xref: /titanic_41/usr/src/uts/common/os/policy.c (revision 391647d5ee9b25dc5307abb55f583388e08b2dd7)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <sys/types.h>
27 #include <sys/sysmacros.h>
28 #include <sys/param.h>
29 #include <sys/systm.h>
30 #include <sys/cred_impl.h>
31 #include <sys/vnode.h>
32 #include <sys/vfs.h>
33 #include <sys/stat.h>
34 #include <sys/errno.h>
35 #include <sys/kmem.h>
36 #include <sys/user.h>
37 #include <sys/proc.h>
38 #include <sys/acct.h>
39 #include <sys/ipc_impl.h>
40 #include <sys/cmn_err.h>
41 #include <sys/debug.h>
42 #include <sys/policy.h>
43 #include <sys/kobj.h>
44 #include <sys/msg.h>
45 #include <sys/devpolicy.h>
46 #include <c2/audit.h>
47 #include <sys/varargs.h>
48 #include <sys/klpd.h>
49 #include <sys/modctl.h>
50 #include <sys/disp.h>
51 #include <sys/zone.h>
52 #include <inet/optcom.h>
53 #include <sys/sdt.h>
54 #include <sys/vfs.h>
55 #include <sys/mntent.h>
56 #include <sys/contract_impl.h>
57 
58 /*
59  * There are two possible layers of privilege routines and two possible
60  * levels of secpolicy.  Plus one other we may not be interested in, so
61  * we may need as many as 6 but no more.
62  */
63 #define	MAXPRIVSTACK		6
64 
65 int priv_debug = 0;
66 
67 /*
68  * This file contains the majority of the policy routines.
69  * Since the policy routines are defined by function and not
70  * by privilege, there is quite a bit of duplication of
71  * functions.
72  *
73  * The secpolicy functions must not make assumptions about
74  * locks held or not held as any lock can be held while they're
75  * being called.
76  *
77  * Credentials are read-only so no special precautions need to
78  * be taken while locking them.
79  *
80  * When a new policy check needs to be added to the system the
81  * following procedure should be followed:
82  *
83  *		Pick an appropriate secpolicy_*() function
84  *			-> done if one exists.
85  *		Create a new secpolicy function, preferably with
86  *		a descriptive name using the standard template.
87  *		Pick an appropriate privilege for the policy.
88  *		If no appropraite privilege exists, define new one
89  *		(this should be done with extreme care; in most cases
90  *		little is gained by adding another privilege)
91  *
92  * WHY ROOT IS STILL SPECIAL.
93  *
94  * In a number of the policy functions, there are still explicit
95  * checks for uid 0.  The rationale behind these is that many root
96  * owned files/objects hold configuration information which can give full
97  * privileges to the user once written to.  To prevent escalation
98  * of privilege by allowing just a single privilege to modify root owned
99  * objects, we've added these root specific checks where we considered
100  * them necessary: modifying root owned files, changing uids to 0, etc.
101  *
102  * PRIVILEGE ESCALATION AND ZONES.
103  *
104  * A number of operations potentially allow the caller to achieve
105  * privileges beyond the ones normally required to perform the operation.
106  * For example, if allowed to create a setuid 0 executable, a process can
107  * gain privileges beyond PRIV_FILE_SETID.  Zones, however, place
108  * restrictions on the ability to gain privileges beyond those available
109  * within the zone through file and process manipulation.  Hence, such
110  * operations require that the caller have an effective set that includes
111  * all privileges available within the current zone, or all privileges
112  * if executing in the global zone.
113  *
114  * This is indicated in the priv_policy* policy checking functions
115  * through a combination of parameters.  The "priv" parameter indicates
116  * the privilege that is required, and the "allzone" parameter indicates
117  * whether or not all privileges in the zone are required.  In addition,
118  * priv can be set to PRIV_ALL to indicate that all privileges are
119  * required (regardless of zone).  There are three scenarios of interest:
120  * (1) operation requires a specific privilege
121  * (2) operation requires a specific privilege, and requires all
122  *     privileges available within the zone (or all privileges if in
123  *     the global zone)
124  * (3) operation requires all privileges, regardless of zone
125  *
126  * For (1), priv should be set to the specific privilege, and allzone
127  * should be set to B_FALSE.
128  * For (2), priv should be set to the specific privilege, and allzone
129  * should be set to B_TRUE.
130  * For (3), priv should be set to PRIV_ALL, and allzone should be set
131  * to B_FALSE.
132  *
133  */
134 
135 /*
136  * The privileges are checked against the Effective set for
137  * ordinary processes and checked against the Limit set
138  * for euid 0 processes that haven't manipulated their privilege
139  * sets.
140  */
141 #define	HAS_ALLPRIVS(cr)	priv_isfullset(&CR_OEPRIV(cr))
142 #define	ZONEPRIVS(cr)		((cr)->cr_zone->zone_privset)
143 #define	HAS_ALLZONEPRIVS(cr)	priv_issubset(ZONEPRIVS(cr), &CR_OEPRIV(cr))
144 #define	HAS_PRIVILEGE(cr, pr)	((pr) == PRIV_ALL ? \
145 					HAS_ALLPRIVS(cr) : \
146 					PRIV_ISASSERT(&CR_OEPRIV(cr), pr))
147 
148 /*
149  * Policy checking functions.
150  *
151  * All of the system's policy should be implemented here.
152  */
153 
154 /*
155  * Private functions which take an additional va_list argument to
156  * implement an object specific policy override.
157  */
158 static int priv_policy_ap(const cred_t *, int, boolean_t, int,
159     const char *, va_list);
160 static int priv_policy_va(const cred_t *, int, boolean_t, int,
161     const char *, ...);
162 
163 /*
164  * Generic policy calls
165  *
166  * The "bottom" functions of policy control
167  */
168 static char *
169 mprintf(const char *fmt, ...)
170 {
171 	va_list args;
172 	char *buf;
173 	size_t len;
174 
175 	va_start(args, fmt);
176 	len = vsnprintf(NULL, 0, fmt, args) + 1;
177 	va_end(args);
178 
179 	buf = kmem_alloc(len, KM_NOSLEEP);
180 
181 	if (buf == NULL)
182 		return (NULL);
183 
184 	va_start(args, fmt);
185 	(void) vsnprintf(buf, len, fmt, args);
186 	va_end(args);
187 
188 	return (buf);
189 }
190 
191 /*
192  * priv_policy_errmsg()
193  *
194  * Generate an error message if privilege debugging is enabled system wide
195  * or for this particular process.
196  */
197 
198 #define	FMTHDR	"%s[%d]: missing privilege \"%s\" (euid = %d, syscall = %d)"
199 #define	FMTMSG	" for \"%s\""
200 #define	FMTFUN	" needed at %s+0x%lx"
201 
202 /* The maximum size privilege format: the concatenation of the above */
203 #define	FMTMAX	FMTHDR FMTMSG FMTFUN "\n"
204 
205 static void
206 priv_policy_errmsg(const cred_t *cr, int priv, const char *msg)
207 {
208 	struct proc *me;
209 	pc_t stack[MAXPRIVSTACK];
210 	int depth;
211 	int i;
212 	char *sym;
213 	ulong_t off;
214 	const char *pname;
215 
216 	char *cmd;
217 	char fmt[sizeof (FMTMAX)];
218 
219 	if ((me = curproc) == &p0)
220 		return;
221 
222 	/* Privileges must be defined  */
223 	ASSERT(priv == PRIV_ALL || priv == PRIV_MULTIPLE ||
224 	    priv == PRIV_ALLZONE || priv == PRIV_GLOBAL ||
225 	    priv_getbynum(priv) != NULL);
226 
227 	if (priv == PRIV_ALLZONE && INGLOBALZONE(me))
228 		priv = PRIV_ALL;
229 
230 	if (curthread->t_pre_sys)
231 		ttolwp(curthread)->lwp_badpriv = (short)priv;
232 
233 	if (priv_debug == 0 && (CR_FLAGS(cr) & PRIV_DEBUG) == 0)
234 		return;
235 
236 	(void) strcpy(fmt, FMTHDR);
237 
238 	if (me->p_user.u_comm[0])
239 		cmd = &me->p_user.u_comm[0];
240 	else
241 		cmd = "priv_policy";
242 
243 	if (msg != NULL && *msg != '\0') {
244 		(void) strcat(fmt, FMTMSG);
245 	} else {
246 		(void) strcat(fmt, "%s");
247 		msg = "";
248 	}
249 
250 	sym = NULL;
251 
252 	depth = getpcstack(stack, MAXPRIVSTACK);
253 
254 	/*
255 	 * Try to find the first interesting function on the stack.
256 	 * priv_policy* that's us, so completely uninteresting.
257 	 * suser(), drv_priv(), secpolicy_* are also called from
258 	 * too many locations to convey useful information.
259 	 */
260 	for (i = 0; i < depth; i++) {
261 		sym = kobj_getsymname((uintptr_t)stack[i], &off);
262 		if (sym != NULL &&
263 		    strstr(sym, "hasprocperm") == 0 &&
264 		    strcmp("suser", sym) != 0 &&
265 		    strcmp("ipcaccess", sym) != 0 &&
266 		    strcmp("drv_priv", sym) != 0 &&
267 		    strncmp("secpolicy_", sym, 10) != 0 &&
268 		    strncmp("priv_policy", sym, 11) != 0)
269 			break;
270 	}
271 
272 	if (sym != NULL)
273 		(void) strcat(fmt, FMTFUN);
274 
275 	(void) strcat(fmt, "\n");
276 
277 	switch (priv) {
278 	case PRIV_ALL:
279 		pname = "ALL";
280 		break;
281 	case PRIV_MULTIPLE:
282 		pname = "MULTIPLE";
283 		break;
284 	case PRIV_ALLZONE:
285 		pname = "ZONE";
286 		break;
287 	case PRIV_GLOBAL:
288 		pname = "GLOBAL";
289 		break;
290 	default:
291 		pname = priv_getbynum(priv);
292 		break;
293 	}
294 
295 	if (CR_FLAGS(cr) & PRIV_DEBUG) {
296 		/* Remember last message, just like lwp_badpriv. */
297 		if (curthread->t_pdmsg != NULL) {
298 			kmem_free(curthread->t_pdmsg,
299 			    strlen(curthread->t_pdmsg) + 1);
300 		}
301 
302 		curthread->t_pdmsg = mprintf(fmt, cmd, me->p_pid, pname,
303 		    cr->cr_uid, curthread->t_sysnum, msg, sym, off);
304 
305 		curthread->t_post_sys = 1;
306 	}
307 	if (priv_debug) {
308 		cmn_err(CE_NOTE, fmt, cmd, me->p_pid, pname, cr->cr_uid,
309 		    curthread->t_sysnum, msg, sym, off);
310 	}
311 }
312 
313 /*
314  * Override the policy, if appropriate.  Return 0 if the external
315  * policy engine approves.
