1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License, Version 1.0 only 6 * (the "License"). You may not use this file except in compliance 7 * with the License. 8 * 9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 10 * or http://www.opensolaris.org/os/licensing. 11 * See the License for the specific language governing permissions 12 * and limitations under the License. 13 * 14 * When distributing Covered Code, include this CDDL HEADER in each 15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 16 * If applicable, add the following below this CDDL HEADER, with the 17 * fields enclosed by brackets "[]" replaced with your own identifying 18 * information: Portions Copyright [yyyy] [name of copyright owner] 19 * 20 * CDDL HEADER END 21 */ 22 /* 23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27 #pragma ident "%Z%%M% %I% %E% SMI" 28 29 /* 30 * sunpm.c builds sunpm.o "power management framework" 31 * kernel-resident power management code. Implements power management 32 * policy 33 * Assumes: all backwards compat. device components wake up on & 34 * the pm_info pointer in dev_info is initially NULL 35 * 36 * PM - (device) Power Management 37 * 38 * Each device may have 0 or more components. If a device has no components, 39 * then it can't be power managed. Each component has 2 or more 40 * power states. 41 * 42 * "Backwards Compatible" (bc) devices: 43 * There are two different types of devices from the point of view of this 44 * code. The original type, left over from the original PM implementation on 45 * the voyager platform are known in this code as "backwards compatible" 46 * devices (PM_ISBC(dip) returns true). 47 * They are recognized by the pm code by the lack of a pm-components property 48 * and a call made by the driver to pm_create_components(9F). 49 * For these devices, component 0 is special, and represents the power state 50 * of the device. If component 0 is to be set to power level 0 (off), then 51 * the framework must first call into the driver's detach(9E) routine with 52 * DDI_PM_SUSPEND, to get the driver to save the hardware state of the device. 53 * After setting component 0 from 0 to a non-zero power level, a call must be 54 * made into the driver's attach(9E) routine with DDI_PM_RESUME. 55 * 56 * Currently, the only way to get a bc device power managed is via a set of 57 * ioctls (PM_DIRECT_PM, PM_SET_CURRENT_POWER) issued to /dev/pm. 58 * 59 * For non-bc devices, the driver describes the components by exporting a 60 * pm-components(9P) property that tells how many components there are, 61 * tells what each component's power state values are, and provides human 62 * readable strings (currently unused) for each component name and power state. 63 * Devices which export pm-components(9P) are automatically power managed 64 * whenever autopm is enabled (via PM_START_PM ioctl issued by pmconfig(1M) 65 * after parsing power.conf(4)). 66 * For these devices, all components are considered independent of each other, 67 * and it is up to the driver to decide when a transition requires saving or 68 * restoring hardware state. 69 * 70 * Each device component also has a threshold time associated with each power 71 * transition (see power.conf(4)), and a busy/idle state maintained by the 72 * driver calling pm_idle_component(9F) and pm_busy_component(9F). 73 * Components are created idle. 74 * 75 * The PM framework provides several functions: 76 * -implement PM policy as described in power.conf(4) 77 * Policy is set by pmconfig(1M) issuing pm ioctls based on power.conf(4). 78 * Policies consist of: 79 * -set threshold values (defaults if none provided by pmconfig) 80 * -set dependencies among devices 81 * -enable/disable autopm 82 * -turn down idle components based on thresholds (if autopm is enabled) 83 * (aka scanning) 84 * -maintain power states based on dependencies among devices 85 * -upon request, or when the frame buffer powers off, attempt to turn off 86 * all components that are idle or become idle over the next (10 sec) 87 * period in an attempt to get down to an EnergyStar compliant state 88 * -prevent powering off of a device which exported the 89 * pm-no-involuntary-power-cycles property without active involvement of 90 * the device's driver (so no removing power when the device driver is 91 * not attached) 92 * -provide a mechanism for a device driver to request that a device's component 93 * be brought back to the power level necessary for the use of the device 94 * -allow a process to directly control the power levels of device components 95 * (via ioctls issued to /dev/pm--see usr/src/uts/common/io/pm.c) 96 * -ensure that the console frame buffer is powered up before being referenced 97 * via prom_printf() or other prom calls that might generate console output 98 * -maintain implicit dependencies (e.g. parent must be powered up if child is) 99 * -provide "backwards compatible" behavior for devices without pm-components 100 * property 101 * 102 * Scanning: 103 * Whenever autopm is enabled, the framework attempts to bring each component 104 * of each device to its lowest power based on the threshold of idleness 105 * associated with each transition and the busy/idle state of the component. 106 * 107 * The actual work of this is done by pm_scan_dev(), which cycles through each 108 * component of a device, checking its idleness against its current threshold, 109 * and calling pm_set_power() as appropriate to change the power level. 110 * This function also indicates when it would next be profitable to scan the 111 * device again, and a new scan is scheduled after that time. 112 * 113 * Dependencies: 114 * It is possible to establish a dependency between the power states of two 115 * otherwise unrelated devices. This is currently done to ensure that the 116 * cdrom is always up whenever the console framebuffer is up, so that the user 117 * can insert a cdrom and see a popup as a result. 118 * 119 * The dependency terminology used in power.conf(4) is not easy to understand, 120 * so we've adopted a different terminology in the implementation. We write 121 * of a "keeps up" and a "kept up" device. A relationship can be established 122 * where one device keeps up another. That means that if the keepsup device 123 * has any component that is at a non-zero power level, all components of the 124 * "kept up" device must be brought to full power. This relationship is 125 * asynchronous. When the keeping device is powered up, a request is queued 126 * to a worker thread to bring up the kept device. The caller does not wait. 127 * Scan will not turn down a kept up device. 128 * 129 * Direct PM: 130 * A device may be directly power managed by a process. If a device is 131 * directly pm'd, then it will not be scanned, and dependencies will not be 132 * enforced. * If a directly pm'd device's driver requests a power change (via 133 * pm_raise_power(9F)), then the request is blocked and notification is sent 134 * to the controlling process, which must issue the requested power change for 135 * the driver to proceed. 136 * 137 */ 138 139 #include <sys/types.h> 140 #include <sys/errno.h> 141 #include <sys/callb.h> /* callback registration during CPR */ 142 #include <sys/conf.h> /* driver flags and functions */ 143 #include <sys/open.h> /* OTYP_CHR definition */ 144 #include <sys/stat.h> /* S_IFCHR definition */ 145 #include <sys/pathname.h> /* name -> dev_info xlation */ 146 #include <sys/ddi_impldefs.h> /* dev_info node fields */ 147 #include <sys/kmem.h> /* memory alloc stuff */ 148 #include <sys/debug.h> 149 #include <sys/archsystm.h> 150 #include <sys/pm.h> 151 #include <sys/ddi.h> 152 #include <sys/sunddi.h> 153 #include <sys/sunndi.h> 154 #include <sys/sunpm.h> 155 #include <sys/epm.h> 156 #include <sys/vfs.h> 157 #include <sys/mode.h> 158 #include <sys/mkdev.h> 159 #include <sys/promif.h> 160 #include <sys/consdev.h> 161 #include <sys/esunddi.h> 162 #include <sys/modctl.h> 163 #include <sys/fs/ufs_fs.h> 164 #include <sys/note.h> 165 #include <sys/taskq.h> 166 #include <sys/bootconf.h> 167 #include <sys/reboot.h> 168 #include <sys/spl.h> 169 #include <sys/disp.h> 170 #include <sys/sobject.h> 171 #include <sys/sunmdi.h> 172 173 174 /* 175 * PM LOCKING 176 * The list of locks: 177 * Global pm mutex locks. 178 * 179 * pm_scan_lock: 180 * It protects the timeout id of the scan thread, and the value 181 * of autopm_enabled. This lock is not held concurrently with 182 * any other PM locks. 183 * 184 * pm_clone_lock: Protects the clone list and count of poll events 185 * pending for the pm driver. 186 * Lock ordering: 187 * pm_clone_lock -> pm_pscc_interest_rwlock, 188 * pm_clone_lock -> pm_pscc_direct_rwlock. 189 * 190 * pm_rsvp_lock: 191 * Used to synchronize the data structures used for processes 192 * to rendezvous with state change information when doing 193 * direct PM. 194 * Lock ordering: 195 * pm_rsvp_lock -> pm_pscc_interest_rwlock, 196 * pm_rsvp_lock -> pm_pscc_direct_rwlock, 197 * pm_rsvp_lock -> pm_clone_lock. 198 * 199 * ppm_lock: protects the list of registered ppm drivers 200 * Lock ordering: 201 * ppm_lock -> ppm driver unit_lock 202 * 203 * pm_compcnt_lock: 204 * Protects count of components that are not at their lowest 205 * power level. 206 * Lock ordering: 207 * pm_compcnt_lock -> ppm_lock. 208 * 209 * pm_dep_thread_lock: 210 * Protects work list for pm_dep_thread. Not taken concurrently 211 * with any other pm lock. 212 * 213 * pm_remdrv_lock: 214 * Serializes the operation of removing noinvol data structure 215 * entries for a branch of the tree when a driver has been 216 * removed from the system (modctl_rem_major). 217 * Lock ordering: 218 * pm_remdrv_lock -> pm_noinvol_rwlock. 219 * 220 * pm_cfb_lock: (High level spin lock) 221 * Protects the count of how many components of the console 222 * frame buffer are off (so we know if we have to bring up the 223 * console as a result of a prom_printf, etc. 224 * No other locks are taken while holding this lock. 225 * 226 * pm_loan_lock: 227 * Protects the lock_loan list. List is used to record that one 228 * thread has acquired a power lock but has launched another thread 229 * to complete its processing. An entry in the list indicates that 230 * the worker thread can borrow the lock held by the other thread, 231 * which must block on the completion of the worker. Use is 232 * specific to module loading. 233 * No other locks are taken while holding this lock. 234 * 235 * Global PM rwlocks 236 * 237 * pm_thresh_rwlock: 238 * Protects the list of thresholds recorded for future use (when 239 * devices attach). 240 * Lock ordering: 241 * pm_thresh_rwlock -> devi_pm_lock 242 * 243 * pm_noinvol_rwlock: 244 * Protects list of detached nodes that had noinvol registered. 245 * No other PM locks are taken while holding pm_noinvol_rwlock. 246 * 247 * pm_pscc_direct_rwlock: 248 * Protects the list that maps devices being directly power 249 * managed to the processes that manage them. 250 * Lock ordering: 251 * pm_pscc_direct_rwlock -> psce_lock 252 * 253 * pm_pscc_interest_rwlock; 254 * Protects the list that maps state change events to processes 255 * that want to know about them. 256 * Lock ordering: 257 * pm_pscc_interest_rwlock -> psce_lock 258 * 259 * per-dip locks: 260 * 261 * Each node has these per-dip locks, which are only used if the device is 262 * a candidate for power management (e.g. has pm components) 263 * 264 * devi_pm_lock: 265 * Protects all power management state of the node except for 266 * power level, which is protected by ndi_devi_enter(). 267 * Encapsulated in macros PM_LOCK_DIP()/PM_UNLOCK_DIP(). 268 * Lock ordering: 269 * devi_pm_lock -> pm_rsvp_lock, 270 * devi_pm_lock -> pm_dep_thread_lock, 271 * devi_pm_lock -> pm_noinvol_rwlock, 272 * devi_pm_lock -> power lock 273 * 274 * power lock (ndi_devi_enter()): 275 * Since changing power level is possibly a slow operation (30 276 * seconds to spin up a disk drive), this is locked separately. 277 * Since a call into the driver to change the power level of one 278 * component may result in a call back into the framework to change 279 * the power level of another, this lock allows re-entrancy by 280 * the same thread (ndi_devi_enter is used for this because 281 * the USB framework uses ndi_devi_enter in its power entry point, 282 * and use of any other lock would produce a deadlock. 283 * 284 * devi_pm_busy_lock: 285 * This lock protects the integrity of the busy count. It is 286 * only taken by pm_busy_component() and pm_idle_component and 287 * some code that adjust the busy time after the timer gets set 288 * up or after a CPR operation. It is per-dip to keep from 289 * single-threading all the disk drivers on a system. 290 * It could be per component instead, but most devices have 291 * only one component. 292 * No other PM locks are taken while holding this lock. 293 * 294 */ 295 296 static int stdout_is_framebuffer; 297 static kmutex_t e_pm_power_lock; 298 static kmutex_t pm_loan_lock; 299 kmutex_t pm_scan_lock; 300 callb_id_t pm_cpr_cb_id; 301 callb_id_t pm_panic_cb_id; 302 callb_id_t pm_halt_cb_id; 303 int pm_comps_notlowest; /* no. of comps not at lowest power */ 304 int pm_powering_down; /* cpr is source of DDI_SUSPEND calls */ 305 306 clock_t pm_min_scan = PM_MIN_SCAN; 307 clock_t pm_id_ticks = 5; /* ticks to wait before scan during idle-down */ 308 309 static int pm_busop_set_power(dev_info_t *, 310 void *, pm_bus_power_op_t, void *, void *); 311 static int pm_busop_match_request(dev_info_t *, void *); 312 static int pm_all_to_normal_nexus(dev_info_t *, pm_canblock_t); 313 314 /* 315 * Dependency Processing is done thru a seperate thread. 316 */ 317 kmutex_t pm_dep_thread_lock; 318 kcondvar_t pm_dep_thread_cv; 319 pm_dep_wk_t *pm_dep_thread_workq = NULL; 320 pm_dep_wk_t *pm_dep_thread_tail = NULL; 321 322 /* 323 * Autopm must be turned on by a PM_START_PM ioctl, so we don't end up 324 * power managing things in single user mode that have been suppressed via 325 * power.conf entries. Protected by pm_scan_lock. 326 */ 327 int autopm_enabled; 328 329 /* 330 * This flag is true while processes are stopped for a checkpoint/resume. 331 * Controlling processes of direct pm'd devices are not available to 332 * participate in power level changes, so we bypass them when this is set. 333 */ 334 static int pm_processes_stopped; 335 336 #ifdef DEBUG 337 338 /* 339 * see common/sys/epm.h for PMD_* values 340 */ 341 uint_t pm_debug = 0; 342 343 /* 344 * If pm_divertdebug is set, then no prom_printf calls will be made by 345 * PMD(), which will prevent debug output from bringing up the console 346 * frame buffer. Clearing this variable before setting pm_debug will result 347 * in PMD output going to the console. 348 * 349 * pm_divertdebug is incremented in pm_set_power() if dip == cfb_dip to avoid 350 * deadlocks and decremented at the end of pm_set_power() 351 */ 352 uint_t pm_divertdebug = 1; 353 kmutex_t pm_debug_lock; /* protects pm_divertdebug */ 354 355 void prdeps(char *); 356 #endif 357 358 /* Globals */ 359 360 /* 361 * List of recorded thresholds and dependencies 362 */ 363 pm_thresh_rec_t *pm_thresh_head; 364 krwlock_t pm_thresh_rwlock; 365 366 pm_pdr_t *pm_dep_head; 367 static int pm_unresolved_deps = 0; 368 static int pm_prop_deps = 0; 369 370 /* 371 * List of devices that exported no-involuntary-power-cycles property 372 */ 373 pm_noinvol_t *pm_noinvol_head; 374 375 /* 376 * Locks used in noinvol processing 377 */ 378 krwlock_t pm_noinvol_rwlock; 379 kmutex_t pm_remdrv_lock; 380 381 int pm_default_idle_threshold = PM_DEFAULT_SYS_IDLENESS; 382 int pm_system_idle_threshold; 383 /* 384 * By default nexus has 0 threshold, and depends on its children to keep it up 385 */ 386 int pm_default_nexus_threshold = 0; 387 388 /* 389 * Data structures shared with common/io/pm.c 390 */ 391 kmutex_t pm_clone_lock; 392 kcondvar_t pm_clones_cv[PM_MAX_CLONE]; 393 uint_t pm_poll_cnt[PM_MAX_CLONE]; /* count of events for poll */ 394 unsigned char pm_interest[PM_MAX_CLONE]; 395 struct pollhead pm_pollhead; 396 397 extern int hz; 398 extern char *platform_module_list[]; 399 400 /* 401 * Wrappers for use in ddi_walk_devs 402 */ 403 404 static int pm_set_dev_thr_walk(dev_info_t *, void *); 405 static int pm_restore_direct_lvl_walk(dev_info_t *, void *); 406 static int pm_save_direct_lvl_walk(dev_info_t *, void *); 407 static int pm_discard_dep_walk(dev_info_t *, void *); 408 #ifdef DEBUG 409 static int pm_desc_pwrchk_walk(dev_info_t *, void *); 410 #endif 411 412 /* 413 * Routines for managing noinvol devices 414 */ 415 int pm_noinvol_update(int, int, int, char *, dev_info_t *); 416 void pm_noinvol_update_node(dev_info_t *, 417 pm_bp_noinvol_t *req); 418 419 kmutex_t pm_rsvp_lock; 420 kmutex_t pm_compcnt_lock; 421 krwlock_t pm_pscc_direct_rwlock; 422 krwlock_t pm_pscc_interest_rwlock; 423 424 #define PSC_INTEREST 0 /* belongs to interest psc list */ 425 #define PSC_DIRECT 1 /* belongs to direct psc list */ 426 427 pscc_t *pm_pscc_interest; 428 pscc_t *pm_pscc_direct; 429 430 #define PM_MAJOR(dip) ddi_name_to_major(ddi_binding_name(dip)) 431 #define PM_IS_NEXUS(dip) NEXUS_DRV(devopsp[PM_MAJOR(dip)]) 432 #define POWERING_ON(old, new) ((old) == 0 && (new) != 0) 433 #define POWERING_OFF(old, new) ((old) != 0 && (new) == 0) 434 #define PPM(dip) ((dev_info_t *)DEVI(dip)->devi_pm_ppm) 435 436 #define PM_INCR_NOTLOWEST(dip) { \ 437 mutex_enter(&pm_compcnt_lock); \ 438 if (!PM_IS_NEXUS(dip) || \ 439 (DEVI(dip)->devi_pm_flags & (PMC_DEV_THRESH|PMC_COMP_THRESH))) {\ 440 if (pm_comps_notlowest == 0) \ 441 pm_ppm_notify_all_lowest(dip, PM_NOT_ALL_LOWEST);\ 442 pm_comps_notlowest++; \ 443 PMD(PMD_LEVEL, ("%s: %s@%s(%s#%d) incr notlowest->%d\n",\ 444 pmf, PM_DEVICE(dip), pm_comps_notlowest)) \ 445 } \ 446 mutex_exit(&pm_compcnt_lock); \ 447 } 448 #define PM_DECR_NOTLOWEST(dip) { \ 449 mutex_enter(&pm_compcnt_lock); \ 450 if (!PM_IS_NEXUS(dip) || \ 451 (DEVI(dip)->devi_pm_flags & (PMC_DEV_THRESH|PMC_COMP_THRESH))) {\ 452 ASSERT(pm_comps_notlowest); \ 453 pm_comps_notlowest--; \ 454 PMD(PMD_LEVEL, ("%s: %s@%s(%s#%d) decr notlowest to " \ 455 "%d\n", pmf, PM_DEVICE(dip), pm_comps_notlowest))\ 456 if (pm_comps_notlowest == 0) \ 457 pm_ppm_notify_all_lowest(dip, PM_ALL_LOWEST); \ 458 } \ 459 mutex_exit(&pm_compcnt_lock); \ 460 } 461 462 /* 463 * console frame-buffer power-management is not enabled when 464 * debugging services are present. to override, set pm_cfb_override 465 * to non-zero. 466 */ 467 uint_t pm_cfb_comps_off = 0; /* PM_LEVEL_UNKNOWN is considered on */ 468 kmutex_t pm_cfb_lock; 469 int pm_cfb_enabled = 1; /* non-zero allows pm of console frame buffer */ 470 #ifdef DEBUG 471 int pm_cfb_override = 1; /* non-zero allows pm of cfb with debuggers */ 472 #else 473 int pm_cfb_override = 0; /* non-zero allows pm of cfb with debuggers */ 474 #endif 475 476 static dev_info_t *cfb_dip = 0; 477 static dev_info_t *cfb_dip_detaching = 0; 478 uint_t cfb_inuse = 0; 479 static ddi_softintr_t pm_soft_id; 480 static clock_t pm_soft_pending; 481 int pm_scans_disabled = 0; 482 483 /* 484 * A structure to record the fact that one thread has borrowed a lock held 485 * by another thread. The context requires that the lender block on the 486 * completion of the borrower. 487 */ 488 typedef struct lock_loan { 489 struct lock_loan *pmlk_next; 490 kthread_t *pmlk_borrower; 491 kthread_t *pmlk_lender; 492 dev_info_t *pmlk_dip; 493 } lock_loan_t; 494 static lock_loan_t lock_loan_head; /* list head is a dummy element */ 495 496 #ifdef DEBUG 497 #define PMD_FUNC(func, name) char *(func) = (name); 498 #else 499 #define PMD_FUNC(func, name) 500 #endif 501 502 503 /* 504 * Must be called before first device (including pseudo) attach 505 */ 506 void 507 pm_init_locks(void) 508 { 509 mutex_init(&pm_scan_lock, NULL, MUTEX_DRIVER, NULL); 510 mutex_init(&pm_rsvp_lock, NULL, MUTEX_DRIVER, NULL); 511 mutex_init(&pm_compcnt_lock, NULL, MUTEX_DRIVER, NULL); 512 mutex_init(&pm_dep_thread_lock, NULL, MUTEX_DRIVER, NULL); 513 mutex_init(&pm_remdrv_lock, NULL, MUTEX_DRIVER, NULL); 514 mutex_init(&pm_loan_lock, NULL, MUTEX_DRIVER, NULL); 515 rw_init(&pm_thresh_rwlock, NULL, RW_DEFAULT, NULL); 516 rw_init(&pm_noinvol_rwlock, NULL, RW_DEFAULT, NULL); 517 cv_init(&pm_dep_thread_cv, NULL, CV_DEFAULT, NULL); 518 } 519 520 static boolean_t 521 pm_cpr_callb(void *arg, int code) 522 { 523 _NOTE(ARGUNUSED(arg)) 524 static int auto_save; 525 static int pm_reset_timestamps(dev_info_t *, void *); 526 527 switch (code) { 528 case CB_CODE_CPR_CHKPT: 529 /* 530 * Cancel scan or wait for scan in progress to finish 531 * Other threads may be trying to restart the scan, so we 532 * have to keep at it unil it sticks 533 */ 534 mutex_enter(&pm_scan_lock); 535 ASSERT(!pm_scans_disabled); 536 pm_scans_disabled = 1; 537 auto_save = autopm_enabled; 538 autopm_enabled = 0; 539 mutex_exit(&pm_scan_lock); 540 ddi_walk_devs(ddi_root_node(), pm_scan_stop_walk, NULL); 541 break; 542 543 case CB_CODE_CPR_RESUME: 544 ASSERT(!autopm_enabled); 545 ASSERT(pm_scans_disabled); 546 pm_scans_disabled = 0; 547 /* 548 * Call pm_reset_timestamps to reset timestamps of each 549 * device to the time when the system is resumed so that their 550 * idleness can be re-calculated. That's to avoid devices from 551 * being powered down right after resume if the system was in 552 * suspended mode long enough. 553 */ 554 ddi_walk_devs(ddi_root_node(), pm_reset_timestamps, NULL); 555 556 autopm_enabled = auto_save; 557 /* 558 * If there is any auto-pm device, get the scanning 559 * going. Otherwise don't bother. 560 */ 561 ddi_walk_devs(ddi_root_node(), pm_rescan_walk, NULL); 562 break; 563 } 564 return (B_TRUE); 565 } 566 567 /* 568 * This callback routine is called when there is a system panic. This function 569 * exists for prototype matching. 570 */ 571 static boolean_t 572 pm_panic_callb(void *arg, int code) 573 { 574 _NOTE(ARGUNUSED(arg, code)) 575 void pm_cfb_check_and_powerup(void); 576 PMD(PMD_CFB, ("pm_panic_callb\n")) 577 pm_cfb_check_and_powerup(); 578 return (B_TRUE); 579 } 580 581 static boolean_t 582 pm_halt_callb(void *arg, int code) 583 { 584 _NOTE(ARGUNUSED(arg, code)) 585 return (B_TRUE); /* XXX for now */ 586 } 587 588 /* 589 * This needs to be called after the root and platform drivers are loaded 590 * and be single-threaded with respect to driver attach/detach 591 */ 592 void 593 pm_init(void) 594 { 595 PMD_FUNC(pmf, "pm_init") 596 char **mod; 597 extern pri_t minclsyspri; 598 static void pm_dep_thread(void); 599 600 pm_comps_notlowest = 0; 601 pm_system_idle_threshold = pm_default_idle_threshold; 602 603 pm_cpr_cb_id = callb_add(pm_cpr_callb, (void *)NULL, 604 CB_CL_CPR_PM, "pm_cpr"); 605 pm_panic_cb_id = callb_add(pm_panic_callb, (void *)NULL, 606 CB_CL_PANIC, "pm_panic"); 607 pm_halt_cb_id = callb_add(pm_halt_callb, (void *)NULL, 608 CB_CL_HALT, "pm_halt"); 609 610 /* 611 * Create a thread to do dependency processing. 612 */ 613 (void) thread_create(NULL, 0, (void (*)())pm_dep_thread, NULL, 0, &p0, 614 TS_RUN, minclsyspri); 615 616 /* 617 * loadrootmodules already loaded these ppm drivers, now get them 618 * attached so they can claim the root drivers as they attach 619 */ 620 for (mod = platform_module_list; *mod; mod++) { 621 if (i_ddi_attach_hw_nodes(*mod) != DDI_SUCCESS) { 622 cmn_err(CE_WARN, "!cannot load platform pm driver %s\n", 623 *mod); 624 } else { 625 PMD(PMD_DHR, ("%s: %s (%s)\n", pmf, *mod, 626 ddi_major_to_name(ddi_name_to_major(*mod)))) 627 } 628 } 629 } 630 631 /* 632 * pm_scan_init - create pm scan data structure. Called (if autopm enabled) 633 * when device becomes power managed or after a failed detach and when autopm 634 * is started via PM_START_PM ioctl, and after a CPR resume to get all the 635 * devices scanning again. 636 */ 637 void 638 pm_scan_init(dev_info_t *dip) 639 { 640 PMD_FUNC(pmf, "scan_init") 641 pm_scan_t *scanp; 642 643 ASSERT(!PM_ISBC(dip)); 644 645 PM_LOCK_DIP(dip); 646 scanp = PM_GET_PM_SCAN(dip); 647 if (!scanp) { 648 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): create scan data\n", 649 pmf, PM_DEVICE(dip))) 650 scanp = kmem_zalloc(sizeof (pm_scan_t), KM_SLEEP); 651 DEVI(dip)->devi_pm_scan = scanp; 652 } else if (scanp->ps_scan_flags & PM_SCAN_STOP) { 653 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): " 654 "clear PM_SCAN_STOP flag\n", pmf, PM_DEVICE(dip))) 655 scanp->ps_scan_flags &= ~PM_SCAN_STOP; 656 } 657 PM_UNLOCK_DIP(dip); 658 } 659 660 /* 661 * pm_scan_fini - remove pm scan data structure when stopping pm on the device 662 */ 663 void 664 pm_scan_fini(dev_info_t *dip) 665 { 666 PMD_FUNC(pmf, "scan_fini") 667 pm_scan_t *scanp; 668 669 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 670 ASSERT(!PM_ISBC(dip)); 671 PM_LOCK_DIP(dip); 672 scanp = PM_GET_PM_SCAN(dip); 673 if (!scanp) { 674 PM_UNLOCK_DIP(dip); 675 return; 676 } 677 678 ASSERT(!scanp->ps_scan_id && !(scanp->ps_scan_flags & 679 (PM_SCANNING | PM_SCAN_DISPATCHED | PM_SCAN_AGAIN))); 680 681 kmem_free(scanp, sizeof (pm_scan_t)); 682 DEVI(dip)->devi_pm_scan = NULL; 683 PM_UNLOCK_DIP(dip); 684 } 685 686 /* 687 * Given a pointer to a component struct, return the current power level 688 * (struct contains index unless it is a continuous level). 689 * Located here in hopes of getting both this and dev_is_needed into the 690 * cache together 691 */ 692 static int 693 cur_power(pm_component_t *cp) 694 { 695 if (cp->pmc_cur_pwr == PM_LEVEL_UNKNOWN) 696 return (cp->pmc_cur_pwr); 697 698 return (cp->pmc_comp.pmc_lvals[cp->pmc_cur_pwr]); 699 } 700 701 static char * 702 pm_decode_direction(int direction) 703 { 704 switch (direction) { 705 case PM_LEVEL_UPONLY: 706 return ("up"); 707 708 case PM_LEVEL_EXACT: 709 return ("exact"); 710 711 case PM_LEVEL_DOWNONLY: 712 return ("down"); 713 714 default: 715 return ("INVALID DIRECTION"); 716 } 717 } 718 719 char * 720 pm_decode_op(pm_bus_power_op_t op) 721 { 722 switch (op) { 723 case BUS_POWER_CHILD_PWRCHG: 724 return ("CHILD_PWRCHG"); 725 case BUS_POWER_NEXUS_PWRUP: 726 return ("NEXUS_PWRUP"); 727 case BUS_POWER_PRE_NOTIFICATION: 728 return ("PRE_NOTIFICATION"); 729 case BUS_POWER_POST_NOTIFICATION: 730 return ("POST_NOTIFICATION"); 731 case BUS_POWER_HAS_CHANGED: 732 return ("HAS_CHANGED"); 733 case BUS_POWER_NOINVOL: 734 return ("NOINVOL"); 735 default: 736 return ("UNKNOWN OP"); 737 } 738 } 739 740 /* 741 * Returns true if level is a possible (valid) power level for component 742 */ 743 int 744 e_pm_valid_power(dev_info_t *dip, int cmpt, int level) 745 { 746 PMD_FUNC(pmf, "e_pm_valid_power") 747 pm_component_t *cp = PM_CP(dip, cmpt); 748 int i; 749 int *ip = cp->pmc_comp.pmc_lvals; 750 int limit = cp->pmc_comp.pmc_numlevels; 751 752 if (level < 0) 753 return (0); 754 for (i = 0; i < limit; i++) { 755 if (level == *ip++) 756 return (1); 757 } 758 #ifdef DEBUG 759 if (pm_debug & PMD_FAIL) { 760 ip = cp->pmc_comp.pmc_lvals; 761 762 for (i = 0; i < limit; i++) 763 PMD(PMD_FAIL, ("%s: index=%d, level=%d\n", 764 pmf, i, *ip++)) 765 } 766 #endif 767 return (0); 768 } 769 770 /* 771 * Returns true if device is pm'd (after calling pm_start if need be) 772 */ 773 int 774 e_pm_valid_info(dev_info_t *dip, pm_info_t **infop) 775 { 776 pm_info_t *info; 777 static int pm_start(dev_info_t *dip); 778 779 /* 780 * Check if the device is power managed if not. 781 * To make the common case (device is power managed already) 782 * fast, we check without the lock. If device is not already 783 * power managed, then we take the lock and the long route through 784 * go get it managed. Devices never go unmanaged until they 785 * detach. 786 */ 787 info = PM_GET_PM_INFO(dip); 788 if (!info) { 789 if (!DEVI_IS_ATTACHING(dip)) { 790 return (0); 791 } 792 if (pm_start(dip) != DDI_SUCCESS) { 793 return (0); 794 } 795 info = PM_GET_PM_INFO(dip); 796 } 797 ASSERT(info); 798 if (infop != NULL) 799 *infop = info; 800 return (1); 801 } 802 803 int 804 e_pm_valid_comp(dev_info_t *dip, int cmpt, pm_component_t **cpp) 805 { 806 if (cmpt >= 0 && cmpt < PM_NUMCMPTS(dip)) { 807 if (cpp != NULL) 808 *cpp = PM_CP(dip, cmpt); 809 return (1); 810 } else { 811 return (0); 812 } 813 } 814 815 /* 816 * Internal guts of ddi_dev_is_needed and pm_raise/lower_power 817 */ 818 static int 819 dev_is_needed(dev_info_t *dip, int cmpt, int level, int direction) 820 { 821 PMD_FUNC(pmf, "din") 822 pm_component_t *cp; 823 char *pathbuf; 824 int result; 825 826 ASSERT(direction == PM_LEVEL_UPONLY || direction == PM_LEVEL_DOWNONLY); 827 if (!e_pm_valid_info(dip, NULL) || !e_pm_valid_comp(dip, cmpt, &cp) || 828 !e_pm_valid_power(dip, cmpt, level)) 829 return (DDI_FAILURE); 830 831 PMD(PMD_DIN, ("%s: %s@%s(%s#%d) cmpt=%d, dir=%s, new=%d, cur=%d\n", 832 pmf, PM_DEVICE(dip), cmpt, pm_decode_direction(direction), 833 level, cur_power(cp))) 834 835 if (pm_set_power(dip, cmpt, level, direction, 836 PM_CANBLOCK_BLOCK, 0, &result) != DDI_SUCCESS) { 837 if (direction == PM_LEVEL_UPONLY) { 838 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 839 (void) ddi_pathname(dip, pathbuf); 840 cmn_err(CE_WARN, "Device %s failed to power up.", 841 pathbuf); 842 kmem_free(pathbuf, MAXPATHLEN); 843 } 844 PMD(PMD_DIN | PMD_FAIL, ("%s: %s@%s(%s#%d) [%d] %s->%d failed, " 845 "errno %d\n", pmf, PM_DEVICE(dip), cmpt, 846 pm_decode_direction(direction), level, result)) 847 return (DDI_FAILURE); 848 } 849 850 PMD(PMD_RESCAN | PMD_DIN, ("%s: pm_rescan %s@%s(%s#%d)\n", pmf, 851 PM_DEVICE(dip))) 852 pm_rescan(dip); 853 return (DDI_SUCCESS); 854 } 855 856 /* 857 * We can get multiple pm_rescan() threads, if one of them discovers 858 * that no scan is running at the moment, it kicks it into action. 859 * Otherwise, it tells the current scanning thread to scan again when 860 * it is done by asserting the PM_SCAN_AGAIN flag. The PM_SCANNING and 861 * PM_SCAN_AGAIN flags are used to regulate scan, to make sure only one 862 * thread at a time runs the pm_scan_dev() code. 863 */ 864 void 865 pm_rescan(void *arg) 866 { 867 PMD_FUNC(pmf, "rescan") 868 dev_info_t *dip = (dev_info_t *)arg; 869 pm_info_t *info; 870 pm_scan_t *scanp; 871 timeout_id_t scanid; 872 873 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 874 PM_LOCK_DIP(dip); 875 info = PM_GET_PM_INFO(dip); 876 scanp = PM_GET_PM_SCAN(dip); 877 if (pm_scans_disabled || !autopm_enabled || !info || !scanp || 878 (scanp->ps_scan_flags & PM_SCAN_STOP)) { 879 PM_UNLOCK_DIP(dip); 880 return; 881 } 882 if (scanp->ps_scan_flags & PM_SCANNING) { 883 scanp->ps_scan_flags |= PM_SCAN_AGAIN; 884 PM_UNLOCK_DIP(dip); 885 return; 886 } else if (scanp->ps_scan_id) { 887 scanid = scanp->ps_scan_id; 888 scanp->ps_scan_id = 0; 889 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): cancel timeout scanid %lx\n", 890 pmf, PM_DEVICE(dip), (ulong_t)scanid)) 891 PM_UNLOCK_DIP(dip); 892 (void) untimeout(scanid); 893 PM_LOCK_DIP(dip); 894 } 895 896 /* 897 * Dispatching pm_scan during attach time is risky due to the fact that 898 * attach might soon fail and dip dissolved, and panic may happen while 899 * attempting to stop scan. So schedule a pm_rescan instead. 900 * (Note that if either of the first two terms are true, taskq_dispatch 901 * will not be invoked). 902 * 903 * Multiple pm_scan dispatching is unecessary and costly to keep track 904 * of. The PM_SCAN_DISPATCHED flag is used between pm_rescan and pm_scan 905 * to regulate the dispatching. 906 * 907 * Scan is stopped before the device is detached (in pm_detaching()) 908 * but it may get re-started during the post_detach processing if the 909 * driver fails to detach. 910 */ 911 if (DEVI_IS_ATTACHING(dip) || 912 (scanp->ps_scan_flags & PM_SCAN_DISPATCHED) || 913 !taskq_dispatch(system_taskq, pm_scan, (void *)dip, TQ_NOSLEEP)) { 914 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): attaching, pm_scan already " 915 "dispatched or dispatching failed\n", pmf, PM_DEVICE(dip))) 916 if (scanp->ps_scan_id) { 917 scanid = scanp->ps_scan_id; 918 scanp->ps_scan_id = 0; 919 PM_UNLOCK_DIP(dip); 920 (void) untimeout(scanid); 921 PM_LOCK_DIP(dip); 922 if (scanp->ps_scan_id) { 923 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): a competing " 924 "thread scheduled pm_rescan, scanid %lx\n", 925 pmf, PM_DEVICE(dip), 926 (ulong_t)scanp->ps_scan_id)) 927 PM_UNLOCK_DIP(dip); 928 return; 929 } 930 } 931 scanp->ps_scan_id = timeout(pm_rescan, (void *)dip, 932 (scanp->ps_idle_down ? pm_id_ticks : 933 (pm_min_scan * hz))); 934 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): scheduled next pm_rescan, " 935 "scanid %lx\n", pmf, PM_DEVICE(dip), 936 (ulong_t)scanp->ps_scan_id)) 937 } else { 938 PMD(PMD_SCAN, ("%s: dispatched pm_scan for %s@%s(%s#%d)\n", 939 pmf, PM_DEVICE(dip))) 940 scanp->ps_scan_flags |= PM_SCAN_DISPATCHED; 941 } 942 PM_UNLOCK_DIP(dip); 943 } 944 945 void 946 pm_scan(void *arg) 947 { 948 PMD_FUNC(pmf, "scan") 949 dev_info_t *dip = (dev_info_t *)arg; 950 pm_scan_t *scanp; 951 time_t nextscan; 952 953 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 954 955 PM_LOCK_DIP(dip); 956 scanp = PM_GET_PM_SCAN(dip); 957 ASSERT(scanp && PM_GET_PM_INFO(dip)); 958 959 if (pm_scans_disabled || !autopm_enabled || 960 (scanp->ps_scan_flags & PM_SCAN_STOP)) { 961 scanp->ps_scan_flags &= ~(PM_SCAN_AGAIN | PM_SCAN_DISPATCHED); 962 PM_UNLOCK_DIP(dip); 963 return; 964 } 965 966 if (scanp->ps_idle_down) { 967 /* 968 * make sure we remember idledown was in affect until 969 * we've completed the scan 970 */ 971 PMID_SET_SCANS(scanp->ps_idle_down) 972 PMD(PMD_IDLEDOWN, ("%s: %s@%s(%s#%d): idledown starts " 973 "(pmid %x)\n", pmf, PM_DEVICE(dip), scanp->ps_idle_down)) 974 } 975 976 /* possible having two threads running pm_scan() */ 977 if (scanp->ps_scan_flags & PM_SCANNING) { 978 scanp->ps_scan_flags |= PM_SCAN_AGAIN; 979 PMD(PMD_SCAN, ("%s: scanning, will scan %s@%s(%s#%d) again\n", 980 pmf, PM_DEVICE(dip))) 981 scanp->ps_scan_flags &= ~PM_SCAN_DISPATCHED; 982 PM_UNLOCK_DIP(dip); 983 return; 984 } 985 986 scanp->ps_scan_flags |= PM_SCANNING; 987 scanp->ps_scan_flags &= ~PM_SCAN_DISPATCHED; 988 do { 989 scanp->ps_scan_flags &= ~PM_SCAN_AGAIN; 990 PM_UNLOCK_DIP(dip); 991 nextscan = pm_scan_dev(dip); 992 PM_LOCK_DIP(dip); 993 } while (scanp->ps_scan_flags & PM_SCAN_AGAIN); 994 995 ASSERT(scanp->ps_scan_flags & PM_SCANNING); 996 scanp->ps_scan_flags &= ~PM_SCANNING; 997 998 if (scanp->ps_idle_down) { 999 scanp->ps_idle_down &= ~PMID_SCANS; 1000 PMD(PMD_IDLEDOWN, ("%s: %s@%s(%s#%d): idledown ends " 1001 "(pmid %x)\n", pmf, PM_DEVICE(dip), scanp->ps_idle_down)) 1002 } 1003 1004 /* schedule for next idle check */ 1005 if (nextscan != LONG_MAX) { 1006 if (nextscan > (LONG_MAX / hz)) 1007 nextscan = (LONG_MAX - 1) / hz; 1008 if (scanp->ps_scan_id) { 1009 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): while scanning " 1010 "another rescan scheduled scanid(%lx)\n", pmf, 1011 PM_DEVICE(dip), (ulong_t)scanp->ps_scan_id)) 1012 PM_UNLOCK_DIP(dip); 1013 return; 1014 } else if (!