1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright 2008 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26 #ifndef _SYS_DEVCTL_H 27 #define _SYS_DEVCTL_H 28 29 /* 30 * Device control interfaces 31 */ 32 #include <sys/types.h> 33 #include <sys/nvpair.h> 34 35 #ifdef __cplusplus 36 extern "C" { 37 #endif 38 39 /* 40 * structure used to pass IOCTL data between the libdevice interfaces 41 * and nexus driver devctl IOCTL interface. 42 * 43 * Applications and nexus drivers may not access the contents of this 44 * structure directly. Instead, drivers must use the ndi_dc_XXX(9n) 45 * interfaces, while applications must use the interfaces provided by 46 * libdevice.so.1. 47 */ 48 struct devctl_iocdata { 49 uint_t cmd; /* ioctl cmd */ 50 uint_t flags; /* command-specific flags */ 51 void *cpyout_buf; /* copyout vector */ 52 nvlist_t *nvl_user; /* application defined attributes */ 53 size_t nvl_usersz; 54 char *c_nodename; /* child device nodename */ 55 char *c_unitaddr; /* child device unit address */ 56 }; 57 58 #if defined(_SYSCALL32) 59 /* 60 * Structure to pass/return data from 32-bit program's. 61 */ 62 struct devctl_iocdata32 { 63 uint32_t cmd; 64 uint32_t flags; 65 caddr32_t cpyout_buf; 66 caddr32_t nvl_user; 67 uint32_t nvl_usersz; 68 caddr32_t c_nodename; 69 caddr32_t c_unitaddr; 70 }; 71 #endif 72 73 /* 74 * Limit size of packed application defined attributes (nvl_user) to prevent 75 * user application from requesting excessive kernel memory allocation. 76 */ 77 #define DEVCTL_MAX_NVL_USERSZ 0x10000 78 79 /* 80 * State of receptacle for an Attachment Point. 81 */ 82 typedef enum { 83 AP_RSTATE_EMPTY, 84 AP_RSTATE_DISCONNECTED, 85 AP_RSTATE_CONNECTED 86 } ap_rstate_t; 87 88 /* 89 * State of occupant for an Attachment Point. 90 */ 91 typedef enum { 92 AP_OSTATE_UNCONFIGURED, 93 AP_OSTATE_CONFIGURED 94 } ap_ostate_t; 95 96 /* 97 * condition of an Attachment Point. 98 */ 99 typedef enum { 100 AP_COND_UNKNOWN, 101 AP_COND_OK, 102 AP_COND_FAILING, 103 AP_COND_FAILED, 104 AP_COND_UNUSABLE 105 } ap_condition_t; 106 107 /* 108 * structure used to return the state of Attachment Point (AP) thru 109 * devctl_ap_getstate() interface. 110 */ 111 112 typedef struct devctl_ap_state { 113 ap_rstate_t ap_rstate; /* receptacle state */ 114 ap_ostate_t ap_ostate; /* occupant state */ 115 ap_condition_t ap_condition; /* condition of AP */ 116 time_t ap_last_change; 117 uint32_t ap_error_code; /* error code */ 118 uint8_t ap_in_transition; 119 } devctl_ap_state_t; 120 121 #if defined(_SYSCALL32) 122 /* 123 * Structure to pass/return data from 32-bit program's. 124 */ 125 typedef struct devctl_ap_state32 { 126 ap_rstate_t ap_rstate; /* receptacle state */ 127 ap_ostate_t ap_ostate; /* occupant state */ 128 ap_condition_t ap_condition; /* condition of AP */ 129 time32_t ap_last_change; 130 uint32_t ap_error_code; /* error code */ 131 uint8_t ap_in_transition; 132 } devctl_ap_state32_t; 133 #endif 134 135 #define DEVCTL_IOC (0xDC << 16) 136 #define DEVCTL_IOC_MAX (DEVCTL_IOC | 0xFFFF) 137 #define DEVCTL_BUS_QUIESCE (DEVCTL_IOC | 1) 138 #define DEVCTL_BUS_UNQUIESCE (DEVCTL_IOC | 2) 139 #define DEVCTL_BUS_RESETALL (DEVCTL_IOC | 3) 140 #define DEVCTL_BUS_RESET (DEVCTL_IOC | 4) 141 #define DEVCTL_BUS_GETSTATE (DEVCTL_IOC | 5) 142 #define DEVCTL_DEVICE_ONLINE (DEVCTL_IOC | 6) 143 #define DEVCTL_DEVICE_OFFLINE (DEVCTL_IOC | 7) 144 #define DEVCTL_DEVICE_GETSTATE (DEVCTL_IOC | 9) 145 #define DEVCTL_DEVICE_RESET (DEVCTL_IOC | 10) 146 #define DEVCTL_BUS_CONFIGURE (DEVCTL_IOC | 11) 147 #define DEVCTL_BUS_UNCONFIGURE (DEVCTL_IOC | 12) 148 #define DEVCTL_DEVICE_REMOVE (DEVCTL_IOC | 13) 149 #define DEVCTL_AP_CONNECT (DEVCTL_IOC | 14) 150 #define DEVCTL_AP_DISCONNECT (DEVCTL_IOC | 15) 151 #define DEVCTL_AP_INSERT (DEVCTL_IOC | 16) 152 #define DEVCTL_AP_REMOVE (DEVCTL_IOC | 17) 153 #define DEVCTL_AP_CONFIGURE (DEVCTL_IOC | 18) 154 #define DEVCTL_AP_UNCONFIGURE (DEVCTL_IOC | 19) 155 #define DEVCTL_AP_GETSTATE (DEVCTL_IOC | 20) 156 #define DEVCTL_AP_CONTROL (DEVCTL_IOC | 21) 157 #define DEVCTL_BUS_DEV_CREATE (DEVCTL_IOC | 22) 158 #define DEVCTL_PM_BUSY_COMP (DEVCTL_IOC | 23) 159 #define DEVCTL_PM_IDLE_COMP (DEVCTL_IOC | 24) 160 #define DEVCTL_PM_RAISE_PWR (DEVCTL_IOC | 25) 161 #define DEVCTL_PM_LOWER_PWR (DEVCTL_IOC | 26) 162 #define DEVCTL_PM_CHANGE_PWR_LOW (DEVCTL_IOC | 27) 163 #define DEVCTL_PM_CHANGE_PWR_HIGH (DEVCTL_IOC | 28) 164 #define DEVCTL_PM_POWER (DEVCTL_IOC | 29) 165 #define DEVCTL_PM_PROM_PRINTF (DEVCTL_IOC | 30) 166 #define DEVCTL_PM_FAIL_SUSPEND (DEVCTL_IOC | 31) 167 #define DEVCTL_PM_PWR_HAS_CHANGED_ON_RESUME (DEVCTL_IOC | 32) 168 #define DEVCTL_PM_PUP_WITH_PWR_HAS_CHANGED (DEVCTL_IOC | 34) 169 #define DEVCTL_PM_BUSY_COMP_TEST (DEVCTL_IOC | 35) 170 #define DEVCTL_PM_BUS_STRICT_TEST (DEVCTL_IOC | 36) 171 #define DEVCTL_PM_NO_LOWER_POWER (DEVCTL_IOC | 37) 172 #define DEVCTL_PM_BUS_NO_INVOL (DEVCTL_IOC | 38) 173 #define DEVCTL_SET_LED (DEVCTL_IOC | 39) 174 #define DEVCTL_GET_LED (DEVCTL_IOC | 40) 175 #define DEVCTL_NUM_LEDS (DEVCTL_IOC | 41) 176 177 178 /* 179 * is (c) in the range of possible devctl IOCTL commands? 180 */ 181 #define IS_DEVCTL(c) (((c) >= DEVCTL_IOC) && ((c) <= DEVCTL_IOC_MAX)) 182 183 /* 184 * Device and Bus State definitions 185 * 186 * Device state is returned as a set of bit-flags that indicate the current 187 * operational state of a device node. 188 * 189 * Device nodes for leaf devices only contain state information for the 190 * device itself. Nexus device nodes contain both Bus and Device state 191 * information. 192 * 193 * DEVICE_ONLINE - Device is available for use by the system. Mutually 194 * exclusive with DEVICE_OFFLINE. 195 * 196 * DEVICE_OFFLINE - Device is unavailable for use by the system. 197 * Mutually exclusive with DEVICE_ONLINE and DEVICE_BUSY. 198 * 199 * DEVICE_DOWN - Device has been placed in the "DOWN" state by 200 * its controlling driver. 201 * 202 * DEVICE_BUSY - Device has open instances or nexus has INITALIZED 203 * children (nexi). A device in this state is by 204 * definition Online. 205 * 206 * Bus state is returned as a set of bit-flags which indicates the 207 * operational state of a bus associated with the nexus dev_info node. 208 * 209 * BUS_ACTIVE - The bus associated with the device node is Active. 210 * I/O requests from child devices attached to the 211 * are initiated (or queued for initiation) as they 212 * are received. 213 * 214 * BUS_QUIESCED - The bus associated with the device node has been 215 * Quieced. I/O requests from child devices attached 216 * to the bus are held pending until the bus nexus is 217 * Unquiesced. 218 * 219 * BUS_SHUTDOWN - The bus associated with the device node has been 220 * shutdown by the nexus driver. I/O requests from 221 * child devices are returned with an error indicating 222 * the requested operation failed. 223 */ 224 #define DEVICE_ONLINE 0x1 225 #define DEVICE_BUSY 0x2 226 #define DEVICE_OFFLINE 0x4 227 #define DEVICE_DOWN 0x8 228 229 #define BUS_ACTIVE 0x10 230 #define BUS_QUIESCED 0x20 231 #define BUS_SHUTDOWN 0x40 232 233 #define DC_DEVI_NODENAME "ndi_dc.devi_nodename" 234 235 #define DEVCTL_CONSTRUCT 0x1 236 #define DEVCTL_OFFLINE 0x2 237 238 /* 239 * Drive status LED control 240 */ 241 struct dc_led_ctl { 242 uint32_t led_number : 16; /* LED/device number */ 243 uint32_t led_ctl_active : 1; /* Control active */ 244 uint32_t led_type : 9; /* LED type */ 245 uint32_t led_state : 6; /* LED ON/OFF/Blink state */ 246 }; 247 248 /* Control active field */ 249 #define DCL_CNTRL_OFF 0 /* Control inactive */ 250 #define DCL_CNTRL_ON 1 /* Control active */ 251 252 /* LED type field */ 253 #define DCL_TYPE_DEVICE_FAIL 1 /* Device FAIL LED type */ 254 #define DCL_TYPE_DEVICE_OK2RM 2 /* Device OK2RM LED type */ 255 256 /* LED state field */ 257 #define DCL_STATE_OFF 0 /* LED state OFF */ 258 #define DCL_STATE_ON 1 /* LED state ON */ 259 #define DCL_STATE_SLOW_BLNK 2 /* LED slow blink */ 260 #define DCL_STATE_FAST_BLNK 3 /* LED fast blink */ 261 262 #ifdef __cplusplus 263 } 264 #endif 265 266 #endif /* _SYS_DEVCTL_H */ 267