316  */
317 static int
318 priv_policy_override(const cred_t *cr, int priv, boolean_t allzone, va_list ap)
319 {
320 	priv_set_t set;
321 	int ret;
322 
323 	if (!(CR_FLAGS(cr) & PRIV_XPOLICY))
324 		return (-1);
325 
326 	if (priv == PRIV_ALL) {
327 		priv_fillset(&set);
328 	} else if (allzone) {
329 		set = *ZONEPRIVS(cr);
330 	} else {
331 		priv_emptyset(&set);
332 		priv_addset(&set, priv);
333 	}
334 	ret = klpd_call(cr, &set, ap);
335 	return (ret);
336 }
337 
338 static int
339 priv_policy_override_set(const cred_t *cr, const priv_set_t *req, ...)
340 {
341 	va_list ap;
342 
343 	if (CR_FLAGS(cr) & PRIV_XPOLICY) {
344 		va_start(ap, req);
345 		return (klpd_call(cr, req, ap));
346 	}
347 	return (-1);
348 }
349 
350 /*
351  * Audit failure, log error message.
352  */
353 static void
354 priv_policy_err(const cred_t *cr, int priv, boolean_t allzone, const char *msg)
355 {
356 
357 	if (audit_active)
358 		audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 0);
359 	DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
360 
361 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) ||
362 	    curthread->t_pre_sys) {
363 		if (allzone && !HAS_ALLZONEPRIVS(cr)) {
364 			priv_policy_errmsg(cr, PRIV_ALLZONE, msg);
365 		} else {
366 			ASSERT(!HAS_PRIVILEGE(cr, priv));
367 			priv_policy_errmsg(cr, priv, msg);
368 		}
369 	}
370 }
371 
372 /*
373  * priv_policy_ap()
374  * return 0 or error.
375  * See block comment above for a description of "priv" and "allzone" usage.
376  */
377 static int
378 priv_policy_ap(const cred_t *cr, int priv, boolean_t allzone, int err,
379     const char *msg, va_list ap)
380 {
381 	if ((HAS_PRIVILEGE(cr, priv) && (!allzone || HAS_ALLZONEPRIVS(cr))) ||
382 	    (!servicing_interrupt() &&
383 	    priv_policy_override(cr, priv, allzone, ap) == 0)) {
384 		if ((allzone || priv == PRIV_ALL ||
385 		    !PRIV_ISASSERT(priv_basic, priv)) &&
386 		    !servicing_interrupt()) {
387 			PTOU(curproc)->u_acflag |= ASU; /* Needed for SVVS */
388 			if (audit_active)
389 				audit_priv(priv,
390 				    allzone ? ZONEPRIVS(cr) : NULL, 1);
391 		}
392 		err = 0;
393 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
394 	} else if (!servicing_interrupt()) {
395 		/* Failure audited in this procedure */
396 		priv_policy_err(cr, priv, allzone, msg);
397 	}
398 	return (err);
399 }
400 
401 int
402 priv_policy_va(const cred_t *cr, int priv, boolean_t allzone, int err,
403     const char *msg, ...)
404 {
405 	int ret;
406 	va_list ap;
407 
408 	va_start(ap, msg);
409 	ret = priv_policy_ap(cr, priv, allzone, err, msg, ap);
410 	va_end(ap);
411 
412 	return (ret);
413 }
414 
415 int
416 priv_policy(const cred_t *cr, int priv, boolean_t allzone, int err,
417     const char *msg)
418 {
419 	return (priv_policy_va(cr, priv, allzone, err, msg, KLPDARG_NOMORE));
420 }
421 
422 /*
423  * Return B_TRUE for sufficient privileges, B_FALSE for insufficient privileges.
424  */
425 boolean_t
426 priv_policy_choice(const cred_t *cr, int priv, boolean_t allzone)
427 {
428 	boolean_t res = HAS_PRIVILEGE(cr, priv) &&
429 	    (!allzone || HAS_ALLZONEPRIVS(cr));
430 
431 	/* Audit success only */
432 	if (res && audit_active &&
433 	    (allzone || priv == PRIV_ALL || !PRIV_ISASSERT(priv_basic, priv)) &&
434 	    !servicing_interrupt()) {
435 		audit_priv(priv, allzone ? ZONEPRIVS(cr) : NULL, 1);
436 	}
437 	if (res) {
438 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
439 	} else {
440 		DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
441 	}
442 	return (res);
443 }
444 
445 /*
446  * Non-auditing variant of priv_policy_choice().
447  */
448 boolean_t
449 priv_policy_only(const cred_t *cr, int priv, boolean_t allzone)
450 {
451 	boolean_t res = HAS_PRIVILEGE(cr, priv) &&
452 	    (!allzone || HAS_ALLZONEPRIVS(cr));
453 
454 	if (res) {
455 		DTRACE_PROBE2(priv__ok, int, priv, boolean_t, allzone);
456 	} else {
457 		DTRACE_PROBE2(priv__err, int, priv, boolean_t, allzone);
458 	}
459 	return (res);
460 }
461 
462 /*
463  * Check whether all privileges in the required set are present.
464  */
465 static int
466 secpolicy_require_set(const cred_t *cr, const priv_set_t *req, const char *msg)
467 {
468 	int priv;
469 	int pfound = -1;
470 	priv_set_t pset;
471 
472 	if (req == PRIV_FULLSET ? HAS_ALLPRIVS(cr) : priv_issubset(req,
473 	    &CR_OEPRIV(cr))) {
474 		return (0);
475 	}
476 
477 	if (priv_policy_override_set(cr, req, KLPDARG_NOMORE) == 0)
478 		return (0);
479 
480 	if (req == PRIV_FULLSET || priv_isfullset(req)) {
481 		priv_policy_err(cr, PRIV_ALL, B_FALSE, msg);
482 		return (EACCES);
483 	}
484 
485 	pset = CR_OEPRIV(cr);		/* present privileges */
486 	priv_inverse(&pset);		/* all non present privileges */
487 	priv_intersect(req, &pset);	/* the actual missing privs */
488 
489 	if (audit_active)
490 		audit_priv(PRIV_NONE, &pset, 0);
491 	/*
492 	 * Privilege debugging; special case "one privilege in set".
493 	 */
494 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) || curthread->t_pre_sys) {
495 		for (priv = 0; priv < nprivs; priv++) {
496 			if (priv_ismember(&pset, priv)) {
497 				if (pfound != -1) {
498 					/* Multiple missing privs */
499 					priv_policy_errmsg(cr, PRIV_MULTIPLE,
500 					    msg);
501 					return (EACCES);
502 				}
503 				pfound = priv;
504 			}
505 		}
506 		ASSERT(pfound != -1);
507 		/* Just the one missing privilege */
508 		priv_policy_errmsg(cr, pfound, msg);
509 	}
510 
511 	return (EACCES);
512 }
513 
514 /*
515  * Called when an operation requires that the caller be in the
516  * global zone, regardless of privilege.
517  */
518 static int
519 priv_policy_global(const cred_t *cr)
520 {
521 	if (crgetzoneid(cr) == GLOBAL_ZONEID)
522 		return (0);	/* success */
523 
524 	if (priv_debug || (CR_FLAGS(cr) & PRIV_DEBUG) ||
525 	    curthread->t_pre_sys) {
526 		priv_policy_errmsg(cr, PRIV_GLOBAL, NULL);
527 	}
528 	return (EPERM);
529 }
530 
531 /*
532  * Changing process priority
533  */
534 int
535 secpolicy_setpriority(const cred_t *cr)
536 {
537 	return (PRIV_POLICY(cr, PRIV_PROC_PRIOCNTL, B_FALSE, EPERM, NULL));
538 }
539 
540 /*
541  * Binding to a privileged port, port must be specified in host byte
542  * order.
543  */
544 int
545 secpolicy_net_privaddr(const cred_t *cr, in_port_t port, int proto)
546 {
547 	char *reason;
548 	int priv;
549 
550 	switch (port) {
551 	case 137:
552 	case 138:
553 	case 139:
554 	case 445:
555 		/*
556 		 * NBT and SMB ports, these are extra privileged ports,
557 		 * allow bind only if the SYS_SMB privilege is present.
558 		 */
559 		priv = PRIV_SYS_SMB;
560 		reason = "NBT or SMB port";
561 		break;
562 
563 	case 2049:
564 	case 4045:
565 		/*
566 		 * NFS ports, these are extra privileged ports, allow bind
567 		 * only if the SYS_NFS privilege is present.
568 		 */
569 		priv = PRIV_SYS_NFS;
570 		reason = "NFS port";
571 		break;
572 
573 	default:
574 		priv = PRIV_NET_PRIVADDR;
575 		reason = NULL;
576 		break;
577 
578 	}
579 
580 	return (priv_policy_va(cr, priv, B_FALSE, EACCES, reason,
581 	    KLPDARG_PORT, (int)proto, (int)port, KLPDARG_NOMORE));
582 }
583 
584 /*
585  * Binding to a multilevel port on a trusted (labeled) system.
586  */
587 int
588 secpolicy_net_bindmlp(const cred_t *cr)
589 {
590 	return (PRIV_POLICY(cr, PRIV_NET_BINDMLP, B_FALSE, EACCES, NULL));
591 }
592 
593 /*
594  * Allow a communication between a zone and an unlabeled host when their
595  * labels don't match.
