1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* ONC_PLUS EXTRACT START */ 22 /* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 /* ONC_PLUS EXTRACT END */ 27 28 /* 29 * Configure root, swap and dump devices. 30 */ 31 32 #include <sys/types.h> 33 #include <sys/param.h> 34 #include <sys/sysmacros.h> 35 #include <sys/signal.h> 36 #include <sys/cred.h> 37 #include <sys/proc.h> 38 #include <sys/user.h> 39 #include <sys/conf.h> 40 #include <sys/buf.h> 41 #include <sys/systm.h> 42 #include <sys/vm.h> 43 #include <sys/reboot.h> 44 #include <sys/file.h> 45 #include <sys/vfs.h> 46 #include <sys/vnode.h> 47 #include <sys/errno.h> 48 #include <sys/kmem.h> 49 #include <sys/uio.h> 50 #include <sys/open.h> 51 #include <sys/mount.h> 52 #include <sys/kobj.h> 53 #include <sys/bootconf.h> 54 #include <sys/sysconf.h> 55 #include <sys/modctl.h> 56 #include <sys/autoconf.h> 57 #include <sys/debug.h> 58 #include <sys/fs/snode.h> 59 #include <fs/fs_subr.h> 60 #include <sys/socket.h> 61 #include <net/if.h> 62 63 #include <sys/mkdev.h> 64 #include <sys/cmn_err.h> 65 #include <sys/console.h> 66 67 #include <sys/conf.h> 68 #include <sys/ddi.h> 69 #include <sys/sunddi.h> 70 #include <sys/hwconf.h> 71 #include <sys/dc_ki.h> 72 #include <sys/promif.h> 73 #include <sys/bootprops.h> 74 75 /* 76 * Local routines 77 */ 78 static int preload_module(struct sysparam *, void *); 79 static struct vfssw *getfstype(char *, char *, size_t); 80 static int getphysdev(char *, char *, size_t); 81 static int load_bootpath_drivers(char *bootpath); 82 static int load_boot_driver(char *drv); 83 static int load_boot_platform_modules(char *drv); 84 static dev_info_t *path_to_devinfo(char *path); 85 static boolean_t netboot_over_ib(char *bootpath); 86 static boolean_t netboot_over_iscsi(void); 87 88 /* 89 * Module linkage information for the kernel. 90 */ 91 static struct modlmisc modlmisc = { 92 &mod_miscops, "root and swap configuration" 93 }; 94 95 static struct modlinkage modlinkage = { 96 MODREV_1, (void *)&modlmisc, NULL 97 }; 98 99 int 100 _init(void) 101 { 102 return (mod_install(&modlinkage)); 103 } 104 105 int 106 _fini(void) 107 { 108 return (mod_remove(&modlinkage)); 109 } 110 111 int 112 _info(struct modinfo *modinfop) 113 { 114 return (mod_info(&modlinkage, modinfop)); 115 } 116 117 extern ib_boot_prop_t *iscsiboot_prop; 118 /* 119 * Configure root file system. 120 */ 121 int 122 rootconf(void) 123 { 124 int error; 125 struct vfssw *vsw; 126 extern void pm_init(void); 127 int ret = -1; 128 BMDPRINTF(("rootconf: fstype %s\n", rootfs.bo_fstype)); 129 BMDPRINTF(("rootconf: name %s\n", rootfs.bo_name)); 130 BMDPRINTF(("rootconf: flags 0x%x\n", rootfs.bo_flags)); 131 BMDPRINTF(("rootconf: obp_bootpath %s\n", obp_bootpath)); 132 133 /* 134 * Install cluster modules that were only loaded during 135 * loadrootmodules(). 136 */ 137 if (error = clboot_rootconf()) 138 return (error); 139 140 if (root_is_svm) { 141 (void) strncpy(rootfs.bo_name, obp_bootpath, BO_MAXOBJNAME); 142 143 BMDPRINTF(("rootconf: svm: rootfs name %s\n", rootfs.bo_name)); 144 BMDPRINTF(("rootconf: svm: svm name %s\n", svm_bootpath)); 145 } 146 147 /* 148 * Run _init on the root filesystem (we already loaded it 149 * but we've been waiting until now to _init it) which will 150 * have the side-effect of running vsw_init() on this vfs. 151 * Because all the nfs filesystems are lumped into one 152 * module we need to special case it. 153 */ 154 if (strncmp(rootfs.bo_fstype, "nfs", 3) == 0) { 155 if (modload("fs", "nfs") == -1) { 156 cmn_err(CE_CONT, "Cannot initialize %s filesystem\n", 157 rootfs.bo_fstype); 158 return (ENXIO); 159 } 160 } else { 161 if (modload("fs", rootfs.bo_fstype) == -1) { 162 cmn_err(CE_CONT, "Cannot initialize %s filesystem\n", 163 rootfs.bo_fstype); 164 return (ENXIO); 165 } 166 } 167 RLOCK_VFSSW(); 168 vsw = vfs_getvfsswbyname(rootfs.bo_fstype); 169 RUNLOCK_VFSSW(); 170 if (vsw == NULL) { 171 cmn_err(CE_CONT, "Cannot find %s filesystem\n", 172 rootfs.bo_fstype); 173 return (ENXIO); 174 } 175 VFS_INIT(rootvfs, &vsw->vsw_vfsops, (caddr_t)0); 176 VFS_HOLD(rootvfs); 177 178 if (root_is_svm) { 179 rootvfs->vfs_flag |= VFS_RDONLY; 