1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved. 23 */ 24 #ifndef _STMF_H 25 #define _STMF_H 26 27 #include <sys/stmf_defines.h> 28 29 #ifdef __cplusplus 30 extern "C" { 31 #endif 32 33 typedef enum stmf_struct_id { 34 STMF_STRUCT_LU_PROVIDER = 1, 35 STMF_STRUCT_PORT_PROVIDER, 36 STMF_STRUCT_STMF_LOCAL_PORT, 37 STMF_STRUCT_STMF_LU, 38 STMF_STRUCT_SCSI_SESSION, 39 STMF_STRUCT_SCSI_TASK, 40 STMF_STRUCT_DATA_BUF, 41 STMF_STRUCT_DBUF_STORE, 42 STMF_MAX_STRUCT_IDS 43 } stmf_struct_id_t; 44 45 /* 46 * Provider callback commands 47 */ 48 #define STMF_PROVIDER_DATA_UPDATED 0x01 49 50 /* 51 * Provider callback flags 52 */ 53 #define STMF_PCB_STMF_ONLINING 0x0001 54 #define STMF_PCB_PREG_COMPLETE 0x0002 55 56 typedef void *data_seg_handle_t; 57 #define STMF_MAX_LU_CACHE_NTASKS 16 58 59 #define STMF_NO_HANDLE 0xffffffff 60 61 #define COMPANY_ID_NONE 0xFFFFFFFF 62 #define COMPANY_ID_SUN 0x00144F 63 64 /* 65 * The scatter/gather list buffer format is used in 2 different 66 * contexts within stmf: 67 * 1) supplied by the port provider that the LU provider uses to exchange 68 * data with the backing store. 69 * 2) supplied by the LU provider that the port provider uses exchange 70 * data with the host initiator. 71 * The second format is optionally supported by the port provided as 72 * indicated by the command task flags. 73 */ 74 75 typedef struct stmf_sglist_ent { 76 uint32_t seg_length; 77 uint8_t *seg_addr; 78 } stmf_sglist_ent_t; 79 80 typedef struct stmf_data_buf { 81 void *db_stmf_private; 82 void *db_port_private; 83 void *db_lu_private; 84 uint32_t db_buf_size; /* Total size of this buffer */ 85 uint32_t db_data_size; /* Intended xfer size of this buffer */ 86 uint32_t db_relative_offset; 87 uint16_t db_sglist_length; 88 uint16_t db_flags; /* Direction, auto status etc */ 89 stmf_status_t db_xfer_status; 90 uint8_t db_handle; /* To track parallel buffers */ 91 hrtime_t db_xfer_start_timestamp; 92 stmf_sglist_ent_t db_sglist[1]; /* PP scatter/gather list */ 93 } stmf_data_buf_t; 94 95 /* 96 * db_flags 97 */ 98 #define DB_DIRECTION_TO_RPORT 0x0001 99 #define DB_DIRECTION_FROM_RPORT 0x0002 100 #define DB_SEND_STATUS_GOOD 0x0004 101 #define DB_STATUS_GOOD_SENT 0x0008 102 #define DB_DONT_CACHE 0x0010 103 #define DB_DONT_REUSE 0x0020 104 #define DB_LU_DATA_BUF 0x0040 105 106 typedef struct scsi_task { 107 void *task_stmf_private; 108 void *task_port_private; 109 110 void *task_lu_private; 111 struct stmf_scsi_session *task_session; 112 struct stmf_local_port *task_lport; 113 struct stmf_lu *task_lu; 114 void *task_lu_itl_handle; /* Assigned by LU */ 115 116 /* CMD information from initiator */ 117 uint8_t task_lun_no[8]; 118 uint8_t