1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 1990, 2010, Oracle and/or its affiliates. All rights reserved. 24 * 25 * Copyright 2011 Nexenta Systems, Inc. All rights reserved. 26 */ 27 28 #ifndef _SYS_SCSI_GENERIC_COMMANDS_H 29 #define _SYS_SCSI_GENERIC_COMMANDS_H 30 31 #ifdef __cplusplus 32 extern "C" { 33 #endif 34 35 /* 36 * Standard SCSI Command Definitions 37 * 38 * Macros to determine known command sizes 39 */ 40 #define CDB_GROUPID(cmd) ((cmd >> 5) & 0x7) 41 #define CDB_GROUPID_0 0 42 #define CDB_GROUPID_1 1 43 #define CDB_GROUPID_2 2 44 #define CDB_GROUPID_3 3 45 #define CDB_GROUPID_4 4 46 #define CDB_GROUPID_5 5 47 #define CDB_GROUPID_6 6 48 #define CDB_GROUPID_7 7 49 50 #define CDB_GROUP0 6 /* 6-byte cdb's */ 51 #define CDB_GROUP1 10 /* 10-byte cdb's */ 52 #define CDB_GROUP2 10 /* 10-byte cdb's */ 53 #define CDB_GROUP3 0 /* reserved */ 54 #define CDB_GROUP4 16 /* 16-byte cdb's */ 55 #define CDB_GROUP5 12 /* 12-byte cdb's */ 56 #define CDB_GROUP6 0 /* reserved */ 57 #define CDB_GROUP7 0 /* reserved */ 58 59 /* 60 * Generic Command Definitions 61 * NOTE: CDROM commands are defined in cdio.h 62 */ 63 64 /* 65 * Group 0 Commands (CDB range 0x00 - 0x1F) 66 */ 67 #define SCMD_GROUP0 0x00 68 69 /* 70 * Group 0 commands, All Devices 71 */ 72 #define SCMD_TEST_UNIT_READY 0x00 73 #define SCMD_REQUEST_SENSE 0x03 74 #define SCMD_INQUIRY 0x12 75 #define SCMD_COPY 0x18 76 #define SCMD_GDIAG 0x1C /* receive diagnostic results */ 77 #define SCMD_SDIAG 0x1D /* send diagnostic results */ 78 79 /* 80 * Group 0 commands, Direct Access Devices 81 */ 82 /* SCMD_TEST_UNIT_READY 0x00 */ 83 #define SCMD_REZERO_UNIT 0x01 84 /* SCMD_REQUEST_SENSE 0x03 */ 85 #define SCMD_FORMAT 0x04 86 #define SCMD_REASSIGN_BLOCK 0x07 87 #define SCMD_READ 0x08 88 #define SCMD_WRITE 0x0a 89 #define SCMD_SEEK 0x0b 90 /* SCMD_INQUIRY 0x12 */ 91 #define SCMD_MODE_SELECT 0x15 92 #define SCMD_RESERVE 0x16 93 #define SCMD_RELEASE 0x17 94 /* SCMD_COPY 0x18 */ 95 #define SCMD_MODE_SENSE 0x1a 96 #define SCMD_START_STOP 0x1b 97 /* SCMD_GDIAG 0x1C */ 98 /* SCMD_SDIAG 0x1D */ 99 #define SCMD_DOORLOCK 0x1E /* Prevent/Allow Medium Removal */ 100 101 /* 102 * Group 0 commands, Sequential Access Devices 103 */ 104 /* SCMD_TEST_UNIT_READY 0x00 */ 105 #define SCMD_REWIND 0x01 /* Note similarity to SCMD_REZERO */ 106 /* SCMD_REQUEST_SENSE 