1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (C) 4Front Technologies 1996-2008. 23 * 24 * Copyright 2010 Sun Microsystems, Inc. All rights reserved. 25 * Use is subject to license terms. 26 */ 27 28 #ifndef _SYS_AUDIO_AUDIO_DRIVER_H 29 #define _SYS_AUDIO_AUDIO_DRIVER_H 30 31 #include <sys/types.h> 32 #include <sys/list.h> 33 #include <sys/ddi.h> 34 #include <sys/sunddi.h> 35 #include <sys/audio/audio_common.h> 36 37 38 #ifdef __cplusplus 39 extern "C" { 40 #endif 41 42 #ifdef _KERNEL 43 44 struct audio_engine_ops { 45 int audio_engine_version; 46 #define AUDIO_ENGINE_VERSION 1 47 48 /* 49 * Initialize engine, including buffer allocation. Arguments 50 * that are pointers are hints. On return, they are updated with 51 * the actual values configured by the driver. 52 */ 53 int (*audio_engine_open)(void *, int flags, 54 unsigned *fragfr, unsigned *nfrags, caddr_t *buf); 55 void (*audio_engine_close)(void *); 56 57 /* 58 * Start and stop are used to actually get the hardware running 59 * or stop the hardware. Until this is kicked off, the engine 60 * will not actually transfer data. These are not destructive to 61 * ring positions, etc. (Think of it like pause/play). 62 */ 63 int (*audio_engine_start)(void *); 64 void (*audio_engine_stop)(void *); 65 66 /* 67 * Obtain the engine offset. Offsets start at zero at engine_open, 68 * and keep counting upwards. Count is returned in frames. 69 */ 70 uint64_t (*audio_engine_count)(void *); 71 72 /* 73 * The following entry points return the currently configured 74 * status of the engine. It is assumed that the engine's 75 * configuration is relatively fixed, and does not change 76 * while open, or in response to open. 77 * 78 * However, in the future we might like to allow for the 79 * device to change the settings while it is not open, which 80 * could allow for mixerctl to change the configured channels, 81 * for example. In order to synchronize this properly, we'll 82 * need the engine to perform a notification/request. That 83 * will be added later. 84 * 85 * AC3: We will have to figure out how to support dynamically 86 * selecting different sampling frequencies for AC3, since 87 * it needs to be able to support 32, 44.1, and 48 kHz. 88 * Perhaps special flags used during open() would do the trick. 89 */ 90 int (*audio_engine_format)(void *); 91 int (*audio_engine_channels)(void *); 92 int (*audio_engine_rate)(void *); 93 94 /* 95 * DMA cache synchronization. The framework does this on 96 * behalf of the driver for both input and output. The driver 97 * is responsible for tracking the direction (based on the 98 * flags passed to ae_open()), and dealing with any partial 99 * synchronization if any is needed. 100 */ 101 void (*audio_engine_sync)(void *, unsigned); 102 103 /* 104 * The framework may like to know how deep the device queues data. 105 * This can be used to provide a more accurate latency calculation. 106 */ 107 unsigned (*audio_engine_qlen)(void *); 108 109 /* 110 * If the driver doesn't use simple interleaving, then we need to 111 * know more about the offsets of channels within the buffer. 112 * We obtain both the starting offset within the buffer, and the 113 * increment for each new sample. As usual, these are given in 114 * samples. If this entry point is NULL, the framework assumes 115 * that simple interlevaing is used instead. 116 */ 117 void (*audio_engine_chinfo)(void *, int chan, unsigned *offset, 118 unsigned *incr); 119 120 /* 121 * The following entry point is used to determine the play ahead 122 * desired by the engine. Engines with less consistent scheduling, 123 * or with a need for deeper queuing, implement this. If not 124 * implemented, the framework assumes 1.5 * fragfr. 