596  */
597 int
598 secpolicy_net_mac_aware(const cred_t *cr)
599 {
600 	return (PRIV_POLICY(cr, PRIV_NET_MAC_AWARE, B_FALSE, EACCES, NULL));
601 }
602 
603 /*
604  * Common routine which determines whether a given credential can
605  * act on a given mount.
606  * When called through mount, the parameter needoptcheck is a pointer
607  * to a boolean variable which will be set to either true or false,
608  * depending on whether the mount policy should change the mount options.
609  * In all other cases, needoptcheck should be a NULL pointer.
610  */
611 static int
612 secpolicy_fs_common(cred_t *cr, vnode_t *mvp, const vfs_t *vfsp,
613     boolean_t *needoptcheck)
614 {
615 	boolean_t allzone = B_FALSE;
616 	boolean_t mounting = needoptcheck != NULL;
617 
618 	/*
619 	 * Short circuit the following cases:
620 	 *	vfsp == NULL or mvp == NULL (pure privilege check)
621 	 *	have all privileges - no further checks required
622 	 *	and no mount options need to be set.
623 	 */
624 	if (vfsp == NULL || mvp == NULL || HAS_ALLPRIVS(cr)) {
625 		if (mounting)
626 			*needoptcheck = B_FALSE;
627 
628 		return (priv_policy_va(cr, PRIV_SYS_MOUNT, allzone, EPERM,
629 		    NULL, KLPDARG_VNODE, mvp, (char *)NULL, KLPDARG_NOMORE));
630 	}
631 
632 	/*
633 	 * When operating on an existing mount (either we're not mounting
634 	 * or we're doing a remount and VFS_REMOUNT will be set), zones
635 	 * can operate only on mounts established by the zone itself.
636 	 */
637 	if (!mounting || (vfsp->vfs_flag & VFS_REMOUNT) != 0) {
638 		zoneid_t zoneid = crgetzoneid(cr);
639 
640 		if (zoneid != GLOBAL_ZONEID &&
641 		    vfsp->vfs_zone->zone_id != zoneid) {
642 			return (EPERM);
643 		}
644 	}
645 
646 	if (mounting)
647 		*needoptcheck = B_TRUE;
648 
649 	/*
650 	 * Overlay mounts may hide important stuff; if you can't write to a
651 	 * mount point but would be able to mount on top of it, you can
652 	 * escalate your privileges.
653 	 * So we go about asking the same questions namefs does when it
654 	 * decides whether you can mount over a file or not but with the
655 	 * added restriction that you can only mount on top of a regular
656 	 * file or directory.
657 	 * If we have all the zone's privileges, we skip all other checks,
658 	 * or else we may actually get in trouble inside the automounter.
659 	 */
660 	if ((mvp->v_flag & VROOT) != 0 ||
661 	    (mvp->v_type != VDIR && mvp->v_type != VREG) ||
662 	    HAS_ALLZONEPRIVS(cr)) {
663 		allzone = B_TRUE;
664 	} else {
665 		vattr_t va;
666 		int err;
667 
668 		va.va_mask = AT_UID|AT_MODE;
669 		err = VOP_GETATTR(mvp, &va, 0, cr, NULL);
670 		if (err != 0)
671 			return (err);
672 
673 		if ((err = secpolicy_vnode_owner(cr, va.va_uid)) != 0)
674 			return (err);
675 
676 		if ((va.va_mode & VWRITE) == 0 &&
677 		    secpolicy_vnode_access(cr, mvp, va.va_uid, VWRITE) != 0) {
678 			return (EACCES);
679 		}
680 	}
681 	return (priv_policy_va(cr, PRIV_SYS_MOUNT, allzone, EPERM,
682 	    NULL, KLPDARG_VNODE, mvp, (char *)NULL, KLPDARG_NOMORE));
683 }
684 
685 void
686 secpolicy_fs_mount_clearopts(cred_t *cr, struct vfs *vfsp)
687 {
688 	boolean_t amsuper = HAS_ALLZONEPRIVS(cr);
689 
690 	/*
691 	 * check; if we don't have either "nosuid" or
692 	 * both "nosetuid" and "nodevices", then we add
693 	 * "nosuid"; this depends on how the current
694 	 * implementation works (it first checks nosuid).  In a
695 	 * zone, a user with all zone privileges can mount with
696 	 * "setuid" but never with "devices".
697 	 */
698 	if (!vfs_optionisset(vfsp, MNTOPT_NOSUID, NULL) &&
699 	    (!vfs_optionisset(vfsp, MNTOPT_NODEVICES, NULL) ||
700 	    !vfs_optionisset(vfsp, MNTOPT_NOSETUID, NULL))) {
701 		if (crgetzoneid(cr) == GLOBAL_ZONEID || !amsuper)
702 			vfs_setmntopt(vfsp, MNTOPT_NOSUID, NULL, 0);
703 		else
704 			vfs_setmntopt(vfsp, MNTOPT_NODEVICES, NULL, 0);
705 	}
706 	/*
707 	 * If we're not the local super user, we set the "restrict"
708 	 * option to indicate to automountd that this mount should
709 	 * be handled with care.
710 	 */
711 	if (!amsuper)
712 		vfs_setmntopt(vfsp, MNTOPT_RESTRICT, NULL, 0);
713 
714 }
715 
716 extern vnode_t *rootvp;
717 extern vfs_t *rootvfs;
718 
719 int
720 secpolicy_fs_mount(cred_t *cr, vnode_t *mvp, struct vfs *vfsp)
721 {
722 	boolean_t needoptchk;
723 	int error;
724 
725 	/*
726 	 * If it's a remount, get the underlying mount point,
727 	 * except for the root where we use the rootvp.
728 	 */
729 	if ((vfsp->vfs_flag & VFS_REMOUNT) != 0) {
730 		if (vfsp == rootvfs)
731 			mvp = rootvp;
732 		else
733 			mvp = vfsp->vfs_vnodecovered;
734 	}
735 
736 	error = secpolicy_fs_common(cr, mvp, vfsp, &needoptchk);
737 
738 	if (error == 0 && needoptchk) {
739 		secpolicy_fs_mount_clearopts(cr, vfsp);
740 	}
741 
742 	return (error);
743 }
744 
745 /*
746  * Does the policy computations for "ownership" of a mount;
747  * here ownership is defined as the ability to "mount"
748  * the filesystem originally.  The rootvfs doesn't cover any
749  * vnodes; we attribute its ownership to the rootvp.
750  */
751 static int
752 secpolicy_fs_owner(cred_t *cr, const struct vfs *vfsp)
753 {
754 	vnode_t *mvp;
755 
756 	if (vfsp == NULL)
757 		mvp = NULL;
758 	else if (vfsp == rootvfs)
759 		mvp = rootvp;
760 	else
761 		mvp = vfsp->vfs_vnodecovered;
762 
763 	return (secpolicy_fs_common(cr, mvp, vfsp, NULL));
764 }
765 
766 int
767 secpolicy_fs_unmount(cred_t *cr, struct vfs *vfsp)
768 {
769 	return (secpolicy_fs_owner(cr, vfsp));
770 }
771 
772 /*
773  * Quotas are a resource, but if one has the ability to mount a filesystem, he
774  * should be able to modify quotas on it.
775  */
776 int
777 secpolicy_fs_quota(const cred_t *cr, const vfs_t *vfsp)
778 {
779 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
780 }
781 
782 /*
783  * Exceeding minfree: also a per-mount resource constraint.
784  */
785 int
786 secpolicy_fs_minfree(const cred_t *cr, const vfs_t *vfsp)
787 {
788 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
789 }
790 
791 int
792 secpolicy_fs_config(const cred_t *cr, const vfs_t *vfsp)
793 {
794 	return (secpolicy_fs_owner((cred_t *)cr, vfsp));
795 }
796 
797 /* ARGSUSED */
798 int
799 secpolicy_fs_linkdir(const cred_t *cr, const vfs_t *vfsp)
800 {
801 	return (PRIV_POLICY(cr, PRIV_SYS_LINKDIR, B_FALSE, EPERM, NULL));
802 }
803 
804 /*
805  * Name:        secpolicy_vnode_access()
806  *
807  * Parameters:  Process credential
808  *		vnode
809  *		uid of owner of vnode
810  *		permission bits not granted to the caller when examining
811  *		file mode bits (i.e., when a process wants to open a
812  *		mode 444 file for VREAD|VWRITE, this function should be
813  *		called only with a VWRITE argument).
814  *
815  * Normal:      Verifies that cred has the appropriate privileges to
816  *              override the mode bits that were denied.
817  *
818  * Override:    file_dac_execute - if VEXEC bit was denied and vnode is
819  *                      not a directory.
820  *              file_dac_read - if VREAD bit was denied.
821  *              file_dac_search - if VEXEC bit was denied and vnode is
822  *                      a directory.
823  *              file_dac_write - if VWRITE bit was denied.
824  *
825  *		Root owned files are special cased to protect system
826  *		configuration files and such.
827  *
828  * Output:      EACCES - if privilege check fails.
829  */
830 
831 /* ARGSUSED */
832 int
833 secpolicy_vnode_access(const cred_t *cr, vnode_t *vp, uid_t owner, mode_t mode)
834 {
835 	if ((mode & VREAD) && priv_policy_va(cr, PRIV_FILE_DAC_READ, B_FALSE,
836 	    EACCES, NULL, KLPDARG_VNODE, vp, (char *)NULL,
837 	    KLPDARG_NOMORE) != 0) {
838 		return (EACCES);
839 	}
840 
841 	if (mode & VWRITE) {
842 		boolean_t allzone;
843 
844 		if (owner == 0 && cr->cr_uid != 0)
845 			allzone = B_TRUE;
846 		else
847 			allzone = B_FALSE;
848 		if (priv_policy_va(cr, PRIV_FILE_DAC_WRITE, allzone, EACCES,
849 		    NULL, KLPDARG_VNODE, vp, (char *)NULL,
850 		    KLPDARG_NOMORE) != 0) {
851 			return (EACCES);
852 		}
853 	}
854 
855 	if (mode & VEXEC) {
856 		/*
857 		 * Directories use file_dac_search to override the execute bit.