0x03 */ 107 #define SCMD_READ_BLKLIM 0x05 108 /* SCMD_READ 0x08 */ 109 /* SCMD_WRITE 0x0a */ 110 #define SCMD_TRK_SEL 0x0b /* Note similarity to SCMD_SEEK */ 111 #define SCMD_READ_REVERSE 0x0f 112 #define SCMD_WRITE_FILE_MARK 0x10 113 #define SCMD_SPACE 0x11 114 /* SCMD_INQUIRY 0x12 */ 115 #define SCMD_VERIFY_G0 0x13 116 #define SCMD_RECOVER_BUF 0x14 117 /* SCMD_MODE_SELECT 0x15 */ 118 /* SCMD_RESERVE 0x16 */ 119 /* SCMD_RELEASE 0x17 */ 120 /* SCMD_COPY 0x18 */ 121 #define SCMD_ERASE 0x19 122 /* SCMD_MODE_SENSE 0x1a */ 123 #define SCMD_LOAD 0x1b /* Note similarity to SCMD_START_STOP */ 124 /* SCMD_GDIAG 0x1c */ 125 /* SCMD_SDIAG 0x1d */ 126 /* SCMD_DOORLOCK 0x1e */ 127 128 129 /* 130 * Group 0 commands, Printer Devices 131 */ 132 /* SCMD_TEST_UNIT_READY 0x00 */ 133 /* SCMD_REQUEST_SENSE 0x03 */ 134 /* SCMD_FORMAT 0x04 */ 135 #define SCMD_PRINT 0x0a /* Note similarity to SCMD_WRITE */ 136 #define SCMD_SLEW_PRINT 0x0b /* ? similar to SCMD_SEEK ? */ 137 #define SCMD_FLUSH_PRINT_BUF 0x10 /* ? similar to SCMD_WRITE_FILE_MARK */ 138 /* SCMD_INQUIRY 0x12 */ 139 /* SCMD_RECOVER_BUF 0x14 */ 140 /* SCMD_MODE_SELECT 0x15 */ 141 /* SCMD_RESERVE 0x16 */ 142 /* SCMD_RELEASE 0x17 */ 143 /* SCMD_COPY 0x18 */ 144 /* SCMD_MODE_SENSE 0x1a */ 145 #define SCMD_STOP_PRINT 0x1b /* Note similarity to SCMD_START_STOP */ 146 /* SCMD_GDIAG 0x1c */ 147 /* SCMD_SDIAG 0x1d */ 148 149 /* 150 * Group 0 commands, Processor Devices 151 */ 152 /* SCMD_TEST_UNIT_READY 0x00 */ 153 /* SCMD_REQUEST_SENSE 0x03 */ 154 #define SCMD_RECEIVE 0x08 /* Note similarity to SCMD_READ */ 155 #define SCMD_SEND 0x0a /* Note similarity to SCMD_WRITE */ 156 /* SCMD_INQUIRY 0x12 */ 157 /* SCMD_COPY 0x18 */ 158 /* SCMD_MODE_SENSE 0x1a */ 159 /* SCMD_GDIAG 0x1c */ 160 /* SCMD_SDIAG 0x1d */ 161 162 /* 163 * Group 0 commands, WORM Devices 164 */ 165 /* SCMD_TEST_UNIT_READY 0x00 */ 166 /* SCMD_REZERO_UNIT 0x01 */ 167 /* SCMD_REQUEST_SENSE 0x03 */ 168 /* SCMD_REASSIGN_BLOCK 0x07 */ 169 /* SCMD_READ 0x08 */ 170 /* SCMD_WRITE 0x0a */ 171 /* SCMD_SEEK 0x0b */ 172 /* SCMD_INQUIRY 0x12 */ 173 /* SCMD_MODE_SELECT 0x15 */ 174 /* SCMD_RESERVE 0x16 */ 175 /* SCMD_RELEASE 0x17 */ 176 /* SCMD_COPY 0x18 */ 177 /* SCMD_MODE_SENSE 0x1a */ 178 /* SCMD_START_STOP 0x1b */ 179 /* SCMD_GDIAG 0x1C */ 180 /* SCMD_SDIAG 0x1D */ 181 /* SCMD_DOORLOCK 0x1E */ 182 183 /* 184 * Group 