180 } 181 182 /* 183 * This pm-releated call has to occur before root is mounted since we 184 * need to power up all devices. It is placed after VFS_INIT() such 185 * that opening a device via ddi_lyr_ interface just before root has 186 * been mounted would work. 187 */ 188 pm_init(); 189 190 if (netboot && iscsiboot_prop) { 191 cmn_err(CE_WARN, "NFS boot and iSCSI boot" 192 " shouldn't happen in the same time"); 193 return (EINVAL); 194 } 195 196 if (netboot || iscsiboot_prop) { 197 ret = strplumb(); 198 if (ret != 0) { 199 cmn_err(CE_WARN, "Cannot plumb network device %d", ret); 200 return (EFAULT); 201 } 202 } 203 204 if ((ret == 0) && iscsiboot_prop) { 205 ret = modload("drv", "iscsi"); 206 /* -1 indicates fail */ 207 if (ret == -1) { 208 cmn_err(CE_WARN, "Failed to load iscsi module"); 209 iscsi_boot_prop_free(); 210 return (EINVAL); 211 } else { 212 if (!i_ddi_attach_pseudo_node("iscsi")) { 213 cmn_err(CE_WARN, 214 "Failed to attach iscsi driver"); 215 iscsi_boot_prop_free(); 216 return (ENODEV); 217 } 218 } 219 } 220 221 /* 222 * ufs_mountroot() ends up calling getrootdev() 223 * (below) which actually triggers the _init, identify, 224 * probe and attach of the drivers that make up root device 225 * bush; these are also quietly waiting in memory. 226 */ 227 BMDPRINTF(("rootconf: calling VFS_MOUNTROOT %s\n", rootfs.bo_fstype)); 228 229 error = VFS_MOUNTROOT(rootvfs, ROOT_INIT); 230 vfs_unrefvfssw(vsw); 231 rootdev = rootvfs->vfs_dev; 232 233 if (error) 234 cmn_err(CE_CONT, "Cannot mount root on %s fstype %s\n", 235 rootfs.bo_name, rootfs.bo_fstype); 236 else 237 cmn_err(CE_CONT, "?root on %s fstype %s\n", 238 rootfs.bo_name, rootfs.bo_fstype); 239 return (error); 240 } 241 242 /* 243 * Remount root on an SVM mirror root device 244 * Only supported on UFS filesystems at present 245 */ 246 int 247 svm_rootconf(void) 248 { 249 int error; 250 extern int ufs_remountroot(struct vfs *vfsp); 251 252 ASSERT(root_is_svm == 1); 253 254 if (strcmp(rootfs.bo_fstype, "ufs") != 0) { 255 cmn_err(CE_CONT, "Mounting root on %s with filesystem " 256 "type %s is not supported\n", 257 rootfs.bo_name, rootfs.bo_fstype); 258 return (EINVAL); 259 } 260 261 (void) strncpy(rootfs.bo_name, svm_bootpath, BO_MAXOBJNAME); 262 263 BMDPRINTF(("svm_rootconf: rootfs %s\n", rootfs.bo_name)); 264 265 error = ufs_remountroot(rootvfs); 266 267 if (error) { 268 cmn_err(CE_CONT, "Cannot remount root on %s fstype %s\n", 269 rootfs.bo_name, rootfs.bo_fstype); 270 } else { 271 cmn_err(CE_CONT, "?root remounted on %s fstype %s\n", 272 rootfs.bo_name, rootfs.bo_fstype); 273 } 274 return (error); 275 } 276 277 /* 278 * Under the assumption that our root file system is on a 279 * disk partition, get the dev_t of the partition in question. 280 * 281 * By now, boot has faithfully loaded all our modules into memory, and 282 * we've taken over resource management. Before we go any further, we 283 * have to fire up the device drivers and stuff we need to mount the 284 * root filesystem. That's what we do here. Fingers crossed. 285 */ 286 dev_t 287 getrootdev(void) 288 { 289 dev_t d; 290 291 d = ddi_pathname_to_dev_t(rootfs.bo_name); 292 if ((d == NODEV) && (iscsiboot_prop != NULL)) { 293 /* Give it another try with the 'disk' path */ 294 get_iscsi_bootpath_phy(rootfs.bo_name); 295 d = ddi_pathname_to_dev_t(rootfs.bo_name); 296 } 297 if (d == NODEV) 298 cmn_err(CE_CONT, "Cannot assemble drivers for root %s\n", 299 rootfs.bo_name); 300 return (d); 301 } 302 303 /* 304 * If booted with ASKNAME, prompt on the console for a filesystem 305 * name and return it. 306 */ 307 void 308 getfsname(char *askfor, char *name, size_t namelen) 309 { 310 if (boothowto & RB_ASKNAME) { 311 printf("%s name: ", askfor); 312 console_gets(name, namelen); 313 } 314 } 315 316 /*ARGSUSED1*/ 317 static int 318 preload_module(struct sysparam *sysp, void *p) 319 { 320 static char *wmesg = "forceload of %s failed"; 321 char *name; 322 323 name = sysp->sys_ptr; 324 BMDPRINTF(("preload_module: %s\n", name)); 325 if (modloadonly(NULL, name) < 0) 326 cmn_err(CE_WARN, wmesg, name); 327 return (0); 328 } 329 330 /* ONC_PLUS EXTRACT START */ 331 /* 332 * We want to load all the modules needed to mount the root filesystem, 333 * so that when we start the ball rolling in 'getrootdev', every module 334 * should already be in memory, just waiting to be init-ed. 335 */ 336 337 int 338 loadrootmodules(void) 339 { 340 struct vfssw *vsw; 341 char *this; 342 char *name; 343 int err; 344 /* ONC_PLUS EXTRACT END */ 345 int i, proplen; 346 extern char *impl_module_list[]; 347 extern char *platform_module_list[]; 348 349 /* Make sure that the PROM's devinfo tree has been created */ 350 ASSERT(ddi_root_node()); 351 352 BMDPRINTF(("loadrootmodules: fstype %s\n", rootfs.bo_fstype)); 353 BMDPRINTF(("loadrootmodules: name %s\n", rootfs.bo_name)); 354 BMDPRINTF(("loadrootmodules: flags 0x%x\n", rootfs.bo_flags)); 355 356 /* 357 * zzz We need to honor what's in rootfs if it's not null. 358 * non-null means use what's there. This way we can 359 * change rootfs with /etc/system AND with tunetool. 360 */ 361 if (root_is_svm) { 362 /* user replaced rootdev, record obp_bootpath */ 363 obp_bootpath[0] = '\0'; 364 (void) getphysdev("root", obp_bootpath, BO_MAXOBJNAME); 365 BMDPRINTF(("loadrootmodules: obp_bootpath %s\n", obp_bootpath)); 366 } else { 367 /* 368 * Get the root fstype and root device path from boot. 369 */ 370 rootfs.bo_fstype[0] = '\0'; 371 rootfs.bo_name[0] = '\0'; 372 } 373 374 /* 375 * This lookup will result in modloadonly-ing the root 376 * filesystem module - it gets _init-ed in rootconf() 377 */ 378 if ((vsw = getfstype("root", rootfs.bo_fstype, BO_MAXFSNAME)) == NULL) 379 return (ENXIO); /* in case we have no file system types */ 380 381 (void) strcpy(rootfs.bo_fstype, vsw->vsw_name); 382 383 vfs_unrefvfssw(vsw); 384 385 /* 386 * Load the favored drivers of the implementation. 387 * e.g. 'sbus' and possibly 'zs' (even). 388 * 389 * Called whilst boot is still loaded (because boot does 390 * the i/o for us), and DDI services are unavailable. 391 */ 392 BMDPRINTF(("loadrootmodules: impl_module_list\n")); 393 for (i = 0; (this = impl_module_list[i]) != NULL; i++) { 394 if ((err = load_boot_driver(this)) != 0) { 395 cmn_err(CE_WARN, "Cannot load drv/%s", this); 396 return (err); 397 } 398 } 399 /* 400 * Now load the platform modules (if any) 401 */ 402 BMDPRINTF(("loadrootmodules: platform_module_list\n")); 403 for (i = 0; (this = platform_module_list[i]) != NULL; i++) { 404 if ((err = load_boot_platform_modules(this)) != 0) { 405 cmn_err(CE_WARN, "Cannot load drv/%s", this); 406 return (err); 407 } 408 } 409 410 loop: 411 (void) getphysdev("root", rootfs.bo_name, BO_MAXOBJNAME); 412 /* 413 * Given a physical pathname, load the correct set of driver 414 * modules into memory, including all possible parents. 415 * 416 * NB: The code sets the variable 'name' for error reporting. 417 */ 418 err = 0; 419 BMDPRINTF(("loadrootmodules: rootfs %s\n", rootfs.bo_name)); 420 if (root_is_svm == 0) { 421 BMDPRINTF(("loadrootmodules: rootfs %s\n", rootfs.bo_name)); 422 name = rootfs.bo_name; 423 err = load_bootpath_drivers(rootfs.bo_name); 424 } 425 426 /* 427 * Load driver modules in obp_bootpath, this is always 428 * required for mountroot to succeed. obp_bootpath is 429 * is set if rootdev is set via /etc/system, which is 430 * the case if booting of a SVM/VxVM mirror. 431 */ 432 if ((err == 0) && obp_bootpath[0] != '\0') { 433 BMDPRINTF(("loadrootmodules: obp_bootpath %s\n", obp_bootpath)); 434 name = obp_bootpath; 435 err = load_bootpath_drivers(obp_bootpath); 436 } 437 438 if (err != 0) { 439 cmn_err(CE_CONT, "Cannot load drivers for %s\n", name); 440 goto out; 441 } 442 443 /* 444 * Check to see if the booter performed DHCP configuration 445 * ("bootp-response" boot property exists). If so, then before 446 * bootops disappears we need to save the value of this property 447 * such that the userland dhcpagent can adopt the DHCP management 448 * of our primary network interface. 449 */ 450 proplen = BOP_GETPROPLEN(bootops, "bootp-response"); 451 if (proplen > 0) { 452 dhcack = kmem_zalloc(proplen, KM_SLEEP); 453 if (BOP_GETPROP(bootops, "bootp-response", dhcack) == -1) { 454 cmn_err(CE_WARN, "BOP_GETPROP of " 455 "\"bootp-response\" failed\n"); 456 kmem_free(dhcack, dhcacklen); 457 dhcack = NULL; 458 goto out; 459 } 460 dhcacklen = proplen; 461 462 /* 463 * Fetch the "netdev-path" boot property (if it exists), and 464 * stash it for later use by sysinfo(SI_DHCP_CACHE, ...). 