858 		 */
859 		int p = vp->v_type == VDIR ? PRIV_FILE_DAC_SEARCH :
860 		    PRIV_FILE_DAC_EXECUTE;
861 
862 		return (priv_policy_va(cr, p, B_FALSE, EACCES, NULL,
863 		    KLPDARG_VNODE, vp, (char *)NULL, KLPDARG_NOMORE));
864 	}
865 	return (0);
866 }
867 
868 /*
869  * Name:	secpolicy_vnode_setid_modify()
870  *
871  * Normal:	verify that subject can set the file setid flags.
872  *
873  * Output:	EPERM - if not privileged.
874  */
875 
876 static int
877 secpolicy_vnode_setid_modify(const cred_t *cr, uid_t owner)
878 {
879 	/* If changing to suid root, must have all zone privs */
880 	boolean_t allzone = B_TRUE;
881 
882 	if (owner != 0) {
883 		if (owner == cr->cr_uid)
884 			return (0);
885 		allzone = B_FALSE;
886 	}
887 	return (PRIV_POLICY(cr, PRIV_FILE_SETID, allzone, EPERM, NULL));
888 }
889 
890 /*
891  * Are we allowed to retain the set-uid/set-gid bits when
892  * changing ownership or when writing to a file?
893  * "issuid" should be true when set-uid; only in that case
894  * root ownership is checked (setgid is assumed).
895  */
896 int
897 secpolicy_vnode_setid_retain(const cred_t *cred, boolean_t issuidroot)
898 {
899 	if (issuidroot && !HAS_ALLZONEPRIVS(cred))
900 		return (EPERM);
901 
902 	return (!PRIV_POLICY_CHOICE(cred, PRIV_FILE_SETID, B_FALSE));
903 }
904 
905 /*
906  * Name:	secpolicy_vnode_setids_setgids()
907  *
908  * Normal:	verify that subject can set the file setgid flag.
909  *
910  * Output:	EPERM - if not privileged
911  */
912 
913 int
914 secpolicy_vnode_setids_setgids(const cred_t *cred, gid_t gid)
915 {
916 	if (!groupmember(gid, cred))
917 		return (PRIV_POLICY(cred, PRIV_FILE_SETID, B_FALSE, EPERM,
918 		    NULL));
919 	return (0);
920 }
921 
922 /*
923  * Create a file with a group different than any of the groups allowed:
924  * the group of the directory the file is created in, the effective
925  * group or any of the supplementary groups.
926  */
927 int
928 secpolicy_vnode_create_gid(const cred_t *cred)
929 {
930 	if (HAS_PRIVILEGE(cred, PRIV_FILE_CHOWN))
931 		return (PRIV_POLICY(cred, PRIV_FILE_CHOWN, B_FALSE, EPERM,
932 		    NULL));
933 	else
934 		return (PRIV_POLICY(cred, PRIV_FILE_CHOWN_SELF, B_FALSE, EPERM,
935 		    NULL));
936 }
937 
938 /*
939  * Name:	secpolicy_vnode_utime_modify()
940  *
941  * Normal:	verify that subject can modify the utime on a file.
942  *
943  * Output:	EPERM - if access denied.
944  */
945 
946 static int
947 secpolicy_vnode_utime_modify(const cred_t *cred)
948 {
949 	return (PRIV_POLICY(cred, PRIV_FILE_OWNER, B_FALSE, EPERM,
950 	    "modify file times"));
951 }
952 
953 
954 /*
955  * Name:	secpolicy_vnode_setdac()
956  *
957  * Normal:	verify that subject can modify the mode of a file.
958  *		allzone privilege needed when modifying root owned object.
959  *
960  * Output:	EPERM - if access denied.
961  */
962 
963 int
964 secpolicy_vnode_setdac(const cred_t *cred, uid_t owner)
965 {
966 	if (owner == cred->cr_uid)
967 		return (0);
968 
969 	return (PRIV_POLICY(cred, PRIV_FILE_OWNER, owner == 0, EPERM, NULL));
970 }
971 /*
972  * Name:	secpolicy_vnode_stky_modify()
973  *
974  * Normal:	verify that subject can make a file a "sticky".
975  *
976  * Output:	EPERM - if access denied.
977  */
978 
979 int
980 secpolicy_vnode_stky_modify(const cred_t *cred)
981 {
982 	return (PRIV_POLICY(cred, PRIV_SYS_CONFIG, B_FALSE, EPERM,
983 	    "set file sticky"));
984 }
985 
986 /*
987  * Policy determines whether we can remove an entry from a directory,
988  * regardless of permission bits.
989  */
990 int
991 secpolicy_vnode_remove(const cred_t *cr)
992 {
993 	return (PRIV_POLICY(cr, PRIV_FILE_OWNER, B_FALSE, EACCES,
994 	    "sticky directory"));
995 }
996 
997 int
998 secpolicy_vnode_owner(const cred_t *cr, uid_t owner)
999 {
1000 	boolean_t allzone = (owner == 0);
1001 
1002 	if (owner == cr->cr_uid)
1003 		return (0);
1004 
1005 	return (PRIV_POLICY(cr, PRIV_FILE_OWNER, allzone, EPERM, NULL));
1006 }
1007 
1008 void
1009 secpolicy_setid_clear(vattr_t *vap, cred_t *cr)
1010 {
1011 	if ((vap->va_mode & (S_ISUID | S_ISGID)) != 0 &&
1012 	    secpolicy_vnode_setid_retain(cr,
1013 	    (vap->va_mode & S_ISUID) != 0 &&
1014 	    (vap->va_mask & AT_UID) != 0 && vap->va_uid == 0) != 0) {
1015 		vap->va_mask |= AT_MODE;
1016 		vap->va_mode &= ~(S_ISUID|S_ISGID);
1017 	}
1018 }
1019 
1020 int
1021 secpolicy_setid_setsticky_clear(vnode_t *vp, vattr_t *vap, const vattr_t *ovap,
1022     cred_t *cr)
1023 {
1024 	int error;
1025 
1026 	if ((vap->va_mode & S_ISUID) != 0 &&
1027 	    (error = secpolicy_vnode_setid_modify(cr,
1028 	    ovap->va_uid)) != 0) {
1029 		return (error);
1030 	}
1031 
1032 	/*
1033 	 * Check privilege if attempting to set the
1034 	 * sticky bit on a non-directory.
1035 	 */
1036 	if (vp->v_type != VDIR && (vap->va_mode & S_ISVTX) != 0 &&
1037 	    secpolicy_vnode_stky_modify(cr) != 0) {
1038 		vap->va_mode &= ~S_ISVTX;
1039 	}
1040 
1041 	/*
1042 	 * Check for privilege if attempting to set the
1043 	 * group-id bit.
1044 	 */
1045 	if ((vap->va_mode & S_ISGID) != 0 &&
1046 	    secpolicy_vnode_setids_setgids(cr, ovap->va_gid) != 0) {
1047 		vap->va_mode &= ~S_ISGID;
1048 	}
1049 
1050 	return (0);
1051 }
1052 
1053 #define	ATTR_FLAG_PRIV(attr, value, cr)	\
1054 	PRIV_POLICY(cr, value ? PRIV_FILE_FLAG_SET : PRIV_ALL, \
1055 	B_FALSE, EPERM, NULL)
1056 
1057 /*
1058  * Check privileges for setting xvattr attributes
1059  */
1060 int
1061 secpolicy_xvattr(xvattr_t *xvap, uid_t owner, cred_t *cr, vtype_t vtype)
1062 {
1063 	xoptattr_t *xoap;
1064 	int error = 0;
1065 
1066 	if ((xoap = xva_getxoptattr(xvap)) == NULL)
1067 		return (EINVAL);
1068 
1069 	/*
1070 	 * First process the DOS bits
1071 	 */
1072 	if (XVA_ISSET_REQ(xvap, XAT_ARCHIVE) ||
1073 	    XVA_ISSET_REQ(xvap, XAT_HIDDEN) ||
1074 	    XVA_ISSET_REQ(xvap, XAT_READONLY) ||
1075 	    XVA_ISSET_REQ(xvap, XAT_SYSTEM) ||
1076 	    XVA_ISSET_REQ(xvap, XAT_CREATETIME)) {
1077 		if ((error = secpolicy_vnode_owner(cr, owner)) != 0)
1078 			return (error);
1079 	}
1080 
1081 	/*
1082 	 * Now handle special attributes
1083 	 */
1084 
1085 	if (XVA_ISSET_REQ(xvap, XAT_IMMUTABLE))
1086 		error = ATTR_FLAG_PRIV(XAT_IMMUTABLE,
1087 		    xoap->xoa_immutable, cr);
1088 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_NOUNLINK))
1089 		error = ATTR_FLAG_PRIV(XAT_NOUNLINK,
1090 		    xoap->xoa_nounlink, cr);
1091 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_APPENDONLY))
1092 		error = ATTR_FLAG_PRIV(XAT_APPENDONLY,
1093 		    xoap->xoa_appendonly, cr);
1094 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_NODUMP))
1095 		error = ATTR_FLAG_PRIV(XAT_NODUMP,
1096 		    xoap->xoa_nodump, cr);
1097 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_OPAQUE))
1098 		error = EPERM;
1099 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_QUARANTINED)) {
1100 		error = ATTR_FLAG_PRIV(XAT_AV_QUARANTINED,
1101 		    xoap->xoa_av_quarantined, cr);
1102 		if (error == 0 && vtype != VREG && xoap->xoa_av_quarantined)
1103 			error = EINVAL;
1104 	}
1105 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_MODIFIED))
1106 		error = ATTR_FLAG_PRIV(XAT_AV_MODIFIED,
1107 		    xoap->xoa_av_modified, cr);
1108 	if (error == 0 && XVA_ISSET_REQ(xvap, XAT_AV_SCANSTAMP)) {
1109 		error = ATTR_FLAG_PRIV(XAT_AV_SCANSTAMP,
1110 		    xoap->xoa_av_scanstamp, cr);
1111 		if (error == 0 && vtype != VREG)
1112 			error = EINVAL;
1113 	}
1114 	return (error);
1115 }
1116 
1117 /*
1118  * This function checks the policy decisions surrounding the
1119  * vop setattr call.