(scanp->ps_scan_flags & PM_SCAN_STOP)) { 1015 scanp->ps_scan_id = timeout(pm_rescan, (void *)dip, 1016 (clock_t)(nextscan * hz)); 1017 PMD(PMD_SCAN, ("%s: nextscan for %s@%s(%s#%d) in " 1018 "%lx sec, scanid(%lx) \n", pmf, PM_DEVICE(dip), 1019 (ulong_t)nextscan, (ulong_t)scanp->ps_scan_id)) 1020 } 1021 } 1022 PM_UNLOCK_DIP(dip); 1023 } 1024 1025 void 1026 pm_get_timestamps(dev_info_t *dip, time_t *valuep) 1027 { 1028 int components = PM_NUMCMPTS(dip); 1029 int i; 1030 1031 ASSERT(components > 0); 1032 PM_LOCK_BUSY(dip); /* so we get a consistent view */ 1033 for (i = 0; i < components; i++) { 1034 valuep[i] = PM_CP(dip, i)->pmc_timestamp; 1035 } 1036 PM_UNLOCK_BUSY(dip); 1037 } 1038 1039 /* 1040 * Returns true if device needs to be kept up because it exported the 1041 * "no-involuntary-power-cycles" property or we're pretending it did (console 1042 * fb case) or it is an ancestor of such a device and has used up the "one 1043 * free cycle" allowed when all such leaf nodes have voluntarily powered down 1044 * upon detach 1045 */ 1046 int 1047 pm_noinvol(dev_info_t *dip) 1048 { 1049 PMD_FUNC(pmf, "noinvol") 1050 1051 /* 1052 * This doesn't change over the life of a driver, so no locking needed 1053 */ 1054 if (PM_IS_CFB(dip)) { 1055 PMD(PMD_NOINVOL | PMD_CFB, ("%s: inhibits CFB %s@%s(%s#%d)\n", 1056 pmf, PM_DEVICE(dip))) 1057 return (1); 1058 } 1059 /* 1060 * Not an issue if no such kids 1061 */ 1062 if (DEVI(dip)->devi_pm_noinvolpm == 0) { 1063 #ifdef DEBUG 1064 if (DEVI(dip)->devi_pm_volpmd != 0) { 1065 dev_info_t *pdip = dip; 1066 do { 1067 PMD(PMD_NOINVOL, ("%s: %s@%s(%s#%d) noinvol %d " 1068 "volpmd %d\n", pmf, PM_DEVICE(pdip), 1069 DEVI(pdip)->devi_pm_noinvolpm, 1070 DEVI(pdip)->devi_pm_volpmd)) 1071 pdip = ddi_get_parent(pdip); 1072 } while (pdip); 1073 } 1074 #endif 1075 ASSERT(DEVI(dip)->devi_pm_volpmd == 0); 1076 return (0); 1077 } 1078 1079 /* 1080 * Since we now maintain the counts correct at every node, we no longer 1081 * need to look up the tree. An ancestor cannot use up the free cycle 1082 * without the children getting their counts adjusted. 1083 */ 1084 1085 #ifdef DEBUG 1086 if (DEVI(dip)->devi_pm_noinvolpm != DEVI(dip)->devi_pm_volpmd) 1087 PMD(PMD_NOINVOL, ("%s: (%d != %d) inhibits %s@%s(%s#%d)\n", pmf, 1088 DEVI(dip)->devi_pm_noinvolpm, DEVI(dip)->devi_pm_volpmd, 1089 PM_DEVICE(dip))) 1090 #endif 1091 return (DEVI(dip)->devi_pm_noinvolpm != DEVI(dip)->devi_pm_volpmd); 1092 } 1093 1094 /* 1095 * This function performs the actual scanning of the device. 1096 * It attempts to power off the indicated device's components if they have 1097 * been idle and other restrictions are met. 1098 * pm_scan_dev calculates and returns when the next scan should happen for 1099 * this device. 1100 */ 1101 time_t 1102 pm_scan_dev(dev_info_t *dip) 1103 { 1104 PMD_FUNC(pmf, "scan_dev") 1105 pm_scan_t *scanp; 1106 time_t *timestamp, idletime, now, thresh; 1107 time_t timeleft = 0; 1108 int i, nxtpwr, curpwr, pwrndx, unused; 1109 size_t size; 1110 pm_component_t *cp; 1111 dev_info_t *pdip = ddi_get_parent(dip); 1112 int circ; 1113 static int cur_threshold(dev_info_t *, int); 1114 static int pm_next_lower_power(pm_component_t *, int); 1115 1116 /* 1117 * skip attaching device 1118 */ 1119 if (DEVI_IS_ATTACHING(dip)) { 1120 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) is attaching, timeleft(%lx)\n", 1121 pmf, PM_DEVICE(dip), pm_min_scan)) 1122 return (pm_min_scan); 1123 } 1124 1125 PM_LOCK_DIP(dip); 1126 scanp = PM_GET_PM_SCAN(dip); 1127 ASSERT(scanp && PM_GET_PM_INFO(dip)); 1128 1129 PMD(PMD_SCAN, ("%s: [BEGIN %s@%s(%s#%d)]\n", pmf, PM_DEVICE(dip))) 1130 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d): kuc is %d\n", pmf, PM_DEVICE(dip), 1131 PM_KUC(dip))) 1132 1133 /* no scan under the following conditions */ 1134 if (pm_scans_disabled || !autopm_enabled || 1135 (scanp->ps_scan_flags & PM_SCAN_STOP) || 1136 (PM_KUC(dip) != 0) || 1137 PM_ISDIRECT(dip) || pm_noinvol(dip)) { 1138 PM_UNLOCK_DIP(dip); 1139 PMD(PMD_SCAN, ("%s: [END, %s@%s(%s#%d)] no scan, " 1140 "scan_disabled(%d), apm_enabled(%d), kuc(%d), " 1141 "%s directpm, %s pm_noinvol\n", pmf, PM_DEVICE(dip), 1142 pm_scans_disabled, autopm_enabled, PM_KUC(dip), 1143 PM_ISDIRECT(dip) ? "is" : "is not", 1144 pm_noinvol(dip) ? "is" : "is not")) 1145 return (LONG_MAX); 1146 } 1147 PM_UNLOCK_DIP(dip); 1148 1149 if (!ndi_devi_tryenter(pdip, &circ)) { 1150 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) can't hold pdip", 1151 pmf, PM_DEVICE(pdip))) 1152 return ((time_t)1); 1153 } 1154 now = gethrestime_sec(); 1155 size = PM_NUMCMPTS(dip) * sizeof (time_t); 1156 timestamp = kmem_alloc(size, KM_SLEEP); 1157 pm_get_timestamps(dip, timestamp); 1158 1159 /* 1160 * Since we removed support for backwards compatible devices, 1161 * (see big comment at top of file) 1162 * it is no longer required to deal with component 0 last. 1163 */ 1164 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 1165 /* 1166 * If already off (an optimization, perhaps) 1167 */ 1168 cp = PM_CP(dip, i); 1169 pwrndx = cp->pmc_cur_pwr; 1170 curpwr = (pwrndx == PM_LEVEL_UNKNOWN) ? 1171 PM_LEVEL_UNKNOWN : 1172 cp->pmc_comp.pmc_lvals[pwrndx]; 1173 1174 if (pwrndx == 0) { 1175 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d off or " 1176 "lowest\n", pmf, PM_DEVICE(dip), i)) 1177 /* skip device if off or at its lowest */ 1178 continue; 1179 } 1180 1181 thresh = cur_threshold(dip, i); /* comp i threshold */ 1182 if ((timestamp[i] == 0) || (cp->pmc_busycount > 0)) { 1183 /* were busy or newly became busy by another thread */ 1184 if (timeleft == 0) 1185 timeleft = max(thresh, pm_min_scan); 1186 else 1187 timeleft = min( 1188 timeleft, max(thresh, pm_min_scan)); 1189 continue; 1190 } 1191 1192 idletime = now - timestamp[i]; /* idle time */ 1193 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d idle time %lx\n", 1194 pmf, PM_DEVICE(dip), i, idletime)) 1195 if (idletime >= thresh || PM_IS_PID(dip)) { 1196 nxtpwr = pm_next_lower_power(cp, pwrndx); 1197 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d, %d->%d\n", 1198 pmf, PM_DEVICE(dip), i, curpwr, nxtpwr)) 1199 if (pm_set_power(dip, i, nxtpwr, PM_LEVEL_DOWNONLY, 1200 PM_CANBLOCK_FAIL, 1, &unused) != DDI_SUCCESS && 1201 PM_CURPOWER(dip, i) != nxtpwr) { 1202 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d, " 1203 "%d->%d Failed\n", pmf, PM_DEVICE(dip), 1204 i, curpwr, nxtpwr)) 1205 timeleft = pm_min_scan; 1206 continue; 1207 } else { 1208 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d, " 1209 "%d->%d, GOOD curpwr %d\n", pmf, 1210 PM_DEVICE(dip), i, curpwr, nxtpwr, 1211 cur_power(cp))) 1212 1213 if (nxtpwr == 0) /* component went off */ 1214 continue; 1215 1216 /* 1217 * scan to next lower level 1218 */ 1219 if (timeleft == 0) 1220 timeleft = max( 1221 1, cur_threshold(dip, i)); 1222 else 1223 timeleft = min(timeleft, 1224 max(1, cur_threshold(dip, i))); 1225 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d, " 1226 "timeleft(%lx)\n", pmf, PM_DEVICE(dip), 1227 i, timeleft)) 1228 } 1229 } else { /* comp not idle long enough */ 1230 if (timeleft == 0) 1231 timeleft = thresh - idletime; 1232 else 1233 timeleft = min(timeleft, (thresh - idletime)); 1234 PMD(PMD_SCAN, ("%s: %s@%s(%s#%d) comp %d, timeleft=" 1235 "%lx\n", pmf, PM_DEVICE(dip), i, timeleft)) 1236 } 1237 } 1238 ndi_devi_exit(pdip, circ); 1239 kmem_free(timestamp, size); 1240 PMD(PMD_SCAN, ("%s: [END %s@%s(%s#%d)] timeleft(%lx)\n", pmf, 1241 PM_DEVICE(dip), timeleft)) 1242 1243 /* 1244 * if components are already at lowest level, timeleft is left 0 1245 */ 1246 return ((timeleft == 0) ? LONG_MAX : timeleft); 1247 } 1248 1249 /* 1250 * pm_scan_stop - cancel scheduled pm_rescan, 1251 * wait for termination of dispatched pm_scan thread 1252 * and active pm_scan_dev thread. 1253 */ 1254 void 1255 pm_scan_stop(dev_info_t *dip) 1256 { 1257 PMD_FUNC(pmf, "scan_stop") 1258 pm_scan_t *scanp; 1259 timeout_id_t scanid; 1260 1261 PMD(PMD_SCAN, ("%s: [BEGIN %s@%s(%s#%d)]\n", pmf, PM_DEVICE(dip))) 1262 PM_LOCK_DIP(dip); 1263 scanp = PM_GET_PM_SCAN(dip); 1264 if (!scanp) { 1265 PMD(PMD_SCAN, ("%s: [END %s@%s(%s#%d)] scan not initialized\n", 1266 pmf, PM_DEVICE(dip))) 1267 PM_UNLOCK_DIP(dip); 1268 return; 1269 } 1270 scanp->ps_scan_flags |= PM_SCAN_STOP; 1271 1272 /* cancel scheduled scan taskq */ 1273 while (scanp->ps_scan_id) { 1274 scanid = scanp->ps_scan_id; 1275 scanp->ps_scan_id = 0; 1276 PM_UNLOCK_DIP(dip); 1277 (void) untimeout(scanid); 1278 PM_LOCK_DIP(dip); 1279 } 1280 1281 while (scanp->ps_scan_flags & (PM_SCANNING | PM_SCAN_DISPATCHED)) { 1282 PM_UNLOCK_DIP(dip); 1283 delay(1); 1284 PM_LOCK_DIP(dip); 1285 } 1286 PM_UNLOCK_DIP(dip); 1287 PMD(PMD_SCAN, ("%s: [END %s@%s(%s#%d)]\n", pmf, PM_DEVICE(dip))) 1288 } 1289 1290 int 1291 pm_scan_stop_walk(dev_info_t *dip, void *arg) 1292 { 1293 _NOTE(ARGUNUSED(arg)) 1294 1295 if (!PM_GET_PM_SCAN(dip)) 1296 return (DDI_WALK_CONTINUE); 1297 ASSERT(!PM_ISBC(dip)); 1298 pm_scan_stop(dip); 1299 return (DDI_WALK_CONTINUE); 1300 } 1301 1302 /* 1303 * Converts a power level value to its index 1304 */ 1305 static int 1306 power_val_to_index(pm_component_t *cp, int val) 1307 { 1308 int limit, i, *ip; 1309 1310 ASSERT(val != PM_LEVEL_UPONLY && val != PM_LEVEL_DOWNONLY && 1311 val != PM_LEVEL_EXACT); 1312 /* convert power value into index (i) */ 1313 limit = cp->pmc_comp.pmc_numlevels; 1314 ip = cp->pmc_comp.pmc_lvals; 1315 for (i = 0; i < limit; i++) 1316 if (val == *ip++) 1317 return (i); 1318 return (-1); 1319 } 1320 1321 /* 1322 * Converts a numeric power level to a printable string 1323 */ 1324 static char * 1325 power_val_to_string(pm_component_t *cp, int val) 1326 { 1327 int index; 1328 1329 if (val == PM_LEVEL_UPONLY) 1330 return ("<UPONLY>"); 1331 1332 if (val == PM_LEVEL_UNKNOWN || 1333 (index = power_val_to_index(cp, val)) == -1) 1334 return ("<LEVEL_UNKNOWN>"); 1335 1336 return (cp->pmc_comp.pmc_lnames[index]); 1337 } 1338 1339 /* 1340 * Return true if this node has been claimed by a ppm. 1341 */ 1342 static int 1343 pm_ppm_claimed(dev_info_t *dip) 1344 { 1345 return (PPM(dip) != NULL); 1346 } 1347 1348 /* 1349 * A node which was voluntarily power managed has just used up its "free cycle" 1350 * and need is volpmd field cleared, and the same done to all its descendents 1351 */ 1352 static void 1353 pm_clear_volpm_dip(dev_info_t *dip) 1354 { 1355 PMD_FUNC(pmf, "clear_volpm_dip") 1356 1357 if (dip == NULL) 1358 return; 1359 PMD(PMD_NOINVOL, ("%s: clear volpm from %s@%s(%s#%d)\n", pmf, 1360 PM_DEVICE(dip))) 1361 DEVI(dip)->devi_pm_volpmd = 0; 1362 for (dip = ddi_get_child(dip); dip; dip = ddi_get_next_sibling(dip)) { 1363 pm_clear_volpm_dip(dip); 1364 } 1365 } 1366 1367 /* 1368 * A node which was voluntarily power managed has used up the "free cycles" 1369 * for the subtree that it is the root of. Scan through the list of detached 1370 * nodes and adjust the counts of any that are descendents of the node. 1371 */ 1372 static void 1373 pm_clear_volpm_list(dev_info_t *dip) 1374 { 1375 PMD_FUNC(pmf, "clear_volpm_list") 1376 char *pathbuf; 1377 size_t len; 1378 pm_noinvol_t *ip; 1379 1380 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 1381 (void) ddi_pathname(dip, pathbuf); 1382 len = strlen(pathbuf); 1383 PMD(PMD_NOINVOL, ("%s: clear volpm list %s\n", pmf, pathbuf)) 1384 rw_enter(&pm_noinvol_rwlock, RW_WRITER); 1385 for (ip = pm_noinvol_head; ip; ip = ip->ni_next) { 1386 PMD(PMD_NOINVOL, ("%s: clear volpm: ni_path %s\n", pmf, 1387 ip->ni_path)) 1388 if (strncmp(pathbuf, ip->ni_path, len) == 0 && 1389 ip->ni_path[len] == '/') { 1390 PMD(PMD_NOINVOL, ("%s: clear volpm: %s\n", pmf, 1391 ip->ni_path)) 1392 ip->ni_volpmd = 0; 1393 ip->ni_wasvolpmd = 0; 1394 } 1395 } 1396 kmem_free(pathbuf, MAXPATHLEN); 1397 rw_exit(&pm_noinvol_rwlock); 1398 } 1399 1400 /* 1401 * Powers a device, suspending or resuming the driver if it is a backward 1402 * compatible device, calling into ppm to change power level. 1403 * Called with the component's power lock held. 1404 */ 1405 static int 1406 power_dev(dev_info_t *dip, int comp, int level, int old_level, 1407 pm_canblock_t canblock, pm_ppm_devlist_t **devlist) 1408 { 1409 PMD_FUNC(pmf, "power_dev") 1410 power_req_t power_req; 1411 int power_op_ret; /* DDI_SUCCESS or DDI_FAILURE */ 1412 int resume_needed = 0; 1413 int suspended = 0; 1414 int result; 1415 struct pm_component *cp = PM_CP(dip, comp); 1416 int bc = PM_ISBC(dip); 1417 int pm_all_components_off(dev_info_t *); 1418 int clearvolpmd = 0; 1419 char pathbuf[MAXNAMELEN]; 1420 #ifdef DEBUG 1421 char *ppmname, *ppmaddr; 1422 #endif 1423 /* 1424 * If this is comp 0 of a backwards compat device and we are 1425 * going to take the power away, we need to detach it with 1426 * DDI_PM_SUSPEND command. 1427 */ 1428 if (bc && comp == 0 && POWERING_OFF(old_level, level)) { 1429 if (devi_detach(dip, DDI_PM_SUSPEND) != DDI_SUCCESS) { 1430 /* We could not suspend before turning cmpt zero off */ 1431 PMD(PMD_ERROR, ("%s: could not suspend %s@%s(%s#%d)\n", 1432 pmf, PM_DEVICE(dip))) 1433 return (DDI_FAILURE); 1434 } else { 1435 DEVI(dip)->devi_pm_flags |= PMC_SUSPENDED; 1436 suspended++; 1437 } 1438 } 1439 power_req.request_type = PMR_PPM_SET_POWER; 1440 power_req.req.ppm_set_power_req.who = dip; 1441 power_req.req.ppm_set_power_req.cmpt = comp; 1442 power_req.req.ppm_set_power_req.old_level = old_level; 1443 power_req.req.ppm_set_power_req.new_level = level; 1444 power_req.req.ppm_set_power_req.canblock = canblock; 1445 power_req.req.ppm_set_power_req.cookie = NULL; 1446 #ifdef DEBUG 1447 if (pm_ppm_claimed(dip)) { 1448 ppmname = PM_NAME(PPM(dip)); 1449 ppmaddr = PM_ADDR(PPM(dip)); 1450 1451 } else { 1452 ppmname = "noppm"; 1453 ppmaddr = "0"; 1454 } 1455 PMD(PMD_PPM, ("%s: %s@%s(%s#%d):%s[%d] %s (%d) -> %s (%d) via %s@%s\n", 1456 pmf, PM_DEVICE(dip), cp->pmc_comp.pmc_name, comp, 1457 power_val_to_string(cp, old_level), old_level, 1458 power_val_to_string(cp, level), level, ppmname, ppmaddr)) 1459 #endif 1460 /* 1461 * If non-bc noinvolpm device is turning first comp on, or noinvolpm 1462 * bc device comp 0 is powering on, then we count it as a power cycle 1463 * against its voluntary count. 1464 */ 1465 if (DEVI(dip)->devi_pm_volpmd && 1466 (!bc && pm_all_components_off(dip) && level != 0) || 1467 (bc && comp == 0 && POWERING_ON(old_level, level))) 1468 clearvolpmd = 1; 1469 if ((power_op_ret = pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, 1470 &power_req, &result)) == DDI_SUCCESS) { 1471 /* 1472 * Now do involuntary pm accounting; If we've just cycled power 1473 * on a voluntarily pm'd node, and by inference on its entire 1474 * subtree, we need to set the subtree (including those nodes 1475 * already detached) volpmd counts to 0, and subtract out the 1476 * value of the current node's volpmd count from the ancestors 1477 */ 1478 if (clearvolpmd) { 1479 int volpmd = DEVI(dip)->devi_pm_volpmd; 1480 pm_clear_volpm_dip(dip); 1481 pm_clear_volpm_list(dip); 1482 if (volpmd) { 1483 (void) ddi_pathname(dip, pathbuf); 1484 (void) pm_noinvol_update(PM_BP_NOINVOL_POWER, 1485 volpmd, 0, pathbuf, dip); 1486 } 1487 } 1488 } else { 1489 PMD(PMD_FAIL, ("%s: can't set comp %d (%s) of %s@%s(%s#%d) " 1490 "to level %d (%s)\n", pmf, comp, cp->pmc_comp.pmc_name, 1491 PM_DEVICE(dip), level, power_val_to_string(cp, level))) 1492 } 1493 /* 1494 * If some other devices were also powered up (e.g. other cpus in 1495 * the same domain) return a pointer to that list 1496 */ 1497 if (devlist) { 1498 *devlist = (pm_ppm_devlist_t *) 1499 power_req.req.ppm_set_power_req.cookie; 1500 } 1501 /* 1502 * We will have to resume the device if the device is backwards compat 1503 * device and either of the following is true: 1504 * -This is comp 0 and we have successfully powered it up 1505 * -This is comp 0 and we have failed to power it down. Resume is 1506 * needed because we have suspended it above 1507 */ 1508 1509 if (bc && comp == 0) { 1510 ASSERT(PM_ISDIRECT(dip) || DEVI_IS_DETACHING(dip)); 1511 if (power_op_ret == DDI_SUCCESS) { 1512 if (POWERING_ON(old_level, level)) { 1513 /* 1514 * It must be either suspended or resumed 1515 * via pm_power_has_changed path 1516 */ 1517 ASSERT((DEVI(dip)->devi_pm_flags & 1518 PMC_SUSPENDED) || 1519 (PM_CP(dip, comp)->pmc_flags & 1520 PM_PHC_WHILE_SET_POWER)); 1521 1522 resume_needed = suspended; 1523 } 1524 } else { 1525 if (POWERING_OFF(old_level, level)) { 1526 /* 1527 * It must be either suspended or resumed 1528 * via pm_power_has_changed path 1529 */ 1530 ASSERT((DEVI(dip)->devi_pm_flags & 1531 PMC_SUSPENDED) || 1532 (PM_CP(dip, comp)->pmc_flags & 1533 PM_PHC_WHILE_SET_POWER)); 1534 1535 resume_needed = suspended; 1536 } 1537 } 1538 } 1539 if (resume_needed) { 1540 ASSERT(DEVI(dip)->devi_pm_flags & PMC_SUSPENDED); 1541 /* ppm is not interested in DDI_PM_RESUME */ 1542 if ((power_op_ret = devi_attach(dip, DDI_PM_RESUME)) == 1543 DDI_SUCCESS) { 1544 DEVI(dip)->devi_pm_flags &= ~PMC_SUSPENDED; 1545 } else 1546 cmn_err(CE_WARN, "!pm: Can't resume %s@%s(%s#%d)", 1547 PM_DEVICE(dip)); 1548 } 1549 return (power_op_ret); 1550 } 1551 1552 /* 1553 * Return true if we are the owner or a borrower of the devi lock. See 1554 * pm_lock_power_single() about borrowing the lock. 1555 */ 1556 static int 1557 pm_devi_lock_held(dev_info_t *dip) 1558 { 1559 lock_loan_t *cur; 1560 1561 if (DEVI_BUSY_OWNED(dip)) 1562 return (1); 1563 1564 /* return false if no locks borrowed */ 1565 if (lock_loan_head.pmlk_next == NULL) 1566 return (0); 1567 1568 mutex_enter(&pm_loan_lock); 1569 /* see if our thread is registered as a lock borrower. */ 1570 for (cur = lock_loan_head.pmlk_next; cur; cur = cur->pmlk_next) 1571 if (cur->pmlk_borrower == curthread) 1572 break; 1573 mutex_exit(&pm_loan_lock); 1574 1575 return (cur != NULL && cur->pmlk_lender == DEVI(dip)->devi_busy_thread); 1576 } 1577 1578 /* 1579 * pm_set_power: adjusts power level of device. Assumes device is power 1580 * manageable & component exists. 1581 * 1582 * Cases which require us to bring up devices we keep up ("wekeepups") for 1583 * backwards compatible devices: 1584 * component 0 is off and we're bringing it up from 0 1585 * bring up wekeepup first 1586 * and recursively when component 0 is off and we bring some other 1587 * component up from 0 1588 * For devices which are not backward compatible, our dependency notion is much 1589 * simpler. Unless all components are off, then wekeeps must be on. 1590 * We don't treat component 0 differently. 1591 * Canblock tells how to deal with a direct pm'd device. 1592 * Scan arg tells us if we were called from scan, in which case we don't need 1593 * to go back to the root node and walk down to change power. 1594 */ 1595 int 1596 pm_set_power(dev_info_t *dip, int comp, int level, int direction, 1597 pm_canblock_t canblock, int scan, int *retp) 1598 { 1599 PMD_FUNC(pmf, "set_power") 1600 char *pathbuf; 1601 pm_bp_child_pwrchg_t bpc; 1602 pm_sp_misc_t pspm; 1603 int ret = DDI_SUCCESS; 1604 int unused = DDI_SUCCESS; 1605 dev_info_t *pdip = ddi_get_parent(dip); 1606 1607 #ifdef DEBUG 1608 int diverted = 0; 1609 1610 /* 1611 * This prevents operations on the console from calling prom_printf and 1612 * either deadlocking or bringing up the console because of debug 1613 * output 1614 */ 1615 if (dip == cfb_dip) { 1616 diverted++; 1617 mutex_enter(&pm_debug_lock); 1618 pm_divertdebug++; 1619 mutex_exit(&pm_debug_lock); 1620 } 1621 #endif 1622 ASSERT(direction == PM_LEVEL_UPONLY || direction == PM_LEVEL_DOWNONLY || 1623 direction == PM_LEVEL_EXACT); 1624 PMD(PMD_SET, ("%s: %s@%s(%s#%d), comp=%d, dir=%s, new=%d\n", 1625 pmf, PM_DEVICE(dip), comp, pm_decode_direction(direction), level)) 1626 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 1627 (void) ddi_pathname(dip, pathbuf); 1628 bpc.bpc_dip = dip; 1629 bpc.bpc_path = pathbuf; 1630 bpc.bpc_comp = comp; 1631 bpc.bpc_olevel = PM_CURPOWER(dip, comp); 1632 bpc.bpc_nlevel = level; 1633 pspm.pspm_direction = direction; 1634 pspm.pspm_errnop = retp; 1635 pspm.pspm_canblock = canblock; 1636 pspm.pspm_scan = scan; 1637 bpc.bpc_private = &pspm; 1638 1639 /* 1640 * If a config operation is being done (we've locked the parent) or 1641 * we already hold the power lock (we've locked the node) 1642 * then we can operate directly on the node because we have already 1643 * brought up all the ancestors, otherwise, we have to go back to the 1644 * top of the tree. 1645 */ 1646 if (pm_devi_lock_held(pdip) || pm_devi_lock_held(dip)) 1647 ret = pm_busop_set_power(dip, NULL, BUS_POWER_CHILD_PWRCHG, 1648 (void *)&bpc, (void *)&unused); 1649 else 1650 ret = pm_busop_bus_power(ddi_root_node(), NULL, 1651 BUS_POWER_CHILD_PWRCHG, (void *)&bpc, (void *)&unused); 1652 #ifdef DEBUG 1653 if (ret != DDI_SUCCESS || *retp != DDI_SUCCESS) { 1654 PMD(PMD_ERROR, ("%s: %s@%s(%s#%d) can't change power, ret=%d, " 1655 "errno=%d\n", pmf, PM_DEVICE(dip), ret, *retp)) 1656 } 1657 if (diverted) { 1658 mutex_enter(&pm_debug_lock); 1659 pm_divertdebug--; 1660 mutex_exit(&pm_debug_lock); 1661 } 1662 #endif 1663 kmem_free(pathbuf, MAXPATHLEN); 1664 return (ret); 1665 } 1666 1667 1668 static dev_info_t * 1669 find_dip(dev_info_t *dip, char *dev_name, int holddip) 1670 { 1671 PMD_FUNC(pmf, "find_dip") 1672 dev_info_t *cdip; 1673 char *child_dev, *addr; 1674 char *device; /* writeable copy of path */ 1675 int dev_len = strlen(dev_name)+1; 1676 int circ; 1677 1678 device = kmem_zalloc(dev_len, KM_SLEEP); 1679 (void) strcpy(device, dev_name); 1680 addr = strchr(device, '@'); 1681 child_dev = strchr(device, '/'); 1682 if ((addr != NULL) && (child_dev == NULL || addr < child_dev)) { 1683 /* 1684 * We have device = "name@addr..." form 1685 */ 1686 *addr++ = '\0'; /* for strcmp (and skip '@') */ 1687 if (child_dev != NULL) 1688 *child_dev++ = '\0'; /* for strcmp (and skip '/') */ 1689 } else { 1690 /* 1691 * We have device = "name/..." or "name" 1692 */ 1693 addr = ""; 1694 if (child_dev != NULL) 1695 *child_dev++ = '\0'; /* for strcmp (and skip '/') */ 1696 } 1697 for (; dip != NULL; dip = ddi_get_next_sibling(dip)) { 1698 if (strcmp(ddi_node_name(dip), device) == 0) { 1699 /* If the driver isn't loaded, we prune the search */ 1700 if (i_ddi_node_state(dip) < DS_READY) { 1701 continue; 1702 } 1703 if (strcmp(ddi_get_name_addr(dip), addr) == 0) { 1704 PMD(PMD_NAMETODIP, ("%s: matched %s@%s" 1705 "(%s#%d)\n", pmf, PM_DEVICE(dip))) 1706 if (child_dev != NULL) { 1707 PMD(PMD_NAMETODIP, ("%s: %s@%s(%s#%d): " 1708 "held, call find_dip %s\n", pmf, 1709 PM_DEVICE(dip), child_dev)) 1710 ndi_devi_enter(dip, &circ); 1711 cdip = dip; 1712 dip = find_dip(ddi_get_child(dip), 1713 child_dev, holddip); 1714 ndi_devi_exit(cdip, circ); 1715 PMD(PMD_NAMETODIP, ("%s: %s@%s(%s#%d): " 1716 "release, find_dip rets %s\n", pmf, 1717 PM_DEVICE(cdip), child_dev)) 1718 } else { 1719 if (holddip) { 1720 e_ddi_hold_devi(dip); 1721 PMD(PMD_DHR | PMD_NAMETODIP, 1722 ("%s: held %s@%s(%s#%d), " 1723 "refcnt=%d\n", pmf, 1724 PM_DEVICE(dip), 1725 e_ddi_devi_holdcnt(dip))) 1726 } 1727 } 1728 kmem_free(device, dev_len); 1729 return (dip); 1730 } 1731 } 1732 } 1733 kmem_free(device, dev_len); 1734 return (dip); 1735 } 1736 1737 /* 1738 * If holddip is set, then if a dip is found we return with the node held 1739 */ 1740 dev_info_t * 1741 pm_name_to_dip(char *pathname, int holddip) 1742 { 1743 PMD_FUNC(pmf, "name_to_dip") 1744 dev_info_t *dip = NULL; 1745 char dev_name[MAXNAMELEN]; 1746 dev_info_t *first_child; 1747 int circular; 1748 1749 if (!pathname) 1750 return (NULL); 1751 1752 (void) strncpy(dev_name, pathname, MAXNAMELEN); 1753 1754 PMD(PMD_NAMETODIP, ("%s: devname: %s\n", pmf, dev_name)) 1755 1756 /* 1757 * First we attempt to match the node in the tree. If we succeed 1758 * we hold the driver and look up the dip again. 1759 * No need to hold the root as that node is always held. 1760 */ 1761 if (dev_name[0] == '/') { 1762 ndi_devi_enter(ddi_root_node(), &circular); 1763 first_child = ddi_get_child(ddi_root_node()); 1764 dip = find_dip(first_child, dev_name + 1, holddip); 1765 ndi_devi_exit(ddi_root_node(), circular); 1766 1767 } else { 1768 PMD(PMD_NAMETODIP, ("%s: physpath with unrooted " 1769 "search\n", pmf)) 1770 return (NULL); 1771 } 1772 1773 ASSERT(!dip || 1774 (ddi_name_to_major(ddi_binding_name(dip)) != (major_t)-1)); 1775 1776 return (dip); 1777 } 1778 1779 /* 1780 * Search for a dependency and mark it unsatisfied 1781 */ 1782 static void 1783 pm_unsatisfy(char *keeper, char *kept) 1784 { 1785 PMD_FUNC(pmf, "unsatisfy") 1786 pm_pdr_t *dp; 1787 1788 PMD(PMD_KEEPS, ("%s: keeper=%s, kept=%s\n", pmf, keeper, kept)) 1789 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 1790 if (!dp->pdr_isprop) { 1791 if (strcmp(dp->pdr_keeper, keeper) == 0 && 1792 (dp->pdr_kept_count > 0) && 1793 strcmp(dp->pdr_kept_paths[0], kept) == 0) { 1794 if (dp->pdr_satisfied) { 1795 dp->pdr_satisfied = 0; 1796 pm_unresolved_deps++; 1797 PMD(PMD_KEEPS, ("%s: clear satisfied, " 1798 "pm_unresolved_deps now %d\n", pmf, 1799 pm_unresolved_deps)) 1800 } 1801 } 1802 } 1803 } 1804 } 1805 1806 /* 1807 * Device dip is being un power managed, it keeps up count other devices. 1808 * We need to release any hold we have on the kept devices, and also 1809 * mark the dependency no longer satisfied. 1810 */ 1811 static void 1812 pm_unkeeps(int count, char *keeper, char **keptpaths, int pwr) 1813 { 1814 PMD_FUNC(pmf, "unkeeps") 1815 int i, j; 1816 dev_info_t *kept; 1817 dev_info_t *dip; 1818 struct pm_component *cp; 1819 int keeper_on = 0, circ; 1820 1821 PMD(PMD_KEEPS, ("%s: count=%d, keeper=%s, keptpaths=%p\n", pmf, count, 1822 keeper, (void *)keptpaths)) 1823 /* 1824 * Try to grab keeper. Keeper may have gone away by now, 1825 * in this case, used the passed in value pwr 1826 */ 1827 dip = pm_name_to_dip(keeper, 1); 1828 for (i = 0; i < count; i++) { 1829 /* Release power hold */ 1830 kept = pm_name_to_dip(keptpaths[i], 1); 1831 if (kept) { 1832 PMD(PMD_KEEPS, ("%s: %s@%s(%s#%d)[%d]\n", pmf, 1833 PM_DEVICE(kept), i)) 1834 /* 1835 * We need to check if we skipped a bringup here 1836 * because we could have failed the bringup 1837 * (ie DIRECT PM device) and have 1838 * not increment the count. 1839 */ 1840 if ((dip != NULL) && (PM_GET_PM_INFO(dip) != NULL)) { 1841 keeper_on = 0; 1842 PM_LOCK_POWER(dip, &circ); 1843 for (j = 0; j < PM_NUMCMPTS(dip); j++) { 1844 cp = &DEVI(dip)->devi_pm_components[j]; 1845 if (cur_power(cp)) { 1846 keeper_on++; 1847 break; 1848 } 1849 } 1850 if (keeper_on && (PM_SKBU(kept) == 0)) { 1851 pm_rele_power(kept); 1852 DEVI(kept)->devi_pm_flags 1853 &= ~PMC_SKIP_BRINGUP; 1854 } 1855 PM_UNLOCK_POWER(dip, circ); 1856 } else if (pwr) { 1857 if (PM_SKBU(kept) == 0) { 1858 pm_rele_power(kept); 1859 DEVI(kept)->devi_pm_flags 1860 &= ~PMC_SKIP_BRINGUP; 1861 } 1862 } 1863 ddi_release_devi(kept); 1864 } 1865 /* 1866 * mark this dependency not satisfied 1867 */ 1868 pm_unsatisfy(keeper, keptpaths[i]); 1869 } 1870 if (dip) 1871 ddi_release_devi(dip); 1872 } 1873 1874 /* 1875 * Device kept is being un power managed, it is kept up by keeper. 1876 * We need to mark the dependency no longer satisfied. 1877 */ 1878 static void 1879 pm_unkepts(char *kept, char *keeper) 1880 { 1881 PMD_FUNC(pmf, "unkepts") 1882 PMD(PMD_KEEPS, ("%s: kept=%s, keeper=%s\n", pmf, kept, keeper)) 1883 ASSERT(keeper != NULL); 1884 /* 1885 * mark this dependency not satisfied 1886 */ 1887 pm_unsatisfy(keeper, kept); 1888 } 1889 1890 /* 1891 * Removes dependency information and hold on the kepts, if the path is a 1892 * path of a keeper. 1893 */ 1894 static void 1895 pm_free_keeper(char *path, int pwr) 1896 { 1897 pm_pdr_t *dp; 1898 int i; 1899 size_t length; 1900 1901 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 1902 if (strcmp(dp->pdr_keeper, path) != 0) 1903 continue; 1904 /* 1905 * Remove all our kept holds and the dependency records, 1906 * then free up the kept lists. 1907 */ 1908 pm_unkeeps(dp->pdr_kept_count, path, dp->pdr_kept_paths, pwr); 1909 if (dp->pdr_kept_count) { 1910 for (i = 0; i < dp->pdr_kept_count; i++) { 1911 length = strlen(dp->pdr_kept_paths[i]); 1912 kmem_free(dp->pdr_kept_paths[i], length + 1); 1913 } 1914 kmem_free(dp->pdr_kept_paths, 1915 dp->pdr_kept_count * sizeof (char **)); 1916 dp->pdr_kept_paths = NULL; 1917 dp->pdr_kept_count = 0; 1918 } 1919 } 1920 } 1921 1922 /* 1923 * Removes the device represented by path from the list of kepts, if the 1924 * path is a path of a kept 1925 */ 1926 static void 1927 pm_free_kept(char *path) 1928 { 1929 pm_pdr_t *dp; 1930 int i; 1931 int j, count; 1932 size_t length; 1933 char **paths; 1934 1935 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 1936 if (dp->pdr_kept_count == 0) 1937 continue; 1938 count = dp->pdr_kept_count; 1939 /* Remove this device from the kept path lists */ 1940 for (i = 0; i < count; i++) { 1941 if (strcmp(dp->pdr_kept_paths[i], path) == 0) { 1942 pm_unkepts(path, dp->pdr_keeper); 1943 length = strlen(dp->pdr_kept_paths[i]) + 1; 1944 kmem_free(dp->pdr_kept_paths[i], length); 1945 dp->pdr_kept_paths[i] = NULL; 1946 dp->pdr_kept_count--; 1947 } 1948 } 1949 /* Compact the kept paths array */ 1950 if (dp->pdr_kept_count) { 1951 length = dp->pdr_kept_count * sizeof (char **); 1952 paths = kmem_zalloc(length, KM_SLEEP); 1953 j = 0; 1954 for (i = 0; i < count; i++) { 1955 if (dp->pdr_kept_paths[i] != NULL) { 1956 paths[j] = dp->pdr_kept_paths[i]; 1957 j++; 1958 } 1959 } 1960 ASSERT(j == dp->pdr_kept_count); 1961 } 1962 /* Now free the old array and point to the new one */ 1963 kmem_free(dp->pdr_kept_paths, count * sizeof (char **)); 1964 if (dp->pdr_kept_count) 1965 dp->pdr_kept_paths = paths; 1966 else 1967 dp->pdr_kept_paths = NULL; 1968 } 1969 } 1970 1971 /* 1972 * Free the dependency information for a device. 1973 */ 1974 void 1975 pm_free_keeps(char *path, int pwr) 1976 { 1977 PMD_FUNC(pmf, "free_keeps") 1978 1979 #ifdef DEBUG 1980 int doprdeps = 0; 1981 void prdeps(char *); 1982 1983 PMD(PMD_KEEPS, ("%s: %s\n", pmf, path)) 1984 if (pm_debug & PMD_KEEPS) { 1985 doprdeps = 1; 1986 prdeps("pm_free_keeps before"); 1987 } 1988 #endif 1989 /* 1990 * First assume we are a keeper and remove all our kepts. 1991 */ 1992 pm_free_keeper(path, pwr); 1993 /* 1994 * Now assume we a kept device, and remove all our records. 1995 */ 1996 pm_free_kept(path); 1997 #ifdef DEBUG 1998 if (doprdeps) { 1999 prdeps("pm_free_keeps after"); 2000 } 2001 #endif 2002 } 2003 2004 static int 2005 pm_is_kept(char *path) 2006 { 2007 pm_pdr_t *dp; 2008 int i; 2009 2010 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 2011 if (dp->pdr_kept_count == 0) 2012 continue; 2013 for (i = 0; i < dp->pdr_kept_count; i++) { 2014 if (strcmp(dp->pdr_kept_paths[i], path) == 0) 2015 return (1); 2016 } 2017 } 2018 return (0); 2019 } 2020 2021 static void 2022 e_pm_hold_rele_power(dev_info_t *dip, int cnt) 2023 { 2024 PMD_FUNC(pmf, "hold_rele_power") 2025 int circ; 2026 2027 if ((dip == NULL) || 2028 (PM_GET_PM_INFO(dip) == NULL) || PM_ISBC(dip)) 2029 return; 2030 PM_LOCK_POWER(dip, &circ); 2031 ASSERT(cnt >= 0 && PM_KUC(dip) >= 0 || cnt < 0 && PM_KUC(dip) > 0); 2032 PMD(PMD_KIDSUP, ("%s: kidsupcnt for %s@%s(%s#%d) %d->%d\n", pmf, 2033 PM_DEVICE(dip), PM_KUC(dip), (PM_KUC(dip) + cnt))) 2034 PM_KUC(dip) += cnt; 2035 ASSERT(PM_KUC(dip) >= 0); 2036 PM_UNLOCK_POWER(dip, circ); 2037 if (cnt < 0 && PM_KUC(dip) == 0) 2038 pm_rescan(dip); 2039 } 2040 2041 #define MAX_PPM_HANDLERS 4 2042 2043 kmutex_t ppm_lock; /* in case we ever do multi-threaded startup */ 2044 2045 struct ppm_callbacks { 2046 int (*ppmc_func)(dev_info_t *); 2047 dev_info_t *ppmc_dip; 2048 } ppm_callbacks[MAX_PPM_HANDLERS + 1]; 2049 2050 2051 /* 2052 * This routine calls into all the registered ppms to notify them 2053 * that either all components of power-managed devices are at their 2054 * lowest levels or no longer all are at their lowest levels. 2055 */ 2056 static void 2057 pm_ppm_notify_all_lowest(dev_info_t *dip, int mode) 2058 { 2059 struct ppm_callbacks *ppmcp; 2060 power_req_t power_req; 2061 int result = 0; 2062 2063 power_req.request_type = PMR_PPM_ALL_LOWEST; 2064 power_req.req.ppm_all_lowest_req.mode = mode; 2065 mutex_enter(&ppm_lock); 2066 for (ppmcp = ppm_callbacks; ppmcp->ppmc_func; ppmcp++) 2067 (void) pm_ctlops((dev_info_t *)ppmcp->ppmc_dip, dip, 2068 DDI_CTLOPS_POWER, &power_req, &result); 2069 mutex_exit(&ppm_lock); 2070 } 2071 2072 static void 2073 pm_set_pm_info(dev_info_t *dip, void *value) 2074 { 2075 DEVI(dip)->devi_pm_info = value; 2076 } 2077 2078 pm_rsvp_t *pm_blocked_list; 2079 2080 /* 2081 * Look up an entry in the blocked list by dip and component 2082 */ 2083 static pm_rsvp_t * 2084 pm_rsvp_lookup(dev_info_t *dip, int comp) 2085 { 2086 pm_rsvp_t *p; 2087 ASSERT(MUTEX_HELD(&pm_rsvp_lock)); 2088 for (p = pm_blocked_list; p; p = p->pr_next) 2089 if (p->pr_dip == dip && p->pr_comp == comp) { 2090 return (p); 2091 } 2092 return (NULL); 2093 } 2094 2095 /* 2096 * Called when a device which is direct power managed (or the parent or 2097 * dependent of such a device) changes power, or when a pm clone is closed 2098 * that was direct power managing a device. This call results in pm_blocked() 2099 * (below) returning. 2100 */ 2101 void 2102 pm_proceed(dev_info_t *dip, int cmd, int comp, int newlevel) 2103 { 2104 PMD_FUNC(pmf, "proceed") 2105 pm_rsvp_t *found = NULL; 2106 pm_rsvp_t *p; 2107 2108 mutex_enter(&pm_rsvp_lock); 2109 switch (cmd) { 2110 /* 2111 * we're giving up control, let any pending op continue 2112 */ 2113 case PMP_RELEASE: 2114 for (p = pm_blocked_list; p; p = p->pr_next) { 2115 if (dip == p->pr_dip) { 2116 p->pr_retval = PMP_RELEASE; 2117 PMD(PMD_DPM, ("%s: RELEASE %s@%s(%s#%d)\n", 2118 pmf, PM_DEVICE(dip))) 2119 cv_signal(&p->pr_cv); 2120 } 2121 } 2122 break; 2123 2124 /* 2125 * process has done PM_SET_CURRENT_POWER; let a matching request 2126 * succeed and a non-matching request for the same device fail 2127 */ 2128 case PMP_SETPOWER: 2129 found = pm_rsvp_lookup(dip, comp); 2130 if (!found) /* if driver not waiting */ 2131 break; 2132 /* 2133 * This cannot be pm_lower_power, since that can only happen 2134 * during detach or probe 2135 */ 2136 if (found->pr_newlevel <= newlevel) { 2137 found->pr_retval = PMP_SUCCEED; 2138 PMD(PMD_DPM, ("%s: SUCCEED %s@%s(%s#%d)\n", pmf, 2139 PM_DEVICE(dip))) 2140 } else { 2141 found->pr_retval = PMP_FAIL; 2142 PMD(PMD_DPM, ("%s: FAIL %s@%s(%s#%d)\n", pmf, 2143 PM_DEVICE(dip))) 2144 } 2145 cv_signal(&found->pr_cv); 2146 break; 2147 2148 default: 2149 panic("pm_proceed unknown cmd %d", cmd); 2150 } 2151 mutex_exit(&pm_rsvp_lock); 2152 } 2153 2154 /* 2155 * This routine dispatches new work to the dependency thread. Caller must 2156 * be prepared to block for memory if necessary. 