465 */ 466 proplen = BOP_GETPROPLEN(bootops, "netdev-path"); 467 if (proplen > 0) { 468 netdev_path = kmem_zalloc(proplen, KM_SLEEP); 469 if (BOP_GETPROP(bootops, "netdev-path", 470 (uchar_t *)netdev_path) == -1) { 471 cmn_err(CE_WARN, "BOP_GETPROP of " 472 "\"netdev-path\" failed\n"); 473 kmem_free(netdev_path, proplen); 474 goto out; 475 } 476 } 477 } 478 479 /* 480 * Preload (load-only, no init) all modules which 481 * were added to the /etc/system file with the 482 * FORCELOAD keyword. 483 */ 484 BMDPRINTF(("loadrootmodules: preload_module\n")); 485 (void) mod_sysctl_type(MOD_FORCELOAD, preload_module, NULL); 486 487 /* ONC_PLUS EXTRACT START */ 488 /* 489 * If we booted otw then load in the plumbing 490 * routine now while we still can. If we didn't 491 * boot otw then we will load strplumb in main(). 492 * 493 * NFS is actually a set of modules, the core routines, 494 * a diskless helper module, rpcmod, and the tli interface. Load 495 * them now while we still can. 496 * 497 * Because we glomb all versions of nfs into a single module 498 * we check based on the initial string "nfs". 499 * 500 * XXX: A better test for this is to see if device_type 501 * XXX: from the PROM is "network". 502 */ 503 504 if (strncmp(rootfs.bo_fstype, "nfs", 3) == 0) { 505 ++netboot; 506 507 /* 508 * Preload (load-only, no init) the dacf module. We cannot 509 * init the module because one of its requisite modules is 510 * dld whose _init function will call taskq_create(), which 511 * will panic the system at this point. 512 */ 513 if ((err = modloadonly("dacf", "net_dacf")) < 0) { 514 cmn_err(CE_CONT, "Cannot load dacf/net_dacf\n"); 515 goto out; 516 } 517 if ((err = modload("misc", "tlimod")) < 0) { 518 cmn_err(CE_CONT, "Cannot load misc/tlimod\n"); 519 goto out; 520 } 521 if ((err = modload("strmod", "rpcmod")) < 0) { 522 cmn_err(CE_CONT, "Cannot load strmod/rpcmod\n"); 523 goto out; 524 } 525 if ((err = modload("misc", "nfs_dlboot")) < 0) { 526 cmn_err(CE_CONT, "Cannot load misc/nfs_dlboot\n"); 527 goto out; 528 } 529 if ((err = modload("mac", "mac_ether")) < 0) { 530 cmn_err(CE_CONT, "Cannot load mac/mac_ether\n"); 531 goto out; 532 } 533 if ((err = modload("misc", "strplumb")) < 0) { 534 cmn_err(CE_CONT, "Cannot load misc/strplumb\n"); 535 goto out; 536 } 537 if ((err = strplumb_load()) < 0) { 538 goto out; 539 } 540 } 541 if (netboot_over_iscsi() == B_TRUE) { 542 /* iscsi boot */ 543 if ((err = modloadonly("dacf", "net_dacf")) < 0) { 544 cmn_err(CE_CONT, "Cannot load dacf/net_dacf\n"); 545 goto out; 546 } 547 if ((err = modload("misc", "tlimod")) < 0) { 548 cmn_err(CE_CONT, "Cannot load misc/tlimod\n"); 549 goto out; 550 } 551 if ((err = modload("mac", "mac_ether")) < 0) { 552 cmn_err(CE_CONT, "Cannot load mac/mac_ether\n"); 553 goto out; 554 } 555 if ((err = modloadonly("drv", "iscsi")) < 0) { 556 cmn_err(CE_CONT, "Cannot load drv/iscsi\n"); 557 goto out; 558 } 559 if ((err = modloadonly("drv", "ssd")) < 0) { 560 cmn_err(CE_CONT, "Cannot load drv/ssd\n"); 561 goto out; 562 } 563 if ((err = modloadonly("drv", "sd")) < 0) { 564 cmn_err(CE_CONT, "Cannot load drv/sd\n"); 565 goto out; 566 } 567 if ((err = modload("misc", "strplumb")) < 0) { 568 cmn_err(CE_CONT, "Cannot load misc/strplumb\n"); 569 goto out; 570 } 571 if ((err = strplumb_load()) < 0) { 572 goto out; 573 } 574 } 575 /* 576 * Preload modules needed for booting as a cluster. 