1120  *
1121  * It should be called after sufficient locks have been established
1122  * on the underlying data structures.  No concurrent modifications
1123  * should be allowed.
1124  *
1125  * The caller must pass in unlocked version of its vaccess function
1126  * this is required because vop_access function should lock the
1127  * node for reading.  A three argument function should be defined
1128  * which accepts the following argument:
1129  * 	A pointer to the internal "node" type (inode *)
1130  *	vnode access bits (VREAD|VWRITE|VEXEC)
1131  *	a pointer to the credential
1132  *
1133  * This function makes the following policy decisions:
1134  *
1135  *		- change permissions
1136  *			- permission to change file mode if not owner
1137  *			- permission to add sticky bit to non-directory
1138  *			- permission to add set-gid bit
1139  *
1140  * The ovap argument should include AT_MODE|AT_UID|AT_GID.
1141  *
1142  * If the vap argument does not include AT_MODE, the mode will be copied from
1143  * ovap.  In certain situations set-uid/set-gid bits need to be removed;
1144  * this is done by marking vap->va_mask to include AT_MODE and va_mode
1145  * is updated to the newly computed mode.
1146  */
1147 
1148 int
1149 secpolicy_vnode_setattr(cred_t *cr, struct vnode *vp, struct vattr *vap,
1150 	const struct vattr *ovap, int flags,
1151 	int unlocked_access(void *, int, cred_t *),
1152 	void *node)
1153 {
1154 	int mask = vap->va_mask;
1155 	int error = 0;
1156 	boolean_t skipaclchk = (flags & ATTR_NOACLCHECK) ? B_TRUE : B_FALSE;
1157 
1158 	if (mask & AT_SIZE) {
1159 		if (vp->v_type == VDIR) {
1160 			error = EISDIR;
1161 			goto out;
1162 		}
1163 
1164 		/*
1165 		 * If ATTR_NOACLCHECK is set in the flags, then we don't
1166 		 * perform the secondary unlocked_access() call since the
1167 		 * ACL (if any) is being checked there.
1168 		 */
1169 		if (skipaclchk == B_FALSE) {
1170 			error = unlocked_access(node, VWRITE, cr);
1171 			if (error)
1172 				goto out;
1173 		}
1174 	}
1175 	if (mask & AT_MODE) {
1176 		/*
1177 		 * If not the owner of the file then check privilege
1178 		 * for two things: the privilege to set the mode at all
1179 		 * and, if we're setting setuid, we also need permissions
1180 		 * to add the set-uid bit, if we're not the owner.
1181 		 * In the specific case of creating a set-uid root
1182 		 * file, we need even more permissions.
1183 		 */
1184 		if ((error = secpolicy_vnode_setdac(cr, ovap->va_uid)) != 0)
1185 			goto out;
1186 
1187 		if ((error = secpolicy_setid_setsticky_clear(vp, vap,
1188 		    ovap, cr)) != 0)
1189 			goto out;
1190 	} else
1191 		vap->va_mode = ovap->va_mode;
1192 
1193 	if (mask & (AT_UID|AT_GID)) {
1194 		boolean_t checkpriv = B_FALSE;
1195 		int priv;
1196 		boolean_t allzone = B_FALSE;
1197 
1198 		/*
1199 		 * Chowning files.
1200 		 *
1201 		 * If you are the file owner:
1202 		 *	chown to other uid		FILE_CHOWN_SELF
1203 		 *	chown to gid (non-member) 	FILE_CHOWN_SELF
1204 		 *	chown to gid (member) 		<none>
1205 		 *
1206 		 * Instead of PRIV_FILE_CHOWN_SELF, FILE_CHOWN is also
1207 		 * acceptable but the first one is reported when debugging.
1208 		 *
1209 		 * If you are not the file owner:
1210 		 *	chown from root			PRIV_FILE_CHOWN + zone
1211 		 *	chown from other to any		PRIV_FILE_CHOWN
1212 		 *
1213 		 */
1214 		if (cr->cr_uid != ovap->va_uid) {
1215 			checkpriv = B_TRUE;
1216 			allzone = (ovap->va_uid == 0);
1217 			priv = PRIV_FILE_CHOWN;
1218 		} else {
1219 			if (((mask & AT_UID) && vap->va_uid != ovap->va_uid) ||
1220 			    ((mask & AT_GID) && vap->va_gid != ovap->va_gid &&
1221 			    !groupmember(vap->va_gid, cr))) {
1222 				checkpriv = B_TRUE;
1223 				priv = HAS_PRIVILEGE(cr, PRIV_FILE_CHOWN) ?
1224 				    PRIV_FILE_CHOWN : PRIV_FILE_CHOWN_SELF;
1225 			}
1226 		}
1227 		/*
1228 		 * If necessary, check privilege to see if update can be done.
1229 		 */
1230 		if (checkpriv &&
1231 		    (error = PRIV_POLICY(cr, priv, allzone, EPERM, NULL))
1232 		    != 0) {
1233 			goto out;
1234 		}
1235 
1236 		/*
1237 		 * If the file has either the set UID or set GID bits
1238 		 * set and the caller can set the bits, then leave them.
1239 		 */
1240 		secpolicy_setid_clear(vap, cr);
1241 	}
1242 	if (mask & (AT_ATIME|AT_MTIME)) {
1243 		/*
1244 		 * If not the file owner and not otherwise privileged,
1245 		 * always return an error when setting the
1246 		 * time other than the current (ATTR_UTIME flag set).
1247 		 * If setting the current time (ATTR_UTIME not set) then
1248 		 * unlocked_access will check permissions according to policy.
1249 		 */
1250 		if (cr->cr_uid != ovap->va_uid) {
1251 			if (flags & ATTR_UTIME)
1252 				error = secpolicy_vnode_utime_modify(cr);
1253 			else if (skipaclchk == B_FALSE) {
1254 				error = unlocked_access(node, VWRITE, cr);
1255 				if (error == EACCES &&
1256 				    secpolicy_vnode_utime_modify(cr) == 0)
1257 					error = 0;
1258 			}
1259 			if (error)
1260 				goto out;
1261 		}
1262 	}
1263 
1264 	/*
1265 	 * Check for optional attributes here by checking the following:
1266 	 */
1267 	if (mask & AT_XVATTR)
1268 		error = secpolicy_xvattr((xvattr_t *)vap, ovap->va_uid, cr,
1269 		    vp->v_type);
1270 out:
1271 	return (error);
1272 }
1273 
1274 /*
1275  * Name:	secpolicy_pcfs_modify_bootpartition()
1276  *
1277  * Normal:	verify that subject can modify a pcfs boot partition.
1278  *
1279  * Output:	EACCES - if privilege check failed.
1280  */
1281 /*ARGSUSED*/
1282 int
1283 secpolicy_pcfs_modify_bootpartition(const cred_t *cred)
1284 {
1285 	return (PRIV_POLICY(cred, PRIV_ALL, B_FALSE, EACCES,
1286 	    "modify pcfs boot partition"));
1287 }
1288 
1289 /*
1290  * System V IPC routines
1291  */
1292 int
1293 secpolicy_ipc_owner(const cred_t *cr, const struct kipc_perm *ip)
1294 {
1295 	if (crgetzoneid(cr) != ip->ipc_zoneid ||
1296 	    (cr->cr_uid != ip->ipc_uid && cr->cr_uid != ip->ipc_cuid)) {
1297 		boolean_t allzone = B_FALSE;
1298 		if (ip->ipc_uid == 0 || ip->ipc_cuid == 0)
1299 			allzone = B_TRUE;
1300 		return (PRIV_POLICY(cr, PRIV_IPC_OWNER, allzone, EPERM, NULL));
1301 	}
1302 	return (0);
1303 }
1304 
1305 int
1306 secpolicy_ipc_config(const cred_t *cr)
1307 {
1308 	return (PRIV_POLICY(cr, PRIV_SYS_IPC_CONFIG, B_FALSE, EPERM, NULL));
1309 }
1310 
1311 int
1312 secpolicy_ipc_access(const cred_t *cr, const struct kipc_perm *ip, mode_t mode)
1313 {
1314 
1315 	boolean_t allzone = B_FALSE;
1316 
1317 	ASSERT((mode & (MSG_R|MSG_W)) != 0);
1318 
1319 	if ((mode & MSG_R) &&
1320 	    PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0)
1321 		return (EACCES);
1322 
1323 	if (mode & MSG_W) {
1324 		if (cr->cr_uid != 0 && (ip->ipc_uid == 0 || ip->ipc_cuid == 0))
1325 			allzone = B_TRUE;
1326 
1327 		return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES,
1328 		    NULL));
1329 	}
1330 	return (0);
1331 }
1332 
1333 int
1334 secpolicy_rsm_access(const cred_t *cr, uid_t owner, mode_t mode)
1335 {
1336 	boolean_t allzone = B_FALSE;
1337 
1338 	ASSERT((mode & (MSG_R|MSG_W)) != 0);
1339 
1340 	if ((mode & MSG_R) &&
1341 	    PRIV_POLICY(cr, PRIV_IPC_DAC_READ, allzone, EACCES, NULL) != 0)
1342 		return (EACCES);
1343 
1344 	if (mode & MSG_W) {
1345 		if (cr->cr_uid != 0 && owner == 0)
1346 			allzone = B_TRUE;
1347 
1348 		return (PRIV_POLICY(cr, PRIV_IPC_DAC_WRITE, allzone, EACCES,
1349 		    NULL));
1350 	}
1351 	return (0);
1352 }
1353 
1354 /*
1355  * Audit configuration.
1356  */
1357 int
1358 secpolicy_audit_config(const cred_t *cr)
1359 {
1360 	return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL));
1361 }
1362 
1363 /*
1364  * Audit record generation.
1365  */
1366 int
1367 secpolicy_audit_modify(const cred_t *cr)
1368 {
1369 	return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM, NULL));
1370 }
1371 
1372 /*
1373  * Get audit attributes.
1374  * Either PRIV_SYS_AUDIT or PRIV_PROC_AUDIT required; report the
1375  * "Least" of the two privileges on error.
