xref: /titanic_41/usr/src/uts/i86pc/io/isa.c (revision bd5222b6bd017872d8b0f84855a82a20fc5ce74d)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2014 Garrett D'Amore <garrett@damore.org>
 * Copyright (c) 2012 Gary Mills
 * Copyright (c) 1992, 2010, Oracle and/or its affiliates. All rights reserved.
 */

/*
 *	ISA bus nexus driver
 */

#include <sys/types.h>
#include <sys/cmn_err.h>
#include <sys/conf.h>
#include <sys/modctl.h>
#include <sys/autoconf.h>
#include <sys/errno.h>
#include <sys/debug.h>
#include <sys/kmem.h>
#include <sys/psm.h>
#include <sys/ddidmareq.h>
#include <sys/ddi_impldefs.h>
#include <sys/ddi_subrdefs.h>
#include <sys/dma_engine.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>
#include <sys/sunndi.h>
#include <sys/acpi/acpi_enum.h>
#include <sys/mach_intr.h>
#include <sys/pci.h>
#include <sys/note.h>
#include <sys/boot_console.h>
#include <sys/apic.h>
#if defined(__xpv)
#include <sys/hypervisor.h>
#include <sys/evtchn_impl.h>

extern int console_hypervisor_dev_type(int *);
#endif


extern int pseudo_isa;
extern int isa_resource_setup(void);
extern int (*psm_intr_ops)(dev_info_t *, ddi_intr_handle_impl_t *,
    psm_intr_op_t, int *);
extern void pci_register_isa_resources(int, uint32_t, uint32_t);
static void isa_enumerate(int);
static void enumerate_BIOS_serial(dev_info_t *);
static void adjust_prtsz(dev_info_t *isa_dip);
static void isa_create_ranges_prop(dev_info_t *);

#define	USED_RESOURCES	"used-resources"

/*
 * The following typedef is used to represent an entry in the "ranges"
 * property of a pci-isa bridge device node.
 */
typedef struct {
	uint32_t child_high;
	uint32_t child_low;
	uint32_t parent_high;
	uint32_t parent_mid;
	uint32_t parent_low;
	uint32_t size;
} pib_ranges_t;

typedef struct {
	uint32_t base;
	uint32_t len;
} used_ranges_t;

#define	USED_CELL_SIZE	2	/* 1 byte addr, 1 byte size */
#define	ISA_ADDR_IO	1	/* IO address space */
#define	ISA_ADDR_MEM	0	/* memory adress space */

/*
 * #define ISA_DEBUG 1
 */

#define	num_BIOS_serial	4	/* number of BIOS serial ports to look at */
#define	min_BIOS_serial	2	/* minimum number of BIOS serial ports */
#define	COM_ISR		2	/* 16550 intr status register */
#define	COM_SCR		7	/* 16550 scratch register */

/*
 * For serial ports not enumerated by ACPI, and parallel ports with
 * illegal size. Typically, a system can have as many as 4 serial
 * ports and 3 parallel ports.
 */
#define	MAX_EXTRA_RESOURCE	7
static struct regspec isa_extra_resource[MAX_EXTRA_RESOURCE];
static int isa_extra_count = 0;

/* Register definitions for COM1 to COM4. */
static struct regspec asy_regs[] = {
	{1, 0x3f8, 0x8},
	{1, 0x2f8, 0x8},
	{1, 0x3e8, 0x8},
	{1, 0x2e8, 0x8}
};

/* Serial port interrupt vectors for COM1 to COM4. */
static int asy_intrs[] = {0x4, 0x3, 0x4, 0x3};
/* Bitfield indicating which interrupts are overridden by eeprom config */
static uchar_t asy_intr_override = 0;

/*
 *      Local data
 */

static ddi_dma_attr_t ISA_dma_attr = {
	DMA_ATTR_V0,
	(unsigned long long)0,
	(unsigned long long)0x00ffffff,
	0x0000ffff,
	1,
	1,
	1,
	(unsigned long long)0xffffffff,
	(unsigned long long)0x0000ffff,
	1,
	1,
	0
};


/*
 * Config information
 */

static int
isa_bus_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp,
    off_t offset, off_t len, caddr_t *vaddrp);

static int
isa_dma_allochdl(dev_info_t *, dev_info_t *, ddi_dma_attr_t *,
    int (*waitfp)(caddr_t), caddr_t arg, ddi_dma_handle_t *);

static int
isa_dma_mctl(dev_info_t *, dev_info_t *, ddi_dma_handle_t, enum ddi_dma_ctlops,
    off_t *, size_t *, caddr_t *, uint_t);

static int
isa_ctlops(dev_info_t *, dev_info_t *, ddi_ctl_enum_t, void *, void *);

static int
isa_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t intr_op,
    ddi_intr_handle_impl_t *hdlp, void *result);
static int isa_alloc_intr_fixed(dev_info_t *, ddi_intr_handle_impl_t *, void *);
static int isa_free_intr_fixed(dev_info_t *, ddi_intr_handle_impl_t *);

struct bus_ops isa_bus_ops = {
	BUSO_REV,
	isa_bus_map,
	NULL,
	NULL,
	NULL,
	i_ddi_map_fault,
	NULL,
	isa_dma_allochdl,
	ddi_dma_freehdl,
	ddi_dma_bindhdl,
	ddi_dma_unbindhdl,
	ddi_dma_flush,
	ddi_dma_win,
	isa_dma_mctl,
	isa_ctlops,
	ddi_bus_prop_op,
	NULL,		/* (*bus_get_eventcookie)();	*/
	NULL,		/* (*bus_add_eventcall)();	*/
	NULL,		/* (*bus_remove_eventcall)();	*/
	NULL,		/* (*bus_post_event)();		*/
	NULL,		/* (*bus_intr_ctl)(); */
	NULL,		/* (*bus_config)(); */
	NULL,		/* (*bus_unconfig)(); */
	NULL,		/* (*bus_fm_init)(); */
	NULL,		/* (*bus_fm_fini)(); */
	NULL,		/* (*bus_fm_access_enter)(); */
	NULL,		/* (*bus_fm_access_exit)(); */
	NULL,		/* (*bus_power)(); */
	isa_intr_ops	/* (*bus_intr_op)(); */
};


static int isa_attach(dev_info_t *devi, ddi_attach_cmd_t cmd);

