xref: /titanic_41/usr/src/uts/common/vm/seg_kpm.c (revision 70025d765b044c6d8594bb965a2247a61e991a99)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 /*
30  * Kernel Physical Mapping (kpm) segment driver (segkpm).
31  *
32  * This driver delivers along with the hat_kpm* interfaces an alternative
33  * mechanism for kernel mappings within the 64-bit Solaris operating system,
34  * which allows the mapping of all physical memory into the kernel address
35  * space at once. This is feasible in 64 bit kernels, e.g. for Ultrasparc II
36  * and beyond processors, since the available VA range is much larger than
37  * possible physical memory. Momentarily all physical memory is supported,
38  * that is represented by the list of memory segments (memsegs).
39  *
40  * Segkpm mappings have also very low overhead and large pages are used
41  * (when possible) to minimize the TLB and TSB footprint. It is also
42  * extentable for other than Sparc architectures (e.g. AMD64). Main
43  * advantage is the avoidance of the TLB-shootdown X-calls, which are
44  * normally needed when a kernel (global) mapping has to be removed.
45  *
46  * First example of a kernel facility that uses the segkpm mapping scheme
47  * is seg_map, where it is used as an alternative to hat_memload().
48  * See also hat layer for more information about the hat_kpm* routines.
49  * The kpm facilty can be turned off at boot time (e.g. /etc/system).
50  */
51 
52 #include <sys/types.h>
53 #include <sys/param.h>
54 #include <sys/sysmacros.h>
55 #include <sys/systm.h>
56 #include <sys/vnode.h>
57 #include <sys/cmn_err.h>
58 #include <sys/debug.h>
59 #include <sys/thread.h>
60 #include <sys/cpuvar.h>
61 #include <sys/bitmap.h>
62 #include <sys/atomic.h>
63 #include <sys/lgrp.h>
64 
65 #include <vm/seg_kmem.h>
66 #include <vm/seg_kpm.h>
67 #include <vm/hat.h>
68 #include <vm/as.h>
69 #include <vm/seg.h>
70 #include <vm/page.h>
71 
72 /*
73  * Global kpm controls.
74  * See also platform and mmu specific controls.
75  *
76  * kpm_enable -- global on/off switch for segkpm.
77  * . Set by default on 64bit platforms that have kpm support.
78  * . Will be disabled from platform layer if not supported.
79  * . Can be disabled via /etc/system.
80  *
81  * kpm_smallpages -- use only regular/system pagesize for kpm mappings.
82  * . Can be useful for critical debugging of kpm clients.
83  * . Set to zero by default for platforms that support kpm large pages.
84  *   The use of kpm large pages reduces the footprint of kpm meta data
85  *   and has all the other advantages of using large pages (e.g TLB
86  *   miss reduction).
87  * . Set by default for platforms that don't support kpm large pages or
88  *   where large pages cannot be used for other reasons (e.g. there are
89  *   only few full associative TLB entries available for large pages).
90  *
91  * segmap_kpm -- separate on/off switch for segmap using segkpm:
92  * . Set by default.
93  * . Will be disabled when kpm_enable is zero.
94  * . Will be disabled when MAXBSIZE != PAGESIZE.
95  * . Can be disabled via /etc/system.
96  *
97  */
98 int kpm_enable = 1;
99 int kpm_smallpages = 0;
100 int segmap_kpm = 1;
101 
102 /*
103  * Private seg op routines.