0 commands, Read Only Devices 185 */ 186 /* SCMD_TEST_UNIT_READY 0x00 */ 187 /* SCMD_REZERO_UNIT 0x01 */ 188 /* SCMD_REQUEST_SENSE 0x03 */ 189 /* SCMD_REASSIGN_BLOCK 0x07 */ 190 /* SCMD_READ 0x08 */ 191 /* SCMD_SEEK 0x0b */ 192 /* SCMD_INQUIRY 0x12 */ 193 /* SCMD_MODE_SELECT 0x15 */ 194 /* SCMD_RESERVE 0x16 */ 195 /* SCMD_RELEASE 0x17 */ 196 /* SCMD_COPY 0x18 */ 197 /* SCMD_MODE_SENSE 0x1a */ 198 /* SCMD_START_STOP 0x1b */ 199 /* SCMD_GDIAG 0x1C */ 200 /* SCMD_SDIAG 0x1D */ 201 /* SCMD_DOORLOCK 0x1E */ 202 203 /* 204 * Group 1 Commands (CDB range 0x20 - 0x3F) 205 */ 206 #define SCMD_GROUP1 0x20 207 208 /* 209 * Group 1 Commands, All Devices 210 */ 211 #define SCMD_COMPARE 0x39 212 #define SCMD_COPY_VERIFY 0x3A 213 #define SCMD_PERSISTENT_RESERVE_IN 0x5E 214 #define SCMD_PERSISTENT_RESERVE_OUT 0x5F 215 #define SCMD_PRIN SCMD_PERSISTENT_RESERVE_IN 216 #define SCMD_PROUT SCMD_PERSISTENT_RESERVE_OUT 217 218 /* 219 * Group 1 Commands, Direct Access Devices 220 */ 221 #define SCMD_READ_FORMAT_CAP 0x23 222 #define SCMD_READ_CAPACITY 0x25 223 #define SCMD_READ_G1 0x28 /* Note that only the group changed */ 224 #define SCMD_WRITE_G1 0x2a /* Note that only the group changed */ 225 #define SCMD_SEEK_G1 0x2b /* Note that only the group changed */ 226 #define SCMD_WRITE_VERIFY 0x2e 227 #define SCMD_VERIFY 0x2f 228 #define SCMD_SEARCH_HIGH 0x30 229 #define SCMD_SEARCH_EQUAL 0x31 230 #define SCMD_SEARCH_LOW 0x32 231 #define SCMD_SET_LIMITS 0x33 232 #define SCMD_SYNCHRONIZE_CACHE 0x35 233 #define SCMD_READ_DEFECT_LIST 0x37 234 #define SCMD_WRITE_BUFFER 0x3B 235 #define SCMD_READ_BUFFER 0x3c 236 #define SCMD_READ_LONG 0x3E 237 #define SCMD_WRITE_LONG 0x3F 238 #define SCMD_WRITE_SAME_G1 0x41 239 #define SCMD_UNMAP 0x42 240 #define SCMD_GET_CONFIGURATION 0x46 241 #define SCMD_LOG_SELECT_G1 0x4c 242 #define SCMD_LOG_SENSE_G1 0x4d 243 #define SCMD_RESERVE_G1 0x56 244 #define SCMD_RELEASE_G1 0x57 245 #define SCMD_MODE_SELECT_G1 0x55 246 #define SCMD_MODE_SENSE_G1 0x5A 247 248 249 /* 250 * Group 1 Commands, Sequential Access Devices 251 */ 252 #define SCMD_LOCATE 0x2B /* Note similarity to SCMD_SEEK_G1 */ 253 #define SCMD_READ_POSITION 0x34 254 #define SCMD_REPORT_DENSITIES 0x44 255 256 /* 257 * Group 1 Commands, Printer Devices 258 */ 259 /* (None Defined) */ 260 261 /* 262 * Group 1 Commands, Processor Devices 263 */ 264 /* (None Defined) */ 265 266 /* 267 * Group 1 Commands, WORM Devices 268 */ 269 /* SCMD_READ_CAPACITY 0x25 */ 270 /* SCMD_READ_G1 0x28 */ 271 /* SCMD_WRITE_G1 0x2a */ 272 /* SCMD_SEEK_G1 0x2b */ 273 /* SCMD_WRITE_VERIFY 0x2e */ 274 /* SCMD_VERIFY 0x2f */ 275 /* SCMD_SEARCH_HIGH 0x30 */ 276 /* SCMD_SEARCH_EQUAL 0x31 */ 277 /* SCMD_SEARCH_LOW 0x32 */ 278 /* SCMD_SET_LIMITS 0x33 */ 279 280 /* 281 * Group 1 Commands, Read Only Devices 282 */ 283 /* SCMD_READ_CAPACITY 0x25 */ 284 /* SCMD_READ_G1 0x28 */ 285 /* SCMD_SEEK_G1 0x2b */ 286 /* SCMD_VERIFY 0x2f */ 287 /* SCMD_SEARCH_HIGH 0x30 */ 288 /* SCMD_SEARCH_EQUAL 0x31 */ 289 /* SCMD_SEARCH_LOW 0x32 */ 290 /* SCMD_SET_LIMITS 0x33 */ 291 292 /* 293 * Group 1 Commands, MMC Devices 294 */ 295 296 /* GET EVENT STATUS NOTIFICATION, MMC-3 5.6 */ 297 #define SCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a 298 299 /* event header */ 300 #define SD_GESN_HEADER_LEN 4 301 #define SD_GESN_HEADER_NEA 0x80 /* byte 2 */ 302 #define SD_GESN_HEADER_CLASS 0x07 /* byte 2 */ 303 304 /* media class event class and event data that follows the header */ 305 #define SD_GESN_MEDIA_CLASS 4 306 307 #define SD_GESN_MEDIA_DATA_LEN 4 308 #define SD_GESN_MEDIA_EVENT_CODE 0x0f /* byte 0 */ 309 #define SD_GESN_MEDIA_EVENT_STATUS_PRESENT 0x02 /* byte 1 */ 310 #define SD_GESN_MEDIA_EVENT_STATUS_TRAY_OPEN 0x01 /* byte 1 */ 311 312 /* media event code */ 313 #define SD_GESN_MEDIA_EVENT_NOCHG 0 314 #define SD_GESN_MEDIA_EVENT_EJECTREQUEST 1 315 #define SD_GESN_MEDIA_EVENT_NEWMEDIA 2 316 #define SD_GESN_MEDIA_EVENT_MEDIAREMOVAL 3 317 #define SD_GESN_MEDIA_EVENT_MEDIACHANGED 4 318 #define SD_GESN_MEDIA_EVENT_BGFORMATCOMPLETED 5 319 #define SD_GESN_MEDIA_EVENT_BGFORMATRESTARTED 6 320 321 322 /* 323 * Group 3 Commands 324 */ 325 #define SCMD_VAR_LEN 0x7f 326 327 /* 328 * Group 4 Commands, All Devices 329 */ 330 #define SCMD_GROUP4 0x80 331 #define SCMD_EXTENDED_COPY 0x83 332 #define SCMD_VERIFY_G4 0x8f 333 334 /* 335 * Group 4 Commands, Direct Access Devices 336 */ 337 #define SCMD_READ_G4 0x88 338 #define SCMD_WRITE_G4 0x8a 339 #define SCMD_WRITE_VERIFY_G4 0x8e 340 #define SCMD_WRITE_SAME_G4 0x93 341 #define SCMD_SVC_ACTION_IN_G4 0x9e 342 #define SCMD_SVC_ACTION_OUT_G4 0x9f 343 344 /* 345 * Group 4 Service Actions for Service Action In (16) 346 */ 347 #define SSVC_ACTION_READ_CAPACITY_G4 