/*
 * Internal isa ctlops support routines
 */
static int isa_initchild(dev_info_t *child);

struct dev_ops isa_ops = {
	DEVO_REV,		/* devo_rev, */
	0,			/* refcnt  */
	ddi_no_info,		/* info */
	nulldev,		/* identify */
	nulldev,		/* probe */
	isa_attach,		/* attach */
	nulldev,		/* detach */
	nodev,			/* reset */
	(struct cb_ops *)0,	/* driver operations */
	&isa_bus_ops,		/* bus operations */
	NULL,			/* power */
	ddi_quiesce_not_needed,		/* quiesce */
};

/*
 * Module linkage information for the kernel.
 */

static struct modldrv modldrv = {
	&mod_driverops, /* Type of module.  This is ISA bus driver */
	"isa nexus driver for 'ISA'",
	&isa_ops,	/* driver ops */
};

static struct modlinkage modlinkage = {
	MODREV_1,
	&modldrv,
	NULL
};

int
_init(void)
{
	int	err;
	char tty_irq_param[9] = "ttyX-irq";
	char *tty_irq;
	int i;

	if ((err = mod_install(&modlinkage)) != 0)
		return (err);

	/* Check if any tty irqs are overridden by eeprom config */
	for (i = 0; i < num_BIOS_serial; i++) {
		tty_irq_param[3] = 'a' + i;
		if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(),
		    DDI_PROP_DONTPASS, tty_irq_param, &tty_irq)
		    == DDI_PROP_SUCCESS) {
			long data;

			if (ddi_strtol(tty_irq, NULL, 0, &data) == 0) {
				asy_intrs[i] = (int)data;
				asy_intr_override |= 1<<i;
			}

			ddi_prop_free(tty_irq);
		}
	}

	impl_bus_add_probe(isa_enumerate);
	return (0);
}

int
_fini(void)
{
	int	err;

	impl_bus_delete_probe(isa_enumerate);

	if ((err = mod_remove(&modlinkage)) != 0)
		return (err);

	return (0);
}

int
_info(struct modinfo *modinfop)
{
	return (mod_info(&modlinkage, modinfop));
}

static int
isa_attach(dev_info_t *devi, ddi_attach_cmd_t cmd)
{
	int rval;

#if defined(__xpv)
	/*
	 * don't allow isa to attach in domU. this can happen if someone sets
	 * the console wrong, etc. ISA devices assume the H/W is there and
	 * will cause the domU to panic.
	 */
	if (!DOMAIN_IS_INITDOMAIN(xen_info)) {
		return (DDI_FAILURE);
	}
#endif

	switch (cmd) {
	case DDI_ATTACH:
		break;
	case DDI_RESUME:
		return (DDI_SUCCESS);
	default:
		return (DDI_FAILURE);
	}

	if ((rval = i_dmae_init(devi)) == DDI_SUCCESS)
		ddi_report_dev(devi);

	return (rval);
}

#define	SET_RNGS(rng_p, used_p, ctyp, ptyp) do {			\
		(rng_p)->child_high = (ctyp);				\
		(rng_p)->child_low = (rng_p)->parent_low = (used_p)->base; \
		(rng_p)->parent_high = (ptyp);				\
		(rng_p)->parent_mid = 0;				\
		(rng_p)->size = (used_p)->len;				\
		_NOTE(CONSTCOND) } while (0)
static uint_t
isa_used_to_ranges(int ctype, int *array, uint_t size, pib_ranges_t *ranges)
{
	used_ranges_t *used_p;
	pib_ranges_t *rng_p = ranges;
	uint_t	i, ptype;

	ptype = (ctype == ISA_ADDR_IO) ? PCI_ADDR_IO : PCI_ADDR_MEM32;
	ptype |= PCI_REG_REL_M;
	size /= USED_CELL_SIZE;
	used_p = (used_ranges_t *)array;
	SET_RNGS(rng_p, used_p, ctype, ptype);
	for (i = 1, used_p++; i < size; i++, used_p++) {
		/* merge ranges record if applicable */
		if (rng_p->child_low + rng_p->size == used_p->base)
			rng_p->size += used_p->len;
		else {
			rng_p++;
			SET_RNGS(rng_p, used_p, ctype, ptype);
		}
	}
	return (rng_p - ranges + 1);
}

void
isa_remove_res_from_pci(int type, int *array, uint_t size)
{
	int i;
	used_ranges_t *used_p;

	size /= USED_CELL_SIZE;
	used_p = (used_ranges_t *)array;
	for (i = 0; i < size; i++, used_p++)
		pci_register_isa_resources(type, used_p->base, used_p->len);
}

static void
isa_create_ranges_prop(dev_info_t *dip)
{
	dev_info_t *used;
	int *ioarray, *memarray, status;
	uint_t nio = 0, nmem = 0, nrng = 0, n;
	pib_ranges_t *ranges;

	used = ddi_find_devinfo(USED_RESOURCES, -1, 0);
	if (used == NULL) {
		cmn_err(CE_WARN, "Failed to find used-resources <%s>\n",
		    ddi_get_name(dip));
		return;
	}
	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, used,
	    DDI_PROP_DONTPASS, "io-space", &ioarray, &nio);
	if (status != DDI_PROP_SUCCESS && status != DDI_PROP_NOT_FOUND) {
		cmn_err(CE_WARN, "io-space property failure for %s (%x)\n",
		    ddi_get_name(used), status);
		return;
	}
	status = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, used,
	    DDI_PROP_DONTPASS, "device-memory", &memarray, &nmem);
	if (status != DDI_PROP_SUCCESS && status != DDI_PROP_NOT_FOUND) {
		cmn_err(CE_WARN, "device-memory property failure for %s (%x)\n",
		    ddi_get_name(used), status);
		return;
	}
	n = (nio + nmem) / USED_CELL_SIZE;
	ranges =  (pib_ranges_t *)kmem_zalloc(sizeof (pib_ranges_t) * n,
	    KM_SLEEP);