125 */ 126 unsigned (*audio_engine_playahead)(void *); 127 }; 128 129 void audio_init_ops(struct dev_ops *, const char *); 130 void audio_fini_ops(struct dev_ops *); 131 132 audio_dev_t *audio_dev_alloc(dev_info_t *, int); 133 void audio_dev_free(audio_dev_t *); 134 135 void audio_dev_set_description(audio_dev_t *, const char *); 136 void audio_dev_set_version(audio_dev_t *, const char *); 137 void audio_dev_add_info(audio_dev_t *, const char *); 138 139 audio_engine_t *audio_engine_alloc(audio_engine_ops_t *, unsigned); 140 void audio_engine_set_private(audio_engine_t *, void *); 141 void *audio_engine_get_private(audio_engine_t *); 142 void audio_engine_free(audio_engine_t *); 143 144 void audio_dev_add_engine(audio_dev_t *, audio_engine_t *); 145 void audio_dev_remove_engine(audio_dev_t *, audio_engine_t *); 146 int audio_dev_register(audio_dev_t *); 147 int audio_dev_unregister(audio_dev_t *); 148 void audio_dev_warn(audio_dev_t *, const char *, ...); 149 /* DEBUG ONLY */ 150 void audio_dump_bytes(const uint8_t *w, int dcount); 151 void audio_dump_words(const uint16_t *w, int dcount); 152 void audio_dump_dwords(const uint32_t *w, int dcount); 153 154 /* 155 * Drivers call these. 156 */ 157 void audio_engine_consume(audio_engine_t *); 158 void audio_engine_produce(audio_engine_t *); 159 void audio_engine_reset(audio_engine_t *); 160 void audio_engine_lock(audio_engine_t *); 161 void audio_engine_unlock(audio_engine_t *); 162 163 /* Engine flags */ 164 #define ENGINE_OUTPUT_CAP (1U << 2) 165 #define ENGINE_INPUT_CAP (1U << 3) 166 #define ENGINE_CAPS (ENGINE_OUTPUT_CAP | ENGINE_INPUT_CAP) 167 #define ENGINE_DRIVER_FLAGS (0xffff) /* flags usable by driver */ 168 169 #define ENGINE_OUTPUT (1U << 16) /* fields not for driver use */ 170 #define ENGINE_INPUT (1U << 17) 171 #define ENGINE_OPEN (1U << 18) 172 #define ENGINE_RUNNING (1U << 19) 173 #define ENGINE_EXCLUSIVE (1U << 20) /* exclusive use, e.g. AC3 */ 174 #define ENGINE_NDELAY (1U << 21) /* non-blocking open */ 175 #define ENGINE_WAKE (1U << 22) /* wakeup tq running */ 176 177 /* 178 * entry points used by legacy SADA drivers 179 */ 180 int audio_legacy_open(queue_t *, dev_t *, int, int, cred_t *); 181 int audio_legacy_close(queue_t *, int, cred_t *); 182 int audio_legacy_wput(queue_t *, mblk_t *); 183 int audio_legacy_wsrv(queue_t *); 184 185 186 187 /* 188 * Audio device controls 189 */ 190 191 /* 192 * Control read or write driver function type. 193 * 194 * Returns zero on success, errno on failure. 195 */ 196 typedef int (*audio_ctrl_wr_t)(void *, uint64_t); 197 typedef int (*audio_ctrl_rd_t)(void *, uint64_t *); 198 199 200 /* 201 * This will allocate and register a control for my audio device. 202 * 203 * On success this will return a control structure else NULL. 204 */ 205 audio_ctrl_t *audio_dev_add_control(audio_dev_t *, 206 audio_ctrl_desc_t *, audio_ctrl_rd_t, audio_ctrl_wr_t, void *); 207 208 /* 209 * Add a synthetic PCM volume control. This should only be used by 210 * devices which have no physical PCM volume controls. The control 211 * implements a simple attenuator on the PCM data; unlike AC'97 there 212 * is no "gain", so using this instead of a hardware control may 213 * result in loss range. The control is implemented using 214 * AUDIO_CTRL_ID_VOLUME. 215 */ 216 int audio_dev_add_soft_volume(audio_dev_t *); 217 218 /* 219 * This will remove a control from an audio device. 220 */ 221 void audio_dev_del_control(audio_ctrl_t *); 222 223 /* 224 * This will tell the framework that controls have changed 225 * and it should update its values. 226 */ 227 void audio_dev_update_controls(audio_dev_t *); 228 229 /* 230 * This is used to read the current value of a control. 231 * Note, this will cause a callback into the driver to get the value. 232 * 233 * On return zero is returned on success else errno is returned. 234 */ 235 int audio_control_read(audio_ctrl_t *, uint64_t *); 236 237 /* 238 * This is used to write a value to a control. 239 * Note, this will cause a callback into the driver to write the value. 240 * 241 * On return zero is returned on success else errno is returned. 242 */ 243 int audio_control_write(audio_ctrl_t *, uint64_t); 244 245 #endif /* _KERNEL */ 246 247 #ifdef __cplusplus 248 } 249 #endif 250 251 #endif /* _SYS_AUDIO_AUDIO_DRIVER_H */ 252