577 */ 578 err = clboot_loadrootmodules(); 579 580 out: 581 if (err != 0 && (boothowto & RB_ASKNAME)) 582 goto loop; 583 584 return (err); 585 } 586 /* ONC_PLUS EXTRACT END */ 587 588 static int 589 get_bootpath_prop(char *bootpath) 590 { 591 if (root_is_ramdisk) { 592 if (BOP_GETPROP(bootops, "bootarchive", bootpath) == -1) 593 return (-1); 594 (void) strlcat(bootpath, ":a", BO_MAXOBJNAME); 595 } else { 596 /* 597 * Look for the 1275 compliant name 'bootpath' first, 598 * but make certain it has a non-NULL value as well. 599 */ 600 if ((BOP_GETPROP(bootops, "bootpath", bootpath) == -1) || 601 strlen(bootpath) == 0) { 602 if (BOP_GETPROP(bootops, 603 "boot-path", bootpath) == -1) 604 return (-1); 605 } 606 if (memcmp(bootpath, BP_ISCSI_DISK, 607 strlen(BP_ISCSI_DISK)) == 0) { 608 /* iscsi boot */ 609 get_iscsi_bootpath_vhci(bootpath); 610 } 611 } 612 return (0); 613 } 614 615 static int 616 get_fstype_prop(char *fstype) 617 { 618 char *prop = (root_is_ramdisk) ? "archive-fstype" : "fstype"; 619 620 return (BOP_GETPROP(bootops, prop, fstype)); 621 } 622 623 /* 624 * Get the name of the root or swap filesystem type, and return 625 * the corresponding entry in the vfs switch. 626 * 627 * If we're not asking the user, and we're trying to find the 628 * root filesystem type, we ask boot for the filesystem 629 * type that it came from and use that. Similarly, if we're 630 * trying to find the swap filesystem, we try and derive it from 631 * the root filesystem type. 632 * 633 * If we are booting via NFS we currently have these options: 634 * nfs - dynamically choose NFS V2. V3, or V4 (default) 635 * nfs2 - force NFS V2 636 * nfs3 - force NFS V3 637 * nfs4 - force NFS V4 638 * Because we need to maintain backward compatibility with the naming 639 * convention that the NFS V2 filesystem name is "nfs" (see vfs_conf.c) 640 * we need to map "nfs" => "nfsdyn" and "nfs2" => "nfs". The dynamic 641 * nfs module will map the type back to either "nfs", "nfs3", or "nfs4". 642 * This is only for root filesystems, all other uses such as cachefs 643 * will expect that "nfs" == NFS V2. 644 * 645 * If the filesystem isn't already loaded, vfs_getvfssw() will load 646 * it for us, but if (at the time we call it) modrootloaded is 647 * still not set, it won't run the filesystems _init routine (and 648 * implicitly it won't run the filesystems vsw_init() entry either). 649 * We do that explicitly in rootconf(). 650 */ 651 static struct vfssw * 652 getfstype(char *askfor, char *fsname, size_t fsnamelen) 653 { 654 struct vfssw *vsw; 655 static char defaultfs[BO_MAXFSNAME]; 656 int root = 0; 657 658 if (strcmp(askfor, "root") == 0) { 659 (void) get_fstype_prop(defaultfs); 660 root++; 661 } else { 662 (void) strcpy(defaultfs, "swapfs"); 663 } 664 665 if (boothowto & RB_ASKNAME) { 666 for (*fsname = '\0'; *fsname == '\0'; *fsname = '\0') { 667 printf("%s filesystem type [%s]: ", askfor, defaultfs); 668 console_gets(fsname, fsnamelen); 669 if (*fsname == '\0') 670 (void) strcpy(fsname, defaultfs); 671 if (root) { 672 if (strcmp(fsname, "nfs2") == 0) 673 (void) strcpy(fsname, "nfs"); 674 else if (strcmp(fsname, "nfs") == 0) 675 (void) strcpy(fsname, "nfsdyn"); 676 } 677 if ((vsw = vfs_getvfssw(fsname)) != NULL) 678 return (vsw); 679 printf("Unknown filesystem type '%s'\n", fsname); 680 } 681 } else if (*fsname == '\0') { 682 fsname = defaultfs; 683 } 684 if (*fsname == '\0') { 685 return (NULL); 686 } 687 688 if (root) { 689 if (strcmp(fsname, "nfs2") == 0) 690 (void) strcpy(fsname, "nfs"); 691 else if (strcmp(fsname, "nfs") == 0) 692 (void) strcpy(fsname, "nfsdyn"); 693 } 694 695 return (vfs_getvfssw(fsname)); 696 } 697 698 699 /* 700 * Get a physical device name, and maybe load and attach 701 * the driver. 702 * 703 * XXX Need better checking of whether or not a device 704 * actually exists if the user typed in a pathname. 705 * 706 * XXX Are we sure we want to expose users to this sort 707 * of physical namespace gobbledygook (now there's 708 * a word to conjure with..) 709 * 710 * XXX Note that on an OBP machine, we can easily ask the 711 * prom and pretty-print some plausible set of bootable 712 * devices. We can also user the prom to verify any 713 * such device. Later tim.. later. 714 */ 715 static int 716 getphysdev(char *askfor, char *name, size_t namelen) 717 { 718 static char fmt[] = "Enter physical name of %s device\n[%s]: "; 719 dev_t dev; 720 static char defaultpath[BO_MAXOBJNAME]; 721 722 /* 723 * Establish 'default' values - we get the root device from 724 * boot, and we infer the swap device is the same but with 725 * a 'b' on the end instead of an 'a'. A first stab at 726 * ease-of-use .. 