2157 */ 2158 void 2159 pm_dispatch_to_dep_thread(int cmd, char *keeper, char *kept, int wait, 2160 int *res, int cached_pwr) 2161 { 2162 pm_dep_wk_t *new_work; 2163 2164 new_work = kmem_zalloc(sizeof (pm_dep_wk_t), KM_SLEEP); 2165 new_work->pdw_type = cmd; 2166 new_work->pdw_wait = wait; 2167 new_work->pdw_done = 0; 2168 new_work->pdw_ret = 0; 2169 new_work->pdw_pwr = cached_pwr; 2170 cv_init(&new_work->pdw_cv, NULL, CV_DEFAULT, NULL); 2171 if (keeper != NULL) { 2172 new_work->pdw_keeper = kmem_zalloc(strlen(keeper) + 1, 2173 KM_SLEEP); 2174 (void) strcpy(new_work->pdw_keeper, keeper); 2175 } 2176 if (kept != NULL) { 2177 new_work->pdw_kept = kmem_zalloc(strlen(kept) + 1, KM_SLEEP); 2178 (void) strcpy(new_work->pdw_kept, kept); 2179 } 2180 mutex_enter(&pm_dep_thread_lock); 2181 if (pm_dep_thread_workq == NULL) { 2182 pm_dep_thread_workq = new_work; 2183 pm_dep_thread_tail = new_work; 2184 new_work->pdw_next = NULL; 2185 } else { 2186 pm_dep_thread_tail->pdw_next = new_work; 2187 pm_dep_thread_tail = new_work; 2188 new_work->pdw_next = NULL; 2189 } 2190 cv_signal(&pm_dep_thread_cv); 2191 /* If caller asked for it, wait till it is done. */ 2192 if (wait) { 2193 while (!new_work->pdw_done) 2194 cv_wait(&new_work->pdw_cv, &pm_dep_thread_lock); 2195 /* 2196 * Pass return status, if any, back. 2197 */ 2198 if (res != NULL) 2199 *res = new_work->pdw_ret; 2200 /* 2201 * If we asked to wait, it is our job to free the request 2202 * structure. 2203 */ 2204 if (new_work->pdw_keeper) 2205 kmem_free(new_work->pdw_keeper, 2206 strlen(new_work->pdw_keeper) + 1); 2207 if (new_work->pdw_kept) 2208 kmem_free(new_work->pdw_kept, 2209 strlen(new_work->pdw_kept) + 1); 2210 kmem_free(new_work, sizeof (pm_dep_wk_t)); 2211 } 2212 mutex_exit(&pm_dep_thread_lock); 2213 } 2214 2215 /* 2216 * Release the pm resource for this device. 2217 */ 2218 void 2219 pm_rem_info(dev_info_t *dip) 2220 { 2221 PMD_FUNC(pmf, "rem_info") 2222 int i, count = 0; 2223 pm_info_t *info = PM_GET_PM_INFO(dip); 2224 dev_info_t *pdip = ddi_get_parent(dip); 2225 char *pathbuf; 2226 int work_type = PM_DEP_WK_DETACH; 2227 2228 ASSERT(info); 2229 2230 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 2231 if (PM_ISDIRECT(dip)) { 2232 info->pmi_dev_pm_state &= ~PM_DIRECT; 2233 ASSERT(info->pmi_clone); 2234 info->pmi_clone = 0; 2235 pm_proceed(dip, PMP_RELEASE, -1, -1); 2236 } 2237 ASSERT(!PM_GET_PM_SCAN(dip)); 2238 2239 /* 2240 * Now adjust parent's kidsupcnt. BC nodes we check only comp 0, 2241 * Others we check all components. BC node that has already 2242 * called pm_destroy_components() has zero component count. 2243 * Parents that get notification are not adjusted because their 2244 * kidsupcnt is always 0 (or 1 during configuration). 2245 */ 2246 PMD(PMD_KEEPS, ("%s: %s@%s(%s#%d) has %d components\n", pmf, 2247 PM_DEVICE(dip), PM_NUMCMPTS(dip))) 2248 2249 /* node is detached, so we can examine power without locking */ 2250 if (PM_ISBC(dip)) { 2251 count = (PM_CURPOWER(dip, 0) != 0); 2252 } else { 2253 for (i = 0; i < PM_NUMCMPTS(dip); i++) 2254 count += (PM_CURPOWER(dip, i) != 0); 2255 } 2256 2257 if (PM_NUMCMPTS(dip) && pdip && !PM_WANTS_NOTIFICATION(pdip)) 2258 e_pm_hold_rele_power(pdip, -count); 2259 2260 /* Schedule a request to clean up dependency records */ 2261 pathbuf = kmem_zalloc(MAXPATHLEN, KM_SLEEP); 2262 (void) ddi_pathname(dip, pathbuf); 2263 pm_dispatch_to_dep_thread(work_type, pathbuf, pathbuf, 2264 PM_DEP_NOWAIT, NULL, (count > 0)); 2265 kmem_free(pathbuf, MAXPATHLEN); 2266 2267 /* 2268 * Adjust the pm_comps_notlowest count since this device is 2269 * not being power-managed anymore. 2270 */ 2271 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 2272 if (PM_CURPOWER(dip, i) != 0) 2273 PM_DECR_NOTLOWEST(dip); 2274 } 2275 /* 2276 * Once we clear the info pointer, it looks like it is not power 2277 * managed to everybody else. 2278 */ 2279 pm_set_pm_info(dip, NULL); 2280 kmem_free(info, sizeof (pm_info_t)); 2281 } 2282 2283 int 2284 pm_get_norm_pwrs(dev_info_t *dip, int **valuep, size_t *length) 2285 { 2286 int components = PM_NUMCMPTS(dip); 2287 int *bufp; 2288 size_t size; 2289 int i; 2290 2291 if (components <= 0) { 2292 cmn_err(CE_NOTE, "!pm: %s@%s(%s#%d) has no components, " 2293 "can't get normal power values\n", PM_DEVICE(dip)); 2294 return (DDI_FAILURE); 2295 } else { 2296 size = components * sizeof (int); 2297 bufp = kmem_alloc(size, KM_SLEEP); 2298 for (i = 0; i < components; i++) { 2299 bufp[i] = pm_get_normal_power(dip, i); 2300 } 2301 } 2302 *length = size; 2303 *valuep = bufp; 2304 return (DDI_SUCCESS); 2305 } 2306 2307 static int 2308 pm_reset_timestamps(dev_info_t *dip, void *arg) 2309 { 2310 _NOTE(ARGUNUSED(arg)) 2311 2312 int components; 2313 int i; 2314 2315 if (!PM_GET_PM_INFO(dip)) 2316 return (DDI_WALK_CONTINUE); 2317 components = PM_NUMCMPTS(dip); 2318 ASSERT(components > 0); 2319 PM_LOCK_BUSY(dip); 2320 for (i = 0; i < components; i++) { 2321 struct pm_component *cp; 2322 /* 2323 * If the component was not marked as busy, 2324 * reset its timestamp to now. 2325 */ 2326 cp = PM_CP(dip, i); 2327 if (cp->pmc_timestamp) 2328 cp->pmc_timestamp = gethrestime_sec(); 2329 } 2330 PM_UNLOCK_BUSY(dip); 2331 return (DDI_WALK_CONTINUE); 2332 } 2333 2334 /* 2335 * Convert a power level to an index into the levels array (or 2336 * just PM_LEVEL_UNKNOWN in that special case). 2337 */ 2338 static int 2339 pm_level_to_index(dev_info_t *dip, pm_component_t *cp, int level) 2340 { 2341 PMD_FUNC(pmf, "level_to_index") 2342 int i; 2343 int limit = cp->pmc_comp.pmc_numlevels; 2344 int *ip = cp->pmc_comp.pmc_lvals; 2345 2346 if (level == PM_LEVEL_UNKNOWN) 2347 return (level); 2348 2349 for (i = 0; i < limit; i++) { 2350 if (level == *ip++) { 2351 PMD(PMD_LEVEL, ("%s: %s@%s(%s#%d)[%d] to %x\n", 2352 pmf, PM_DEVICE(dip), 2353 (int)(cp - DEVI(dip)->devi_pm_components), level)) 2354 return (i); 2355 } 2356 } 2357 panic("pm_level_to_index: level %d not found for device " 2358 "%s@%s(%s#%d)", level, PM_DEVICE(dip)); 2359 /*NOTREACHED*/ 2360 } 2361 2362 /* 2363 * Internal function to set current power level 2364 */ 2365 static void 2366 e_pm_set_cur_pwr(dev_info_t *dip, pm_component_t *cp, int level) 2367 { 2368 PMD_FUNC(pmf, "set_cur_pwr") 2369 int curpwr = (cp->pmc_flags & PM_PHC_WHILE_SET_POWER ? 2370 cp->pmc_phc_pwr : cp->pmc_cur_pwr); 2371 2372 /* 2373 * Nothing to adjust if current & new levels are the same. 2374 */ 2375 if (curpwr != PM_LEVEL_UNKNOWN && 2376 level == cp->pmc_comp.pmc_lvals[curpwr]) 2377 return; 2378 2379 /* 2380 * Keep the count for comps doing transition to/from lowest 2381 * level. 2382 */ 2383 if (curpwr == 0) { 2384 PM_INCR_NOTLOWEST(dip); 2385 } else if (level == cp->pmc_comp.pmc_lvals[0]) { 2386 PM_DECR_NOTLOWEST(dip); 2387 } 2388 cp->pmc_phc_pwr = PM_LEVEL_UNKNOWN; 2389 cp->pmc_cur_pwr = pm_level_to_index(dip, cp, level); 2390 } 2391 2392 /* 2393 * This is the default method of setting the power of a device if no ppm 2394 * driver has claimed it. 2395 */ 2396 int 2397 pm_power(dev_info_t *dip, int comp, int level) 2398 { 2399 PMD_FUNC(pmf, "power") 2400 struct dev_ops *ops; 2401 int (*fn)(dev_info_t *, int, int); 2402 struct pm_component *cp = PM_CP(dip, comp); 2403 int retval; 2404 pm_info_t *info = PM_GET_PM_INFO(dip); 2405 static int pm_phc_impl(dev_info_t *, int, int, int); 2406 2407 PMD(PMD_KIDSUP, ("%s: %s@%s(%s#%d), comp=%d, level=%d\n", pmf, 2408 PM_DEVICE(dip), comp, level)) 2409 if (!(ops = ddi_get_driver(dip))) { 2410 PMD(PMD_FAIL, ("%s: %s@%s(%s#%d) has no ops\n", pmf, 2411 PM_DEVICE(dip))) 2412 return (DDI_FAILURE); 2413 } 2414 if ((ops->devo_rev < 2) || !(fn = ops->devo_power)) { 2415 PMD(PMD_FAIL, ("%s: %s%s\n", pmf, 2416 (ops->devo_rev < 2 ? " wrong devo_rev" : ""), 2417 (!fn ? " devo_power NULL" : ""))) 2418 return (DDI_FAILURE); 2419 } 2420 cp->pmc_flags |= PM_POWER_OP; 2421 retval = (*fn)(dip, comp, level); 2422 cp->pmc_flags &= ~PM_POWER_OP; 2423 if (retval == DDI_SUCCESS) { 2424 e_pm_set_cur_pwr(dip, PM_CP(dip, comp), level); 2425 return (DDI_SUCCESS); 2426 } 2427 2428 /* 2429 * If pm_power_has_changed() detected a deadlock with pm_power() it 2430 * updated only the power level of the component. If our attempt to 2431 * set the device new to a power level above has failed we sync the 2432 * total power state via phc code now. 2433 */ 2434 if (cp->pmc_flags & PM_PHC_WHILE_SET_POWER) { 2435 int phc_lvl = 2436 cp->pmc_comp.pmc_lvals[cp->pmc_cur_pwr]; 2437 2438 ASSERT(info); 2439 (void) pm_phc_impl(dip, comp, phc_lvl, 0); 2440 PMD(PMD_PHC, ("%s: phc %s@%s(%s#%d) comp=%d level=%d\n", 2441 pmf, PM_DEVICE(dip), comp, phc_lvl)) 2442 } 2443 2444 PMD(PMD_FAIL, ("%s: can't set comp=%d (%s) of %s@%s(%s#%d) to " 2445 "level=%d (%s)\n", pmf, comp, cp->pmc_comp.pmc_name, PM_DEVICE(dip), 2446 level, power_val_to_string(cp, level))); 2447 return (DDI_FAILURE); 2448 } 2449 2450 int 2451 pm_unmanage(dev_info_t *dip) 2452 { 2453 PMD_FUNC(pmf, "unmanage") 2454 power_req_t power_req; 2455 int result, retval = 0; 2456 2457 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 2458 PMD(PMD_REMDEV | PMD_KIDSUP, ("%s: %s@%s(%s#%d)\n", pmf, 2459 PM_DEVICE(dip))) 2460 power_req.request_type = PMR_PPM_UNMANAGE; 2461 power_req.req.ppm_config_req.who = dip; 2462 if (pm_ppm_claimed(dip)) 2463 retval = pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, 2464 &power_req, &result); 2465 #ifdef DEBUG 2466 else 2467 retval = pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, 2468 &power_req, &result); 2469 #endif 2470 ASSERT(retval == DDI_SUCCESS); 2471 pm_rem_info(dip); 2472 return (retval); 2473 } 2474 2475 int 2476 pm_raise_power(dev_info_t *dip, int comp, int level) 2477 { 2478 if (level < 0) 2479 return (DDI_FAILURE); 2480 if (!e_pm_valid_info(dip, NULL) || !e_pm_valid_comp(dip, comp, NULL) || 2481 !e_pm_valid_power(dip, comp, level)) 2482 return (DDI_FAILURE); 2483 2484 return (dev_is_needed(dip, comp, level, PM_LEVEL_UPONLY)); 2485 } 2486 2487 int 2488 pm_lower_power(dev_info_t *dip, int comp, int level) 2489 { 2490 PMD_FUNC(pmf, "pm_lower_power") 2491 2492 if (!e_pm_valid_info(dip, NULL) || !e_pm_valid_comp(dip, comp, NULL) || 2493 !e_pm_valid_power(dip, comp, level)) { 2494 PMD(PMD_FAIL, ("%s: validation checks failed for %s@%s(%s#%d) " 2495 "comp=%d level=%d\n", pmf, PM_DEVICE(dip), comp, level)) 2496 return (DDI_FAILURE); 2497 } 2498 2499 if (!DEVI_IS_DETACHING(dip)) { 2500 PMD(PMD_FAIL, ("%s: %s@%s(%s#%d) not detaching\n", 2501 pmf, PM_DEVICE(dip))) 2502 return (DDI_FAILURE); 2503 } 2504 2505 /* 2506 * If we don't care about saving power, or we're treating this node 2507 * specially, then this is a no-op 2508 */ 2509 if (!autopm_enabled || pm_noinvol(dip)) { 2510 PMD(PMD_FAIL, ("%s: %s@%s(%s#%d) %s%s\n", pmf, PM_DEVICE(dip), 2511 !autopm_enabled ? "!autopm_enabled " : "", 2512 pm_noinvol(dip) ? "pm_noinvol()" : "")) 2513 return (DDI_SUCCESS); 2514 } 2515 2516 if (dev_is_needed(dip, comp, level, PM_LEVEL_DOWNONLY) != DDI_SUCCESS) { 2517 PMD(PMD_FAIL, ("%s: %s@%s(%s#%d) dev_is_needed failed\n", pmf, 2518 PM_DEVICE(dip))) 2519 return (DDI_FAILURE); 2520 } 2521 return (DDI_SUCCESS); 2522 } 2523 2524 /* 2525 * Find the entries struct for a given dip in the blocked list, return it locked 2526 */ 2527 static psce_t * 2528 pm_psc_dip_to_direct(dev_info_t *dip, pscc_t **psccp) 2529 { 2530 pscc_t *p; 2531 psce_t *psce; 2532 2533 rw_enter(&pm_pscc_direct_rwlock, RW_READER); 2534 for (p = pm_pscc_direct; p; p = p->pscc_next) { 2535 if (p->pscc_dip == dip) { 2536 *psccp = p; 2537 psce = p->pscc_entries; 2538 mutex_enter(&psce->psce_lock); 2539 ASSERT(psce); 2540 rw_exit(&pm_pscc_direct_rwlock); 2541 return (psce); 2542 } 2543 } 2544 rw_exit(&pm_pscc_direct_rwlock); 2545 panic("sunpm: no entry for dip %p in direct list", (void *)dip); 2546 /*NOTREACHED*/ 2547 } 2548 2549 /* 2550 * Write an entry indicating a power level change (to be passed to a process 2551 * later) in the given psce. 2552 * If we were called in the path that brings up the console fb in the 2553 * case of entering the prom, we don't want to sleep. If the alloc fails, then 2554 * we create a record that has a size of -1, a physaddr of NULL, and that 2555 * has the overflow flag set. 2556 */ 2557 static int 2558 psc_entry(ushort_t event, psce_t *psce, dev_info_t *dip, int comp, int new, 2559 int old, int which, pm_canblock_t canblock) 2560 { 2561 char buf[MAXNAMELEN]; 2562 pm_state_change_t *p; 2563 size_t size; 2564 caddr_t physpath = NULL; 2565 int overrun = 0; 2566 2567 ASSERT(MUTEX_HELD(&psce->psce_lock)); 2568 (void) ddi_pathname(dip, buf); 2569 size = strlen(buf) + 1; 2570 p = psce->psce_in; 2571 if (canblock == PM_CANBLOCK_BYPASS) { 2572 physpath = kmem_alloc(size, KM_NOSLEEP); 2573 if (physpath == NULL) { 2574 /* 2575 * mark current entry as overrun 2576 */ 2577 p->flags |= PSC_EVENT_LOST; 2578 size = (size_t)-1; 2579 } 2580 } else 2581 physpath = kmem_alloc(size, KM_SLEEP); 2582 if (p->size) { /* overflow; mark the next entry */ 2583 if (p->size != (size_t)-1) 2584 kmem_free(p->physpath, p->size); 2585 ASSERT(psce->psce_out == p); 2586 if (p == psce->psce_last) { 2587 psce->psce_first->flags |= PSC_EVENT_LOST; 2588 psce->psce_out = psce->psce_first; 2589 } else { 2590 (p + 1)->flags |= PSC_EVENT_LOST; 2591 psce->psce_out = (p + 1); 2592 } 2593 overrun++; 2594 } else if (physpath == NULL) { /* alloc failed, mark this entry */ 2595 p->flags |= PSC_EVENT_LOST; 2596 p->size = 0; 2597 p->physpath = NULL; 2598 } 2599 if (which == PSC_INTEREST) { 2600 mutex_enter(&pm_compcnt_lock); 2601 if (pm_comps_notlowest == 0) 2602 p->flags |= PSC_ALL_LOWEST; 2603 else 2604 p->flags &= ~PSC_ALL_LOWEST; 2605 mutex_exit(&pm_compcnt_lock); 2606 } 2607 p->event = event; 2608 p->timestamp = gethrestime_sec(); 2609 p->component = comp; 2610 p->old_level = old; 2611 p->new_level = new; 2612 p->physpath = physpath; 2613 p->size = size; 2614 if (physpath != NULL) 2615 (void) strcpy(p->physpath, buf); 2616 if (p == psce->psce_last) 2617 psce->psce_in = psce->psce_first; 2618 else 2619 psce->psce_in = ++p; 2620 mutex_exit(&psce->psce_lock); 2621 return (overrun); 2622 } 2623 2624 /* 2625 * Find the next entry on the interest list. We keep a pointer to the item we 2626 * last returned in the user's cooke. Returns a locked entries struct. 2627 */ 2628 static psce_t * 2629 psc_interest(void **cookie, pscc_t **psccp) 2630 { 2631 pscc_t *pscc; 2632 pscc_t **cookiep = (pscc_t **)cookie; 2633 2634 if (*cookiep == NULL) 2635 pscc = pm_pscc_interest; 2636 else 2637 pscc = (*cookiep)->pscc_next; 2638 if (pscc) { 2639 *cookiep = pscc; 2640 *psccp = pscc; 2641 mutex_enter(&pscc->pscc_entries->psce_lock); 2642 return (pscc->pscc_entries); 2643 } else { 2644 return (NULL); 2645 } 2646 } 2647 2648 /* 2649 * Create an entry for a process to pick up indicating a power level change. 2650 */ 2651 static void 2652 pm_enqueue_notify(ushort_t cmd, dev_info_t *dip, int comp, 2653 int newlevel, int oldlevel, pm_canblock_t canblock) 2654 { 2655 PMD_FUNC(pmf, "enqueue_notify") 2656 pscc_t *pscc; 2657 psce_t *psce; 2658 void *cookie = NULL; 2659 int overrun; 2660 2661 ASSERT(MUTEX_HELD(&pm_rsvp_lock)); 2662 switch (cmd) { 2663 case PSC_PENDING_CHANGE: /* only for controlling process */ 2664 PMD(PMD_DPM, ("%s: PENDING %s@%s(%s#%d), comp %d, %d -> %d\n", 2665 pmf, PM_DEVICE(dip), comp, oldlevel, newlevel)) 2666 psce = pm_psc_dip_to_direct(dip, &pscc); 2667 ASSERT(psce); 2668 PMD(PMD_IOCTL, ("%s: PENDING: %s@%s(%s#%d) pm_poll_cnt[%d] " 2669 "%d\n", pmf, PM_DEVICE(dip), pscc->pscc_clone, 2670 pm_poll_cnt[pscc->pscc_clone])) 2671 overrun = psc_entry(cmd, psce, dip, comp, newlevel, oldlevel, 2672 PSC_DIRECT, canblock); 2673 PMD(PMD_DPM, ("%s: sig %d\n", pmf, pscc->pscc_clone)) 2674 mutex_enter(&pm_clone_lock); 2675 if (!overrun) 2676 pm_poll_cnt[pscc->pscc_clone]++; 2677 cv_signal(&pm_clones_cv[pscc->pscc_clone]); 2678 pollwakeup(&pm_pollhead, (POLLRDNORM | POLLIN)); 2679 mutex_exit(&pm_clone_lock); 2680 break; 2681 case PSC_HAS_CHANGED: 2682 PMD(PMD_DPM, ("%s: HAS %s@%s(%s#%d), comp %d, %d -> %d\n", 2683 pmf, PM_DEVICE(dip), comp, oldlevel, newlevel)) 2684 if (PM_ISDIRECT(dip) && canblock != PM_CANBLOCK_BYPASS) { 2685 psce = pm_psc_dip_to_direct(dip, &pscc); 2686 PMD(PMD_IOCTL, ("%s: HAS: %s@%s(%s#%d) pm_poll_cnt[%d] " 2687 "%d\n", pmf, PM_DEVICE(dip), pscc->pscc_clone, 2688 pm_poll_cnt[pscc->pscc_clone])) 2689 overrun = psc_entry(cmd, psce, dip, comp, newlevel, 2690 oldlevel, PSC_DIRECT, canblock); 2691 PMD(PMD_DPM, ("%s: sig %d\n", pmf, pscc->pscc_clone)) 2692 mutex_enter(&pm_clone_lock); 2693 if (!overrun) 2694 pm_poll_cnt[pscc->pscc_clone]++; 2695 cv_signal(&pm_clones_cv[pscc->pscc_clone]); 2696 pollwakeup(&pm_pollhead, (POLLRDNORM | POLLIN)); 2697 mutex_exit(&pm_clone_lock); 2698 } 2699 mutex_enter(&pm_clone_lock); 2700 rw_enter(&pm_pscc_interest_rwlock, RW_READER); 2701 while ((psce = psc_interest(&cookie, &pscc)) != NULL) { 2702 (void) psc_entry(cmd, psce, dip, comp, newlevel, 2703 oldlevel, PSC_INTEREST, canblock); 2704 cv_signal(&pm_clones_cv[pscc->pscc_clone]); 2705 } 2706 rw_exit(&pm_pscc_interest_rwlock); 2707 mutex_exit(&pm_clone_lock); 2708 break; 2709 #ifdef DEBUG 2710 default: 2711 ASSERT(0); 2712 #endif 2713 } 2714 } 2715 2716 static void 2717 pm_enqueue_notify_others(pm_ppm_devlist_t **listp, pm_canblock_t canblock) 2718 { 2719 if (listp) { 2720 pm_ppm_devlist_t *p, *next = NULL; 2721 2722 for (p = *listp; p; p = next) { 2723 next = p->ppd_next; 2724 pm_enqueue_notify(PSC_HAS_CHANGED, p->ppd_who, 2725 p->ppd_cmpt, p->ppd_new_level, p->ppd_old_level, 2726 canblock); 2727 kmem_free(p, sizeof (pm_ppm_devlist_t)); 2728 } 2729 *listp = NULL; 2730 } 2731 } 2732 2733 /* 2734 * Try to get the power locks of the parent node and target (child) 2735 * node. Return true if successful (with both locks held) or false 2736 * (with no locks held). 2737 */ 2738 static int 2739 pm_try_parent_child_locks(dev_info_t *pdip, 2740 dev_info_t *dip, int *pcircp, int *circp) 2741 { 2742 if (ndi_devi_tryenter(pdip, pcircp)) 2743 if (PM_TRY_LOCK_POWER(dip, circp)) { 2744 return (1); 2745 } else { 2746 ndi_devi_exit(pdip, *pcircp); 2747 } 2748 return (0); 2749 } 2750 2751 /* 2752 * Determine if the power lock owner is blocked by current thread. 2753 * returns : 2754 * 1 - If the thread owning the effective power lock (the first lock on 2755 * which a thread blocks when it does PM_LOCK_POWER) is blocked by 2756 * a mutex held by the current thread. 2757 * 2758 * 0 - otherwise 2759 * 2760 * Note : This function is called by pm_power_has_changed to determine whether 2761 * it is executing in parallel with pm_set_power. 2762 */ 2763 static int 2764 pm_blocked_by_us(dev_info_t *dip) 2765 { 2766 power_req_t power_req; 2767 kthread_t *owner; 2768 int result; 2769 kmutex_t *mp; 2770 dev_info_t *ppm = (dev_info_t *)DEVI(dip)->devi_pm_ppm; 2771 2772 power_req.request_type = PMR_PPM_POWER_LOCK_OWNER; 2773 power_req.req.ppm_power_lock_owner_req.who = dip; 2774 if (pm_ctlops(ppm, dip, DDI_CTLOPS_POWER, &power_req, &result) != 2775 DDI_SUCCESS) { 2776 /* 2777 * It is assumed that if the device is claimed by ppm, ppm 2778 * will always implement this request type and it'll always 2779 * return success. We panic here, if it fails. 2780 */ 2781 panic("pm: Can't determine power lock owner of %s@%s(%s#%d)\n", 2782 PM_DEVICE(dip)); 2783 /*NOTREACHED*/ 2784 } 2785 2786 if ((owner = power_req.req.ppm_power_lock_owner_req.owner) != NULL && 2787 owner->t_state == TS_SLEEP && 2788 owner->t_sobj_ops && 2789 SOBJ_TYPE(owner->t_sobj_ops) == SOBJ_MUTEX && 2790 (mp = (kmutex_t *)owner->t_wchan) && 2791 mutex_owner(mp) == curthread) 2792 return (1); 2793 2794 return (0); 2795 } 2796 2797 /* 2798 * Notify parent which wants to hear about a child's power changes. 2799 */ 2800 static void 2801 pm_notify_parent(dev_info_t *dip, 2802 dev_info_t *pdip, int comp, int old_level, int level) 2803 { 2804 pm_bp_has_changed_t bphc; 2805 pm_sp_misc_t pspm; 2806 char *pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 2807 int result = DDI_SUCCESS; 2808 2809 bphc.bphc_dip = dip; 2810 bphc.bphc_path = ddi_pathname(dip, pathbuf); 2811 bphc.bphc_comp = comp; 2812 bphc.bphc_olevel = old_level; 2813 bphc.bphc_nlevel = level; 2814 pspm.pspm_canblock = PM_CANBLOCK_BLOCK; 2815 pspm.pspm_scan = 0; 2816 bphc.bphc_private = &pspm; 2817 (void) (*PM_BUS_POWER_FUNC(pdip))(pdip, NULL, 2818 BUS_POWER_HAS_CHANGED, (void *)&bphc, (void *)&result); 2819 kmem_free(pathbuf, MAXPATHLEN); 2820 } 2821 2822 /* 2823 * Check if we need to resume a BC device, and make the attach call as required. 2824 */ 2825 static int 2826 pm_check_and_resume(dev_info_t *dip, int comp, int old_level, int level) 2827 { 2828 int ret = DDI_SUCCESS; 2829 2830 if (PM_ISBC(dip) && comp == 0 && old_level == 0 && level != 0) { 2831 ASSERT(DEVI(dip)->devi_pm_flags & PMC_SUSPENDED); 2832 /* ppm is not interested in DDI_PM_RESUME */ 2833 if ((ret = devi_attach(dip, DDI_PM_RESUME)) != DDI_SUCCESS) 2834 /* XXX Should we mark it resumed, */ 2835 /* even though it failed? */ 2836 cmn_err(CE_WARN, "!pm: Can't resume %s@%s", 2837 PM_NAME(dip), PM_ADDR(dip)); 2838 DEVI(dip)->devi_pm_flags &= ~PMC_SUSPENDED; 2839 } 2840 2841 return (ret); 2842 } 2843 2844 /* 2845 * Tests outside the lock to see if we should bother to enqueue an entry 2846 * for any watching process. If yes, then caller will take the lock and 2847 * do the full protocol 2848 */ 2849 static int 2850 pm_watchers() 2851 { 2852 if (pm_processes_stopped) 2853 return (0); 2854 return (pm_pscc_direct || pm_pscc_interest); 2855 } 2856 2857 /* 2858 * A driver is reporting that the power of one of its device's components 2859 * has changed. Update the power state accordingly. 2860 */ 2861 int 2862 pm_power_has_changed(dev_info_t *dip, int comp, int level) 2863 { 2864 PMD_FUNC(pmf, "pm_power_has_changed") 2865 int ret; 2866 dev_info_t *pdip = ddi_get_parent(dip); 2867 struct pm_component *cp; 2868 int blocked, circ, pcirc, old_level; 2869 static int pm_phc_impl(dev_info_t *, int, int, int); 2870 2871 if (level < 0) { 2872 PMD(PMD_FAIL, ("%s: %s@%s(%s#%d): bad level=%d\n", pmf, 2873 PM_DEVICE(dip), level)) 2874 return (DDI_FAILURE); 2875 } 2876 2877 PMD(PMD_KIDSUP | PMD_DEP, ("%s: %s@%s(%s#%d), comp=%d, level=%d\n", pmf, 2878 PM_DEVICE(dip), comp, level)) 2879 2880 if (!e_pm_valid_info(dip, NULL) || !e_pm_valid_comp(dip, comp, &cp) || 2881 !e_pm_valid_power(dip, comp, level)) 2882 return (DDI_FAILURE); 2883 2884 /* 2885 * A driver thread calling pm_power_has_changed and another thread 2886 * calling pm_set_power can deadlock. The problem is not resolvable 2887 * by changing lock order, so we use pm_blocked_by_us() to detect 2888 * this specific deadlock. If we can't get the lock immediately 2889 * and we are deadlocked, just update the component's level, do 2890 * notifications, and return. We intend to update the total power 2891 * state later (if the other thread fails to set power to the 2892 * desired level). If we were called because of a power change on a 2893 * component that isn't involved in a set_power op, update all state 2894 * immediately. 2895 */ 2896 cp = PM_CP(dip, comp); 2897 while (!pm_try_parent_child_locks(pdip, dip, &pcirc, &circ)) { 2898 if (((blocked = pm_blocked_by_us(dip)) != 0) && 2899 (cp->pmc_flags & PM_POWER_OP)) { 2900 if (pm_watchers()) { 2901 mutex_enter(&pm_rsvp_lock); 2902 pm_enqueue_notify(PSC_HAS_CHANGED, dip, comp, 2903 level, cur_power(cp), PM_CANBLOCK_BLOCK); 2904 mutex_exit(&pm_rsvp_lock); 2905 } 2906 if (pdip && PM_WANTS_NOTIFICATION(pdip)) 2907 pm_notify_parent(dip, 2908 pdip, comp, cur_power(cp), level); 2909 (void) pm_check_and_resume(dip, 2910 comp, cur_power(cp), level); 2911 2912 /* 2913 * Stash the old power index, update curpwr, and flag 2914 * that the total power state needs to be synched. 2915 */ 2916 cp->pmc_flags |= PM_PHC_WHILE_SET_POWER; 2917 /* 2918 * Several pm_power_has_changed calls could arrive 2919 * while the set power path remains blocked. Keep the 2920 * oldest old power and the newest new power of any 2921 * sequence of phc calls which arrive during deadlock. 2922 */ 2923 if (cp->pmc_phc_pwr == PM_LEVEL_UNKNOWN) 2924 cp->pmc_phc_pwr = cp->pmc_cur_pwr; 2925 cp->pmc_cur_pwr = 2926 pm_level_to_index(dip, cp, level); 2927 PMD(PMD_PHC, ("%s: deadlock for %s@%s(%s#%d), comp=%d, " 2928 "level=%d\n", pmf, PM_DEVICE(dip), comp, level)) 2929 return (DDI_SUCCESS); 2930 } else 2931 if (blocked) { /* blocked, but different cmpt? */ 2932 if (!ndi_devi_tryenter(pdip, &pcirc)) { 2933 cmn_err(CE_NOTE, 2934 "!pm: parent kuc not updated due " 2935 "to possible deadlock.\n"); 2936 return (pm_phc_impl(dip, 2937 comp, level, 1)); 2938 } 2939 old_level = cur_power(cp); 2940 if (pdip && !PM_WANTS_NOTIFICATION(pdip) && 2941 (!PM_ISBC(dip) || comp == 0) && 2942 POWERING_ON(old_level, level)) 2943 pm_hold_power(pdip); 2944 ret = pm_phc_impl(dip, comp, level, 1); 2945 if (pdip && !PM_WANTS_NOTIFICATION(pdip)) { 2946 if ((!PM_ISBC(dip) || 2947 comp == 0) && level == 0 && 2948 old_level != PM_LEVEL_UNKNOWN) 2949 pm_rele_power(pdip); 2950 } 2951 ndi_devi_exit(pdip, pcirc); 2952 /* child lock not held: deadlock */ 2953 return (ret); 2954 } 2955 delay(1); 2956 PMD(PMD_PHC, ("%s: try lock again\n", pmf)) 2957 } 2958 2959 /* non-deadlock case */ 2960 old_level = cur_power(cp); 2961 if (pdip && !PM_WANTS_NOTIFICATION(pdip) && 2962 (!PM_ISBC(dip) || comp == 0) && POWERING_ON(old_level, level)) 2963 pm_hold_power(pdip); 2964 ret = pm_phc_impl(dip, comp, level, 1); 2965 if (pdip && !PM_WANTS_NOTIFICATION(pdip)) { 2966 if ((!PM_ISBC(dip) || comp == 0) && level == 0 && 2967 old_level != PM_LEVEL_UNKNOWN) 2968 pm_rele_power(pdip); 2969 } 2970 PM_UNLOCK_POWER(dip, circ); 2971 ndi_devi_exit(pdip, pcirc); 2972 return (ret); 2973 } 2974 2975 /* 2976 * Account for power changes to a component of the the console frame buffer. 2977 * If lowering power from full (or "unkown", which is treatd as full) 2978 * we will increment the "components off" count of the fb device. 2979 * Subsequent lowering of the same component doesn't affect the count. If 2980 * raising a component back to full power, we will decrement the count. 2981 * 2982 * Return: the increment value for pm_cfb_comps_off (-1, 0, or 1) 2983 */ 2984 static int 2985 calc_cfb_comps_incr(dev_info_t *dip, int cmpt, int old, int new) 2986 { 2987 struct pm_component *cp = PM_CP(dip, cmpt); 2988 int on = (old == PM_LEVEL_UNKNOWN || old == cp->pmc_norm_pwr); 2989 int want_normal = (new == cp->pmc_norm_pwr); 2990 int incr = 0; 2991 2992 if (on && !want_normal) 2993 incr = 1; 2994 else if (!on && want_normal) 2995 incr = -1; 2996 return (incr); 2997 } 2998 2999 /* 3000 * Adjust the count of console frame buffer components < full power. 3001 */ 3002 static void 3003 update_comps_off(int incr, dev_info_t *dip) 3004 { 3005 mutex_enter(&pm_cfb_lock); 3006 pm_cfb_comps_off += incr; 3007 ASSERT(pm_cfb_comps_off <= PM_NUMCMPTS(dip)); 3008 mutex_exit(&pm_cfb_lock); 3009 } 3010 3011 /* 3012 * Update the power state in the framework (via the ppm). The 'notify' 3013 * argument tells whether to notify watchers. Power lock is already held. 3014 */ 3015 static int 3016 pm_phc_impl(dev_info_t *dip, int comp, int level, int notify) 3017 { 3018 PMD_FUNC(pmf, "phc_impl") 3019 power_req_t power_req; 3020 int i, dodeps = 0; 3021 dev_info_t *pdip = ddi_get_parent(dip); 3022 int result; 3023 int old_level; 3024 struct pm_component *cp; 3025 int incr = 0; 3026 dev_info_t *ppm = (dev_info_t *)DEVI(dip)->devi_pm_ppm; 3027 int work_type = 0; 3028 char *pathbuf; 3029 3030 /* Must use "official" power level for this test. */ 3031 cp = PM_CP(dip, comp); 3032 old_level = (cp->pmc_flags & PM_PHC_WHILE_SET_POWER ? 3033 cp->pmc_phc_pwr : cp->pmc_cur_pwr); 3034 if (old_level != PM_LEVEL_UNKNOWN) 3035 old_level = cp->pmc_comp.pmc_lvals[old_level]; 3036 3037 if (level == old_level) { 3038 PMD(PMD_SET, ("%s: %s@%s(%s#%d), comp=%d is already at " 3039 "level=%d\n", pmf, PM_DEVICE(dip), comp, level)) 3040 return (DDI_SUCCESS); 3041 } 3042 3043 /* 3044 * Tell ppm about this. 3045 */ 3046 power_req.request_type = PMR_PPM_POWER_CHANGE_NOTIFY; 3047 power_req.req.ppm_notify_level_req.who = dip; 3048 power_req.req.ppm_notify_level_req.cmpt = comp; 3049 power_req.req.ppm_notify_level_req.new_level = level; 3050 power_req.req.ppm_notify_level_req.old_level = old_level; 3051 if (pm_ctlops(ppm, dip, DDI_CTLOPS_POWER, &power_req, 3052 &result) == DDI_FAILURE) { 3053 PMD(PMD_FAIL, ("%s: pm_ctlops %s@%s(%s#%d) to %d failed\n", 3054 pmf, PM_DEVICE(dip), level)) 3055 return (DDI_FAILURE); 3056 } 3057 3058 if (PM_IS_CFB(dip)) { 3059 incr = calc_cfb_comps_incr(dip, comp, old_level, level); 3060 3061 if (incr) { 3062 update_comps_off(incr, dip); 3063 PMD(PMD_CFB, ("%s: %s@%s(%s#%d) comp=%d %d->%d " 3064 "cfb_comps_off->%d\n", pmf, PM_DEVICE(dip), 3065 comp, old_level, level, pm_cfb_comps_off)) 3066 } 3067 } 3068 e_pm_set_cur_pwr(dip, PM_CP(dip, comp), level); 3069 result = DDI_SUCCESS; 3070 3071 if (notify) { 3072 if (pdip && PM_WANTS_NOTIFICATION(pdip)) 3073 pm_notify_parent(dip, pdip, comp, old_level, level); 3074 (void) pm_check_and_resume(dip, comp, old_level, level); 3075 } 3076 3077 /* 3078 * Decrement the dependency kidsup count if we turn a device 3079 * off. 3080 */ 3081 if (POWERING_OFF(old_level, level)) { 3082 dodeps = 1; 3083 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 3084 cp = PM_CP(dip, i); 3085 if (cur_power(cp)) { 3086 dodeps = 0; 3087 break; 3088 } 3089 } 3090 if (dodeps) 3091 work_type = PM_DEP_WK_POWER_OFF; 3092 } 3093 3094 /* 3095 * Increment if we turn it on. Check to see 3096 * if other comps are already on, if so, 3097 * dont increment. 3098 */ 3099 if (POWERING_ON(old_level, level)) { 3100 dodeps = 1; 3101 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 3102 cp = PM_CP(dip, i); 3103 if (comp == i) 3104 continue; 3105 /* -1 also treated as 0 in this case */ 3106 if (cur_power(cp) > 0) { 3107 dodeps = 0; 3108 break; 3109 } 3110 } 3111 if (dodeps) 3112 work_type = PM_DEP_WK_POWER_ON; 3113 } 3114 3115 if (dodeps) { 3116 pathbuf = kmem_zalloc(MAXPATHLEN, KM_SLEEP); 3117 (void) ddi_pathname(dip, pathbuf); 3118 pm_dispatch_to_dep_thread(work_type, pathbuf, NULL, 3119 PM_DEP_NOWAIT, NULL, 0); 3120 kmem_free(pathbuf, MAXPATHLEN); 3121 } 3122 3123 if (notify && (level != old_level) && pm_watchers()) { 3124 mutex_enter(&pm_rsvp_lock); 3125 pm_enqueue_notify(PSC_HAS_CHANGED, dip, comp, level, old_level, 3126 PM_CANBLOCK_BLOCK); 3127 mutex_exit(&pm_rsvp_lock); 3128 } 3129 3130 PMD(PMD_RESCAN, ("%s: %s@%s(%s#%d): pm_rescan\n", pmf, PM_DEVICE(dip))) 3131 pm_rescan(dip); 3132 return (DDI_SUCCESS); 3133 } 3134 3135 /* 3136 * This function is called at startup time to notify pm of the existence 3137 * of any platform power managers for this platform. As a result of 3138 * this registration, each function provided will be called each time 3139 * a device node is attached, until one returns true, and it must claim the 3140 * device node (by returning non-zero) if it wants to be involved in the 3141 * node's power management. If it does claim the node, then it will 3142 * subsequently be notified of attach and detach events. 3143 * 3144 */ 3145 3146 int 3147 pm_register_ppm(int (*func)(dev_info_t *), dev_info_t *dip) 3148 { 3149 PMD_FUNC(pmf, "register_ppm") 3150 struct ppm_callbacks *ppmcp; 3151 pm_component_t *cp; 3152 int i, pwr, result, circ; 3153 power_req_t power_req; 3154 struct ppm_notify_level_req *p = &power_req.req.ppm_notify_level_req; 3155 void pm_ppm_claim(dev_info_t *); 3156 3157 mutex_enter(&ppm_lock); 3158 ppmcp = ppm_callbacks; 3159 for (i = 0; i < MAX_PPM_HANDLERS; i++, ppmcp++) { 3160 if (ppmcp->ppmc_func == NULL) { 3161 ppmcp->ppmc_func = func; 3162 ppmcp->ppmc_dip = dip; 3163 break; 3164 } 3165 } 3166 mutex_exit(&ppm_lock); 3167 3168 if (i >= MAX_PPM_HANDLERS) 3169 return (DDI_FAILURE); 3170 while ((dip = ddi_get_parent(dip)) != NULL) { 3171 if (PM_GET_PM_INFO(dip) == NULL) 3172 continue; 3173 pm_ppm_claim(dip); 3174 if (pm_ppm_claimed(dip)) { 3175 /* 3176 * Tell ppm about this. 3177 */ 3178 power_req.request_type = PMR_PPM_POWER_CHANGE_NOTIFY; 3179 p->old_level = PM_LEVEL_UNKNOWN; 3180 p->who = dip; 3181 PM_LOCK_POWER(dip, &circ); 3182 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 3183 cp = PM_CP(dip, i); 3184 pwr = cp->pmc_cur_pwr; 3185 if (pwr != PM_LEVEL_UNKNOWN) { 3186 p->cmpt = i; 3187 p->new_level = cur_power(cp); 3188 p->old_level = PM_LEVEL_UNKNOWN; 3189 if (pm_ctlops(PPM(dip), dip, 3190 DDI_CTLOPS_POWER, &power_req, 3191 &result) == DDI_FAILURE) { 3192 PMD(PMD_FAIL, ("%s: pc " 3193 "%s@%s(%s#%d) to %d " 3194 "fails\n", pmf, 3195 PM_DEVICE(dip), pwr)) 3196 } 3197 } 3198 } 3199 PM_UNLOCK_POWER(dip, circ); 3200 } 3201 } 3202 return (DDI_SUCCESS); 3203 } 3204 3205 /* 3206 * Call the ppm's that have registered and adjust the devinfo struct as 3207 * appropriate. First one to claim it gets it. The sets of devices claimed 3208 * by each ppm are assumed to be disjoint. 3209 */ 3210 void 3211 pm_ppm_claim(dev_info_t *dip) 3212 { 3213 struct ppm_callbacks *ppmcp; 3214 3215 if (PPM(dip)) { 3216 return; 3217 } 3218 mutex_enter(&ppm_lock); 3219 for (ppmcp = ppm_callbacks; ppmcp->ppmc_func; ppmcp++) { 3220 if ((*ppmcp->ppmc_func)(dip)) { 3221 DEVI(dip)->devi_pm_ppm = 3222 (struct dev_info *)ppmcp->ppmc_dip; 3223 mutex_exit(&ppm_lock); 3224 return; 3225 } 3226 } 3227 mutex_exit(&ppm_lock); 3228 } 3229 3230 /* 3231 * Node is being detached so stop autopm until we see if it succeeds, in which 3232 * case pm_stop will be called. For backwards compatible devices we bring the 3233 * device up to full power on the assumption the detach will succeed. 3234 */ 3235 void 3236 pm_detaching(dev_info_t *dip) 3237 { 3238 PMD_FUNC(pmf, "detaching") 3239 pm_info_t *info = PM_GET_PM_INFO(dip); 3240 int iscons; 3241 3242 PMD(PMD_REMDEV, ("%s: %s@%s(%s#%d), %d comps\n", pmf, PM_DEVICE(dip), 3243 PM_NUMCMPTS(dip))) 3244 if (info == NULL) 3245 return; 3246 ASSERT(DEVI_IS_DETACHING(dip)); 3247 PM_LOCK_DIP(dip); 3248 info->pmi_dev_pm_state |= PM_DETACHING; 3249 PM_UNLOCK_DIP(dip); 3250 if (!PM_ISBC(dip)) 3251 pm_scan_stop(dip); 3252 3253 /* 3254 * console and old-style devices get brought up when detaching. 3255 */ 3256 iscons = PM_IS_CFB(dip); 3257 if (iscons || PM_ISBC(dip)) { 3258 (void) pm_all_to_normal(dip, PM_CANBLOCK_BYPASS); 3259 if (iscons) { 3260 mutex_enter(&pm_cfb_lock); 3261 while (cfb_inuse) { 3262 mutex_exit(&pm_cfb_lock); 3263 PMD(PMD_CFB, ("%s: delay; cfb_inuse\n", pmf)) 3264 delay(1); 3265 mutex_enter(&pm_cfb_lock); 3266 } 3267 ASSERT(cfb_dip_detaching == NULL); 3268 ASSERT(cfb_dip); 3269 cfb_dip_detaching = cfb_dip; /* case detach fails */ 3270 cfb_dip = NULL; 3271 mutex_exit(&pm_cfb_lock); 3272 } 3273 } 3274 } 3275 3276 /* 3277 * Node failed to detach. If it used to be autopm'd, make it so again. 