	if (nio != 0) {
		nrng = isa_used_to_ranges(ISA_ADDR_IO, ioarray, nio, ranges);
		isa_remove_res_from_pci(ISA_ADDR_IO, ioarray, nio);
		ddi_prop_free(ioarray);
	}
	if (nmem != 0) {
		nrng += isa_used_to_ranges(ISA_ADDR_MEM, memarray, nmem,
		    ranges + nrng);
		isa_remove_res_from_pci(ISA_ADDR_MEM, memarray, nmem);
		ddi_prop_free(memarray);
	}

	if (!pseudo_isa)
		(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, dip, "ranges",
		    (int *)ranges, nrng * sizeof (pib_ranges_t) / sizeof (int));
	kmem_free(ranges, sizeof (pib_ranges_t) * n);
}

/*ARGSUSED*/
static int
isa_apply_range(dev_info_t *dip, struct regspec *isa_reg_p,
    pci_regspec_t *pci_reg_p)
{
	pib_ranges_t *ranges, *rng_p;
	int len, i, offset, nrange;

	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
	    "ranges", (caddr_t)&ranges, &len) != DDI_SUCCESS) {
		cmn_err(CE_WARN, "Can't get %s ranges property",
		    ddi_get_name(dip));
		return (DDI_ME_REGSPEC_RANGE);
	}
	nrange = len / sizeof (pib_ranges_t);
	rng_p = ranges;
	for (i = 0; i < nrange; i++, rng_p++) {
		/* Check for correct space */
		if (isa_reg_p->regspec_bustype != rng_p->child_high)
			continue;

		/* Detect whether request entirely fits within a range */
		if (isa_reg_p->regspec_addr < rng_p->child_low)
			continue;
		if ((isa_reg_p->regspec_addr + isa_reg_p->regspec_size - 1) >
		    (rng_p->child_low + rng_p->size - 1))
			continue;

		offset = isa_reg_p->regspec_addr - rng_p->child_low;

		pci_reg_p->pci_phys_hi = rng_p->parent_high;
		pci_reg_p->pci_phys_mid = 0;
		pci_reg_p->pci_phys_low = rng_p->parent_low + offset;
		pci_reg_p->pci_size_hi = 0;
		pci_reg_p->pci_size_low = isa_reg_p->regspec_size;

		break;
	}
	kmem_free(ranges, len);

	if (i < nrange)
		return (DDI_SUCCESS);

	/*
	 * Check extra resource range specially for serial and parallel
	 * devices, which are treated differently from all other ISA
	 * devices. On some machines, serial ports are not enumerated
	 * by ACPI but by BIOS, with io base addresses noted in legacy
	 * BIOS data area. Parallel port on some machines comes with
	 * illegal size.
	 */
	if (isa_reg_p->regspec_bustype != ISA_ADDR_IO) {
		cmn_err(CE_WARN, "Bus type not ISA I/O\n");
		return (DDI_ME_REGSPEC_RANGE);
	}

	for (i = 0; i < isa_extra_count; i++) {
		struct regspec *reg_p = &isa_extra_resource[i];

		if (isa_reg_p->regspec_addr < reg_p->regspec_addr)
			continue;
		if ((isa_reg_p->regspec_addr + isa_reg_p->regspec_size) >
		    (reg_p->regspec_addr + reg_p->regspec_size))
			continue;

		pci_reg_p->pci_phys_hi = PCI_ADDR_IO | PCI_REG_REL_M;
		pci_reg_p->pci_phys_mid = 0;
		pci_reg_p->pci_phys_low = isa_reg_p->regspec_addr;
		pci_reg_p->pci_size_hi = 0;
		pci_reg_p->pci_size_low = isa_reg_p->regspec_size;
		break;
	}
	if (i < isa_extra_count)
		return (DDI_SUCCESS);

	cmn_err(CE_WARN, "isa_apply_range: Out of range base <0x%x>, size <%d>",
	    isa_reg_p->regspec_addr, isa_reg_p->regspec_size);
	return (DDI_ME_REGSPEC_RANGE);
}

static int
isa_bus_map(dev_info_t *dip, dev_info_t *rdip, ddi_map_req_t *mp,
    off_t offset, off_t len, caddr_t *vaddrp)
{
	struct regspec tmp_reg, *rp;
	pci_regspec_t vreg;
	ddi_map_req_t mr = *mp;		/* Get private copy of request */
	int error;

	if (pseudo_isa)
		return (i_ddi_bus_map(dip, rdip, mp, offset, len, vaddrp));

	mp = &mr;

	/*
	 * First, if given an rnumber, convert it to a regspec...
	 */
	if (mp->map_type == DDI_MT_RNUMBER)  {

		int rnumber = mp->map_obj.rnumber;

		rp = i_ddi_rnumber_to_regspec(rdip, rnumber);
		if (rp == (struct regspec *)0)
			return (DDI_ME_RNUMBER_RANGE);

		/*
		 * Convert the given ddi_map_req_t from rnumber to regspec...
		 */
		mp->map_type = DDI_MT_REGSPEC;
		mp->map_obj.rp = rp;
	}

	/*
	 * Adjust offset and length correspnding to called values...
	 * XXX: A non-zero length means override the one in the regspec.
	 * XXX: (Regardless of what's in the parent's range)
	 */

	tmp_reg = *(mp->map_obj.rp);		/* Preserve underlying data */
	rp = mp->map_obj.rp = &tmp_reg;		/* Use tmp_reg in request */

	rp->regspec_addr += (uint_t)offset;
	if (len != 0)
		rp->regspec_size = (uint_t)len;

	if ((error = isa_apply_range(dip, rp, &vreg)) != 0)
		return (error);
	mp->map_obj.rp = (struct regspec *)&vreg;