task_flags; /* See def. for task flags */ 119 uint8_t task_priority; /* As per SAM-3 */ 120 uint8_t task_mgmt_function; /* If this is a TM request */ 121 uint8_t task_max_nbufs; 122 uint8_t task_cur_nbufs; 123 uint8_t task_csn_size; /* cmd seq no size in bits */ 124 uint16_t task_additional_flags; 125 uint32_t task_cmd_seq_no; 126 uint32_t task_expected_xfer_length; 127 uint32_t task_timeout; /* In seconds */ 128 uint16_t task_ext_id; 129 uint16_t task_cdb_length; 130 uint8_t *task_cdb; 131 132 /* Fields to manage data phase */ 133 uint32_t task_cmd_xfer_length; /* xfer len based on CDB */ 134 uint32_t task_nbytes_transferred; 135 uint32_t task_max_xfer_len; /* largest xfer allowed */ 136 uint32_t task_1st_xfer_len; /* 1st xfer hint */ 137 uint32_t task_copy_threshold; /* copy reduction threshold */ 138 139 140 /* Status Phase */ 141 stmf_status_t task_completion_status; 142 uint32_t task_resid; 143 uint8_t task_status_ctrl; /* See def. for status ctrl */ 144 uint8_t task_scsi_status; 145 uint16_t task_sense_length; 146 uint8_t *task_sense_data; 147 148 /* Misc. task data */ 149 void *task_extended_cmd; 150 151 } scsi_task_t; 152 153 /* 154 * Maximum expected transfer length. Can also be used when the transfer 155 * length is unknown when the task is allocated (e.g. SAS) 156 */ 157 158 #define TASK_MAX_XFER_LENGTH 0xFFFFFFFF 159 160 /* 161 * task_flags definitions. 162 */ 163 /* 164 * If TF_INITIAL_BURST is set, the dbuf passed with new_task() contains 165 * data from initial burst. Otherwise its just a buffer which the port 166 * passed to the LU. 167 */ 168 #define TF_INITIAL_BURST 0x80 169 /* Both READ_DATA and WRITE_DATA can be set for bidirectional xfers */ 170 #define TF_READ_DATA 0x40 171 #define TF_WRITE_DATA 0x20 172 #define TF_ATTR_MASK 0x07 173 #define TF_ATTR_UNTAGGED 0x0 174 #define TF_ATTR_SIMPLE_QUEUE 0x1 175 #define TF_ATTR_ORDERED_QUEUE 0x2 176 #define TF_ATTR_HEAD_OF_QUEUE 0x3 177 #define TF_ATTR_ACA 0x4 178 179 /* 180 * Task Management flags. 181 */ 182 #define TM_NONE 0x00 183 #define TM_ABORT_TASK 0x01 184 #define TM_ABORT_TASK_SET 0x02 185 #define TM_CLEAR_ACA 0x03 186 #define TM_CLEAR_TASK_SET 0x04 187 #define TM_LUN_RESET 0x05 188 #define TM_TARGET_WARM_RESET 0x06 189 #define TM_TARGET_COLD_RESET 0x07 190 #define TM_TASK_REASSIGN 0x08 191 #define TM_TARGET_RESET 0x09 192 #define TM_QUERY_TASK 0x0A 193 194 /* 195 * additional flags 196 */ 197 #define TASK_AF_ENABLE_COMP_CONF 0x01 198 #define TASK_AF_PORT_LOAD_HIGH 0x02 199 #define TASK_AF_NO_EXPECTED_XFER_LENGTH 0x04 200 /* 201 * PP sets this flag if it can process dbufs created by the LU. 202 */ 203 #define TASK_AF_ACCEPT_LU_DBUF 0x08 204 205 /* 206 * scsi_task_t extension identifiers 207 */ 208 #define STMF_TASK_EXT_NONE 0 209 210 /* 211 * max_nbufs 212 */ 213 #define STMF_BUFS_MAX 255 214 215 /* 216 * Task status ctrl 217 */ 218 #define TASK_SCTRL_OVER 1 219 #define TASK_SCTRL_UNDER 2 220 221 /* 222 * The flags used by I/O flow. 223 */ 224 #define STMF_IOF_LU_DONE 0x0001 225 #define STMF_IOF_LPORT_DONE 0x0002 226 #define STMF_IOF_STATS_ONLY 0x0004 227 228 /* 229 * struct allocation flags 230 */ 231 #define AF_FORCE_NOSLEEP 0x0001 232 #define AF_DONTZERO 0x0002 233 234 typedef struct stmf_state_change_info { 235 uint64_t st_rflags; /* Reason behind this change */ 236 char *st_additional_info; 237 } stmf_state_change_info_t; 238 239 typedef struct stmf_change_status { 240 stmf_status_t st_completion_status; 241 char *st_additional_info; 242 } stmf_change_status_t; 243 244 /* 245 * conditions causing or affecting the change. 246 */ 247 #define STMF_RFLAG_USER_REQUEST 0x0001 248 #define STMF_RFLAG_FATAL_ERROR 0x0002 249 #define STMF_RFLAG_STAY_OFFLINED 0x0004 250 #define STMF_RFLAG_RESET 0x0008 251 #define STMF_RFLAG_COLLECT_DEBUG_DUMP 0x0010 252 #define STMF_RFLAG_LU_ABORT 0x0020 253 #define STMF_RFLAG_LPORT_ABORT 0x0040 254 255 #define STMF_CHANGE_INFO_LEN 160 256 257 /* 258 * cmds to stmf_abort entry point 259 */ 260 #define STMF_QUEUE_TASK_ABORT 1 261 #define STMF_REQUEUE_TASK_ABORT_LPORT 2 262 #define STMF_REQUEUE_TASK_ABORT_LU 3 263 #define STMF_QUEUE_ABORT_LU 4 264 265 /* 266 * cmds to be used by stmf ctl 267 */ 268 #define STMF_CMD_LU_OP 0x0100 269 #define STMF_CMD_LPORT_OP 0x0200 270 #define STMF_CMD_MASK 0x00ff 271 #define STMF_CMD_ONLINE 0x0001 272 #define STMF_CMD_OFFLINE 0x0002 273 #define STMF_CMD_GET_STATUS 0x0003 274 #define STMF_CMD_ONLINE_COMPLETE 0x0004 275 #define STMF_CMD_OFFLINE_COMPLETE 0x0005 276 #define STMF_ACK_ONLINE_COMPLETE 0x0006 277 #define STMF_ACK_OFFLINE_COMPLETE 0x0007 278 279 #define STMF_CMD_LU_ONLINE (STMF_CMD_LU_OP | STMF_CMD_ONLINE) 280 #define STMF_CMD_LU_OFFLINE (STMF_CMD_LU_OP | STMF_CMD_OFFLINE) 281 #define STMF_CMD_LPORT_ONLINE (STMF_CMD_LPORT_OP | STMF_CMD_ONLINE) 282 #define STMF_CMD_LPORT_OFFLINE (STMF_CMD_LPORT_OP | STMF_CMD_OFFLINE) 283 #define STMF_CMD_GET_LU_STATUS (STMF_CMD_LU_OP | STMF_CMD_GET_STATUS) 284 #define STMF_CMD_GET_LPORT_STATUS \ 285 (STMF_CMD_LPORT_OP | STMF_CMD_GET_STATUS) 286 #define STMF_CMD_LU_ONLINE_COMPLETE \ 287 (STMF_CMD_LU_OP | STMF_CMD_ONLINE_COMPLETE) 288 #define STMF_CMD_LPORT_ONLINE_COMPLETE \ 289 (STMF_CMD_LPORT_OP | STMF_CMD_ONLINE_COMPLETE) 290 #define STMF_ACK_LU_ONLINE_COMPLETE \ 291 (STMF_CMD_LU_OP | STMF_ACK_ONLINE_COMPLETE) 292 #define STMF_ACK_LPORT_ONLINE_COMPLETE \ 293 (STMF_CMD_LPORT_OP | STMF_ACK_ONLINE_COMPLETE) 294 #define STMF_CMD_LU_OFFLINE_COMPLETE \ 295 (STMF_CMD_LU_OP | STMF_CMD_OFFLINE_COMPLETE) 296 #define STMF_CMD_LPORT_OFFLINE_COMPLETE \ 297 (STMF_CMD_LPORT_OP | STMF_CMD_OFFLINE_COMPLETE) 298 #define STMF_ACK_LU_OFFLINE_COMPLETE \ 299 (STMF_CMD_LU_OP | STMF_ACK_OFFLINE_COMPLETE) 300 #define STMF_ACK_LPORT_OFFLINE_COMPLETE \ 301 (STMF_CMD_LPORT_OP | STMF_ACK_OFFLINE_COMPLETE) 302 /* 303 * For LPORTs and LUs to create their own ctl cmds which dont 304 * conflict with stmf ctl cmds. 305 */ 306 #define STMF_LPORT_CTL_CMDS 0x1000 307 #define STMF_LU_CTL_CMDS 0x2000 308 309 /* 310 * Commands for various info routines. 311 */ 312 /* Command classifiers */ 313 #define SI_LPORT 0x1000000 314 #define SI_STMF 0x2000000 315 #define SI_LU 0x4000000 316 #define SI_LPORT_FC 0x0000000 317 #define SI_LPORT_ISCSI 0x0010000 318 #define SI_LPORT_SAS 0x0020000 319 #define SI_STMF_LU 0x0010000 320 #define SI_STMF_LPORT 0x0020000 321 322 #define SI_GET_CLASS(v) ((v) & 0xFF000000) 323 #define SI_GET_SUBCLASS(v) ((v) & 0x00FF0000) 324 325 /* Commands for LPORT info routines */ 326 /* XXX - Implement these. */ 327 #if 0 328 #define SI_LPORT_FC_PORTINFO (SI_LPORT | SI_LPORT_FC | 1) 329 #define SI_RPORT_FC_PORTINFO (SI_LPORT | SI_LPORT_FC | 2) 330 #endif 331 332 /* 333 * Events 334 */ 335 #define STMF_EVENT_ALL ((int)-1) 336 #define LPORT_EVENT_INITIAL_LUN_MAPPED 0 337 338 /* 339 * This needs to go into common/ddi/sunddi.h 340 */ 341 #define DDI_NT_STMF "ddi_scsi_target:framework" 342 #define DDI_NT_STMF_LP "ddi_scsi_target:lu_provider" 343 #define DDI_NT_STMF_PP "ddi_scsi_target:port_provider" 344 345 /* 346 * VPD page bits. 347 */ 348 #define STMF_VPD_LU_ID 0x01 349 #define STMF_VPD_TARGET_ID 0x02 350 #define STMF_VPD_TP_GROUP 0x04 351 #define STMF_VPD_RELATIVE_TP_ID 0x08 352 353 /* 354 * Common macros to simplify coding 355 */ 356 #define STMF_SEC2TICK(x_sec) (drv_usectohz((x_sec) * 1000000)) 357 358 void stmf_trace(caddr_t ident, const char *fmt, ...); 359 void *stmf_alloc(stmf_struct_id_t sid, int additional_size, int alloc_flags); 360 void stmf_free(void *struct_ptr); 361 struct scsi_task *stmf_task_alloc(struct stmf_local_port *lport, 362 struct stmf_scsi_session *ss, uint8_t *lun, uint16_t cdb_length, 363 uint16_t ext_id); 364 void stmf_post_task(scsi_task_t *task, stmf_data_buf_t *dbuf); 365 stmf_data_buf_t *stmf_alloc_dbuf(scsi_task_t *task, uint32_t size, 366 uint32_t *pminsize, uint32_t flags); 367 void stmf_free_dbuf(scsi_task_t *task, stmf_data_buf_t *dbuf); 368 stmf_status_t stmf_setup_dbuf(scsi_task_t *task, stmf_data_buf_t *dbuf, 369 uint32_t flags); 370 void stmf_teardown_dbuf(scsi_task_t *task, stmf_data_buf_t *dbuf); 371 stmf_status_t stmf_xfer_data(scsi_task_t *task, stmf_data_buf_t *dbuf, 372 uint32_t ioflags); 373 stmf_status_t stmf_send_scsi_status(scsi_task_t *task, uint32_t ioflags); 374 void stmf_data_xfer_done(scsi_task_t *task, stmf_data_buf_t *dbuf, 375 uint32_t iof); 376 void stmf_send_status_done(scsi_task_t *task, stmf_status_t s, uint32_t iof); 377 void stmf_task_lu_done(scsi_task_t *task); 378 void stmf_abort(int abort_cmd, scsi_task_t *task, stmf_status_t s, void *arg); 379 void stmf_task_lu_aborted(scsi_task_t *task, stmf_status_t s, uint32_t iof); 380 void stmf_task_lport_aborted(scsi_task_t *task, stmf_status_t s, uint32_t iof); 381 stmf_status_t stmf_task_poll_lu(scsi_task_t *task, uint32_t timeout); 382 stmf_status_t stmf_task_poll_lport(scsi_task_t *task, uint32_t timeout); 383 stmf_status_t stmf_ctl(int cmd, void *obj, void *arg); 384 stmf_status_t stmf_register_itl_handle(struct stmf_lu *lu, uint8_t *lun, 385 struct stmf_scsi_session *ss, uint64_t session_id, void *itl_handle); 386 stmf_status_t stmf_deregister_itl_handle(struct stmf_lu *lu, uint8_t *lun, 387 struct stmf_scsi_session *ss, uint64_t session_id, void *itl_handle); 388 stmf_status_t stmf_deregister_all_lu_itl_handles(struct stmf_lu *lu); 389 stmf_status_t stmf_get_itl_handle(struct stmf_lu *lu, uint8_t *lun, 390 struct stmf_scsi_session *ss, uint64_t session_id, void **itl_handle_retp); 391 stmf_data_buf_t *stmf_handle_to_buf(scsi_task_t *task, uint8_t h); 392 stmf_status_t stmf_lu_add_event(struct stmf_lu *lu, int eventid); 393 stmf_status_t stmf_lu_remove_event(struct stmf_lu *lu, int eventid); 394 stmf_status_t stmf_lport_add_event(struct stmf_local_port *lport, int eventid); 395 stmf_status_t stmf_lport_remove_event(struct stmf_local_port *lport, 396 int eventid); 397 void stmf_wwn_to_devid_desc(struct scsi_devid_desc *sdid, uint8_t *wwn, 398 uint8_t protocol_id); 399 stmf_status_t stmf_scsilib_uniq_lu_id(uint32_t company_id, 400 struct scsi_devid_desc *lu_id); 401 stmf_status_t stmf_scsilib_uniq_lu_id2(uint32_t company_id, uint32_t host_id, 402 struct scsi_devid_desc *lu_id); 403 void stmf_scsilib_send_status(scsi_task_t *task, uint8_t st, uint32_t saa); 404 uint32_t stmf_scsilib_prepare_vpd_page83(scsi_task_t *task, uint8_t *page, 405 uint32_t page_len, uint8_t byte0, uint32_t vpd_mask); 406 uint16_t stmf_scsilib_get_lport_rtid(struct scsi_devid_desc *devid); 407 struct scsi_devid_desc *stmf_scsilib_get_devid_desc(uint16_t rtpid); 408 void stmf_scsilib_handle_report_tpgs(scsi_task_t *task, stmf_data_buf_t *dbuf); 409 void stmf_scsilib_handle_task_mgmt(scsi_task_t *task); 410 411 #ifdef __cplusplus 412 } 413 #endif 414 415 #endif /* _STMF_H */ 416