NTBRDIGE_VID) && \
85 	    (((did) == AMD_K10_NTBRIDGE_DID_0) || \
86 	    ((did) == AMD_K10_NTBRIDGE_DID_1) || \
87 	    ((did) == AMD_K10_NTBRIDGE_DID_2) || \
88 	    ((did) == AMD_K10_NTBRIDGE_DID_3) || \
89 	    ((did) == AMD_K10_NTBRIDGE_DID_4)))
90 
91 #define	MSR_AMD_NB_MMIO_CFG_BADDR	0xc0010058
92 #define	AMD_MMIO_CFG_BADDR_ADDR_MASK	0xFFFFFFF00000ULL
93 #define	AMD_MMIO_CFG_BADDR_ENA_MASK	0x000000000001ULL
94 #define	AMD_MMIO_CFG_BADDR_ENA_ON	0x000000000001ULL
95 #define	AMD_MMIO_CFG_BADDR_ENA_OFF	0x000000000000ULL
96 
97 
98 /*
99  * Query the MCFG table using ACPI.  If MCFG is found, setup the
100  * 'ecfg' property accordingly.  Otherwise, set the values
101  * to the default values.
102  */
103 void
104 npe_query_acpi_mcfg(dev_info_t *dip)
105 {
106 	MCFG_TABLE *mcfgp;
107 	CFG_BASE_ADDR_ALLOC *cfg_baap;
108 	char *cfg_baa_endp;
109 	int64_t ecfginfo[4];
110 	int ecfg_found = 0;
111 
112 	/* Query the MCFG table using ACPI */
113 	if (AcpiGetTable(ACPI_SIG_MCFG, 1,
114 	    (ACPI_TABLE_HEADER **)&mcfgp) == AE_OK) {
115 
116 		cfg_baap = (CFG_BASE_ADDR_ALLOC *)mcfgp->CfgBaseAddrAllocList;
117 		cfg_baa_endp = ((char *)mcfgp) + mcfgp->Length;
118 
119 		while ((char *)cfg_baap < cfg_baa_endp) {
120 			if (cfg_baap->base_addr != (uint64_t)0 &&
121 			    cfg_baap->segment == 0) {
122 				/*
123 				 * Set up the 'ecfg' property to hold
124 				 * base_addr, segment, and first/last bus.
125 				 * We only do the first entry that maps
126 				 * segment 0; nonzero segments are not yet
127 				 * known, or handled.  If they appear,
128 				 * we'll need to figure out which bus node
129 				 * should have which entry by examining the
130 				 * ACPI _SEG method on each bus node.
131 				 */
132 				ecfginfo[0] = cfg_baap->base_addr;
133 				ecfginfo[1] = cfg_baap->segment;
134 				ecfginfo[2] = cfg_baap->start_bno;
135 				ecfginfo[3] = cfg_baap->end_bno;
136 				(void) ndi_prop_update_int64_array(
137 				    DDI_DEV_T_NONE, dip, "ecfg",
138 				    ecfginfo, 4);
139 				ecfg_found = 1;
140 				break;
141 			}
142 			cfg_baap++;
143 		}
144 	}
145 	if (ecfg_found)
146 		return;
147 	/*
148 	 * If MCFG is not found or ecfga_base is not found in MCFG table,
149 	 * set the property to the default values.
150 	 */
151 	ecfginfo[0] = npe_default_ecfga_base;
152 	ecfginfo[1] = 0;		/* segment 0 */
153 	ecfginfo[2] = 0;		/* first bus 0 */
154 	ecfginfo[3] = 0xff;		/* last bus ff */
155 	(void) ndi_prop_update_int64_array(DDI_DEV_T_NONE, dip,
156 	    "ecfg", ecfginfo, 4);
157 }
158 
159 
160 /*
161  * Enable reporting of AER capability next pointer.
162  * This needs to be done only for CK8-04 devices
163  * by setting NV_XVR_VEND_CYA1 (offset 0xf40) bit 13
164  * NOTE: BIOS is disabling this, it needs to be enabled temporarily
165  */
166 void
167 npe_ck804_fix_aer_ptr(ddi_acc_handle_t cfg_hdl)
168 {
169 	ushort_t cya1;
170 
171 	if ((pci_config_get16(cfg_hdl, PCI_CONF_VENID) == NVIDIA_VENDOR_ID) &&
172 	    (pci_config_get16(cfg_hdl, PCI_CONF_DEVID) ==
173 	    NVIDIA_CK804_DEVICE_ID) &&
174 	    (pci_config_get8(cfg_hdl, PCI_CONF_REVID) >=
175 	    NVIDIA_CK804_AER_VALID_REVID)) {
176 		cya1 =  pci_config_get16(cfg_hdl, NVIDIA_CK804_VEND_CYA1_OFF);
177 		if (!(cya1 & ~NVIDIA_CK804_VEND_CYA1_ERPT_MASK))
178 			(void) pci_config_put16(cfg_hdl,
179 			    NVIDIA_CK804_VEND_CYA1_OFF,
180 			    cya1 | NVIDIA_CK804_VEND_CYA1_ERPT_VAL);
181 	}
182 }
183 
184 /*
185  * If the bridge is empty, disable it
186  */
187 int
188 npe_disable_empty_bridges_workaround(dev_info_t *child)
189 {
190 	/*
191 	 * Do not bind drivers to empty bridges.