727 */ 728 if (strcmp(askfor, "root") == 0) { 729 if (get_bootpath_prop(defaultpath) == -1) 730 boothowto |= RB_ASKNAME | RB_VERBOSE; 731 } else { 732 (void) strcpy(defaultpath, rootfs.bo_name); 733 defaultpath[strlen(defaultpath) - 1] = 'b'; 734 } 735 736 retry: 737 if (boothowto & RB_ASKNAME) { 738 printf(fmt, askfor, defaultpath); 739 console_gets(name, namelen); 740 } 741 if (*name == '\0') 742 (void) strcpy(name, defaultpath); 743 744 if (strcmp(askfor, "swap") == 0) { 745 746 /* 747 * Try to load and install the swap device driver. 748 */ 749 dev = ddi_pathname_to_dev_t(name); 750 751 if (dev == (dev_t)-1) { 752 printf("Not a supported device for swap.\n"); 753 boothowto |= RB_ASKNAME | RB_VERBOSE; 754 goto retry; 755 } 756 757 /* 758 * Ensure that we're not trying to swap on the floppy. 759 */ 760 if (strncmp(ddi_major_to_name(getmajor(dev)), "fd", 2) == 0) { 761 printf("Too dangerous to swap on the floppy\n"); 762 if (boothowto & RB_ASKNAME) 763 goto retry; 764 return (-1); 765 } 766 } 767 768 return (0); 769 } 770 771 772 /* 773 * Load a driver needed to boot. 774 */ 775 static int 776 load_boot_driver(char *drv) 777 { 778 char *drvname; 779 major_t major; 780 #ifdef sparc 781 struct devnames *dnp; 782 ddi_prop_t *propp; 783 char *module; 784 char *dir, *mf; 785 int plen; 786 int mlen; 787 #endif /* sparc */ 788 789 if ((major = ddi_name_to_major(drv)) == DDI_MAJOR_T_NONE) { 790 cmn_err(CE_CONT, "%s: no major number\n", drv); 791 return (-1); 792 } 793 /* 794 * resolve aliases 795 */ 796 drvname = ddi_major_to_name(major); 797 798 #ifdef DEBUG 799 if (strcmp(drv, drvname) == 0) { 800 BMDPRINTF(("load_boot_driver: %s\n", drv)); 801 } else { 802 BMDPRINTF(("load_boot_driver: %s -> %s\n", drv, drvname)); 803 } 804 #endif /* DEBUG */ 805 806 if (modloadonly("drv", drvname) == -1) { 807 cmn_err(CE_CONT, "%s: cannot load driver\n", drvname); 808 return (-1); 809 } 810 811 #ifdef sparc 812 /* 813 * NOTE: this can be removed when newboot-sparc is delivered. 814 * 815 * Check to see if the driver had a 'ddi-forceload' global driver.conf 816 * property to identify additional modules that need to be loaded. 817 * The driver still needs to use ddi_modopen() to open these modules, 818 * but the 'ddi-forceload' property allows the modules to be loaded 819 * into memory prior to lights-out, so that driver ddi_modopen() 820 * calls during lights-out (when mounting root) will work correctly. 821 * Use of 'ddi-forceload' is only required for drivers involved in 822 * getting root mounted. 823 */ 824 dnp = &devnamesp[major]; 825 if (dnp->dn_global_prop_ptr && dnp->dn_global_prop_ptr->prop_list && 826 ((propp = i_ddi_prop_search(DDI_DEV_T_ANY, 827 "ddi-forceload", DDI_PROP_TYPE_STRING, 828 &dnp->dn_global_prop_ptr->prop_list)) != NULL)) { 829 830 module = (char *)propp->prop_val; 831 plen = propp->prop_len; 832 while (plen > 0) { 833 mlen = strlen(module); 834 mf = strrchr(module, '/'); 835 if (mf) { 836 dir = module; 837 *mf++ = '\0'; /* '/' -> '\0' */ 838 } else { 839 dir = "misc"; 840 mf = module; 841 } 842 if (modloadonly(dir, mf) == -1) 843 cmn_err(CE_CONT, 844 "misc/%s: can't load module\n", mf); 845 if (mf != module) 846 *(mf - 1) = '/'; /* '\0' -> '/' */ 847 848 module += mlen + 1; 849 plen -= mlen + 1; 850 } 851 } 852 #endif /* sparc */ 853 854 return (0); 855 } 856 857 858 /* 859 * For a given instance, load that driver and its parents 860 */ 861 static int 862 load_parent_drivers(dev_info_t *dip, char *path) 863 { 864 int rval = 0; 865 major_t major = DDI_MAJOR_T_NONE; 866 char *drv; 867 char *p; 868 869 while (dip) { 870 /* check for path-oriented alias */ 871 if (path) 872 major = ddi_name_to_major(path); 873 else 874 major = DDI_MAJOR_T_NONE; 875 876 if (major != DDI_MAJOR_T_NONE) 877 drv = ddi_major_to_name(major); 878 else 879 drv = ddi_binding_name(dip); 880 881 if (load_boot_driver(drv) != 0) 882 rval = -1; 883 884 dip = ddi_get_parent(dip); 885 if (path) { 886 p = strrchr(path, '/'); 887 if (p) 888 *p = 0; 889 } 890 } 891 892 return (rval); 893 } 894 895 896 /* 897 * For a given path to a boot device, 898 * load that driver and all its parents. 