	/*
	 * Call my parents bus_map function with modified values...
	 */

	return (ddi_map(dip, mp, (off_t)0, (off_t)0, vaddrp));
}

static int
isa_dma_allochdl(dev_info_t *dip, dev_info_t *rdip, ddi_dma_attr_t *dma_attr,
    int (*waitfp)(caddr_t), caddr_t arg, ddi_dma_handle_t *handlep)
{
	ddi_dma_attr_merge(dma_attr, &ISA_dma_attr);
	return (ddi_dma_allochdl(dip, rdip, dma_attr, waitfp, arg, handlep));
}

static int
isa_dma_mctl(dev_info_t *dip, dev_info_t *rdip,
    ddi_dma_handle_t handle, enum ddi_dma_ctlops request,
    off_t *offp, size_t *lenp, caddr_t *objp, uint_t flags)
{
	int rval;
	int arg = (int)(uintptr_t)objp;

	switch (request) {

	case DDI_DMA_E_PROG:
		return (i_dmae_prog(rdip, (struct ddi_dmae_req *)offp,
		    (ddi_dma_cookie_t *)lenp, arg));

	case DDI_DMA_E_ACQUIRE:
		return (i_dmae_acquire(rdip, arg, (int(*)(caddr_t))offp,
		    (caddr_t)lenp));

	case DDI_DMA_E_FREE:
		return (i_dmae_free(rdip, arg));

	case DDI_DMA_E_STOP:
		i_dmae_stop(rdip, arg);
		return (DDI_SUCCESS);

	case DDI_DMA_E_ENABLE:
		i_dmae_enable(rdip, arg);
		return (DDI_SUCCESS);

	case DDI_DMA_E_DISABLE:
		i_dmae_disable(rdip, arg);
		return (DDI_SUCCESS);

	case DDI_DMA_E_GETCNT:
		i_dmae_get_chan_stat(rdip, arg, NULL, (int *)lenp);
		return (DDI_SUCCESS);

	case DDI_DMA_E_SWSETUP:
		return (i_dmae_swsetup(rdip, (struct ddi_dmae_req *)offp,
		    (ddi_dma_cookie_t *)lenp, arg));

	case DDI_DMA_E_SWSTART:
		i_dmae_swstart(rdip, arg);
		return (DDI_SUCCESS);

	case DDI_DMA_E_GETATTR:
		bcopy(&ISA_dma_attr, objp, sizeof (ddi_dma_attr_t));
		return (DDI_SUCCESS);

	case DDI_DMA_E_1STPTY:
		{
			struct ddi_dmae_req req1stpty =
			    { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
			if (arg == 0) {
				req1stpty.der_command = DMAE_CMD_TRAN;
				req1stpty.der_trans = DMAE_TRANS_DMND;
			} else {
				req1stpty.der_trans = DMAE_TRANS_CSCD;
			}
			return (i_dmae_prog(rdip, &req1stpty, NULL, arg));
		}

	default:
		/*
		 * We pass to rootnex, but it turns out that rootnex will just
		 * return failure, as we don't use ddi_dma_mctl() except
		 * for DMA engine (ISA) and DVMA (SPARC).  Arguably we could
		 * just return an error direclty here, instead.
		 */
		rval = ddi_dma_mctl(dip, rdip, handle, request, offp,
		    lenp, objp, flags);
	}
	return (rval);
}

/*
 * Check if driver should be treated as an old pre 2.6 driver
 */
static int
old_driver(dev_info_t *dip)
{
	extern int ignore_hardware_nodes;	/* force flag from ddi_impl.c */

	if (ndi_dev_is_persistent_node(dip)) {
		if (ignore_hardware_nodes)
			return (1);
		if (ddi_getprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
		    "ignore-hardware-nodes", -1) != -1)
			return (1);
	}
	return (0);
}

typedef struct {
	uint32_t phys_hi;
	uint32_t phys_lo;
	uint32_t size;
} isa_regs_t;

/*
 * Return non-zero if device in tree is a PnP isa device
 */
static int
is_pnpisa(dev_info_t *dip)
{
	isa_regs_t *isa_regs;
	int proplen, pnpisa;

	if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, "reg",
	    (caddr_t)&isa_regs, &proplen) != DDI_PROP_SUCCESS) {
		return (0);
	}
	pnpisa = isa_regs[0].phys_hi & 0x80000000;
	/*
	 * free the memory allocated by ddi_getlongprop().
	 */
	kmem_free(isa_regs, proplen);
	if (pnpisa)
		return (1);
	else
		return (0);
}

/*ARGSUSED*/
static int
isa_ctlops(dev_info_t *dip, dev_info_t *rdip,
	ddi_ctl_enum_t ctlop, void *arg, void *result)
{
	int rn;
	struct ddi_parent_private_data *pdp;

	switch (ctlop) {
	case DDI_CTLOPS_REPORTDEV:
		if (rdip == (dev_info_t *)0)
			return (DDI_FAILURE);
		cmn_err(CE_CONT, "?ISA-device: %s%d\n",
		    ddi_driver_name(rdip), ddi_get_instance(rdip));
		return (DDI_SUCCESS);

	case DDI_CTLOPS_INITCHILD:
		/*
		 * older drivers aren't expecting the "standard" device
		 * node format used by the hardware nodes.  these drivers
		 * only expect their own properties set in their driver.conf
		 * files.  so they tell us not to call them with hardware
		 * nodes by setting the property "ignore-hardware-nodes".
		 */
		if (old_driver((dev_info_t *)arg)) {
			return (DDI_NOT_WELL_FORMED);
		}

		return (isa_initchild((dev_info_t *)arg));

	case DDI_CTLOPS_UNINITCHILD:
		impl_ddi_sunbus_removechild((dev_info_t *)arg);
		return (DDI_SUCCESS);