0x10 348 #define SSVC_ACTION_READ_LONG_G4 0x11 349 350 /* 351 * Group 4 Service Actions for Service Action Out (16) 352 */ 353 #define SSVC_ACTION_WRITE_LONG_G4 0x11 354 355 /* 356 * Group 4 Commands, Sequential Access Devics 357 */ 358 #define SCMD_WRITE_FILE_MARK_G4 0x80 359 #define SCMD_READ_REVERSE_G4 0x81 360 #define SCMD_READ_ATTRIBUTE 0x8c 361 #define SCMD_WRITE_ATTRIBUTE 0x8d 362 #define SCMD_SPACE_G4 0x91 363 #define SCMD_LOCATE_G4 0x92 364 365 /* 366 * Group 5 commands. 367 */ 368 #define SCMD_GROUP5 0xA0 369 #define SCMD_REPORT_LUNS 0xA0 370 #define SCMD_SECURITY_PROTO_IN 0xA2 371 #define SCMD_MAINTENANCE_IN 0xA3 372 #define SCMD_MAINTENANCE_OUT 0xA4 373 #define SCMD_READ_G5 0xA8 374 #define SCMD_WRITE_G5 0xAA 375 #define SCMD_SVC_ACTION_OUT_G5 0xA9 376 #define SCMD_SVC_ACTION_IN_G5 0xAB 377 #define SCMD_GET_PERFORMANCE 0xAC 378 #define SCMD_WRITE_VERIFY_G5 0xAE 379 #define SCMD_VERIFY_G5 0xAF 380 #define SCMD_SECURITY_PROTO_OUT 0xB5 381 382 /* 383 * Group 5 Service Actions for Maintenance In (12) 384 */ 385 #define SSVC_ACTION_GET_TARGET_PORT_GROUPS 0x0a 386 #define SSVC_ACTION_GET_SUPPORTED_OPERATIONS 0x0c 387 #define SSVC_SCTION_GET_SUPPORTED_MANAGEMENT 0x0d 388 #define SSVC_ACTION_GET_TIMESTAMP 0x0f 389 390 /* 391 * Group 5 Service Actions for Maintenance Out (12) 392 */ 393 #define SSVC_ACTION_SET_DEVICE_IDENTIFIER 0x06 394 #define SSVC_ACTION_SET_PRIORITY 0x0e 395 #define SSVC_ACTION_SET_TARGET_PORT_GROUPS 0x0a 396 #define SSVC_ACTION_SET_TIMESTAMP 0x0f 397 398 /* 399 * Group 5 Service Actions for Service Action In (12) 400 */ 401 #define SSVC_ACTION_READ_MEDIA_SERIAL 0x01 402 /* 403 * scsi_key_strings for SCMD_ definitions 404 * NOTE: see SCSI_CMDS_KEY_STRINGS_CDIO in cdio.h for additional 405 * command-to-string translations. 406 */ 407 #define SCSI_CMDS_KEY_STRINGS \ 408 /* 0x00 */ SCMD_TEST_UNIT_READY, "test_unit_ready", \ 409 /* 0x01 */ SCMD_REWIND | \ 410 SCMD_REZERO_UNIT, "rezero/rewind", \ 411 /* 0x03 */ SCMD_REQUEST_SENSE, "request_sense", \ 412 /* 0x04 */ SCMD_FORMAT, "format", \ 413 /* 0x05 */ SCMD_READ_BLKLIM, "read_block_limits", \ 414 /* 0x07 */ SCMD_REASSIGN_BLOCK, "reassign", \ 415 /* 0x08 */ SCMD_READ | \ 416 SCMD_RECEIVE, "read", \ 417 /* 0x0a */ SCMD_PRINT | \ 418 SCMD_SEND | \ 419 SCMD_WRITE, "write", \ 420 /* 0x0b */ SCMD_SEEK | \ 421 SCMD_SLEW_PRINT | \ 422 SCMD_TRK_SEL, "seek", \ 423 /* 0x0f */ SCMD_READ_REVERSE, "read_reverse", \ 424 /* 0x10 */ SCMD_WRITE_FILE_MARK | \ 425 SCMD_FLUSH_PRINT_BUF, "write_file_mark", \ 426 /* 0x11 */ SCMD_SPACE, "space", \ 427 /* 0x12 */ SCMD_INQUIRY, "inquiry", \ 428 /* 0x13 */ SCMD_VERIFY_G0, "verify", \ 429 /* 0x14 */ SCMD_RECOVER_BUF, "recover_buffer_data", \ 430 /* 0x15 */ SCMD_MODE_SELECT, "mode_select", \ 431 /* 0x16 */ SCMD_RESERVE, "reserve", \ 432 /* 0x17 */ SCMD_RELEASE, "release", \ 433 /* 0x18 */ SCMD_COPY, "copy", \ 434 /* 0x19 */ SCMD_ERASE, "erase_tape", \ 435 /* 0x1a */ SCMD_MODE_SENSE, "mode_sense", \ 436 /* 0x1b */ SCMD_LOAD | \ 437 SCMD_START_STOP | \ 438 SCMD_STOP_PRINT, "load/start/stop", \ 439 /* 0x1c */ SCMD_GDIAG, "get_diagnostic_results", \ 440 /* 0x1d */ SCMD_SDIAG, "send_diagnostic_command", \ 441 /* 0x1e */ SCMD_DOORLOCK, "door_lock", \ 442 /* 0x23 */ SCMD_READ_FORMAT_CAP, "read_format_capacity", \ 443 /* 0x25 */ SCMD_READ_CAPACITY, "read_capacity", \ 444 /* 0x28 */ SCMD_READ_G1, "read(10)", \ 445 /* 0x2a */ SCMD_WRITE_G1, "write(10)", \ 446 /* 0x2b */ SCMD_SEEK_G1 | \ 447 SCMD_LOCATE, "seek(10)", \ 448 /* 0x2e */ SCMD_WRITE_VERIFY, "write_verify", \ 449 /* 0x2f */ SCMD_VERIFY, "verify(10)", \ 450 /* 0x30 */ SCMD_SEARCH_HIGH, "search_data_high", \ 451 /* 0x31 */ SCMD_SEARCH_EQUAL, "search_data_equal", \ 452 /* 0x32 */ SCMD_SEARCH_LOW, "search_data_low", \ 453 /* 0x33 */ SCMD_SET_LIMITS, "set_limits", \ 454 /* 0x34 */ SCMD_READ_POSITION, "read_position", \ 455 /* 0x35 */ SCMD_SYNCHRONIZE_CACHE, "synchronize_cache", \ 456 /* 0x37 */ SCMD_READ_DEFECT_LIST, "read_defect_data", \ 457 /* 0x39 */ SCMD_COMPARE, "compare", \ 458 /* 0x3a */ SCMD_COPY_VERIFY, "copy_verify", \ 459 /* 0x3b */ SCMD_WRITE_BUFFER, "write_buffer", \ 460 /* 0x3c */ SCMD_READ_BUFFER, "read_buffer", \ 461 /* 0x3e */ SCMD_READ_LONG, "read_long", \ 462 /* 0x3f */ SCMD_WRITE_LONG, "write_long", \ 463 /* 0x41 */ SCMD_WRITE_SAME_G1, "write_same(10)", \ 464 /* 0x42 */ SCMD_UNMAP, "unmap", \ 465 /* 0x44 */ SCMD_REPORT_DENSITIES | \ 466 /* SCMD_READ_HEADER (from cdio.h) | */ \ 467 0, "report_densities/read_header", \ 468 /* 0x46 */ SCMD_GET_CONFIGURATION, "get_configuration", \ 469 /* 0x4c */ SCMD_LOG_SELECT_G1, "log_select", \ 470 /* 0x4d */ SCMD_LOG_SENSE_G1, "log_sense", \ 471 /* 0x55 */ SCMD_MODE_SELECT_G1, "mode_select(10)", \ 