192 	 * Fail above, if the bridge is found to be hotplug capable
193 	 */
194 	if (ddi_driver_major(child) == ddi_name_to_major("pcieb") &&
195 	    ddi_get_child(child) == NULL &&
196 	    ddi_prop_get_int(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS,
197 	    "pci-hotplug-type", INBAND_HPC_NONE) == INBAND_HPC_NONE)
198 		return (1);
199 
200 	return (0);
201 }
202 
203 void
204 npe_nvidia_error_mask(ddi_acc_handle_t cfg_hdl) {
205 	uint32_t regs;
206 	uint16_t vendor_id = pci_config_get16(cfg_hdl, PCI_CONF_VENID);
207 	uint16_t dev_id = pci_config_get16(cfg_hdl, PCI_CONF_DEVID);
208 
209 	if ((vendor_id == NVIDIA_VENDOR_ID) && NVIDIA_PCIE_RC_DEV_ID(dev_id)) {
210 		/* Disable ECRC for all devices */
211 		regs = pcie_get_aer_uce_mask() | npe_aer_uce_mask |
212 		    PCIE_AER_UCE_ECRC;
213 		pcie_set_aer_uce_mask(regs);
214 
215 		/*
216 		 * Turn full scan on since the Error Source ID register may not
217 		 * have the correct ID.
218 		 */
219 		pcie_full_scan = B_TRUE;
220 	}
221 }
222 
223 void
224 npe_intel_error_mask(ddi_acc_handle_t cfg_hdl) {
225 	uint32_t regs;
226 	uint16_t vendor_id = pci_config_get16(cfg_hdl, PCI_CONF_VENID);
227 
228 	if (vendor_id == INTEL_VENDOR_ID) {
229 		/*
230 		 * Due to an errata in Intel's ESB2 southbridge, all ECRCs
231 		 * generation/checking need to be disabled.  There is a
232 		 * workaround by setting a proprietary bit in the ESB2, but it
233 		 * is not well documented or understood.  If that bit is set in
234 		 * the future, then ECRC generation/checking should be enabled
235 		 * again.
236 		 *
237 		 * Disable ECRC generation/checking by masking ECRC in the AER
238 		 * UE Mask.  The pcie misc module would then automatically
239 		 * disable ECRC generation/checking in the AER Control register.
240 		 */
241 		regs = pcie_get_aer_uce_mask() | PCIE_AER_UCE_ECRC;
242 		pcie_set_aer_uce_mask(regs);
243 	}
244 }
245 
246 /*
247  * Check's if this child is a PCI device.
248  * Child is a PCI device if:
249  * parent has a dev_type of "pci"
250  * -and-
251  * child does not have a dev_type of "pciex"
252  *
253  * If the parent is not of dev_type "pci", then assume it is "pciex" and all
254  * children should support using PCIe style MMCFG access.
255  *
256  * If parent's dev_type is "pci" and child is "pciex", then also enable using
257  * PCIe style MMCFG access.  This covers the case where NPE is "pci" and a PCIe
258  * RP is beneath.
259  */
260 boolean_t
261 npe_child_is_pci(dev_info_t *dip) {
262 	char *dev_type;
263 	boolean_t parent_is_pci, child_is_pciex;
264 
265 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_get_parent(dip),
266 	    DDI_PROP_DONTPASS, "device_type", &dev_type) ==
267 	    DDI_PROP_SUCCESS) {
268 		parent_is_pci = (strcmp(dev_type, "pci") == 0);
269 		ddi_prop_free(dev_type);
270 	} else {
271 		parent_is_pci = B_FALSE;
272 	}
273 
274 	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
275 	    "device_type", &dev_type) == DDI_PROP_SUCCESS) {
276 		child_is_pciex = (strcmp(dev_type, "pciex") == 0);
277 		ddi_prop_free(dev_type);
278 	} else {
279 		child_is_pciex = B_FALSE;
280 	}
281 
282 	return (parent_is_pci && !child_is_pciex);
283 }
284 
285 /*
286  * Checks to see if MMCFG is supported.
287  * Returns: TRUE if MMCFG is supported, FALSE if not.
288  *
289  * If a device is attached to a parent whose "dev_type" is "pciex",
290  * the device will support MMCFG access.  Otherwise, use legacy IOCFG access.
291  *
292  * Enable Legacy PCI config space access for AMD K8 north bridges.
293  *	Host bridge: AMD HyperTransport Technology Configuration
294  *	Host bridge: AMD Address Map
295  *	Host bridge: AMD DRAM Controller
296  *	Host bridge: AMD Miscellaneous Control
297  * These devices do not support MMCFG access.