	case DDI_CTLOPS_SIDDEV:
		if (ndi_dev_is_persistent_node(rdip))
			return (DDI_SUCCESS);
		/*
		 * All ISA devices need to do confirming probes
		 * unless they are PnP ISA.
		 */
		if (is_pnpisa(rdip))
			return (DDI_SUCCESS);
		else
			return (DDI_FAILURE);

	case DDI_CTLOPS_REGSIZE:
	case DDI_CTLOPS_NREGS:
		if (rdip == (dev_info_t *)0)
			return (DDI_FAILURE);

		if ((pdp = ddi_get_parent_data(rdip)) == NULL)
			return (DDI_FAILURE);

		if (ctlop == DDI_CTLOPS_NREGS) {
			*(int *)result = pdp->par_nreg;
		} else {
			rn = *(int *)arg;
			if (rn >= pdp->par_nreg)
				return (DDI_FAILURE);
			*(off_t *)result = (off_t)pdp->par_reg[rn].regspec_size;
		}
		return (DDI_SUCCESS);

	case DDI_CTLOPS_ATTACH:
	case DDI_CTLOPS_DETACH:
	case DDI_CTLOPS_PEEK:
	case DDI_CTLOPS_POKE:
		return (DDI_FAILURE);

	default:
		return (ddi_ctlops(dip, rdip, ctlop, arg, result));
	}
}

static struct intrspec *
isa_get_ispec(dev_info_t *rdip, int inum)
{
	struct ddi_parent_private_data *pdp = ddi_get_parent_data(rdip);

	/* Validate the interrupt number */
	if (inum >= pdp->par_nintr)
		return (NULL);

	/* Get the interrupt structure pointer and return that */
	return ((struct intrspec *)&pdp->par_intr[inum]);
}

static int
isa_intr_ops(dev_info_t *pdip, dev_info_t *rdip, ddi_intr_op_t intr_op,
    ddi_intr_handle_impl_t *hdlp, void *result)
{
	struct intrspec *ispec;
#if defined(__xpv)
	int cons, ttyn;

	cons = console_hypervisor_dev_type(&ttyn);
#endif
	if (pseudo_isa)
		return (i_ddi_intr_ops(pdip, rdip, intr_op, hdlp, result));


	/* Process the interrupt operation */
	switch (intr_op) {
	case DDI_INTROP_GETCAP:
		/* First check with pcplusmp */
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_GET_CAP, result)) {
			*(int *)result = 0;
			return (DDI_FAILURE);
		}
		break;
	case DDI_INTROP_SETCAP:
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_SET_CAP, result))
			return (DDI_FAILURE);
		break;
	case DDI_INTROP_ALLOC:
		ASSERT(hdlp->ih_type == DDI_INTR_TYPE_FIXED);
		return (isa_alloc_intr_fixed(rdip, hdlp, result));
	case DDI_INTROP_FREE:
		ASSERT(hdlp->ih_type == DDI_INTR_TYPE_FIXED);
		return (isa_free_intr_fixed(rdip, hdlp));
	case DDI_INTROP_GETPRI:
		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
			return (DDI_FAILURE);
		*(int *)result = ispec->intrspec_pri;
		break;
	case DDI_INTROP_SETPRI:
		/* Validate the interrupt priority passed to us */
		if (*(int *)result > LOCK_LEVEL)
			return (DDI_FAILURE);

		/* Ensure that PSM is all initialized and ispec is ok */
		if ((psm_intr_ops == NULL) ||
		    ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL))
			return (DDI_FAILURE);

		/* update the ispec with the new priority */
		ispec->intrspec_pri =  *(int *)result;
		break;
	case DDI_INTROP_ADDISR:
		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
			return (DDI_FAILURE);
		ispec->intrspec_func = hdlp->ih_cb_func;
		break;
	case DDI_INTROP_REMISR:
		if (hdlp->ih_type != DDI_INTR_TYPE_FIXED)
			return (DDI_FAILURE);
		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
			return (DDI_FAILURE);
		ispec->intrspec_func = (uint_t (*)()) 0;
		break;
	case DDI_INTROP_ENABLE:
		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
			return (DDI_FAILURE);

		/* Call psmi to translate irq with the dip */
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

#if defined(__xpv)
		/*
		 * if the hypervisor is using an isa serial port for the
		 * console, make sure we don't try to use that interrupt as
		 * it will cause us to panic when xen_bind_pirq() fails.
		 */
		if (cons == CONS_TTY && ispec->intrspec_vec == asy_intrs[ttyn])
			return (DDI_FAILURE);
#endif
		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_XLATE_VECTOR,
		    (int *)&hdlp->ih_vector) == PSM_FAILURE)
			return (DDI_FAILURE);

		/* Add the interrupt handler */
		if (!add_avintr((void *)hdlp, ispec->intrspec_pri,
		    hdlp->ih_cb_func, DEVI(rdip)->devi_name, hdlp->ih_vector,
		    hdlp->ih_cb_arg1, hdlp->ih_cb_arg2, NULL, rdip))
			return (DDI_FAILURE);
		break;
	case DDI_INTROP_DISABLE:
		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
			return (DDI_FAILURE);

		/* Call psm_ops() to translate irq with the dip */
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
		(void) (*psm_intr_ops)(rdip, hdlp,
		    PSM_INTR_OP_XLATE_VECTOR, (int *)&hdlp->ih_vector);