1376  */
1377 int
1378 secpolicy_audit_getattr(const cred_t *cr)
1379 {
1380 	if (!PRIV_POLICY_ONLY(cr, PRIV_SYS_AUDIT, B_FALSE)) {
1381 		return (PRIV_POLICY(cr, PRIV_PROC_AUDIT, B_FALSE, EPERM,
1382 		    NULL));
1383 	} else {
1384 		return (PRIV_POLICY(cr, PRIV_SYS_AUDIT, B_FALSE, EPERM, NULL));
1385 	}
1386 }
1387 
1388 
1389 /*
1390  * Locking physical memory
1391  */
1392 int
1393 secpolicy_lock_memory(const cred_t *cr)
1394 {
1395 	return (PRIV_POLICY(cr, PRIV_PROC_LOCK_MEMORY, B_FALSE, EPERM, NULL));
1396 }
1397 
1398 /*
1399  * Accounting (both acct(2) and exacct).
1400  */
1401 int
1402 secpolicy_acct(const cred_t *cr)
1403 {
1404 	return (PRIV_POLICY(cr, PRIV_SYS_ACCT, B_FALSE, EPERM, NULL));
1405 }
1406 
1407 /*
1408  * Is this process privileged to change its uids at will?
1409  * Uid 0 is still considered "special" and having the SETID
1410  * privilege is not sufficient to get uid 0.
1411  * Files are owned by root, so the privilege would give
1412  * full access and euid 0 is still effective.
1413  *
1414  * If you have the privilege and euid 0 only then do you
1415  * get the powers of root wrt uid 0.
1416  *
1417  * For gid manipulations, this is should be called with an
1418  * uid of -1.
1419  *
1420  */
1421 int
1422 secpolicy_allow_setid(const cred_t *cr, uid_t newuid, boolean_t checkonly)
1423 {
1424 	boolean_t allzone = B_FALSE;
1425 
1426 	if (newuid == 0 && cr->cr_uid != 0 && cr->cr_suid != 0 &&
1427 	    cr->cr_ruid != 0) {
1428 		allzone = B_TRUE;
1429 	}
1430 
1431 	return (checkonly ? !PRIV_POLICY_ONLY(cr, PRIV_PROC_SETID, allzone) :
1432 	    PRIV_POLICY(cr, PRIV_PROC_SETID, allzone, EPERM, NULL));
1433 }
1434 
1435 
1436 /*
1437  * Acting on a different process: if the mode is for writing,
1438  * the restrictions are more severe.  This is called after
1439  * we've verified that the uids do not match.
1440  */
1441 int
1442 secpolicy_proc_owner(const cred_t *scr, const cred_t *tcr, int mode)
1443 {
1444 	boolean_t allzone = B_FALSE;
1445 
1446 	if ((mode & VWRITE) && scr->cr_uid != 0 &&
1447 	    (tcr->cr_uid == 0 || tcr->cr_ruid == 0 || tcr->cr_suid == 0))
1448 		allzone = B_TRUE;
1449 
1450 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, allzone, EPERM, NULL));
1451 }
1452 
1453 int
1454 secpolicy_proc_access(const cred_t *scr)
1455 {
1456 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EACCES, NULL));
1457 }
1458 
1459 int
1460 secpolicy_proc_excl_open(const cred_t *scr)
1461 {
1462 	return (PRIV_POLICY(scr, PRIV_PROC_OWNER, B_FALSE, EBUSY, NULL));
1463 }
1464 
1465 int
1466 secpolicy_proc_zone(const cred_t *scr)
1467 {
1468 	return (PRIV_POLICY(scr, PRIV_PROC_ZONE, B_FALSE, EPERM, NULL));
1469 }
1470 
1471 /*
1472  * Destroying the system
1473  */
1474 
1475 int
1476 secpolicy_kmdb(const cred_t *scr)
1477 {
1478 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
1479 }
1480 
1481 int
1482 secpolicy_error_inject(const cred_t *scr)
1483 {
1484 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
1485 }
1486 
1487 /*
1488  * Processor sets, cpu configuration, resource pools.
1489  */
1490 int
1491 secpolicy_pset(const cred_t *cr)
1492 {
1493 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1494 }
1495 
1496 int
1497 secpolicy_ponline(const cred_t *cr)
1498 {
1499 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1500 }
1501 
1502 int
1503 secpolicy_pool(const cred_t *cr)
1504 {
1505 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1506 }
1507 
1508 int
1509 secpolicy_blacklist(const cred_t *cr)
1510 {
1511 	return (PRIV_POLICY(cr, PRIV_SYS_RES_CONFIG, B_FALSE, EPERM, NULL));
1512 }
1513 
1514 /*
1515  * Catch all system configuration.
1516  */
1517 int
1518 secpolicy_sys_config(const cred_t *cr, boolean_t checkonly)
1519 {
1520 	if (checkonly) {
1521 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_CONFIG, B_FALSE) ? 0 :
1522 		    EPERM);
1523 	} else {
1524 		return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1525 	}
1526 }
1527 
1528 /*
1529  * Zone administration (halt, reboot, etc.) from within zone.
1530  */
1531 int
1532 secpolicy_zone_admin(const cred_t *cr, boolean_t checkonly)
1533 {
1534 	if (checkonly) {
1535 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_ADMIN, B_FALSE) ? 0 :
1536 		    EPERM);
1537 	} else {
1538 		return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM,
1539 		    NULL));
1540 	}
1541 }
1542 
1543 /*
1544  * Zone configuration (create, halt, enter).
1545  */
1546 int
1547 secpolicy_zone_config(const cred_t *cr)
1548 {
1549 	/*
1550 	 * Require all privileges to avoid possibility of privilege
1551 	 * escalation.
1552 	 */
1553 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1554 }
1555 
1556 /*
1557  * Various other system configuration calls
1558  */
1559 int
1560 secpolicy_coreadm(const cred_t *cr)
1561 {
1562 	return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL));
1563 }
1564 
1565 int
1566 secpolicy_systeminfo(const cred_t *cr)
1567 {
1568 	return (PRIV_POLICY(cr, PRIV_SYS_ADMIN, B_FALSE, EPERM, NULL));
1569 }
1570 
1571 int
1572 secpolicy_dispadm(const cred_t *cr)
1573 {
1574 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1575 }
1576 
1577 int
1578 secpolicy_settime(const cred_t *cr)
1579 {
1580 	return (PRIV_POLICY(cr, PRIV_SYS_TIME, B_FALSE, EPERM, NULL));
1581 }
1582 
1583 /*
1584  * For realtime users: high resolution clock.
1585  */
1586 int
1587 secpolicy_clock_highres(const cred_t *cr)
1588 {
1589 	return (PRIV_POLICY(cr, PRIV_PROC_CLOCK_HIGHRES, B_FALSE, EPERM,
1590 	    NULL));
1591 }
1592 
1593 /*
1594  * drv_priv() is documented as callable from interrupt context, not that
1595  * anyone ever does, but still.  No debugging or auditing can be done when
1596  * it is called from interrupt context.
1597  * returns 0 on succes, EPERM on failure.
1598  */
1599 int
1600 drv_priv(cred_t *cr)
1601 {
1602 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1603 }
1604 
1605 int
1606 secpolicy_sys_devices(const cred_t *cr)
1607 {
1608 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1609 }
1610 
1611 int
1612 secpolicy_excl_open(const cred_t *cr)
1613 {
1614 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EBUSY, NULL));
1615 }
1616 
1617 int
1618 secpolicy_rctlsys(const cred_t *cr, boolean_t is_zone_rctl)
1619 {
1620 	/* zone.* rctls can only be set from the global zone */
1621 	if (is_zone_rctl && priv_policy_global(cr) != 0)
1622 		return (EPERM);
1623 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1624 }
1625 
1626 int
1627 secpolicy_resource(const cred_t *cr)
1628 {
1629 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1630 }
1631 
1632 /*
1633  * Processes with a real uid of 0 escape any form of accounting, much
1634  * like before.
1635  */
1636 int
1637 secpolicy_newproc(const cred_t *cr)
1638 {
1639 	if (cr->cr_ruid == 0)
1640 		return (0);
1641 
1642 	return (PRIV_POLICY(cr, PRIV_SYS_RESOURCE, B_FALSE, EPERM, NULL));
1643 }
1644 
1645 /*
1646  * Networking
1647  */
1648 int
1649 secpolicy_net_rawaccess(const cred_t *cr)
1650 {
1651 	return (PRIV_POLICY(cr, PRIV_NET_RAWACCESS, B_FALSE, EACCES, NULL));
1652 }
1653 
1654 /*
1655  * Need this privilege for accessing the ICMP device
1656  */
1657 int
1658 secpolicy_net_icmpaccess(const cred_t *cr)
1659 {
1660 	return (PRIV_POLICY(cr, PRIV_NET_ICMPACCESS, B_FALSE, EACCES, NULL));
1661 }
1662 
1663 /*
1664  * There are a few rare cases where the kernel generates ioctls() from
1665  * interrupt context with a credential of kcred rather than NULL.
1666  * In those cases, we take the safe and cheap test.
1667  */
1668 int
1669 secpolicy_net_config(const cred_t *cr, boolean_t checkonly)
1670 {
1671 	if (checkonly) {
1672 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE) ?
1673 		    0 : EPERM);
1674 	} else {
1675 		return (PRIV_POLICY(cr, PRIV_SYS_NET_CONFIG, B_FALSE, EPERM,
1676 		    NULL));
1677 	}
1678 }
1679 
1680 
1681 /*
1682  * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_IP_CONFIG.
1683  *
1684  * There are a few rare cases where the kernel generates ioctls() from
1685  * interrupt context with a credential of kcred rather than NULL.
1686  * In those cases, we take the safe and cheap test.
1687  */
1688 int
1689 secpolicy_ip_config(const cred_t *cr, boolean_t checkonly)
1690 {
1691 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE))
1692 		return (secpolicy_net_config(cr, checkonly));
1693 
1694 	if (checkonly) {
1695 		return (PRIV_POLICY_ONLY(cr, PRIV_SYS_IP_CONFIG, B_FALSE) ?
