1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2004 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #ifndef _SYS_USB_HUB_H 28 #define _SYS_USB_HUB_H 29 30 #pragma ident "%Z%%M% %I% %E% SMI" 31 32 #ifdef __cplusplus 33 extern "C" { 34 #endif 35 36 #define USB_DESCR_TYPE_SETUP_HUB 0x2900 37 38 /* 39 * Section 11.11.2.1 allows up to 255 ports. 40 * For simplicity, only a maximum of 31 ports is currently allowed 41 */ 42 #define MAX_PORTS 31 43 44 typedef struct usb_hub_descr { 45 uchar_t bDescLength; /* size of descriptor */ 46 uchar_t bDescriptorType; /* descriptor type */ 47 uchar_t bNbrPorts; /* number of ports */ 48 uint16_t wHubCharacteristics; /* hub characteristics */ 49 uchar_t bPwrOn2PwrGood; /* time in ms from the time */ 50 /* power on sequence begins on a port */ 51 /* until power is good on that port */ 52 uchar_t bHubContrCurrent; /* max current requirements */ 53 uchar_t DeviceRemovable; 54 /* removable device attached */ 55 uchar_t PortPwrCtrlMask; 56 /* power control mask */ 57 } usb_hub_descr_t; 58 59 #define ROOT_HUB_DESCRIPTOR_LENGTH 9 60 #define ROOT_HUB_DESCRIPTOR_TYPE 0x29 61 #define ROOT_HUB_ADDR 0x01 /* address of root hub */ 62 63 /* Values for wHubCharacteristics */ 64 #define HUB_CHARS_POWER_SWITCHING_MODE 0x03 65 #define HUB_CHARS_GANGED_POWER 0x00 66 #define HUB_CHARS_INDIVIDUAL_PORT_POWER 0x01 67 #define HUB_CHARS_NO_POWER_SWITCHING 0x02 68 #define HUB_CHARS_COMPOUND_DEV 0x04 69 #define HUB_CHARS_GLOBAL_OVER_CURRENT 0x00 70 #define HUB_CHARS_INDIV_OVER_CURRENT 0x08 71 #define HUB_CHARS_NO_OVER_CURRENT 0x10 72 #define HUB_CHARS_TT_THINK_TIME 0x60 73 #define HUB_CHARS_TT_16FS_TIME 0x20 74 #define HUB_CHARS_TT_24FS_TIME 0x40 75 #define HUB_CHARS_TT_32FS_TIME 0x60 76 #define HUB_CHARS_PORT_INDICATOR 0x80 77 78 /* Default Power On to Power Good time */ 79 #define HUB_DEFAULT_POPG 10 80 81 /* Hub Status */ 82 #define HUB_CHANGE_STATUS 0x01 83 84 /* Class Specific bmRequestType values Table 11-10 */ 85 #define HANDLE_PORT_FEATURE (USB_DEV_REQ_HOST_TO_DEV \ 86 |USB_DEV_REQ_TYPE_CLASS \ 87 |USB_DEV_REQ_RCPT_OTHER) 88 89 #define GET_PORT_STATUS (USB_DEV_REQ_DEV_TO_HOST \ 90 |USB_DEV_REQ_TYPE_CLASS \ 91 |USB_DEV_REQ_RCPT_OTHER) 92 93 #define HUB_CLASS_REQ (USB_DEV_REQ_DEV_TO_HOST \ 94 |USB_DEV_REQ_TYPE_CLASS) 95 96 /* Port Status Field Bits - Table 11-15 */ 97 #define PORT_STATUS_CCS 0x0001 /* port connection status */ 98 #define PORT_STATUS_PES 0x0002 /* port enable status */ 99 #define PORT_STATUS_PSS 0x0004 /* port suspend status */ 100 #define PORT_STATUS_POCI 0x0008 /* port over current indicator */ 101 #define PORT_STATUS_PRS 0x0010 /* port reset status */ 102 #define PORT_STATUS_PPS 0x0100 /* port power status */ 103 #define PORT_STATUS_LSDA 0x0200 /* low speed device */ 104 #define PORT_STATUS_HSDA 0x0400 /* high speed device */ 105 #define PORT_STATUS_PIC 0x1000 /* port indicator control */ 106 107 #define PORT_STATUS_MASK 0x171f 108 #define PORT_STATUS_OK 0x103 /* connected, enabled, power */ 109 110 /* Port Change Field Bits - Table 11-16 */ 111 #define PORT_CHANGE_CSC 0x0001 /* connect status change */ 112 #define PORT_CHANGE_PESC 0x0002 /* port enable change */ 113 #define PORT_CHANGE_PSSC 0x0004 /* port suspend change */ 114 #define PORT_CHANGE_OCIC 0x0008 /* over current change */ 115 #define PORT_CHANGE_PRSC 0x0010 /* port reset change */ 116 117 #define PORT_CHANGE_MASK 0x001f 118 119 /* Hub status Field Bits - Table 11-14 */ 120 #define HUB_LOCAL_POWER_STATUS 0x0001 /* state of the power supply */ 121 #define HUB_OVER_CURRENT 0x0002 /* global hub OC condition */ 122 123 /* Hub change clear feature selectors - Table 11-15 */ 124 #define C_HUB_LOCAL_POWER_STATUS 0x0001 /* state of the power supply */ 125 #define C_HUB_OVER_CURRENT 0x0002 /* global hub OC condition */ 126 127 /* hub class feature selectors - Table 11-12 */ 128 #define CFS_C_HUB_LOCAL_POWER 0 129 #define CFS_C_HUB_OVER_CURRENT 1 130 #define CFS_PORT_CONNECTION 0 131 #define CFS_PORT_ENABLE 1 132 #define CFS_PORT_SUSPEND 2 133 #define CFS_PORT_OVER_CURRENT 3 134 #define CFS_PORT_RESET 4 135 #define CFS_PORT_POWER 8 136 #define CFS_PORT_LOW_SPEED 9 137 #define CFS_C_PORT_CONNECTION 16 138 #define CFS_C_PORT_ENABLE 17 139 #define CFS_C_PORT_SUSPEND 18 140 #define CFS_C_PORT_OVER_CURRENT 19 141 #define CFS_C_PORT_RESET 20 142 143 #ifdef __cplusplus 144 } 145 #endif 146 147 #endif /* _SYS_USB_HUB_H */ 148