104  */
105 faultcode_t segkpm_fault(struct hat *hat, struct seg *seg, caddr_t addr,
106 			size_t len, enum fault_type type, enum seg_rw rw);
107 static void	segkpm_dump(struct seg *);
108 static void	segkpm_badop(void);
109 static int	segkpm_notsup(void);
110 static int	segkpm_capable(struct seg *, segcapability_t);
111 
112 #define	SEGKPM_BADOP(t)	(t(*)())segkpm_badop
113 #define	SEGKPM_NOTSUP	(int(*)())segkpm_notsup
114 
115 static struct seg_ops segkpm_ops = {
116 	SEGKPM_BADOP(int),	/* dup */
117 	SEGKPM_BADOP(int),	/* unmap */
118 	SEGKPM_BADOP(void),	/* free */
119 	segkpm_fault,
120 	SEGKPM_BADOP(int),	/* faulta */
121 	SEGKPM_BADOP(int),	/* setprot */
122 	SEGKPM_BADOP(int),	/* checkprot */
123 	SEGKPM_BADOP(int),	/* kluster */
124 	SEGKPM_BADOP(size_t),	/* swapout */
125 	SEGKPM_BADOP(int),	/* sync */
126 	SEGKPM_BADOP(size_t),	/* incore */
127 	SEGKPM_BADOP(int),	/* lockop */
128 	SEGKPM_BADOP(int),	/* getprot */
129 	SEGKPM_BADOP(u_offset_t), /* getoffset */
130 	SEGKPM_BADOP(int),	/* gettype */
131 	SEGKPM_BADOP(int),	/* getvp */
132 	SEGKPM_BADOP(int),	/* advise */
133 	segkpm_dump,		/* dump */
134 	SEGKPM_NOTSUP,		/* pagelock */
135 	SEGKPM_BADOP(int),	/* setpgsz */
136 	SEGKPM_BADOP(int),	/* getmemid */
137 	SEGKPM_BADOP(lgrp_mem_policy_info_t *),	/* getpolicy */
138 	segkpm_capable,		/* capable */
139 };
140 
141 /*
142  * kpm_pgsz and kpm_pgshft are set by platform layer.
143  */
144 size_t		kpm_pgsz;	/* kpm page size */
145 uint_t		kpm_pgshft;	/* kpm page shift */
146 u_offset_t	kpm_pgoff;	/* kpm page offset mask */
147 uint_t		kpmp2pshft;	/* kpm page to page shift */
148 pgcnt_t		kpmpnpgs;	/* how many pages per kpm page */
149 
150 
151 #ifdef	SEGKPM_SUPPORT
152 
153 int
154 segkpm_create(struct seg *seg, void *argsp)
155 {
156 	struct segkpm_data *skd;
157 	struct segkpm_crargs *b = (struct segkpm_crargs *)argsp;
158 	ushort_t *p;
159 	int i, j;
160 
161 	ASSERT(seg->s_as && RW_WRITE_HELD(&seg->s_as->a_lock));
162 	ASSERT(btokpmp(seg->s_size) >= 1 &&
163 		kpmpageoff((uintptr_t)seg->s_base) == 0 &&
164 		kpmpageoff((uintptr_t)seg->s_base + seg->s_size) == 0);
165 
166 	skd = kmem_zalloc(sizeof (struct segkpm_data), KM_SLEEP);
167 
168 	seg->s_data = (void *)skd;
169 	seg->s_ops = &segkpm_ops;
170 	skd->skd_prot = b->prot;
171 
172 	/*
173 	 * (1) Segkpm virtual addresses are based on physical adresses.
174 	 * From this and in opposite to other segment drivers it is
175 	 * often required to allocate a page first to be able to
176 	 * calculate the final segkpm virtual address.
177 	 * (2) Page  allocation is done by calling page_create_va(),
178 	 * one important input argument is a virtual address (also
179 	 * expressed by the "va" in the function name). This function
180 	 * is highly optimized to select the right page for an optimal
181 	 * processor and platform support (e.g. virtual addressed
182 	 * caches (VAC), physical addressed caches, NUMA).
183 	 *
184 	 * Because of (1) the approach is to generate a faked virtual
185 	 * address for calling page_create_va(). In order to exploit
186 	 * the abilities of (2), especially to utilize the cache
187 	 * hierarchy (3) and to avoid VAC alias conflicts (4) the
188 	 * selection has to be done carefully. For each virtual color
189 	 * a separate counter is provided (4). The count values are
190 	 * used for the utilization of all cache lines (3) and are
191 	 * corresponding to the cache bins.
192 	 */
193 	skd->skd_nvcolors = b->nvcolors;
194 
195 	p = skd->skd_va_select =
196 		kmem_zalloc(NCPU * b->nvcolors * sizeof (ushort_t), KM_SLEEP);
197 
198 	for (i = 0; i < NCPU; i++)
199 		for (j = 0; j < b->nvcolors; j++, p++)
200 			*p = j;
201 
202 	return (0);
203 }
204 
205 /*
206  * This routine is called via a machine specific fault handling
207  * routine.