		/* Remove the interrupt handler */
		rem_avintr((void *)hdlp, ispec->intrspec_pri,
		    hdlp->ih_cb_func, hdlp->ih_vector);
		break;
	case DDI_INTROP_SETMASK:
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_SET_MASK, NULL))
			return (DDI_FAILURE);
		break;
	case DDI_INTROP_CLRMASK:
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_CLEAR_MASK, NULL))
			return (DDI_FAILURE);
		break;
	case DDI_INTROP_GETPENDING:
		if (psm_intr_ops == NULL)
			return (DDI_FAILURE);

		if ((*psm_intr_ops)(rdip, hdlp, PSM_INTR_OP_GET_PENDING,
		    result)) {
			*(int *)result = 0;
			return (DDI_FAILURE);
		}
		break;
	case DDI_INTROP_NAVAIL:
	case DDI_INTROP_NINTRS:
		*(int *)result = i_ddi_get_intx_nintrs(rdip);
		if (*(int *)result == 0) {
			return (DDI_FAILURE);
		}
		break;
	case DDI_INTROP_SUPPORTED_TYPES:
		*(int *)result = DDI_INTR_TYPE_FIXED;	/* Always ... */
		break;
	default:
		return (DDI_FAILURE);
	}

	return (DDI_SUCCESS);
}

/*
 * Allocate interrupt vector for FIXED (legacy) type.
 */
static int
isa_alloc_intr_fixed(dev_info_t *rdip, ddi_intr_handle_impl_t *hdlp,
    void *result)
{
	struct intrspec		*ispec;
	ddi_intr_handle_impl_t	info_hdl;
	int			ret;
	int			free_phdl = 0;
	apic_get_type_t		type_info;

	if (psm_intr_ops == NULL)
		return (DDI_FAILURE);

	if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
		return (DDI_FAILURE);

	/*
	 * If the PSM module is "APIX" then pass the request for it
	 * to allocate the vector now.
	 */
	bzero(&info_hdl, sizeof (ddi_intr_handle_impl_t));
	info_hdl.ih_private = &type_info;
	if ((*psm_intr_ops)(NULL, &info_hdl, PSM_INTR_OP_APIC_TYPE, NULL) ==
	    PSM_SUCCESS && strcmp(type_info.avgi_type, APIC_APIX_NAME) == 0) {
		if (hdlp->ih_private == NULL) { /* allocate phdl structure */
			free_phdl = 1;
			i_ddi_alloc_intr_phdl(hdlp);
		}
		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
		ret = (*psm_intr_ops)(rdip, hdlp,
		    PSM_INTR_OP_ALLOC_VECTORS, result);
		if (free_phdl) { /* free up the phdl structure */
			free_phdl = 0;
			i_ddi_free_intr_phdl(hdlp);
			hdlp->ih_private = NULL;
		}
	} else {
		/*
		 * No APIX module; fall back to the old scheme where the
		 * interrupt vector is allocated during ddi_enable_intr() call.
		 */
		hdlp->ih_pri = ispec->intrspec_pri;
		*(int *)result = hdlp->ih_scratch1;
		ret = DDI_SUCCESS;
	}

	return (ret);
}

/*
 * Free up interrupt vector for FIXED (legacy) type.
 */
static int
isa_free_intr_fixed(dev_info_t *rdip, ddi_intr_handle_impl_t *hdlp)
{
	struct intrspec			*ispec;
	ddi_intr_handle_impl_t		info_hdl;
	int				ret;
	apic_get_type_t			type_info;

	if (psm_intr_ops == NULL)
		return (DDI_FAILURE);

	/*
	 * If the PSM module is "APIX" then pass the request for it
	 * to free up the vector now.
	 */
	bzero(&info_hdl, sizeof (ddi_intr_handle_impl_t));
	info_hdl.ih_private = &type_info;
	if ((*psm_intr_ops)(NULL, &info_hdl, PSM_INTR_OP_APIC_TYPE, NULL) ==
	    PSM_SUCCESS && strcmp(type_info.avgi_type, APIC_APIX_NAME) == 0) {
		if ((ispec = isa_get_ispec(rdip, hdlp->ih_inum)) == NULL)
			return (DDI_FAILURE);
		((ihdl_plat_t *)hdlp->ih_private)->ip_ispecp = ispec;
		ret = (*psm_intr_ops)(rdip, hdlp,
		    PSM_INTR_OP_FREE_VECTORS, NULL);
	} else {
		/*
		 * No APIX module; fall back to the old scheme where
		 * the interrupt vector was already freed during
		 * ddi_disable_intr() call.
		 */
		ret = DDI_SUCCESS;
	}

	return (ret);
}

static void
isa_vendor(uint32_t id, char *vendor)
{
	vendor[0] = '@' + ((id >> 26) & 0x1f);
	vendor[1] = '@' + ((id >> 21) & 0x1f);
	vendor[2] = '@' + ((id >> 16) & 0x1f);
	vendor[3] = 0;
}

/*
 * Name a child
 */
static int
isa_name_child(dev_info_t *child, char *name, int namelen)
{
	char vendor[8];
	int device;
	uint32_t serial;
	int func;
	int bustype;
	uint32_t base;
	int proplen;
	int pnpisa = 0;
	isa_regs_t *isa_regs;

	void make_ddi_ppd(dev_info_t *, struct ddi_parent_private_data **);

	/*
	 * older drivers aren't expecting the "standard" device
	 * node format used by the hardware nodes.  these drivers
	 * only expect their own properties set in their driver.conf
	 * files.  so they tell us not to call them with hardware
	 * nodes by setting the property "ignore-hardware-nodes".
	 */
	if (old_driver(child))
		return (DDI_FAILURE);

	/*
	 * Fill in parent-private data
	 */
	if (ddi_get_parent_data(child) == NULL) {
		struct ddi_parent_private_data *pdptr;
		make_ddi_ppd(child, &pdptr);
		ddi_set_parent_data(child, pdptr);
	}

	if (ndi_dev_is_persistent_node(child) == 0) {
		/*
		 * For .conf nodes, generate name from parent private data
		 */
		name[0] = '\0';
		if (sparc_pd_getnreg(child) > 0) {
			(void) snprintf(name, namelen, "%x,%x",
			    (uint_t)sparc_pd_getreg(child, 0)->regspec_bustype,
			    (uint_t)sparc_pd_getreg(child, 0)->regspec_addr);
		}
		return (DDI_SUCCESS);
	}

	/*
	 * For hw nodes, look up "reg" property
	 */
	if (ddi_getlongprop(DDI_DEV_T_ANY, child, DDI_PROP_DONTPASS, "reg",
	    (caddr_t)&isa_regs, &proplen) != DDI_PROP_SUCCESS) {
		return (DDI_FAILURE);
	}