472 /* 0x56 */ SCMD_RESERVE_G1, "reserve(10)", \ 473 /* 0x57 */ SCMD_RELEASE_G1, "release(10)", \ 474 /* 0x5a */ SCMD_MODE_SENSE_G1, "mode_sense(10)", \ 475 /* 0x5e */ SCMD_PERSISTENT_RESERVE_IN, "persistent_reserve_in", \ 476 /* 0x5f */ SCMD_PERSISTENT_RESERVE_OUT, "persistent_reserve_out", \ 477 /* 0x80 */ SCMD_WRITE_FILE_MARK_G4, "write_file_mark(16)", \ 478 /* 0x81 */ SCMD_READ_REVERSE_G4, "read_reverse(16)", \ 479 /* 0x83 */ SCMD_EXTENDED_COPY, "extended_copy", \ 480 /* 0x88 */ SCMD_READ_G4, "read(16)", \ 481 /* 0x8a */ SCMD_WRITE_G4, "write(16)", \ 482 /* 0x8c */ SCMD_READ_ATTRIBUTE, "read_attribute", \ 483 /* 0x8d */ SCMD_WRITE_ATTRIBUTE, "write_attribute", \ 484 /* 0x8e */ SCMD_WRITE_VERIFY_G4, "write_verify(16)", \ 485 /* 0x8f */ SCMD_VERIFY_G4, "verify(16)", \ 486 /* 0x91 */ SCMD_SPACE_G4, "space(16)", \ 487 /* 0x92 */ SCMD_LOCATE_G4, "locate(16)", \ 488 /* 0x92 */ SCMD_WRITE_SAME_G4, "write_same(16)", \ 489 /* 0x9e */ SCMD_SVC_ACTION_IN_G4, "service_action_in(16)", \ 490 /* 0x9f */ SCMD_SVC_ACTION_OUT_G4, "service_action_out(16)", \ 491 /* 0xa0 */ SCMD_REPORT_LUNS, "report_luns", \ 492 /* 0xa2 */ SCMD_SECURITY_PROTO_IN, "security_protocol_in", \ 493 /* 0xa3 */ SCMD_MAINTENANCE_IN, "maintenance_in", \ 494 /* 0xa4 */ SCMD_MAINTENANCE_OUT, "maintenance_out", \ 495 /* 0xa8 */ SCMD_READ_G5, "read(12)", \ 496 /* 0xa9 */ SCMD_SVC_ACTION_OUT_G5, "service_action_out(12)", \ 497 /* 0xaa */ SCMD_WRITE_G5, "write(12)", \ 498 /* 0xab */ SCMD_SVC_ACTION_IN_G5, "service_action_in(12)", \ 499 /* 0xac */ SCMD_GET_PERFORMANCE, "get_performance", \ 500 /* 0xAE */ SCMD_WRITE_VERIFY_G5, "write_verify(12)", \ 501 /* 0xAF */ SCMD_VERIFY_G5, "verify(12)", \ 502 /* 0xb5 */ SCMD_SECURITY_PROTO_OUT, "security_protocol_out" \ 503 /* see cdio.h for additional command-to-string translations */ 504 505 /* XXX not a command code, does not belong here */ 506 #define ATAPI_CAPABILITIES 0x2A 507 508 #ifdef __cplusplus 509 } 510 #endif 511 512 /* 513 * Below are inclusions of files describing various command structures 514 * of interest. 515 */ 516 #include <sys/scsi/generic/inquiry.h> 517 #include <sys/scsi/generic/sense.h> 518 519 /* 520 * Private Vendor Unique Commands - Each implementation provides this. 521 */ 522 #include <sys/scsi/impl/commands.h> 523 524 #endif /* _SYS_SCSI_GENERIC_COMMANDS_H */ 525