208  */
209 /* ARGSUSED */
210 faultcode_t
211 segkpm_fault(struct hat *hat, struct seg *seg, caddr_t addr, size_t len,
212 	enum fault_type type, enum seg_rw rw)
213 {
214 	faultcode_t error;
215 
216 	ASSERT(seg->s_as && AS_LOCK_HELD(seg->s_as, &seg->s_as->a_lock));
217 
218 	error = hat_kpm_fault(hat, addr);
219 
220 	return (error);
221 }
222 
223 #define	addr_to_vcolor(addr, vcolors) \
224 	((int)(((uintptr_t)(addr) & ((vcolors << PAGESHIFT) - 1)) >> PAGESHIFT))
225 
226 /*
227  * Create a virtual address that can be used for invocations of
228  * page_create_va. Goal is to utilize the cache hierarchy (round
229  * robin bins) and to select the right color for virtual indexed
230  * caches. It isn't exact since we also increment the bin counter
231  * when the caller uses VOP_GETPAGE and gets a hit in the page
232  * cache, but we keep the bins turning for cache distribution
233  * (see also segkpm_create block comment).
234  */
235 caddr_t
236 segkpm_create_va(u_offset_t off)
237 {
238 	int vcolor;
239 	ushort_t *p;
240 	struct segkpm_data *skd = (struct segkpm_data *)segkpm->s_data;
241 	int nvcolors = skd->skd_nvcolors;
242 	caddr_t	va;
243 
244 	vcolor = (nvcolors > 1) ? addr_to_vcolor(off, nvcolors) : 0;
245 	p = &skd->skd_va_select[(CPU->cpu_id * nvcolors) + vcolor];
246 	va = (caddr_t)ptob(*p);
247 
248 	atomic_add_16(p, nvcolors);
249 
250 	return (va);
251 }
252 
253 /*
254  * Unload mapping if the instance has an active kpm mapping.
255  */
256 void
257 segkpm_mapout_validkpme(struct kpme *kpme)
258 {
259 	caddr_t vaddr;
260 	page_t *pp;
261 
262 retry:
263 	if ((pp = kpme->kpe_page) == NULL) {
264 		return;
265 	}
266 
267 	if (page_lock(pp, SE_SHARED, (kmutex_t *)NULL, P_RECLAIM) == 0)
268 		goto retry;
269 
270 	/*
271 	 * Check if segkpm mapping is not unloaded in the meantime
272 	 */
273 	if (kpme->kpe_page == NULL) {
274 		page_unlock(pp);
275 		return;
276 	}
277 
278 	vaddr = hat_kpm_page2va(pp, 1);
279 	hat_kpm_mapout(pp, kpme, vaddr);
280 	page_unlock(pp);
281 }
282 
283 static void
284 segkpm_badop()
285 {
286 	panic("segkpm_badop");
287 }
288 
289 #else	/* SEGKPM_SUPPORT */
290 
291 /* segkpm stubs */
292 
293 /*ARGSUSED*/
294 int segkpm_create(struct seg *seg, void *argsp) { return (0); }
295 
296 /* ARGSUSED */
297 faultcode_t
298 segkpm_fault(struct hat *hat, struct seg *seg, caddr_t addr, size_t len,
299 	enum fault_type type, enum seg_rw rw)
300 {
301 	return ((faultcode_t)0);
302 }
303 
304 /* ARGSUSED */
305 caddr_t segkpm_create_va(u_offset_t off) { return (NULL); }
306 
307 /* ARGSUSED */
308 void segkpm_mapout_validkpme(struct kpme *kpme) {}
309 
310 static void
311 segkpm_badop() {}
312 
313 #endif	/* SEGKPM_SUPPORT */
314 
315 static int
316 segkpm_notsup()
317 {
318 	return (ENOTSUP);
319 }
320 
321 /*
322  * segkpm pages are not dumped, so we just return
323  */
324 /*ARGSUSED*/
325 static void
326 segkpm_dump(struct seg *seg)
327 {}
328 
329 /*
330  * We claim to have no special capabilities.
331  */
332 /*ARGSUSED*/
333 static int
334 segkpm_capable(struct seg *seg, segcapability_t capability)
335 {
336 	return (0);
337 }
338