1696 		    0 : EPERM);
1697 	} else {
1698 		return (PRIV_POLICY(cr, PRIV_SYS_IP_CONFIG, B_FALSE, EPERM,
1699 		    NULL));
1700 	}
1701 }
1702 
1703 /*
1704  * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_DL_CONFIG.
1705  */
1706 int
1707 secpolicy_dl_config(const cred_t *cr)
1708 {
1709 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NET_CONFIG, B_FALSE))
1710 		return (secpolicy_net_config(cr, B_FALSE));
1711 	return (PRIV_POLICY(cr, PRIV_SYS_DL_CONFIG, B_FALSE, EPERM,
1712 	    NULL));
1713 }
1714 
1715 
1716 /*
1717  * Map IP pseudo privileges to actual privileges.
1718  * So we don't need to recompile IP when we change the privileges.
1719  */
1720 int
1721 secpolicy_ip(const cred_t *cr, int netpriv, boolean_t checkonly)
1722 {
1723 	int priv = PRIV_ALL;
1724 
1725 	switch (netpriv) {
1726 	case OP_CONFIG:
1727 		priv = PRIV_SYS_IP_CONFIG;
1728 		break;
1729 	case OP_RAW:
1730 		priv = PRIV_NET_RAWACCESS;
1731 		break;
1732 	case OP_PRIVPORT:
1733 		priv = PRIV_NET_PRIVADDR;
1734 		break;
1735 	}
1736 	ASSERT(priv != PRIV_ALL);
1737 	if (checkonly)
1738 		return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM);
1739 	else
1740 		return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL));
1741 }
1742 
1743 /*
1744  * Map network pseudo privileges to actual privileges.
1745  * So we don't need to recompile IP when we change the privileges.
1746  */
1747 int
1748 secpolicy_net(const cred_t *cr, int netpriv, boolean_t checkonly)
1749 {
1750 	int priv = PRIV_ALL;
1751 
1752 	switch (netpriv) {
1753 	case OP_CONFIG:
1754 		priv = PRIV_SYS_NET_CONFIG;
1755 		break;
1756 	case OP_RAW:
1757 		priv = PRIV_NET_RAWACCESS;
1758 		break;
1759 	case OP_PRIVPORT:
1760 		priv = PRIV_NET_PRIVADDR;
1761 		break;
1762 	}
1763 	ASSERT(priv != PRIV_ALL);
1764 	if (checkonly)
1765 		return (PRIV_POLICY_ONLY(cr, priv, B_FALSE) ? 0 : EPERM);
1766 	else
1767 		return (PRIV_POLICY(cr, priv, B_FALSE, EPERM, NULL));
1768 }
1769 
1770 /*
1771  * Checks for operations that are either client-only or are used by
1772  * both clients and servers.
1773  */
1774 int
1775 secpolicy_nfs(const cred_t *cr)
1776 {
1777 	return (PRIV_POLICY(cr, PRIV_SYS_NFS, B_FALSE, EPERM, NULL));
1778 }
1779 
1780 /*
1781  * Special case for opening rpcmod: have NFS privileges or network
1782  * config privileges.
1783  */
1784 int
1785 secpolicy_rpcmod_open(const cred_t *cr)
1786 {
1787 	if (PRIV_POLICY_ONLY(cr, PRIV_SYS_NFS, B_FALSE))
1788 		return (secpolicy_nfs(cr));
1789 	else
1790 		return (secpolicy_net_config(cr, NULL));
1791 }
1792 
1793 int
1794 secpolicy_chroot(const cred_t *cr)
1795 {
1796 	return (PRIV_POLICY(cr, PRIV_PROC_CHROOT, B_FALSE, EPERM, NULL));
1797 }
1798 
1799 int
1800 secpolicy_tasksys(const cred_t *cr)
1801 {
1802 	return (PRIV_POLICY(cr, PRIV_PROC_TASKID, B_FALSE, EPERM, NULL));
1803 }
1804 
1805 /*
1806  * Basic privilege checks.
1807  */
1808 int
1809 secpolicy_basic_exec(const cred_t *cr, vnode_t *vp)
1810 {
1811 	return (priv_policy_va(cr, PRIV_PROC_EXEC, B_FALSE, EPERM, NULL,
1812 	    KLPDARG_VNODE, vp, (char *)NULL, KLPDARG_NOMORE));
1813 }
1814 
1815 int
1816 secpolicy_basic_fork(const cred_t *cr)
1817 {
1818 	return (PRIV_POLICY(cr, PRIV_PROC_FORK, B_FALSE, EPERM, NULL));
1819 }
1820 
1821 int
1822 secpolicy_basic_proc(const cred_t *cr)
1823 {
1824 	return (PRIV_POLICY(cr, PRIV_PROC_SESSION, B_FALSE, EPERM, NULL));
1825 }
1826 
1827 /*
1828  * Slightly complicated because we don't want to trigger the policy too
1829  * often.  First we shortcircuit access to "self" (tp == sp) or if
1830  * we don't have the privilege but if we have permission
1831  * just return (0) and we don't flag the privilege as needed.
1832  * Else, we test for the privilege because we either have it or need it.
1833  */
1834 int
1835 secpolicy_basic_procinfo(const cred_t *cr, proc_t *tp, proc_t *sp)
1836 {
1837 	if (tp == sp ||
1838 	    !HAS_PRIVILEGE(cr, PRIV_PROC_INFO) && prochasprocperm(tp, sp, cr)) {
1839 		return (0);
1840 	} else {
1841 		return (PRIV_POLICY(cr, PRIV_PROC_INFO, B_FALSE, EPERM, NULL));
1842 	}
1843 }
1844 
1845 int
1846 secpolicy_basic_link(const cred_t *cr)
1847 {
1848 	return (PRIV_POLICY(cr, PRIV_FILE_LINK_ANY, B_FALSE, EPERM, NULL));
1849 }
1850 
1851 /*
1852  * Additional device protection.
1853  *
1854  * Traditionally, a device has specific permissions on the node in
1855  * the filesystem which govern which devices can be opened by what
1856  * processes.  In certain cases, it is desirable to add extra
1857  * restrictions, as writing to certain devices is identical to
1858  * having a complete run of the system.
1859  *
1860  * This mechanism is called the device policy.
1861  *
1862  * When a device is opened, its policy entry is looked up in the
1863  * policy cache and checked.
1864  */
1865 int
1866 secpolicy_spec_open(const cred_t *cr, struct vnode *vp, int oflag)
1867 {
1868 	devplcy_t *plcy;
1869 	int err;
1870 	struct snode *csp = VTOS(common_specvp(vp));
1871 	priv_set_t pset;
1872 
1873 	mutex_enter(&csp->s_lock);
1874 
1875 	if (csp->s_plcy == NULL || csp->s_plcy->dp_gen != devplcy_gen) {
1876 		plcy = devpolicy_find(vp);
1877 		if (csp->s_plcy)
1878 			dpfree(csp->s_plcy);
1879 		csp->s_plcy = plcy;
1880 		ASSERT(plcy != NULL);
1881 	} else
1882 		plcy = csp->s_plcy;
1883 
1884 	if (plcy == nullpolicy) {
1885 		mutex_exit(&csp->s_lock);
1886 		return (0);
1887 	}
1888 
1889 	dphold(plcy);
1890 
1891 	mutex_exit(&csp->s_lock);
1892 
1893 	if (oflag & FWRITE)
1894 		pset = plcy->dp_wrp;
1895 	else
1896 		pset = plcy->dp_rdp;
1897 	/*
1898 	 * Special case:
1899 	 * PRIV_SYS_NET_CONFIG is a superset of PRIV_SYS_IP_CONFIG.
1900 	 * If PRIV_SYS_NET_CONFIG is present and PRIV_SYS_IP_CONFIG is
1901 	 * required, replace PRIV_SYS_IP_CONFIG with PRIV_SYS_NET_CONFIG
1902 	 * in the required privilege set before doing the check.
1903 	 */
1904 	if (priv_ismember(&pset, PRIV_SYS_IP_CONFIG) &&
1905 	    priv_ismember(&CR_OEPRIV(cr), PRIV_SYS_NET_CONFIG) &&
1906 	    !priv_ismember(&CR_OEPRIV(cr), PRIV_SYS_IP_CONFIG)) {
1907 		priv_delset(&pset, PRIV_SYS_IP_CONFIG);
1908 		priv_addset(&pset, PRIV_SYS_NET_CONFIG);
1909 	}
1910 
1911 	err = secpolicy_require_set(cr, &pset, "devpolicy");
1912 	dpfree(plcy);
1913 
1914 	return (err);
1915 }
1916 
1917 int
1918 secpolicy_modctl(const cred_t *cr, int cmd)
1919 {
1920 	switch (cmd) {
1921 	case MODINFO:
1922 	case MODGETMAJBIND:
1923 	case MODGETPATH:
1924 	case MODGETPATHLEN:
1925 	case MODGETNAME:
1926 	case MODGETFBNAME:
1927 	case MODGETDEVPOLICY:
1928 	case MODGETDEVPOLICYBYNAME:
1929 	case MODDEVT2INSTANCE:
1930 	case MODSIZEOF_DEVID:
1931 	case MODGETDEVID:
1932 	case MODSIZEOF_MINORNAME:
1933 	case MODGETMINORNAME:
1934 	case MODGETDEVFSPATH_LEN:
1935 	case MODGETDEVFSPATH:
1936 	case MODGETDEVFSPATH_MI_LEN:
1937 	case MODGETDEVFSPATH_MI:
1938 		/* Unprivileged */
1939 		return (0);
1940 	case MODLOAD:
1941 	case MODSETDEVPOLICY:
1942 		return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1943 	default:
1944 		return (secpolicy_sys_config(cr, B_FALSE));
1945 	}
1946 }
1947 
1948 int
1949 secpolicy_console(const cred_t *cr)
1950 {
1951 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1952 }
1953 
1954 int
1955 secpolicy_power_mgmt(const cred_t *cr)
1956 {
1957 	return (PRIV_POLICY(cr, PRIV_SYS_DEVICES, B_FALSE, EPERM, NULL));
1958 }
1959 
1960 /*
1961  * Simulate terminal input; another escalation of privileges avenue.