3278 */ 3279 void 3280 pm_detach_failed(dev_info_t *dip) 3281 { 3282 PMD_FUNC(pmf, "detach_failed") 3283 pm_info_t *info = PM_GET_PM_INFO(dip); 3284 int pm_all_at_normal(dev_info_t *); 3285 3286 if (info == NULL) 3287 return; 3288 ASSERT(DEVI_IS_DETACHING(dip)); 3289 if (info->pmi_dev_pm_state & PM_DETACHING) { 3290 info->pmi_dev_pm_state &= ~PM_DETACHING; 3291 if (info->pmi_dev_pm_state & PM_ALLNORM_DEFERRED) { 3292 /* Make sure the operation is still needed */ 3293 if (!pm_all_at_normal(dip)) { 3294 if (pm_all_to_normal(dip, 3295 PM_CANBLOCK_FAIL) != DDI_SUCCESS) { 3296 PMD(PMD_ERROR, ("%s: could not bring " 3297 "%s@%s(%s#%d) to normal\n", pmf, 3298 PM_DEVICE(dip))) 3299 } 3300 } 3301 info->pmi_dev_pm_state &= ~PM_ALLNORM_DEFERRED; 3302 } 3303 } 3304 if (!PM_ISBC(dip)) { 3305 mutex_enter(&pm_scan_lock); 3306 if (autopm_enabled) 3307 pm_scan_init(dip); 3308 mutex_exit(&pm_scan_lock); 3309 pm_rescan(dip); 3310 } 3311 } 3312 3313 /* generic Backwards Compatible component */ 3314 static char *bc_names[] = {"off", "on"}; 3315 3316 static pm_comp_t bc_comp = {"unknown", 2, NULL, NULL, &bc_names[0]}; 3317 3318 static void 3319 e_pm_default_levels(dev_info_t *dip, pm_component_t *cp, int norm) 3320 { 3321 pm_comp_t *pmc; 3322 pmc = &cp->pmc_comp; 3323 pmc->pmc_numlevels = 2; 3324 pmc->pmc_lvals[0] = 0; 3325 pmc->pmc_lvals[1] = norm; 3326 e_pm_set_cur_pwr(dip, cp, norm); 3327 } 3328 3329 static void 3330 e_pm_default_components(dev_info_t *dip, int cmpts) 3331 { 3332 int i; 3333 pm_component_t *p = DEVI(dip)->devi_pm_components; 3334 3335 p = DEVI(dip)->devi_pm_components; 3336 for (i = 0; i < cmpts; i++, p++) { 3337 p->pmc_comp = bc_comp; /* struct assignment */ 3338 p->pmc_comp.pmc_lvals = kmem_zalloc(2 * sizeof (int), 3339 KM_SLEEP); 3340 p->pmc_comp.pmc_thresh = kmem_alloc(2 * sizeof (int), 3341 KM_SLEEP); 3342 p->pmc_comp.pmc_numlevels = 2; 3343 p->pmc_comp.pmc_thresh[0] = INT_MAX; 3344 p->pmc_comp.pmc_thresh[1] = INT_MAX; 3345 } 3346 } 3347 3348 /* 3349 * Called from functions that require components to exist already to allow 3350 * for their creation by parsing the pm-components property. 3351 * Device will not be power managed as a result of this call 3352 * No locking needed because we're single threaded by the ndi_devi_enter 3353 * done while attaching, and the device isn't visible until after it has 3354 * attached 3355 */ 3356 int 3357 pm_premanage(dev_info_t *dip, int style) 3358 { 3359 PMD_FUNC(pmf, "premanage") 3360 pm_comp_t *pcp, *compp; 3361 int cmpts, i, norm, error; 3362 pm_component_t *p = DEVI(dip)->devi_pm_components; 3363 pm_comp_t *pm_autoconfig(dev_info_t *, int *); 3364 3365 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 3366 /* 3367 * If this dip has already been processed, don't mess with it 3368 */ 3369 if (DEVI(dip)->devi_pm_flags & PMC_COMPONENTS_DONE) 3370 return (DDI_SUCCESS); 3371 if (DEVI(dip)->devi_pm_flags & PMC_COMPONENTS_FAILED) { 3372 return (DDI_FAILURE); 3373 } 3374 /* 3375 * Look up pm-components property and create components accordingly 3376 * If that fails, fall back to backwards compatibility 3377 */ 3378 if ((compp = pm_autoconfig(dip, &error)) == NULL) { 3379 /* 3380 * If error is set, the property existed but was not well formed 3381 */ 3382 if (error || (style == PM_STYLE_NEW)) { 3383 DEVI(dip)->devi_pm_flags |= PMC_COMPONENTS_FAILED; 3384 return (DDI_FAILURE); 3385 } 3386 /* 3387 * If they don't have the pm-components property, then we 3388 * want the old "no pm until PM_SET_DEVICE_THRESHOLDS ioctl" 3389 * behavior driver must have called pm_create_components, and 3390 * we need to flesh out dummy components 3391 */ 3392 if ((cmpts = PM_NUMCMPTS(dip)) == 0) { 3393 /* 3394 * Not really failure, but we don't want the 3395 * caller to treat it as success 3396 */ 3397 return (DDI_FAILURE); 3398 } 3399 DEVI(dip)->devi_pm_flags |= PMC_BC; 3400 e_pm_default_components(dip, cmpts); 3401 for (i = 0; i < cmpts; i++) { 3402 /* 3403 * if normal power not set yet, we don't really know 3404 * what *ANY* of the power values are. If normal 3405 * power is set, then we assume for this backwards 3406 * compatible case that the values are 0, normal power. 3407 */ 3408 norm = pm_get_normal_power(dip, i); 3409 if (norm == (uint_t)-1) { 3410 PMD(PMD_ERROR, ("%s: %s@%s(%s#%d)[%d]\n", pmf, 3411 PM_DEVICE(dip), i)) 3412 return (DDI_FAILURE); 3413 } 3414 /* 3415 * Components of BC devices start at their normal power, 3416 * so count them to be not at their lowest power. 3417 */ 3418 PM_INCR_NOTLOWEST(dip); 3419 e_pm_default_levels(dip, PM_CP(dip, i), norm); 3420 } 3421 } else { 3422 /* 3423 * e_pm_create_components was called from pm_autoconfig(), it 3424 * creates components with no descriptions (or known levels) 3425 */ 3426 cmpts = PM_NUMCMPTS(dip); 3427 ASSERT(cmpts != 0); 3428 pcp = compp; 3429 p = DEVI(dip)->devi_pm_components; 3430 for (i = 0; i < cmpts; i++, p++) { 3431 p->pmc_comp = *pcp++; /* struct assignment */ 3432 ASSERT(PM_CP(dip, i)->pmc_cur_pwr == 0); 3433 e_pm_set_cur_pwr(dip, PM_CP(dip, i), PM_LEVEL_UNKNOWN); 3434 } 3435 pm_set_device_threshold(dip, pm_system_idle_threshold, 3436 PMC_DEF_THRESH); 3437 kmem_free(compp, cmpts * sizeof (pm_comp_t)); 3438 } 3439 return (DDI_SUCCESS); 3440 } 3441 3442 /* 3443 * Called from during or after the device's attach to let us know it is ready 3444 * to play autopm. Look up the pm model and manage the device accordingly. 3445 * Returns system call errno value. 3446 * If DDI_ATTACH and DDI_DETACH were in same namespace, this would be 3447 * a little cleaner 3448 * 3449 * Called with dip lock held, return with dip lock unheld. 3450 */ 3451 3452 int 3453 e_pm_manage(dev_info_t *dip, int style) 3454 { 3455 PMD_FUNC(pmf, "e_manage") 3456 pm_info_t *info; 3457 dev_info_t *pdip = ddi_get_parent(dip); 3458 int pm_thresh_specd(dev_info_t *); 3459 int count; 3460 char *pathbuf; 3461 3462 if (pm_premanage(dip, style) != DDI_SUCCESS) { 3463 return (DDI_FAILURE); 3464 } 3465 PMD(PMD_KIDSUP, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 3466 ASSERT(PM_GET_PM_INFO(dip) == NULL); 3467 info = kmem_zalloc(sizeof (pm_info_t), KM_SLEEP); 3468 3469 /* 3470 * Now set up parent's kidsupcnt. BC nodes are assumed to start 3471 * out at their normal power, so they are "up", others start out 3472 * unknown, which is effectively "up". Parent which want notification 3473 * get kidsupcnt of 0 always. 3474 */ 3475 count = (PM_ISBC(dip)) ? 1 : PM_NUMCMPTS(dip); 3476 if (count && pdip && !PM_WANTS_NOTIFICATION(pdip)) 3477 e_pm_hold_rele_power(pdip, count); 3478 3479 pm_set_pm_info(dip, info); 3480 /* 3481 * Apply any recorded thresholds 3482 */ 3483 (void) pm_thresh_specd(dip); 3484 3485 /* 3486 * Do dependency processing. 3487 */ 3488 pathbuf = kmem_zalloc(MAXPATHLEN, KM_SLEEP); 3489 (void) ddi_pathname(dip, pathbuf); 3490 pm_dispatch_to_dep_thread(PM_DEP_WK_ATTACH, pathbuf, pathbuf, 3491 PM_DEP_NOWAIT, NULL, 0); 3492 kmem_free(pathbuf, MAXPATHLEN); 3493 3494 if (!PM_ISBC(dip)) { 3495 mutex_enter(&pm_scan_lock); 3496 if (autopm_enabled) { 3497 pm_scan_init(dip); 3498 mutex_exit(&pm_scan_lock); 3499 pm_rescan(dip); 3500 } else { 3501 mutex_exit(&pm_scan_lock); 3502 } 3503 } 3504 return (0); 3505 } 3506 3507 /* 3508 * This is the obsolete exported interface for a driver to find out its 3509 * "normal" (max) power. 3510 * We only get components destroyed while no power management is 3511 * going on (and the device is detached), so we don't need a mutex here 3512 */ 3513 int 3514 pm_get_normal_power(dev_info_t *dip, int comp) 3515 { 3516 3517 if (comp >= 0 && comp < PM_NUMCMPTS(dip)) { 3518 return (PM_CP(dip, comp)->pmc_norm_pwr); 3519 } 3520 return (DDI_FAILURE); 3521 } 3522 3523 /* 3524 * Fetches the current power level. Return DDI_SUCCESS or DDI_FAILURE. 3525 */ 3526 int 3527 pm_get_current_power(dev_info_t *dip, int comp, int *levelp) 3528 { 3529 if (comp >= 0 && comp < PM_NUMCMPTS(dip)) { 3530 *levelp = PM_CURPOWER(dip, comp); 3531 return (DDI_SUCCESS); 3532 } 3533 return (DDI_FAILURE); 3534 } 3535 3536 /* 3537 * Returns current threshold of indicated component 3538 */ 3539 static int 3540 cur_threshold(dev_info_t *dip, int comp) 3541 { 3542 pm_component_t *cp = PM_CP(dip, comp); 3543 int pwr; 3544 3545 if (PM_ISBC(dip)) { 3546 /* 3547 * backwards compatible nodes only have one threshold 3548 */ 3549 return (cp->pmc_comp.pmc_thresh[1]); 3550 } 3551 pwr = cp->pmc_cur_pwr; 3552 if (pwr == PM_LEVEL_UNKNOWN) { 3553 int thresh; 3554 if (DEVI(dip)->devi_pm_flags & PMC_NEXDEF_THRESH) 3555 thresh = pm_default_nexus_threshold; 3556 else 3557 thresh = pm_system_idle_threshold; 3558 return (thresh); 3559 } 3560 ASSERT(cp->pmc_comp.pmc_thresh); 3561 return (cp->pmc_comp.pmc_thresh[pwr]); 3562 } 3563 3564 /* 3565 * Compute next lower component power level given power index. 3566 */ 3567 static int 3568 pm_next_lower_power(pm_component_t *cp, int pwrndx) 3569 { 3570 int nxt_pwr; 3571 3572 if (pwrndx == PM_LEVEL_UNKNOWN) { 3573 nxt_pwr = cp->pmc_comp.pmc_lvals[0]; 3574 } else { 3575 pwrndx--; 3576 ASSERT(pwrndx >= 0); 3577 nxt_pwr = cp->pmc_comp.pmc_lvals[pwrndx]; 3578 } 3579 return (nxt_pwr); 3580 } 3581 3582 /* 3583 * Bring all components of device to normal power 3584 */ 3585 int 3586 pm_all_to_normal(dev_info_t *dip, pm_canblock_t canblock) 3587 { 3588 PMD_FUNC(pmf, "all_to_normal") 3589 int *normal; 3590 int i, ncomps, result; 3591 size_t size; 3592 int changefailed = 0; 3593 3594 PMD(PMD_ALLNORM, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 3595 ASSERT(PM_GET_PM_INFO(dip)); 3596 if (pm_get_norm_pwrs(dip, &normal, &size) != DDI_SUCCESS) { 3597 PMD(PMD_ALLNORM, ("%s: can't get norm pwrs for " 3598 "%s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 3599 return (DDI_FAILURE); 3600 } 3601 ncomps = PM_NUMCMPTS(dip); 3602 for (i = 0; i < ncomps; i++) { 3603 if (pm_set_power(dip, i, normal[i], 3604 PM_LEVEL_UPONLY, canblock, 0, &result) != DDI_SUCCESS) { 3605 changefailed++; 3606 PMD(PMD_ALLNORM | PMD_FAIL, ("%s: failed to set " 3607 "%s@%s(%s#%d)[%d] to %d, errno %d\n", pmf, 3608 PM_DEVICE(dip), i, normal[i], result)) 3609 } 3610 } 3611 kmem_free(normal, size); 3612 if (changefailed) { 3613 PMD(PMD_FAIL, ("%s: failed to set %d comps %s@%s(%s#%d) " 3614 "to full power\n", pmf, changefailed, PM_DEVICE(dip))) 3615 return (DDI_FAILURE); 3616 } 3617 return (DDI_SUCCESS); 3618 } 3619 3620 /* 3621 * Returns true if all components of device are at normal power 3622 */ 3623 int 3624 pm_all_at_normal(dev_info_t *dip) 3625 { 3626 PMD_FUNC(pmf, "all_at_normal") 3627 int *normal; 3628 int i; 3629 size_t size; 3630 3631 PMD(PMD_ALLNORM, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 3632 if (pm_get_norm_pwrs(dip, &normal, &size) != DDI_SUCCESS) { 3633 PMD(PMD_ALLNORM, ("%s: can't get normal power\n", pmf)) 3634 return (DDI_FAILURE); 3635 } 3636 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 3637 int current = PM_CURPOWER(dip, i); 3638 if (normal[i] > current) { 3639 PMD(PMD_ALLNORM, ("%s: %s@%s(%s#%d) comp=%d, " 3640 "norm=%d, cur=%d\n", pmf, PM_DEVICE(dip), i, 3641 normal[i], current)) 3642 break; 3643 } 3644 } 3645 kmem_free(normal, size); 3646 if (i != PM_NUMCMPTS(dip)) { 3647 return (0); 3648 } 3649 return (1); 3650 } 3651 3652 static void 3653 bring_wekeeps_up(char *keeper) 3654 { 3655 PMD_FUNC(pmf, "bring_wekeeps_up") 3656 int i; 3657 pm_pdr_t *dp; 3658 pm_info_t *wku_info; 3659 char *kept_path; 3660 dev_info_t *kept; 3661 static void bring_pmdep_up(dev_info_t *, int); 3662 3663 if (panicstr) { 3664 return; 3665 } 3666 /* 3667 * We process the request even if the keeper detaches because 3668 * detach processing expects this to increment kidsupcnt of kept. 3669 */ 3670 PMD(PMD_BRING, ("%s: keeper= %s\n", pmf, keeper)) 3671 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 3672 if (strcmp(dp->pdr_keeper, keeper) != 0) 3673 continue; 3674 for (i = 0; i < dp->pdr_kept_count; i++) { 3675 kept_path = dp->pdr_kept_paths[i]; 3676 if (kept_path == NULL) 3677 continue; 3678 ASSERT(kept_path[0] != '\0'); 3679 if ((kept = pm_name_to_dip(kept_path, 1)) == NULL) 3680 continue; 3681 wku_info = PM_GET_PM_INFO(kept); 3682 if (wku_info == NULL) { 3683 if (kept) 3684 ddi_release_devi(kept); 3685 continue; 3686 } 3687 /* 3688 * Don't mess with it if it is being detached, it isn't 3689 * safe to call its power entry point 3690 */ 3691 if (wku_info->pmi_dev_pm_state & PM_DETACHING) { 3692 if (kept) 3693 ddi_release_devi(kept); 3694 continue; 3695 } 3696 bring_pmdep_up(kept, 1); 3697 ddi_release_devi(kept); 3698 } 3699 } 3700 } 3701 3702 /* 3703 * Bring up the 'kept' device passed as argument 3704 */ 3705 static void 3706 bring_pmdep_up(dev_info_t *kept_dip, int hold) 3707 { 3708 PMD_FUNC(pmf, "bring_pmdep_up") 3709 int is_all_at_normal = 0; 3710 3711 /* 3712 * If the kept device has been unmanaged, do nothing. 3713 */ 3714 if (!PM_GET_PM_INFO(kept_dip)) 3715 return; 3716 3717 /* Just ignore DIRECT PM device till they are released. */ 3718 if (!pm_processes_stopped && PM_ISDIRECT(kept_dip) && 3719 !(is_all_at_normal = pm_all_at_normal(kept_dip))) { 3720 PMD(PMD_BRING, ("%s: can't bring up PM_DIRECT %s@%s(%s#%d) " 3721 "controlling process did something else\n", pmf, 3722 PM_DEVICE(kept_dip))) 3723 DEVI(kept_dip)->devi_pm_flags |= PMC_SKIP_BRINGUP; 3724 return; 3725 } 3726 /* if we got here the keeper had a transition from OFF->ON */ 3727 if (hold) 3728 pm_hold_power(kept_dip); 3729 3730 if (!is_all_at_normal) 3731 (void) pm_all_to_normal(kept_dip, PM_CANBLOCK_FAIL); 3732 } 3733 3734 /* 3735 * A bunch of stuff that belongs only to the next routine (or two) 3736 */ 3737 3738 static const char namestr[] = "NAME="; 3739 static const int nameln = sizeof (namestr) - 1; 3740 static const char pmcompstr[] = "pm-components"; 3741 3742 struct pm_comp_pkg { 3743 pm_comp_t *comp; 3744 struct pm_comp_pkg *next; 3745 }; 3746 3747 #define isdigit(ch) ((ch) >= '0' && (ch) <= '9') 3748 3749 #define isxdigit(ch) (isdigit(ch) || ((ch) >= 'a' && (ch) <= 'f') || \ 3750 ((ch) >= 'A' && (ch) <= 'F')) 3751 3752 /* 3753 * Rather than duplicate this code ... 3754 * (this code excerpted from the function that follows it) 3755 */ 3756 #define FINISH_COMP { \ 3757 ASSERT(compp); \ 3758 compp->pmc_lnames_sz = size; \ 3759 tp = compp->pmc_lname_buf = kmem_alloc(size, KM_SLEEP); \ 3760 compp->pmc_numlevels = level; \ 3761 compp->pmc_lnames = kmem_alloc(level * sizeof (char *), KM_SLEEP); \ 3762 compp->pmc_lvals = kmem_alloc(level * sizeof (int), KM_SLEEP); \ 3763 compp->pmc_thresh = kmem_alloc(level * sizeof (int), KM_SLEEP); \ 3764 /* copy string out of prop array into buffer */ \ 3765 for (j = 0; j < level; j++) { \ 3766 compp->pmc_thresh[j] = INT_MAX; /* only [0] sticks */ \ 3767 compp->pmc_lvals[j] = lvals[j]; \ 3768 (void) strcpy(tp, lnames[j]); \ 3769 compp->pmc_lnames[j] = tp; \ 3770 tp += lszs[j]; \ 3771 } \ 3772 ASSERT(tp > compp->pmc_lname_buf && tp <= \ 3773 compp->pmc_lname_buf + compp->pmc_lnames_sz); \ 3774 } 3775 3776 /* 3777 * Create (empty) component data structures. 3778 */ 3779 static void 3780 e_pm_create_components(dev_info_t *dip, int num_components) 3781 { 3782 struct pm_component *compp, *ocompp; 3783 int i, size = 0; 3784 3785 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 3786 ASSERT(!DEVI(dip)->devi_pm_components); 3787 ASSERT(!(DEVI(dip)->devi_pm_flags & PMC_COMPONENTS_DONE)); 3788 size = sizeof (struct pm_component) * num_components; 3789 3790 compp = kmem_zalloc(size, KM_SLEEP); 3791 ocompp = compp; 3792 DEVI(dip)->devi_pm_comp_size = size; 3793 DEVI(dip)->devi_pm_num_components = num_components; 3794 PM_LOCK_BUSY(dip); 3795 for (i = 0; i < num_components; i++) { 3796 compp->pmc_timestamp = gethrestime_sec(); 3797 compp->pmc_norm_pwr = (uint_t)-1; 3798 compp++; 3799 } 3800 PM_UNLOCK_BUSY(dip); 3801 DEVI(dip)->devi_pm_components = ocompp; 3802 DEVI(dip)->devi_pm_flags |= PMC_COMPONENTS_DONE; 3803 } 3804 3805 /* 3806 * Parse hex or decimal value from char string 3807 */ 3808 static char * 3809 pm_parsenum(char *cp, int *valp) 3810 { 3811 int ch, offset; 3812 char numbuf[256]; 3813 char *np = numbuf; 3814 int value = 0; 3815 3816 ch = *cp++; 3817 if (isdigit(ch)) { 3818 if (ch == '0') { 3819 if ((ch = *cp++) == 'x' || ch == 'X') { 3820 ch = *cp++; 3821 while (isxdigit(ch)) { 3822 *np++ = (char)ch; 3823 ch = *cp++; 3824 } 3825 *np = 0; 3826 cp--; 3827 goto hexval; 3828 } else { 3829 goto digit; 3830 } 3831 } else { 3832 digit: 3833 while (isdigit(ch)) { 3834 *np++ = (char)ch; 3835 ch = *cp++; 3836 } 3837 *np = 0; 3838 cp--; 3839 goto decval; 3840 } 3841 } else 3842 return (NULL); 3843 3844 hexval: 3845 for (np = numbuf; *np; np++) { 3846 if (*np >= 'a' && *np <= 'f') 3847 offset = 'a' - 10; 3848 else if (*np >= 'A' && *np <= 'F') 3849 offset = 'A' - 10; 3850 else if (*np >= '0' && *np <= '9') 3851 offset = '0'; 3852 value *= 16; 3853 value += *np - offset; 3854 } 3855 *valp = value; 3856 return (cp); 3857 3858 decval: 3859 offset = '0'; 3860 for (np = numbuf; *np; np++) { 3861 value *= 10; 3862 value += *np - offset; 3863 } 3864 *valp = value; 3865 return (cp); 3866 } 3867 3868 /* 3869 * Set max (previously documented as "normal") power. 3870 */ 3871 static void 3872 e_pm_set_max_power(dev_info_t *dip, int component_number, int level) 3873 { 3874 PM_CP(dip, component_number)->pmc_norm_pwr = level; 3875 } 3876 3877 /* 3878 * Internal routine for destroying components 3879 * It is called even when there might not be any, so it must be forgiving. 3880 */ 3881 static void 3882 e_pm_destroy_components(dev_info_t *dip) 3883 { 3884 int i; 3885 struct pm_component *cp; 3886 3887 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 3888 if (PM_NUMCMPTS(dip) == 0) 3889 return; 3890 cp = DEVI(dip)->devi_pm_components; 3891 ASSERT(cp); 3892 for (i = 0; i < PM_NUMCMPTS(dip); i++, cp++) { 3893 int nlevels = cp->pmc_comp.pmc_numlevels; 3894 kmem_free(cp->pmc_comp.pmc_lvals, nlevels * sizeof (int)); 3895 kmem_free(cp->pmc_comp.pmc_thresh, nlevels * sizeof (int)); 3896 /* 3897 * For BC nodes, the rest is static in bc_comp, so skip it 3898 */ 3899 if (PM_ISBC(dip)) 3900 continue; 3901 kmem_free(cp->pmc_comp.pmc_name, cp->pmc_comp.pmc_name_sz); 3902 kmem_free(cp->pmc_comp.pmc_lnames, nlevels * sizeof (char *)); 3903 kmem_free(cp->pmc_comp.pmc_lname_buf, 3904 cp->pmc_comp.pmc_lnames_sz); 3905 } 3906 kmem_free(DEVI(dip)->devi_pm_components, DEVI(dip)->devi_pm_comp_size); 3907 DEVI(dip)->devi_pm_components = NULL; 3908 DEVI(dip)->devi_pm_num_components = 0; 3909 DEVI(dip)->devi_pm_flags &= 3910 ~(PMC_COMPONENTS_DONE | PMC_COMPONENTS_FAILED); 3911 } 3912 3913 /* 3914 * Read the pm-components property (if there is one) and use it to set up 3915 * components. Returns a pointer to an array of component structures if 3916 * pm-components found and successfully parsed, else returns NULL. 3917 * Sets error return *errp to true to indicate a failure (as opposed to no 3918 * property being present). 3919 */ 3920 pm_comp_t * 3921 pm_autoconfig(dev_info_t *dip, int *errp) 3922 { 3923 PMD_FUNC(pmf, "autoconfig") 3924 uint_t nelems; 3925 char **pp; 3926 pm_comp_t *compp = NULL; 3927 int i, j, level, components = 0; 3928 size_t size = 0; 3929 struct pm_comp_pkg *p, *ptail; 3930 struct pm_comp_pkg *phead = NULL; 3931 int *lvals = NULL; 3932 int *lszs = NULL; 3933 int *np = NULL; 3934 int npi = 0; 3935 char **lnames = NULL; 3936 char *cp, *tp; 3937 pm_comp_t *ret = NULL; 3938 3939 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 3940 *errp = 0; /* assume success */ 3941 if (ddi_prop_lookup_string_array(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS, 3942 (char *)pmcompstr, &pp, &nelems) != DDI_PROP_SUCCESS) { 3943 return (NULL); 3944 } 3945 3946 if (nelems < 3) { /* need at least one name and two levels */ 3947 goto errout; 3948 } 3949 3950 /* 3951 * pm_create_components is no longer allowed 3952 */ 3953 if (PM_NUMCMPTS(dip) != 0) { 3954 PMD(PMD_ERROR, ("%s: %s@%s(%s#%d) has %d comps\n", 3955 pmf, PM_DEVICE(dip), PM_NUMCMPTS(dip))) 3956 goto errout; 3957 } 3958 3959 lvals = kmem_alloc(nelems * sizeof (int), KM_SLEEP); 3960 lszs = kmem_alloc(nelems * sizeof (int), KM_SLEEP); 3961 lnames = kmem_alloc(nelems * sizeof (char *), KM_SLEEP); 3962 np = kmem_alloc(nelems * sizeof (int), KM_SLEEP); 3963 3964 level = 0; 3965 phead = NULL; 3966 for (i = 0; i < nelems; i++) { 3967 cp = pp[i]; 3968 if (!isdigit(*cp)) { /* must be name */ 3969 if (strncmp(cp, namestr, nameln) != 0) { 3970 goto errout; 3971 } 3972 if (i != 0) { 3973 if (level == 0) { /* no level spec'd */ 3974 PMD(PMD_ERROR, ("%s: no level spec'd\n", 3975 pmf)) 3976 goto errout; 3977 } 3978 np[npi++] = lvals[level - 1]; 3979 /* finish up previous component levels */ 3980 FINISH_COMP; 3981 } 3982 cp += nameln; 3983 if (!*cp) { 3984 PMD(PMD_ERROR, ("%s: nsa\n", pmf)) 3985 goto errout; 3986 } 3987 p = kmem_zalloc(sizeof (*phead), KM_SLEEP); 3988 if (phead == NULL) { 3989 phead = ptail = p; 3990 } else { 3991 ptail->next = p; 3992 ptail = p; 3993 } 3994 compp = p->comp = kmem_zalloc(sizeof (pm_comp_t), 3995 KM_SLEEP); 3996 compp->pmc_name_sz = strlen(cp) + 1; 3997 compp->pmc_name = kmem_zalloc(compp->pmc_name_sz, 3998 KM_SLEEP); 3999 (void) strncpy(compp->pmc_name, cp, compp->pmc_name_sz); 4000 components++; 4001 level = 0; 4002 } else { /* better be power level <num>=<name> */ 4003 #ifdef DEBUG 4004 tp = cp; 4005 #endif 4006 if (i == 0 || 4007 (cp = pm_parsenum(cp, &lvals[level])) == NULL) { 4008 PMD(PMD_ERROR, ("%s: parsenum(%s)\n", pmf, tp)) 4009 goto errout; 4010 } 4011 #ifdef DEBUG 4012 tp = cp; 4013 #endif 4014 if (*cp++ != '=' || !*cp) { 4015 PMD(PMD_ERROR, ("%s: ex =, got %s\n", pmf, tp)) 4016 goto errout; 4017 } 4018 4019 lszs[level] = strlen(cp) + 1; 4020 size += lszs[level]; 4021 lnames[level] = cp; /* points into prop string */ 4022 level++; 4023 } 4024 } 4025 np[npi++] = lvals[level - 1]; 4026 if (level == 0) { /* ended with a name */ 4027 PMD(PMD_ERROR, ("%s: ewn\n", pmf)) 4028 goto errout; 4029 } 4030 FINISH_COMP; 4031 4032 4033 /* 4034 * Now we have a list of components--we have to return instead an 4035 * array of them, but we can just copy the top level and leave 4036 * the rest as is 4037 */ 4038 (void) e_pm_create_components(dip, components); 4039 for (i = 0; i < components; i++) 4040 e_pm_set_max_power(dip, i, np[i]); 4041 4042 ret = kmem_zalloc(components * sizeof (pm_comp_t), KM_SLEEP); 4043 for (i = 0, p = phead; i < components; i++) { 4044 ASSERT(p); 4045 /* 4046 * Now sanity-check values: levels must be monotonically 4047 * increasing 4048 */ 4049 if (p->comp->pmc_numlevels < 2) { 4050 PMD(PMD_ERROR, ("%s: comp %s of %s@%s(%s#%d) only %d " 4051 "levels\n", pmf, 4052 p->comp->pmc_name, PM_DEVICE(dip), 4053 p->comp->pmc_numlevels)) 4054 goto errout; 4055 } 4056 for (j = 0; j < p->comp->pmc_numlevels; j++) { 4057 if ((p->comp->pmc_lvals[j] < 0) || ((j > 0) && 4058 (p->comp->pmc_lvals[j] <= 4059 p->comp->pmc_lvals[j - 1]))) { 4060 PMD(PMD_ERROR, ("%s: comp %s of %s@%s(%s#%d) " 4061 "not mono. incr, %d follows %d\n", pmf, 4062 p->comp->pmc_name, PM_DEVICE(dip), 4063 p->comp->pmc_lvals[j], 4064 p->comp->pmc_lvals[j - 1])) 4065 goto errout; 4066 } 4067 } 4068 ret[i] = *p->comp; /* struct assignment */ 4069 for (j = 0; j < i; j++) { 4070 /* 4071 * Test for unique component names 4072 */ 4073 if (strcmp(ret[j].pmc_name, ret[i].pmc_name) == 0) { 4074 PMD(PMD_ERROR, ("%s: %s of %s@%s(%s#%d) not " 4075 "unique\n", pmf, ret[j].pmc_name, 4076 PM_DEVICE(dip))) 4077 goto errout; 4078 } 4079 } 4080 ptail = p; 4081 p = p->next; 4082 phead = p; /* errout depends on phead making sense */ 4083 kmem_free(ptail->comp, sizeof (*ptail->comp)); 4084 kmem_free(ptail, sizeof (*ptail)); 4085 } 4086 out: 4087 ddi_prop_free(pp); 4088 if (lvals) 4089 kmem_free(lvals, nelems * sizeof (int)); 4090 if (lszs) 4091 kmem_free(lszs, nelems * sizeof (int)); 4092 if (lnames) 4093 kmem_free(lnames, nelems * sizeof (char *)); 4094 if (np) 4095 kmem_free(np, nelems * sizeof (int)); 4096 return (ret); 4097 4098 errout: 4099 e_pm_destroy_components(dip); 4100 *errp = 1; /* signal failure */ 4101 cmn_err(CE_CONT, "!pm: %s property ", pmcompstr); 4102 for (i = 0; i < nelems - 1; i++) 4103 cmn_err(CE_CONT, "!'%s', ", pp[i]); 4104 if (nelems != 0) 4105 cmn_err(CE_CONT, "!'%s'", pp[nelems - 1]); 4106 cmn_err(CE_CONT, "! for %s@%s(%s#%d) is ill-formed.\n", PM_DEVICE(dip)); 4107 for (p = phead; p; ) { 4108 pm_comp_t *pp; 4109 int n; 4110 4111 ptail = p; 4112 /* 4113 * Free component data structures 4114 */ 4115 pp = p->comp; 4116 n = pp->pmc_numlevels; 4117 if (pp->pmc_name_sz) { 4118 kmem_free(pp->pmc_name, pp->pmc_name_sz); 4119 } 4120 if (pp->pmc_lnames_sz) { 4121 kmem_free(pp->pmc_lname_buf, pp->pmc_lnames_sz); 4122 } 4123 if (pp->pmc_lnames) { 4124 kmem_free(pp->pmc_lnames, n * (sizeof (char *))); 4125 } 4126 if (pp->pmc_thresh) { 4127 kmem_free(pp->pmc_thresh, n * (sizeof (int))); 4128 } 4129 if (pp->pmc_lvals) { 4130 kmem_free(pp->pmc_lvals, n * (sizeof (int))); 4131 } 4132 p = ptail->next; 4133 kmem_free(ptail, sizeof (*ptail)); 4134 } 4135 if (ret != NULL) 4136 kmem_free(ret, components * sizeof (pm_comp_t)); 4137 ret = NULL; 4138 goto out; 4139 } 4140 4141 /* 4142 * Set threshold values for a devices components by dividing the target 4143 * threshold (base) by the number of transitions and assign each transition 4144 * that threshold. This will get the entire device down in the target time if 4145 * all components are idle and even if there are dependencies among components. 4146 * 4147 * Devices may well get powered all the way down before the target time, but 4148 * at least the EPA will be happy. 4149 */ 4150 void 4151 pm_set_device_threshold(dev_info_t *dip, int base, int flag) 4152 { 4153 PMD_FUNC(pmf, "set_device_threshold") 4154 int target_threshold = (base * 95) / 100; 4155 int level, comp; /* loop counters */ 4156 int transitions = 0; 4157 int ncomp = PM_NUMCMPTS(dip); 4158 int thresh; 4159 int remainder; 4160 pm_comp_t *pmc; 4161 int i, circ; 4162 4163 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 4164 PM_LOCK_DIP(dip); 4165 /* 4166 * First we handle the easy one. If we're setting the default 4167 * threshold for a node with children, then we set it to the 4168 * default nexus threshold (currently 0) and mark it as default 4169 * nexus threshold instead 4170 */ 4171 if (PM_IS_NEXUS(dip)) { 4172 if (flag == PMC_DEF_THRESH) { 4173 PMD(PMD_THRESH, ("%s: [%s@%s(%s#%d) NEXDEF]\n", pmf, 4174 PM_DEVICE(dip))) 4175 thresh = pm_default_nexus_threshold; 4176 for (comp = 0; comp < ncomp; comp++) { 4177 pmc = &PM_CP(dip, comp)->pmc_comp; 4178 for (level = 1; level < pmc->pmc_numlevels; 4179 level++) { 4180 pmc->pmc_thresh[level] = thresh; 4181 } 4182 } 4183 DEVI(dip)->devi_pm_dev_thresh = 4184 pm_default_nexus_threshold; 4185 /* 4186 * If the nexus node is being reconfigured back to 4187 * the default threshold, adjust the notlowest count. 4188 */ 4189 if (DEVI(dip)->devi_pm_flags & 4190 (PMC_DEV_THRESH|PMC_COMP_THRESH)) { 4191 PM_LOCK_POWER(dip, &circ); 4192 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 4193 if (PM_CURPOWER(dip, i) == 0) 4194 continue; 4195 mutex_enter(&pm_compcnt_lock); 4196 ASSERT(pm_comps_notlowest); 4197 pm_comps_notlowest--; 4198 PMD(PMD_LEVEL, ("%s: %s@%s(%s#%d) decr " 4199 "notlowest to %d\n", pmf, 4200 PM_DEVICE(dip), pm_comps_notlowest)) 4201 if (pm_comps_notlowest == 0) 4202 pm_ppm_notify_all_lowest(dip, 4203 PM_ALL_LOWEST); 4204 mutex_exit(&pm_compcnt_lock); 4205 } 4206 PM_UNLOCK_POWER(dip, circ); 4207 } 4208 DEVI(dip)->devi_pm_flags &= PMC_THRESH_NONE; 4209 DEVI(dip)->devi_pm_flags |= PMC_NEXDEF_THRESH; 4210 PM_UNLOCK_DIP(dip); 4211 return; 4212 } else if (DEVI(dip)->devi_pm_flags & PMC_NEXDEF_THRESH) { 4213 /* 4214 * If the nexus node is being configured for a 4215 * non-default threshold, include that node in 4216 * the notlowest accounting. 4217 */ 4218 PM_LOCK_POWER(dip, &circ); 4219 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 4220 if (PM_CURPOWER(dip, i) == 0) 4221 continue; 4222 mutex_enter(&pm_compcnt_lock); 4223 if (pm_comps_notlowest == 0) 4224 pm_ppm_notify_all_lowest(dip, 4225 PM_NOT_ALL_LOWEST); 4226 pm_comps_notlowest++; 4227 PMD(PMD_LEVEL, ("%s: %s@%s(%s#%d) incr " 4228 "notlowest to %d\n", pmf, 4229 PM_DEVICE(dip), pm_comps_notlowest)) 4230 mutex_exit(&pm_compcnt_lock); 4231 } 4232 PM_UNLOCK_POWER(dip, circ); 4233 } 4234 } 4235 /* 4236 * Compute the total number of transitions for all components 4237 * of the device. Distribute the threshold evenly over them 4238 */ 4239 for (comp = 0; comp < ncomp; comp++) { 4240 pmc = &PM_CP(dip, comp)->pmc_comp; 4241 ASSERT(pmc->pmc_numlevels > 1); 4242 transitions += pmc->pmc_numlevels - 1; 4243 } 4244 ASSERT(transitions); 4245 thresh = target_threshold / transitions; 4246 4247 for (comp = 0; comp < ncomp; comp++) { 4248 pmc = &PM_CP(dip, comp)->pmc_comp; 4249 for (level = 1; level < pmc->pmc_numlevels; level++) { 4250 pmc->pmc_thresh[level] = thresh; 4251 } 4252 } 4253 4254 #ifdef DEBUG 4255 for (comp = 0; comp < ncomp; comp++) { 4256 pmc = &PM_CP(dip, comp)->pmc_comp; 4257 for (level = 1; level < pmc->pmc_numlevels; level++) { 4258 PMD(PMD_THRESH, ("%s: thresh before %s@%s(%s#%d) " 4259 "comp=%d, level=%d, %d\n", pmf, PM_DEVICE(dip), 4260 comp, level, pmc->pmc_thresh[level])) 4261 } 4262 } 4263 #endif 4264 /* 4265 * Distribute any remainder till they are all gone 4266 */ 4267 remainder = target_threshold - thresh * transitions; 4268 level = 1; 4269 #ifdef DEBUG 4270 PMD(PMD_THRESH, ("%s: remainder=%d target_threshold=%d thresh=%d " 4271 "trans=%d\n", pmf, remainder, target_threshold, thresh, 4272 transitions)) 4273 #endif 4274 while (remainder > 0) { 4275 comp = 0; 4276 while (remainder && (comp < ncomp)) { 4277 pmc = &PM_CP(dip, comp)->pmc_comp; 4278 if (level < pmc->pmc_numlevels) { 4279 pmc->pmc_thresh[level] += 1; 4280 remainder--; 4281 } 4282 comp++; 4283 } 4284 level++; 4285 } 4286 #ifdef DEBUG 4287 for (comp = 0; comp < ncomp; comp++) { 4288 pmc = &PM_CP(dip, comp)->pmc_comp; 4289 for (level = 1; level < pmc->pmc_numlevels; level++) { 4290 PMD(PMD_THRESH, ("%s: thresh after %s@%s(%s#%d) " 4291 "comp=%d level=%d, %d\n", pmf, PM_DEVICE(dip), 4292 comp, level, pmc->pmc_thresh[level])) 4293 } 4294 } 4295 #endif 4296 ASSERT(PM_IAM_LOCKING_DIP(dip)); 4297 DEVI(dip)->devi_pm_dev_thresh = base; 4298 DEVI(dip)->devi_pm_flags &= PMC_THRESH_NONE; 4299 DEVI(dip)->devi_pm_flags |= flag; 4300 PM_UNLOCK_DIP(dip); 4301 } 4302 4303 /* 4304 * Called when there is no old-style platform power management driver 4305 */ 4306 static int 4307 ddi_no_platform_power(power_req_t *req) 4308 { 4309 _NOTE(ARGUNUSED(req)) 4310 return (DDI_FAILURE); 4311 } 4312 4313 /* 4314 * This function calls the entry point supplied by the platform-specific 4315 * pm driver to bring the device component 'pm_cmpt' to power level 'pm_level'. 4316 * The use of global for getting the function name from platform-specific 4317 * pm driver is not ideal, but it is simple and efficient. 4318 * The previous property lookup was being done in the idle loop on swift 4319 * systems without pmc chips and hurt deskbench performance as well as 4320 * violating scheduler locking rules 4321 */ 4322 int (*pm_platform_power)(power_req_t *) = ddi_no_platform_power; 4323 4324 /* 4325 * Old obsolete interface for a device to request a power change (but only 4326 * an increase in power) 4327 */ 4328 int 4329 ddi_dev_is_needed(dev_info_t *dip, int cmpt, int level) 4330 { 4331 return (pm_raise_power(dip, cmpt, level)); 4332 } 4333 4334 /* 4335 * The old obsolete interface to platform power management. Only used by 4336 * Gypsy platform and APM on X86. 4337 */ 4338 int 4339 ddi_power(dev_info_t *dip, int pm_cmpt, int pm_level) 4340 { 4341 power_req_t request; 4342 4343 request.request_type = PMR_SET_POWER; 4344 request.req.set_power_req.who = dip; 4345 request.req.set_power_req.cmpt = pm_cmpt; 4346 request.req.set_power_req.level = pm_level; 4347 return (ddi_ctlops(dip, dip, DDI_CTLOPS_POWER, &request, NULL)); 4348 } 4349 4350 /* 4351 * A driver can invoke this from its detach routine when DDI_SUSPEND is 4352 * passed. Returns true if subsequent processing could result in power being 4353 * removed from the device. The arg is not currently used because it is 4354 * implicit in the operation of cpr/DR. 4355 */ 4356 int 4357 ddi_removing_power(dev_info_t *dip) 4358 { 4359 _NOTE(ARGUNUSED(dip)) 4360 return (pm_powering_down); 4361 } 4362 4363 /* 4364 * Returns true if a device indicates that its parent handles suspend/resume 4365 * processing for it. 4366 */ 4367 int 4368 e_ddi_parental_suspend_resume(dev_info_t *dip) 4369 { 4370 return (DEVI(dip)->devi_pm_flags & PMC_PARENTAL_SR); 4371 } 4372 4373 /* 4374 * Called for devices which indicate that their parent does suspend/resume 4375 * handling for them 4376 */ 4377 int 4378 e_ddi_suspend(dev_info_t *dip, ddi_detach_cmd_t cmd) 4379 { 4380 power_req_t request; 4381 request.request_type = PMR_SUSPEND; 4382 request.req.suspend_req.who = dip; 4383 request.req.suspend_req.cmd = cmd; 4384 return (ddi_ctlops(dip, dip, DDI_CTLOPS_POWER, &request, NULL)); 4385 } 4386 4387 /* 4388 * Called for devices which indicate that their parent does suspend/resume 4389 * handling for them 4390 */ 4391 int 4392 e_ddi_resume(dev_info_t *dip, ddi_attach_cmd_t cmd) 4393 { 4394 power_req_t request; 4395 request.request_type = PMR_RESUME; 4396 request.req.resume_req.who = dip; 4397 request.req.resume_req.cmd = cmd; 4398 return (ddi_ctlops(dip, dip, DDI_CTLOPS_POWER, &request, NULL)); 4399 } 4400 4401 /* 4402 * Old obsolete exported interface for drivers to create components. 4403 * This is now handled by exporting the pm-components property. 4404 */ 4405 int 4406 pm_create_components(dev_info_t *dip, int num_components) 4407 { 4408 PMD_FUNC(pmf, "pm_create_components") 4409 4410 if (num_components < 1) 4411 return (DDI_FAILURE); 4412 4413 if (!DEVI_IS_ATTACHING(dip)) { 4414 return (DDI_FAILURE); 4415 } 4416 4417 /* don't need to lock dip because attach is single threaded */ 4418 if (DEVI(dip)->devi_pm_components) { 4419 PMD(PMD_ERROR, ("%s: %s@%s(%s#%d) already has %d\n", pmf, 4420 PM_DEVICE(dip), PM_NUMCMPTS(dip))) 4421 return (DDI_FAILURE); 4422 } 4423 e_pm_create_components(dip, num_components); 4424 DEVI(dip)->devi_pm_flags |= PMC_BC; 4425 e_pm_default_components(dip, num_components); 4426 return (DDI_SUCCESS); 4427 } 4428 4429 /* 4430 * Obsolete interface previously called by drivers to destroy their components 4431 * at detach time. This is now done automatically. However, we need to keep 4432 * this for the old drivers. 