298  */
299 boolean_t
300 npe_is_mmcfg_supported(dev_info_t *dip)
301 {
302 	int vendor_id, device_id;
303 
304 	vendor_id = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
305 	    "vendor-id", -1);
306 	device_id = ddi_prop_get_int(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
307 	    "device-id", -1);
308 
309 	return !(npe_child_is_pci(dip) ||
310 	    IS_BAD_AMD_NTBRIDGE(vendor_id, device_id));
311 }
312 
313 int
314 npe_enable_htmsi(ddi_acc_handle_t cfg_hdl)
315 {
316 	uint16_t ptr;
317 	uint16_t reg;
318 
319 	if (pci_htcap_locate(cfg_hdl, PCI_HTCAP_TYPE_MASK,
320 	    PCI_HTCAP_MSIMAP_TYPE, &ptr) != DDI_SUCCESS)
321 		return (DDI_FAILURE);
322 
323 	reg = pci_config_get16(cfg_hdl, ptr + PCI_CAP_ID_REGS_OFF);
324 	reg |= PCI_HTCAP_MSIMAP_ENABLE;
325 
326 	pci_config_put16(cfg_hdl, ptr + PCI_CAP_ID_REGS_OFF, reg);
327 	return (DDI_SUCCESS);
328 }
329 
330 void
331 npe_enable_htmsi_children(dev_info_t *dip)
332 {
333 	dev_info_t *cdip = ddi_get_child(dip);
334 	ddi_acc_handle_t cfg_hdl;
335 
336 	for (; cdip != NULL; cdip = ddi_get_next_sibling(cdip)) {
337 		if (pci_config_setup(cdip, &cfg_hdl) != DDI_SUCCESS) {
338 			cmn_err(CE_NOTE, "!npe_enable_htmsi_children: "
339 			    "pci_config_setup failed for %s",
340 			    ddi_node_name(cdip));
341 		}
342 
343 		(void) npe_enable_htmsi(cfg_hdl);
344 		pci_config_teardown(&cfg_hdl);
345 	}
346 }
347 
348 /*
349  * save config regs for HyperTransport devices without drivers of classes:
350  * memory controller and hostbridge
351  */
352 int
353 npe_save_htconfig_children(dev_info_t *dip)
354 {
355 	dev_info_t *cdip = ddi_get_child(dip);
356 	ddi_acc_handle_t cfg_hdl;
357 	uint16_t ptr;
358 	int rval = DDI_SUCCESS;
359 	uint8_t cl, scl;
360 
361 	for (; cdip != NULL; cdip = ddi_get_next_sibling(cdip)) {
362 		if (ddi_driver_major(cdip) != DDI_MAJOR_T_NONE)
363 			continue;
364 
365 		if (pci_config_setup(cdip, &cfg_hdl) != DDI_SUCCESS)
366 			return (DDI_FAILURE);
367 
368 		cl = pci_config_get8(cfg_hdl, PCI_CONF_BASCLASS);
369 		scl = pci_config_get8(cfg_hdl, PCI_CONF_SUBCLASS);
370 
371 		if (((cl == PCI_CLASS_MEM && scl == PCI_MEM_RAM) ||
372 		    (cl == PCI_CLASS_BRIDGE && scl == PCI_BRIDGE_HOST)) &&
373 		    pci_htcap_locate(cfg_hdl, 0, 0, &ptr) == DDI_SUCCESS) {
374 
375 			if (pci_save_config_regs(cdip) != DDI_SUCCESS) {
376 				cmn_err(CE_WARN, "Failed to save HT config "
377 				    "regs for %s\n", ddi_node_name(cdip));
378 				rval = DDI_FAILURE;
379 
380 			} else if (ddi_prop_update_int(DDI_DEV_T_NONE, cdip,
381 			    "htconfig-saved", 1) != DDI_SUCCESS) {
382 				cmn_err(CE_WARN, "Failed to set htconfig-saved "
383 				    "property for %s\n", ddi_node_name(cdip));
384 				rval = DDI_FAILURE;
385 			}
386 		}
387 
388 		pci_config_teardown(&cfg_hdl);
389 	}
390 
391 	return (rval);
392 }
393 
394 int
395 npe_restore_htconfig_children(dev_info_t *dip)
396 {
397 	dev_info_t *cdip = ddi_get_child(dip);
398 	int rval = DDI_SUCCESS;
399 
400 	for (; cdip != NULL; cdip = ddi_get_next_sibling(cdip)) {
401 		if (ddi_prop_get_int(DDI_DEV_T_ANY, cdip, DDI_PROP_DONTPASS,
402 		    "htconfig-saved", 0) == 0)
403 			continue;
404 
405 		if (pci_restore_config_regs(cdip) != DDI_SUCCESS) {
406 			cmn_err(CE_WARN, "Failed to restore HT config "
407 			    "regs for %s\n", ddi_node_name(cdip));
408 			rval = DDI_FAILURE;
409 		}
410 	}
411 
412 	return (rval);
413 }
414