	/*
	 * extract the device identifications
	 */
	pnpisa = isa_regs[0].phys_hi & 0x80000000;
	if (pnpisa) {
		isa_vendor(isa_regs[0].phys_hi, vendor);
		device = isa_regs[0].phys_hi & 0xffff;
		serial = isa_regs[0].phys_lo;
		func = (isa_regs[0].size >> 24) & 0xff;
		if (func != 0)
			(void) snprintf(name, namelen, "pnp%s,%04x,%x,%x",
			    vendor, device, serial, func);
		else
			(void) snprintf(name, namelen, "pnp%s,%04x,%x",
			    vendor, device, serial);
	} else {
		bustype = isa_regs[0].phys_hi;
		base = isa_regs[0].phys_lo;
		(void) sprintf(name, "%x,%x", bustype, base);
	}

	/*
	 * free the memory allocated by ddi_getlongprop().
	 */
	kmem_free(isa_regs, proplen);

	return (DDI_SUCCESS);
}

static int
isa_initchild(dev_info_t *child)
{
	char name[80];

	if (isa_name_child(child, name, 80) != DDI_SUCCESS)
		return (DDI_FAILURE);
	ddi_set_name_addr(child, name);

	if (ndi_dev_is_persistent_node(child) != 0)
		return (DDI_SUCCESS);

	/*
	 * This is a .conf node, try merge properties onto a
	 * hw node with the same name.
	 */
	if (ndi_merge_node(child, isa_name_child) == DDI_SUCCESS) {
		/*
		 * Return failure to remove node
		 */
		impl_ddi_sunbus_removechild(child);
		return (DDI_FAILURE);
	}
	/*
	 * Cannot merge node, permit pseudo children
	 */
	return (DDI_SUCCESS);
}

/*
 * called when ACPI enumeration is not used
 */
static void
add_known_used_resources(void)
{
	/* needs to be in increasing order */
	int intr[] = {0x1, 0x3, 0x4, 0x6, 0x7, 0xc};
	int dma[] = {0x2};
	int io[] = {0x60, 0x1, 0x64, 0x1, 0x2f8, 0x8, 0x378, 0x8, 0x3f0, 0x10,
	    0x778, 0x4};
	dev_info_t *usedrdip;

	usedrdip = ddi_find_devinfo(USED_RESOURCES, -1, 0);

	if (usedrdip == NULL) {
		(void) ndi_devi_alloc_sleep(ddi_root_node(), USED_RESOURCES,
		    (pnode_t)DEVI_SID_NODEID, &usedrdip);
	}

	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, usedrdip,
	    "interrupts", (int *)intr, (int)(sizeof (intr) / sizeof (int)));
	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, usedrdip,
	    "io-space", (int *)io, (int)(sizeof (io) / sizeof (int)));
	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, usedrdip,
	    "dma-channels", (int *)dma, (int)(sizeof (dma) / sizeof (int)));
	(void) ndi_devi_bind_driver(usedrdip, 0);

}

/*
 * Return non-zero if UART device exists.
 */
static int
uart_exists(ushort_t port)
{
	outb(port + COM_SCR, (char)0x5a);
	outb(port + COM_ISR, (char)0x00);
	return (inb(port + COM_SCR) == (char)0x5a);
}

static void
isa_enumerate(int reprogram)
{
	int circ, i;
	dev_info_t *xdip;
	dev_info_t *isa_dip = ddi_find_devinfo("isa", -1, 0);

	struct regspec i8042_regs[] = {
		{1, 0x60, 0x1},
		{1, 0x64, 0x1}
	};
	int i8042_intrs[] = {0x1, 0xc};
	char *acpi_prop;
	int acpi_enum = 1; /* ACPI is default to be on */
#if defined(__xpv)
	int cons, ttyn;

	cons = console_hypervisor_dev_type(&ttyn);
#endif
	if (reprogram || !isa_dip)
		return;

	bzero(isa_extra_resource, MAX_EXTRA_RESOURCE * sizeof (struct regspec));

	ndi_devi_enter(isa_dip, &circ);

	if (ddi_prop_lookup_string(DDI_DEV_T_ANY, ddi_root_node(),
	    DDI_PROP_DONTPASS, "acpi-enum", &acpi_prop) == DDI_PROP_SUCCESS) {
		acpi_enum = strcmp("off", acpi_prop);
		ddi_prop_free(acpi_prop);
	}

	if (acpi_enum) {
		if (acpi_isa_device_enum(isa_dip)) {
			ndi_devi_exit(isa_dip, circ);
			if (isa_resource_setup() != NDI_SUCCESS) {
				cmn_err(CE_WARN, "isa nexus: isa "
				    "resource setup failed");
			}

			/* serial ports? */
			enumerate_BIOS_serial(isa_dip);

			/* adjust parallel port size  */
			adjust_prtsz(isa_dip);

			isa_create_ranges_prop(isa_dip);
			return;
		}
		cmn_err(CE_NOTE, "!Solaris did not detect ACPI BIOS");
	}
	cmn_err(CE_NOTE, "!ACPI is off");

	/* serial ports */
	for (i = 0; i < min_BIOS_serial; i++) {
		ushort_t addr = asy_regs[i].regspec_addr;
		if (!uart_exists(addr))
			continue;
#if defined(__xpv)
		if (cons == CONS_TTY && ttyn == i)
			continue;
#endif
		ndi_devi_alloc_sleep(isa_dip, "asy",
		    (pnode_t)DEVI_SID_NODEID, &xdip);
		(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
		    "compatible", "PNP0500");
		/* This should be gotten from master file: */
		(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
		    "model", "Standard PC COM port");
		(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
		    "reg", (int *)&asy_regs[i], 3);
		(void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
		    "interrupts", asy_intrs[i]);
		(void) ndi_devi_bind_driver(xdip, 0);
		/* Adjusting isa_extra here causes a kernel dump later. */
	}