4433 */ 4434 void 4435 pm_destroy_components(dev_info_t *dip) 4436 { 4437 PMD_FUNC(pmf, "pm_destroy_components") 4438 dev_info_t *pdip = ddi_get_parent(dip); 4439 4440 PMD(PMD_REMDEV | PMD_KIDSUP, ("%s: %s@%s(%s#%d)\n", pmf, 4441 PM_DEVICE(dip))) 4442 ASSERT(DEVI_IS_DETACHING(dip)); 4443 #ifdef DEBUG 4444 if (!PM_ISBC(dip)) 4445 cmn_err(CE_WARN, "!driver exporting pm-components property " 4446 "(%s@%s) calls pm_destroy_components", PM_NAME(dip), 4447 PM_ADDR(dip)); 4448 #endif 4449 /* 4450 * We ignore this unless this is an old-style driver, except for 4451 * printing the message above 4452 */ 4453 if (PM_NUMCMPTS(dip) == 0 || !PM_ISBC(dip)) { 4454 PMD(PMD_REMDEV, ("%s: ignore %s@%s(%s#%d)\n", pmf, 4455 PM_DEVICE(dip))) 4456 return; 4457 } 4458 ASSERT(PM_GET_PM_INFO(dip)); 4459 4460 /* 4461 * pm_unmanage will clear info pointer later, after dealing with 4462 * dependencies 4463 */ 4464 ASSERT(!PM_GET_PM_SCAN(dip)); /* better be gone already */ 4465 /* 4466 * Now adjust parent's kidsupcnt. We check only comp 0. 4467 * Parents that get notification are not adjusted because their 4468 * kidsupcnt is always 0 (or 1 during probe and attach). 4469 */ 4470 if ((PM_CURPOWER(dip, 0) != 0) && pdip && !PM_WANTS_NOTIFICATION(pdip)) 4471 pm_rele_power(pdip); 4472 #ifdef DEBUG 4473 else { 4474 PMD(PMD_KIDSUP, ("%s: kuc stays %s@%s(%s#%d) comps gone\n", 4475 pmf, PM_DEVICE(dip))) 4476 } 4477 #endif 4478 e_pm_destroy_components(dip); 4479 /* 4480 * Forget we ever knew anything about the components of this device 4481 */ 4482 DEVI(dip)->devi_pm_flags &= 4483 ~(PMC_BC | PMC_COMPONENTS_DONE | PMC_COMPONENTS_FAILED); 4484 } 4485 4486 /* 4487 * Exported interface for a driver to set a component busy. 4488 */ 4489 int 4490 pm_busy_component(dev_info_t *dip, int cmpt) 4491 { 4492 struct pm_component *cp; 4493 4494 ASSERT(dip != NULL); 4495 if (!e_pm_valid_info(dip, NULL) || !e_pm_valid_comp(dip, cmpt, &cp)) 4496 return (DDI_FAILURE); 4497 PM_LOCK_BUSY(dip); 4498 cp->pmc_busycount++; 4499 cp->pmc_timestamp = 0; 4500 PM_UNLOCK_BUSY(dip); 4501 return (DDI_SUCCESS); 4502 } 4503 4504 /* 4505 * Exported interface for a driver to set a component idle. 4506 */ 4507 int 4508 pm_idle_component(dev_info_t *dip, int cmpt) 4509 { 4510 PMD_FUNC(pmf, "pm_idle_component") 4511 struct pm_component *cp; 4512 pm_scan_t *scanp = PM_GET_PM_SCAN(dip); 4513 4514 if (!e_pm_valid_info(dip, NULL) || !e_pm_valid_comp(dip, cmpt, &cp)) 4515 return (DDI_FAILURE); 4516 4517 PM_LOCK_BUSY(dip); 4518 if (cp->pmc_busycount) { 4519 if (--(cp->pmc_busycount) == 0) 4520 cp->pmc_timestamp = gethrestime_sec(); 4521 } else { 4522 cp->pmc_timestamp = gethrestime_sec(); 4523 } 4524 4525 PM_UNLOCK_BUSY(dip); 4526 4527 /* 4528 * if device becomes idle during idle down period, try scan it down 4529 */ 4530 if (scanp && PM_IS_PID(dip)) { 4531 PMD(PMD_IDLEDOWN, ("%s: %s@%s(%s#%d) idle.\n", pmf, 4532 PM_DEVICE(dip))) 4533 pm_rescan(dip); 4534 return (DDI_SUCCESS); 4535 } 4536 4537 /* 4538 * handle scan not running with nexus threshold == 0 4539 */ 4540 4541 if (PM_IS_NEXUS(dip) && (cp->pmc_busycount == 0)) { 4542 pm_rescan(dip); 4543 } 4544 4545 return (DDI_SUCCESS); 4546 } 4547 4548 /* 4549 * This is the old obsolete interface called by drivers to set their normal 4550 * power. Thus we can't fix its behavior or return a value. 4551 * This functionality is replaced by the pm-component property. 4552 * We'll only get components destroyed while no power management is 4553 * going on (and the device is detached), so we don't need a mutex here 4554 */ 4555 void 4556 pm_set_normal_power(dev_info_t *dip, int comp, int level) 4557 { 4558 PMD_FUNC(pmf, "set_normal_power") 4559 #ifdef DEBUG 4560 if (!PM_ISBC(dip)) 4561 cmn_err(CE_WARN, "!call to pm_set_normal_power() by %s@%s " 4562 "(driver exporting pm-components property) ignored", 4563 PM_NAME(dip), PM_ADDR(dip)); 4564 #endif 4565 if (PM_ISBC(dip)) { 4566 PMD(PMD_NORM, ("%s: %s@%s(%s#%d) set normal power comp=%d, " 4567 "level=%d\n", pmf, PM_DEVICE(dip), comp, level)) 4568 e_pm_set_max_power(dip, comp, level); 4569 e_pm_default_levels(dip, PM_CP(dip, comp), level); 4570 } 4571 } 4572 4573 /* 4574 * Called on a successfully detached driver to free pm resources 4575 */ 4576 static void 4577 pm_stop(dev_info_t *dip) 4578 { 4579 PMD_FUNC(pmf, "stop") 4580 dev_info_t *pdip = ddi_get_parent(dip); 4581 4582 ASSERT(!PM_IAM_LOCKING_DIP(dip)); 4583 /* stopping scan, destroy scan data structure */ 4584 if (!PM_ISBC(dip)) { 4585 pm_scan_stop(dip); 4586 pm_scan_fini(dip); 4587 } 4588 4589 if (PM_GET_PM_INFO(dip) != NULL) { 4590 if (pm_unmanage(dip) == DDI_SUCCESS) { 4591 /* 4592 * Old style driver may have called 4593 * pm_destroy_components already, but just in case ... 4594 */ 4595 e_pm_destroy_components(dip); 4596 } else { 4597 PMD(PMD_FAIL, ("%s: can't pm_unmanage %s@%s(%s#%d)\n", 4598 pmf, PM_DEVICE(dip))) 4599 } 4600 } else { 4601 if (PM_NUMCMPTS(dip)) 4602 e_pm_destroy_components(dip); 4603 else { 4604 if (DEVI(dip)->devi_pm_flags & PMC_NOPMKID) { 4605 DEVI(dip)->devi_pm_flags &= ~PMC_NOPMKID; 4606 if (pdip && !PM_WANTS_NOTIFICATION(pdip)) { 4607 pm_rele_power(pdip); 4608 } else if (pdip && MDI_VHCI(pdip)) { 4609 (void) mdi_power(pdip, 4610 MDI_PM_RELE_POWER, 4611 (void *)dip, NULL, 0); 4612 } 4613 } 4614 } 4615 } 4616 } 4617 4618 /* 4619 * The node is the subject of a reparse pm props ioctl. Throw away the old 4620 * info and start over. 4621 */ 4622 int 4623 e_new_pm_props(dev_info_t *dip) 4624 { 4625 if (PM_GET_PM_INFO(dip) != NULL) { 4626 pm_stop(dip); 4627 4628 if (e_pm_manage(dip, PM_STYLE_NEW) != DDI_SUCCESS) { 4629 return (DDI_FAILURE); 4630 } 4631 } 4632 e_pm_props(dip); 4633 return (DDI_SUCCESS); 4634 } 4635 4636 /* 4637 * Device has been attached, so process its pm properties 4638 */ 4639 void 4640 e_pm_props(dev_info_t *dip) 4641 { 4642 char *pp; 4643 int len; 4644 int flags = 0; 4645 int propflag = DDI_PROP_DONTPASS|DDI_PROP_CANSLEEP; 4646 4647 /* 4648 * It doesn't matter if we do this more than once, we should always 4649 * get the same answers, and if not, then the last one in is the 4650 * best one. 4651 */ 4652 if (ddi_getlongprop(DDI_DEV_T_ANY, dip, propflag, "pm-hardware-state", 4653 (caddr_t)&pp, &len) == DDI_PROP_SUCCESS) { 4654 if (strcmp(pp, "needs-suspend-resume") == 0) { 4655 flags = PMC_NEEDS_SR; 4656 } else if (strcmp(pp, "no-suspend-resume") == 0) { 4657 flags = PMC_NO_SR; 4658 } else if (strcmp(pp, "parental-suspend-resume") == 0) { 4659 flags = PMC_PARENTAL_SR; 4660 } else { 4661 cmn_err(CE_NOTE, "!device %s@%s has unrecognized " 4662 "%s property value '%s'", PM_NAME(dip), 4663 PM_ADDR(dip), "pm-hardware-state", pp); 4664 } 4665 kmem_free(pp, len); 4666 } 4667 /* 4668 * This next segment (PMC_WANTS_NOTIFY) is in 4669 * support of nexus drivers which will want to be involved in 4670 * (or at least notified of) their child node's power level transitions. 4671 * "pm-want-child-notification?" is defined by the parent. 4672 */ 4673 if (ddi_prop_exists(DDI_DEV_T_ANY, dip, propflag, 4674 "pm-want-child-notification?") && PM_HAS_BUS_POWER(dip)) 4675 flags |= PMC_WANTS_NOTIFY; 4676 ASSERT(PM_HAS_BUS_POWER(dip) || !ddi_prop_exists(DDI_DEV_T_ANY, 4677 dip, propflag, "pm-want-child-notification?")); 4678 if (ddi_prop_exists(DDI_DEV_T_ANY, dip, propflag, 4679 "no-involuntary-power-cycles")) 4680 flags |= PMC_NO_INVOL; 4681 /* devfs single threads us */ 4682 DEVI(dip)->devi_pm_flags |= flags; 4683 } 4684 4685 /* 4686 * This is the DDI_CTLOPS_POWER handler that is used when there is no ppm 4687 * driver which has claimed a node. 4688 * Sets old_power in arg struct. 4689 */ 4690 static int 4691 pm_default_ctlops(dev_info_t *dip, dev_info_t *rdip, 4692 ddi_ctl_enum_t ctlop, void *arg, void *result) 4693 { 4694 _NOTE(ARGUNUSED(dip)) 4695 PMD_FUNC(pmf, "ctlops") 4696 power_req_t *reqp = (power_req_t *)arg; 4697 int retval; 4698 dev_info_t *target_dip; 4699 int new_level, old_level, cmpt; 4700 #ifdef DEBUG 4701 char *format; 4702 #endif 4703 4704 /* 4705 * The interface for doing the actual power level changes is now 4706 * through the DDI_CTLOPS_POWER bus_ctl, so that we can plug in 4707 * different platform-specific power control drivers. 4708 * 4709 * This driver implements the "default" version of this interface. 4710 * If no ppm driver has been installed then this interface is called 4711 * instead. 4712 */ 4713 ASSERT(dip == NULL); 4714 switch (ctlop) { 4715 case DDI_CTLOPS_POWER: 4716 switch (reqp->request_type) { 4717 case PMR_PPM_SET_POWER: 4718 { 4719 target_dip = reqp->req.ppm_set_power_req.who; 4720 ASSERT(target_dip == rdip); 4721 new_level = reqp->req.ppm_set_power_req.new_level; 4722 cmpt = reqp->req.ppm_set_power_req.cmpt; 4723 /* pass back old power for the PM_LEVEL_UNKNOWN case */ 4724 old_level = PM_CURPOWER(target_dip, cmpt); 4725 reqp->req.ppm_set_power_req.old_level = old_level; 4726 retval = pm_power(target_dip, cmpt, new_level); 4727 PMD(PMD_PPM, ("%s: PPM_SET_POWER %s@%s(%s#%d)[%d] %d->" 4728 "%d %s\n", pmf, PM_DEVICE(target_dip), cmpt, 4729 old_level, new_level, (retval == DDI_SUCCESS ? 4730 "chd" : "no chg"))) 4731 return (retval); 4732 } 4733 4734 case PMR_PPM_PRE_DETACH: 4735 case PMR_PPM_POST_DETACH: 4736 case PMR_PPM_PRE_ATTACH: 4737 case PMR_PPM_POST_ATTACH: 4738 case PMR_PPM_PRE_PROBE: 4739 case PMR_PPM_POST_PROBE: 4740 case PMR_PPM_PRE_RESUME: 4741 case PMR_PPM_INIT_CHILD: 4742 case PMR_PPM_UNINIT_CHILD: 4743 #ifdef DEBUG 4744 switch (reqp->request_type) { 4745 case PMR_PPM_PRE_DETACH: 4746 format = "%s: PMR_PPM_PRE_DETACH " 4747 "%s@%s(%s#%d)\n"; 4748 break; 4749 case PMR_PPM_POST_DETACH: 4750 format = "%s: PMR_PPM_POST_DETACH " 4751 "%s@%s(%s#%d) rets %d\n"; 4752 break; 4753 case PMR_PPM_PRE_ATTACH: 4754 format = "%s: PMR_PPM_PRE_ATTACH " 4755 "%s@%s(%s#%d)\n"; 4756 break; 4757 case PMR_PPM_POST_ATTACH: 4758 format = "%s: PMR_PPM_POST_ATTACH " 4759 "%s@%s(%s#%d) rets %d\n"; 4760 break; 4761 case PMR_PPM_PRE_PROBE: 4762 format = "%s: PMR_PPM_PRE_PROBE " 4763 "%s@%s(%s#%d)\n"; 4764 break; 4765 case PMR_PPM_POST_PROBE: 4766 format = "%s: PMR_PPM_POST_PROBE " 4767 "%s@%s(%s#%d) rets %d\n"; 4768 break; 4769 case PMR_PPM_PRE_RESUME: 4770 format = "%s: PMR_PPM_PRE_RESUME " 4771 "%s@%s(%s#%d) rets %d\n"; 4772 break; 4773 case PMR_PPM_INIT_CHILD: 4774 format = "%s: PMR_PPM_INIT_CHILD " 4775 "%s@%s(%s#%d)\n"; 4776 break; 4777 case PMR_PPM_UNINIT_CHILD: 4778 format = "%s: PMR_PPM_UNINIT_CHILD " 4779 "%s@%s(%s#%d)\n"; 4780 break; 4781 default: 4782 break; 4783 } 4784 PMD(PMD_PPM, (format, pmf, PM_DEVICE(rdip), 4785 reqp->req.ppm_config_req.result)) 4786 #endif 4787 return (DDI_SUCCESS); 4788 4789 case PMR_PPM_POWER_CHANGE_NOTIFY: 4790 /* 4791 * Nothing for us to do 4792 */ 4793 ASSERT(reqp->req.ppm_notify_level_req.who == rdip); 4794 PMD(PMD_PPM, ("%s: PMR_PPM_POWER_CHANGE_NOTIFY " 4795 "%s@%s(%s#%d)[%d] %d->%d\n", pmf, 4796 PM_DEVICE(reqp->req.ppm_notify_level_req.who), 4797 reqp->req.ppm_notify_level_req.cmpt, 4798 PM_CURPOWER(reqp->req.ppm_notify_level_req.who, 4799 reqp->req.ppm_notify_level_req.cmpt), 4800 reqp->req.ppm_notify_level_req.new_level)) 4801 return (DDI_SUCCESS); 4802 4803 case PMR_PPM_UNMANAGE: 4804 PMD(PMD_PPM, ("%s: PMR_PPM_UNMANAGE %s@%s(%s#%d)\n", 4805 pmf, PM_DEVICE(rdip))) 4806 return (DDI_SUCCESS); 4807 4808 case PMR_PPM_LOCK_POWER: 4809 pm_lock_power_single(reqp->req.ppm_lock_power_req.who, 4810 reqp->req.ppm_lock_power_req.circp); 4811 return (DDI_SUCCESS); 4812 4813 case PMR_PPM_UNLOCK_POWER: 4814 pm_unlock_power_single( 4815 reqp->req.ppm_unlock_power_req.who, 4816 reqp->req.ppm_unlock_power_req.circ); 4817 return (DDI_SUCCESS); 4818 4819 case PMR_PPM_TRY_LOCK_POWER: 4820 *(int *)result = pm_try_locking_power_single( 4821 reqp->req.ppm_lock_power_req.who, 4822 reqp->req.ppm_lock_power_req.circp); 4823 return (DDI_SUCCESS); 4824 4825 case PMR_PPM_POWER_LOCK_OWNER: 4826 target_dip = reqp->req.ppm_power_lock_owner_req.who; 4827 ASSERT(target_dip == rdip); 4828 reqp->req.ppm_power_lock_owner_req.owner = 4829 DEVI(rdip)->devi_busy_thread; 4830 return (DDI_SUCCESS); 4831 default: 4832 PMD(PMD_ERROR, ("%s: default!\n", pmf)) 4833 return (DDI_FAILURE); 4834 } 4835 4836 default: 4837 PMD(PMD_ERROR, ("%s: unknown\n", pmf)) 4838 return (DDI_FAILURE); 4839 } 4840 } 4841 4842 /* 4843 * We overload the bus_ctl ops here--perhaps we ought to have a distinct 4844 * power_ops struct for this functionality instead? 4845 * However, we only ever do this on a ppm driver. 4846 */ 4847 int 4848 pm_ctlops(dev_info_t *d, dev_info_t *r, ddi_ctl_enum_t op, void *a, void *v) 4849 { 4850 int (*fp)(); 4851 4852 /* if no ppm handler, call the default routine */ 4853 if (d == NULL) { 4854 return (pm_default_ctlops(d, r, op, a, v)); 4855 } 4856 if (!d || !r) 4857 return (DDI_FAILURE); 4858 ASSERT(DEVI(d)->devi_ops && DEVI(d)->devi_ops->devo_bus_ops && 4859 DEVI(d)->devi_ops->devo_bus_ops->bus_ctl); 4860 4861 fp = DEVI(d)->devi_ops->devo_bus_ops->bus_ctl; 4862 return ((*fp)(d, r, op, a, v)); 4863 } 4864 4865 /* 4866 * Called on a node when attach completes or the driver makes its first pm 4867 * call (whichever comes first). 4868 * In the attach case, device may not be power manageable at all. 4869 * Don't need to lock the dip because we're single threaded by the devfs code 4870 */ 4871 static int 4872 pm_start(dev_info_t *dip) 4873 { 4874 PMD_FUNC(pmf, "start") 4875 int ret; 4876 dev_info_t *pdip = ddi_get_parent(dip); 4877 int e_pm_manage(dev_info_t *, int); 4878 void pm_noinvol_specd(dev_info_t *dip); 4879 4880 e_pm_props(dip); 4881 pm_noinvol_specd(dip); 4882 /* 4883 * If this dip has already been processed, don't mess with it 4884 * (but decrement the speculative count we did above, as whatever 4885 * code put it under pm already will have dealt with it) 4886 */ 4887 if (PM_GET_PM_INFO(dip)) { 4888 PMD(PMD_KIDSUP, ("%s: pm already done for %s@%s(%s#%d)\n", 4889 pmf, PM_DEVICE(dip))) 4890 return (0); 4891 } 4892 ret = e_pm_manage(dip, PM_STYLE_UNKNOWN); 4893 4894 if (PM_GET_PM_INFO(dip) == NULL) { 4895 /* 4896 * keep the kidsupcount increment as is 4897 */ 4898 DEVI(dip)->devi_pm_flags |= PMC_NOPMKID; 4899 if (pdip && !PM_WANTS_NOTIFICATION(pdip)) { 4900 pm_hold_power(pdip); 4901 } else if (pdip && MDI_VHCI(pdip)) { 4902 (void) mdi_power(pdip, MDI_PM_HOLD_POWER, 4903 (void *)dip, NULL, 0); 4904 } 4905 4906 PMD(PMD_KIDSUP, ("%s: pm of %s@%s(%s#%d) failed, parent " 4907 "left up\n", pmf, PM_DEVICE(dip))) 4908 } 4909 4910 return (ret); 4911 } 4912 4913 /* 4914 * Keep a list of recorded thresholds. For now we just keep a list and 4915 * search it linearly. We don't expect too many entries. Can always hash it 4916 * later if we need to. 4917 */ 4918 void 4919 pm_record_thresh(pm_thresh_rec_t *rp) 4920 { 4921 pm_thresh_rec_t *pptr, *ptr; 4922 4923 ASSERT(*rp->ptr_physpath); 4924 rw_enter(&pm_thresh_rwlock, RW_WRITER); 4925 for (pptr = NULL, ptr = pm_thresh_head; 4926 ptr; pptr = ptr, ptr = ptr->ptr_next) { 4927 if (strcmp(rp->ptr_physpath, ptr->ptr_physpath) == 0) { 4928 /* replace this one */ 4929 rp->ptr_next = ptr->ptr_next; 4930 if (pptr) { 4931 pptr->ptr_next = rp; 4932 } else { 4933 pm_thresh_head = rp; 4934 } 4935 rw_exit(&pm_thresh_rwlock); 4936 kmem_free(ptr, ptr->ptr_size); 4937 return; 4938 } 4939 continue; 4940 } 4941 /* 4942 * There was not a match in the list, insert this one in front 4943 */ 4944 if (pm_thresh_head) { 4945 rp->ptr_next = pm_thresh_head; 4946 pm_thresh_head = rp; 4947 } else { 4948 rp->ptr_next = NULL; 4949 pm_thresh_head = rp; 4950 } 4951 rw_exit(&pm_thresh_rwlock); 4952 } 4953 4954 /* 4955 * Create a new dependency record and hang a new dependency entry off of it 4956 */ 4957 pm_pdr_t * 4958 newpdr(char *kept, char *keeps, int isprop) 4959 { 4960 size_t size = strlen(kept) + strlen(keeps) + 2 + sizeof (pm_pdr_t); 4961 pm_pdr_t *p = kmem_zalloc(size, KM_SLEEP); 4962 p->pdr_size = size; 4963 p->pdr_isprop = isprop; 4964 p->pdr_kept_paths = NULL; 4965 p->pdr_kept_count = 0; 4966 p->pdr_kept = (char *)((intptr_t)p + sizeof (pm_pdr_t)); 4967 (void) strcpy(p->pdr_kept, kept); 4968 p->pdr_keeper = (char *)((intptr_t)p->pdr_kept + strlen(kept) + 1); 4969 (void) strcpy(p->pdr_keeper, keeps); 4970 ASSERT((intptr_t)p->pdr_keeper + strlen(p->pdr_keeper) + 1 <= 4971 (intptr_t)p + size); 4972 ASSERT((intptr_t)p->pdr_kept + strlen(p->pdr_kept) + 1 <= 4973 (intptr_t)p + size); 4974 return (p); 4975 } 4976 4977 /* 4978 * Keep a list of recorded dependencies. We only keep the 4979 * keeper -> kept list for simplification. At this point We do not 4980 * care about whether the devices are attached or not yet, 4981 * this would be done in pm_keeper() and pm_kept(). 4982 * If a PM_RESET_PM happens, then we tear down and forget the dependencies, 4983 * and it is up to the user to issue the ioctl again if they want it 4984 * (e.g. pmconfig) 4985 * Returns true if dependency already exists in the list. 4986 */ 4987 int 4988 pm_record_keeper(char *kept, char *keeper, int isprop) 4989 { 4990 PMD_FUNC(pmf, "record_keeper") 4991 pm_pdr_t *npdr, *ppdr, *pdr; 4992 4993 PMD(PMD_KEEPS, ("%s: %s, %s\n", pmf, kept, keeper)) 4994 ASSERT(kept && keeper); 4995 #ifdef DEBUG 4996 if (pm_debug & PMD_KEEPS) 4997 prdeps("pm_record_keeper entry"); 4998 #endif 4999 for (ppdr = NULL, pdr = pm_dep_head; pdr; 5000 ppdr = pdr, pdr = pdr->pdr_next) { 5001 PMD(PMD_KEEPS, ("%s: check %s, %s\n", pmf, pdr->pdr_kept, 5002 pdr->pdr_keeper)) 5003 if (strcmp(kept, pdr->pdr_kept) == 0 && 5004 strcmp(keeper, pdr->pdr_keeper) == 0) { 5005 PMD(PMD_KEEPS, ("%s: match\n", pmf)) 5006 return (1); 5007 } 5008 } 5009 /* 5010 * We did not find any match, so we have to make an entry 5011 */ 5012 npdr = newpdr(kept, keeper, isprop); 5013 if (ppdr) { 5014 ASSERT(ppdr->pdr_next == NULL); 5015 ppdr->pdr_next = npdr; 5016 } else { 5017 ASSERT(pm_dep_head == NULL); 5018 pm_dep_head = npdr; 5019 } 5020 #ifdef DEBUG 5021 if (pm_debug & PMD_KEEPS) 5022 prdeps("pm_record_keeper after new record"); 5023 #endif 5024 if (!isprop) 5025 pm_unresolved_deps++; 5026 else 5027 pm_prop_deps++; 5028 return (0); 5029 } 5030 5031 /* 5032 * Look up this device in the set of devices we've seen ioctls for 5033 * to see if we are holding a threshold spec for it. If so, make it so. 5034 * At ioctl time, we were given the physical path of the device. 5035 */ 5036 int 5037 pm_thresh_specd(dev_info_t *dip) 5038 { 5039 void pm_apply_recorded_thresh(dev_info_t *, pm_thresh_rec_t *); 5040 char *path = 0; 5041 char pathbuf[MAXNAMELEN]; 5042 pm_thresh_rec_t *rp; 5043 5044 path = ddi_pathname(dip, pathbuf); 5045 5046 rw_enter(&pm_thresh_rwlock, RW_READER); 5047 for (rp = pm_thresh_head; rp; rp = rp->ptr_next) { 5048 if (strcmp(rp->ptr_physpath, path) != 0) 5049 continue; 5050 pm_apply_recorded_thresh(dip, rp); 5051 rw_exit(&pm_thresh_rwlock); 5052 return (1); 5053 } 5054 rw_exit(&pm_thresh_rwlock); 5055 return (0); 5056 } 5057 5058 static int 5059 pm_set_keeping(dev_info_t *keeper, dev_info_t *kept) 5060 { 5061 PMD_FUNC(pmf, "set_keeping") 5062 pm_info_t *kept_info; 5063 int j, up = 0, circ; 5064 void prdeps(char *); 5065 5066 PMD(PMD_KEEPS, ("%s: keeper=%s@%s(%s#%d), kept=%s@%s(%s#%d)\n", pmf, 5067 PM_DEVICE(keeper), PM_DEVICE(kept))) 5068 #ifdef DEBUG 5069 if (pm_debug & PMD_KEEPS) 5070 prdeps("Before PAD\n"); 5071 #endif 5072 ASSERT(keeper != kept); 5073 if (PM_GET_PM_INFO(keeper) == NULL) { 5074 cmn_err(CE_CONT, "!device %s@%s(%s#%d) keeps up device " 5075 "%s@%s(%s#%d), but the latter is not power managed", 5076 PM_DEVICE(keeper), PM_DEVICE(kept)); 5077 PMD((PMD_FAIL | PMD_KEEPS), ("%s: keeper %s@%s(%s#%d) is not" 5078 "power managed\n", pmf, PM_DEVICE(keeper))) 5079 return (0); 5080 } 5081 kept_info = PM_GET_PM_INFO(kept); 5082 ASSERT(kept_info); 5083 PM_LOCK_POWER(keeper, &circ); 5084 for (j = 0; j < PM_NUMCMPTS(keeper); j++) { 5085 if (PM_CURPOWER(keeper, j)) { 5086 up++; 5087 break; 5088 } 5089 } 5090 if (up) { 5091 /* Bringup and maintain a hold on the kept */ 5092 PMD(PMD_KEEPS, ("%s: place a hold on kept %s@%s(%s#%d)\n", pmf, 5093 PM_DEVICE(kept))) 5094 bring_pmdep_up(kept, 1); 5095 } 5096 PM_UNLOCK_POWER(keeper, circ); 5097 #ifdef DEBUG 5098 if (pm_debug & PMD_KEEPS) 5099 prdeps("After PAD\n"); 5100 #endif 5101 return (1); 5102 } 5103 5104 /* 5105 * Should this device keep up another device? 5106 * Look up this device in the set of devices we've seen ioctls for 5107 * to see if we are holding a dependency spec for it. If so, make it so. 5108 * Because we require the kept device to be attached already in order to 5109 * make the list entry (and hold it), we only need to look for keepers. 5110 * At ioctl time, we were given the physical path of the device. 5111 */ 5112 int 5113 pm_keeper(char *keeper) 5114 { 5115 PMD_FUNC(pmf, "keeper") 5116 int pm_apply_recorded_dep(dev_info_t *, pm_pdr_t *); 5117 dev_info_t *dip; 5118 pm_pdr_t *dp; 5119 dev_info_t *kept = NULL; 5120 int ret = 0; 5121 int i; 5122 5123 if (!pm_unresolved_deps && !pm_prop_deps) 5124 return (0); 5125 ASSERT(keeper != NULL); 5126 dip = pm_name_to_dip(keeper, 1); 5127 if (dip == NULL) 5128 return (0); 5129 PMD(PMD_KEEPS, ("%s: keeper=%s\n", pmf, keeper)) 5130 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 5131 if (!dp->pdr_isprop) { 5132 if (!pm_unresolved_deps) 5133 continue; 5134 PMD(PMD_KEEPS, ("%s: keeper %s\n", pmf, dp->pdr_keeper)) 5135 if (dp->pdr_satisfied) { 5136 PMD(PMD_KEEPS, ("%s: satisfied\n", pmf)) 5137 continue; 5138 } 5139 if (strcmp(dp->pdr_keeper, keeper) == 0) { 5140 ret += pm_apply_recorded_dep(dip, dp); 5141 } 5142 } else { 5143 if (strcmp(dp->pdr_keeper, keeper) != 0) 5144 continue; 5145 for (i = 0; i < dp->pdr_kept_count; i++) { 5146 if (dp->pdr_kept_paths[i] == NULL) 5147 continue; 5148 kept = pm_name_to_dip(dp->pdr_kept_paths[i], 1); 5149 if (kept == NULL) 5150 continue; 5151 ASSERT(ddi_prop_exists(DDI_DEV_T_ANY, kept, 5152 DDI_PROP_DONTPASS, dp->pdr_kept)); 5153 PMD(PMD_KEEPS, ("%s: keeper=%s@%s(%s#%d), " 5154 "kept=%s@%s(%s#%d) keptcnt=%d\n", 5155 pmf, PM_DEVICE(dip), PM_DEVICE(kept), 5156 dp->pdr_kept_count)) 5157 if (kept != dip) { 5158 ret += pm_set_keeping(dip, kept); 5159 } 5160 ddi_release_devi(kept); 5161 } 5162 5163 } 5164 } 5165 ddi_release_devi(dip); 5166 return (ret); 5167 } 5168 5169 /* 5170 * Should this device be kept up by another device? 5171 * Look up all dependency recorded from PM_ADD_DEPENDENT and 5172 * PM_ADD_DEPENDENT_PROPERTY ioctls. Record down on the keeper's 5173 * kept device lists. 5174 */ 5175 static int 5176 pm_kept(char *keptp) 5177 { 5178 PMD_FUNC(pmf, "kept") 5179 pm_pdr_t *dp; 5180 int found = 0; 5181 int ret = 0; 5182 dev_info_t *keeper; 5183 dev_info_t *kept; 5184 size_t length; 5185 int i; 5186 char **paths; 5187 char *path; 5188 5189 ASSERT(keptp != NULL); 5190 kept = pm_name_to_dip(keptp, 1); 5191 if (kept == NULL) 5192 return (0); 5193 PMD(PMD_KEEPS, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(kept))) 5194 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 5195 if (dp->pdr_isprop) { 5196 PMD(PMD_KEEPS, ("%s: property %s\n", pmf, dp->pdr_kept)) 5197 if (ddi_prop_exists(DDI_DEV_T_ANY, kept, 5198 DDI_PROP_DONTPASS, dp->pdr_kept)) { 5199 /* 5200 * Dont allow self dependency. 5201 */ 5202 if (strcmp(dp->pdr_keeper, keptp) == 0) 5203 continue; 5204 keeper = pm_name_to_dip(dp->pdr_keeper, 1); 5205 if (keeper == NULL) 5206 continue; 5207 PMD(PMD_KEEPS, ("%s: adding to kepts path list " 5208 "%p\n", pmf, (void *)kept)) 5209 #ifdef DEBUG 5210 if (pm_debug & PMD_DEP) 5211 prdeps("Before Adding from pm_kept\n"); 5212 #endif 5213 /* 5214 * Add ourselves to the dip list. 5215 */ 5216 if (dp->pdr_kept_count == 0) { 5217 length = strlen(keptp) + 1; 5218 path = 5219 kmem_alloc(length, KM_SLEEP); 5220 paths = kmem_alloc(sizeof (char **), 5221 KM_SLEEP); 5222 (void) strcpy(path, keptp); 5223 paths[0] = path; 5224 dp->pdr_kept_paths = paths; 5225 dp->pdr_kept_count++; 5226 } else { 5227 /* Check to see if already on list */ 5228 for (i = 0; i < dp->pdr_kept_count; 5229 i++) { 5230 if (strcmp(keptp, 5231 dp->pdr_kept_paths[i]) 5232 == 0) { 5233 found++; 5234 break; 5235 } 5236 } 5237 if (found) { 5238 ddi_release_devi(keeper); 5239 continue; 5240 } 5241 length = dp->pdr_kept_count * 5242 sizeof (char **); 5243 paths = kmem_alloc( 5244 length + sizeof (char **), 5245 KM_SLEEP); 5246 if (dp->pdr_kept_count) { 5247 bcopy(dp->pdr_kept_paths, 5248 paths, length); 5249 kmem_free(dp->pdr_kept_paths, 5250 length); 5251 } 5252 dp->pdr_kept_paths = paths; 5253 length = strlen(keptp) + 1; 5254 path = 5255 kmem_alloc(length, KM_SLEEP); 5256 (void) strcpy(path, keptp); 5257 dp->pdr_kept_paths[i] = path; 5258 dp->pdr_kept_count++; 5259 } 5260 #ifdef DEBUG 5261 if (pm_debug & PMD_DEP) 5262 prdeps("After from pm_kept\n"); 5263 #endif 5264 if (keeper) { 5265 ret += pm_set_keeping(keeper, kept); 5266 ddi_release_devi(keeper); 5267 } 5268 } 5269 } else { 5270 /* 5271 * pm_keeper would be called later to do 5272 * the actual pm_set_keeping. 5273 */ 5274 PMD(PMD_KEEPS, ("%s: adding to kepts path list %p\n", 5275 pmf, (void *)kept)) 5276 #ifdef DEBUG 5277 if (pm_debug & PMD_DEP) 5278 prdeps("Before Adding from pm_kept\n"); 5279 #endif 5280 if (strcmp(keptp, dp->pdr_kept) == 0) { 5281 if (dp->pdr_kept_paths == NULL) { 5282 length = strlen(keptp) + 1; 5283 path = 5284 kmem_alloc(length, KM_SLEEP); 5285 paths = kmem_alloc(sizeof (char **), 5286 KM_SLEEP); 5287 (void) strcpy(path, keptp); 5288 paths[0] = path; 5289 dp->pdr_kept_paths = paths; 5290 dp->pdr_kept_count++; 5291 } 5292 } 5293 #ifdef DEBUG 5294 if (pm_debug & PMD_DEP) 5295 prdeps("After from pm_kept\n"); 5296 #endif 5297 } 5298 } 5299 ddi_release_devi(kept); 5300 return (ret); 5301 } 5302 5303 /* 5304 * Apply a recorded dependency. dp specifies the dependency, and 5305 * keeper is already known to be the device that keeps up the other (kept) one. 5306 * We have to the whole tree for the "kept" device, then apply 5307 * the dependency (which may already be applied). 5308 */ 5309 int 5310 pm_apply_recorded_dep(dev_info_t *keeper, pm_pdr_t *dp) 5311 { 5312 PMD_FUNC(pmf, "apply_recorded_dep") 5313 dev_info_t *kept = NULL; 5314 int ret = 0; 5315 char *keptp = NULL; 5316 5317 /* 5318 * Device to Device dependency can only be 1 to 1. 5319 */ 5320 if (dp->pdr_kept_paths == NULL) 5321 return (0); 5322 keptp = dp->pdr_kept_paths[0]; 5323 if (keptp == NULL) 5324 return (0); 5325 ASSERT(*keptp != '\0'); 5326 kept = pm_name_to_dip(keptp, 1); 5327 if (kept == NULL) 5328 return (0); 5329 if (kept) { 5330 PMD(PMD_KEEPS, ("%s: keeper=%s, kept=%s\n", pmf, 5331 dp->pdr_keeper, keptp)) 5332 if (pm_set_keeping(keeper, kept)) { 5333 ASSERT(dp->pdr_satisfied == 0); 5334 dp->pdr_satisfied = 1; 5335 ASSERT(pm_unresolved_deps); 5336 pm_unresolved_deps--; 5337 ret++; 5338 } 5339 } 5340 ddi_release_devi(kept); 5341 5342 return (ret); 5343 } 5344 5345 /* 5346 * Called from common/io/pm.c 5347 */ 5348 int 5349 pm_cur_power(pm_component_t *cp) 5350 { 5351 return (cur_power(cp)); 5352 } 5353 5354 /* 5355 * External interface to sanity-check a power level. 5356 */ 5357 int 5358 pm_valid_power(dev_info_t *dip, int comp, int level) 5359 { 5360 PMD_FUNC(pmf, "valid_power") 5361 5362 if (comp >= 0 && comp < PM_NUMCMPTS(dip) && level >= 0) 5363 return (e_pm_valid_power(dip, comp, level)); 5364 else { 5365 PMD(PMD_FAIL, ("%s: comp=%d, ncomp=%d, level=%d\n", 5366 pmf, comp, PM_NUMCMPTS(dip), level)) 5367 return (0); 5368 } 5369 } 5370 5371 /* 5372 * Called when a device that is direct power managed needs to change state. 5373 * This routine arranges to block the request until the process managing 5374 * the device makes the change (or some other incompatible change) or 5375 * the process closes /dev/pm. 5376 */ 5377 static int 5378 pm_block(dev_info_t *dip, int comp, int newpower, int oldpower) 5379 { 5380 pm_rsvp_t *new = kmem_zalloc(sizeof (*new), KM_SLEEP); 5381 int ret = 0; 5382 void pm_dequeue_blocked(pm_rsvp_t *); 5383 void pm_enqueue_blocked(pm_rsvp_t *); 5384 5385 ASSERT(!pm_processes_stopped); 5386 ASSERT(PM_IAM_LOCKING_DIP(dip)); 5387 new->pr_dip = dip; 5388 new->pr_comp = comp; 5389 new->pr_newlevel = newpower; 5390 new->pr_oldlevel = oldpower; 5391 cv_init(&new->pr_cv, NULL, CV_DEFAULT, NULL); 5392 mutex_enter(&pm_rsvp_lock); 5393 pm_enqueue_blocked(new); 5394 pm_enqueue_notify(PSC_PENDING_CHANGE, dip, comp, newpower, oldpower, 5395 PM_CANBLOCK_BLOCK); 5396 PM_UNLOCK_DIP(dip); 5397 /* 5398 * truss may make the cv_wait_sig return prematurely 5399 */ 5400 while (ret == 0) { 5401 /* 5402 * Normally there will be no user context involved, but if 5403 * there is (e.g. we are here via an ioctl call to a driver) 5404 * then we should allow the process to abort the request, 5405 * or we get an unkillable process if the same thread does 5406 * PM_DIRECT_PM and pm_raise_power 5407 */ 5408 if (cv_wait_sig(&new->pr_cv, &pm_rsvp_lock) == 0) { 5409 ret = PMP_FAIL; 5410 } else { 5411 ret = new->pr_retval; 5412 } 5413 } 5414 pm_dequeue_blocked(new); 5415 mutex_exit(&pm_rsvp_lock); 5416 cv_destroy(&new->pr_cv); 5417 kmem_free(new, sizeof (*new)); 5418 return (ret); 5419 } 5420 5421 /* 5422 * Returns true if the process is interested in power level changes (has issued 5423 * PM_GET_STATE_CHANGE ioctl). 5424 */ 5425 int 5426 pm_interest_registered(int clone) 5427 { 5428 ASSERT(clone >= 0 && clone < PM_MAX_CLONE - 1); 5429 return (pm_interest[clone]); 5430 } 5431 5432 /* 5433 * Process with clone has just done PM_DIRECT_PM on dip, or has asked to 5434 * watch all state transitions (dip == NULL). Set up data 5435 * structs to communicate with process about state changes. 5436 */ 5437 void 5438 pm_register_watcher(int clone, dev_info_t *dip) 5439 { 5440 pscc_t *p; 5441 psce_t *psce; 5442 static void pm_enqueue_pscc(pscc_t *, pscc_t **); 5443 5444 /* 5445 * We definitely need a control struct, then we have to search to see 5446 * there is already an entries struct (in the dip != NULL case). 5447 */ 5448 pscc_t *pscc = kmem_zalloc(sizeof (*pscc), KM_SLEEP); 5449 pscc->pscc_clone = clone; 5450 pscc->pscc_dip = dip; 5451 5452 if (dip) { 5453 int found = 0; 5454 rw_enter(&pm_pscc_direct_rwlock, RW_WRITER); 5455 for (p = pm_pscc_direct; p; p = p->pscc_next) { 5456 /* 5457 * Already an entry for this clone, so just use it 5458 * for the new one (for the case where a single 5459 * process is watching multiple devices) 5460 */ 5461 if (p->pscc_clone == clone) { 5462 ASSERT(p->pscc_dip != dip); 5463 pscc->pscc_entries = p->pscc_entries; 5464 pscc->pscc_entries->psce_references++; 5465 found++; 5466 } 5467 } 5468 if (!found) { /* create a new one */ 5469 psce = kmem_zalloc(sizeof (psce_t), KM_SLEEP); 5470 mutex_init(&psce->psce_lock, NULL, MUTEX_DEFAULT, NULL); 5471 psce->psce_first = 5472 kmem_zalloc(sizeof (pm_state_change_t) * PSCCOUNT, 5473 KM_SLEEP); 5474 psce->psce_in = psce->psce_out = psce->psce_first; 5475 psce->psce_last = &psce->psce_first[PSCCOUNT - 1]; 5476 psce->psce_references = 1; 5477 pscc->pscc_entries = psce; 5478 } 5479 pm_enqueue_pscc(pscc, &pm_pscc_direct); 5480 rw_exit(&pm_pscc_direct_rwlock); 5481 } else { 5482 ASSERT(!pm_interest_registered(clone)); 5483 rw_enter(&pm_pscc_interest_rwlock, RW_WRITER); 5484 #ifdef DEBUG 5485 for (p = pm_pscc_interest; p; p = p->pscc_next) { 5486 /* 5487 * Should not be an entry for this clone! 5488 */ 5489 ASSERT(p->pscc_clone != clone); 5490 } 5491 #endif 5492 psce = kmem_zalloc(sizeof (psce_t), KM_SLEEP); 5493 psce->psce_first = kmem_zalloc(sizeof (pm_state_change_t) * 5494 PSCCOUNT, KM_SLEEP); 5495 psce->psce_in = psce->psce_out = psce->psce_first; 5496 psce->psce_last = &psce->psce_first[PSCCOUNT - 1]; 5497 psce->psce_references = 1; 5498 pscc->pscc_entries = psce; 5499 pm_enqueue_pscc(pscc, &pm_pscc_interest); 5500 pm_interest[clone] = 1; 5501 rw_exit(&pm_pscc_interest_rwlock); 5502 } 5503 } 5504 5505 /* 5506 * Remove the given entry from the blocked list 5507 */ 5508 void 5509 pm_dequeue_blocked(pm_rsvp_t *p) 5510 { 5511 ASSERT(MUTEX_HELD(&pm_rsvp_lock)); 5512 if (pm_blocked_list == p) { 5513 ASSERT(p->pr_prev == NULL); 5514 if (p->pr_next != NULL) 5515 p->pr_next->pr_prev = NULL; 5516 pm_blocked_list = p->pr_next; 5517 } else { 5518 ASSERT(p->pr_prev != NULL); 5519 p->pr_prev->pr_next = p->pr_next; 5520 if (p->pr_next != NULL) 5521 p->pr_next->pr_prev = p->pr_prev; 5522 } 5523 } 5524 5525 /* 5526 * Remove the given control struct from the given list 5527 */ 5528 static void 5529 pm_dequeue_pscc(pscc_t *p, pscc_t **list) 5530 { 5531 if (*list == p) { 5532 ASSERT(p->pscc_prev == NULL); 5533 if (p->pscc_next != NULL) 5534 p->pscc_next->pscc_prev = NULL; 5535 *list = p->pscc_next; 5536 } else { 5537 ASSERT(p->pscc_prev != NULL); 5538 p->pscc_prev->pscc_next = p->pscc_next; 5539 if (p->pscc_next != NULL) 5540 p->pscc_next->pscc_prev = p->pscc_prev; 5541 } 5542 } 5543 5544 /* 5545 * Stick the control struct specified on the front of the list 5546 */ 5547 static void 5548 pm_enqueue_pscc(pscc_t *p, pscc_t **list) 5549 { 5550 pscc_t *h; /* entry at head of list */ 5551 if ((h = *list) == NULL) { 5552 *list = p; 5553 ASSERT(p->pscc_next == NULL); 5554 ASSERT(p->pscc_prev == NULL); 5555 } else { 5556 p->pscc_next = h; 5557 ASSERT(h->pscc_prev == NULL); 5558 h->pscc_prev = p; 5559 ASSERT(p->pscc_prev == NULL); 5560 *list = p; 5561 } 5562 } 5563 5564 /* 5565 * If dip is NULL, process is closing "clone" clean up all its registrations. 5566 * Otherwise only clean up those for dip because process is just giving up 5567 * control of a direct device. 5568 */ 5569 void 5570 pm_deregister_watcher(int clone, dev_info_t *dip) 5571 { 5572 pscc_t *p, *pn; 5573 psce_t *psce; 5574 int found = 0; 5575 5576 if (dip == NULL) { 5577 rw_enter(&pm_pscc_interest_rwlock, RW_WRITER); 5578 for (p = pm_pscc_interest; p; p = pn) { 5579 pn = p->pscc_next; 5580 if (p->pscc_clone == clone) { 5581 pm_dequeue_pscc(p, &pm_pscc_interest); 5582 psce = p->pscc_entries; 5583 ASSERT(psce->psce_references == 1); 5584 mutex_destroy(&psce->psce_lock); 5585 kmem_free(psce->psce_first, 5586 sizeof (pm_state_change_t) * PSCCOUNT); 5587 kmem_free(psce, sizeof (*psce)); 5588 kmem_free(p, sizeof (*p)); 5589 } 5590 } 5591 pm_interest[clone] = 0; 5592 rw_exit(&pm_pscc_interest_rwlock); 5593 } 5594 found = 0; 5595 rw_enter(&pm_pscc_direct_rwlock, RW_WRITER); 5596 for (p = pm_pscc_direct; p; p = pn) { 5597 pn = p->pscc_next; 5598 if ((dip && p->pscc_dip == dip) || 5599 (dip == NULL && clone == p->pscc_clone)) { 5600 ASSERT(clone == p->pscc_clone); 5601 found++; 5602 /* 5603 * Remove from control list 5604 */ 5605 pm_dequeue_pscc(p, &pm_pscc_direct); 5606 /* 5607 * If we're the last reference, free the 5608 * entries struct. 