899 */ 900 static int 901 load_bootpath_drivers(char *bootpath) 902 { 903 dev_info_t *dip; 904 char *pathcopy; 905 int pathcopy_len; 906 int rval; 907 char *p; 908 int proplen; 909 char iscsi_network_path[BO_MAXOBJNAME]; 910 911 if (bootpath == NULL || *bootpath == 0) 912 return (-1); 913 914 BMDPRINTF(("load_bootpath_drivers: %s\n", bootpath)); 915 #ifdef _OBP 916 if (netboot_over_iscsi()) { 917 /* iscsi boot */ 918 if (root_is_ramdisk) { 919 if (modloadonly("drv", "ramdisk") < 0) 920 return (-1); 921 } 922 proplen = BOP_GETPROPLEN(bootops, BP_ISCSI_NETWORK_BOOTPATH); 923 if (proplen > 0) { 924 if (BOP_GETPROP(bootops, BP_ISCSI_NETWORK_BOOTPATH, 925 iscsi_network_path) > 0) { 926 p = strchr(iscsi_network_path, ':'); 927 if (p != NULL) { 928 *p = '\0'; 929 } 930 pathcopy = i_ddi_strdup(iscsi_network_path, 931 KM_SLEEP); 932 pathcopy_len = strlen(pathcopy) + 1; 933 } else { 934 return (-1); 935 } 936 } else { 937 return (-1); 938 } 939 } else { 940 #endif 941 pathcopy = i_ddi_strdup(bootpath, KM_SLEEP); 942 pathcopy_len = strlen(pathcopy) + 1; 943 #ifdef _OBP 944 } 945 #endif 946 dip = path_to_devinfo(pathcopy); 947 948 #if defined(__i386) || defined(__amd64) 949 /* 950 * i386 does not provide stub nodes for all boot devices, 951 * but we should be able to find the node for the parent, 952 * and the leaf of the boot path should be the driver name, 953 * which we go ahead and load here. 954 */ 955 if (dip == NULL) { 956 char *leaf; 957 958 /* 959 * Find last slash to build the full path to the 960 * parent of the leaf boot device 961 */ 962 p = strrchr(pathcopy, '/'); 963 *p++ = 0; 964 965 /* 966 * Now isolate the driver name of the leaf device 967 */ 968 leaf = p; 969 p = strchr(leaf, '@'); 970 *p = 0; 971 972 BMDPRINTF(("load_bootpath_drivers: parent=%s leaf=%s\n", 973 bootpath, leaf)); 974 975 dip = path_to_devinfo(pathcopy); 976 if (leaf) { 977 rval = load_boot_driver(leaf, NULL); 978 if (rval == -1) { 979 kmem_free(pathcopy, pathcopy_len); 980 return (NULL); 981 } 982 } 983 } 984 #endif 985 986 if (dip == NULL) { 987 cmn_err(CE_WARN, "can't bind driver for boot path <%s>", 988 bootpath); 989 kmem_free(pathcopy, pathcopy_len); 990 return (NULL); 991 } 992 993 /* 994 * Load IP over IB driver when netbooting over IB. 995 * As per IB 1275 binding, IP over IB is represented as 996 * service on the top of the HCA node. So, there is no 997 * PROM node and generic framework cannot pre-load 998 * IP over IB driver based on the bootpath. The following 999 * code preloads IP over IB driver when doing netboot over 1000 * InfiniBand. 1001 */ 1002 if (netboot_over_ib(bootpath) && 1003 modloadonly("drv", "ibd") == -1) { 1004 cmn_err(CE_CONT, "ibd: cannot load platform driver\n"); 1005 kmem_free(pathcopy, pathcopy_len); 1006 return (NULL); 1007 } 1008 1009 /* 1010 * The PROM node for hubs have incomplete compatible 1011 * properties and therefore do not bind to the hubd driver. 1012 * As a result load_bootpath_drivers() loads the usb_mid driver 1013 * for hub nodes rather than the hubd driver. This causes 1014 * mountroot failures when booting off USB storage. To prevent 1015 * this, if we are booting via USB hubs, we preload the hubd driver. 1016 */ 1017 if (strstr(bootpath, "/hub@") && modloadonly("drv", "hubd") == -1) { 1018 cmn_err(CE_WARN, "bootpath contains a USB hub, " 1019 "but cannot load hubd driver"); 1020 } 1021 1022 /* get rid of minor node at end of copy (if not already done above) */ 1023 p = strrchr(pathcopy, '/'); 1024 if (p) { 1025 p = strchr(p, ':'); 1026 if (p) 1027 *p = 0; 1028 } 1029 1030 rval = load_parent_drivers(dip, pathcopy); 1031 kmem_free(pathcopy, pathcopy_len); 1032 return (rval); 1033 } 1034 1035 1036 1037 1038 /* 1039 * Load drivers required for a platform 1040 * Since all hardware nodes should be available in the device 1041 * tree, walk the per-driver list and load the parents of 1042 * each node found. If not a hardware node, try to load it. 1043 * Pseudo nexus is already loaded. 