	/* i8042 node */
	ndi_devi_alloc_sleep(isa_dip, "i8042",
	    (pnode_t)DEVI_SID_NODEID, &xdip);
	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
	    "reg", (int *)i8042_regs, 6);
	(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
	    "interrupts", (int *)i8042_intrs, 2);
	(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
	    "unit-address", "1,60");
	(void) ndi_devi_bind_driver(xdip, 0);

	add_known_used_resources();

	ndi_devi_exit(isa_dip, circ);

	isa_create_ranges_prop(isa_dip);
}

/*
 * On some machines, serial port 2 isn't listed in the ACPI table.
 * This function goes through the base I/O addresses and makes sure all
 * the serial ports there are in the dev_info tree.  If any are missing,
 * this function will add them.
 */

static void
enumerate_BIOS_serial(dev_info_t *isa_dip)
{
	int i;
	dev_info_t *xdip;
	int found;
	int ret;
	struct regspec *tmpregs;
	int tmpregs_len;
#if defined(__xpv)
	int cons, ttyn;

	cons = console_hypervisor_dev_type(&ttyn);
#endif

	/*
	 * Scan the base I/O addresses of the first four serial ports.
	 */
	for (i = 0; i < num_BIOS_serial; i++) {
		ushort_t addr = asy_regs[i].regspec_addr;

		/* Look for it in the dev_info tree */
		found = 0;
		for (xdip = ddi_get_child(isa_dip); xdip != NULL;
		    xdip = ddi_get_next_sibling(xdip)) {
			if (strncmp(ddi_node_name(xdip), "asy", 3) != 0) {
				/* skip non asy */
				continue;
			}

			/* Match by addr */
			ret = ddi_prop_lookup_int_array(DDI_DEV_T_ANY, xdip,
			    DDI_PROP_DONTPASS, "reg", (int **)&tmpregs,
			    (uint_t *)&tmpregs_len);
			if (ret != DDI_PROP_SUCCESS) {
				/* error */
				continue;
			}

			if (tmpregs->regspec_addr == addr)
				found = 1;

			/*
			 * Free the memory allocated by
			 * ddi_prop_lookup_int_array().
			 */
			ddi_prop_free(tmpregs);

			if (found) {
				if (asy_intr_override & 1<<i) {
					(void) ndi_prop_update_int(
					    DDI_DEV_T_NONE, xdip,
					    "interrupts", asy_intrs[i]);
				}

				break;
			}
		}

		/* If not found, then add it */
		if (!found && uart_exists(addr)) {
			ndi_devi_alloc_sleep(isa_dip, "asy",
			    (pnode_t)DEVI_SID_NODEID, &xdip);
			(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
			    "compatible", "PNP0500");
			/* This should be gotten from master file: */
			(void) ndi_prop_update_string(DDI_DEV_T_NONE, xdip,
			    "model", "Standard PC COM port");
			(void) ndi_prop_update_int_array(DDI_DEV_T_NONE, xdip,
			    "reg", (int *)&asy_regs[i], 3);
			(void) ndi_prop_update_int(DDI_DEV_T_NONE, xdip,
			    "interrupts", asy_intrs[i]);
			(void) ndi_devi_bind_driver(xdip, 0);

			ASSERT(isa_extra_count < MAX_EXTRA_RESOURCE);
			bcopy(&asy_regs[i],
			    isa_extra_resource + isa_extra_count,
			    sizeof (struct regspec));
			isa_extra_count++;
		}
	}

	/*
	 * An asy node may have been attached via ACPI enumeration, or
	 * directly from this file.  Check each serial port to see if it
	 * is in use by the hypervisor.  If it is in use, then remove
	 * the node from the device tree.
	 */
#if defined(__xpv)
	i = 0;

	for (xdip = ddi_get_child(isa_dip); xdip != NULL; ) {
		dev_info_t *curdip;

		curdip = xdip;
		xdip = ddi_get_next_sibling(xdip);

		if (strncmp(ddi_node_name(curdip), "asy", 3) != 0)
			continue;

		if (cons == CONS_TTY && ttyn == i) {
			ret = ndi_devi_free(curdip);
			if (ret != DDI_SUCCESS) {
				cmn_err(CE_WARN,
				    "could not remove asy%d node", i);
			}

			cmn_err(CE_NOTE, "!asy%d unavailable, reserved"
			    " to hypervisor", i);
		}

		i++;
	}
#endif

}

/*
 * Some machine comes with an illegal parallel port size of 3
 * bytes in ACPI, even parallel port mode is ECP.
 */
#define	DEFAULT_PRT_SIZE	8
static void
adjust_prtsz(dev_info_t *isa_dip)
{
	dev_info_t *cdip;
	struct regspec *regs_p, *extreg_p;
	int regs_len, nreg, i;
	char *name;

	for (cdip = ddi_get_child(isa_dip); cdip != NULL;
	    cdip = ddi_get_next_sibling(cdip)) {
		name = ddi_node_name(cdip);
		if ((strncmp(name, "lp", 2) != 0) || (strnlen(name, 3) != 2))
			continue;	/* skip non parallel */

		if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, cdip,
		    DDI_PROP_DONTPASS, "reg", (int **)&regs_p,
		    (uint_t *)&regs_len) != DDI_PROP_SUCCESS)
			continue;

		nreg = regs_len / (sizeof (struct regspec) / sizeof (int));
		for (i = 0; i < nreg; i++) {
			if (regs_p[i].regspec_size == DEFAULT_PRT_SIZE)
				continue;

			ASSERT(isa_extra_count < MAX_EXTRA_RESOURCE);
			extreg_p = &isa_extra_resource[isa_extra_count++];
			extreg_p->regspec_bustype = ISA_ADDR_IO;
			extreg_p->regspec_addr = regs_p[i].regspec_addr;
			extreg_p->regspec_size = DEFAULT_PRT_SIZE;
		}

		ddi_prop_free(regs_p);
	}
}