5609 */ 5610 psce = p->pscc_entries; 5611 ASSERT(psce); 5612 if (psce->psce_references == 1) { 5613 kmem_free(psce->psce_first, 5614 PSCCOUNT * sizeof (pm_state_change_t)); 5615 kmem_free(psce, sizeof (*psce)); 5616 } else { 5617 psce->psce_references--; 5618 } 5619 kmem_free(p, sizeof (*p)); 5620 } 5621 } 5622 ASSERT(dip == NULL || found); 5623 rw_exit(&pm_pscc_direct_rwlock); 5624 } 5625 5626 /* 5627 * Search the indicated list for an entry that matches clone, and return a 5628 * pointer to it. To be interesting, the entry must have something ready to 5629 * be passed up to the controlling process. 5630 * The returned entry will be locked upon return from this call. 5631 */ 5632 static psce_t * 5633 pm_psc_find_clone(int clone, pscc_t **list, krwlock_t *lock) 5634 { 5635 pscc_t *p; 5636 psce_t *psce; 5637 rw_enter(lock, RW_READER); 5638 for (p = *list; p; p = p->pscc_next) { 5639 if (clone == p->pscc_clone) { 5640 psce = p->pscc_entries; 5641 mutex_enter(&psce->psce_lock); 5642 if (psce->psce_out->size) { 5643 rw_exit(lock); 5644 return (psce); 5645 } else { 5646 mutex_exit(&psce->psce_lock); 5647 } 5648 } 5649 } 5650 rw_exit(lock); 5651 return (NULL); 5652 } 5653 5654 /* 5655 * Find an entry for a particular clone in the direct list. 5656 */ 5657 psce_t * 5658 pm_psc_clone_to_direct(int clone) 5659 { 5660 static psce_t *pm_psc_find_clone(int, pscc_t **, krwlock_t *); 5661 return (pm_psc_find_clone(clone, &pm_pscc_direct, 5662 &pm_pscc_direct_rwlock)); 5663 } 5664 5665 /* 5666 * Find an entry for a particular clone in the interest list. 5667 */ 5668 psce_t * 5669 pm_psc_clone_to_interest(int clone) 5670 { 5671 static psce_t *pm_psc_find_clone(int, pscc_t **, krwlock_t *); 5672 return (pm_psc_find_clone(clone, &pm_pscc_interest, 5673 &pm_pscc_interest_rwlock)); 5674 } 5675 5676 /* 5677 * Put the given entry at the head of the blocked list 5678 */ 5679 void 5680 pm_enqueue_blocked(pm_rsvp_t *p) 5681 { 5682 ASSERT(MUTEX_HELD(&pm_rsvp_lock)); 5683 ASSERT(p->pr_next == NULL); 5684 ASSERT(p->pr_prev == NULL); 5685 if (pm_blocked_list != NULL) { 5686 p->pr_next = pm_blocked_list; 5687 ASSERT(pm_blocked_list->pr_prev == NULL); 5688 pm_blocked_list->pr_prev = p; 5689 pm_blocked_list = p; 5690 } else { 5691 pm_blocked_list = p; 5692 } 5693 } 5694 5695 /* 5696 * Sets every power managed device back to its default threshold 5697 */ 5698 void 5699 pm_all_to_default_thresholds(void) 5700 { 5701 ddi_walk_devs(ddi_root_node(), pm_set_dev_thr_walk, 5702 (void *) &pm_system_idle_threshold); 5703 } 5704 5705 static int 5706 pm_set_dev_thr_walk(dev_info_t *dip, void *arg) 5707 { 5708 int thr = (int)(*(int *)arg); 5709 5710 if (!PM_GET_PM_INFO(dip)) 5711 return (DDI_WALK_CONTINUE); 5712 pm_set_device_threshold(dip, thr, PMC_DEF_THRESH); 5713 return (DDI_WALK_CONTINUE); 5714 } 5715 5716 /* 5717 * Returns the current threshold value (in seconds) for the indicated component 5718 */ 5719 int 5720 pm_current_threshold(dev_info_t *dip, int comp, int *threshp) 5721 { 5722 if (comp < 0 || comp >= PM_NUMCMPTS(dip)) { 5723 return (DDI_FAILURE); 5724 } else { 5725 *threshp = cur_threshold(dip, comp); 5726 return (DDI_SUCCESS); 5727 } 5728 } 5729 5730 /* 5731 * To be called when changing the power level of a component of a device. 5732 * On some platforms, changing power on one device may require that power 5733 * be changed on other, related devices in the same transaction. Thus, we 5734 * always pass this request to the platform power manager so that all the 5735 * affected devices will be locked. 5736 */ 5737 void 5738 pm_lock_power(dev_info_t *dip, int *circp) 5739 { 5740 power_req_t power_req; 5741 int result; 5742 5743 power_req.request_type = PMR_PPM_LOCK_POWER; 5744 power_req.req.ppm_lock_power_req.who = dip; 5745 power_req.req.ppm_lock_power_req.circp = circp; 5746 (void) pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, &power_req, &result); 5747 } 5748 5749 /* 5750 * Release the lock (or locks) acquired to change the power of a device. 5751 * See comments for pm_lock_power. 5752 */ 5753 void 5754 pm_unlock_power(dev_info_t *dip, int circ) 5755 { 5756 power_req_t power_req; 5757 int result; 5758 5759 power_req.request_type = PMR_PPM_UNLOCK_POWER; 5760 power_req.req.ppm_unlock_power_req.who = dip; 5761 power_req.req.ppm_unlock_power_req.circ = circ; 5762 (void) pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, &power_req, &result); 5763 } 5764 5765 5766 /* 5767 * Attempt (without blocking) to acquire the lock(s) needed to change the 5768 * power of a component of a device. See comments for pm_lock_power. 5769 * 5770 * Return: 1 if lock(s) acquired, 0 if not. 5771 */ 5772 int 5773 pm_try_locking_power(dev_info_t *dip, int *circp) 5774 { 5775 power_req_t power_req; 5776 int result; 5777 5778 power_req.request_type = PMR_PPM_TRY_LOCK_POWER; 5779 power_req.req.ppm_lock_power_req.who = dip; 5780 power_req.req.ppm_lock_power_req.circp = circp; 5781 (void) pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, &power_req, &result); 5782 return (result); 5783 } 5784 5785 5786 /* 5787 * Lock power state of a device. 5788 * 5789 * The implementation handles a special case where another thread may have 5790 * acquired the lock and created/launched this thread to do the work. If 5791 * the lock cannot be acquired immediately, we check to see if this thread 5792 * is registered as a borrower of the lock. If so, we may proceed without 5793 * the lock. This assumes that the lending thread blocks on the completion 5794 * of this thread. 5795 * 5796 * Note 1: for use by ppm only. 5797 * 5798 * Note 2: On failing to get the lock immediately, we search lock_loan list 5799 * for curthread (as borrower of the lock). On a hit, we check that the 5800 * lending thread already owns the lock we want. It is safe to compare 5801 * devi_busy_thread and thread id of the lender because in the == case (the 5802 * only one we care about) we know that the owner is blocked. Similarly, 5803 * If we find that curthread isn't registered as a lock borrower, it is safe 5804 * to use the blocking call (ndi_devi_enter) because we know that if we 5805 * weren't already listed as a borrower (upstream on the call stack) we won't 5806 * become one. 5807 */ 5808 void 5809 pm_lock_power_single(dev_info_t *dip, int *circp) 5810 { 5811 lock_loan_t *cur; 5812 5813 /* if the lock is available, we are done. */ 5814 if (ndi_devi_tryenter(dip, circp)) 5815 return; 5816 5817 mutex_enter(&pm_loan_lock); 5818 /* see if our thread is registered as a lock borrower. */ 5819 for (cur = lock_loan_head.pmlk_next; cur; cur = cur->pmlk_next) 5820 if (cur->pmlk_borrower == curthread) 5821 break; 5822 mutex_exit(&pm_loan_lock); 5823 5824 /* if this thread not already registered, it is safe to block */ 5825 if (cur == NULL) 5826 ndi_devi_enter(dip, circp); 5827 else { 5828 /* registered: does lender own the lock we want? */ 5829 if (cur->pmlk_lender == DEVI(dip)->devi_busy_thread) { 5830 ASSERT(cur->pmlk_dip == NULL || cur->pmlk_dip == dip); 5831 cur->pmlk_dip = dip; 5832 } else /* no: just block for it */ 5833 ndi_devi_enter(dip, circp); 5834 5835 } 5836 } 5837 5838 /* 5839 * Drop the lock on the device's power state. See comment for 5840 * pm_lock_power_single() for special implementation considerations. 5841 * 5842 * Note: for use by ppm only. 5843 */ 5844 void 5845 pm_unlock_power_single(dev_info_t *dip, int circ) 5846 { 5847 lock_loan_t *cur; 5848 5849 /* optimization: mutex not needed to check empty list */ 5850 if (lock_loan_head.pmlk_next == NULL) { 5851 ndi_devi_exit(dip, circ); 5852 return; 5853 } 5854 5855 mutex_enter(&pm_loan_lock); 5856 /* see if our thread is registered as a lock borrower. */ 5857 for (cur = lock_loan_head.pmlk_next; cur; cur = cur->pmlk_next) 5858 if (cur->pmlk_borrower == curthread) 5859 break; 5860 mutex_exit(&pm_loan_lock); 5861 5862 if (cur == NULL || cur->pmlk_dip != dip) 5863 /* we acquired the lock directly, so return it */ 5864 ndi_devi_exit(dip, circ); 5865 } 5866 5867 /* 5868 * Try to take the lock for changing the power level of a component. 5869 * 5870 * Note: for use by ppm only. 5871 */ 5872 int 5873 pm_try_locking_power_single(dev_info_t *dip, int *circp) 5874 { 5875 return (ndi_devi_tryenter(dip, circp)); 5876 } 5877 5878 #ifdef DEBUG 5879 /* 5880 * The following are used only to print out data structures for debugging 5881 */ 5882 void 5883 prdeps(char *msg) 5884 { 5885 5886 pm_pdr_t *rp; 5887 int i; 5888 5889 pm_log("pm_dep_head %s %p\n", msg, (void *)pm_dep_head); 5890 for (rp = pm_dep_head; rp; rp = rp->pdr_next) { 5891 pm_log("%p: %s keeper %s, kept %s, kept count %d, next %p\n", 5892 (void *)rp, (rp->pdr_isprop ? "property" : "device"), 5893 rp->pdr_keeper, rp->pdr_kept, rp->pdr_kept_count, 5894 (void *)rp->pdr_next); 5895 if (rp->pdr_kept_count != 0) { 5896 pm_log("kept list = "); 5897 i = 0; 5898 while (i < rp->pdr_kept_count) { 5899 pm_log("%s ", rp->pdr_kept_paths[i]); 5900 i++; 5901 } 5902 pm_log("\n"); 5903 } 5904 } 5905 } 5906 5907 void 5908 pr_noinvol(char *hdr) 5909 { 5910 pm_noinvol_t *ip; 5911 5912 pm_log("%s\n", hdr); 5913 rw_enter(&pm_noinvol_rwlock, RW_READER); 5914 for (ip = pm_noinvol_head; ip; ip = ip->ni_next) 5915 pm_log("\tmaj %d, flags %x, noinvolpm %d %s\n", 5916 ip->ni_major, ip->ni_flags, ip->ni_noinvolpm, ip->ni_path); 5917 rw_exit(&pm_noinvol_rwlock); 5918 } 5919 #endif 5920 5921 /* 5922 * Attempt to apply the thresholds indicated by rp to the node specified by 5923 * dip. 5924 */ 5925 void 5926 pm_apply_recorded_thresh(dev_info_t *dip, pm_thresh_rec_t *rp) 5927 { 5928 PMD_FUNC(pmf, "apply_recorded_thresh") 5929 int i, j; 5930 int comps = PM_NUMCMPTS(dip); 5931 struct pm_component *cp; 5932 pm_pte_t *ep; 5933 int pm_valid_thresh(dev_info_t *, pm_thresh_rec_t *); 5934 5935 PMD(PMD_THRESH, ("%s: part: %s@%s(%s#%d), rp %p, %s\n", pmf, 5936 PM_DEVICE(dip), (void *)rp, rp->ptr_physpath)) 5937 PM_LOCK_DIP(dip); 5938 if (!PM_GET_PM_INFO(dip) || PM_ISBC(dip) || !pm_valid_thresh(dip, rp)) { 5939 PMD(PMD_FAIL, ("%s: part: %s@%s(%s#%d) PM_GET_PM_INFO %p\n", 5940 pmf, PM_DEVICE(dip), (void*)PM_GET_PM_INFO(dip))) 5941 PMD(PMD_FAIL, ("%s: part: %s@%s(%s#%d) PM_ISBC %d\n", 5942 pmf, PM_DEVICE(dip), PM_ISBC(dip))) 5943 PMD(PMD_FAIL, ("%s: part: %s@%s(%s#%d) pm_valid_thresh %d\n", 5944 pmf, PM_DEVICE(dip), pm_valid_thresh(dip, rp))) 5945 PM_UNLOCK_DIP(dip); 5946 return; 5947 } 5948 5949 ep = rp->ptr_entries; 5950 /* 5951 * Here we do the special case of a device threshold 5952 */ 5953 if (rp->ptr_numcomps == 0) { /* PM_SET_DEVICE_THRESHOLD product */ 5954 ASSERT(ep && ep->pte_numthresh == 1); 5955 PMD(PMD_THRESH, ("%s: set dev thr %s@%s(%s#%d) to 0x%x\n", 5956 pmf, PM_DEVICE(dip), ep->pte_thresh[0])) 5957 PM_UNLOCK_DIP(dip); 5958 pm_set_device_threshold(dip, ep->pte_thresh[0], PMC_DEV_THRESH); 5959 if (autopm_enabled) 5960 pm_rescan(dip); 5961 return; 5962 } 5963 for (i = 0; i < comps; i++) { 5964 cp = PM_CP(dip, i); 5965 for (j = 0; j < ep->pte_numthresh; j++) { 5966 PMD(PMD_THRESH, ("%s: set thr %d for %s@%s(%s#%d)[%d] " 5967 "to %x\n", pmf, j, PM_DEVICE(dip), 5968 i, ep->pte_thresh[j])) 5969 cp->pmc_comp.pmc_thresh[j + 1] = ep->pte_thresh[j]; 5970 } 5971 ep++; 5972 } 5973 DEVI(dip)->devi_pm_flags &= PMC_THRESH_NONE; 5974 DEVI(dip)->devi_pm_flags |= PMC_COMP_THRESH; 5975 PM_UNLOCK_DIP(dip); 5976 5977 if (autopm_enabled) 5978 pm_rescan(dip); 5979 } 5980 5981 /* 5982 * Returns true if the threshold specified by rp could be applied to dip 5983 * (that is, the number of components and transitions are the same) 5984 */ 5985 int 5986 pm_valid_thresh(dev_info_t *dip, pm_thresh_rec_t *rp) 5987 { 5988 PMD_FUNC(pmf, "valid_thresh") 5989 int comps, i; 5990 pm_component_t *cp; 5991 pm_pte_t *ep; 5992 5993 if (!PM_GET_PM_INFO(dip) || PM_ISBC(dip)) { 5994 PMD(PMD_ERROR, ("%s: %s: no pm_info or BC\n", pmf, 5995 rp->ptr_physpath)) 5996 return (0); 5997 } 5998 /* 5999 * Special case: we represent the PM_SET_DEVICE_THRESHOLD case by 6000 * an entry with numcomps == 0, (since we don't know how many 6001 * components there are in advance). This is always a valid 6002 * spec. 6003 */ 6004 if (rp->ptr_numcomps == 0) { 6005 ASSERT(rp->ptr_entries && rp->ptr_entries->pte_numthresh == 1); 6006 return (1); 6007 } 6008 if (rp->ptr_numcomps != (comps = PM_NUMCMPTS(dip))) { 6009 PMD(PMD_ERROR, ("%s: comp # mm (dip %d cmd %d) for %s\n", 6010 pmf, PM_NUMCMPTS(dip), rp->ptr_numcomps, rp->ptr_physpath)) 6011 return (0); 6012 } 6013 ep = rp->ptr_entries; 6014 for (i = 0; i < comps; i++) { 6015 cp = PM_CP(dip, i); 6016 if ((ep + i)->pte_numthresh != 6017 cp->pmc_comp.pmc_numlevels - 1) { 6018 PMD(PMD_ERROR, ("%s: %s[%d]: thresh=%d, record=%d\n", 6019 pmf, rp->ptr_physpath, i, 6020 cp->pmc_comp.pmc_numlevels - 1, 6021 (ep + i)->pte_numthresh)) 6022 return (0); 6023 } 6024 } 6025 return (1); 6026 } 6027 6028 /* 6029 * Remove any recorded threshold for device physpath 6030 * We know there will be at most one. 6031 */ 6032 void 6033 pm_unrecord_threshold(char *physpath) 6034 { 6035 pm_thresh_rec_t *pptr, *ptr; 6036 6037 rw_enter(&pm_thresh_rwlock, RW_WRITER); 6038 for (pptr = NULL, ptr = pm_thresh_head; ptr; ptr = ptr->ptr_next) { 6039 if (strcmp(physpath, ptr->ptr_physpath) == 0) { 6040 if (pptr) { 6041 pptr->ptr_next = ptr->ptr_next; 6042 } else { 6043 ASSERT(pm_thresh_head == ptr); 6044 pm_thresh_head = ptr->ptr_next; 6045 } 6046 kmem_free(ptr, ptr->ptr_size); 6047 break; 6048 } 6049 pptr = ptr; 6050 } 6051 rw_exit(&pm_thresh_rwlock); 6052 } 6053 6054 /* 6055 * Discard all recorded thresholds. We are returning to the default pm state. 6056 */ 6057 void 6058 pm_discard_thresholds(void) 6059 { 6060 pm_thresh_rec_t *rp; 6061 rw_enter(&pm_thresh_rwlock, RW_WRITER); 6062 while (pm_thresh_head) { 6063 rp = pm_thresh_head; 6064 pm_thresh_head = rp->ptr_next; 6065 kmem_free(rp, rp->ptr_size); 6066 } 6067 rw_exit(&pm_thresh_rwlock); 6068 } 6069 6070 /* 6071 * Discard all recorded dependencies. We are returning to the default pm state. 6072 */ 6073 void 6074 pm_discard_dependencies(void) 6075 { 6076 pm_pdr_t *rp; 6077 int i; 6078 size_t length; 6079 6080 #ifdef DEBUG 6081 if (pm_debug & PMD_DEP) 6082 prdeps("Before discard\n"); 6083 #endif 6084 ddi_walk_devs(ddi_root_node(), pm_discard_dep_walk, NULL); 6085 6086 #ifdef DEBUG 6087 if (pm_debug & PMD_DEP) 6088 prdeps("After discard\n"); 6089 #endif 6090 while (pm_dep_head) { 6091 rp = pm_dep_head; 6092 if (!rp->pdr_isprop) { 6093 ASSERT(rp->pdr_satisfied == 0); 6094 ASSERT(pm_unresolved_deps); 6095 pm_unresolved_deps--; 6096 } else { 6097 ASSERT(pm_prop_deps); 6098 pm_prop_deps--; 6099 } 6100 pm_dep_head = rp->pdr_next; 6101 if (rp->pdr_kept_count) { 6102 for (i = 0; i < rp->pdr_kept_count; i++) { 6103 length = strlen(rp->pdr_kept_paths[i]) + 1; 6104 kmem_free(rp->pdr_kept_paths[i], length); 6105 } 6106 kmem_free(rp->pdr_kept_paths, 6107 rp->pdr_kept_count * sizeof (char **)); 6108 } 6109 kmem_free(rp, rp->pdr_size); 6110 } 6111 } 6112 6113 6114 static int 6115 pm_discard_dep_walk(dev_info_t *dip, void *arg) 6116 { 6117 _NOTE(ARGUNUSED(arg)) 6118 char *pathbuf; 6119 6120 if (PM_GET_PM_INFO(dip) == NULL) 6121 return (DDI_WALK_CONTINUE); 6122 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 6123 (void) ddi_pathname(dip, pathbuf); 6124 pm_free_keeper(pathbuf, 0); 6125 kmem_free(pathbuf, MAXPATHLEN); 6126 return (DDI_WALK_CONTINUE); 6127 } 6128 6129 static int 6130 pm_kept_walk(dev_info_t *dip, void *arg) 6131 { 6132 _NOTE(ARGUNUSED(arg)) 6133 char *pathbuf; 6134 6135 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 6136 (void) ddi_pathname(dip, pathbuf); 6137 (void) pm_kept(pathbuf); 6138 kmem_free(pathbuf, MAXPATHLEN); 6139 6140 return (DDI_WALK_CONTINUE); 6141 } 6142 6143 static int 6144 pm_keeper_walk(dev_info_t *dip, void *arg) 6145 { 6146 _NOTE(ARGUNUSED(arg)) 6147 char *pathbuf; 6148 6149 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 6150 (void) ddi_pathname(dip, pathbuf); 6151 (void) pm_keeper(pathbuf); 6152 kmem_free(pathbuf, MAXPATHLEN); 6153 6154 return (DDI_WALK_CONTINUE); 6155 } 6156 6157 static char * 6158 pdw_type_decode(int type) 6159 { 6160 switch (type) { 6161 case PM_DEP_WK_POWER_ON: 6162 return ("power on"); 6163 case PM_DEP_WK_POWER_OFF: 6164 return ("power off"); 6165 case PM_DEP_WK_DETACH: 6166 return ("detach"); 6167 case PM_DEP_WK_REMOVE_DEP: 6168 return ("remove dep"); 6169 case PM_DEP_WK_BRINGUP_SELF: 6170 return ("bringup self"); 6171 case PM_DEP_WK_RECORD_KEEPER: 6172 return ("add dependent"); 6173 case PM_DEP_WK_RECORD_KEEPER_PROP: 6174 return ("add dependent property"); 6175 case PM_DEP_WK_KEPT: 6176 return ("kept"); 6177 case PM_DEP_WK_KEEPER: 6178 return ("keeper"); 6179 case PM_DEP_WK_ATTACH: 6180 return ("attach"); 6181 case PM_DEP_WK_CHECK_KEPT: 6182 return ("check kept"); 6183 case PM_DEP_WK_CPR_SUSPEND: 6184 return ("suspend"); 6185 case PM_DEP_WK_CPR_RESUME: 6186 return ("resume"); 6187 default: 6188 return ("unknown"); 6189 } 6190 6191 } 6192 6193 static void 6194 pm_rele_dep(char *keeper) 6195 { 6196 PMD_FUNC(pmf, "rele_dep") 6197 pm_pdr_t *dp; 6198 char *kept_path = NULL; 6199 dev_info_t *kept = NULL; 6200 int count = 0; 6201 6202 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 6203 if (strcmp(dp->pdr_keeper, keeper) != 0) 6204 continue; 6205 for (count = 0; count < dp->pdr_kept_count; count++) { 6206 kept_path = dp->pdr_kept_paths[count]; 6207 if (kept_path == NULL) 6208 continue; 6209 kept = pm_name_to_dip(kept_path, 1); 6210 if (kept) { 6211 PMD(PMD_KEEPS, ("%s: release kept=%s@%s(%s#%d) " 6212 "of keeper=%s\n", pmf, PM_DEVICE(kept), 6213 keeper)) 6214 ASSERT(DEVI(kept)->devi_pm_kidsupcnt > 0); 6215 pm_rele_power(kept); 6216 ddi_release_devi(kept); 6217 } 6218 } 6219 } 6220 } 6221 6222 /* 6223 * Called when we are just released from direct PM. Bring ourself up 6224 * if our keeper is up since dependency is not honored while a kept 6225 * device is under direct PM. 6226 */ 6227 static void 6228 pm_bring_self_up(char *keptpath) 6229 { 6230 PMD_FUNC(pmf, "bring_self_up") 6231 dev_info_t *kept; 6232 dev_info_t *keeper; 6233 pm_pdr_t *dp; 6234 int i, j; 6235 int up = 0, circ; 6236 6237 kept = pm_name_to_dip(keptpath, 1); 6238 if (kept == NULL) 6239 return; 6240 PMD(PMD_KEEPS, ("%s: kept=%s@%s(%s#%d)\n", pmf, PM_DEVICE(kept))) 6241 for (dp = pm_dep_head; dp; dp = dp->pdr_next) { 6242 if (dp->pdr_kept_count == 0) 6243 continue; 6244 for (i = 0; i < dp->pdr_kept_count; i++) { 6245 if (strcmp(dp->pdr_kept_paths[i], keptpath) != 0) 6246 continue; 6247 keeper = pm_name_to_dip(dp->pdr_keeper, 1); 6248 if (keeper) { 6249 PMD(PMD_KEEPS, ("%s: keeper=%s@%s(%s#%d)\n", 6250 pmf, PM_DEVICE(keeper))) 6251 PM_LOCK_POWER(keeper, &circ); 6252 for (j = 0; j < PM_NUMCMPTS(keeper); 6253 j++) { 6254 if (PM_CURPOWER(keeper, j)) { 6255 PMD(PMD_KEEPS, ("%s: comp=" 6256 "%d is up\n", pmf, j)) 6257 up++; 6258 } 6259 } 6260 if (up) { 6261 if (PM_SKBU(kept)) 6262 DEVI(kept)->devi_pm_flags &= 6263 ~PMC_SKIP_BRINGUP; 6264 bring_pmdep_up(kept, 1); 6265 } 6266 PM_UNLOCK_POWER(keeper, circ); 6267 ddi_release_devi(keeper); 6268 } 6269 } 6270 } 6271 ddi_release_devi(kept); 6272 } 6273 6274 static void 6275 pm_process_dep_request(pm_dep_wk_t *work) 6276 { 6277 PMD_FUNC(pmf, "dep_req") 6278 int ret; 6279 6280 PMD(PMD_DEP, ("%s: work=%s\n", pmf, 6281 pdw_type_decode(work->pdw_type))) 6282 PMD(PMD_DEP, ("%s: keeper=%s, kept=%s\n", pmf, 6283 (work->pdw_keeper ? work->pdw_keeper : "NULL"), 6284 (work->pdw_kept ? work->pdw_kept : "NULL"))) 6285 6286 switch (work->pdw_type) { 6287 case PM_DEP_WK_POWER_ON: 6288 /* Bring up the kept devices and put a hold on them */ 6289 bring_wekeeps_up(work->pdw_keeper); 6290 break; 6291 case PM_DEP_WK_POWER_OFF: 6292 /* Release the kept devices */ 6293 pm_rele_dep(work->pdw_keeper); 6294 break; 6295 case PM_DEP_WK_DETACH: 6296 pm_free_keeps(work->pdw_keeper, work->pdw_pwr); 6297 break; 6298 case PM_DEP_WK_REMOVE_DEP: 6299 pm_discard_dependencies(); 6300 break; 6301 case PM_DEP_WK_BRINGUP_SELF: 6302 /* 6303 * We deferred satisfying our dependency till now, so satisfy 6304 * it again and bring ourselves up. 6305 */ 6306 pm_bring_self_up(work->pdw_kept); 6307 break; 6308 case PM_DEP_WK_RECORD_KEEPER: 6309 (void) pm_record_keeper(work->pdw_kept, work->pdw_keeper, 0); 6310 ddi_walk_devs(ddi_root_node(), pm_kept_walk, NULL); 6311 ddi_walk_devs(ddi_root_node(), pm_keeper_walk, NULL); 6312 break; 6313 case PM_DEP_WK_RECORD_KEEPER_PROP: 6314 (void) pm_record_keeper(work->pdw_kept, work->pdw_keeper, 1); 6315 ddi_walk_devs(ddi_root_node(), pm_keeper_walk, NULL); 6316 ddi_walk_devs(ddi_root_node(), pm_kept_walk, NULL); 6317 break; 6318 case PM_DEP_WK_KEPT: 6319 ret = pm_kept(work->pdw_kept); 6320 PMD(PMD_DEP, ("%s: PM_DEP_WK_KEPT: pm_kept returns %d\n", pmf, 6321 ret)) 6322 break; 6323 case PM_DEP_WK_KEEPER: 6324 ret = pm_keeper(work->pdw_keeper); 6325 PMD(PMD_DEP, ("%s: PM_DEP_WK_KEEPER: pm_keeper returns %d\n", 6326 pmf, ret)) 6327 break; 6328 case PM_DEP_WK_ATTACH: 6329 ret = pm_keeper(work->pdw_keeper); 6330 PMD(PMD_DEP, ("%s: PM_DEP_WK_ATTACH: pm_keeper returns %d\n", 6331 pmf, ret)) 6332 ret = pm_kept(work->pdw_kept); 6333 PMD(PMD_DEP, ("%s: PM_DEP_WK_ATTACH: pm_kept returns %d\n", 6334 pmf, ret)) 6335 break; 6336 case PM_DEP_WK_CHECK_KEPT: 6337 ret = pm_is_kept(work->pdw_kept); 6338 PMD(PMD_DEP, ("%s: PM_DEP_WK_CHECK_KEPT: kept=%s, ret=%d\n", 6339 pmf, work->pdw_kept, ret)) 6340 break; 6341 case PM_DEP_WK_CPR_SUSPEND: 6342 pm_discard_dependencies(); 6343 break; 6344 case PM_DEP_WK_CPR_RESUME: 6345 ddi_walk_devs(ddi_root_node(), pm_kept_walk, NULL); 6346 ddi_walk_devs(ddi_root_node(), pm_keeper_walk, NULL); 6347 break; 6348 default: 6349 ASSERT(0); 6350 break; 6351 } 6352 /* 6353 * Free the work structure if the requester is not waiting 6354 * Otherwise it is the requester's responsiblity to free it. 6355 */ 6356 if (!work->pdw_wait) { 6357 if (work->pdw_keeper) 6358 kmem_free(work->pdw_keeper, 6359 strlen(work->pdw_keeper) + 1); 6360 if (work->pdw_kept) 6361 kmem_free(work->pdw_kept, strlen(work->pdw_kept) + 1); 6362 kmem_free(work, sizeof (pm_dep_wk_t)); 6363 } else { 6364 /* 6365 * Notify requester if it is waiting for it. 6366 */ 6367 work->pdw_ret = ret; 6368 work->pdw_done = 1; 6369 cv_signal(&work->pdw_cv); 6370 } 6371 } 6372 6373 /* 6374 * Process PM dependency requests. 6375 */ 6376 static void 6377 pm_dep_thread(void) 6378 { 6379 pm_dep_wk_t *work; 6380 callb_cpr_t cprinfo; 6381 6382 CALLB_CPR_INIT(&cprinfo, &pm_dep_thread_lock, callb_generic_cpr, 6383 "pm_dep_thread"); 6384 for (;;) { 6385 mutex_enter(&pm_dep_thread_lock); 6386 if (pm_dep_thread_workq == NULL) { 6387 CALLB_CPR_SAFE_BEGIN(&cprinfo); 6388 cv_wait(&pm_dep_thread_cv, &pm_dep_thread_lock); 6389 CALLB_CPR_SAFE_END(&cprinfo, &pm_dep_thread_lock); 6390 } 6391 work = pm_dep_thread_workq; 6392 pm_dep_thread_workq = work->pdw_next; 6393 if (pm_dep_thread_tail == work) 6394 pm_dep_thread_tail = work->pdw_next; 6395 mutex_exit(&pm_dep_thread_lock); 6396 pm_process_dep_request(work); 6397 6398 } 6399 /*NOTREACHED*/ 6400 } 6401 6402 /* 6403 * Set the power level of the indicated device to unknown (if it is not a 6404 * backwards compatible device), as it has just been resumed, and it won't 6405 * know if the power was removed or not. Adjust parent's kidsupcnt if necessary. 6406 */ 6407 void 6408 pm_forget_power_level(dev_info_t *dip) 6409 { 6410 dev_info_t *pdip = ddi_get_parent(dip); 6411 int i, count = 0; 6412 6413 if (!PM_ISBC(dip)) { 6414 for (i = 0; i < PM_NUMCMPTS(dip); i++) 6415 count += (PM_CURPOWER(dip, i) == 0); 6416 6417 if (count && pdip && !PM_WANTS_NOTIFICATION(pdip)) 6418 e_pm_hold_rele_power(pdip, count); 6419 6420 /* 6421 * Count this as a power cycle if we care 6422 */ 6423 if (DEVI(dip)->devi_pm_volpmd && 6424 PM_CP(dip, 0)->pmc_cur_pwr == 0) 6425 DEVI(dip)->devi_pm_volpmd = 0; 6426 for (i = 0; i < PM_NUMCMPTS(dip); i++) 6427 e_pm_set_cur_pwr(dip, PM_CP(dip, i), PM_LEVEL_UNKNOWN); 6428 } 6429 } 6430 6431 /* 6432 * This function advises the caller whether it should make a power-off 6433 * transition at this time or not. If the transition is not advised 6434 * at this time, the time that the next power-off transition can 6435 * be made from now is returned through "intervalp" pointer. 6436 * This function returns: 6437 * 6438 * 1 power-off advised 6439 * 0 power-off not advised, intervalp will point to seconds from 6440 * now that a power-off is advised. If it is passed the number 6441 * of years that policy specifies the device should last, 6442 * a large number is returned as the time interval. 6443 * -1 error 6444 */ 6445 int 6446 pm_trans_check(struct pm_trans_data *datap, time_t *intervalp) 6447 { 6448 PMD_FUNC(pmf, "pm_trans_check") 6449 char dbuf[DC_SCSI_MFR_LEN]; 6450 struct pm_scsi_cycles *scp; 6451 int service_years, service_weeks, full_years; 6452 time_t now, service_seconds, tdiff; 6453 time_t within_year, when_allowed; 6454 char *ptr; 6455 int lower_bound_cycles, upper_bound_cycles, cycles_allowed; 6456 int cycles_diff, cycles_over; 6457 6458 if (datap == NULL) { 6459 PMD(PMD_TCHECK, ("%s: NULL data pointer!\n", pmf)) 6460 return (-1); 6461 } 6462 6463 if (datap->format == DC_SCSI_FORMAT) { 6464 /* 6465 * Power cycles of the scsi drives are distributed 6466 * over 5 years with the following percentage ratio: 6467 * 6468 * 30%, 25%, 20%, 15%, and 10% 6469 * 6470 * The power cycle quota for each year is distributed 6471 * linearly through out the year. The equation for 6472 * determining the expected cycles is: 6473 * 6474 * e = a * (n / y) 6475 * 6476 * e = expected cycles 6477 * a = allocated cycles for this year 6478 * n = number of seconds since beginning of this year 6479 * y = number of seconds in a year 6480 * 6481 * Note that beginning of the year starts the day that 6482 * the drive has been put on service. 6483 * 6484 * If the drive has passed its expected cycles, we 6485 * can determine when it can start to power cycle 6486 * again to keep it on track to meet the 5-year 6487 * life expectancy. The equation for determining 6488 * when to power cycle is: 6489 * 6490 * w = y * (c / a) 6491 * 6492 * w = when it can power cycle again 6493 * y = number of seconds in a year 6494 * c = current number of cycles 6495 * a = allocated cycles for the year 6496 * 6497 */ 6498 char pcnt[DC_SCSI_NPY] = { 30, 55, 75, 90, 100 }; 6499 6500 scp = &datap->un.scsi_cycles; 6501 PMD(PMD_TCHECK, ("%s: format=%d, lifemax=%d, ncycles=%d, " 6502 "svc_date=%s, svc_flag=%d\n", pmf, datap->format, 6503 scp->lifemax, scp->ncycles, scp->svc_date, scp->flag)) 6504 if (scp->ncycles < 0 || scp->flag != 0) { 6505 PMD(PMD_TCHECK, ("%s: ncycles < 0 || flag != 0\n", pmf)) 6506 return (-1); 6507 } 6508 6509 if (scp->ncycles > scp->lifemax) { 6510 *intervalp = (LONG_MAX / hz); 6511 return (0); 6512 } 6513 6514 /* 6515 * convert service date to time_t 6516 */ 6517 bcopy(scp->svc_date, dbuf, DC_SCSI_YEAR_LEN); 6518 dbuf[DC_SCSI_YEAR_LEN] = '\0'; 6519 ptr = dbuf; 6520 service_years = stoi(&ptr) - EPOCH_YEAR; 6521 bcopy(&scp->svc_date[DC_SCSI_YEAR_LEN], dbuf, 6522 DC_SCSI_WEEK_LEN); 6523 dbuf[DC_SCSI_WEEK_LEN] = '\0'; 6524 6525 /* 6526 * scsi standard does not specify WW data, 6527 * could be (00-51) or (01-52) 6528 */ 6529 ptr = dbuf; 6530 service_weeks = stoi(&ptr); 6531 if (service_years < 0 || 6532 service_weeks < 0 || service_weeks > 52) { 6533 PMD(PMD_TCHECK, ("%s: service year %d and week %d\n", 6534 pmf, service_years, service_weeks)) 6535 return (-1); 6536 } 6537 6538 /* 6539 * calculate service date in seconds-since-epoch, 6540 * adding one day for each leap-year. 6541 * 6542 * (years-since-epoch + 2) fixes integer truncation, 6543 * example: (8) leap-years during [1972, 2000] 6544 * (2000 - 1970) = 30; and (30 + 2) / 4 = 8; 6545 */ 6546 service_seconds = (service_years * DC_SPY) + 6547 (service_weeks * DC_SPW) + 6548 (((service_years + 2) / 4) * DC_SPD); 6549 6550 now = gethrestime_sec(); 6551 /* 6552 * since the granularity of 'svc_date' is day not second, 6553 * 'now' should be rounded up to full day. 6554 */ 6555 now = ((now + DC_SPD -1) / DC_SPD) * DC_SPD; 6556 if (service_seconds > now) { 6557 PMD(PMD_TCHECK, ("%s: service date (%ld) later " 6558 "than now (%ld)!\n", pmf, service_seconds, now)) 6559 return (-1); 6560 } 6561 6562 tdiff = now - service_seconds; 6563 PMD(PMD_TCHECK, ("%s: age is %ld sec\n", pmf, tdiff)) 6564 6565 /* 6566 * NOTE - Leap years are not considered in the calculations 6567 * below. 6568 */ 6569 full_years = (tdiff / DC_SPY); 6570 if ((full_years >= DC_SCSI_NPY) && 6571 (scp->ncycles <= scp->lifemax)) 6572 return (1); 6573 6574 /* 6575 * Determine what is the normal cycle usage for the 6576 * device at the beginning and the end of this year. 6577 */ 6578 lower_bound_cycles = (!full_years) ? 0 : 6579 ((scp->lifemax * pcnt[full_years - 1]) / 100); 6580 upper_bound_cycles = (scp->lifemax * pcnt[full_years]) / 100; 6581 6582 if (scp->ncycles <= lower_bound_cycles) 6583 return (1); 6584 6585 /* 6586 * The linear slope that determines how many cycles 6587 * are allowed this year is number of seconds 6588 * passed this year over total number of seconds in a year. 6589 */ 6590 cycles_diff = (upper_bound_cycles - lower_bound_cycles); 6591 within_year = (tdiff % DC_SPY); 6592 cycles_allowed = lower_bound_cycles + 6593 (((uint64_t)cycles_diff * (uint64_t)within_year) / DC_SPY); 6594 PMD(PMD_TCHECK, ("%s: lived %d yrs and %ld secs\n", pmf, 6595 full_years, within_year)) 6596 PMD(PMD_TCHECK, ("%s: # of cycles allowed %d\n", pmf, 6597 cycles_allowed)) 6598 6599 if (scp->ncycles <= cycles_allowed) 6600 return (1); 6601 6602 /* 6603 * The transition is not advised now but we can 6604 * determine when the next transition can be made. 6605 * 6606 * Depending on how many cycles the device has been 6607 * over-used, we may need to skip years with 6608 * different percentage quota in order to determine 6609 * when the next transition can be made. 6610 */ 6611 cycles_over = (scp->ncycles - lower_bound_cycles); 6612 while (cycles_over > cycles_diff) { 6613 full_years++; 6614 if (full_years >= DC_SCSI_NPY) { 6615 *intervalp = (LONG_MAX / hz); 6616 return (0); 6617 } 6618 cycles_over -= cycles_diff; 6619 lower_bound_cycles = upper_bound_cycles; 6620 upper_bound_cycles = 6621 (scp->lifemax * pcnt[full_years]) / 100; 6622 cycles_diff = (upper_bound_cycles - lower_bound_cycles); 6623 } 6624 6625 /* 6626 * The linear slope that determines when the next transition 6627 * can be made is the relative position of used cycles within a 6628 * year over total number of cycles within that year. 6629 */ 6630 when_allowed = service_seconds + (full_years * DC_SPY) + 6631 (((uint64_t)DC_SPY * (uint64_t)cycles_over) / cycles_diff); 6632 *intervalp = (when_allowed - now); 6633 if (*intervalp > (LONG_MAX / hz)) 6634 *intervalp = (LONG_MAX / hz); 6635 PMD(PMD_TCHECK, ("%s: no cycle is allowed in %ld secs\n", pmf, 6636 *intervalp)) 6637 return (0); 6638 } 6639 6640 PMD(PMD_TCHECK, ("%s: unknown format!\n", pmf)) 6641 return (-1); 6642 } 6643 6644 /* 6645 * Nexus drivers call into pm framework to indicate which child driver is about 6646 * to be installed. In some platforms, ppm may need to configure the hardware 6647 * for successful installation of a driver. 6648 */ 6649 int 6650 pm_init_child(dev_info_t *dip) 6651 { 6652 power_req_t power_req; 6653 6654 ASSERT(ddi_binding_name(dip)); 6655 ASSERT(ddi_get_name_addr(dip)); 6656 pm_ppm_claim(dip); 6657 if (pm_ppm_claimed(dip)) { /* if ppm driver claims the node */ 6658 power_req.request_type = PMR_PPM_INIT_CHILD; 6659 power_req.req.ppm_config_req.who = dip; 6660 ASSERT(PPM(dip) != NULL); 6661 return (pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, &power_req, 6662 NULL)); 6663 } else { 6664 #ifdef DEBUG 6665 /* pass it to the default handler so we can debug things */ 6666 power_req.request_type = PMR_PPM_INIT_CHILD; 6667 power_req.req.ppm_config_req.who = dip; 6668 (void) pm_ctlops(NULL, dip, 6669 DDI_CTLOPS_POWER, &power_req, NULL); 6670 #endif 6671 } 6672 return (DDI_SUCCESS); 6673 } 6674 6675 /* 6676 * Bring parent of a node that is about to be probed up to full power, and 6677 * arrange for it to stay up until pm_post_probe() or pm_post_attach() decide 6678 * it is time to let it go down again 6679 */ 6680 void 6681 pm_pre_probe(dev_info_t *dip, pm_ppm_cookie_t *cp) 6682 { 6683 int result; 6684 power_req_t power_req; 6685 6686 bzero(cp, sizeof (*cp)); 6687 cp->ppc_dip = dip; 6688 6689 pm_ppm_claim(dip); 6690 if (pm_ppm_claimed(dip)) { /* if ppm driver claims the node */ 6691 power_req.request_type = PMR_PPM_PRE_PROBE; 6692 power_req.req.ppm_config_req.who = dip; 6693 ASSERT(PPM(dip) != NULL); 6694 (void) pm_ctlops(PPM(dip), dip, 6695 DDI_CTLOPS_POWER, &power_req, &result); 6696 cp->ppc_ppm = PPM(dip); 6697 } else { 6698 #ifdef DEBUG 6699 /* pass it to the default handler so we can debug things */ 6700 power_req.request_type = PMR_PPM_PRE_PROBE; 6701 power_req.req.ppm_config_req.who = dip; 6702 (void) pm_ctlops(NULL, dip, 6703 DDI_CTLOPS_POWER, &power_req, &result); 6704 #endif 6705 cp->ppc_ppm = NULL; 6706 } 6707 } 6708 6709 int 6710 pm_pre_config(dev_info_t *dip, char *devnm) 6711 { 6712 PMD_FUNC(pmf, "pre_config") 6713 int ret; 6714 6715 if (MDI_VHCI(dip)) { 6716 PMD(PMD_SET, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 6717 ret = mdi_power(dip, MDI_PM_PRE_CONFIG, NULL, devnm, 0); 6718 return (ret == MDI_SUCCESS ? DDI_SUCCESS : DDI_FAILURE); 6719 } else if (!PM_GET_PM_INFO(dip)) 6720 return (DDI_SUCCESS); 6721 6722 PMD(PMD_SET, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 6723 pm_hold_power(dip); 6724 ret = pm_all_to_normal(dip, PM_CANBLOCK_BLOCK); 6725 if (ret != DDI_SUCCESS) 6726 pm_rele_power(dip); 6727 return (ret); 6728 } 6729 6730 /* 6731 * This routine is called by devfs during its walk to unconfigue a node. 6732 * If the call is due to auto mod_unloads and the dip is not at its 6733 * full power, we return DDI_FAILURE to terminate the walk, otherwise 6734 * return DDI_SUCCESS. 6735 */ 6736 int 6737 pm_pre_unconfig(dev_info_t *dip, int flags, int *held, char *devnm) 6738 { 6739 PMD_FUNC(pmf, "pre_unconfig") 6740 int ret; 6741 6742 if (MDI_VHCI(dip)) { 6743 PMD(PMD_SET, ("%s: %s@%s(%s#%d), flags=%x\n", pmf, 6744 PM_DEVICE(dip), flags)) 6745 ret = mdi_power(dip, MDI_PM_PRE_UNCONFIG, held, devnm, flags); 6746 return (ret == MDI_SUCCESS ? DDI_SUCCESS : DDI_FAILURE); 6747 } else if (!PM_GET_PM_INFO(dip)) 6748 return (DDI_SUCCESS); 6749 6750 PMD(PMD_SET, ("%s: %s@%s(%s#%d), flags=%x\n", pmf, PM_DEVICE(dip), 6751 flags)) 6752 *held = 0; 6753 6754 /* 6755 * If the dip is a leaf node, don't power it up. 6756 */ 6757 if (!ddi_get_child(dip)) 6758 return (DDI_SUCCESS); 6759 6760 /* 6761 * Do not power up the node if it is called due to auto-modunload. 