1044 */ 1045 static int 1046 load_boot_platform_modules(char *drv) 1047 { 1048 major_t major; 1049 dev_info_t *dip; 1050 char *drvname; 1051 int rval = 0; 1052 1053 if ((major = ddi_name_to_major(drv)) == DDI_MAJOR_T_NONE) { 1054 cmn_err(CE_CONT, "%s: no major number\n", drv); 1055 return (-1); 1056 } 1057 1058 /* 1059 * resolve aliases 1060 */ 1061 drvname = ddi_major_to_name(major); 1062 if ((major = ddi_name_to_major(drvname)) == DDI_MAJOR_T_NONE) 1063 return (-1); 1064 1065 #ifdef DEBUG 1066 if (strcmp(drv, drvname) == 0) { 1067 BMDPRINTF(("load_boot_platform_modules: %s\n", drv)); 1068 } else { 1069 BMDPRINTF(("load_boot_platform_modules: %s -> %s\n", 1070 drv, drvname)); 1071 } 1072 #endif /* DEBUG */ 1073 1074 dip = devnamesp[major].dn_head; 1075 if (dip == NULL) { 1076 /* pseudo node, not-enumerated, needs to be loaded */ 1077 if (modloadonly("drv", drvname) == -1) { 1078 cmn_err(CE_CONT, "%s: cannot load platform driver\n", 1079 drvname); 1080 rval = -1; 1081 } 1082 } else { 1083 while (dip) { 1084 if (load_parent_drivers(dip, NULL) != 0) 1085 rval = -1; 1086 dip = ddi_get_next(dip); 1087 } 1088 } 1089 1090 return (rval); 1091 } 1092 1093 1094 /* 1095 * i_find_node: Internal routine used by path_to_devinfo 1096 * to locate a given nodeid in the device tree. 1097 */ 1098 struct i_path_findnode { 1099 pnode_t nodeid; 1100 dev_info_t *dip; 1101 }; 1102 1103 static int 1104 i_path_find_node(dev_info_t *dev, void *arg) 1105 { 1106 struct i_path_findnode *f = (struct i_path_findnode *)arg; 1107 1108 1109 if (ddi_get_nodeid(dev) == (int)f->nodeid) { 1110 f->dip = dev; 1111 return (DDI_WALK_TERMINATE); 1112 } 1113 return (DDI_WALK_CONTINUE); 1114 } 1115 1116 /* 1117 * Return the devinfo node to a boot device 1118 */ 1119 static dev_info_t * 1120 path_to_devinfo(char *path) 1121 { 1122 struct i_path_findnode fn; 1123 extern dev_info_t *top_devinfo; 1124 1125 /* 1126 * Get the nodeid of the given pathname, if such a mapping exists. 1127 */ 1128 fn.dip = NULL; 1129 fn.nodeid = prom_finddevice(path); 1130 if (fn.nodeid != OBP_BADNODE) { 1131 /* 1132 * Find the nodeid in our copy of the device tree and return 1133 * whatever name we used to bind this node to a driver. 1134 */ 1135 ddi_walk_devs(top_devinfo, i_path_find_node, (void *)(&fn)); 1136 } 1137 1138 #ifdef DEBUG 1139 /* 1140 * If we're bound to something other than the nodename, 1141 * note that in the message buffer and system log. 1142 */ 1143 if (fn.dip) { 1144 char *p, *q; 1145 1146 p = ddi_binding_name(fn.dip); 1147 q = ddi_node_name(fn.dip); 1148 if (p && q && (strcmp(p, q) != 0)) { 1149 BMDPRINTF(("path_to_devinfo: %s bound to %s\n", 1150 path, p)); 1151 } 1152 } 1153 #endif /* DEBUG */ 1154 1155 return (fn.dip); 1156 } 1157 1158 /* 1159 * This routine returns B_TRUE if the bootpath corresponds to 1160 * IP over IB driver. 1161 * 1162 * The format of the bootpath for the IP over IB looks like 1163 * /pci@1f,700000/pci@1/ib@0:port=1,pkey=8001,protocol=ip 1164 * 1165 * The minor node portion "port=1,pkey=8001,protocol=ip" represents 1166 * IP over IB driver. 1167 */ 1168 static boolean_t 1169 netboot_over_ib(char *bootpath) 1170 { 1171 1172 char *temp; 1173 boolean_t ret = B_FALSE; 1174 pnode_t node = prom_finddevice(bootpath); 1175 int len; 1176 char devicetype[OBP_MAXDRVNAME]; 1177 1178 /* Is this IB node ? */ 1179 if (node == OBP_BADNODE || node == OBP_NONODE) { 1180 return (B_FALSE); 1181 } 1182 len = prom_getproplen(node, OBP_DEVICETYPE); 1183 if (len <= 1 || len >= OBP_MAXDRVNAME) 1184 return (B_FALSE); 1185 1186 (void) prom_getprop(node, OBP_DEVICETYPE, (caddr_t)devicetype); 1187 1188 if (strncmp("ib", devicetype, 2) == 0) { 1189 /* Check for proper IP over IB string */ 1190 if ((temp = strstr(bootpath, ":port=")) != NULL) { 1191 if ((temp = strstr(temp, ",pkey=")) != NULL) 1192 if ((temp = strstr(temp, 1193 ",protocol=ip")) != NULL) { 1194 ret = B_TRUE; 1195 } 1196 } 1197 } 1198 return (ret); 1199 } 1200 1201 static boolean_t 1202 netboot_over_iscsi(void) 1203 { 1204 int proplen; 1205 boolean_t ret = B_FALSE; 1206 char bootpath[OBP_MAXPATHLEN]; 1207 1208 proplen = BOP_GETPROPLEN(bootops, BP_BOOTPATH); 1209 if (proplen > 0) { 1210 if (BOP_GETPROP(bootops, BP_BOOTPATH, bootpath) > 0) { 1211 if (memcmp(bootpath, BP_ISCSI_DISK, 1212 strlen(BP_ISCSI_DISK)) == 0) { 1213 ret = B_TRUE; 1214 } 1215 } 1216 } 1217 return (ret); 1218 } 1219