1962  */
1963 
1964 int
1965 secpolicy_sti(const cred_t *cr)
1966 {
1967 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
1968 }
1969 
1970 boolean_t
1971 secpolicy_net_reply_equal(const cred_t *cr)
1972 {
1973 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1974 }
1975 
1976 int
1977 secpolicy_swapctl(const cred_t *cr)
1978 {
1979 	return (PRIV_POLICY(cr, PRIV_SYS_CONFIG, B_FALSE, EPERM, NULL));
1980 }
1981 
1982 int
1983 secpolicy_cpc_cpu(const cred_t *cr)
1984 {
1985 	return (PRIV_POLICY(cr, PRIV_CPC_CPU, B_FALSE, EACCES, NULL));
1986 }
1987 
1988 /*
1989  * secpolicy_contract_identity
1990  *
1991  * Determine if the subject may set the process contract FMRI value
1992  */
1993 int
1994 secpolicy_contract_identity(const cred_t *cr)
1995 {
1996 	return (PRIV_POLICY(cr, PRIV_CONTRACT_IDENTITY, B_FALSE, EPERM, NULL));
1997 }
1998 
1999 /*
2000  * secpolicy_contract_observer
2001  *
2002  * Determine if the subject may observe a specific contract's events.
2003  */
2004 int
2005 secpolicy_contract_observer(const cred_t *cr, struct contract *ct)
2006 {
2007 	if (contract_owned(ct, cr, B_FALSE))
2008 		return (0);
2009 	return (PRIV_POLICY(cr, PRIV_CONTRACT_OBSERVER, B_FALSE, EPERM, NULL));
2010 }
2011 
2012 /*
2013  * secpolicy_contract_observer_choice
2014  *
2015  * Determine if the subject may observe any contract's events.  Just
2016  * tests privilege and audits on success.
2017  */
2018 boolean_t
2019 secpolicy_contract_observer_choice(const cred_t *cr)
2020 {
2021 	return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_OBSERVER, B_FALSE));
2022 }
2023 
2024 /*
2025  * secpolicy_contract_event
2026  *
2027  * Determine if the subject may request critical contract events or
2028  * reliable contract event delivery.
2029  */
2030 int
2031 secpolicy_contract_event(const cred_t *cr)
2032 {
2033 	return (PRIV_POLICY(cr, PRIV_CONTRACT_EVENT, B_FALSE, EPERM, NULL));
2034 }
2035 
2036 /*
2037  * secpolicy_contract_event_choice
2038  *
2039  * Determine if the subject may retain contract events in its critical
2040  * set when a change in other terms would normally require a change in
2041  * the critical set.  Just tests privilege and audits on success.
2042  */
2043 boolean_t
2044 secpolicy_contract_event_choice(const cred_t *cr)
2045 {
2046 	return (PRIV_POLICY_CHOICE(cr, PRIV_CONTRACT_EVENT, B_FALSE));
2047 }
2048 
2049 /*
2050  * secpolicy_gart_access
2051  *
2052  * Determine if the subject has sufficient priveleges to make ioctls to agpgart
2053  * device.
2054  */
2055 int
2056 secpolicy_gart_access(const cred_t *cr)
2057 {
2058 	return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM, NULL));
2059 }
2060 
2061 /*
2062  * secpolicy_gart_map
2063  *
2064  * Determine if the subject has sufficient priveleges to map aperture range
2065  * through agpgart driver.
2066  */
2067 int
2068 secpolicy_gart_map(const cred_t *cr)
2069 {
2070 	if (PRIV_POLICY_ONLY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE)) {
2071 		return (PRIV_POLICY(cr, PRIV_GRAPHICS_ACCESS, B_FALSE, EPERM,
2072 		    NULL));
2073 	} else {
2074 		return (PRIV_POLICY(cr, PRIV_GRAPHICS_MAP, B_FALSE, EPERM,
2075 		    NULL));
2076 	}
2077 }
2078 
2079 /*
2080  * secpolicy_zinject
2081  *
2082  * Determine if the subject can inject faults in the ZFS fault injection
2083  * framework.  Requires all privileges.
2084  */
2085 int
2086 secpolicy_zinject(const cred_t *cr)
2087 {
2088 	return (secpolicy_require_set(cr, PRIV_FULLSET, NULL));
2089 }
2090 
2091 /*
2092  * secpolicy_zfs
2093  *
2094  * Determine if the subject has permission to manipulate ZFS datasets
2095  * (not pools).  Equivalent to the SYS_MOUNT privilege.
2096  */
2097 int
2098 secpolicy_zfs(const cred_t *cr)
2099 {
2100 	return (PRIV_POLICY(cr, PRIV_SYS_MOUNT, B_FALSE, EPERM, NULL));
2101 }
2102 
2103 /*
2104  * secpolicy_idmap
2105  *
2106  * Determine if the calling process has permissions to register an SID
2107  * mapping daemon and allocate ephemeral IDs.
2108  */
2109 int
2110 secpolicy_idmap(const cred_t *cr)
2111 {
2112 	return (PRIV_POLICY(cr, PRIV_FILE_SETID, B_TRUE, EPERM, NULL));
2113 }
2114 
2115 /*
2116  * secpolicy_ucode_update
2117  *
2118  * Determine if the subject has sufficient privilege to update microcode.
2119  */
2120 int
2121 secpolicy_ucode_update(const cred_t *scr)
2122 {
2123 	return (PRIV_POLICY(scr, PRIV_ALL, B_FALSE, EPERM, NULL));
2124 }
2125 
2126 /*
2127  * secpolicy_sadopen
2128  *
2129  * Determine if the subject has sufficient privilege to access /dev/sad/admin.
2130  * /dev/sad/admin appear in global zone and exclusive-IP zones only.
2131  * In global zone, sys_config is required.
2132  * In exclusive-IP zones, sys_ip_config is required.
2133  * Note that sys_config is prohibited in non-global zones.
2134  */
2135 int
2136 secpolicy_sadopen(const cred_t *credp)
2137 {
2138 	priv_set_t pset;
2139 
2140 	priv_emptyset(&pset);
2141 
2142 	if (crgetzoneid(credp) == GLOBAL_ZONEID)
2143 		priv_addset(&pset, PRIV_SYS_CONFIG);
2144 	else
2145 		priv_addset(&pset, PRIV_SYS_IP_CONFIG);
2146 
2147 	return (secpolicy_require_set(credp, &pset, "devpolicy"));
2148 }
2149 
2150 
2151 /*
2152  * Add privileges to a particular privilege set; this is called when the
2153  * current sets of privileges are not sufficient.  I.e., we should always
2154  * call the policy override functions from here.
2155  * What we are allowed to have is in the Observed Permitted set; so
2156  * we compute the difference between that and the newset.
2157  */
2158 int
2159 secpolicy_require_privs(const cred_t *cr, const priv_set_t *nset)
2160 {
2161 	priv_set_t rqd;
2162 
2163 	rqd = CR_OPPRIV(cr);
2164 
2165 	priv_inverse(&rqd);
2166 	priv_intersect(nset, &rqd);
2167 
2168 	return (secpolicy_require_set(cr, &rqd, NULL));
2169 }
2170 
2171 /*
2172  * secpolicy_smb
2173  *
2174  * Determine if the cred_t has PRIV_SYS_SMB privilege, indicating
2175  * that it has permission to access the smbsrv kernel driver.
2176  * PRIV_POLICY checks the privilege and audits the check.
2177  *
2178  * Returns:
2179  * 0       Driver access is allowed.
2180  * EPERM   Driver access is NOT permitted.
2181  */
2182 int
2183 secpolicy_smb(const cred_t *cr)
2184 {
2185 	return (PRIV_POLICY(cr, PRIV_SYS_SMB, B_FALSE, EPERM, NULL));
2186 }
2187 
2188 /*
2189  * secpolicy_vscan
2190  *
2191  * Determine if cred_t has the necessary privileges to access a file
2192  * for virus scanning and update its extended system attributes.
2193  * PRIV_FILE_DAC_SEARCH, PRIV_FILE_DAC_READ - file access
2194  * PRIV_FILE_FLAG_SET - set extended system attributes
2195  *
2196  * PRIV_POLICY checks the privilege and audits the check.
2197  *
2198  * Returns:
2199  * 0      file access for virus scanning allowed.
2200  * EPERM  file access for virus scanning is NOT permitted.
2201  */
2202 int
2203 secpolicy_vscan(const cred_t *cr)
2204 {
2205 	if ((PRIV_POLICY(cr, PRIV_FILE_DAC_SEARCH, B_FALSE, EPERM, NULL)) ||
2206 	    (PRIV_POLICY(cr, PRIV_FILE_DAC_READ, B_FALSE, EPERM, NULL)) ||
2207 	    (PRIV_POLICY(cr, PRIV_FILE_FLAG_SET, B_FALSE, EPERM, NULL))) {
2208 		return (EPERM);
2209 	}
2210 
2211 	return (0);
2212 }
2213 
2214 /*
2215  * secpolicy_smbfs_login
2216  *
2217  * Determines if the caller can add and delete the smbfs login
2218  * password in the the nsmb kernel module for the CIFS client.
2219  *
2220  * Returns:
2221  * 0       access is allowed.
2222  * EPERM   access is NOT allowed.
2223  */
2224 int
2225 secpolicy_smbfs_login(const cred_t *cr, uid_t uid)
2226 {
2227 	uid_t cruid = crgetruid(cr);
2228 
2229 	if (cruid == uid)
2230 		return (0);
2231 	return (PRIV_POLICY(cr, PRIV_PROC_OWNER, B_FALSE,
2232 	    EPERM, NULL));
2233 }
2234 
2235 /*
2236  * secpolicy_xvm_control
2237  *
2238  * Determines if a caller can control the xVM hypervisor and/or running
2239  * domains (x86 specific).
2240  *
2241  * Returns:
2242  * 0       access is allowed.
2243  * EPERM   access is NOT allowed.
2244  */
2245 int
2246 secpolicy_xvm_control(const cred_t *cr)
2247 {
2248 	if (PRIV_POLICY(cr, PRIV_XVM_CONTROL, B_FALSE, EPERM, NULL))
2249 		return (EPERM);
2250 	return (0);
2251 }
2252