6762 */ 6763 if ((flags & NDI_AUTODETACH) && !pm_all_at_normal(dip)) 6764 return (DDI_FAILURE); 6765 6766 pm_hold_power(dip); 6767 *held = 1; 6768 ret = pm_all_to_normal(dip, PM_CANBLOCK_BLOCK); 6769 if (ret != DDI_SUCCESS) { 6770 pm_rele_power(dip); 6771 *held = 0; 6772 } 6773 return (ret); 6774 } 6775 6776 /* 6777 * Notify ppm of attach action. Parent is already held at full power by 6778 * probe action. 6779 */ 6780 void 6781 pm_pre_attach(dev_info_t *dip, pm_ppm_cookie_t *cp, ddi_attach_cmd_t cmd) 6782 { 6783 static char *me = "pm_pre_attach"; 6784 power_req_t power_req; 6785 int result; 6786 6787 /* 6788 * Initialize and fill in the PPM cookie 6789 */ 6790 bzero(cp, sizeof (*cp)); 6791 cp->ppc_cmd = (int)cmd; 6792 cp->ppc_ppm = PPM(dip); 6793 cp->ppc_dip = dip; 6794 6795 /* 6796 * DDI_ATTACH and DDI_RESUME cmds need to call platform specific 6797 * Power Management stuff. DDI_RESUME also has to purge it's 6798 * powerlevel information. 6799 */ 6800 switch (cmd) { 6801 case DDI_ATTACH: 6802 if (cp->ppc_ppm) { /* if ppm driver claims the node */ 6803 power_req.request_type = PMR_PPM_PRE_ATTACH; 6804 power_req.req.ppm_config_req.who = dip; 6805 ASSERT(PPM(dip)); 6806 (void) pm_ctlops(cp->ppc_ppm, dip, DDI_CTLOPS_POWER, 6807 &power_req, &result); 6808 } 6809 #ifdef DEBUG 6810 else { 6811 power_req.request_type = PMR_PPM_PRE_ATTACH; 6812 power_req.req.ppm_config_req.who = dip; 6813 (void) pm_ctlops(NULL, dip, 6814 DDI_CTLOPS_POWER, &power_req, &result); 6815 } 6816 #endif 6817 break; 6818 case DDI_RESUME: 6819 pm_forget_power_level(dip); 6820 6821 if (cp->ppc_ppm) { /* if ppm driver claims the node */ 6822 power_req.request_type = PMR_PPM_PRE_RESUME; 6823 power_req.req.resume_req.who = cp->ppc_dip; 6824 power_req.req.resume_req.cmd = 6825 (ddi_attach_cmd_t)cp->ppc_cmd; 6826 ASSERT(PPM(cp->ppc_dip) == cp->ppc_ppm); 6827 (void) pm_ctlops(cp->ppc_ppm, cp->ppc_dip, 6828 DDI_CTLOPS_POWER, &power_req, &result); 6829 } 6830 #ifdef DEBUG 6831 else { 6832 power_req.request_type = PMR_PPM_PRE_RESUME; 6833 power_req.req.resume_req.who = cp->ppc_dip; 6834 power_req.req.resume_req.cmd = 6835 (ddi_attach_cmd_t)cp->ppc_cmd; 6836 (void) pm_ctlops(NULL, cp->ppc_dip, 6837 DDI_CTLOPS_POWER, &power_req, &result); 6838 } 6839 #endif 6840 break; 6841 6842 case DDI_PM_RESUME: 6843 break; 6844 6845 default: 6846 panic(me); 6847 } 6848 } 6849 6850 /* 6851 * Nexus drivers call into pm framework to indicate which child driver is 6852 * being uninstalled. In some platforms, ppm may need to reconfigure the 6853 * hardware since the device driver is no longer installed. 6854 */ 6855 int 6856 pm_uninit_child(dev_info_t *dip) 6857 { 6858 power_req_t power_req; 6859 6860 ASSERT(ddi_binding_name(dip)); 6861 ASSERT(ddi_get_name_addr(dip)); 6862 pm_ppm_claim(dip); 6863 if (pm_ppm_claimed(dip)) { /* if ppm driver claims the node */ 6864 power_req.request_type = PMR_PPM_UNINIT_CHILD; 6865 power_req.req.ppm_config_req.who = dip; 6866 ASSERT(PPM(dip)); 6867 return (pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, &power_req, 6868 NULL)); 6869 } else { 6870 #ifdef DEBUG 6871 /* pass it to the default handler so we can debug things */ 6872 power_req.request_type = PMR_PPM_UNINIT_CHILD; 6873 power_req.req.ppm_config_req.who = dip; 6874 (void) pm_ctlops(NULL, dip, DDI_CTLOPS_POWER, &power_req, NULL); 6875 #endif 6876 } 6877 return (DDI_SUCCESS); 6878 } 6879 /* 6880 * Decrement kidsupcnt so scan can turn the parent back off if it is idle 6881 * Also notify ppm of result of probe if there is a ppm that cares 6882 */ 6883 void 6884 pm_post_probe(pm_ppm_cookie_t *cp, int ret, int probe_failed) 6885 { 6886 _NOTE(ARGUNUSED(probe_failed)) 6887 int result; 6888 power_req_t power_req; 6889 6890 if (cp->ppc_ppm) { /* if ppm driver claims the node */ 6891 power_req.request_type = PMR_PPM_POST_PROBE; 6892 power_req.req.ppm_config_req.who = cp->ppc_dip; 6893 power_req.req.ppm_config_req.result = ret; 6894 ASSERT(PPM(cp->ppc_dip) == cp->ppc_ppm); 6895 (void) pm_ctlops(cp->ppc_ppm, cp->ppc_dip, DDI_CTLOPS_POWER, 6896 &power_req, &result); 6897 } 6898 #ifdef DEBUG 6899 else { 6900 power_req.request_type = PMR_PPM_POST_PROBE; 6901 power_req.req.ppm_config_req.who = cp->ppc_dip; 6902 power_req.req.ppm_config_req.result = ret; 6903 (void) pm_ctlops(NULL, cp->ppc_dip, DDI_CTLOPS_POWER, 6904 &power_req, &result); 6905 } 6906 #endif 6907 } 6908 6909 void 6910 pm_post_config(dev_info_t *dip, char *devnm) 6911 { 6912 PMD_FUNC(pmf, "post_config") 6913 6914 if (MDI_VHCI(dip)) { 6915 PMD(PMD_SET, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 6916 (void) mdi_power(dip, MDI_PM_POST_CONFIG, NULL, devnm, 0); 6917 return; 6918 } else if (!PM_GET_PM_INFO(dip)) 6919 return; 6920 6921 PMD(PMD_SET, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 6922 pm_rele_power(dip); 6923 } 6924 6925 void 6926 pm_post_unconfig(dev_info_t *dip, int held, char *devnm) 6927 { 6928 PMD_FUNC(pmf, "post_unconfig") 6929 6930 if (MDI_VHCI(dip)) { 6931 PMD(PMD_SET, ("%s: %s@%s(%s#%d), held = %d\n", pmf, 6932 PM_DEVICE(dip), held)) 6933 (void) mdi_power(dip, MDI_PM_POST_UNCONFIG, &held, devnm, 0); 6934 return; 6935 } else if (!PM_GET_PM_INFO(dip)) 6936 return; 6937 6938 PMD(PMD_SET, ("%s: %s@%s(%s#%d), held = %d\n", pmf, PM_DEVICE(dip), 6939 held)) 6940 if (!held) 6941 return; 6942 /* 6943 * We have held power in pre_unconfig, release it here. 6944 */ 6945 pm_rele_power(dip); 6946 } 6947 6948 /* 6949 * Notify ppm of result of attach if there is a ppm that cares 6950 */ 6951 void 6952 pm_post_attach(pm_ppm_cookie_t *cp, int ret) 6953 { 6954 int result; 6955 power_req_t power_req; 6956 dev_info_t *dip; 6957 6958 if (cp->ppc_cmd != DDI_ATTACH) 6959 return; 6960 6961 dip = cp->ppc_dip; 6962 6963 if (ret == DDI_SUCCESS) { 6964 /* 6965 * Attach succeeded, so proceed to doing post-attach pm tasks 6966 */ 6967 if (PM_GET_PM_INFO(dip) == NULL) 6968 (void) pm_start(dip); 6969 } else { 6970 /* 6971 * Attach may have got pm started before failing 6972 */ 6973 pm_stop(dip); 6974 } 6975 6976 if (cp->ppc_ppm) { /* if ppm driver claims the node */ 6977 power_req.request_type = PMR_PPM_POST_ATTACH; 6978 power_req.req.ppm_config_req.who = cp->ppc_dip; 6979 power_req.req.ppm_config_req.result = ret; 6980 ASSERT(PPM(cp->ppc_dip) == cp->ppc_ppm); 6981 (void) pm_ctlops(cp->ppc_ppm, cp->ppc_dip, 6982 DDI_CTLOPS_POWER, &power_req, &result); 6983 } 6984 #ifdef DEBUG 6985 else { 6986 power_req.request_type = PMR_PPM_POST_ATTACH; 6987 power_req.req.ppm_config_req.who = cp->ppc_dip; 6988 power_req.req.ppm_config_req.result = ret; 6989 (void) pm_ctlops(NULL, cp->ppc_dip, 6990 DDI_CTLOPS_POWER, &power_req, &result); 6991 } 6992 #endif 6993 } 6994 6995 /* 6996 * Notify ppm of attach action. Parent is already held at full power by 6997 * probe action. 6998 */ 6999 void 7000 pm_pre_detach(dev_info_t *dip, ddi_detach_cmd_t cmd, pm_ppm_cookie_t *cp) 7001 { 7002 int result; 7003 power_req_t power_req; 7004 7005 bzero(cp, sizeof (*cp)); 7006 cp->ppc_dip = dip; 7007 cp->ppc_cmd = (int)cmd; 7008 7009 switch (cmd) { 7010 case DDI_DETACH: 7011 pm_detaching(dip); /* suspend pm while detaching */ 7012 if (pm_ppm_claimed(dip)) { /* if ppm driver claims node */ 7013 power_req.request_type = PMR_PPM_PRE_DETACH; 7014 power_req.req.ppm_config_req.who = dip; 7015 ASSERT(PPM(dip)); 7016 (void) pm_ctlops(PPM(dip), dip, DDI_CTLOPS_POWER, 7017 &power_req, &result); 7018 cp->ppc_ppm = PPM(dip); 7019 } else { 7020 #ifdef DEBUG 7021 /* pass to the default handler so we can debug things */ 7022 power_req.request_type = PMR_PPM_PRE_DETACH; 7023 power_req.req.ppm_config_req.who = dip; 7024 (void) pm_ctlops(NULL, dip, 7025 DDI_CTLOPS_POWER, &power_req, &result); 7026 #endif 7027 cp->ppc_ppm = NULL; 7028 } 7029 break; 7030 7031 default: 7032 break; 7033 } 7034 } 7035 7036 /* 7037 * Dip is either a leaf node that exported "no-involuntary-power-cycles" prop., 7038 * (if devi_pm_noinvol count is 0) or an ancestor of such a node. We need to 7039 * make an entry to record the details, which includes certain flag settings. 7040 */ 7041 static void 7042 pm_record_invol_path(char *path, int flags, int noinvolpm, int volpmd, 7043 int wasvolpmd, major_t major) 7044 { 7045 PMD_FUNC(pmf, "record_invol_path") 7046 major_t pm_path_to_major(char *); 7047 size_t plen; 7048 pm_noinvol_t *ip, *np, *pp; 7049 pp = NULL; 7050 7051 plen = strlen(path) + 1; 7052 np = kmem_zalloc(sizeof (*np), KM_SLEEP); 7053 np->ni_size = plen; 7054 np->ni_path = kmem_alloc(plen, KM_SLEEP); 7055 np->ni_noinvolpm = noinvolpm; 7056 np->ni_volpmd = volpmd; 7057 np->ni_wasvolpmd = wasvolpmd; 7058 np->ni_flags = flags; 7059 (void) strcpy(np->ni_path, path); 7060 /* 7061 * If we haven't actually seen the node attached, it is hard to figure 7062 * out its major. If we could hold the node by path, we would be much 7063 * happier here. 7064 */ 7065 if (major == (major_t)-1) { 7066 np->ni_major = pm_path_to_major(path); 7067 } else { 7068 np->ni_major = major; 7069 } 7070 rw_enter(&pm_noinvol_rwlock, RW_WRITER); 7071 for (ip = pm_noinvol_head; ip; pp = ip, ip = ip->ni_next) { 7072 int comp = strcmp(path, ip->ni_path); 7073 if (comp < 0) { 7074 PMD(PMD_NOINVOL, ("%s: %s insert before %s\n", 7075 pmf, path, ip->ni_path)) 7076 /* insert before current entry */ 7077 np->ni_next = ip; 7078 if (pp) { 7079 pp->ni_next = np; 7080 } else { 7081 pm_noinvol_head = np; 7082 } 7083 rw_exit(&pm_noinvol_rwlock); 7084 #ifdef DEBUG 7085 if (pm_debug & PMD_NOINVOL) 7086 pr_noinvol("record_invol_path exit0"); 7087 #endif 7088 return; 7089 } else if (comp == 0) { 7090 panic("%s already in pm_noinvol list", path); 7091 } 7092 } 7093 /* 7094 * If we did not find an entry in the list that this should go before, 7095 * then it must go at the end 7096 */ 7097 if (pp) { 7098 PMD(PMD_NOINVOL, ("%s: %s append after %s\n", pmf, path, 7099 pp->ni_path)) 7100 ASSERT(pp->ni_next == 0); 7101 pp->ni_next = np; 7102 } else { 7103 PMD(PMD_NOINVOL, ("%s: %s added to end-of-list\n", pmf, path)) 7104 ASSERT(!pm_noinvol_head); 7105 pm_noinvol_head = np; 7106 } 7107 rw_exit(&pm_noinvol_rwlock); 7108 #ifdef DEBUG 7109 if (pm_debug & PMD_NOINVOL) 7110 pr_noinvol("record_invol_path exit"); 7111 #endif 7112 } 7113 7114 void 7115 pm_record_invol(dev_info_t *dip) 7116 { 7117 char *pathbuf; 7118 int pm_all_components_off(dev_info_t *); 7119 int volpmd = (PM_NUMCMPTS(dip) > 0) && pm_all_components_off(dip); 7120 7121 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 7122 (void) ddi_pathname(dip, pathbuf); 7123 7124 pm_record_invol_path(pathbuf, (DEVI(dip)->devi_pm_flags & 7125 (PMC_NO_INVOL | PMC_CONSOLE_FB)), DEVI(dip)->devi_pm_noinvolpm, 7126 DEVI(dip)->devi_pm_volpmd, volpmd, PM_MAJOR(dip)); 7127 7128 /* 7129 * If this child's detach will be holding up its ancestors, then we 7130 * allow for an exception to that if all children of this type have 7131 * gone down voluntarily. 7132 * Now walk down the tree incrementing devi_pm_noinvolpm 7133 */ 7134 (void) pm_noinvol_update(PM_BP_NOINVOL_DETACH, 0, volpmd, pathbuf, 7135 dip); 7136 kmem_free(pathbuf, MAXPATHLEN); 7137 } 7138 7139 void 7140 pm_post_detach(pm_ppm_cookie_t *cp, int ret) 7141 { 7142 dev_info_t *dip = cp->ppc_dip; 7143 int result; 7144 power_req_t power_req; 7145 7146 switch (cp->ppc_cmd) { 7147 case DDI_DETACH: 7148 if (cp->ppc_ppm) { /* if ppm driver claims the node */ 7149 power_req.request_type = PMR_PPM_POST_DETACH; 7150 power_req.req.ppm_config_req.who = cp->ppc_dip; 7151 power_req.req.ppm_config_req.result = ret; 7152 ASSERT(PPM(cp->ppc_dip) == cp->ppc_ppm); 7153 (void) pm_ctlops(cp->ppc_ppm, cp->ppc_dip, 7154 DDI_CTLOPS_POWER, &power_req, &result); 7155 } 7156 #ifdef DEBUG 7157 else { 7158 power_req.request_type = PMR_PPM_POST_DETACH; 7159 power_req.req.ppm_config_req.who = cp->ppc_dip; 7160 power_req.req.ppm_config_req.result = ret; 7161 (void) pm_ctlops(NULL, cp->ppc_dip, 7162 DDI_CTLOPS_POWER, &power_req, &result); 7163 } 7164 #endif 7165 if (ret == DDI_SUCCESS) { 7166 /* 7167 * For hotplug detach we assume it is *really* gone 7168 */ 7169 if (cp->ppc_cmd == DDI_DETACH && 7170 ((DEVI(dip)->devi_pm_flags & 7171 (PMC_NO_INVOL | PMC_CONSOLE_FB)) || 7172 DEVI(dip)->devi_pm_noinvolpm)) 7173 pm_record_invol(dip); 7174 DEVI(dip)->devi_pm_flags &= 7175 ~(PMC_NO_INVOL | PMC_NOINVOL_DONE); 7176 7177 /* 7178 * If console fb is detaching, then we don't need to 7179 * worry any more about it going off (pm_detaching has 7180 * brought up all components) 7181 */ 7182 if (PM_IS_CFB(dip)) { 7183 mutex_enter(&pm_cfb_lock); 7184 ASSERT(cfb_dip_detaching); 7185 ASSERT(cfb_dip == NULL); 7186 ASSERT(pm_cfb_comps_off == 0); 7187 cfb_dip_detaching = NULL; 7188 mutex_exit(&pm_cfb_lock); 7189 } 7190 pm_stop(dip); /* make it permanent */ 7191 } else { 7192 if (PM_IS_CFB(dip)) { 7193 mutex_enter(&pm_cfb_lock); 7194 ASSERT(cfb_dip_detaching); 7195 ASSERT(cfb_dip == NULL); 7196 ASSERT(pm_cfb_comps_off == 0); 7197 cfb_dip = cfb_dip_detaching; 7198 cfb_dip_detaching = NULL; 7199 mutex_exit(&pm_cfb_lock); 7200 } 7201 pm_detach_failed(dip); /* resume power management */ 7202 } 7203 break; 7204 case DDI_PM_SUSPEND: 7205 break; 7206 case DDI_SUSPEND: 7207 break; /* legal, but nothing to do */ 7208 default: 7209 #ifdef DEBUG 7210 panic("pm_post_detach: unrecognized cmd %d for detach", 7211 cp->ppc_cmd); 7212 /*NOTREACHED*/ 7213 #else 7214 break; 7215 #endif 7216 } 7217 } 7218 7219 /* 7220 * Called after vfs_mountroot has got the clock started to fix up timestamps 7221 * that were set when root bush drivers attached. hresttime was 0 then, so the 7222 * devices look busy but have a 0 busycnt 7223 */ 7224 int 7225 pm_adjust_timestamps(dev_info_t *dip, void *arg) 7226 { 7227 _NOTE(ARGUNUSED(arg)) 7228 7229 pm_info_t *info = PM_GET_PM_INFO(dip); 7230 struct pm_component *cp; 7231 int i; 7232 7233 if (!info) 7234 return (DDI_WALK_CONTINUE); 7235 PM_LOCK_BUSY(dip); 7236 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 7237 cp = PM_CP(dip, i); 7238 if (cp->pmc_timestamp == 0 && cp->pmc_busycount == 0) 7239 cp->pmc_timestamp = gethrestime_sec(); 7240 } 7241 PM_UNLOCK_BUSY(dip); 7242 return (DDI_WALK_CONTINUE); 7243 } 7244 7245 /* 7246 * Called at attach time to see if the device being attached has a record in 7247 * the no involuntary power cycles list. If so, we do some bookkeeping on the 7248 * parents and set a flag in the dip 7249 */ 7250 void 7251 pm_noinvol_specd(dev_info_t *dip) 7252 { 7253 PMD_FUNC(pmf, "noinvol_specd") 7254 char *pathbuf; 7255 pm_noinvol_t *ip, *pp = NULL; 7256 int wasvolpmd; 7257 int found = 0; 7258 7259 if (DEVI(dip)->devi_pm_flags & PMC_NOINVOL_DONE) 7260 return; 7261 DEVI(dip)->devi_pm_flags |= PMC_NOINVOL_DONE; 7262 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 7263 (void) ddi_pathname(dip, pathbuf); 7264 7265 PM_LOCK_DIP(dip); 7266 DEVI(dip)->devi_pm_volpmd = 0; 7267 DEVI(dip)->devi_pm_noinvolpm = 0; 7268 rw_enter(&pm_noinvol_rwlock, RW_READER); 7269 for (ip = pm_noinvol_head; ip; pp = ip, ip = ip->ni_next) { 7270 PMD(PMD_NOINVOL, ("%s: comparing '%s' to '%s'\n", 7271 pmf, pathbuf, ip->ni_path)) 7272 if (strcmp(pathbuf, ip->ni_path) == 0) { 7273 found++; 7274 break; 7275 } 7276 } 7277 rw_exit(&pm_noinvol_rwlock); 7278 if (!found) { 7279 PM_UNLOCK_DIP(dip); 7280 kmem_free(pathbuf, MAXPATHLEN); 7281 return; 7282 } 7283 rw_enter(&pm_noinvol_rwlock, RW_WRITER); 7284 pp = NULL; 7285 for (ip = pm_noinvol_head; ip; pp = ip, ip = ip->ni_next) { 7286 PMD(PMD_NOINVOL, ("%s: comparing '%s' to '%s'\n", 7287 pmf, pathbuf, ip->ni_path)) 7288 if (strcmp(pathbuf, ip->ni_path) == 0) { 7289 ip->ni_flags &= ~PMC_DRIVER_REMOVED; 7290 DEVI(dip)->devi_pm_flags |= ip->ni_flags; 7291 /* 7292 * Handle special case of console fb 7293 */ 7294 if (PM_IS_CFB(dip)) { 7295 mutex_enter(&pm_cfb_lock); 7296 cfb_dip = dip; 7297 PMD(PMD_CFB, ("%s: %s@%s(%s#%d) setting " 7298 "cfb_dip\n", pmf, PM_DEVICE(dip))) 7299 mutex_exit(&pm_cfb_lock); 7300 } 7301 DEVI(dip)->devi_pm_noinvolpm = ip->ni_noinvolpm; 7302 ASSERT((DEVI(dip)->devi_pm_flags & 7303 (PMC_NO_INVOL | PMC_CONSOLE_FB)) || 7304 DEVI(dip)->devi_pm_noinvolpm); 7305 DEVI(dip)->devi_pm_volpmd = ip->ni_volpmd; 7306 PMD(PMD_NOINVOL, ("%s: noinvol=%d, volpmd=%d, " 7307 "wasvolpmd=%d, flags=%x, path=%s\n", pmf, 7308 ip->ni_noinvolpm, ip->ni_volpmd, 7309 ip->ni_wasvolpmd, ip->ni_flags, ip->ni_path)) 7310 /* 7311 * free the entry in hopes the list will now be empty 7312 * and we won't have to search it any more until the 7313 * device detaches 7314 */ 7315 if (pp) { 7316 PMD(PMD_NOINVOL, ("%s: free %s, prev %s\n", 7317 pmf, ip->ni_path, pp->ni_path)) 7318 pp->ni_next = ip->ni_next; 7319 } else { 7320 PMD(PMD_NOINVOL, ("%s: free %s head\n", 7321 pmf, ip->ni_path)) 7322 ASSERT(pm_noinvol_head == ip); 7323 pm_noinvol_head = ip->ni_next; 7324 } 7325 PM_UNLOCK_DIP(dip); 7326 wasvolpmd = ip->ni_wasvolpmd; 7327 rw_exit(&pm_noinvol_rwlock); 7328 kmem_free(ip->ni_path, ip->ni_size); 7329 kmem_free(ip, sizeof (*ip)); 7330 /* 7331 * Now walk up the tree decrementing devi_pm_noinvolpm 7332 * (and volpmd if appropriate) 7333 */ 7334 (void) pm_noinvol_update(PM_BP_NOINVOL_ATTACH, 0, 7335 wasvolpmd, pathbuf, dip); 7336 #ifdef DEBUG 7337 if (pm_debug & PMD_NOINVOL) 7338 pr_noinvol("noinvol_specd exit"); 7339 #endif 7340 kmem_free(pathbuf, MAXPATHLEN); 7341 return; 7342 } 7343 } 7344 kmem_free(pathbuf, MAXPATHLEN); 7345 rw_exit(&pm_noinvol_rwlock); 7346 PM_UNLOCK_DIP(dip); 7347 } 7348 7349 int 7350 pm_all_components_off(dev_info_t *dip) 7351 { 7352 int i; 7353 pm_component_t *cp; 7354 7355 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 7356 cp = PM_CP(dip, i); 7357 if (cp->pmc_cur_pwr == PM_LEVEL_UNKNOWN || 7358 cp->pmc_comp.pmc_lvals[cp->pmc_cur_pwr]) 7359 return (0); 7360 } 7361 return (1); /* all off */ 7362 } 7363 7364 /* 7365 * Make sure that all "no involuntary power cycles" devices are attached. 7366 * Called before doing a cpr suspend to make sure the driver has a say about 7367 * the power cycle 7368 */ 7369 int 7370 pm_reattach_noinvol(void) 7371 { 7372 PMD_FUNC(pmf, "reattach_noinvol") 7373 pm_noinvol_t *ip; 7374 char *path; 7375 dev_info_t *dip; 7376 7377 /* 7378 * Prevent the modunload thread from unloading any modules until we 7379 * have completely stopped all kernel threads. 7380 */ 7381 modunload_disable(); 7382 for (ip = pm_noinvol_head; ip; ip = ip->ni_next) { 7383 /* 7384 * Forget we'v ever seen any entry 7385 */ 7386 ip->ni_persistent = 0; 7387 } 7388 restart: 7389 rw_enter(&pm_noinvol_rwlock, RW_READER); 7390 for (ip = pm_noinvol_head; ip; ip = ip->ni_next) { 7391 major_t maj; 7392 maj = ip->ni_major; 7393 path = ip->ni_path; 7394 if (path != NULL && !(ip->ni_flags & PMC_DRIVER_REMOVED)) { 7395 if (ip->ni_persistent) { 7396 /* 7397 * If we weren't able to make this entry 7398 * go away, then we give up, as 7399 * holding/attaching the driver ought to have 7400 * resulted in this entry being deleted 7401 */ 7402 PMD(PMD_NOINVOL, ("%s: can't reattach %s " 7403 "(%s|%d)\n", pmf, ip->ni_path, 7404 ddi_major_to_name(maj), (int)maj)) 7405 cmn_err(CE_WARN, "cpr: unable to reattach %s ", 7406 ip->ni_path); 7407 modunload_enable(); 7408 rw_exit(&pm_noinvol_rwlock); 7409 return (0); 7410 } 7411 ip->ni_persistent++; 7412 rw_exit(&pm_noinvol_rwlock); 7413 PMD(PMD_NOINVOL, ("%s: holding %s\n", pmf, path)) 7414 dip = e_ddi_hold_devi_by_path(path, 0); 7415 if (dip == NULL) { 7416 PMD(PMD_NOINVOL, ("%s: can't hold (%s|%d)\n", 7417 pmf, path, (int)maj)) 7418 cmn_err(CE_WARN, "cpr: unable to hold %s " 7419 "driver", path); 7420 modunload_enable(); 7421 return (0); 7422 } else { 7423 PMD(PMD_DHR, ("%s: release %s\n", pmf, path)) 7424 /* 7425 * Since the modunload thread is stopped, we 7426 * don't have to keep the driver held, which 7427 * saves a ton of bookkeeping 7428 */ 7429 ddi_release_devi(dip); 7430 goto restart; 7431 } 7432 } else { 7433 PMD(PMD_NOINVOL, ("%s: skip %s; unknown major\n", 7434 pmf, ip->ni_path)) 7435 continue; 7436 } 7437 } 7438 rw_exit(&pm_noinvol_rwlock); 7439 return (1); 7440 } 7441 7442 void 7443 pm_reattach_noinvol_fini(void) 7444 { 7445 modunload_enable(); 7446 } 7447 7448 /* 7449 * Display pm support code 7450 */ 7451 7452 7453 /* 7454 * console frame-buffer power-mgmt gets enabled when debugging 7455 * services are not present or console fbpm override is set 7456 */ 7457 void 7458 pm_cfb_setup(const char *stdout_path) 7459 { 7460 PMD_FUNC(pmf, "cfb_setup") 7461 extern int obpdebug; 7462 char *devname; 7463 dev_info_t *dip; 7464 int devname_len; 7465 extern dev_info_t *fbdip; 7466 7467 /* 7468 * By virtue of this function being called (from consconfig), 7469 * we know stdout is a framebuffer. 7470 */ 7471 stdout_is_framebuffer = 1; 7472 7473 if (obpdebug || (boothowto & RB_DEBUG)) { 7474 if (pm_cfb_override == 0) { 7475 /* 7476 * Console is frame buffer, but we want to suppress 7477 * pm on it because of debugging setup 7478 */ 7479 pm_cfb_enabled = 0; 7480 cmn_err(CE_NOTE, "Kernel debugger present: disabling " 7481 "console power management."); 7482 /* 7483 * however, we still need to know which is the console 7484 * fb in order to suppress pm on it 7485 */ 7486 } else { 7487 cmn_err(CE_WARN, "Kernel debugger present: see " 7488 "kmdb(1M) for interaction with power management."); 7489 } 7490 } 7491 #ifdef DEBUG 7492 /* 7493 * IF console is fb and is power managed, don't do prom_printfs from 7494 * pm debug macro 7495 */ 7496 if (pm_cfb_enabled) { 7497 if (pm_debug) 7498 prom_printf("pm debug output will be to log only\n"); 7499 pm_divertdebug++; 7500 } 7501 #endif 7502 devname = i_ddi_strdup((char *)stdout_path, KM_SLEEP); 7503 devname_len = strlen(devname) + 1; 7504 PMD(PMD_CFB, ("%s: stripped %s\n", pmf, devname)) 7505 /* if the driver is attached */ 7506 if ((dip = fbdip) != NULL) { 7507 PMD(PMD_CFB, ("%s: attached: %s@%s(%s#%d)\n", pmf, 7508 PM_DEVICE(dip))) 7509 /* 7510 * We set up here as if the driver were power manageable in case 7511 * we get a later attach of a pm'able driver (which would result 7512 * in a panic later) 7513 */ 7514 cfb_dip = dip; 7515 DEVI(dip)->devi_pm_flags |= (PMC_CONSOLE_FB | PMC_NO_INVOL); 7516 PMD(PMD_CFB, ("%s: cfb_dip -> %s@%s(%s#%d)\n", pmf, 7517 PM_DEVICE(dip))) 7518 #ifdef DEBUG 7519 if (!(PM_GET_PM_INFO(dip) != NULL && PM_NUMCMPTS(dip))) { 7520 PMD(PMD_CFB, ("%s: %s@%s(%s#%d) not power-managed\n", 7521 pmf, PM_DEVICE(dip))) 7522 } 7523 #endif 7524 } else { 7525 char *ep; 7526 PMD(PMD_CFB, ("%s: pntd %s failed\n", pmf, devname)) 7527 pm_record_invol_path(devname, 7528 (PMC_CONSOLE_FB | PMC_NO_INVOL), 1, 0, 0, 7529 (major_t)-1); 7530 for (ep = strrchr(devname, '/'); ep != devname; 7531 ep = strrchr(devname, '/')) { 7532 PMD(PMD_CFB, ("%s: devname %s\n", pmf, devname)) 7533 *ep = '\0'; 7534 dip = pm_name_to_dip(devname, 0); 7535 if (dip != NULL) { 7536 /* 7537 * Walk up the tree incrementing 7538 * devi_pm_noinvolpm 7539 */ 7540 (void) pm_noinvol_update(PM_BP_NOINVOL_CFB, 7541 0, 0, devname, dip); 7542 break; 7543 } else { 7544 pm_record_invol_path(devname, 7545 PMC_NO_INVOL, 1, 0, 0, (major_t)-1); 7546 } 7547 } 7548 } 7549 kmem_free(devname, devname_len); 7550 } 7551 7552 void 7553 pm_cfb_rele(void) 7554 { 7555 mutex_enter(&pm_cfb_lock); 7556 /* 7557 * this call isn't using the console any more, it is ok to take it 7558 * down if the count goes to 0 7559 */ 7560 cfb_inuse--; 7561 mutex_exit(&pm_cfb_lock); 7562 } 7563 7564 /* 7565 * software interrupt handler for fbpm; this function exists because we can't 7566 * bring up the frame buffer power from above lock level. So if we need to, 7567 * we instead schedule a softint that runs this routine and takes us into 7568 * debug_enter (a bit delayed from the original request, but avoiding a panic). 7569 */ 7570 static uint_t 7571 pm_cfb_softint(caddr_t int_handler_arg) 7572 { 7573 _NOTE(ARGUNUSED(int_handler_arg)) 7574 int rval = DDI_INTR_UNCLAIMED; 7575 7576 mutex_enter(&pm_cfb_lock); 7577 if (pm_soft_pending) { 7578 mutex_exit(&pm_cfb_lock); 7579 debug_enter((char *)NULL); 7580 /* acquired in debug_enter before calling pm_cfb_trigger */ 7581 pm_cfb_rele(); 7582 mutex_enter(&pm_cfb_lock); 7583 pm_soft_pending = 0; 7584 mutex_exit(&pm_cfb_lock); 7585 rval = DDI_INTR_CLAIMED; 7586 } else 7587 mutex_exit(&pm_cfb_lock); 7588 7589 return (rval); 7590 } 7591 7592 void 7593 pm_cfb_setup_intr(void) 7594 { 7595 PMD_FUNC(pmf, "cfb_setup_intr") 7596 extern void prom_set_outfuncs(void (*)(void), void (*)(void)); 7597 void pm_cfb_check_and_powerup(void); 7598 7599 if (!stdout_is_framebuffer) { 7600 PMD(PMD_CFB, ("%s: console not fb\n", pmf)) 7601 return; 7602 } 7603 mutex_init(&pm_cfb_lock, NULL, MUTEX_SPIN, (void *)ipltospl(SPL8)); 7604 #ifdef DEBUG 7605 mutex_init(&pm_debug_lock, NULL, MUTEX_SPIN, (void *)ipltospl(SPL8)); 7606 #endif 7607 /* 7608 * setup software interrupt handler 7609 */ 7610 if (ddi_add_softintr(ddi_root_node(), DDI_SOFTINT_HIGH, &pm_soft_id, 7611 NULL, NULL, pm_cfb_softint, NULL) != DDI_SUCCESS) 7612 panic("pm: unable to register soft intr."); 7613 7614 prom_set_outfuncs(pm_cfb_check_and_powerup, pm_cfb_rele); 7615 } 7616 7617 /* 7618 * Checks to see if it is safe to write to the console wrt power management 7619 * (i.e. if the console is a framebuffer, then it must be at full power) 7620 * returns 1 when power is off (power-up is needed) 7621 * returns 0 when power is on (power-up not needed) 7622 */ 7623 int 7624 pm_cfb_check_and_hold(void) 7625 { 7626 /* 7627 * cfb_dip is set iff console is a power manageable frame buffer 7628 * device 7629 */ 7630 extern int modrootloaded; 7631 7632 mutex_enter(&pm_cfb_lock); 7633 cfb_inuse++; 7634 ASSERT(cfb_inuse); /* wrap? */ 7635 if (modrootloaded && cfb_dip) { 7636 /* 7637 * don't power down the frame buffer, the prom is using it 7638 */ 7639 if (pm_cfb_comps_off) { 7640 mutex_exit(&pm_cfb_lock); 7641 return (1); 7642 } 7643 } 7644 mutex_exit(&pm_cfb_lock); 7645 return (0); 7646 } 7647 7648 /* 7649 * turn on cfb power (which is known to be off). 7650 * Must be called below lock level! 7651 */ 7652 void 7653 pm_cfb_powerup(void) 7654 { 7655 pm_info_t *info; 7656 int norm; 7657 int ccount, ci; 7658 int unused; 7659 #ifdef DEBUG 7660 /* 7661 * Can't reenter prom_prekern, so suppress pm debug messages 7662 * (still go to circular buffer). 7663 */ 7664 mutex_enter(&pm_debug_lock); 7665 pm_divertdebug++; 7666 mutex_exit(&pm_debug_lock); 7667 #endif 7668 info = PM_GET_PM_INFO(cfb_dip); 7669 ASSERT(info); 7670 7671 ccount = PM_NUMCMPTS(cfb_dip); 7672 for (ci = 0; ci < ccount; ci++) { 7673 norm = pm_get_normal_power(cfb_dip, ci); 7674 (void) pm_set_power(cfb_dip, ci, norm, PM_LEVEL_UPONLY, 7675 PM_CANBLOCK_BYPASS, 0, &unused); 7676 } 7677 #ifdef DEBUG 7678 mutex_enter(&pm_debug_lock); 7679 pm_divertdebug--; 7680 mutex_exit(&pm_debug_lock); 7681 #endif 7682 } 7683 7684 /* 7685 * Check if the console framebuffer is powered up. If not power it up. 7686 * Note: Calling pm_cfb_check_and_hold has put a hold on the power state which 7687 * must be released by calling pm_cfb_rele when the console fb operation 7688 * is completed. 7689 */ 7690 void 7691 pm_cfb_check_and_powerup(void) 7692 { 7693 if (pm_cfb_check_and_hold()) 7694 pm_cfb_powerup(); 7695 } 7696 7697 /* 7698 * Trigger a low level interrupt to power up console frame buffer. 7699 */ 7700 void 7701 pm_cfb_trigger(void) 7702 { 7703 if (cfb_dip == NULL) 7704 return; 7705 7706 mutex_enter(&pm_cfb_lock); 7707 /* 7708 * If machine appears to be hung, pulling the keyboard connector of 7709 * the console will cause a high level interrupt and go to debug_enter. 7710 * But, if the fb is powered down, this routine will be called to bring 7711 * it up (by generating a softint to do the work). If soft interrupts 7712 * are not running, and the keyboard connector is pulled again, the 7713 * following code detects this condition and calls panic which allows 7714 * the fb to be brought up from high level. 7715 * 7716 * If two nearly simultaneous calls to debug_enter occur (both from 7717 * high level) the code described above will cause a panic. 7718 */ 7719 if (lbolt <= pm_soft_pending) { 7720 panicstr = "pm_cfb_trigger: lbolt not advancing"; 7721 panic(panicstr); /* does a power up at any intr level */ 7722 /* NOTREACHED */ 7723 } 7724 pm_soft_pending = lbolt; 7725 mutex_exit(&pm_cfb_lock); 7726 ddi_trigger_softintr(pm_soft_id); 7727 } 7728 7729 major_t 7730 pm_path_to_major(char *path) 7731 { 7732 PMD_FUNC(pmf, "path_to_major") 7733 char *np, *ap, *bp; 7734 major_t ret; 7735 size_t len; 7736 static major_t i_path_to_major(char *, char *); 7737 7738 PMD(PMD_NOINVOL, ("%s: %s\n", pmf, path)) 7739 7740 np = strrchr(path, '/'); 7741 if (np != NULL) 7742 np++; 7743 else 7744 np = path; 7745 len = strlen(np) + 1; 7746 bp = kmem_alloc(len, KM_SLEEP); 7747 (void) strcpy(bp, np); 7748 if ((ap = strchr(bp, '@')) != NULL) { 7749 *ap = '\0'; 7750 } 7751 PMD(PMD_NOINVOL, ("%s: %d\n", pmf, ddi_name_to_major(np))) 7752 ret = i_path_to_major(path, np); 7753 kmem_free(bp, len); 7754 return (ret); 7755 } 7756 7757 #ifdef DEBUG 7758 7759 char *pm_msgp; 7760 char *pm_bufend; 7761 char *pm_msgbuf = NULL; 7762 int pm_logpages = 2; 7763 7764 #define PMLOGPGS pm_logpages 7765 7766 /*PRINTFLIKE1*/ 7767 void 7768 pm_log(const char *fmt, ...) 7769 { 7770 va_list adx; 7771 size_t size; 7772 7773 mutex_enter(&pm_debug_lock); 7774 if (pm_msgbuf == NULL) { 7775 pm_msgbuf = kmem_zalloc(mmu_ptob(PMLOGPGS), KM_SLEEP); 7776 pm_bufend = pm_msgbuf + mmu_ptob(PMLOGPGS) - 1; 7777 pm_msgp = pm_msgbuf; 7778 } 7779 va_start(adx, fmt); 7780 size = vsnprintf(NULL, 0, fmt, adx) + 1; 7781 va_end(adx); 7782 va_start(adx, fmt); 7783 if (size > (pm_bufend - pm_msgp)) { /* wraps */ 7784 bzero(pm_msgp, pm_bufend - pm_msgp); 7785 (void) vsnprintf(pm_msgbuf, size, fmt, adx); 7786 if (!pm_divertdebug) 7787 prom_printf("%s", pm_msgp); 7788 pm_msgp = pm_msgbuf + size; 7789 } else { 7790 (void) vsnprintf(pm_msgp, size, fmt, adx); 7791 if (!pm_divertdebug) 7792 prom_printf("%s", pm_msgp); 7793 pm_msgp += size; 7794 } 7795 va_end(adx); 7796 mutex_exit(&pm_debug_lock); 7797 } 7798 #endif /* DEBUG */ 7799 7800 /* 7801 * We want to save the state of any directly pm'd devices over the suspend/ 7802 * resume process so that we can put them back the way the controlling 7803 * process left them. 7804 */ 7805 void 7806 pm_save_direct_levels(void) 7807 { 7808 pm_processes_stopped = 1; 7809 ddi_walk_devs(ddi_root_node(), pm_save_direct_lvl_walk, 0); 7810 } 7811 7812 static int 7813 pm_save_direct_lvl_walk(dev_info_t *dip, void *arg) 7814 { 7815 _NOTE(ARGUNUSED(arg)) 7816 int i; 7817 int *ip; 7818 pm_info_t *info = PM_GET_PM_INFO(dip); 7819 7820 if (!info) 7821 return (DDI_WALK_CONTINUE); 7822 7823 if (PM_ISDIRECT(dip) && !PM_ISBC(dip)) { 7824 if (PM_NUMCMPTS(dip) > 2) { 7825 info->pmi_lp = kmem_alloc(PM_NUMCMPTS(dip) * 7826 sizeof (int), KM_SLEEP); 7827 ip = info->pmi_lp; 7828 } else { 7829 ip = info->pmi_levels; 7830 } 7831 /* autopm and processes are stopped, ok not to lock power */ 7832 for (i = 0; i < PM_NUMCMPTS(dip); i++) 7833 *ip++ = PM_CURPOWER(dip, i); 7834 /* 7835 * There is a small window between stopping the 7836 * processes and setting pm_processes_stopped where 7837 * a driver could get hung up in a pm_raise_power() 7838 * call. Free any such driver now. 7839 */ 7840 pm_proceed(dip, PMP_RELEASE, -1, -1); 7841 } 7842 7843 return (DDI_WALK_CONTINUE); 7844 } 7845 7846 void 7847 pm_restore_direct_levels(void) 7848 { 7849 /* 7850 * If cpr didn't call pm_save_direct_levels, (because stopping user 7851 * threads failed) then we don't want to try to restore them 7852 */ 7853 if (!pm_processes_stopped) 7854 return; 7855 7856 ddi_walk_devs(ddi_root_node(), pm_restore_direct_lvl_walk, 0); 7857 pm_processes_stopped = 0; 7858 } 7859 7860 static int 7861 pm_restore_direct_lvl_walk(dev_info_t *dip, void *arg) 7862 { 7863 _NOTE(ARGUNUSED(arg)) 7864 PMD_FUNC(pmf, "restore_direct_lvl_walk") 7865 int i, nc, result; 7866 int *ip; 7867 7868 pm_info_t *info = PM_GET_PM_INFO(dip); 7869 if (!info) 7870 return (DDI_WALK_CONTINUE); 7871 7872 if (PM_ISDIRECT(dip) && !PM_ISBC(dip)) { 7873 if ((nc = PM_NUMCMPTS(dip)) > 2) { 7874 ip = &info->pmi_lp[nc - 1]; 7875 } else { 7876 ip = &info->pmi_levels[nc - 1]; 7877 } 7878 /* 7879 * Because fb drivers fail attempts to turn off the 7880 * fb when the monitor is on, but treat a request to 7881 * turn on the monitor as a request to turn on the 7882 * fb too, we process components in descending order 7883 * Because autopm is disabled and processes aren't 7884 * running, it is ok to examine current power outside 7885 * of the power lock 7886 */ 7887 for (i = nc - 1; i >= 0; i--, ip--) { 7888 if (PM_CURPOWER(dip, i) == *ip) 7889 continue; 7890 if (pm_set_power(dip, i, *ip, PM_LEVEL_EXACT, 7891 PM_CANBLOCK_BYPASS, 0, &result) != 7892 DDI_SUCCESS) { 7893 cmn_err(CE_WARN, "cpr: unable " 7894 "to restore power level of " 7895 "component %d of directly " 7896 "power manged device %s@%s" 7897 " to %d", 7898 i, PM_NAME(dip), 7899 PM_ADDR(dip), *ip); 7900 PMD(PMD_FAIL, ("%s: failed to restore " 7901 "%s@%s(%s#%d)[%d] exact(%d)->%d, " 7902 "errno %d\n", pmf, PM_DEVICE(dip), i, 7903 PM_CURPOWER(dip, i), *ip, result)) 7904 } 7905 } 7906 if (nc > 2) { 7907 kmem_free(info->pmi_lp, nc * sizeof (int)); 7908 info->pmi_lp = NULL; 7909 } 7910 } 7911 return (DDI_WALK_CONTINUE); 7912 } 7913 7914 /* 7915 * Stolen from the bootdev module 7916 * attempt to convert a path to a major number 7917 */ 7918 static major_t 7919 i_path_to_major(char *path, char *leaf_name) 7920 { 7921 extern major_t path_to_major(char *pathname); 7922 major_t maj; 7923 7924 if ((maj = path_to_major(path)) == (major_t)-1) { 7925 maj = ddi_name_to_major(leaf_name); 7926 } 7927 7928 return (maj); 7929 } 7930 7931 /* 7932 * When user calls rem_drv, we need to forget no-involuntary-power-cycles state 7933 * An entry in the list means that the device is detached, so we need to 7934 * adjust its ancestors as if they had just seen this attach, and any detached 7935 * ancestors need to have their list entries adjusted. 7936 */ 7937 void 7938 pm_driver_removed(major_t major) 7939 { 7940 static void i_pm_driver_removed(major_t major); 7941 7942 /* 7943 * Serialize removal of drivers. This is to keep ancestors of 7944 * a node that is being deleted from getting deleted and added back 7945 * with different counters. 7946 */ 7947 mutex_enter(&pm_remdrv_lock); 7948 i_pm_driver_removed(major); 7949 mutex_exit(&pm_remdrv_lock); 7950 } 7951 7952 /* 7953 * This routine is called recursively by pm_noinvol_process_ancestors() 7954 */ 7955 static void 7956 i_pm_driver_removed(major_t major) 7957 { 7958 PMD_FUNC(pmf, "driver_removed") 7959 static void adjust_ancestors(char *, int); 7960 static int pm_is_noinvol_ancestor(pm_noinvol_t *); 7961 static void pm_noinvol_process_ancestors(char *); 7962 pm_noinvol_t *ip, *pp = NULL; 7963 int wasvolpmd; 7964 ASSERT(major != (major_t)-1); 7965 PMD(PMD_NOINVOL, ("%s: %s\n", pmf, ddi_major_to_name(major))) 7966 again: 7967 rw_enter(&pm_noinvol_rwlock, RW_WRITER); 7968 for (ip = pm_noinvol_head; ip; pp = ip, ip = ip->ni_next) { 7969 if (major != ip->ni_major) 7970 continue; 7971 /* 7972 * If it is an ancestor of no-invol node, which is 7973 * not removed, skip it. This is to cover the case of 7974 * ancestor removed without removing its descendants. 7975 */ 7976 if (pm_is_noinvol_ancestor(ip)) { 7977 ip->ni_flags |= PMC_DRIVER_REMOVED; 7978 continue; 7979 } 7980 wasvolpmd = ip->ni_wasvolpmd; 7981 /* 7982 * remove the entry from the list 7983 */ 7984 if (pp) { 7985 PMD(PMD_NOINVOL, ("%s: freeing %s, prev is %s\n", 7986 pmf, ip->ni_path, pp->ni_path)) 7987 pp->ni_next = ip->ni_next; 7988 } else { 7989 PMD(PMD_NOINVOL, ("%s: free %s head\n", pmf, 7990 ip->ni_path)) 7991 ASSERT(pm_noinvol_head == ip); 7992 pm_noinvol_head = ip->ni_next; 7993 } 7994 rw_exit(&pm_noinvol_rwlock); 7995 adjust_ancestors(ip->ni_path, wasvolpmd); 7996 /* 7997 * Had an ancestor been removed before this node, it would have 7998 * been skipped. Adjust the no-invol counters for such skipped 7999 * ancestors. 8000 */ 8001 pm_noinvol_process_ancestors(ip->ni_path); 8002 kmem_free(ip->ni_path, ip->ni_size); 8003 kmem_free(ip, sizeof (*ip)); 8004 goto again; 8005 } 8006 rw_exit(&pm_noinvol_rwlock); 8007 } 8008 8009 /* 8010 * returns 1, if *aip is a ancestor of a no-invol node 8011 * 0, otherwise 8012 */ 8013 static int 8014 pm_is_noinvol_ancestor(pm_noinvol_t *aip) 8015 { 8016 pm_noinvol_t *ip; 8017 8018 ASSERT(strlen(aip->ni_path) != 0); 8019 for (ip = pm_noinvol_head; ip; ip = ip->ni_next) { 8020 if (ip == aip) 8021 continue; 8022 /* 8023 * To be an ancestor, the path must be an initial substring of 8024 * the descendent, and end just before a '/' in the 8025 * descendent's path. 8026 */ 8027 if ((strstr(ip->ni_path, aip->ni_path) == ip->ni_path) && 8028 (ip->ni_path[strlen(aip->ni_path)] == '/')) 8029 return (1); 8030 } 8031 return (0); 8032 } 8033 8034 #define PM_MAJOR(dip) ddi_name_to_major(ddi_binding_name(dip)) 8035 /* 8036 * scan through the pm_noinvolpm list adjusting ancestors of the current 8037 * node; Modifies string *path. 8038 */ 8039 static void 8040 adjust_ancestors(char *path, int wasvolpmd) 8041 { 8042 PMD_FUNC(pmf, "adjust_ancestors") 8043 char *cp; 8044 pm_noinvol_t *lp; 8045 pm_noinvol_t *pp = NULL; 8046 major_t locked = (major_t)UINT_MAX; 8047 dev_info_t *dip; 8048 char *pathbuf; 8049 size_t pathbuflen = strlen(path) + 1; 8050 8051 /* 8052 * First we look up the ancestor's dip. If we find it, then we 8053 * adjust counts up the tree 8054 */ 8055 PMD(PMD_NOINVOL, ("%s: %s wasvolpmd %d\n", pmf, path, wasvolpmd)) 8056 pathbuf = kmem_alloc(pathbuflen, KM_SLEEP); 8057 (void) strcpy(pathbuf, path); 8058 cp = strrchr(pathbuf, '/'); 8059 if (cp == NULL) { 8060 /* if no ancestors, then nothing to do */ 8061 kmem_free(pathbuf, pathbuflen); 8062 return; 8063 } 8064 *cp = '\0'; 8065 dip = pm_name_to_dip(pathbuf, 1); 8066 if (dip != NULL) { 8067 locked = PM_MAJOR(dip); 8068 8069 (void) pm_noinvol_update(PM_BP_NOINVOL_REMDRV, 0, wasvolpmd, 8070 path, dip); 8071 8072 if (locked != (major_t)UINT_MAX) 8073 ddi_release_devi(dip); 8074 } else { 8075 char *apath; 8076 size_t len = strlen(pathbuf) + 1; 8077 int lock_held = 1; 8078 8079 /* 8080 * Now check for ancestors that exist only in the list 8081 */ 8082 apath = kmem_alloc(len, KM_SLEEP); 8083 (void) strcpy(apath, pathbuf); 8084 rw_enter(&pm_noinvol_rwlock, RW_WRITER); 8085 for (lp = pm_noinvol_head; lp; pp = lp, lp = lp->ni_next) { 8086 /* 8087 * This can only happen once. Since we have to drop 8088 * the lock, we need to extract the relevant info. 8089 */ 8090 if (strcmp(pathbuf, lp->ni_path) == 0) { 8091 PMD(PMD_NOINVOL, ("%s: %s no %d -> %d\n", pmf, 8092 lp->ni_path, lp->ni_noinvolpm, 8093 lp->ni_noinvolpm - 1)) 8094 lp->ni_noinvolpm--; 8095 if (wasvolpmd && lp->ni_volpmd) { 8096 PMD(PMD_NOINVOL, ("%s: %s vol %d -> " 8097 "%d\n", pmf, lp->ni_path, 8098 lp->ni_volpmd, lp->ni_volpmd - 1)) 8099 lp->ni_volpmd--; 8100 } 8101 /* 8102 * remove the entry from the list, if there 8103 * are no more no-invol descendants and node 8104 * itself is not a no-invol node. 8105 */ 8106 if (!(lp->ni_noinvolpm || 8107 (lp->ni_flags & PMC_NO_INVOL))) { 8108 ASSERT(lp->ni_volpmd == 0); 8109 if (pp) { 8110 PMD(PMD_NOINVOL, ("%s: freeing " 8111 "%s, prev is %s\n", pmf, 8112 lp->ni_path, pp->ni_path)) 8113 pp->ni_next = lp->ni_next; 8114 } else { 8115 PMD(PMD_NOINVOL, ("%s: free %s " 8116 "head\n", pmf, lp->ni_path)) 8117 ASSERT(pm_noinvol_head == lp); 8118 pm_noinvol_head = lp->ni_next; 8119 } 8120 lock_held = 0; 8121 rw_exit(&pm_noinvol_rwlock); 8122 adjust_ancestors(apath, wasvolpmd); 8123 /* restore apath */ 8124 (void) strcpy(apath, pathbuf); 8125 kmem_free(lp->ni_path, lp->ni_size); 8126 kmem_free(lp, sizeof (*lp)); 8127 } 8128 break; 8129 } 8130 } 8131 if (lock_held) 8132 rw_exit(&pm_noinvol_rwlock); 8133 adjust_ancestors(apath, wasvolpmd); 8134 kmem_free(apath, len); 8135 } 8136 kmem_free(pathbuf, pathbuflen); 8137 } 8138 8139 /* 8140 * Do no-invol processing for any ancestors i.e. adjust counters of ancestors, 8141 * which were skipped even though their drivers were removed. 8142 */ 8143 static void 8144 pm_noinvol_process_ancestors(char *path) 8145 { 8146 pm_noinvol_t *lp; 8147 8148 rw_enter(&pm_noinvol_rwlock, RW_READER); 8149 for (lp = pm_noinvol_head; lp; lp = lp->ni_next) { 8150 if (strstr(path, lp->ni_path) && 8151 (lp->ni_flags & PMC_DRIVER_REMOVED)) { 8152 rw_exit(&pm_noinvol_rwlock); 8153 i_pm_driver_removed(lp->ni_major); 8154 return; 8155 } 8156 } 8157 rw_exit(&pm_noinvol_rwlock); 8158 } 8159 8160 /* 8161 * Returns true if (detached) device needs to be kept up because it exported the 8162 * "no-involuntary-power-cycles" property or we're pretending it did (console 8163 * fb case) or it is an ancestor of such a device and has used up the "one 8164 * free cycle" allowed when all such leaf nodes have voluntarily powered down 8165 * upon detach. In any event, we need an exact hit on the path or we return 8166 * false. 8167 */ 8168 int 8169 pm_noinvol_detached(char *path) 8170 { 8171 PMD_FUNC(pmf, "noinvol_detached") 8172 pm_noinvol_t *ip; 8173 int ret = 0; 8174 8175 rw_enter(&pm_noinvol_rwlock, RW_READER); 8176 for (ip = pm_noinvol_head; ip; ip = ip->ni_next) { 8177 if (strcmp(path, ip->ni_path) == 0) { 8178 if (ip->ni_flags & PMC_CONSOLE_FB) { 8179 PMD(PMD_NOINVOL | PMD_CFB, ("%s: inhibits CFB " 8180 "%s\n", pmf, path)) 8181 ret = 1; 8182 break; 8183 } 8184 #ifdef DEBUG 8185 if (ip->ni_noinvolpm != ip->ni_volpmd) 8186 PMD(PMD_NOINVOL, ("%s: (%d != %d) inhibits %s" 8187 "\n", pmf, ip->ni_noinvolpm, ip->ni_volpmd, 8188 path)) 8189 #endif 8190 ret = (ip->ni_noinvolpm != ip->ni_volpmd); 8191 break; 8192 } 8193 } 8194 rw_exit(&pm_noinvol_rwlock); 8195 return (ret); 8196 } 8197 8198 int 8199 pm_is_cfb(dev_info_t *dip) 8200 { 8201 return (dip == cfb_dip); 8202 } 8203 8204 #ifdef DEBUG 8205 /* 8206 * Return true if all components of the console frame buffer are at 8207 * "normal" power, i.e., fully on. For the case where the console is not 8208 * a framebuffer, we also return true 8209 */ 8210 int 8211 pm_cfb_is_up(void) 8212 { 8213 return (pm_cfb_comps_off == 0); 8214 } 8215 #endif 8216 8217 /* 8218 * Preventing scan from powering down the node by incrementing the 8219 * kidsupcnt. 8220 */ 8221 void 8222 pm_hold_power(dev_info_t *dip) 8223 { 8224 e_pm_hold_rele_power(dip, 1); 8225 } 8226 8227 /* 8228 * Releasing the hold by decrementing the kidsupcnt allowing scan 8229 * to power down the node if all conditions are met. 8230 */ 8231 void 8232 pm_rele_power(dev_info_t *dip) 8233 { 8234 e_pm_hold_rele_power(dip, -1); 8235 } 8236 8237 /* 8238 * A wrapper of pm_all_to_normal() to power up a dip 8239 * to its normal level 8240 */ 8241 int 8242 pm_powerup(dev_info_t *dip) 8243 { 8244 PMD_FUNC(pmf, "pm_powerup") 8245 8246 PMD(PMD_ALLNORM, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 8247 ASSERT(!(servicing_interrupt())); 8248 8249 /* 8250 * in case this node is not already participating pm 8251 */ 8252 if (!PM_GET_PM_INFO(dip)) { 8253 if (!DEVI_IS_ATTACHING(dip)) 8254 return (DDI_SUCCESS); 8255 if (pm_start(dip) != DDI_SUCCESS) 8256 return (DDI_FAILURE); 8257 if (!PM_GET_PM_INFO(dip)) 8258 return (DDI_SUCCESS); 8259 } 8260 8261 return (pm_all_to_normal(dip, PM_CANBLOCK_BLOCK)); 8262 } 8263 8264 int 8265 pm_rescan_walk(dev_info_t *dip, void *arg) 8266 { 8267 _NOTE(ARGUNUSED(arg)) 8268 8269 if (!PM_GET_PM_INFO(dip) || PM_ISBC(dip)) 8270 return (DDI_WALK_CONTINUE); 8271 8272 /* 8273 * Currently pm_cpr_callb/resume code is the only caller 8274 * and it needs to make sure that stopped scan get 8275 * reactivated. Otherwise, rescan walk needn't reactive 8276 * stopped scan. 8277 */ 8278 pm_scan_init(dip); 8279 8280 (void) pm_rescan(dip); 8281 return (DDI_WALK_CONTINUE); 8282 } 8283 8284 static dev_info_t * 8285 pm_get_next_descendent(dev_info_t *dip, dev_info_t *tdip) 8286 { 8287 dev_info_t *wdip, *pdip; 8288 8289 for (wdip = tdip; wdip != dip; wdip = pdip) { 8290 pdip = ddi_get_parent(wdip); 8291 if (pdip == dip) 8292 return (wdip); 8293 } 8294 return (NULL); 8295 } 8296 8297 int 8298 pm_busop_bus_power(dev_info_t *dip, void *impl_arg, pm_bus_power_op_t op, 8299 void *arg, void *result) 8300 { 8301 PMD_FUNC(pmf, "bp_bus_power") 8302 dev_info_t *cdip; 8303 pm_info_t *cinfo; 8304 pm_bp_child_pwrchg_t *bpc; 8305 pm_sp_misc_t *pspm; 8306 pm_bp_nexus_pwrup_t *bpn; 8307 pm_bp_child_pwrchg_t new_bpc; 8308 pm_bp_noinvol_t *bpi; 8309 dev_info_t *tdip; 8310 char *pathbuf; 8311 int ret = DDI_SUCCESS; 8312 int errno = 0; 8313 pm_component_t *cp; 8314 8315 PMD(PMD_SET, ("%s: %s@%s(%s#%d) %s\n", pmf, PM_DEVICE(dip), 8316 pm_decode_op(op))) 8317 switch (op) { 8318 case BUS_POWER_CHILD_PWRCHG: 8319 bpc = (pm_bp_child_pwrchg_t *)arg; 8320 pspm = (pm_sp_misc_t *)bpc->bpc_private; 8321 tdip = bpc->bpc_dip; 8322 cdip = pm_get_next_descendent(dip, tdip); 8323 cinfo = PM_GET_PM_INFO(cdip); 8324 if (cdip != tdip) { 8325 /* 8326 * If the node is an involved parent, it needs to 8327 * power up the node as it is needed. There is nothing 8328 * else the framework can do here. 8329 */ 8330 if (PM_WANTS_NOTIFICATION(cdip)) { 8331 PMD(PMD_SET, ("%s: call bus_power for " 8332 "%s@%s(%s#%d)\n", pmf, PM_DEVICE(cdip))) 8333 return ((*PM_BUS_POWER_FUNC(cdip))(cdip, 8334 impl_arg, op, arg, result)); 8335 } 8336 ASSERT(pspm->pspm_direction == PM_LEVEL_UPONLY || 8337 pspm->pspm_direction == PM_LEVEL_DOWNONLY || 8338 pspm->pspm_direction == PM_LEVEL_EXACT); 8339 /* 8340 * we presume that the parent needs to be up in 8341 * order for the child to change state (either 8342 * because it must already be on if the child is on 8343 * (and the pm_all_to_normal_nexus() will be a nop) 8344 * or because it will need to be on for the child 8345 * to come on; so we make the call regardless 8346 */ 8347 pm_hold_power(cdip); 8348 if (cinfo) { 8349 pm_canblock_t canblock = pspm->pspm_canblock; 8350 ret = pm_all_to_normal_nexus(cdip, canblock); 8351 if (ret != DDI_SUCCESS) { 8352 pm_rele_power(cdip); 8353 return (ret); 8354 } 8355 } 8356 PMD(PMD_SET, ("%s: walk down to %s@%s(%s#%d)\n", pmf, 8357 PM_DEVICE(cdip))) 8358 ret = pm_busop_bus_power(cdip, impl_arg, op, arg, 8359 result); 8360 pm_rele_power(cdip); 8361 } else { 8362 ret = pm_busop_set_power(cdip, impl_arg, op, arg, 8363 result); 8364 } 8365 return (ret); 8366 8367 case BUS_POWER_NEXUS_PWRUP: 8368 bpn = (pm_bp_nexus_pwrup_t *)arg; 8369 pspm = (pm_sp_misc_t *)bpn->bpn_private; 8370 8371 if (!e_pm_valid_info(dip, NULL) || 8372 !e_pm_valid_comp(dip, bpn->bpn_comp, &cp) || 8373 !e_pm_valid_power(dip, bpn->bpn_comp, bpn->bpn_level)) { 8374 PMD(PMD_SET, ("%s: %s@%s(%s#%d) has no pm info; EIO\n", 8375 pmf, PM_DEVICE(dip))) 8376 *pspm->pspm_errnop = EIO; 8377 *(int *)result = DDI_FAILURE; 8378 return (DDI_FAILURE); 8379 } 8380 8381 ASSERT(bpn->bpn_dip == dip); 8382 PMD(PMD_SET, ("%s: nexus powerup for %s@%s(%s#%d)\n", pmf, 8383 PM_DEVICE(dip))) 8384 new_bpc.bpc_dip = dip; 8385 pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 8386 new_bpc.bpc_path = ddi_pathname(dip, pathbuf); 8387 new_bpc.bpc_comp = bpn->bpn_comp; 8388 new_bpc.bpc_olevel = PM_CURPOWER(dip, bpn->bpn_comp); 8389 new_bpc.bpc_nlevel = bpn->bpn_level; 8390 new_bpc.bpc_private = bpn->bpn_private; 8391 ((pm_sp_misc_t *)(new_bpc.bpc_private))->pspm_direction = 8392 PM_LEVEL_UPONLY; 8393 ((pm_sp_misc_t *)(new_bpc.bpc_private))->pspm_errnop = 8394 &errno; 8395 ret = pm_busop_set_power(dip, impl_arg, BUS_POWER_CHILD_PWRCHG, 8396 (void *)&new_bpc, result); 8397 kmem_free(pathbuf, MAXPATHLEN); 8398 return (ret); 8399 8400 case BUS_POWER_NOINVOL: 8401 bpi = (pm_bp_noinvol_t *)arg; 8402 tdip = bpi->bpni_dip; 8403 cdip = pm_get_next_descendent(dip, tdip); 8404 8405 /* In case of rem_drv, the leaf node has been removed */ 8406 if (cdip == NULL) 8407 return (DDI_SUCCESS); 8408 8409 cinfo = PM_GET_PM_INFO(cdip); 8410 if (cdip != tdip) { 8411 if (PM_WANTS_NOTIFICATION(cdip)) { 8412 PMD(PMD_NOINVOL, 8413 ("%s: call bus_power for %s@%s(%s#%d)\n", 8414 pmf, PM_DEVICE(cdip))) 8415 ret = (*PM_BUS_POWER_FUNC(cdip)) 8416 (cdip, NULL, op, arg, result); 8417 if ((cinfo) && (ret == DDI_SUCCESS)) 8418 (void) pm_noinvol_update_node(cdip, 8419 bpi); 8420 return (ret); 8421 } else { 8422 PMD(PMD_NOINVOL, 8423 ("%s: walk down to %s@%s(%s#%d)\n", pmf, 8424 PM_DEVICE(cdip))) 8425 ret = pm_busop_bus_power(cdip, NULL, op, 8426 arg, result); 8427 /* 8428 * Update the current node. 8429 */ 8430 if ((cinfo) && (ret == DDI_SUCCESS)) 8431 (void) pm_noinvol_update_node(cdip, 8432 bpi); 8433 return (ret); 8434 } 8435 } else { 8436 /* 8437 * For attach, detach, power up: 8438 * Do nothing for leaf node since its 8439 * counts are already updated. 8440 * For CFB and driver removal, since the 8441 * path and the target dip passed in is up to and incl. 8442 * the immediate ancestor, need to do the update. 8443 */ 8444 PMD(PMD_NOINVOL, ("%s: target %s@%s(%s#%d) is " 8445 "reached\n", pmf, PM_DEVICE(cdip))) 8446 if (cinfo && ((bpi->bpni_cmd == PM_BP_NOINVOL_REMDRV) || 8447 (bpi->bpni_cmd == PM_BP_NOINVOL_CFB))) 8448 (void) pm_noinvol_update_node(cdip, bpi); 8449 return (DDI_SUCCESS); 8450 } 8451 8452 default: 8453 PMD(PMD_SET, ("%s: operation %d is not supported!\n", pmf, op)) 8454 return (DDI_FAILURE); 8455 } 8456 } 8457 8458 static int 8459 pm_busop_set_power(dev_info_t *dip, void *impl_arg, pm_bus_power_op_t op, 8460 void *arg, void *resultp) 8461 { 8462 _NOTE(ARGUNUSED(impl_arg)) 8463 PMD_FUNC(pmf, "bp_set_power") 8464 pm_ppm_devlist_t *devl; 8465 int clevel, circ; 8466 #ifdef DEBUG 8467 int circ_db, ccirc_db; 8468 #endif 8469 int ret = DDI_SUCCESS; 8470 dev_info_t *cdip; 8471 pm_bp_child_pwrchg_t *bpc = (pm_bp_child_pwrchg_t *)arg; 8472 pm_sp_misc_t *pspm = (pm_sp_misc_t *)bpc->bpc_private; 8473 pm_canblock_t canblock = pspm->pspm_canblock; 8474 int scan = pspm->pspm_scan; 8475 int comp = bpc->bpc_comp; 8476 int olevel = bpc->bpc_olevel; 8477 int nlevel = bpc->bpc_nlevel; 8478 int comps_off_incr = 0; 8479 dev_info_t *pdip = ddi_get_parent(dip); 8480 int dodeps; 8481 int direction = pspm->pspm_direction; 8482 int *errnop = pspm->pspm_errnop; 8483 char *dir = pm_decode_direction(direction); 8484 int *iresp = (int *)resultp; 8485 time_t idletime, thresh; 8486 pm_component_t *cp = PM_CP(dip, comp); 8487 int work_type; 8488 8489 *iresp = DDI_SUCCESS; 8490 *errnop = 0; 8491 ASSERT(op == BUS_POWER_CHILD_PWRCHG); 8492 PMD(PMD_SET, ("%s: %s@%s(%s#%d) %s\n", pmf, PM_DEVICE(dip), 8493 pm_decode_op(op))) 8494 8495 /* 8496 * The following set of conditions indicate we are here to handle a 8497 * driver's pm_[raise|lower]_power request, but the device is being 8498 * power managed (PM_DIRECT_PM) by a user process. For that case 8499 * we want to pm_block and pass a status back to the caller based 8500 * on whether the controlling process's next activity on the device 8501 * matches the current request or not. This distinction tells 8502 * downstream functions to avoid calling into a driver or changing 8503 * the framework's power state. To actually block, we need: 8504 * 8505 * PM_ISDIRECT(dip) 8506 * no reason to block unless a process is directly controlling dev 8507 * direction != PM_LEVEL_EXACT 8508 * EXACT is used by controlling proc's PM_SET_CURRENT_POWER ioctl 8509 * !pm_processes_stopped 8510 * don't block if controlling proc already be stopped for cpr 8511 * canblock != PM_CANBLOCK_BYPASS 8512 * our caller must not have explicitly prevented blocking 8513 */ 8514 if (direction != PM_LEVEL_EXACT && canblock != PM_CANBLOCK_BYPASS) { 8515 PM_LOCK_DIP(dip); 8516 while (PM_ISDIRECT(dip) && !pm_processes_stopped) { 8517 /* releases dip lock */ 8518 ret = pm_busop_match_request(dip, bpc); 8519 if (ret == EAGAIN) { 8520 PM_LOCK_DIP(dip); 8521 continue; 8522 } 8523 return (*iresp = ret); 8524 } 8525 PM_UNLOCK_DIP(dip); 8526 } 8527 /* BC device is never scanned, so power will stick until we are done */ 8528 if (PM_ISBC(dip) && comp != 0 && nlevel != 0 && 8529 direction != PM_LEVEL_DOWNONLY) { 8530 int nrmpwr0 = pm_get_normal_power(dip, 0); 8531 if (pm_set_power(dip, 0, nrmpwr0, direction, 8532 canblock, 0, resultp) != DDI_SUCCESS) { 8533 /* *resultp set by pm_set_power */ 8534 return (DDI_FAILURE); 8535 } 8536 } 8537 if (PM_WANTS_NOTIFICATION(pdip)) { 8538 PMD(PMD_SET, ("%s: pre_notify %s@%s(%s#%d) for child " 8539 "%s@%s(%s#%d)\n", pmf, PM_DEVICE(pdip), PM_DEVICE(dip))) 8540 ret = (*PM_BUS_POWER_FUNC(pdip))(pdip, NULL, 8541 BUS_POWER_PRE_NOTIFICATION, bpc, resultp); 8542 if (ret != DDI_SUCCESS) { 8543 PMD(PMD_SET, ("%s: failed to pre_notify %s@%s(%s#%d)\n", 8544 pmf, PM_DEVICE(pdip))) 8545 return (DDI_FAILURE); 8546 } 8547 } else { 8548 /* 8549 * Since we don't know what the actual power level is, 8550 * we place a power hold on the parent no matter what 8551 * component and level is changing. 8552 */ 8553 pm_hold_power(pdip); 8554 } 8555 PM_LOCK_POWER(dip, &circ); 8556 clevel = PM_CURPOWER(dip, comp); 8557 PMD(PMD_SET, ("%s: %s@%s(%s#%d), cmp=%d, olvl=%d, nlvl=%d, clvl=%d, " 8558 "dir=%s\n", pmf, PM_DEVICE(dip), comp, bpc->bpc_olevel, nlevel, 8559 clevel, dir)) 8560 switch (direction) { 8561 case PM_LEVEL_UPONLY: 8562 /* Powering up */ 8563 if (clevel >= nlevel) { 8564 PMD(PMD_SET, ("%s: current level is already " 8565 "at or above the requested level.\n", pmf)) 8566 *iresp = DDI_SUCCESS; 8567 ret = DDI_SUCCESS; 8568 goto post_notify; 8569 } 8570 break; 8571 case PM_LEVEL_EXACT: 8572 /* specific level request */ 8573 if (clevel == nlevel && !PM_ISBC(dip)) { 8574 PMD(PMD_SET, ("%s: current level is already " 8575 "at the requested level.\n", pmf)) 8576 *iresp = DDI_SUCCESS; 8577 ret = DDI_SUCCESS; 8578 goto post_notify; 8579 } else if (PM_IS_CFB(dip) && (nlevel < clevel)) { 8580 PMD(PMD_CFB, ("%s: powerdown of console\n", pmf)) 8581 if (!pm_cfb_enabled) { 8582 PMD(PMD_ERROR | PMD_CFB, 8583 ("%s: !pm_cfb_enabled, fails\n", pmf)) 8584 *errnop = EINVAL; 8585 *iresp = DDI_FAILURE; 8586 ret = DDI_FAILURE; 8587 goto post_notify; 8588 } 8589 mutex_enter(&pm_cfb_lock); 8590 while (cfb_inuse) { 8591 mutex_exit(&pm_cfb_lock); 8592 if (delay_sig(1) == EINTR) { 8593 ret = DDI_FAILURE; 8594 *iresp = DDI_FAILURE; 8595 *errnop = EINTR; 8596 goto post_notify; 8597 } 8598 mutex_enter(&pm_cfb_lock); 8599 } 8600 mutex_exit(&pm_cfb_lock); 8601 } 8602 break; 8603 case PM_LEVEL_DOWNONLY: 8604 /* Powering down */ 8605 thresh = cur_threshold(dip, comp); 8606 idletime = gethrestime_sec() - cp->pmc_timestamp; 8607 if (scan && ((PM_KUC(dip) != 0) || 8608 (cp->pmc_busycount > 0) || (idletime < thresh))) { 8609 #ifdef DEBUG 8610 if (DEVI(dip)->devi_pm_kidsupcnt != 0) 8611 PMD(PMD_SET, ("%s: scan failed: " 8612 "kidsupcnt != 0\n", pmf)) 8613 if (cp->pmc_busycount > 0) 8614 PMD(PMD_SET, ("%s: scan failed: " 8615 "device become busy\n", pmf)) 8616 if (idletime < thresh) 8617 PMD(PMD_SET, ("%s: scan failed: device " 8618 "hasn't been idle long enough\n", pmf)) 8619 #endif 8620 *iresp = DDI_FAILURE; 8621 *errnop = EBUSY; 8622 ret = DDI_FAILURE; 8623 goto post_notify; 8624 } else if (clevel != PM_LEVEL_UNKNOWN && clevel <= nlevel) { 8625 PMD(PMD_SET, ("%s: current level is already at " 8626 "or below the requested level.\n", pmf)) 8627 *iresp = DDI_SUCCESS; 8628 ret = DDI_SUCCESS; 8629 goto post_notify; 8630 } 8631 break; 8632 } 8633 8634 if (PM_IS_CFB(dip) && (comps_off_incr = 8635 calc_cfb_comps_incr(dip, comp, clevel, nlevel)) > 0) { 8636 /* 8637 * Pre-adjust pm_cfb_comps_off if lowering a console fb 8638 * component from full power. Remember that we tried to 8639 * lower power in case it fails and we need to back out 8640 * the adjustment. 8641 */ 8642 update_comps_off(comps_off_incr, dip); 8643 PMD(PMD_CFB, ("%s: %s@%s(%s#%d)[%d] %d->%d cfb_comps_off->%d\n", 8644 pmf, PM_DEVICE(dip), comp, clevel, nlevel, 8645 pm_cfb_comps_off)) 8646 } 8647 8648 if ((*iresp = power_dev(dip, 8649 comp, nlevel, clevel, canblock, &devl)) == DDI_SUCCESS) { 8650 #ifdef DEBUG 8651 /* 8652 * All descendents of this node should already be powered off. 8653 */ 8654 if (PM_CURPOWER(dip, comp) == 0) { 8655 pm_desc_pwrchk_t pdpchk; 8656 pdpchk.pdpc_dip = dip; 8657 pdpchk.pdpc_par_involved = PM_WANTS_NOTIFICATION(dip); 8658 ndi_devi_enter(dip, &circ_db); 8659 for (cdip = ddi_get_child(dip); cdip != NULL; 8660 cdip = ddi_get_next_sibling(cdip)) { 8661 ndi_devi_enter(cdip, &ccirc_db); 8662 ddi_walk_devs(cdip, pm_desc_pwrchk_walk, 8663 (void *)&pdpchk); 8664 ndi_devi_exit(cdip, ccirc_db); 8665 } 8666 ndi_devi_exit(dip, circ_db); 8667 } 8668 #endif 8669 /* 8670 * Post-adjust pm_cfb_comps_off if we brought an fb component 8671 * back up to full power. 8672 */ 8673 if (PM_IS_CFB(dip) && comps_off_incr < 0) { 8674 update_comps_off(comps_off_incr, dip); 8675 PMD(PMD_CFB, ("%s: %s@%s(%s#%d)[%d] %d->%d " 8676 "cfb_comps_off->%d\n", pmf, PM_DEVICE(dip), 8677 comp, clevel, nlevel, pm_cfb_comps_off)) 8678 } 8679 dodeps = 0; 8680 if (POWERING_OFF(clevel, nlevel)) { 8681 if (PM_ISBC(dip)) { 8682 dodeps = (comp == 0); 8683 } else { 8684 int i; 8685 dodeps = 1; 8686 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 8687 /* if some component still on */ 8688 if (PM_CURPOWER(dip, i)) { 8689 dodeps = 0; 8690 break; 8691 } 8692 } 8693 } 8694 if (dodeps) 8695 work_type = PM_DEP_WK_POWER_OFF; 8696 } else if (POWERING_ON(clevel, nlevel)) { 8697 if (PM_ISBC(dip)) { 8698 dodeps = (comp == 0); 8699 } else { 8700 int i; 8701 dodeps = 1; 8702 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 8703 if (i == comp) 8704 continue; 8705 if (PM_CURPOWER(dip, i) > 0) { 8706 dodeps = 0; 8707 break; 8708 } 8709 } 8710 } 8711 if (dodeps) 8712 work_type = PM_DEP_WK_POWER_ON; 8713 } 8714 8715 if (dodeps) { 8716 char *pathbuf = kmem_alloc(MAXPATHLEN, KM_SLEEP); 8717 8718 (void) ddi_pathname(dip, pathbuf); 8719 pm_dispatch_to_dep_thread(work_type, pathbuf, NULL, 8720 PM_DEP_NOWAIT, NULL, 0); 8721 kmem_free(pathbuf, MAXPATHLEN); 8722 } 8723 if ((PM_CURPOWER(dip, comp) == nlevel) && pm_watchers()) { 8724 int old; 8725 8726 /* If old power cached during deadlock, use it. */ 8727 old = (cp->pmc_flags & PM_PHC_WHILE_SET_POWER ? 8728 cp->pmc_phc_pwr : olevel); 8729 mutex_enter(&pm_rsvp_lock); 8730 pm_enqueue_notify(PSC_HAS_CHANGED, dip, comp, nlevel, 8731 old, canblock); 8732 pm_enqueue_notify_others(&devl, canblock); 8733 mutex_exit(&pm_rsvp_lock); 8734 } 8735 8736 /* 8737 * If we are coming from a scan, don't do it again, 8738 * else we can have infinite loops. 8739 */ 8740 if (!scan) 8741 pm_rescan(dip); 8742 } else { 8743 /* if we incremented pm_comps_off_count, but failed */ 8744 if (comps_off_incr > 0) { 8745 update_comps_off(-comps_off_incr, dip); 8746 PMD(PMD_CFB, ("%s: %s@%s(%s#%d)[%d] %d->%d " 8747 "cfb_comps_off->%d\n", pmf, PM_DEVICE(dip), 8748 comp, clevel, nlevel, pm_cfb_comps_off)) 8749 } 8750 *errnop = EIO; 8751 } 8752 8753 post_notify: 8754 /* 8755 * This thread may have been in deadlock with pm_power_has_changed. 8756 * Before releasing power lock, clear the flag which marks this 8757 * condition. 8758 */ 8759 cp->pmc_flags &= ~PM_PHC_WHILE_SET_POWER; 8760 8761 /* 8762 * Update the old power level in the bus power structure with the 8763 * actual power level before the transition was made to the new level. 8764 * Some involved parents depend on this information to keep track of 8765 * their children's power transition. 8766 */ 8767 if (*iresp != DDI_FAILURE) 8768 bpc->bpc_olevel = clevel; 8769 8770 if (PM_WANTS_NOTIFICATION(pdip)) { 8771 ret = (*PM_BUS_POWER_FUNC(pdip))(pdip, NULL, 8772 BUS_POWER_POST_NOTIFICATION, bpc, resultp); 8773 PM_UNLOCK_POWER(dip, circ); 8774 PMD(PMD_SET, ("%s: post_notify %s@%s(%s#%d) for " 8775 "child %s@%s(%s#%d), ret=%d\n", pmf, PM_DEVICE(pdip), 8776 PM_DEVICE(dip), ret)) 8777 } else { 8778 nlevel = cur_power(cp); /* in case phc deadlock updated pwr */ 8779 PM_UNLOCK_POWER(dip, circ); 8780 /* 8781 * Now that we know what power transition has occurred 8782 * (if any), release the power hold. Leave the hold 8783 * in effect in the case of OFF->ON transition. 8784 */ 8785 if (!(clevel == 0 && nlevel > 0 && 8786 (!PM_ISBC(dip) || comp == 0))) 8787 pm_rele_power(pdip); 8788 /* 8789 * If the power transition was an ON->OFF transition, 8790 * remove the power hold from the parent. 8791 */ 8792 if ((clevel > 0 || clevel == PM_LEVEL_UNKNOWN) && 8793 nlevel == 0 && (!PM_ISBC(dip) || comp == 0)) 8794 pm_rele_power(pdip); 8795 } 8796 if (*iresp != DDI_SUCCESS || ret != DDI_SUCCESS) 8797 return (DDI_FAILURE); 8798 else 8799 return (DDI_SUCCESS); 8800 } 8801 8802 /* 8803 * If an app (SunVTS or Xsun) has taken control, then block until it 8804 * gives it up or makes the requested power level change, unless 8805 * we have other instructions about blocking. Returns DDI_SUCCESS, 8806 * DDI_FAILURE or EAGAIN (owner released device from directpm). 8807 */ 8808 static int 8809 pm_busop_match_request(dev_info_t *dip, void *arg) 8810 { 8811 PMD_FUNC(pmf, "bp_match_request") 8812 pm_bp_child_pwrchg_t *bpc = (pm_bp_child_pwrchg_t *)arg; 8813 pm_sp_misc_t *pspm = (pm_sp_misc_t *)bpc->bpc_private; 8814 int comp = bpc->bpc_comp; 8815 int nlevel = bpc->bpc_nlevel; 8816 pm_canblock_t canblock = pspm->pspm_canblock; 8817 int direction = pspm->pspm_direction; 8818 int clevel, circ; 8819 8820 ASSERT(PM_IAM_LOCKING_DIP(dip)); 8821 PM_LOCK_POWER(dip, &circ); 8822 clevel = PM_CURPOWER(dip, comp); 8823 PMD(PMD_SET, ("%s: %s@%s(%s#%d), cmp=%d, nlvl=%d, clvl=%d\n", 8824 pmf, PM_DEVICE(dip), comp, nlevel, clevel)) 8825 if (direction == PM_LEVEL_UPONLY) { 8826 if (clevel >= nlevel) { 8827 PM_UNLOCK_POWER(dip, circ); 8828 PM_UNLOCK_DIP(dip); 8829 return (DDI_SUCCESS); 8830 } 8831 } else if (clevel == nlevel) { 8832 PM_UNLOCK_POWER(dip, circ); 8833 PM_UNLOCK_DIP(dip); 8834 return (DDI_SUCCESS); 8835 } 8836 if (canblock == PM_CANBLOCK_FAIL) { 8837 PM_UNLOCK_POWER(dip, circ); 8838 PM_UNLOCK_DIP(dip); 8839 return (DDI_FAILURE); 8840 } 8841 if (canblock == PM_CANBLOCK_BLOCK) { 8842 /* 8843 * To avoid a deadlock, we must not hold the 8844 * power lock when we pm_block. 8845 */ 8846 PM_UNLOCK_POWER(dip, circ); 8847 PMD(PMD_SET, ("%s: blocking\n", pmf)) 8848 /* pm_block releases dip lock */ 8849 switch (pm_block(dip, comp, nlevel, clevel)) { 8850 case PMP_RELEASE: 8851 return (EAGAIN); 8852 case PMP_SUCCEED: 8853 return (DDI_SUCCESS); 8854 case PMP_FAIL: 8855 return (DDI_FAILURE); 8856 } 8857 } else { 8858 ASSERT(0); 8859 } 8860 _NOTE(NOTREACHED); 8861 return (DDI_FAILURE); /* keep gcc happy */ 8862 } 8863 8864 static int 8865 pm_all_to_normal_nexus(dev_info_t *dip, pm_canblock_t canblock) 8866 { 8867 PMD_FUNC(pmf, "all_to_normal_nexus") 8868 int *normal; 8869 int i, ncomps; 8870 size_t size; 8871 int changefailed = 0; 8872 int ret, result = DDI_SUCCESS; 8873 pm_bp_nexus_pwrup_t bpn; 8874 pm_sp_misc_t pspm; 8875 8876 ASSERT(PM_GET_PM_INFO(dip)); 8877 PMD(PMD_ALLNORM, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 8878 if (pm_get_norm_pwrs(dip, &normal, &size) != DDI_SUCCESS) { 8879 PMD(PMD_ALLNORM, ("%s: can't get norm pwrs\n", pmf)) 8880 return (DDI_FAILURE); 8881 } 8882 ncomps = PM_NUMCMPTS(dip); 8883 for (i = 0; i < ncomps; i++) { 8884 bpn.bpn_dip = dip; 8885 bpn.bpn_comp = i; 8886 bpn.bpn_level = normal[i]; 8887 pspm.pspm_canblock = canblock; 8888 pspm.pspm_scan = 0; 8889 bpn.bpn_private = &pspm; 8890 ret = pm_busop_bus_power(dip, NULL, BUS_POWER_NEXUS_PWRUP, 8891 (void *)&bpn, (void *)&result); 8892 if (ret != DDI_SUCCESS || result != DDI_SUCCESS) { 8893 PMD(PMD_FAIL | PMD_ALLNORM, ("%s: %s@%s(%s#%d)[%d] " 8894 "->%d failure result %d\n", pmf, PM_DEVICE(dip), 8895 i, normal[i], result)) 8896 changefailed++; 8897 } 8898 } 8899 kmem_free(normal, size); 8900 if (changefailed) { 8901 PMD(PMD_FAIL, ("%s: failed to set %d comps %s@%s(%s#%d) " 8902 "full power\n", pmf, changefailed, PM_DEVICE(dip))) 8903 return (DDI_FAILURE); 8904 } 8905 return (DDI_SUCCESS); 8906 } 8907 8908 int 8909 pm_noinvol_update(int subcmd, int volpmd, int wasvolpmd, char *path, 8910 dev_info_t *tdip) 8911 { 8912 PMD_FUNC(pmf, "noinvol_update") 8913 pm_bp_noinvol_t args; 8914 int ret; 8915 int result = DDI_SUCCESS; 8916 8917 args.bpni_path = path; 8918 args.bpni_dip = tdip; 8919 args.bpni_cmd = subcmd; 8920 args.bpni_wasvolpmd = wasvolpmd; 8921 args.bpni_volpmd = volpmd; 8922 PMD(PMD_NOINVOL, ("%s: update for path %s tdip %p subcmd %d " 8923 "volpmd %d wasvolpmd %d\n", pmf, 8924 path, (void *)tdip, subcmd, wasvolpmd, volpmd)) 8925 ret = pm_busop_bus_power(ddi_root_node(), NULL, BUS_POWER_NOINVOL, 8926 &args, &result); 8927 return (ret); 8928 } 8929 8930 void 8931 pm_noinvol_update_node(dev_info_t *dip, pm_bp_noinvol_t *req) 8932 { 8933 PMD_FUNC(pmf, "noinvol_update_node") 8934 8935 PMD(PMD_NOINVOL, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 8936 switch (req->bpni_cmd) { 8937 case PM_BP_NOINVOL_ATTACH: 8938 PMD(PMD_NOINVOL, ("%s: PM_PB_NOINVOL_ATTACH %s@%s(%s#%d) " 8939 "noinvol %d->%d\n", pmf, PM_DEVICE(dip), 8940 DEVI(dip)->devi_pm_noinvolpm, 8941 DEVI(dip)->devi_pm_noinvolpm - 1)) 8942 ASSERT(DEVI(dip)->devi_pm_noinvolpm); 8943 PM_LOCK_DIP(dip); 8944 DEVI(dip)->devi_pm_noinvolpm--; 8945 if (req->bpni_wasvolpmd) { 8946 PMD(PMD_NOINVOL, ("%s: PM_BP_NOINVOL_ATTACH " 8947 "%s@%s(%s#%d) volpmd %d->%d\n", pmf, 8948 PM_DEVICE(dip), DEVI(dip)->devi_pm_volpmd, 8949 DEVI(dip)->devi_pm_volpmd - 1)) 8950 if (DEVI(dip)->devi_pm_volpmd) 8951 DEVI(dip)->devi_pm_volpmd--; 8952 } 8953 PM_UNLOCK_DIP(dip); 8954 break; 8955 8956 case PM_BP_NOINVOL_DETACH: 8957 PMD(PMD_NOINVOL, ("%s: PM_BP_NOINVOL_DETACH %s@%s(%s#%d) " 8958 "noinvolpm %d->%d\n", pmf, PM_DEVICE(dip), 8959 DEVI(dip)->devi_pm_noinvolpm, 8960 DEVI(dip)->devi_pm_noinvolpm + 1)) 8961 PM_LOCK_DIP(dip); 8962 DEVI(dip)->devi_pm_noinvolpm++; 8963 if (req->bpni_wasvolpmd) { 8964 PMD(PMD_NOINVOL, ("%s: PM_BP_NOINVOL_DETACH " 8965 "%s@%s(%s#%d) volpmd %d->%d\n", pmf, 8966 PM_DEVICE(dip), DEVI(dip)->devi_pm_volpmd, 8967 DEVI(dip)->devi_pm_volpmd + 1)) 8968 DEVI(dip)->devi_pm_volpmd++; 8969 } 8970 PM_UNLOCK_DIP(dip); 8971 break; 8972 8973 case PM_BP_NOINVOL_REMDRV: 8974 PMD(PMD_NOINVOL, ("%s: PM_BP_NOINVOL_REMDRV %s@%s(%s#%d) " 8975 "noinvol %d->%d\n", pmf, PM_DEVICE(dip), 8976 DEVI(dip)->devi_pm_noinvolpm, 8977 DEVI(dip)->devi_pm_noinvolpm - 1)) 8978 ASSERT(DEVI(dip)->devi_pm_noinvolpm); 8979 PM_LOCK_DIP(dip); 8980 DEVI(dip)->devi_pm_noinvolpm--; 8981 if (req->bpni_wasvolpmd) { 8982 PMD(PMD_NOINVOL, 8983 ("%s: PM_BP_NOINVOL_REMDRV %s@%s(%s#%d) " 8984 "volpmd %d->%d\n", pmf, PM_DEVICE(dip), 8985 DEVI(dip)->devi_pm_volpmd, 8986 DEVI(dip)->devi_pm_volpmd - 1)) 8987 /* 8988 * A power up could come in between and 8989 * clear the volpmd, if that's the case, 8990 * volpmd would be clear. 8991 */ 8992 if (DEVI(dip)->devi_pm_volpmd) 8993 DEVI(dip)->devi_pm_volpmd--; 8994 } 8995 PM_UNLOCK_DIP(dip); 8996 break; 8997 8998 case PM_BP_NOINVOL_CFB: 8999 PMD(PMD_NOINVOL, 9000 ("%s: PM_BP_NOIVOL_CFB %s@%s(%s#%d) noinvol %d->%d\n", 9001 pmf, PM_DEVICE(dip), DEVI(dip)->devi_pm_noinvolpm, 9002 DEVI(dip)->devi_pm_noinvolpm + 1)) 9003 PM_LOCK_DIP(dip); 9004 DEVI(dip)->devi_pm_noinvolpm++; 9005 PM_UNLOCK_DIP(dip); 9006 break; 9007 9008 case PM_BP_NOINVOL_POWER: 9009 PMD(PMD_NOINVOL, 9010 ("%s: PM_BP_NOIVOL_PWR %s@%s(%s#%d) volpmd %d->%d\n", 9011 pmf, PM_DEVICE(dip), 9012 DEVI(dip)->devi_pm_volpmd, DEVI(dip)->devi_pm_volpmd - 9013 req->bpni_volpmd)) 9014 PM_LOCK_DIP(dip); 9015 DEVI(dip)->devi_pm_volpmd -= req->bpni_volpmd; 9016 PM_UNLOCK_DIP(dip); 9017 break; 9018 9019 default: 9020 break; 9021 } 9022 9023 } 9024 9025 #ifdef DEBUG 9026 static int 9027 pm_desc_pwrchk_walk(dev_info_t *dip, void *arg) 9028 { 9029 PMD_FUNC(pmf, "desc_pwrchk") 9030 pm_desc_pwrchk_t *pdpchk = (pm_desc_pwrchk_t *)arg; 9031 pm_info_t *info = PM_GET_PM_INFO(dip); 9032 int i, curpwr, ce_level; 9033 9034 if (!info) 9035 return (DDI_WALK_CONTINUE); 9036 9037 PMD(PMD_SET, ("%s: %s@%s(%s#%d)\n", pmf, PM_DEVICE(dip))) 9038 for (i = 0; i < PM_NUMCMPTS(dip); i++) { 9039 if ((curpwr = PM_CURPOWER(dip, i)) == 0) 9040 continue; 9041 ce_level = (pdpchk->pdpc_par_involved == 0) ? CE_PANIC : 9042 CE_WARN; 9043 PMD(PMD_SET, ("%s: %s@%s(%s#%d) is powered off while desc " 9044 "%s@%s(%s#%d)[%d] is at %d\n", pmf, 9045 PM_DEVICE(pdpchk->pdpc_dip), PM_DEVICE(dip), i, curpwr)) 9046 cmn_err(ce_level, "!device %s@%s(%s#%d) is powered on, " 9047 "while its ancestor, %s@%s(%s#%d), is powering off!", 9048 PM_DEVICE(dip), PM_DEVICE(pdpchk->pdpc_dip)); 9049 } 9050 return (DDI_WALK_CONTINUE); 9051 } 9052 #endif 9053 9054 /* 9055 * Record the fact that one thread is borrowing the lock on a device node. 9056 * Use is restricted to the case where the lending thread will block until 9057 * the borrowing thread (always curthread) completes. 9058 */ 9059 void 9060 pm_borrow_lock(kthread_t *lender) 9061 { 9062 lock_loan_t *prev = &lock_loan_head; 9063 lock_loan_t *cur = (lock_loan_t *)kmem_zalloc(sizeof (*cur), KM_SLEEP); 9064 9065 cur->pmlk_borrower = curthread; 9066 cur->pmlk_lender = lender; 9067 mutex_enter(&pm_loan_lock); 9068 cur->pmlk_next = prev->pmlk_next; 9069 prev->pmlk_next = cur; 9070 mutex_exit(&pm_loan_lock); 9071 } 9072 9073 /* 9074 * Return the borrowed lock. A thread can borrow only one. 9075 */ 9076 void 9077 pm_return_lock(void) 9078 { 9079 lock_loan_t *cur; 9080 lock_loan_t *prev = &lock_loan_head; 9081 9082 mutex_enter(&pm_loan_lock); 9083 ASSERT(prev->pmlk_next != NULL); 9084 for (cur = prev->pmlk_next; cur; prev = cur, cur = cur->pmlk_next) 9085 if (cur->pmlk_borrower == curthread) 9086 break; 9087 9088 ASSERT(cur != NULL); 9089 prev->pmlk_next = cur->pmlk_next; 9090 mutex_exit(&pm_loan_lock); 9091 kmem_free(cur, sizeof (*cur)); 9092 } 9093